Light-Responsive Hierarchically Structured Liquid Crystal Polymer Networks for Harnessing Cell Adhesion and Migration

Photo-activated dynamic isomerization induced large density changes in liquid crystal polymers: A molecular dynamics study

We use molecular dynamics simulations to unravel the physics underpinning the light-induced density changes caused by the dynamic trans-cis-trans isomerization cycles of azo-mesogens embedded in a liquid crystal polymer network, an intriguing experimental observation reported in the literature. We employ two approaches, cyclic and probabilistic switching of isomers, to simulate dynamic isomerization. The cyclic switching of isomers confirms that dynamic isomerization can lead to density changes at specific switch-time intervals. The probabilistic switching approach further deciphers the physics behind the non-monotonous relation between density reduction and light intensities observed in experiments. Light intensity variations in experiments are accounted for in simulations by varying the trans-cis and cis-trans isomerization probabilities. The simulations show that an optimal combination of these two probabilities results in a maximum density reduction, corroborating the experimental observations. At such an optimal combination of probabilities, the dynamic trans-cis-trans isomerization cycles occur at a specific frequency, causing significant distortion in the polymer network, resulting in a maximum density reduction.

Shape-Morphing Photoresponsive Hydrogels Reveal Dynamic Topographical Conditioning of Fibroblasts

The extracellular environment defines a physical boundary condition with which cells interact. However, to date, cell response to geometrical environmental cues is largely studied in static settings, which fails to capture the spatiotemporally varying cues cells receive in native tissues. Here, a photoresponsive spiropyran-based hydrogel is presented as a dynamic, cell-compatible, and reconfigurable substrate. Local stimulation with blue light (455 nm) alters hydrogel swelling, resulting in on-demand reversible micrometer-scale changes in surface topography within 15 min, allowing investigation into cell response to controlled geometry actuations. At short term (1 h after actuation), fibroblasts respond to multiple rounds of recurring topographical changes by reorganizing their nucleus and focal adhesions (FA). FAs form primarily at the dynamic regions of the hydrogel; however, this propensity is abolished when the topography is reconfigured from grooves to pits, demonstrating that topographical changes dynamically condition fibroblasts. Further, this dynamic conditioning is found to be associated with long-term (72 h) maintenance of focal adhesions and epigenetic modifications. Overall, this study offers a new approach to dissect the dynamic interplay between cells and their microenvironment and shines a new light on the cell's ability to adapt to topographical changes through FA-based mechanotransduction.

Liquid Crystal Materials for Biomedical Applications

Liquid crystal is a state of matter being intermediate between solid and liquid. Liquid crystal materials exhibit both orientational order and fluidity. While liquid crystals have long been highly recognized in the display industry, in recent decades, liquid crystals provide new opportunities into the cross-field of material science and biomedicine due to their biocompatibility, multifunctionality, and responsiveness. In this review, the latest achievements of liquid crystal materials applied in biomedical fields are summarized. The start is made by introducing the basic concepts of liquid crystals, and then shifting to the components of liquid crystals as well as functional materials derived therefrom. After that, the ongoing and foreseeable applications of liquid crystal materials in the biomedical field with emphasis put on several cutting-edge aspects, including drug delivery, bioimaging, tissue engineering, implantable devices, biosensing, and wearable devices are discussed. It is hoped that this review will stimulate ingenious ideas for the future generation of liquid crystal-based drug development, artificial implants, disease diagnosis, health status monitoring, and beyond.

Shape Morphing by Topological Patterns and Profiles in Laser-Cut Liquid Crystal Elastomer Kirigami

Programming shape changes in soft materials requires precise control of the directionality and magnitude of their mechanical response. Among ordered soft materials, liquid crystal elastomers (LCEs) exhibit remarkable and programmable shape shifting when their molecular order changes. In this work, we synthesized, remotely programmed, and modeled reversible and complex morphing in monolithic LCE kirigami encoded with predesigned topological patterns in its microstructure. We obtained a rich variety of out-of-plane shape transformations, including auxetic structures and undulating morphologies, by combining different topological microstructures and kirigami geometries. The spatiotemporal shape-shifting behaviors are well recapitulated by elastodynamics simulations, revealing that the complex shape changes arise from integrating the custom-cut geometry with local director profiles defined by topological defects inscribed in the material. Different functionalities, such as a bioinspired fluttering butterfly, a flower bud, dual-rotation light mills, and dual-mode locomotion, are further realized. Our proposed LCE kirigami with topological patterns opens opportunities for the future development of multifunctional devices for soft robotics, flexible electronics, and biomedicine.

Near-Infrared Light-Responsive Size-Selective Lateral Flow Chip for Single-Cell Manipulation of Circulating Tumor Cells

Accurately obtaining information on the heterogeneity of CTCs at the single-cell level is a very challenging task that may facilitate cancer pathogenesis research and personalized therapy. However, commonly used multicellular population capture and release assays tend to lose effective information on heterogeneity and cannot accurately assess molecular-level studies and drug resistance assessment of CTCs in different stages of tumor metastasis. Herein, we designed a near-infrared (NIR) light-responsive microfluidic chip for biocompatible single-cell manipulation and study the heterogeneity of CTCs by a combination of the lateral flow microarray (LFM) chip and photothermal response system. First, immunomagnetic labeling and a gradient magnetic field were combined to distribute CTCs in different regions of the chip according to the content of surface markers. Subsequently, the LFM chip achieves high single-cell capture efficiency and purity (even as low as 5 CTCs per milliliter of blood) under the influence of lateral fluid and magnetic fields. Due to the rapid dissolution of the gelatin capture structure at 37 °C and the photothermal properties of gold nanorods, the captured single CTC cell can be recovered in large quantities at physiological temperature or released individually at a specific point by NIR. The multifunctional NIR-responsive LFM chip demonstrates excellent performance in capture and site release of CTCs with high viability, which provides a robust and versatile means for CTCs heterogeneity study at the single-cell level.

