An Unfused-Core-Based Nonfullerene Acceptor Enables High-Efficiency Organic Solar Cells with Excellent Morphological Stability at High Temperatures

Understanding photochemical degradation mechanisms in photoactive layer materials for organic solar cells

Over the past decades, the field of organic solar cells (OSCs) has witnessed a significant evolution in materials chemistry, which has resulted in a remarkable enhancement of device performance, achieving efficiencies of over 19%. The photoactive layer materials in OSCs play a crucial role in light absorption, charge generation, transport and stability. To facilitate the scale-up of OSCs, it is imperative to address the photostability of these electron acceptor and donor materials, as their photochemical degradation process remains a challenge during the photo-to-electric conversion. In this review, we present an overview of the development of electron acceptor and donor materials, emphasizing the crucial aspects of their chemical stability behavior that are linked to the photostability of OSCs. Throughout each section, we highlight the photochemical degradation pathways for electron acceptor and donor materials, and their link to device degradation. We also discuss the existing interdisciplinary challenges and obstacles that impede the development of photostable materials. Finally, we offer insights into strategies aimed at enhancing photochemical stability and discuss future directions for developing photostable photo-active layers, facilitating the commercialization of OSCs.

Superior End-Group Stacking Promotes Simultaneous Multiple Charge-Transfer Mechanisms in Organic Solar Cells with an All-Fused-Ring Nonfullerene Acceptor

The all-fused-ring acceptor (AFRA) is a success for nonfullerene materials and has attracted considerable attention as its high optical and chemical stability expected to reduce energy loss, and power conversion efficiency (PCE) approaching 15% in constructed all-small-molecule organic solar cells (OSCs). Herein, the intrinsic role of the structure of AFRA F13 and the reason for its high PCE were revealed by comparison with those of typical fused acceptors IDT-IC and Y6. An increased degree of conjugation in F13 leads to broader and red-shifted absorption peaks, facilitating enhancement of the short-circuit current. Multiple charge-transfer mechanisms are mainly attributed to the higher Frenkel exciton (FE) state due to the multiple transition ways for acceptors in the C1-CN:F13 system. The increased number of atoms contributing to the charge-transfer (CT) state facilitated the existence of more superior stacking patterns with easy formation of CT and FE/CT states and a high charge separation rate. It was found using the AFRA is an effective strategy to enhance end-group stacking, enhancing the borrowing of oscillator strength to promote multiple CT mechanisms in the complexes, explaining the high performance of this OSC device. This work is promising to guide designing an efficient AFRA in the future.

Cyclization Engineering of Electron-Deficient Maleimide Unit for Nonfused Ring Electron Acceptors Enables Efficient Organic Solar Cells

Nonfused ring electron acceptors (NFREAs) have emerged as promising materials for commercial applications in organic solar cells due to their straightforward synthesis process and cost-effectiveness. The rational design of their structural frameworks is crucial for enhancing device efficiency. In this study, we explore the use of maleimide and thiophene as key building blocks, employing cyclization engineering techniques. Additionally, cyclopentanedithiophene was chosen as the bridging unit, coupled with fluorinated terminals, to fabricate NFREAs, namely, PI-DTS and DPI-DTS. DPI-DTS demonstrated superior molecular planarity and an upshifted lowest unoccupied molecular orbital energy level. Moreover, DPI-DTS-based blend films display enhanced π-π interactions and crystallinity, alongside a predominantly face-on orientation. Consequently, DPI-DTS-based devices displayed enhanced and more balanced carrier mobility, reduced bimolecular recombination, and trap-assisted recombination, leading to improved charge transfer efficiency. Ultimately, this led to an excellent efficiency of 10.48%, with an open-circuit voltage as high as 0.914 V. These findings highlight the significant promise of aromatic imides in constructing NFREAs, and the established structure-performance relationship provides a theoretical basis for the design of high performance NFREAs.

Polymer Fiber Rigid Network with High Glass Transition Temperature Reinforces Stability of Organic Photovoltaics

Organic photovoltaics (OPVs) need to overcome limitations such as insufficient thermal stability to be commercialized. The reported approaches to improve stability either rely on the development of new materials or on tailoring the donor/acceptor morphology, however, exhibiting limited applicability. Therefore, it is timely to develop an easy method to enhance thermal stability without having to develop new donor/acceptor materials or donor-acceptor compatibilizers, or by introducing another third component. Herein, a unique approach is presented, based on constructing a polymer fiber rigid network with a high glass transition temperature (Tg) to impede the movement of acceptor and donor molecules, to immobilize the active layer morphology, and thereby to improve thermal stability. A high-Tg one-dimensional aramid nanofiber (ANF) is utilized for network construction. Inverted OPVs with ANF network yield superior thermal stability compared to the ANF-free counterpart. The ANF network-incorporated active layer demonstrates significantly more stable morphology than the ANF-free counterpart, thereby leaving fundamental processes such as charge separation, transport, and collection, determining the device efficiency, largely unaltered. This strategy is also successfully applied to other photovoltaic systems. The strategy of incorporating a polymer fiber rigid network with high Tg offers a distinct perspective addressing the challenge of thermal instability with simplicity and universality.

Precisely Regulating Intermolecular Interactions and Molecular Packing of Nonfused-Ring Electron Acceptors via Halogen Transposition for High-Performance Organic Solar Cells

The structure of molecular aggregates is crucial for charge transport and photovoltaic performance in organic solar cells (OSCs). Herein, the intermolecular interactions and aggregated structures of nonfused-ring electron acceptors (NFREAs) are precisely regulated through a halogen transposition strategy, resulting in a noteworthy transformation from a 2D-layered structure to a 3D-interconnected packing network. Based on the 3D electron transport pathway, the binary and ternary devices deliver outstanding power conversion efficiencies (PCEs) of 17.46 % and 18.24 %, respectively, marking the highest value for NFREA-based OSCs.

Completely Non-Fused Low-Cost Acceptor Enables Organic Photovoltaic Cells with 17 % Efficiency

To meet the industrial requirements of organic photovoltaic (OPV) cells, it is imperative to accelerate the development of cost-effective materials. Thiophene-benzene-thiophene central unit-based acceptors possess the advantage of low synthetic cost, while their power conversion efficiency (PCE) is relatively low. Here, by incorporating a para-substituted benzene unit and 1st-position branched alkoxy chains with large steric hindrance, a completely non-fused non-fullerene acceptor, TBT-26, was designed and synthesized. The narrow band gap of 1.38 eV ensures the effective utilization of sunlight. The favorable phase separation morphology of TBT-26-based blend film facilitates the efficient exciton dissociation and charge transport in corresponding OPV cell. Therefore, the TBT-26-based small-area cell achieves an impressive PCE of 17.0 %, which is the highest value of completely non-fused OPV cells. Additionally, we successfully demonstrated the scalability of this design by fabricating a 28.8 cm2 module with a high PCE of 14.3 %. Overall, our work provides a practical molecular design strategy for developing high-performance and low-cost acceptors, paving the way for industrial applications of OPV technology.

