Tailoring the Structure of Carbon Nanomaterials toward High-End Energy Applications

In-situ synthesis of heteroatom-doped hard carbon for sodium-ion batteries: Dual benefits for green energy and environment

Heteroatom-doped carbon has been widely investigated as anode materials for sodium-ion batteries (SIBs). However, simplifying the preparation process and precisely controlling their microstructure to achieve excellent Na+ storage performance remain significant challenges. Therefore, in this study, high-performance N, P co-doped Na+ storage carbon anode electrode materials were prepared by one-step carbonization using N, P-rich Eichhornia crassipes (EC) as raw materials and systematically tested for their Na+ storage performance. The doping levels of N and P atoms as well as the spatial structure of the carbon material were adjusted by changing the carbonization temperature during the pyrolysis process. Among them, the anode material corresponding to 1300 °C (EC-PN1300) showed an excellent Na+ storage capacity of 336 ± 4 mAh g-1 (50 mA g-1) and excellent cycling stability (99.8 % retention after 2000 cycles). In addition, the Na+ storage mechanism of EC-PN1300 was systematically analyzed using galvanostatic intermittent titration (GITT), ex-situ XPS and in-situ Raman spectroscopy, providing accurate research directions for developing carbon anode electrode materials with superior electrochemical performance. This study not only provides some insights into the preparation of carbon anode materials in alkali metal batteries and the development of carbon materials in other fields, but also realizes the interaction between environmental protection and new energy development.

Photodegradation of Microplastics through Nanomaterials: Insights into Photocatalysts Modification and Detailed Mechanisms

Microplastics (MPs) pose a profound environmental challenge, impacting ecosystems and human health through mechanisms such as bioaccumulation and ecosystem contamination. While traditional water treatment methods can partially remove microplastics, their limitations highlight the need for innovative green approaches like photodegradation to ensure more effective and sustainable removal. This review explores the potential of nanomaterial-enhanced photocatalysts in addressing this issue. Utilizing their unique properties like large surface area and tunable bandgap, nanomaterials significantly improve degradation efficiency. Different strategies for photocatalyst modification to improve photocatalytic performance are thoroughly summarized, with a particular emphasis on element doping and heterojunction construction. Furthermore, this review thoroughly summarizes the possible fundamental mechanisms driving the photodegradation of microplastics facilitated by nanomaterials, with a focus on processes like free radical formation and singlet oxygen oxidation. This review not only synthesizes critical findings from existing studies but also identifies gaps in the current research landscape, suggesting that further development of these photocatalytic techniques could lead to substantial advancements in environmental remediation practices. By delineating these novel approaches and their mechanisms, this work underscores the significant environmental implications and contributes to the ongoing development of sustainable solutions to mitigate microplastic pollution.

Design of Single-Atom Catalysts for E lectrocatalytic Nitrogen Fixation

The Electrochemical nitrogen reduction reaction (ENRR) can be used to solve environmental problems as well as energy shortage. However, ENRR still faces the problems of low NH3 yield and low selectivity. The NH3 yield and selectivity in ENRR are affected by multiple factors such as electrolytic cells, electrolytes, and catalysts, etc. Among these catalysts are at the core of ENRR research. Single-atom catalysts (SACs) with intrinsic activity have become an emerging technology for numerous energy regeneration, including ENRR. In particular, regulating the microenvironment of SACs (hydrogen evolution reaction inhibition, carrier engineering, metal-carrier interaction, etc.) can break through the limitation of intrinsic activity of SACs. Therefore, this Review first introduces the basic principles of NRR and outlines the key factors affecting ENRR. Then a comprehensive summary is given of the progress of SACs (precious metals, non-precious metals, non-metallic) and diatomic catalysts (DACs) in ENRR. The impact of SACs microenvironmental regulation on ENRR is highlighted. Finally, further research directions for SACs in ENRR are discussed.

Activating the room-temperature phosphorescence of carbon dots for the dual-signal detection of tetracycline and information encryption

Carbon dots (CDs) with room-temperature phosphorescence (RTP) attract the numerous explorations owing to their promising prospects in multiple fields, howbeit, their phosphorescence in aqueous barely lasts for long due to the quenching effects originated from the dissolved oxygen, and thus it is of a great challenge to acquire the water-soluble phosphorescent CDs. We here proposed one kind of solid-state RTP CDs through a microwave strategy using tetraethylenepentamine and phosphoric acid as the precursors. Significantly, we further employed tetraethoxysilane (TEOS) as the matrix, which could encapsulate the previous CDs, thus facilitating the formation of the compact structure and activating their long-lived and high-efficiency phosphorescence in aqueous. On the basis of their fluorescence and phosphorescence, a dual-signal strategy of detecting tetracycline by CDs@TEOS was successfully established, and this detection exhibited a fluorescent linear-range of 2 nM to 90 μM as well as a phosphorescent linear-range of 30 nM to 300 μM towards assaying tetracycline, broadening the dual-signal ways of assaying tetracycline. Additionally, the CDs prepared here showed the great potential of serving as the RTP ink for the information encryption.