Light-responsive self-assembled microstructures of branched polyethyleneimine at low pH

Soft materials comprising polyethyleneimine (PEI), which integrate low pH-stimulated higher-order assemblies (fibres and sheets) with light responsiveness, have been shown. Excitation wavelength light-driven interactions enable the formation of bead-necklace-type structures in fibres or volume collapse of sheets. This work can have significant implications for transfection or encapsulation through PEI-based complexes.

Photo-Programmed Deformations in Rigid Liquid Crystalline Polymers Triggered by Body Temperature

Deformations triggered by body heat are desirable in the context of shape-morphing applications because, under the majority of circumstances, the human body maintains a higher temperature than that of its surroundings. However, at present, this bioenergy-triggered action is primarily limited to soft polymeric networks. Thus, herein, the programming of body temperature-triggered deformations into rigid azobenzene-containing liquid crystalline polymers (azo-LCPs) with a glass-transition temperature of 100 °C is demonstrated. To achieve this, a mechano-assisted photo-programming strategy is used to create a metastable state with room-temperature stable residual stress, which is induced by the isomerization of azobenzene. The programmed rigid azo-LCP can undergo large-amplitude body temperature-triggered shape changes within minutes and can be regenerated without any performance degradation. By changing the programming photomasks and irradiation conditions employed, various 2D to 3D shape-morphing architectures, including folded clips, inch-worm structures, spiral structures, and snap-through motions are achieved. When programmed with polarized light, the proposed strategy results in domain-selective activation, generating designed characteristics in multi-domain azo-LCPs. The reported strategy is therefore expected to broaden the applications of azo-LCPs in the fields of biomedical and flexible microelectronic devices.

Soft nano and microstructures for the photomodulation of cellular signaling and behavior

Photoresponsive soft materials are everywhere in the nature, from human's retina tissues to plants, and have been the inspiration for engineers in the development of modern biomedical materials. Light as an external stimulus is particularly attractive because it is relatively cheap, noninvasive to superficial biological tissues, can be delivered contactless and offers high spatiotemporal control. In the biomedical field, soft materials that respond to long wavelength or that incorporate a photon upconversion mechanism are desired to overcome the limited UV-visible light penetration into biological tissues. Upon light exposure, photosensitive soft materials respond through mechanisms of isomerization, crosslinking or cleavage, hyperthermia, photoreactions, electrical current generation, among others. In this review, we discuss the most recent applications of photosensitive soft materials in the modulation of cellular behavior, for tissue engineering and regenerative medicine, in drug delivery and for phototherapies.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

Recyclable Periodic Nanostructure Formed by Sublimable Liquid Crystals for Robust Cell Alignment

We demonstrate a facile method to fabricate a recyclable cell-alignment scaffold using nanogrooves based on sublimable liquid crystal (LC) material. Randomly and uniaxially arranged smectic LC structures are obtained, followed by sublimation and recondensation processes, which directly produce periodic nanogrooves with dimensions of a couple of hundreds of nanometers. After treatment with osmium tetroxide (OsO₄), the nanogroove can serve as a scaffold to efficiently induce directed cell growth without causing cytotoxicity, and it can be used repeatedly. Together, various cell types are applied to the nanogroove, proving the scaffold's broad applicability. Depending on the nanotopography of the LC structures, cells exhibit different morphologies and gene expression patterns, compared to cells on standard glass substrates, according to microscopic observation and qPCR. Furthermore, cell sheets can be formed, which consist of oriented cells that can be repeatedly formed and transferred to other substrates, while maintaining its organization. We believe that our cell-aligning scaffold may pave the way for the soft material field to bioengineering, which can involve fundamentals in cell behavior and function, as well as applications for regenerative medicine.

Nematic Templated Complex Nanofiber Structures by Projection Display

Oriented arrays of nanofibers are ubiquitous in nature and have been widely used in recreation of the biological functions such as bone and muscle tissue regenerations. However, it remains a challenge to produce nanofiber arrays with a complex organization by using current fabrication techniques such as electrospinning and extrusion. In this work, we propose a method to fabricate the complex organization of nanofiber structures templated by a spatially varying ordered liquid crystal host, which follows the pattern produced by a maskless projection display system. By programming the synchronization of the rotated polarizer and projected segments with different shapes, various configurations of nanofiber organization ranging from a single to two-dimensional lattice of arbitrary topological defects are created in a deterministic manner. The nanofiber arrays can effectively guide and promote neurite outgrowth. The application of nanofibers with arced profiles and topological defects on neural tissue organization is also demonstrated. This finding, combined with the versatility and programmability of nanofiber structures, suggests that they will help solve challenges in nerve repair, neural regeneration, and other related tissue engineering fields.

Liquid Crystals: Versatile Self-Organized Smart Soft Materials

Smart soft materials are envisioned to be the building blocks of the next generation of advanced devices and digitally augmented technologies. In this context, liquid crystals (LCs) owing to their responsive and adaptive attributes could serve as promising smart soft materials. LCs played a critical role in revolutionizing the information display industry in the 20th century. However, in the turn of the 21st century, numerous beyond-display applications of LCs have been demonstrated, which elegantly exploit their controllable stimuli-responsive and adaptive characteristics. For these applications, new LC materials have been rationally designed and developed. In this Review, we present the recent developments in light driven chiral LCs, i.e., cholesteric and blue phases, LC based smart windows that control the entrance of heat and light from outdoor to the interior of buildings and built environments depending on the weather conditions, LC elastomers for bioinspired, biological, and actuator applications, LC based biosensors for detection of proteins, nucleic acids, and viruses, LC based porous membranes for the separation of ions, molecules, and microbes, living LCs, and LCs under macro- and nanoscopic confinement. The Review concludes with a summary and perspectives on the challenges and opportunities for LCs as smart soft materials. This Review is anticipated to stimulate eclectic ideas toward the implementation of the nature's delicate phase of matter in future generations of smart and augmented devices and beyond.