Molecular Design of Fully Nonfused Acceptors for Efficient Organic Photovoltaic Cells

The nonfused thiophene-benzene-thiophene (TBT) unit offers advantages in obtaining low-cost organic photovoltaic (OPV) materials due to its simple structure. However, OPV cells, including TBT-based acceptors, exhibit significantly lower energy conversion efficiencies. Here, we introduce a novel approach involving the design and synthesis of three TBT-based acceptors by substituting different position-branched side chains on the TBT unit. In comparison to TBT-10 and TBT-11, TBT-13, which exclusively incorporates α-position branched side chains with a large steric hindrance, demonstrates a more planar and stable conformation. When blended with the donor PBQx-TF, TBT-13-based blend film achieves favorable π-π stacking and aggregation characteristics, resulting in excellent charge transfer performance in the corresponding device. Due to the simultaneous enhancements in short-circuit current density and fill factor, the TBT-13-based OPV cell obtains an outstanding efficiency of 16.1%, marking the highest value for the cells based on fully nonfused acceptors. Our work provides a practical molecular design strategy for high-performance and low-cost OPV materials.

Low-Cost Nonfused-Ring Electron Acceptors Enabled by Noncovalent Conformational Locks

ConspectusSince the first bilayer-structured organic solar cells (OSCs) in 1986, fullerenes and their derivatives have dominated the landscape for two decades due to their unique properties. In recent years, the breakthrough in nonfullerene acceptors (NFAs) was mainly attributed to the development of fused-ring electron acceptors (FREAs), whose photovoltaic performance surpassed that of fullerene derivatives. Through the unremitting efforts of the whole community, the power conversion efficiencies (PCEs) have surpassed 19% in FREA-based OSCs. However, FREAs generally suffered from complex synthetic approaches and high product costs, which hindered large-scale production. Therefore, many researchers are seeking a new type of NFA to achieve cost-effective, highly efficient OSCs.In collaboration with Marks and Facchetti in 2012, Huang et al. (Huang, H. J. Am. Chem. Soc. 2012, 134, 10966-10973, 10.1021/ja303401s) proposed the concept of "noncovalent conformational locks" (NoCLs). In the following years, our group has been focusing on the theoretical and experimental exploration of NoCLs, revealing their fundamental nature, formulating a simple descriptor for quantifying their strength, and employing this approach to achieve high-performance organic/polymeric semiconductors for optoelectronics, such as OSCs, thin-film transistors, room-temperature phosphorescence, and photodetectors. The NoCLs strategy has been proven to be a simple and effective approach for enhancing molecular rigidity and planarity, thus improving the charge transport mobilities of organic/polymeric semiconductors, attributed to reduced reorganization energy and suppressed nonradiative decay.In 2018, Chen et al. (Li, S. Adv. Mater. 2018, 30, 1705208, 10.1002/adma.201705208) reported the first example of nonfused-ring electron acceptors (NFREAs) with intramolecular noncovalent F···H interactions. The NoCLs strategy is essential in NFREAs, as it simplifies the conjugated structures while maintaining high coplanarity comparable to that of FREAs. Due to their simple structures and concise synthesis routes, NFREAs show great potential for achieving cost-effective and highly efficient OSCs. In this Account, we provide an overview of our efforts in developing NFREAs with the NoCLs strategy. We begin with a discussion on the distinct features of NFREAs compared with FREAs, and the structural simplification from FREAs to NFREAs to completely NFREAs. Next, we examine several selected typical examples of NFREAs with remarkable photovoltaic performance, aiming to provide an in-depth exploration of the molecular design principle and structure-property-performance relationships. Then, we discuss how to achieve a balance among efficiency, stability, and cost through a two-in-one strategy of polymerized NFREAs (PNFREAs). Finally, we offer our views on the current challenges and future prospects of NFREAs. We hope this Account will trigger intensive research interest in this field, thus propelling OSCs into a new stage.

Binary Organic Solar Cells with over 19 % Efficiency and Enhanced Morphology Stability Enabled by Asymmetric Acceptors

The simultaneous improvement of efficiency and stability of organic solar cells (OSCs) for commercialization remains a challenging task. Herein, we designed asymmetric acceptors DT-C8Cl and DT-C8BTz with functional haloalkyl chains, in which the halogen atoms could induce noncovalent interactions with heteroatoms like O, S, and Se, etc., thus leading to appropriately manipulated film morphology. Consequently, binary devices based on D18: DT-C8Cl achieved a champion power conversion efficiency (PCE) of 19.40 %. The higher PCE of D18: DT-C8Cl could be attributed to the enhanced π-π stacking, improved charge transport, and reduced recombination losses. In addition, the noncovalent interactions induced by haloalkyl chains could effectively suppress unfavorable morphology evolutions and thereby reduce trap density of states, leading to improved thermal and storage stability. Overall, our findings reveal that the rational design of asymmetric acceptors with functional haloalkyl chains is a novel and powerful strategy for simultaneously enhancing the efficiency and stability of OSCs.

Research Advances of Nonfused Ring Acceptors for Organic Solar Cells

The last few decades have witnessed the rapid development of organic solar cells (OSCs). High power conversion efficiencies (PCEs) of over 19% have been successfully achieved due to the emergence of fused-ring acceptors (FRAs). However, the high complexity and low yield for the material synthesis result in high production costs of FRAs, limiting the further commercial application of OSCs. In contrast, nonfused ring acceptors (NFRAs) with the merits of facile synthesis, high yield, and preferable stability can promote the development of low-cost OSCs. Currently, the PCEs of NFRAs-based OSCs have exceeded 17%, which is expected to reach efficiency comparable to that of the FRAs-based OSCs. This review describes the advantages of the recent advances in NFRAs, which emphasizes exploring how the chemical structures of NFRAs influence molecular conformation, aggregation, and packing modes. In addition, the further development of NFRA materials is prospected from molecular design, morphological control, and stability perspectives.