Boosting the Performance of Low-Platinum Fuel Cells via a Hierarchical and Interconnected Porous Carbon Support

The design of a low-platinum (Pt) proton-exchange-membrane fuel cell (PEMFC) can reduce its high cost. However, the development of a low-Pt PEMFC is severely hindered by the high oxygen transfer resistance in the catalyst layer. Herein, a carbon with interconnected and hierarchical pores is synthesized as a support for the low-Pt catalyst to lower the oxygen transfer resistance. A H2-air fuel cell assembled by Pt/hierarchical porous carbon shows 1610 mW/cm2 peak power density, 2230 mA/cm2 current density at 0.60 V, and only 18.4 S/m local oxygen transfer resistance with 0.10 mgPt/cm2 Pt loading at the cathode, which far exceeds those of various carbon black supports and commercially used Pt/C catalysts. Both the experimental and simulation results have shown the advancement of hierarchical pores toward the high efficiency of oxygen transportation.

Fullerene Fragment Restructuring: How Spatial Proximity Shapes Defect-Rich Carbon Electrocatalysts

Fullerene transformation emerges as a powerful route to construct defect-rich carbon electrocatalysts, but the carbon bond breakage and reformation that determine the defect states remain poorly understood. Here, we explicitly reveal that the spatial proximity of disintegrated fullerene imposes a crucial impact on the bond reformation and electrocatalytic properties. A counterintuitive hard-template strategy is adopted to enable the space-tuned fullerene restructuring by calcining impregnated C60 not only before but also after the removal of rigid silica spheres (∼300 nm). When confined in the SiO2 nanovoids, the adjacent C60 fragments form sp3 bonding with adverse electron transfer and active site exposure. In contrast, the unrestricted fragments without SiO2 confinement reconnect at the edges to form sp2-hybridized nanosheets while retaining high-density intrinsic defects. The optimized catalyst exhibits robust alkaline oxygen reduction performance with a half-wave potential of 0.82 V via the 4e- pathway. Copper poisoning affirms the intrinsic defects as the authentic active sites. Density functional theory calculations further substantiate that pentagons in the basal plane lead to localized structural distortion and thus exhibit significantly reduced energy barriers for the first O2 dissociation step. Such space-regulated fullerene restructuring is also verified by heating C60 crystals confined in gallium liquid and a quartz tube.

Microwave-Assisted Synthesis as a Promising Tool for the Preparation of Materials Containing Defective Carbon Nanostructures: Implications on Properties and Applications

In this review, we focus on a small section of the literature that deals with the materials containing pristine defective carbon nanostructures (CNs) and those incorporated into the larger systems containing carbon atoms, heteroatoms, and inorganic components.. Briefly, we discuss only those topics that focus on structural defects related to introducing perturbation into the surface topology of the ideal lattice structure. The disorder in the crystal structure may vary in character, size, and location, which significantly modifies the physical and chemical properties of CNs or their hybrid combination. We focus mainly on the method using microwave (MW) irradiation, which is a powerful tool for synthesizing and modifying carbon-based solid materials due to its simplicity, the possibility of conducting the reaction in solvents and solid phases, and the presence of components of different chemical natures. Herein, we will emphasize the advantages of synthesis using MW-assisted heating and indicate the influence of the structure of the obtained materials on their physical and chemical properties. It is the first review paper that comprehensively summarizes research in the context of using MW-assisted heating to modify the structure of CNs, paying attention to its remarkable universality and simplicity. In the final part, we emphasize the role of MW-assisted heating in creating defects in CNs and the implications in designing their properties and applications. The presented review is a valuable source summarizing the achievements of scientists in this area of research.

Strategies for Sustainable Production of Hydrogen Peroxide via Oxygen Reduction Reaction: From Catalyst Design to Device Setup

An environmentally benign, sustainable, and cost-effective supply of H2O2 as a rapidly expanding consumption raw material is highly desired for chemical industries, medical treatment, and household disinfection. The electrocatalytic production route via electrochemical oxygen reduction reaction (ORR) offers a sustainable avenue for the on-site production of H2O2 from O2 and H2O. The most crucial and innovative part of such technology lies in the availability of suitable electrocatalysts that promote two-electron (2e-) ORR. In recent years, tremendous progress has been achieved in designing efficient, robust, and cost-effective catalyst materials, including noble metals and their alloys, metal-free carbon-based materials, single-atom catalysts, and molecular catalysts. Meanwhile, innovative cell designs have significantly advanced electrochemical applications at the industrial level. This review summarizes fundamental basics and recent advances in H2O2 production via 2e--ORR, including catalyst design, mechanistic explorations, theoretical computations, experimental evaluations, and electrochemical cell designs. Perspectives on addressing remaining challenges are also presented with an emphasis on the large-scale synthesis of H2O2 via the electrochemical route.