Light-Switching Surface Wettability of Chiral Liquid Crystal Networks by Dynamic Change in Nanoscale Topography

Nano- and microscale morphology endows surfaces that play conspicuous roles in natural or artificial objects with unique functions. Surfaces with dynamic regulating features capable of switching the structures, patterns, and even dimensions of their surface profiles can control friction and wettability, thus having potential applications in antibacterial, haptics, and fluid dynamics. Here, a freestanding film with light-switchable surface based on cholesteric liquid crystal networks is presented to translate 2D flat plane into a 3D nanometer-scale topography. The wettability of the interface can be controlled by hiding or revealing the geometrical features of the surfaces with light. This reversible dynamic actuation is obtained through the order parameter change of the periodic cholesteric organization under a photoalignment procedure and lithography-free mode. Complex tailored structures can be used to encrypt tactile information and improve wettability by predesigning the orientation distribution of liquid crystal director. This rapid switching nanoprecision smart surface provides a novel platform for artificial skin, optics, and functional coatings.

Mechanistically Scoping Cell-Free and Cell-Dependent Artificial Scaffolds in Rebuilding Skeletal and Dental Hard Tissues

Rebuilding mineralized tissues in skeletal and dental systems remains costly and challenging. Despite numerous demands and heavy clinical burden over the world, sources of autografts, allografts, and xenografts are far limited, along with massive risks including viral infections, ethic crisis, and so on. Per such dilemma, artificial scaffolds have emerged to provide efficient alternatives. To date, cell-free biomimetic mineralization (BM) and cell-dependent scaffolds have both demonstrated promising capabilities of regenerating mineralized tissues. However, BM and cell-dependent scaffolds have distinctive mechanisms for mineral genesis, which makes them methodically, synthetically, and functionally disparate. Herein, these two strategies in regenerative dentistry and orthopedics are systematically summarized at the level of mechanisms. For BM, methodological and theoretical advances are focused upon; and meanwhile, for cell-dependent scaffolds, it is demonstrated how scaffolds orchestrate osteogenic cell fate. The summary of the experimental advances and clinical progress will endow researchers with mechanistic understandings of artificial scaffolds in rebuilding hard tissues, by which better clinical choices and research directions may be approached.

High-throughput screening and rational design of biofunctionalized surfaces with optimized biocompatibility and antimicrobial activity

Peptides are widely used for surface modification to develop improved implants, such as cell adhesion RGD peptide and antimicrobial peptide (AMP). However, it is a daunting challenge to identify an optimized condition with the two peptides showing their intended activities and the parameters for reaching such a condition. Herein, we develop a high-throughput strategy, preparing titanium (Ti) surfaces with a gradient in peptide density by click reaction as a platform, to screen the positions with desired functions. Such positions are corresponding to optimized molecular parameters (peptide densities/ratios) and associated preparation parameters (reaction times/reactant concentrations). These parameters are then extracted to prepare nongradient mono- and dual-peptide functionalized Ti surfaces with desired biocompatibility or/and antimicrobial activity in vitro and in vivo. We also demonstrate this strategy could be extended to other materials. Here, we show that the high-throughput versatile strategy holds great promise for rational design and preparation of functional biomaterial surfaces.

Design of nematic liquid crystals to control microscale dynamics

The dynamics of small particles, both living such as swimming bacteria and inanimate, such as colloidal spheres, has fascinated scientists for centuries. If one could learn how to control and streamline their chaotic motion, that would open technological opportunities in the transformation of stored or environmental energy into systematic motion, with applications in micro-robotics, transport of matter, guided morphogenesis. This review presents an approach to command microscale dynamics by replacing an isotropic medium with a liquid crystal. Orientational order and associated properties, such as elasticity, surface anchoring, and bulk anisotropy, enable new dynamic effects, ranging from the appearance and propagation of particle-like solitary waves to self-locomotion of an active droplet. By using photoalignment, the liquid crystal can be patterned into predesigned structures. In the presence of the electric field, these patterns enable the transport of solid and fluid particles through nonlinear electrokinetics rooted in anisotropy of conductivity and permittivity. Director patterns command the dynamics of swimming bacteria, guiding their trajectories, polarity of swimming, and distribution in space. This guidance is of a higher level of complexity than a simple following of the director by rod-like microorganisms. Namely, the director gradients mediate hydrodynamic interactions of bacteria to produce an active force and collective polar modes of swimming. The patterned director could also be engraved in a liquid crystal elastomer. When an elastomer coating is activated by heat or light, these patterns produce a deterministic surface topography. The director gradients define an activation force that shapes the elastomer in a manner similar to the active stresses triggering flows in active nematics. The patterned elastomer substrates could be used to define the orientation of cells in living tissues. The liquid-crystal guidance holds a major promise in achieving the goal of commanding microscale active flows.

Exploiting Substrate Cues for Co-Culturing Cells in a Micropattern

Spatial distribution of cells and their interactions between neighboring cells in native microenvironments are of fundamental importance in determining cell fate decisions such as migration, growth, and differentiation. Controlling the spatial distribution of different cell types in defined geometries can replicate these native environments, which can be a useful model for several studies. While spatiotemporal control over multiple cell arrangements is required to achieve the complex tissue architecture, unfortunately, conventional cell patterning techniques usually allow only single patterning with a single cell type. In the present study, we introduce a simple lithographic method to pattern multiple cell types in a spatially controlled manner by utilizing the biophysical cues present at the corners of the patterned geometry. By fabricating micropatterns of different shapes, we demonstrate how the cell can be constrained to pattern along the corners of patterned geometries owing to the presence of topographical cues, leaving empty voids in the center that can be further utilized for patterning a second cell type. We also demonstrate that the cell alignment along the pattern is a dynamic process and the cells migrate from a more uniform cell-adhesive region toward the topographical cues. The cytoskeleton arrangement was geometry-dependent, which was confirmed through a series of in vitro evaluations, such as scanning electron microscopy and fluorescence microscopy. These findings have not only helped us in exploring the importance of these cues in guiding the cell fate but have also allowed us to develop a technique, which self-patterns the cells without any expensive exogenous cues and can be used as a model protocol to eventually organize cells into a specific pattern with micron-scale precision in vitro.

