A Perspective on Bio-Mediated Material Structuring

Mn and Co decorated biomorphic ceria fiber catalysts for soot and benzene total oxidation

Mn or Co supported CeO2 fiber catalysts were synthesized following a biotemplating route and evaluated in soot combustion and benzene total oxidation. The catalysts were characterized by SEM, EDX, N2 physisorption, FTIR-ATR, XRD, RAMAN and XPS. SEM results confirmed that the "twisted ribbon" morphology of the biotemplate was mostly maintained. XRD and Raman showed that Mn and Co cations partially insert into ceria lattice and also segregate at the surface of the fibers. XPS allowed to determine that both set of catalysts exhibit Ce3+ and Ce4+ species, in addition to adsorbed and lattice oxygen. Also, the average oxidation state (AOS) of surface Mn could be calculated. Compared to bare Fib Ce, the performances for both reactions were improved for the supported catalysts, except from the catalyst with lowest Mn content for soot combustion. The catalytic activity was discussed in terms of the physicochemical features of the supported catalysts.

Biomimetic Hydroxyapatite on 3D-Printed Nanoattapulgite/Polycaprolactone Scaffolds for Bone Regeneration of Rat Cranium Defects

Nanoattapulgite (nano-ATP), a magnesium-aluminum silicate clay, can absorb substances and is a suitable material for bone repair and regeneration. In this study, using three-dimensional printing technology, a nano-ATP/polycaprolactone (PCL) scaffold was fabricated and modified using NaOH to form a rough surface. Biomimetic hydroxyapatite (HA) on nano-ATP/PCL scaffolds was fabricated using a biomineralized approach. The scaffold provided structural support through PCL and was modified with ATP and HA to improve hydrophilicity and promote the delivery of nutrients. The biocompatibility and osteogenic induction of scaffolds were assessed in vitro using mouse bone marrow mesenchymal stem cells. According to the in vitro study results, the nano-ATP/PCL/HA composite scaffold significantly boosted the expression levels of genes related to osteogenesis (p < 0.05), attributed to its superior alkaline phosphatase activity and calcium deposition capabilities. The outcomes of in vivo experimentation demonstrated an augmentation in bone growth at the rat cranial defect site when treated with the ATP/PCL/HA composite scaffold. It can be inferred from the results that the implementation of ATP and HA for the bone tissue engineering repair material displays encouraging prospects.

Breeding Polyommatus icarus Serves as a Large-Scale and Environmentally Friendly Source of Precisely Tuned Photonic Nanoarchitectures

The colour of the butterfly wing serves as an important sexual and species-specific signal. Some species produce structural colouration by developing wing scales with photonic nanoarchitectures. These nanostructures are highly conservative, allowing only a ±10 nm peak wavelength deviation in the reflectance spectra of the blue structural colour in natural Common Blue (Polyommatus icarus) populations. They are promising templates of future artificial photonic materials and can be used in potential applications, too. In this work, we present methodology and infrastructure for breeding laboratory populations of Common Blue as a cost-effective and environmentally friendly source of nanostructures. Our technology enables the production of approximately 7500 wing samples, equivalent to 0.5-1 m2 of photonic nanoarchitecture surface within a year in a single custom-made insectarium. To ascertain the reliability of this method, we compared reflectance properties between different populations from distant geographic locations. We also provide genetic background of these populations using microsatellite genotyping. The laboratory population showed genetic erosion, but even after four generations of inbreeding, only minimal shifts in the structural colouration were observed, indicating that wild Common Blue populations may be a reliable source of raw material for photonic surfaces.

Investigating the Effect of Reflectance Tuning on Photocatalytic Dye Degradation with Biotemplated ZnO Photonic Nanoarchitectures Based on Morpho Butterfly Wings

Photonic nanoarchitectures of butterfly wings can serve as biotemplates to prepare semiconductor thin films of ZnO by atomic layer deposition. The resulting biotemplated ZnO nanoarchitecture preserves the structural and optical properties of the natural system, while it will also have the features of the functional material. The ZnO-coated wings can be used directly in heterogeneous photocatalysis to decompose pollutants dissolved in water upon visible light illumination. We used the photonic nanoarchitectures of different Morpho butterflies with different structural colors as biotemplates and examined the dependence of decomposition rates of methyl orange and rhodamine B dyes on the structural color of the biotemplates and the thickness of the ZnO coating. Using methyl orange, we measured a ten-fold increase in photodegradation rate when the 20 nm ZnO-coated wings were compared to similarly coated glass substrates. Using rhodamine B, a saturating relationship was found between the degradation rate and the thickness of the deposited ZnO on butterfly wings. We concluded that the enhancement of the catalytic efficiency can be attributed to the slow light effect due to a spectral overlap between the ZnO-coated Morpho butterfly wings reflectance with the absorption band of dyes, thus the photocatalytic performance could be changed by the tuning of the structural color of the butterfly biotemplates. The photodegradation mechanism of the dyes was investigated by liquid chromatography-mass spectroscopy.

Polycaprolactone/Gelatin/Hydroxyapatite Electrospun Nanomembrane Materials Incorporated with Different Proportions of Attapulgite Synergistically Promote Bone Formation

Purpose

To enhance the osteoinductive effect of Hydroxyapatite (HA) in bone tissue engineering, this study manufactured polycaprolactone (PCL)/gelatin (GEL)/HA nanofibrous scaffolds incorporated with different ratios of attapulgite (ATP): HA (0:3, 0:0, 1:1, 2:1 and 3:0) by high-voltage electrospinning. The synergistic effect exerted by ATP and HA on bone formation was explored both in vivo and in vitro.