Precisely Manipulating Molecular Packing via Tuning Alkyl Side-Chain Topology Enabling High-Performance Nonfused-Ring Electron Acceptors

In the development of high-performance organic solar cells (OSCs), the self-organization of organic semiconductors plays a crucial role. This study focuses on the precisely manipulation of molecular assemble via tuning alkyl side-chain topology in a series of low-cost nonfused-ring electron acceptors (NFREAs). Among the three NFREAs investigated, DPA-4, which possesses an asymmetric alkyl side-chain length, exhibits a tight packing in the crystal and high crystallinity in the film, contributing to improved electron mobility and favorable film morphology for DPA-4. As a result, the OSC device based on DPA-4 achieves an excellent power conversion efficiency of 16.67 %, ranking among the highest efficiencies for NFREA-based OSCs.

Simple-Structured Acceptor with Highly Interconnected Electron-Transport Pathway Enables High-Efficiency Organic Solar Cells

Achieving desirable charge-transport highway is of vital importance for high-performance organic solar cells (OSCs). Here, it is shown how molecular packing arrangements can be regulated via tuning the alkyl-chain topology, thus resulting in a 3D network stacking and highly interconnected pathway for electron transport in a simple-structured nonfused-ring electron acceptor (NFREA) with branched alkyl side-chains. As a result, a record-breaking power conversion efficiency of 17.38% (certificated 16.59%) is achieved for NFREA-based devices, thus providing an opportunity for constructing low-cost and high-efficiency OSCs.

Noncovalent Interaction Boosts Performance and Stability of Organic Solar Cells Based on Giant-Molecule Acceptors

Designing giant-molecule acceptors is deemed as an up-and-coming strategy to construct stable organic solar cells (OSCs) with high performance. Herein, two giant dimeric acceptors, namely, DYV and DYFV, have been designed and synthesized by linking two Y-series derivatives with a vinyl unit. DYFV exhibits more red-shifted absorption, down-shifted energy levels, and enhanced intermolecular packing than DYV because the intramolecular noncovalent interaction (H···F) of DYFV leads to better coplanarity of the backbone. The D18:DYFV film owns a distinct nanofibrous nanophase separation structure, a more dominant face-on orientation, and more balanced carrier mobilities. Therefore, the D18:DYFV OSC achieves a higher photoelectron conversion efficiency of 17.88% and a longer-term stability with a t80 over 45,000 h compared with the D18:DYV device. The study demonstrates that the intramolecular noncovalent interaction is a superior strategy to design giant-molecule acceptors and boost the photovoltaic performance and stability of the OSCs.

An Ortho-Bisalkyloxylated Benzene-Based Fully Non-fused Electron Acceptor for Efficient Organic Photovoltaic Cells

To develop the low-cost nonfullerene acceptors (NFAs), two fully non-fused NFAs (TBT-2 and TBT-6) with ortho-bis((2-ethylhexyl)oxy)benzene unit and different side chains onto thiophene-bridges are synthesized through highly efficient synthetic procedures. Both acceptors show good planarity, low optical gaps (≈1.51 eV), and deep highest occupied molecular orbital levels (≤-5.77 eV). More importantly, the single-crystal structure of TBT-2 shows compact molecular arrangement due to the existence of intramolecular interactions between adjacent aromatic units and strong π-π stacking between intermolecular terminal groups. When the two acceptors are fabricated organic photovoltaic (OPV) cells by combining with a wide optical gap polymer donor, the TBT-6 with strong crystallization forms large domain sizes in bulk heterojunction (BHJ) blend. As a result, the TBT-6-based OPV cell shows a low power conversion efficiency (PCE) of 9.53%. In contrast, the TBT-2 with proper crystallization facilitates morphological optimization in the BHJ blend. Consequently, the TBT-2-based OPV cell gives an outstanding PCE of 13.25%, which is one of the best values among OPV cells with similar optical gaps. Overall, this work provides a practical molecular design strategy for developing high-performance and low-cost electron acceptors.

Approach toward Low Energy Loss in Symmetrical Nonfullerene Acceptor Molecules Inspired by Insertion of Different π-Spacers for Developing Efficient Organic Solar Cells

In this quantum approach, by adding bridge/π-spacer fragments between the donor and acceptor parts of a newly constructed DF-PCIC (A-D-A type) molecule, it is the aim to improve the photovoltaic characteristics of organic solar cells (OSCs). After π-spacer insertion into the reference molecule (DF-R), six new molecules (DF-M1 to DF-M6) were designed. The optoelectronic attributes of newly inspected molecules were theoretically calculated using MPW1PW91/6-31G(d,p) level of theory. All newly proposed molecules possessed a lower band gap (Eg), a higher value of absorption, lower reorganization energy, greater dipole moment, and lower energies of excitations than the DF-R molecule. The frontier molecular orbital study proclaimed that the DF-M1 molecule has the lowest band gap of 1.62 eV in comparison to the 2.41 eV value of DF-R. Absorption properties represented that DF-M1 and DF-M2 molecules show the highest absorption values of up to 1006 and 1004 nm, respectively, in the near-infrared region. Regarding the reorganization energy, DF-M2 has the lowest value of λe (0.0683896 eV) and the lowest value of λh (0.1566471 eV). DF-M2 and DF-M5 manifested greater dipole moments with the values of 5.514665 and 7.143434 D, respectively. The open circuit voltage (VOC) of all the acceptors was calculated with J61, a donor complex. DF-M4 and DF-M6 molecules showed higher values of VOC and fill factor than the DF-R molecule. Based on the given results, it was supposed that all the newly presented molecules might prove themselves to be better than the reference and thus might be of great interest to experimentalists. Thus, they are suggested to be used to develop proficient OSC devices with improved photovoltaic prospects in the near future.

Oligomerized Fused-Ring Electron Acceptors for Efficient and Stable Organic Solar Cells

Organic solar cells (OSCs) have attracted wide research attention in the past decades. Very recently, oligomerized fused-ring electron acceptors (OFREAs) have emerged as a promising alternative to small-molecular/polymeric acceptor-based OSCs due to their unique advantages such as well-defined structures, batch reproducibility, good film formation, low diffusion coefficient, and excellent stability. So far, rapid advances have been made in the development of OFREAs consisting of directly/rigidly/flexibly linked oligomers and fused ones. In this Minireview, we systematically summarized the recent research progress of OFREAs, including structural diversity, synthesis approach, molecular conformation and packing, and long-term stability. Finally, we conclude with future perspectives on the challenges to be addressed and potential research directions. We believe that this Minireview will encourage the development of novel OFREAs for OSC applications.