A Lyotropic Liquid Crystal from a Flexible Oligopeptide Amphiphile in Dimethyl Sulfoxide

Despite the rapid progress in peptide liquid crystals (LCs) due to their prominent properties, our investigation on flexible peptide-based LCs is incomplete, mainly resulted from their unclear formation mechanisms and unexploited applications in organic solvents. Here, we develop a lyotropic LC based on a flexible oligopeptide amphiphile, which aggregates into aligned cylinder-like nanostructures in dimethyl sulfoxide (DMSO). The formation mechanism of lyotropic LC in DMSO was probed by the experimental investigation and molecular dynamics simulation, indicating that the hydrogen bonding and hydrophobic and electrostatic interactions contribute to the formation of ordered nanostructures in the organic solvent. Arising from the orientational order and suitable fluidity, we exploit the application of lyotropic LC as an aligned medium to measure the residual dipolar couplings of bioactive molecules. This study not only offers the understanding of the mechanism to create LC systems without rigid aromatic groups but also expands the applications of ordered bottom-up nanomaterials in organic solvents.

Dynamic azopolymeric interfaces for photoactive cell instruction

The ability to affect a wide range of biophysical properties through the use of light has led to the development of dynamic cell instructive materials. Using photoresponsive materials such as azopolymers, smart systems that use external, minimally damaging, light irradiation can be used to trigger specific surface morpho-physical properties in the presence of living cells. The interaction of light with an azopolymer film induces a mass migration phenomenon, allowing a variety of topographic patterns to be embossed on the polymeric film. Photoisomerization induces conformational changes at the molecular and macroscopic scale, resulting in light-induced variations of substrate morphological, physical, and mechanical properties. In this review, we discuss the photoactuation of azopolymeric interfaces to provide guidelines for the engineering and design of azopolymer films. Laser micropatterning for the modulation of azopolymer surfaces is examined as a way to diversify the capabilities of these polymers in cellular systems. Mass migration effects induced by azopolymer switching provides a foundation for performing a broad range of cellular manipulation techniques. Applications of azopolymers are explored in the context of dynamic culture systems, gaining insight into the complex processes involved in dynamic cell-material interactions. The review highlights azopolymers as a candidate for various applications in cellular control, including cell alignment, migration, gene expression, and others. Recent advances have underlined the importance of these systems in applications regarding three-dimensional cell culture and stem cell morphology. Azopolymers can be used not only to manipulate cells but also to probe for mechanistic studies of cellular crosstalk in response to chemical and mechanical stimuli.

DNA Self-Switchable Microlaser

Advances in switchable microlasers have emerged as a building block with immense potential in controlling light-matter interactions and integrated photonics. Compared to artificially designed interfaces, a stimuli-responsive biointerface enables a higher level of functionalities and versatile ways of tailoring optical responses at the nanoscale. However, switching laser emission with biological recognition has yet to be addressed, particularly with reversibility and wavelength tunability over a broad spectral range. Here we demonstrate a self-switchable laser exploiting the biointerface between label-free DNA molecules and dye-doped liquid crystal matrix in a Fabry-Perot microcavity. Laser emission switching among different wavelengths was achieved by utilizing DNA conformation changes as the switching power, which alters the orientation of the liquid crystals. Our findings demonstrate that different concentrations of single-stranded DNA lead to different temporal switching of lasing wavelengths and intensities. The lasing wavelength could be reverted upon binding with the complementary sequence through DNA hybridization process. Both experimental and theoretical studies revealed that absorption strength is the key mechanism accounting for the laser shifting behavior. This study represents a milestone in achieving a biologically controlled laser, shedding light on the development of programmable photonic devices at the sub-nanoscale by exploiting the complexity and self-recognition of biomolecules.

Spatiotemporal regulation of dynamic cell microenvironment signals based on an azobenzene photoswitch

Dynamic biochemical and biophysical signals of cellular matrix define and regulate tissue-specific cell functions and fate. To recapitulate this complex environment in vitro, biomaterials based on structural- or degradation-tunable polymers have emerged as powerful platforms for regulating the "on-demand" cell-material dynamic interplay. As one of the most prevalent photoswitch molecules, the photoisomerization of azobenzene demonstrates a unique advantage in the construction of dynamic substrates. Moreover, the development of azobenzene-containing biomaterials is particularly helpful in elucidating cells that adapt to a dynamic microenvironment or integrate spatiotemporal variations of signals. Herein, this minireview, places emphasis on the research progress of azobenzene photoswitches in the dynamic regulation of matrix signals. Some techniques and material design methods have been discussed to provide some theoretical guidance for the rational and efficient design of azopolymer-based material platforms. In addition, considering that the UV-light response of traditional azobenzene photoswitches is not conducive to biological applications, we have summarized the recent approaches to red-shifting the light wavelength for azobenzene activation.

How levelling and scan line corrections ruin roughness measurement and how to prevent it

Surface roughness plays an important role in various fields of nanoscience and nanotechnology. However, the present practices in roughness measurements, typically based on some Atomic Force Microscopy measurements for nanometric roughness or optical or mechanical profilometry for larger scale roughness significantly bias the results. Such biased values are present in nearly all the papers dealing with surface parameters, in the areas of nanotechnology, thin films or material science. Surface roughness, most typically root mean square value of irregularities Sq is often used parameter that is used to control the technologies or to link the surface properties with other material functionality. The error in estimated values depends on the ratio between scan size and roughness correlation length and on the way how the data are processed and can easily be larger than 10% without us noting anything suspicious. Here we present a survey of how large is the problem, detailed analysis of its nature and suggest methods to predict the error in roughness measurements and possibly to correct them. We also present a guidance for choosing suitable scan area during the measurement.