Methods and Results

First, we determined the group composition and crystal structure of the nanosheets by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses. Then, the physical properties of the scaffolds, including the modulus of elasticity, porosity and water absorption were evaluated. Moreover, the surface microstructure of the nanofibrous scaffolds was captured by Scanning electron microscopy (SEM) and Transmission Electron Microscope (TEM). The biocompatibility of the fabricated scaffolds represented by cell counting kit 8 (CCK-8) and phalloidin staining was also assessed. Next, in vitro osteogenesis was evaluated. Real-time PCR, alkaline phosphatase (ALP) staining and Alizarin red S (ARS) staining results showed that the materials incorporated with HA and ATP at a ratio of 2:1 synergistically promoted more osteoblastic differentiation and extracellular mineralization than scaffolds doped with HA and ATP alone. Last, in vivo, Hematoxylin-Eosin staining (HE staining) and Masson staining showed that groups treated with HA and ATP acquired optimal patterns of bone regeneration.

Conclusion

This study clarified for the first time that the combination of HA and ATP orchestrated biomaterial-induced osseointegration, and the synergistic effect was more significant when the ratio of ATP/HA was 2:1. This conclusion also provides new ideas and a scientific basis for the development of functionalized nanomaterials in bone tissue engineering.

Engineered living bioassemblies for biomedical and functional material applications

Recent breakthroughs in biofabrication of bioasemblies, consisting of the engineered structures composed of biological or biosynthetic components into a single construct, have found a wide range of practical applications in medicine and engineering. This review presents an overview of how the bottom-up assembly of living entities could drive advances in medicine, by developing tunable biological models and more precise methods for quantifying biological events. Moreover, we delve into advances beyond biomedical applications, where bioassemblies can be manipulated as functional robots and construction materials. Finally, we address the potential challenges and opportunities in the field of engineering living bioassemblies, toward building new design principles for the next generation of bioengineering applications.

Bio-Templating: An Emerging Synthetic Technique for Catalysts. A Review

In the last few years, researchers have focused their attention on the synthesis of new catalyst structures based on or inspired by nature. Biotemplating involves the transfer of biological structures to inorganic materials through artificial mineralization processes. This approach offers the main advantage of allowing morphological control of the product, as a template with the desired morphology can be pre-determined, as long as it is found in nature. This way, natural evolution through millions of years can provide us with new synthetic pathways to develop some novel functional materials with advantageous properties, such as sophistication, miniaturization, hybridization, hierarchical organization, resistance, and adaptability to the required need. The field of application of these materials is very wide, covering nanomedicine, energy capture and storage, sensors, biocompatible materials, adsorbents, and catalysis. In the latter case, bio-inspired materials can be applied as catalysts requiring different types of active sites (i.e., redox, acidic, basic sites, or a combination of them) to a wide range of processes, including conventional thermal catalysis, photocatalysis, or electrocatalysis, among others. This review aims to cover current experimental studies in the field of biotemplating materials synthesis and their characterization, focusing on their application in heterogeneous catalysis.

Light-diffractive patterning of Porphyridium purpureum

Living structures: By projection of a light pattern from a computer-generated hologram, patterns of the algae Porphyridium purpureum were generated. The obtained pixelated pattern was evaluated and discussed in the context of the organism's phototaxis.

Bacteria-Assisted Synthesis of Nanosheet-Assembled TiO2 Hierarchical Architectures for Constructing TiO2-Based Composites for Photocatalytic and Electrocatalytic Applications

Synthesis and application of three-dimensional TiO₂ hierarchical architectures are one of the major priorities in the research and development of TiO₂ catalysts. Using bacteria as a template and a reactor, a bioinspired strategy was developed in the present study to synthesize nanosheet-assembled TiO₂ hierarchical architectures (N-TiO₂-HA) and relative composites for photocatalytic and electrocatalytic applications. In the first part of this work, three kinds of bacteria were used for the synthesis of N-TiO₂-HA with satisfactory monodispersity, and the growth mechanism was investigated. In the second part, porous TiO₂ hollow spheres (P-TiO₂-HS), which were obtained by calcining N-TiO₂-HA at 750 °C in air, were incorporated with MIL-101(Fe) to improve the visible-light photocatalytic efficiency. The results of the photo-Fenton-assisted degradation of rhodamine B and ciprofloxacin indicate that the synthesized composites have excellent visible-light photocatalytic activity. In the third part, the nanosheet-assembled TiO₂-carbon hollow spheres (N-TiO₂-C-HS), which were obtained by calcining N-TiO₂-HA at 750 °C in argon atmosphere, were electrodeposited with Pt for electrocatalytic oxidation of methanol. The electrochemical measurements show that Pt-deposited N-TiO₂-C-HS have better electrocatalytic activity, stability, and tolerance to CO poisoning than commercial Pt/C catalysts.

Bioinspired synthesis of SnO crosses as backbone in artificial sponges

The distinct electronic properties, including p-type semiconducting and a wide optical band gap, renders SnO suitable for applications such as microelectronic devices, gas sensors and electrodes. However, the synthesis of SnO is rather challenging due to the instability of the oxide, which is usually obtained as a by-product of SnO₂ fabrication. In this work, we developed a bioinspired synthesis, based on a hydrothermal approach, for the direct production of SnO nanoparticles. The amount of mineralizer, inducing the precipitation, was identified, which supports a template-free formation of the nanosized SnO particles at low temperature and mild chemical conditions. Moreover, the SnO nanoparticles exhibit a shape of unique three-dimensional crosses similar to the calcite crosses present in the calcareous sponges. We demonstrated that SnO crosses are evenly distributed and embedded in an organic scaffold by an ice-templating approach, in this way closely mimicking the structure of calcareous sponges. Such scaffolds, reinforced by an active material, here SnO, could be used as filters, sensors or electrodes, where a high surface area and good accessibility are essential. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology (part 2)'.