Tailoring the Weight of Surface and Intralayer Edge States to Control LUMO Energies

The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest-neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest-neighbor interactions. This method uses a Langmuir-Schaefer-type rolling transfer of Langmuir layers (rtLL) to minimize flow during the deposition of rigid Langmuir layers composed of π-conjugated molecules. Using UV-vis absorption spectroscopy, atomic force microscopy, and transmission electron microscopy, it is shown that the rtLL method advances the deposition of multi-Langmuir layers and enables the production of films with defined morphology. The variation in nearest-neighbor interactions is thus achieved and the resulting systematically tuned lowest unoccupied molecular orbital (LUMO) energies (determined via square-wave voltammetry) enable the establishment of a model that functionally relates the LUMO energies to a morphological descriptor, allowing for the prediction of the range of accessible LUMO energies.

High-Performance Nonfused Electron Acceptor with Precisely Controlled Side Chain Fluorination

Modification of the molecular packing of nonfullerene acceptors through fluorination represents one of the most promising strategies to achieve highly efficient organic solar cells (OSCs). In this work, three nonfused electron acceptors, namely, DTCBT-Fx (x = 0, 5, 9) with precisely controlled amounts of fluorine atoms in the side chains are designed and synthesized, and the effect of side chain fluorination is systematically studied. The results demonstrate that the light absorption, energy levels, molecular ordering, and film morphology could be effectively tuned by precisely controlling the side chain fluorination. DTCBT-F5 with an appropriate fluorine functionalization exhibits suitable miscibility with the donor polymer (PM6), leading to diminished charge recombination and improved charge carrier mobility. Consequently, a promising power conversion efficiency of 12.7% was obtained for DTCBT-F5-based solar cells, which outperforms those OSCs based on DTCBT-F0 (11.4%) and DTCBT-F9 (11.6%), respectively. This work demonstrates that precise control of the fluorine functionalization in side chains of nonfused electron acceptors is an effective strategy for realizing highly efficient OSCs.

Designing Electron-Deficient Diketone Unit Based Non-Fused Ring Acceptors with Amplified Optoelectronic Features for Highly Efficient Organic Solar Cells: A DFT Study

Organic solar cells (OSCs) made of electron-acceptor and electron-donor materials have significantly developed in the last decade, demonstrating their enormous potential in cutting-edge optoelectronic applications. Consequently, we designed seven novel non-fused ring electron acceptors (NFREAs) (BTIC-U1 to BTIC-U7) using synthesized electron-deficient diketone units and reported end-capped acceptors, a viable route for augmented optoelectronic properties. The DFT and TDDFT approaches were used to measure the power conversion efficiency (PCE), open circuit voltage (Voc), reorganization energies (λ_h, λ_e), fill factor (FF), light harvesting efficiency (LHE) and to evaluate the potential usage of proposed compounds in solar cell applications. The findings confirmed that the photovoltaic, photophysical, and electronic properties of the designed molecules BTIC-U1 to BTIC-U7 are superior to those of reference BTIC-R. The TDM analysis demonstrates a smooth flow of charge from the core to the acceptor groups. Charge transfer analysis of the BTIC-U1:PTB7-Th blend revealed orbital superposition and successful charge transfer from HOMO (PTB7-Th) to LUMO (BTIC-U1). The BTIC-U5 and BTIC-U7 outperformed the reference BTIC-R and other developed molecules in terms of PCE (23.29% and 21.18%), FF (0.901 and 0.894), normalized Voc (48.674 and 44.597), and Voc (1.261 eV and 1.155 eV). The proposed compounds enclose high electron and hole transfer mobilities, making them the ideal candidate for use with PTB7-Th film. As a result, future SM-OSC design should prioritize using these constructed molecules, which exhibit excellent optoelectronic properties, as superior scaffolds.

Enhancing the Photovoltaic Properties via Incorporation of Selenophene Units in Organic Chromophores with A2-π2-A1-π1-A2 Configuration: A DFT-Based Exploration

Currently, polymer organic solar cells (POSCs) are widely utilized due to their significant application, such as low-cost power conversion efficiencies (PCEs). Therefore, we designed a series of photovoltaic materials (D1, D2, D3, D5 and D7) by the incorporation of selenophene units (n = 1-7) as π₁-spacers by considering the importance of POSCs. Density functional theory (DFT) calculations were accomplished at MPW1PW91/6-311G (d, p) functional to explore the impact of additional selenophene units on the photovoltaic behavior of the above-mentioned compounds. A comparative analysis was conducted for designed compounds and reference compounds (D1). Reduction in energy gaps (∆E = 2.399 - 2.064 eV) with broader absorption wavelength (λ_max = 655.480 - 728.376 nm) in chloroform along with larger charge transference rate was studied with the addition of selenophene units as compared to D1. A significantly higher exciton dissociation rate was studied as lower values of binding energy (E_b = 0.508 - 0.362 eV) were noted in derivatives than in the reference (E_b = 0.526 eV). Moreover, transition density matrix (TDM) and density of state (DOS) data also supported the efficient charge transition origination from HOMOs to LUMOs. Open circuit voltage (V_oc) was also calculated for all the aforesaid compounds to check the efficiency, and significant results were seen (1.633-1.549 V). All the analyses supported our compounds as efficient POSCs materials with significant efficacy. These compounds might encourage the experimental researchers to synthesize them due to proficient photovoltaic materials.

Alteration of the central core of a DF-PCIC chromophore to boost the photovoltaic applications of non-fullerene acceptor based organic solar cells

Modifying the central core is a very efficient strategy to boost the performance of non-fullerene acceptors. Herein five non-fullerene acceptors (M1-M5) of A-D-D'-D-A type were designed by substituting the central acceptor core of the reference (A-D-A'-D-A type) with different strongly conjugated and electron donating cores (D') to enhance the photovoltaic attributes of OSCs. All the newly designed molecules were analyzed through quantum mechanical simulations to compute their optoelectronic, geometrical, and photovoltaic parameters and compare them to the reference. Theoretical simulations of all the structures were carried out through different functionals with a carefully selected 6-31G(d,p) basis set. Absorption spectra, charge mobility, dynamics of excitons, distribution pattern of electron density, reorganization energies, transition density matrices, natural transition orbitals and frontier molecular orbitals, respectively of the studied molecules were evaluated at this functional. Among the designed structures in various functionals, M5 showed the most improved optoelectronic properties, such as the lowest band gap (2.18 e V), highest maximum absorption (720 nm), and lowest binding energy (0.46 eV) in chloroform solvent. Although the highest photovoltaic aptitude as acceptors at the interface was perceived to be of M1, its highest band gap and lowest absorption maxima lowered its candidature as the best molecule. Thus, M5 with its lowest electron reorganization energy, highest light harvesting efficiency, and promising open-circuit voltage (better than the reference), amongst other favorable features, outperformed the others. Conclusively, each evaluated property commends the aptness of designed structures to augment the power conversion efficiency (PCE) in the field of optoelectronics in one way or another, which reveals that a central un-fused core having an electron-donating capability with terminal groups being significantly electron withdrawing, is an effective configuration for the attainment of promising optoelectronic parameters, and thus the proposed molecules could be utilized in future NFAs.