Interfacial nanoarchitectonics for responsive cellular biosystems

The living cell can be regarded as an ideal functional material system in which many functional systems are working together with high efficiency and specificity mostly under mild ambient conditions. Fabrication of living cell-like functional materials is regarded as one of the final goals of the nanoarchitectonics approach. In this short review article, material-based approaches for regulation of living cell behaviors by external stimuli are discussed. Nanoarchitectonics strategies on cell regulation by various external inputs are first exemplified. Recent approaches on cell regulation with interfacial nanoarchitectonics are also discussed in two extreme cases using a very hard interface with nanoarchitected carbon arrays and a fluidic interface of the liquid-liquid interface. Importance of interfacial nanoarchitectonics in controlling living cells by mechanical and supramolecular stimuli from the interfaces is demonstrated.

Self-Healable Porous Polyampholyte Hydrogels with Higher Water Content as Cell Culture Scaffolds for Tissue Engineering Applications

In this paper, we first demonstrate the control of the film pore size using neutral hydrophilic 2-hydroxyethyl methacrylate (HEMA) content. To improve the mechanical properties of a polyampholyte (PA), both HEMA and the cross-linker N,N'-methylenebisacrylamide (Bis-Am) were introduced into the PA chain. The predesigned copolymers showed great mechanical properties and optical behavior. The introduction of HEMA significantly increased the water content of the polymer, leading to the formation of porous structures in xerogels. The dynamic interaction between the positive and negative termini of the PA endowed the hydrogels with self-healing ability. The synthesized chemically cross-linked PA gels showed high stability in saline solution. The biocompatibility of the PA gels was confirmed using a cytotoxicity test of cells attached to the synthesized PA-X-2 and PA/HEMA-90/10-X-0.5. The results of this investigation indicate that the synthesized PA gels are applicable as a polymeric scaffold for cell culture.

Photoactive Interfaces for Spatio-Temporal Guidance of Mesenchymal Stem Cell Fate

Patterned surfaces have proved effective in guiding stem cells commitment to a specific lineage by presenting highly ordered biophysical/biochemical cues at the cellmaterial interface. Their potency in controlling cell fate can be significantly empowered by encoding logic of space and time control of signal presentation. Here, azopolymeric photoactive interfaces are proposed to present/withdraw morphophysical signals to living cells using a green light trigger in a non-invasive spatio-temporal controlled way. To assess the potency of these dynamic platforms in controlling cell decision and fate, topography changes are actuated by light at specific times to reverse the fate of otherwise committed human mesenchymal stem cells (hMSC) toward osteoblastic lineage. It is first proved by dynamic change from ordered parallel patterning to flat or grid surfaces, that it is possible to induce cyclic cellular and nuclear stretches. Furthermore, by culturing hMSCs on a specific pattern known to prime them toward osteoblast lineage, the possibility to reroute or reverse stem cell fate decision by dynamic modulation of morphophysical signal is proved. To conclude, dynamic topographies can control the spatial conformation of hMSCs, modulate lineage reversal even after several weeks of culture and redirect lineage specification in response to light-induced changes in the microenvironment.

Controlled Dynamics of Neural Tumor Cells by Templated Liquid Crystalline Polymer Networks

The ability to control the alignment and organization of cell populations has great potential for tissue engineering and regenerative medicine. A variety of approaches such as nano/microtopographical patterning, mechanical loading, and nanocomposite synthesis have been developed to engineer scaffolds able to control cellular properties and behaviors. In this work, a patterned liquid crystal polymer network (LCN) film is synthesized by using a nematic liquid crystal template in which the molecular orientations are predesigned by photopatterning technique. Various configurations of polymer networks such as linear and circular patterns are created. When neural tumor cells are plated onto the templated LCN films, the cell alignment, migration, and proliferation are directed in both linear and curvilinear fashions following the pattern of the aligned polymer chains. A complex LCN pattern with zigzag geometry is also fabricated and found to be capable of controlling cell alignment and collective cellular organization. The demonstrated control of cell dynamics and organization by LCN films with various molecular alignments opens new opportunities to design scaffolds to control cultured cell organization in a manner resembling that found in tissues and to develop novel advanced materials for nerve repair, tissue engineering, and regenerative medicine applications.

Topology control of human fibroblast cells monolayer by liquid crystal elastomer

Eukaryotic cells in living tissues form dynamic patterns with spatially varying orientational order that affects important physiological processes such as apoptosis and cell migration. The challenge is how to impart a predesigned map of orientational order onto a growing tissue. Here, we demonstrate an approach to produce cell monolayers of human dermal fibroblasts with predesigned orientational patterns and topological defects using a photoaligned liquid crystal elastomer (LCE) that swells anisotropically in an aqueous medium. The patterns inscribed into the LCE are replicated by the tissue monolayer and cause a strong spatial variation of cells phenotype, their surface density, and number density fluctuations. Unbinding dynamics of defect pairs intrinsic to active matter is suppressed by anisotropic surface anchoring allowing the estimation of the elastic characteristics of the tissues. The demonstrated patterned LCE approach has potential to control the collective behavior of cells in living tissues, cell differentiation, and tissue morphogenesis.