Construction of Nitrogen-Doped Biphasic Transition-Metal Sulfide Nanosheet Electrode for Energy-Efficient Hydrogen Production via Urea Electrolysis

Urea-assisted hybrid water splitting is a promising technology for hydrogen (H₂ ) production, but the lack of cost-effective electrocatalysts hinders its extensive application. Herein, it is reported that Nitrogen-doped Co₉ S₈ /Ni₃ S₂ hybrid nanosheet arrays on nickel foam (N-Co₉ S₈ /Ni₃ S₂ /NF) can act as an active and robust bifunctional catalyst for both urea oxidation reaction (UOR) and hydrogen evolution reaction (HER), which could drive an ultrahigh current density of 400 mA cm^-2 at a low working potential of 1.47 V versus RHE for UOR, and gives a low overpotential of 111 mV to reach 10 mA cm^-2 toward HER. Further, a hybrid water electrolysis cell utilizing the synthesized N-Co₉ S₈ /Ni₃ S₂ /NF electrode as both the cathode and anode displays a low cell voltage of 1.40 V to reach 10 mA cm^-2 , which can be powered by an AA battery with a nominal voltage of 1.5 V. The density functional theory (DFT) calculations decipher that N-doped heterointerfaces can synergistically optimize Gibbs free energy of hydrogen and urea, thus accelerating the catalytic kinetics of HER and UOR. This work significantly advances the development of the promising cobalt-nickel-based sulfide as a bifunctional electrocatalyst for energy-saving electrolytic H₂ production and urea-rich innocent wastewater treatment.

Role of the Support Effects in Single-Atom Catalysts

In recent years, single-atom catalysts (SACs) have received a significant amount of attention due to their high atomic utilization, low cost, high reaction activity, and selectivity for multiple catalytic reactions. Unfortunately, the high surface free energy of single atoms leads them easily migrated and aggregated. Therefore, support materials play an important role in the preparation and catalytic performance of SACs. Aiming at understanding the relationship between support materials and the catalytic performance of SACs, the support effects in SACs are introduced and reviewed herein. Moreover, special emphasis is placed on exploring the influence of the type and structure of supports on SAC catalytic performance through advanced characterization and theoretical research. Future research directions for support materials are also proposed, providing some insight into the design of SACs with high efficiency and high loading.

Adsorption properties of metal functionalized fullerene (C59Au, C59Hf, C59Ag, and C59Ir) nanoclusters for application as a biosensor for hydroxyurea (HXU): insight from theoretical computation

This theoretical study was conducted to evaluate the efficiency of fullerene C60 and its metal functionalized nano clusters (C59Au, C59Hf, C59Ag and C59Ir) as a sensor for hydroxyurea (HXU). The various conclusions concerning the adsorption and sensing properties of the studied nano surfaces were achieved using density functional theory (DFT) at the M062X-D3/gen/LanL2DZ/def2svp level of theory. Among the nano clusters studied for this interaction, analysis of the HOMO–LUMO energy differences (E g) showed that HXU@C59Hg (H2) reflects the least energy gap of 3.042 eV, indicating its greater reactivity, sensitivity and conductivity. Also, the adsorption phenomenon in this current study is best described as chemisorptions owing to the negative adsorption enthalpies observed. Thus, the adsorption energy (E Ad) follows an increasing pattern of: HXU@C60 (C1) (−0.218 eV) < HXU@C59Ir (I1) (−1.361 eV) < HXU@C59Au (A1) (−1.986 eV) < HXU@C59Hf (H1) (−2.640 eV) < HXU@C59Hg (H2) (−3.347 eV). Least E g, highest E Ad and non-covalent nature of interaction attributed to C59Hg surface are sufficient to show that, among all studied surfaces, C59Hg surface emerged as the most suitable adsorbent for the adsorption of HXU. Hence, it can be used in modeling future adsorbent material for hydroxyurea.

Electrocatalytic Oxygen Reduction to Produce Hydrogen Peroxide: Rational Design from Single-Atom Catalysts to Devices

Electrocatalytic production of hydrogen peroxide (H2O2) via the 2e- transfer route of the oxygen reduction reaction (ORR) offers a promising alternative to the energy-intensive anthraquinone process, which dominates current industrial-scale production of H2O2. The availability of cost-effective electrocatalysts exhibiting high activity, selectivity, and stability is imperative for the practical deployment of this process. Single-atom catalysts (SACs) featuring the characteristics of both homogeneous and heterogeneous catalysts are particularly well suited for H2O2 synthesis and thus, have been intensively investigated in the last few years. Herein, we present an in-depth review of the current trends for designing SACs for H2O2 production via the 2e- ORR route. We start from the electronic and geometric structures of SACs. Then, strategies for regulating these isolated metal sites and their coordination environments are presented in detail, since these fundamentally determine electrocatalytic performance. Subsequently, correlations between electronic structures and electrocatalytic performance of the materials are discussed. Furthermore, the factors that potentially impact the performance of SACs in H2O2 production are summarized. Finally, the challenges and opportunities for rational design of more targeted H2O2-producing SACs are highlighted. We hope this review will present the latest developments in this area and shed light on the design of advanced materials for electrochemical energy conversion.