Quantum modeling of dimethoxyl-indaceno dithiophene based acceptors for the development of semiconducting acceptors with outstanding photovoltaic potential

In the current DFT study, seven dimethoxyl-indaceno dithiophene based semiconducting acceptor molecules (ID1-ID7) are designed computationally by modifying the parent molecule (IDR). Here, based on a DFT exploration at a carefully selected level of theory, we have compiled a list of the optoelectronic properties of ID1-ID7 and IDR. In light of these results, all newly designed molecules, except ID5 have shown a bathochromic shift in their highest absorbance (λ _max). ID1-ID4, ID6 and ID7 molecules have smaller band gap (E _gap) and excitation energy (E _x). IP of ID5 is the smallest and EA of ID1 is the largest among all others. Compared to the parent molecule, ID1-ID3 have increased electron mobility, with ID1 being the most improved in hole mobility. ID4 had the best light harvesting efficiency in this investigation, due to its strongest oscillator. The acceptor molecules' open-circuit voltages (V _OC) were computed after being linked to the PTB7-Th donor molecule. Fill factor (FF) and normalized V _OC of ID1-ID7 were calculated and compared to the parent molecule. Based on the outcomes of this study, the modified acceptors may be further scrutinised for empirical usage in the production of organic solar cells with enhanced photovoltaic capabilities.

Unsymmetrically Chlorinated Non-Fused Electron Acceptor Leads to High-Efficiency and Stable Organic Solar Cells

Searching the cost-effective organic semiconductors is strongly needed in order to facilitate the practice of organic solar cells (OSCs), yet to be fulfilled. Herein, we have succeeded in developing two non-fused ring electron acceptors (NFREAs), leading to the highest efficiency of 16.2 % for the NFREA derived OSCs. These OSCs exhibit the superior operational stabilities under one sun equivalent illumination without ultraviolet (UV) filtration. It is revealed that the modulation of halogen substituents on aromatic side chains, as the new structural tool to tune the intermolecular interaction and optoelectronic properties of acceptors, not only promotes the interlocked tic-tac-toe frame of three-dimensional stacks in solid, but also improves charge dynamics of acceptors to enable high-performance and stable OSCs.

Multiphase Morphology with Enhanced Carrier Lifetime via Quaternary Strategy Enables High-Efficiency, Thick-Film, and Large-Area Organic Photovoltaics

With the continuous breakthrough of the efficiency of organic photovoltaics (OPVs), their practical applications are on the agenda. However, the thickness tolerance and upscaling in recently reported high-efficiency devices remains challenging. In this work, the multiphase morphology and desired carrier behaviors are realized by utilizing a quaternary strategy. Notably, the exciton separation, carrier mobility, and carrier lifetime are enhanced significantly, the carrier recombination and the energy loss (E_loss ) are reduced, thus beneficial for a higher short-circuit density (J_SC ), fill factor (FF), and open-circuit voltage (V_OC ) of the quaternary system. Moreover, the intermixing-phase size is optimized, which is favorable for constructing the thick-film and large-area devices. Finally, the device with a 110 nm-thick active layer shows an outstanding power conversion efficiency (PCE) of 19.32% (certified 19.35%). Furthermore, the large-area (1.05 and 72.25 cm² ) devices with 110 nm thickness present PCEs of 18.25% and 12.20%, and the device with a 305 nm-thick film (0.0473 cm² ) delivers a PCE of 17.55%, which are among the highest values reported. The work demonstrates the potential of the quaternary strategy for large-area and thick-film OPVs and promotes the practical application of OPVs in the future.

Balancing the Selective Absorption and Photon-to-Electron Conversion for Semitransparent Organic Photovoltaics with 5.0% Light-Utilization Efficiency

Efficiently converting invisible light while allowing full visible light transmission is key to achieving high-performance semitransparent organic photovoltaics (ST-OPVs). Here, a detailed balance strategy is explored to optimize the ST-OPV via taking both absorption and carrier dynamics into consideration. Based on this principle, comprehensive optimizations are carried out, including a ternary strategy, donor:acceptor blend ratio, thickness, antireflection, etc., to compromise the invisible energy conversion and visible transmission for high-performance ST-OPVs. As a result, the opaque OPV device exhibits a champion power conversion efficiency of 19.35% (certificated 19.07%), and most strikingly, the best ST-OPV shows a remarkably high light-utilization efficiency of 5.0%, where the efficiency and the average visible transmission are 12.95% and 38.67%, respectively. An efficiency of 12.09% is achieved on the upscaled device with an area of 1.05 cm² , demonstrating its promise for large-area fabrication. These results are among the best values for ST-OPVs. Besides, it is demonstrated that the ST-OPV exhibits good infrared light-reflection capability for thermal control. This work provides a rational design of balancing the absorbing selectivity and photon-to-electron conversion for high-performance ST-OPVs, and may pave the way toward the practical application of solar windows.

Achieving and Understanding of Highly Efficient Ternary Organic Photovoltaics: From Morphology and Energy Loss to Working Mechanism

Ternary strategy, adding an additional donor (D) or acceptor (A) into conventional binary D:A blend, has shown great potential in improving photovoltaic performances of organic photovoltaics (OPVs) for practical applications. Herein, this review is presented on how efficient ternary OPVs are realized from the aspects of morphology, energy loss, and working mechanism. As to morphology, the role of third component on the formation of preferred alloy-like-phase and vertical-phase, which are driven by the miscibility tuning, is discussed. For energy loss, the effect of the third component on the luminescence enhancement and energetic disordering suppression, which lead to favorable increase of voltage, is presented. Regarding working mechanism, dilution effect and relationships between two acceptors or donor/acceptor, which explain the observed device parameters variations, are analyzed. Finally, some future directions concerning ternary OPVs are pointed out. Therefore, this review can provide a comprehensive understanding of working principles and effective routes for high-efficiency ternary systems, advancing the commercialization of OPVs.