Electroplasticization of Liquid Crystal Polymer Networks

Shape-shifting liquid crystal networks (LCNs) can transform their morphology and properties in response to external stimuli. These active and adaptive polymer materials can have impact in a diversity of fields, including haptic displays, energy harvesting, biomedicine, and soft robotics. Electrically driven transformations in LCN coatings are particularly promising for application in electronic devices, in which electrodes are easily integrated and allow for patterning of the functional response. The morphing of these coatings, which are glassy in the absence of an electric field, relies on a complex interplay between polymer viscoelasticity, liquid crystal order, and electric field properties. Morphological transformations require the material to undergo a glass transition that plasticizes the polymer sufficiently to enable volumetric and shape changes. Understanding how an alternating current can plasticize very stiff, densely cross-linked networks remains an unresolved challenge. Here, we use a nanoscale strain detection method to elucidate this electric-field-induced devitrification of LCNs. We find how a high-frequency alternating field gives rise to pronounced nanomechanical changes at a critical frequency, which signals the electrical glass transition. Across this transition, collective motion of the liquid crystal molecules causes the network to yield from within, leading to network weakening and subsequent nonlinear expansion. These results unambiguously prove the existence of electroplasticization. Fine-tuning the induced emergence of plasticity will not only enhance the surface functionality but also enable more efficient conversion of electrical energy into mechanical work.

Reconfigurable Surface with Photodefinable Physicochemical Properties for User-Designable Cell Scaffolds

Surfaces with specific topography and chemical composition are quite useful in many applications ranging from functional interfaces to cell incubation scaffolds. Although these surfaces can be easily fabricated by combining topography-construction methods and surface-functionalization strategies, their properties are often static after fabrication or merely switchable between "on" and "off" states. Developing surfaces that can be on-demand regulated are quite important for the generation of smart surfaces for future applications. In this paper, we present a reconfigurable surface with adjustable topography and chemical functionality utilizing the photodynamic feature of the disulfide bond. Structured surfaces, composed of disulfide-cross-linked polymer networks, were prepared by using disulfide-containing methacrylate as the monomer. We show that the topography and chemical functionality of the surface can be on-demand regulated after its fabrication, with 254 and 365 nm UV light, respectively, allowing to "define" the physicochemical properties of the surface using light before the usage. We also demonstrate the application of such surface as a user-designable cell scaffold, that different cell scaffolds can be generated from one original surface with a simple exposure process, to define the desired bioactivity onto every point of the surface and therefore exactly control cell behaviors on the scaffold.

Cell alignment by smectic liquid crystal elastomer coatings with nanogrooves

Control of cells behavior through topography of substrates is an important theme in biomedical applications. Among many materials used as substrates, polymers show advantages since they can be tailored by chemical functionalization. Fabrication of polymer substrates with nano- and microscale topography requires processing by lithography, microprinting, etching, and so forth. In this work, we introduce a different approach based on anisotropic elastic properties of polymerized smectic A (SmA) liquid crystal elastomer (LCE). When the SmA liquid crystal coating is deposited onto a substrate with planar alignment of the molecules, it develops nanogrooves at its free surface. After photopolymerization, these nanogrooves show an excellent ability to align human dermal fibroblasts over large areas. The alignment quality is good for both bare SmA LCE substrates and for substrates coated with fibronectin. The SmA LCE nano-topographies show a high potential for tissue engineering.

Design of Collective Motions from Synthetic Molecular Switches, Rotors, and Motors

Precise control over molecular movement is of fundamental and practical importance in physics, biology, and chemistry. At nanoscale, the peculiar functioning principles and the synthesis of individual molecular actuators and machines has been the subject of intense investigations and debates over the past 60 years. In this review, we focus on the design of collective motions that are achieved by integrating, in space and time, several or many of these individual mechanical units together. In particular, we provide an in-depth look at the intermolecular couplings used to physically connect a number of artificial mechanically active molecular units such as photochromic molecular switches, nanomachines based on mechanical bonds, molecular rotors, and light-powered rotary motors. We highlight the various functioning principles that can lead to their collective motion at various length scales. We also emphasize how their synchronized, or desynchronized, mechanical behavior can lead to emerging functional properties and to their implementation into new active devices and materials.

Near-infrared light-responsive hydrogels via peroxide-decorated MXene-initiated polymerization

Two-dimensional MXene Ti3C2T x nanosheets with peroxide decoration (p-Ti3C2T x ) are synthesized by a sonication-assisted MILD etching method. The obtained MXenes can generate hydroxyl radical species and act as an initiator for free-radical polymerization of a series of acrylic monomers without the use of light illumination or co-initiators. The monomers analyzed include acrylamide, N-isopropylacrylamide (NIPAM), N,N-dimethylacrylamide, methyl methacrylate, and hydroxyethyl methacrylate. By simply mixing N-isopropylacrylamide monomers and p-Ti3C2T x nanosheets under deoxygenated conditions, PNIPAM-based nanocomposite hydrogels are synthesized using a high concentration of the monomer. The nanocomposite hydrogels have a photothermal conversion efficiency of 34.7% and photothermal stability superior to that of pristine Ti3C2T x . Taking advantage of the thermal responsive behavior of PNIPAM, the nanocomposite hydrogels are successfully exploited as remotely near-infrared light controlled "smart" windows, fluidic valves and photodetectors.

Morphing of liquid crystal surfaces by emergent collectivity

Liquid crystal surfaces can undergo topographical morphing in response to external cues. These shape-shifting coatings promise a revolution in various applications, from haptic feedback in soft robotics or displays to self-cleaning solar panels. The changes in surface topography can be controlled by tailoring the molecular architecture and mechanics of the liquid crystal network. However, the nanoscopic mechanisms that drive morphological transitions remain unclear. Here, we introduce a frequency-resolved nanostrain imaging method to elucidate the emergent dynamics underlying field-induced shape-shifting. We show how surface morphing occurs in three distinct stages: (i) the molecular dipoles oscillate with the alternating field (10-100 ms), (ii) this leads to collective plasticization of the glassy network (~1 s), (iii) culminating in actuation of the topography (10-100 s). The first stage appears universal and governed by dielectric coupling. By contrast, yielding and deformation rely on a delicate balance between liquid crystal order, field properties and network viscoelasticity.