Graphical abstract

Unraveling the Capacitive Charge Storage Mechanism of Nitrogen-Doped Porous Carbons by EQCM and ssNMR

Fundamental understanding of ion electroadsorption processes in porous electrodes on a molecular level provides important guidelines for next-generation energy storage devices like electric double layer capacitors (EDLCs). Porous carbons functionalized by heteroatoms show enhanced capacitive performance, but the underlying mechanism is still elusive, due to the lack of reliable tools to precisely identify multiple N species and establish clear structure property relations. Here, we use advanced analytical techniques such as low-temperature solid-state NMR (ssNMR) and electrochemical quartz crystal microbalance (EQCM) to relate the complex nitrogen functionalities to the charging mechanisms and capacitive performance. For the first time, it is demonstrated at a molecular level that N-doping strongly influences the electroadsorption mechanism in EDLCs. Without N-doping, anion (SO₄^2-) adsorption-desorption dominates the charging mechanism, whereas after doping, Li⁺ electroadsorption plays a key role. With the help of EQCM, it is demonstrated that SO₄^2- is strongly immobilized on the N-doped surface, leaving Li⁺ as the main charge carrier. The smaller size and higher concentration of Li⁺ compared to SO₄^2- benefit a higher capacitance. Amine/amide N is responsible for high capacitance, but surprisingly the pyridinic, pyrrolic, and graphitic N groups have no significant influence. 2D ¹H-¹⁵N NMR spectroscopy indicates that the conversion from pyridinium to pyrrolic N gives rise to a slightly decreased capacitance. This work not only demonstrates ssNMR as a powerful tool for surface chemistry characterization of electrode materials but also uncovers the related charging mechanism by EQCM, paving the way toward a comprehensive picture of EDLC chemistry.

An Expanded 2D Fused Aromatic Network with 90-Ring Hexagons

Two-dimensional fused aromatic networks (2D FANs) have emerged as a highly versatile alternative to holey graphene. The synthesis of 2D FANs with increasingly larger lattice dimensions will enable new application perspectives. However, the synthesis of larger analogues is mostly limited by lack of appropriate monomers and methods. Herein, we describe the synthesis, characterisation and properties of an expanded 2D FAN with 90-ring hexagons, which exceed the largest 2D FAN lattices reported to date.

A temperature-dependent phosphorus doping on Ti3C2Tx MXene for enhanced supercapacitance

A novel type of phosphorus doped Ti₃C₂T_x MXene nanosheets (P-Ti₃C₂T_x) is synthesized via a facile and controllable strategy of annealing MXene nanosheets with the presence of sodium hypophosphite. A combination of theoretical density functional theory calculation and experimental X-ray photoelectron spectroscopy discloses that the doped P atoms are prone to fill into Ti vacancies first due to their lowest formation free energy (ΔG_P* = -0.028 eV·Å^-2) and next to bond with surface terminals on MXene layers (ΔG_P* = 0.013 eV·Å^-2), forming P-C and P-O species, respectively. More importantly, the as-obtained P-Ti₃C₂T_x is, for the first time, investigated as the electrode material for supercapacitors, demonstrating a significantly boosted electrochemical performance by P doping. As a result, P-Ti₃C₂T_x electrode delivers a high specific capacitance of 320 F·g^-1 at a current density of 0.5 A·g^-1 (much higher than 131 F·g^-1 for undoped MXene), an ultrahigh rate retention of 83.8% capacitance at 30 A·g^-1, and a high cycling stability over continuous 5000 cycles.

Single-Atom Catalysts: A Review of Synthesis Strategies and Their Potential for Biofuel Production

Biofuels have been derived from various feedstocks by using thermochemical or biochemical procedures. In order to synthesise liquid and gas biofuel efficiently, single-atom catalysts (SACs) and single-atom alloys (SAAs) have been used in the reaction to promote it. SACs are made up of single metal atoms that are anchored or confined to a suitable support to keep them stable, while SAAs are materials generated by bi- and multi-metallic complexes, where one of these metals is atomically distributed in such a material. The structure of SACs and SAAs influences their catalytic performance. The challenge to practically using SACs in biofuel production is to design SACs and SAAs that are stable and able to operate efficiently during reaction. Hence, the present study reviews the system and configuration of SACs and SAAs, stabilisation strategies such as mutual metal support interaction and geometric coordination, and the synthesis strategies. This paper aims to provide useful and informative knowledge about the current synthesis strategies of SACs and SAAs for future development in the field of biofuel production.