Versatile Sequential Casting Processing for Highly Efficient and Stable Binary Organic Photovoltaics

Forming an ideal bulk heterojunction (BHJ) morphology is a critical issue governing the photon to electron process in organic solar cells (OSCs). Complementary to the widely-used blend casting (BC) method for BHJ construction, sequential casting (SC) can also enable similar or even better morphology and device performance for OSCs. Here, BC and SC methods on three representative donor:acceptor (D:A) blends are utilized, that is, PM6:PC₇₁ BM, PM6:IT-4F and PM6:L8-BO. Higher power conversion efficiencies (PCEs) in all cases by taking advantage of beneficial morphology from SC processing are achieved, and a champion PCE of 18.86% (certified as 18.44%) based on the PM6:L8-BO blend is reached, representing the record value among binary OSCs. The observations on phase separation and vertical distribution inspire the proposal of the swelling-intercalation phase-separation model to interpret the morphology evolution during SC processing. Further, the vertical phase segregation is found to deliver an improvement of device performance via affecting the charge transport and collection processes, as evidenced by the D:A-ratio-dependent photovoltaic properties. Besides, OSCs based on SC processing show advantages on device photostability and upscale fabrication. This work demonstrates the versatility and efficacy of the SC method for BHJ-based OSCs.

Benzotriazole-Based Non-Fused Ring Acceptors for Efficient and Thermally Stable Organic Solar Cells

Non-fused ring acceptors (NFRAs) have attracted significant attention for non-fullerene organic solar cells (OSCs) owing to their chemical tunability and facile synthesis. In this study, a benzotriazole-based NFRA with chlorinated end groups (Triazole-4Cl) is developed to realize highly efficient and thermally stable NFRA-based OSCs; an analogous NFRA with non-chlorinated end groups (Triazole-H) is synthesized for comparison. Triazole-4Cl film exhibits the high-order packing structure and the near-infrared absorption capability, which are advantageous in charge transport and light harvesting of the resulting OSCs. In particular, the strong crystalline behavior of Triazole-4Cl results in enhanced self-aggregation, leading to high charge carrier mobility. Owing to these properties, a PBDB-T(polymer donor):Triazole-4Cl OSC demonstrates a high short-circuit current, fill factor, and power conversion efficiency (PCE = 10.46%), outperforming a PBDB-T:Triazole-H OSC (PCE = 7.65%). In addition, the thermal stability of a PBDB-T:Triazole-4Cl OSC at an elevated temperature of 120°C exceeds that of a PBDB-T:Triazole-H OSC. This is mainly attributed to the significantly higher cold crystallization temperature of Triazole-4Cl (205.9°C). This work provides useful guidelines for the design of NFRAs to achieve efficient and thermally stable NFRA-based OSCs. This article is protected by copyright. All rights reserved.

High-Performance Organic Solar Modules via Bilayer-Merged-Annealing Assisted Blade Coating

Although encouraging progress is being made on spin-coated prototype cells, organic solar cells (OSCs) still face significant challenges, yet to be explored, for upscaling the multi-stacked photoactive layers in the construction of large-area modules. Herein, high-performance opaque and semitransparent organic solar modules are developed via a bilayer-merged-annealing (BMA)-assisted blade-coating strategy, achieving impressive efficiencies of 14.79% and 12.01% with respect to active area of 18.73 cm² , which represent the best organic solar minimodules so far. It is revealed that the BMA strategy effectively resolves the de-wetting issues between polar charge transport layer solution and non-polar bulk heterojunction blends, hence improving the film coverage, along with electronic and electric contacts of multi-stacked photoactive layers. As result, organic solar modules coated under ambient conditions successfully retain the high-efficiency of small-area cells upon 312 times area scaling-up. Overall, this work provides a facile and effective method to fabricate high-performance organic solar modules under ambient conditions.

Molecular-Shape-Controlled Nonfused Ring Electron Acceptors for High-Performance Organic Solar Cells with Tunable Phase Morphology

Two nonfused ring electron acceptors (NFREAs), BTh-OC8-2F and DTh-OC8-2F, with different molecular shapes are designed and synthesized. Both acceptors can form planar molecular shapes by the assistance of S···O intramolecular interactions. Differently, BTh-OC8-2F, with a linear molecular backbone and two trans-arranged side chains at the core unit, exhibits much stronger crystallinity than DTh-OC8-2, with a C-shape molecular shape and two cis-arranged steric side chains at the core unit. Thus, the DTh-OC8-2F based blend film displays a better nanoscale phase separation, more suppressed charge recombination, more efficient exciton dissociation, and lower nonradiative energy loss. Organic solar cells based on DTh-OC8-2F can deliver a power conversion efficiency of 14.13%, which is much higher than BTh-OC8-2F based ones (11.95%) and is also one of the highest values reported for organic solar cells based on NFREAs.

C-H Direct Arylation: A Robust Tool to Tailor the π-Conjugation Lengths of Non-Fullerene Acceptors

Facile synthesis without involvement of toxic reagents is of great significance in the practical application of photovoltaic materials. In this work, four acceptor-donor-acceptor (A-D-A) type unfused-ring acceptors (UFRAs) with stepwise extension in π-conjugation, i. e., CPFB-IC-n (n=1-4), involving cyclopentadithiophene (CPDT) and 1,4-difluorobenzene (DFB) as cores, are facilely synthesized by an atom-, step-economic and labor-saving method through direct arylation of C-H bond (DACH). Among them, CPFB-IC-4 has the longest conjugation lengths among the molecular UFRA ever reported. The dependence of optoelectronic properties and photovoltaic performances of CPFB-IC-n (n=1-4) on conjugation length were systematically investigated. CPFB-IC-2 with near zero highest occupied molecular orbital (HOMO) offsets (ΔE_HOMO =0.06 eV) achieves the highest power conversion efficiency (PCE), due to the significantly enhanced open voltage (V_OC ) and short current (J_SC ) caused by the balanced frontier molecular orbitals (FMOs) and complementary light absorption. Our work demonstrates that the optical properties and FMOs of UFRAs can be finely tuned by the stepwise elongation of conjugation lengths. Meanwhile, DACH coupling as a powerful tool here established will be a promising candidate for synthesizing high-performance oligomeric UFRAs.