Driving Cells with Light-Controlled Topographies

Cell-substrate interactions can modulate cellular behaviors in a variety of biological contexts, including development and disease. Light-responsive materials have been recently proposed to engineer active substrates with programmable topographies directing cell adhesion, migration, and differentiation. However, current approaches are affected by either fabrication complexity, limitations in the extent of mechanical stimuli, lack of full spatio-temporal control, or ease of use. Here, a platform exploiting light to plastically deform micropatterned polymeric substrates is presented. Topographic changes with remarkable relief depths in the micron range are induced in parallel, by illuminating the sample at once, without using raster scanners. In few tens of seconds, complex topographies are instructed on demand, with arbitrary spatial distributions over a wide range of spatial and temporal scales. Proof-of-concept data on breast cancer cells and normal kidney epithelial cells are presented. Both cell types adhere and proliferate on substrates without appreciable cell damage upon light-induced substrate deformations. User-provided mechanical stimulation aligns and guides cancer cells along the local deformation direction and constrains epithelial colony growth by biasing cell division orientation. This approach is easy to implement on general-purpose optical microscopy systems and suitable for use in cell biology in a wide variety of applications.

Controlled Placement of Microparticles at the Water-Liquid Crystal Elastomer Interface

Controlled placement of microparticles is of prime importance in production of microscale superstructures. In this work, we demonstrate the remote control of microparticle placement using a photoactivated surface profile of a liquid crystal elastomer (LCE) coating. We employ light-responsive LCEs with preimposed patterns of molecular orientation (director) in the plane of coating. Upon UV illumination, these in-plane director distortions translate into deterministic topographic change of the LCE coating. Microparticles placed at the interface between the LCE coating and water, guided by gravity, gather at the bottom of photoinduced troughs. The effect is reversible: when the substrates are irradiated with visible light, the coatings become flat and the microparticle arrays disorganize again. The proposed noncontact manipulation of particles by photoactivated LCEs may be useful in development of drug delivery or tissue engineering applications.

The Pathway to Intelligence: Using Stimuli-Responsive Materials as Building Blocks for Constructing Smart and Functional Systems

Systems that are intelligent have the ability to sense their surroundings, analyze, and respond accordingly. In nature, many biological systems are considered intelligent (e.g., humans, animals, and cells). For man-made systems, artificial intelligence is achieved by massively sophisticated electronic machines (e.g., computers and robots operated by advanced algorithms). On the other hand, freestanding materials (i.e., not tethered to a power supply) are usually passive and static. Hence, herein, the question is asked: can materials be fabricated so that they are intelligent? One promising approach is to use stimuli-responsive materials; these "smart" materials use the energy supplied by a stimulus available from the surrounding for performing a corresponding action. After decades of research, many interesting stimuli-responsive materials that can sense and perform smart functions have been developed. Classes of functions discussed include practical functions (e.g., targeting and motion), regulatory functions (e.g., self-regulation and amplification), and analytical processing functions (e.g., memory and computing). The pathway toward creating truly intelligent materials can involve incorporating a combination of these different types of functions into a single integrated system by using stimuli-responsive materials as the basic building blocks.

Liquid Crystal-Induced Myoblast Alignment

The ability to control cell alignment represents a fundamental requirement toward the production of tissue in vitro but also to create biohybrid materials presenting the functional properties of human organs. However, cell cultures on standard commercial supports do not provide a selective control on the cell organization morphology, and different techniques, such as the use of patterned or stimulated substrates, are developed to induce cellular alignment. In this work, a new approach toward in vitro muscular tissue morphogenesis is presented exploiting liquid crystalline networks. By using smooth polymeric films with planar homogeneous alignment, a certain degree of cellular order is observed in myoblast cultures with direction of higher cell alignment corresponding to the nematic director. The molecular organization inside the polymer determines such effects since no cell organization is observed using homeotropic or isotropic samples. These findings represent the first example of cellular alignment induced by the interaction with a nematic polymeric scaffold, setting the stage for new applications of liquid crystal polymers as active matter to control tissue growth.

Topographical patterning: characteristics of current processing techniques, controllable effects on material properties and co-cultured cell fate, updated applications in tissue engineering, and improvement strategies

Topographical patterning has recently attracted lots of attention in regulating cell fate, understanding the mechanism of cell–microenvironment interactions, and solving the great issues of regenerative medicine.

Spatio-Temporal Control of Cell Adhesion: Toward Programmable Platforms to Manipulate Cell Functions and Fate

Biophysical and biochemical signals of material surfaces potently regulate cell functions and fate. In particular, micro- and nano-scale patterns of adhesion signals can finely elicit and affect a plethora of signaling pathways ultimately affecting gene expression, in a process known as mechanotransduction. Our fundamental understanding of cell-material signals interaction and reaction is based on static culturing platforms, i.e., substrates exhibiting signals whose configuration is time-invariant. However, cells in-vivo are exposed to arrays of biophysical and biochemical signals that change in time and space and the way cells integrate these might eventually dictate their behavior. Advancements in fabrication technologies and materials engineering, have recently enabled the development of culturing platforms able to display patterns of biochemical and biophysical signals whose features change in time and space in response to external stimuli and according to selected programmes. These dynamic devices proved to be particularly helpful in shedding light on how cells adapt to a dynamic microenvironment or integrate spatio-temporal variations of signals. In this work, we present the most relevant findings in the context of dynamic platforms for controlling cell functions and fate in vitro. We place emphasis on the technological aspects concerning the fabrication of platforms displaying micro- and nano-scale dynamic signals and on the physical-chemical stimuli necessary to actuate the spatio-temporal changes of the signal patterns. In particular, we illustrate strategies to encode material surfaces with dynamic ligands and patterns thereof, topographic relieves and mechanical properties. Additionally, we present the most effective, yet cytocompatible methods to actuate the spatio-temporal changes of the signals. We focus on cell reaction and response to dynamic changes of signal presentation. Finally, potential applications of this new generation of culturing systems for in vitro and in vivo applications, including regenerative medicine and cell conditioning are presented.