Enhanced metal-support interaction between Pd and hierarchical Nb2O5via oxygen defect induction to promote CO oxidative coupling to dimethyl oxalate

Production of ethylene glycol from coal is a particularly interesting route as it is an economic alternative to the petrochemical-based route. In this process, effectively generating dimethyl oxalate (DMO) is a crucial step by CO oxidative coupling reaction under Pd-based catalysts. However, the aggregation of Pd species over the support is still an issue that relates to the deterioration of catalytic activity and stability. To this end, enhancing the metal-support interaction is urgently required. In this work, hierarchical Nb₂O₅ (H-Nb₂O₅) microspheres with abundant oxygen defects were synthesized to anchor the Pd species thus promoting the electron transfer between Pd species and Nb species associated with the generation of interfacial Pd-NbO_x sites. Besides, the thinned electron density of Pd species resulting from the electron-withdrawing effect of Nb species is beneficial for activating the adsorbed CO molecules, leading to superior catalytic activity. The Pd/H-Nb₂O₅ catalyst exhibited 63.1% of CO conversion (theoretical maximum conversion: 64.3%) and 92.9% of DMO selectivity, with a DMO weight time yield of 1297.9 g kg_cat.^-1 h^-1, and remained robust even after 50 h of time on stream evaluation. Current work provides a deep insight into the CO activation mechanism and helps improve the catalytic stability by boosting interfacial electron interaction via oxygen defects induction, and also sheds light on the design and synthesis of high-performance catalysts in other heterogeneous catalysis fields.

Probing Active Sites in CuxPdy Cluster Catalysts by Machine-Learning-Assisted X-ray Absorption Spectroscopy

Size-selected clusters are important model catalysts because of their narrow size and compositional distributions, as well as enhanced activity and selectivity in many reactions. Still, their structure-activity relationships are, in general, elusive. The main reason is the difficulty in identifying and quantitatively characterizing the catalytic active site in the clusters when it is confined within subnanometric dimensions and under the continuous structural changes the clusters can undergo in reaction conditions. Using machine learning approaches for analysis of the operando X-ray absorption near-edge structure spectra, we obtained accurate speciation of the Cu_xPd_y cluster types during the propane oxidation reaction and the structural information about each type. As a result, we elucidated the information about active species and relative roles of Cu and Pd in the clusters.

Edge-Rich Reduced Graphene Oxide Embedded in Silica-Based Laminated Ceramic Composites for Efficient and Robust Electrocatalytic Hydrogen Evolution

To mitigate the energy crisis and environmental pollution, efficient and earth-abundant hydrogen evolution reaction (HER) electrocatalysts are essential for hydrogen production through electrochemical water splitting. Graphene-based materials as metal-free catalysts have attracted significant attention but suffer from insufficient activity and stability. Therefore, a novel and economical approach is developed to prepare highly active, robust, and self-supported reduced graphene oxide (rGO)/SiO₂ ceramic composites as electrocatalysts in HER. Through intercalation and pressure sintering, the rGO sheets are parallelly aligned and embedded into a dense and chemically inert SiO₂ matrix, ensuring the electrical conductivity and stability of the prepared composites. After directional cutting, the edges of the oriented rGO sheets become fully exposed on the composite surface, acting as highly electrocatalytic active sites in HER, as confirmed by density functional theory calculations. The 4 vol% rGO/SiO₂ composite displays superior electrocatalytic performance, featuring a low overpotential (134 mV) at a current density of 10 mA cm^-2 , a small Tafel slope (103 mV dec^-1 ), and excellent catalytic durability in 0.5 m H₂ SO₄ . This study provides a new yet cost-effective strategy to prepare metal-free, robust, and edge-rich rGO/ceramic composites as a highly electrocatalytic active catalyst for HER applications.

Boosting Interfacial Electron Transfer between Pd and ZnTi-LDH via Defect Induction for Enhanced Metal-Support Interaction in CO Direct Esterification Reaction

Strong metal-support interaction is crucial to the stability of catalysts in heterogeneous catalysis. However, reports on boosting interfacial electron transfer between metal and support via defect induction for enhanced metal-support interaction are limited. In this work, ultrathin reducible ZnTi-layered double hydroxide (LDH) nanosheets with rich oxygen defects were synthesized to stabilize Pd clusters, and the rich oxygen defects promoted Pd cluster bonding with Zn and Ti atoms in supports, thereby forming a metal-metal bond. Electron spin resonance (ESR), X-ray absorption fine spectra (XAFS), and density functional theory (DFT) calculations demonstrate remarkable interfacial electron transfer (0.62 e). The Pd/ZnTi-LDH catalyst shows superior catalytic stability for CO direct esterification to dimethyl oxalate. By contrast, the nonreducible Pd/ZnAl-LDH catalyst with a few oxygen defects shows minimal interfacial electron transfer (0.08 e), which leads to relatively poor catalytic stability. This work provides a deep insight into promoting the stability of catalysts by boosting interfacial electron transfer via defect induction.

Kinetics control over the Schiff base formation reaction for fabrication of hierarchical porous carbon materials with tunable morphology for high-performance supercapacitors

Schiff base formation reaction is highly dynamic, and the microstructure of Schiff base polymers is greatly affected by reaction kinetics. Herein, a series of Schiff base cross-linked polymers (SPs) with different morphologies are synthesized through adjusting the species and amount of catalysts. Nitrogen/oxygen co-doped hierarchical porous carbon nanoparticles (HPCNs), with tunable morphology, specific surface area (SSA) and porosity, are obtained after one-step carbonization. The optimal sample (HPCN-3) possesses a coral reef-like microstructure, high SSA up to 1003 m²g^-1, and a hierarchical porous structure, exhibiting a remarkable specific capacitance of 359.5 F g^-1(at 0.5 A g^-1), outstanding rate capability and cycle stability in a 1 M H₂SO₄electrolyte. Additionally, the normalized electric double layer capacitance (EDLC) and faradaic capacitance of HPCN-3 are 0.239 F m^-2and 10.24 F g^-1respectively, certifying its superior electrochemical performance deriving from coral reef-like structure, high external surface area and efficient utilization of heteroatoms. The semi-solid-state symmetrical supercapacitor based on HPCN-3 delivers a capacitance of 55 F g^-1at 0.5 A g^-1, good cycle stability of 86.7% after 5000 GCD cycles at 10 A g^-1, and the energy density ranges from 7.64 to 4.86 Wh kg^-1.