Unfused Acceptors Matching π-Bridge Blocks with Proper Frameworks Enable Over 12% As-Cast Organic Solar Cells

Emerging unfused-ring acceptors (UFAs) have been explored in pursuit of low-cost high-efficient organic solar cells (OSCs). Assembling unfused building blocks into proper frameworks are challenging for the molecular design of UFAs. The authors report herein four UFAs adopting either dithiophene cyclopentadiene (DTC) or dithieno[3,2-b:2',3'-d]pyrrole (DTP) as π-bridge units with different molecular frameworks for high-efficient as-cast OSCs. All these acceptors exhibit strong near-infrared absorption and narrow optical band gap (E_g ^opt  < 1.50 eV). DTC-bridged symmetric and DTP-bridged asymmetric UFAs exhibit higher planar conformation as well as suitable miscibility and homogeneous phase separation when blending with polymer donor PBDB-T to promote efficient charge transport in the blends. Their blends with PBDB-T contribute optimal PCE of 12.17% and 11.92% in as-cast OSCs, among the highest values for UFAs based as-cast devices in the literature. Experimental and theoretical simulations systematically reveal the impact of manipulating the molecular framework of UFAs on their conformation, optoelectronic, and photovoltaic performance. The results indicate the matching π-bridge units with molecular frameworks as an attractive approach to design UFAs for high-performance as-cast OSCs.

High Sensitivity of Non-Fullerene Organic Solar Cells Morphology and Performance to a Processing Additive

Although solvent additives are used to optimize device performance in many novel non-fullerene acceptor (NFA) organic solar cells (OSCs), the effect of processing additives on OSC structures and functionalities can be difficult to predict. Here, two polymer-NFA OSCs with highly sensitive device performance and morphology to the most prevalent solvent additive chloronaphthalene (CN) are presented. Devices with 1% CN additive are found to nearly double device efficiencies to 10%. However, additive concentrations even slightly above optimum significantly hinder device performance due to formation of undesirable morphologies. A comprehensive analysis of device nanostructure shows that CN is critical to increasing crystallinity and optimizing phase separation up to the optimal concentration for suppressing charge recombination and maximizing performance. Here, domain purity and crystallinity are highly correlated with photocurrent and fill factors. However, this effect is in competition with uncontrolled crystallization of NFAs that occur at CN concentrations slightly above optimal. This study highlights how slight variations of solvent additives can impart detrimental effects to morphology and device performance of NFA OSCs. Therefore, successful scale-up processing of NFA-based OSCs will require extreme formulation control, a tuned NFA structure that resists runaway crystallization, or alternative methods such as additive-free fabrication.

Simultaneous Tuning of Alkyl Chains and End Groups in Non-fused Ring Electron Acceptors for Efficient and Stable Organic Solar Cells

Fine-tuning the alkyl chains and end groups of non-fused ring electron acceptors (NFREAs) plays vital roles in the promotion of charge transfer (CT) and power conversion efficiency (PCE). In this work, we developed a series of A-D-A'-D-A-type NFREAs, which possess the same terminals (A), the cyclopentadithiophene unit (D), and the thieno[3,4-c]pyrrole-4,6-dione (A'). Despite the subtle difference in side chains and halogenated end groups, the six acceptors exhibit a considerable difference in the efficiency and device stability of the organic solar cells (OSCs). Among the molecules, chlorinated NFREAs show a broader light absorption than the fluorinated ones do. Compared with C8C8-4F (1-octylnonyl and fluorination) and C6C4-4Cl (2-butyloctyl and chlorination), C8C8-4Cl (1-octylnonyl and chlorination) exhibits a lower highest occupied molecular orbital level, higher electron mobility, and denser molecular packing. The OSCs based on PM6:C8C8-4Cl yield the best PCE of 14.11%, which is attributed to the faster charge transport, high miscibility, and preferable morphology. Moreover, the PM6:C8C8-4Cl devices retain 91.1% of the initial PCE after being placed in air with 67% relative humidity for 50 days. This work shows that the simultaneous optimization of side chains and end groups facilitates the CT and improves the stability in the OSCs, offering a novel view into the molecular design of A-D-A'-D-A-type NFREAs.

Designing High-Performance Nonfused Ring Electron Acceptors via Synergistically Adjusting Side Chains and Electron-Withdrawing End-Groups

Three nonfused ring electron acceptors, Hexyl-0F, Isopropyl-0F, and Isopropyl-2F, are designed and synthesized. Unlike Hexyl-0F, Isopropyl-0F with two sterically hindered 2,4,6-triisopropyl-phenyl groups is highly soluble, which provides a good opportunity for solution processability. Compared with Isopropyl-0F, Isopropyl-2F with fluorinated end-groups exhibits red-shifted absorption. Due to these synergistic adjustment, Isopropyl-2F-based devices displayed a high power conversion efficiency of 12.55%, higher than that of Isopropyl-0F (9.49%). The result demonstrates that the introduction of large steric substituents in the π-bridge units and electron-withdrawing end-groups plays a positive role in the construction of high-efficiency nonfused ring electron acceptors.

Simultaneously Enhanced Efficiency and Mechanical Durability in Ternary Solar Cells Enabled by Low-Cost Incompletely Separated Fullerenes

All-polymer solar cells (all-PSCs) are one of the most promising application-oriented organic photovoltaic technologies due to their excellent operational and mechanical stability. However, the power conversion efficiencies (PCEs) are mostly lower than 16%, restricting their core competitiveness. Furthermore, the improvement of mechanical durability is rarely paid attention to cutting-edge all-PSCs. This work deploys a low-cost "technical grade" PCBM (incompletely separated but pure mixtures containing ≥90% [70]PCBM or [60]PCBM), into the efficient PM6:PY-IT all-polymer blend, successfully yielding a high-performance ternary device with 16.16% PCE, among the highest PCE values for all-PSCs. Meanwhile, an excellent mechanical property (i.e., crack onset strain = 11.1%) promoted from 9.5% for the ternary system is also demonstrated. The "technical grade" PCBM slightly disrupts the crystallization of polymers, and disperses well into the amorphous polymer regions of the all-PSC blends, thus facilitating charge transport and improving film ductility simultaneously. All these results confirm introducing low-cost "technical grade" PCBM with high electron mobility into all-polymer blends can improve carrier mobility, reduce charge recombination, and optimize morphology of the amorphous polymer regions, thus yielding more efficient and mechanically durable all-PSCs.