Re- and Preconfigurable Multistable Visible Light Responsive Surface Topographies

Light responsive materials that are able to change their shape are becoming increasingly important. However, preconfigurable bistable or even multi-stable visible light responsive coatings have not been reported yet. Such materials will require less energy to actuate and will have a longer lifetime. Here, it is shown that fluorinated azobenzenes can be used to create rewritable and pre-configurable responsive surfaces that show multi-stable topographies. These surface structures can be formed and removed by using low intensity green and blue light, respectively. Multistable preconfigured surface topographies can also be created in the absence of a mask. The method allows for full control over the surface structures as the topographical changes are directly linked to the molecular isomerization processes. Preliminary studies reveal that these light responsive materials are suitable as adaptive biological surfaces.

An In Situ Reversible Heterodimeric Nanoswitch Controlled by Metal-Ion-Ligand Coordination Regulates the Mechanosensing and Differentiation of Stem Cells

In situ and cytocompatible nanoswitching by external stimuli is highly appealing for reversibly regulating cellular adhesion and functions in vivo. Here, a heterodimeric nanoswitch is designed to facilitate in situ switchable and combinatorial presentation of integrin-binding cell-adhesive moieties, such as Mg²⁺ and Arg-Gly-Asp (RGD) ligand in nanostructures. In situ reversible nanoswitching is controlled by convertible coordination between bioactive Mg²⁺ and bisphosphonate (BP) ligand. A BP-coated gold-nanoparticle monomer (BP-AuNP) on a substrate is prepared to allow in situ assembly of cell-adhesive Mg²⁺ -active Mg-BP nanoparticles (NPs) on a BP-AuNP surface via Mg²⁺ -BP coordination, yielding heterodimeric nanostructures (switching "ON"). Ethylenediaminetetraacetic acid (EDTA)-based Mg²⁺ chelation allows in situ disassembly of Mg²⁺ -BP NP, reverting to Mg²⁺ -free monomer (switching "OFF"). This in situ reversible nanoswitching on and off of cell-adhesive Mg²⁺ presentation allows reversible cell adhesion and release in vivo, respectively, and spatiotemporally controls cyclic cell adhesion. In situ heterodimeric assembly of dual RGD ligand- and Mg²⁺ -active RGD-BP-Mg²⁺ NP (switching "Dual ON") further tunes and promotes focal adhesion, spreading, and differentiation of stem cells. The modular nature of this in situ nanoswitch can accommodate various bioactive nanostructures via metal-ion-ligand coordination to regulate diverse cellular functions in vivo in reversible and compatible manner.

Toward Light-Regulated Living Biomaterials

Living materials are an emergent material class, infused with the productive, adaptive, and regenerative properties of living organisms. Property regulation in living materials requires encoding responsive units in the living components to allow external manipulation of their function. Here, an optoregulated Escherichia coli (E. coli)-based living biomaterial that can be externally addressed using light to interact with mammalian cells is demonstrated. This is achieved by using a photoactivatable inducer of gene expression and bacterial surface display technology to present an integrin-specific miniprotein on the outer membrane of an endotoxin-free E. coli strain. Hydrogel surfaces functionalized with the bacteria can expose cell adhesive molecules upon in situ light-activation, and trigger cell adhesion. Surface immobilized bacteria are able to deliver a fluorescent protein to the mammalian cells with which they are interacting, indicating the potential of such a bacterial material to deliver molecules to cells in a targeted manner.

About Chemical Strategies to Fabricate Cell-Instructive Biointerfaces with Static and Dynamic Complexity

Properly functioning cell-instructive biointerfaces are critical for healthy integration of biomedical devices in the body and serve as decisive tools for the advancement of our understanding of fundamental cell biological phenomena. Studies are reviewed that use covalent chemistries to fabricate cell-instructive biointerfaces. These types of biointerfaces typically result in a static presentation of predefined cell-instructive cues. Chemically defined, but dynamic cell-instructive biointerfaces introduce spatiotemporal control over cell-instructive cues and present another type of biointerface, which promises a more biomimetic way to guide cell behavior. Therefore, strategies that offer control over the lateral sorting of ligands, the availability and molecular structure of bioactive ligands, and strategies that offer the ability to induce physical, chemical and mechanical changes in situ are reviewed. Specific attention is paid to state-of-the-art studies on dynamic, cell-instructive 3D materials. Future work is expected to further deepen our understanding of molecular and cellular biological processes investigating cell-type specific responses and the translational steps toward targeted in vivo applications.

Photoswitchable Layer-by-Layer Coatings Based on Photochromic Polynorbornenes Bearing Spiropyran Side Groups

Herein, we present the synthesis of linear photochromic norbornene polymers bearing spiropyran side groups (poly(SP-R)) and their assembly into layer-by-layer (LbL) films on glass substrates when converted to poly(MC-R) under UV irradiation. The LbL films were composed of bilayers of poly(allylamine hydrochloride) (PAH) and poly(MC-R), forming (PAH/poly(MC-R)) _n coatings. The merocyanine (MC) form presents a significant absorption band in the visible spectral region, which allowed tracking of the LbL deposition process by UV-vis spectroscopy, which showed a linear increase of the characteristic MC absorbance band with increasing number of bilayers. The thickness and morphology of the (PAH/poly(MC-R)) _n films were characterized by ellipsometry and scanning electron microscopy, respectively, with a height of ∼27.5 nm for the first bilayer and an overall height of ∼165 nm for the (PAH/poly(MC-R))₅ multilayer film. Prolonged white light irradiation (22 h) resulted in a gradual decrease of the MC band by 90.4 ± 2.9% relative to the baseline, indicating the potential application of these films as coatings for photocontrolled delivery systems.