Regulating the Electronic Structure and Active Sites in Ni Nanoparticles by Coating N-Doped C Layer and Porous Structure for an Efficient Overall Water Splitting

Developing efficient and robust bifunctional electrocatalysts are in high demand for the production of hydrogen by water splitting. Engineering an electrocatalyst with a regulated electronic structure and abundant active sites is an effective way to enhance the electrocatalytic activity. Herein, N-doped C-encapsulated Ni nanoparticles (Ni@N-C) are synthesized through a traditional hydrothermal reaction, followed by pyrolyzing under an Ar/H₂ atmosphere. The electrochemical measurements and density functional theory (DFT) calculations reveal that the electron transfer between the Ni core and the N-C shell induces the electron density redistribution on Ni@N-C, which directly promotes the adsorption and desorption of H* on the N-doped carbon (N-C) layer and thus dramatically enhances hydrogen production. Taking advantage of the porous spherical structure and the synergistic effects between Ni and N-doped carbon (N-C) layer, we obtain a Ni@N-C electrocatalyst that exhibits remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity with low overpotentials of 117 and 325 mV, respectively. Impressively, the assembled cell using Ni@N-C as both anode and cathode exhibits excellent activity as well as stable cyclability for over 12 h.

Flexible temperature sensors based on carbon nanomaterials

Flexible temperature sensors based on carbon nanomaterials can be attached to the surface of human skin or curved surfaces directly for continuous and stable data measurements, and have attracted extensive attention in myriad areas.

Mesoporous Nanoarchitectures for Electrochemical Energy Conversion and Storage

Mesoporous materials have attracted considerable attention because of their distinctive properties, including high surface areas, large pore sizes, tunable pore structures, controllable chemical compositions, and abundant forms of composite materials. During the last decade, there has been increasing research interest in constructing advanced mesoporous nanomaterials possessing short and open channels with efficient mass diffusion capability and rich accessible active sites for electrochemical energy conversion and storage. Here, the synthesis, structures, and energy-related applications of mesoporous nanomaterials are the main focus. After a brief summary of synthetic methods of mesoporous nanostructures, the delicate design and construction of mesoporous nanomaterials are described in detail through precise tailoring of the particle sizes, pore sizes, and nanostructures. Afterward, their applications as electrode materials for lithium-ion batteries, supercapacitors, water-splitting electrolyzers, and fuel cells are discussed. Finally, the possible development directions and challenges of mesoporous nanomaterials for electrochemical energy conversion and storage are proposed.

3D Carbon Frameworks for Ultrafast Charge/Discharge Rate Supercapacitors with High Energy-Power Density

Carbon-based electric double layer capacitors (EDLCs) hold tremendous potentials due to their high-power performance and excellent cycle stability. However, the practical use of EDLCs is limited by the low energy density in aqueous electrolyte and sluggish diffusion kinetics in organic or/and ionic liquids electrolyte. Herein, 3D carbon frameworks (3DCFs) constructed by interconnected nanocages (10-20 nm) with an ultrathin wall of ca. 2 nm have been fabricated, which possess high specific surface area, hierarchical porosity and good conductive network. After deoxidization, the deoxidized 3DCF (3DCF-DO) exhibits a record low IR drop of 0.064 V at 100 A g^-1 and ultrafast charge/discharge rate up to 10 V s^-1. The related device can be charged up to 77.4% of its maximum capacitance in 0.65 s at 100 A g^-1 in 6 M KOH. It has been found that the 3DCF-DO has a great affinity to EMIMBF₄, resulting in a high specific capacitance of 174 F g^-1 at 1 A g^-1, and a high energy density of 34 Wh kg^-1 at an ultrahigh power density of 150 kW kg^-1 at 4 V after a fast charge in 1.11 s. This work provides a facile fabrication of novel 3D carbon frameworks for supercapacitors with ultrafast charge/discharge rate and high energy-power density.