A New Noncovalently Fused-Ring Electron Acceptor Based on 3,7-Dialkyloxybenzo[1,2-b:4,5-b']dithiophene for Low-Cost and High-Performance Organic Solar Cells

The innovation of high-performance fused-ring electron acceptors (FREAs) has carried the field of organic solar cells (OSCs) towards a new stage of development. However, due to high synthetic complexity and production costs, FREAs may be not the most promising candidates for future commercialization applications. To address these disadvantages of FREAs, a series of low-cost acceptors, named as noncovalently fused-ring electron acceptors (NFREAs), has been successfully constructed by employing the strategy of noncovalently conformational locks (NoCLs). Herein, a novel NFREA (BDTO-4F) based on 3,7-dialkyloxybenzo[1,2-b:4,5-b']dithiophene is synthesized and fully characterized. Benefiting from the complementary absorption of the donor and acceptor, balanced charge transport, and favorable film morphology, J52:BDTO-4F based OSCs afforded a satisfied power conversion efficiency (PCE) of 12.09%, much higher than PBDB-T:BDTO-4F-based devices (8.30%). It is worth mentioning that BDTO-4F possesses a higher figure-of-merit (FOM) value of 55.65 in comparison with several representative FREAs based on a cost-efficiency evaluation. This work demonstrates the potential of the novel BDT derivative for constructing low-cost and high-performance NFREAs, providing a valuable insight on the materials design. This article is protected by copyright. All rights reserved.

Near-Infrared Materials: The Turning Point of Organic Photovoltaics

Near-infrared (NIR)-absorbing organic semiconductors have opened up many exciting opportunities for organic photovoltaic (OPV) research. For example, new chemistries and synthetical methodologies have been developed; especially, the breakthrough Y-series acceptors, originally invented by our group, specifically Y1, Y3, and Y6, have contributed immensely to boosting single-junction solar cell efficiency to around 19%; novel device architectures such as tandem and transparent organic photovoltaics have been realized. The concept of NIR donors/acceptors thus becomes a turning point in the OPV field. Here, the development of NIR-absorbing materials for OPVs is reviewed. According to the low-energy absorption window, here, NIR photovoltaic materials (p-type (polymers) and n-type (fullerene and nonfullerene)) are classified into four categories: 700-800 nm, 800-900 nm, 900-1000 nm, and greater than 1000 nm. Each subsection covers the design, synthesis, and utilization of various types of donor (D) and acceptor (A) units. The structure-property relationship between various kinds of D, A units and absorption window are constructed to satisfy requirements for different applications. Subsequently, a variety of applications realized by NIR materials, including transparent OPVs, tandem OPVs, photodetectors, are presented. Finally, challenges and future development of novel NIR materials for the next-generation organic photovoltaics and beyond are discussed.

Exploiting Novel Unfused-Ring Acceptor for Efficient Organic Solar Cells with Record Open-Circuit Voltage and Fill Factor

Unfused-ring acceptors (UFAs) show bright application prospects in organic solar cells (OSCs) thanks to their easy synthesis, low cost, and good device performance. The selection of central-core building block and suitable side chain are the key factors to achieve high-performance UFAs. Current tremendous endeavors for the development of UFAs mainly concentrate on obtaining higher short-circuit current density (J_sc ), albeit accompanied by low open-circuit voltage (V_oc ) and modest fill factor (FF). Herein, two novel A-D-A'-D-A type UFAs (BTCD-IC and BTCD-2FIC), which have the same new electron-withdrawing central-core dithieno[3',2':3,4;2'',3'':5,6]-benzo[1,2-c][1,2,5]thiadia-zole (DTBT) and cyclopentadithiophene unit (CPDT, substituted by 2-butyl-1-octyl alkyl chain) coupling with different terminals, were designed and synthesized. Two UFAs showed strong and broad light absorption in the wavelength range of 300-850 nm owing to the strong intramolecular charge transfer effect favorable by DTBT core. Compared with BTCD-IC, BTCD-2FIC with F-containing terminal group exhibited higher molar extinction coefficient, lower energy level, higher charge mobility, stronger crystallinity, more ordered molecular stacking, and better film morphology. As a result, when blended with donor polymer PBDB-T (poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene)-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']-dithiophene-4,8-dione)]), the BTCD-2FIC-based OSC achieved a superior power conversion efficiency (PCE) of 11.32 %, with a high V_oc of 0.85 V, a J_sc of 18.24 mA cm^-2 , and a FF of 73 %, than BTCD-IC-based OSC (PCE=8.96 %). Impressively, the simultaneously enhanced V_oc and FF values of the PBDB-T:BTCD-2FIC device were the highest values of the A-D-A'-D-A-type UFAs. The results demonstrate the application of electron-withdrawing DTBT central-core unit in efficient UFAs provides meaningful molecular design guidance for high-performance OSCs.

Influence of halogen elements on the optical properties of two-photon fluorescent dyes

The influence of three halogen elements F, Cl, Br on the fluorescent dyes were investigated by applying first principle calculations based on density functional method. We researched two aspects of absorption and emission and specifically analyzed the influence of halogen on the optical properties of molecules. First, the one-photon and two-photon absorption of these dyes were systematically investigated. Particularly, the two-photon absorption cross section were analysed. More important, the emission properties of these dyes were accurately researched by calculating wavelengths and fluorescence emission efficiencies. Furthermore, the fluorescence emission efficiencies of these molecules are accurately researched by calculating the radiative rate and the non-radiative decay rate. Our theoretical investigations reveal that the influence of halogen element on the optical properties of dyes, which achieved a more intuitive comparison of the luminous effects of these dye molecules.

Simple Tricyclic-Based A-π-D-π-A-Type Nonfullerene Acceptors for High-Efficiency Organic Solar Cells

Nonfused-ring electron acceptors have attracted much attention in recent years due to their advantages of simple synthetic routes, high yields, low costs, reasonable power conversion efficiencies (PCEs), and so on. Herein, three simple A-π-D-π-A-type acceptors (DTC-BO-4F, DTS-BO-4F, and DTP-BO-4F) comprising a tricyclic fused-ring core, two 2,5-bis(alkyloxy)phenylene spacers, and two difluorinated terminal groups (DF-IC) were developed. Compared with DTS-BO-4F, DTC-BO-4F and DTP-BO-4F exhibit higher molar extinction coefficients, stronger crystallinity, and more orderly stacking. The PBDB-T:DTC-BO-4F-based blend film shows suitable phase separation and higher and more balanced charge mobilities. Finally, the photovoltaic devices based on DTC-BO-4F give an outstanding PCE of 13.26% with a small nonradiative voltage loss of 0.23 eV.