Confinement of single polyoxometalate clusters in molecular-scale cages for improved flexible solid-state supercapacitors

Herein, we realized the supramolecular confinement of a single polyoxometalate (POM) cluster precisely in a polypyrrole (PPy) hydrogel-wrapped CNT framework with molecular-scale cages. This hybrid hydrogel framework demonstrated an ultra-high loading (67.5 wt%) and extremely uniform dispersion of individual of H₃[P(Mo₃O₁₀)₄] (PMo₁₂) molecules, as demonstrated by sub-ångström-resolution HAADF-STEM. Consequently, it exhibited a better supercapacitor performance than that of the conventional composite system. The flexible solid-state supercapacitor exhibited a high energy density of 67.5 μW h cm^-2 at a power density of 700 μW cm^-2 and delivered a high capacitance retention of 85.7% after 3000 cycles. Moreover, the flexible device exhibited excellent mechanical stability. Density functional theory calculations revealed that the wrapped "fishnet-like" hydrogel creates a cage structure with a size of 1.8 nm for the precise storage of the PMo₁₂ molecule (diameter = 1.05 nm), leading to the mono-dispersion of single PMo₁₂ molecules on the hybrid hydrogel. The "caging" effect also activates the PMo₁₂ molecule to enhance its charging/discharging performance by introducing new reactive sites for proton transfer. We believe that this design for suitable cage structures can be used for the construction of other POM-based hybrid hydrogels, thereby achieving mono-dispersity and performance enhancement.

Bottom-up preparation of hierarchically porous MOF-modified carbon sphere derivatives for efficient oxygen reduction

The rational design and controllable preparation of carbon-based catalysts for oxygen reduction reactions (ORRs) are at the core of key technologies for fuel cells and chargeable batteries in the field of advanced energy conversion and storage. In the present study, a Co species was synthesized by tuning the Zn dopant content in a bimetallic zeolitic-imidazolate framework functionalized with carbon spheres (CoZn-ZIF/CS). Using CoZn-ZIF/CS as the precursor, Co nanoparticles on N-doped carbon spheres were generated at 1000 °C (CoZn-ZIF/CS-1000). These systems were bottom-up synthesized and extensiv ely investigated for their ORR performance. The Brunauer-Emmett-Teller surface area and total pore volume with values of 586 m2 g-1 and 0.39 cm3 g-1, respectively, for the CoZn-ZIF/CS-1000 are appropriate compared to those of the porous ZIF precursor. As expected, it exhibited high-activity ORR performance in an alkaline medium with a half-wave potential of 0.82 V vs. RHE and the diffusion-limited current density is 5.11 mV cm-2. Meanwhile, the obtained CoZn-ZIF/CS-1000 electrocatalyst shows better electrochemical stability and methanol tolerance than the commercial Pt/C. Therefore, our discovery opens up a new way to regulate the catalytic performance of carbon material templates and MOF derivatives, which could be further applied in the development of highly active catalysts for applications in chemical energy utilization.

Defect Rich Hierarchical Porous Carbon for High Power Supercapacitors

Tuning hierarchical pore structure of carbon materials is an effective way to achieve high energy density under high power density of carbon-based supercapacitors. However, at present, most of methods for regulating pores of carbon materials are too complicated to be achieved. In this work, a durian shell derived porous carbon (DSPC) with abundant porous is prepared through chemical activation as a defect strategy. Hierarchical porous structure can largely enhance the transfer rate of electron/ion. Furthermore, DSPC with multiple porous structure exhibits excellent properties when utilized as electrode materials for electric double layer capacitors (EDLCs), delivering a specific capacitance of 321 F g-1 at 0.5 A g-1 in aqueous electrolyte. Remarkably, a high energy density of 27.7 Wh kg-1 is obtained at 675 W kg-1 in an organic two-electrode device. And large capacity can be remained even at high charge/discharge rate. Significantly, hierarchical porous structure allows efficient ion diffusion and charge transfer, resulting in a prominent cycling stability. This work is looking forward to providing a promising strategy to prepare hierarchical porous carbon-based materials for supercapacitors with ultrafast electron/ion transport.

Designing ionic channels in novel carbons for electrochemical energy storage

Tremendous efforts have been dedicated to developing high-performance energy storage devices based on the micro- or nano-manipulation of novel carbon electrodes, as certain nanocarbons are perceived to have advantages such as high specific surface areas, superior electric conductivities, excellent mechanical properties and so on. In typical electrochemical electrodes, ions are intercalated/deintercalated into/from the bulk (for batteries) or adsorbed/desorbed on/from the surface (for electrochemical capacitors). Fast ionic transport, significantly determined by ionic channels in active electrodes or supporting materials, is a prerequisite for the efficient energy storage with carbons. In this report, we summarize recent design strategies for ionic channels in novel carbons and give comments on the promising features based on those carbons towards tailorable ionic channels.

Charge Storage Mechanisms of Single-Layer Graphene in Ionic Liquid

Graphene-based carbon materials are promising candidates for electrical double-layer (EDL) capacitors, and there is considerable interest in understanding the structure and properties of the graphene/electrolyte interface. Here, electrochemical impedance spectroscopy (EIS) and electrochemical quartz crystal microbalance (EQCM) are used to characterize the ion fluxes and adsorption on single-layer graphene in neat ionic liquid (EMI-TFSI) electrolyte. It is found that a positively charged ion-species desorption and ion reorganization dominate the double-layer charging during positive and negative polarizations, respectively, leading to the increase in EDL capacitance with applied potential.

Facile and Scalable Fabrication of Nitrogen-Doped Porous Carbon Nanosheets for Capacitive Energy Storage with Ultrahigh Energy Density

Porous carbon materials are the most commonly used electrode materials for supercapacitors because of their abundant structures, excellent conductivities, and chemical stability. However, the manufacture of carbon materials possessing sizable pores and remarkable wettability with the electrolyte remains challenging. Herein, we developed a facile and industrially scalable method for the production of nitrogen-doped porous carbon nanosheets (PNDC-4) with excellent pore size distribution, large specific surface area (>1200 m² g^-1), high conductivity (>700 S m^-1), and superb wettability either in aqueous or organic electrolyte. Particularly, PNDC-4 shows a high capacitance of 387 F g^-1 (1 A g^-1) in a three-electrode system with 3 M KOH and 80 F g^-1 (1 A g^-1) in a symmetric two-electrode system with EMIMBF₄. The device exhibits an ultrahigh energy density of 81 W h kg^-1 at a power density of 1.3 kW kg^-1 and can still maintain at 60.8 W h kg^-1 when the power density is increased to 266.6 kW kg^-1. Moreover, the devices show superb stability that 94% of its initial capacitance is still maintained after 100 000 cycles at 20 A g^-1.

One-step preparation of N,O co-doped 3D hierarchically porous carbon derived from soybean dregs for high-performance supercapacitors

Hierarchically porous carbon (HPC) material based on environmental friendliness biomass has spurred much attention, due to its high surface area and porous structure. Herein, three-dimensional (3D) N,O co-doped HPC (N-O-HPC) was prepared by using a one-step fabrication process of simultaneously carbonizing and activating soybean dregs and used as an electrode for supercapacitors (SCs). The obtained N-O-HPC with 4.8 at% N and 6.1 at% O exhibits a pretty small charge transfer resistance (0.05 Ω) and a large specific capacitance (408 F g-1 at 1 A g-1), due to its 3D hierarchically porous framework structure with extremely large specific surface area (1688 m2 g-1). Moreover, a symmetrical SC assembled with the HPC electrode exhibits an amazingly high energy density (22 W h kg-1 at 450 W kg-1) and a stable long cycling life with only 6% capacitance loss after 5000 cycles in 1 M Na2SO4 solution. This work provides a facile, green, and low-cost way to prepare electrode materials for SCs.

Room-Temperature Fabrication of a Nickel-Functionalized Copper Metal⁻Organic Framework (Ni@Cu-MOF) as a New Pseudocapacitive Material for Asymmetric Supercapacitors

A nickel-functionalized copper metal-organic framework (Ni@Cu-MOF) was prepared by a facile volatilization method and a post-modification synthesis method at room temperature. The obtained Ni@Cu-MOF electrode delivered a high capacitance of 526 F/g at 1 A/g and had a long-term cycling stability (80% retention after 1200 cycles at 1 A/g) in a 6 M KOH aqueous solution. Furthermore, an asymmetric supercapacitor device was assembled from this Ni@Cu-MOF and activated carbon electrodes. The fabricated supercapacitor delivered a high capacitance of 48.7 F/g at 1 A/g and a high energy density of 17.3 Wh/kg at a power density of 798.5 kW/kg. This study indicates that the Ni@Cu-MOF has great potential for supercapacitor applications.

A modified "gel-blowing" strategy toward the one-step mass production of a 3D N-doped carbon nanosheet@carbon nanotube hybrid network for supercapacitors

In this work, we have realized the synchronous and large-scale synthesis of one-dimensional (1D) carbon nanotubes (CNTs) on two-dimensional (2D) N-doped carbon nanosheets (NCNS) by a one-step annealing of a Ni-containing gel precursor. Upon heating, the gel is "blown" into large-sized 2D NCNS with uniformly embedded Ni nanoparticles that can catalyze the in situ CNT growth, forming a three-dimensional (3D) N-doped carbon nanosheet@carbon nanotube (NCNS@CNT) hybrid. Different from our previous "gel-blowing" strategy for 2D nanosheets, the modified "gel-blowing" strategy is capable of producing 3D architecture by employing a new complexing agent and introducing ethanol as a carbon source. Importantly, this method can be easily scaled up by annealing more gel precursors with an increased amount of ethanol. The introduction of CNTs endows NCNS@CNTs with higher quality and larger specific surface area (SSA) than pure NCNS. Consequently, the electrochemical performance of 3D NCNS@CNTs is much superior to that of 2D NCNS and found to be related with the annealing temperature. The optimized NCNS@CNTs can deliver a specific capacitance of 124 F g-1 at 1 A g-1 and maintain 88% of their initial value after 10 000 cycles at 1 A g-1. Furthermore, NiO nanosheets are deposited on the NCNS@CNT framework to study its function as a conductive host. The as-fabricated hybrid electrode exhibits a high specific capacitance of 660 F g-1 at 1 A g-1 and 532 F g-1 at 20 A g-1, which is also better than its counterpart using NCNS as substrates. This method provides a simplified and low-cost way towards the mass production of NCNS@CNTs for energy application and beyond.