Hollow Metal-Organic-Framework Micro/Nanostructures and their Derivatives: Emerging Multifunctional Materials

Ligand-induced hollow binary metal-organic framework derived Fe-doped cobalt-carbon nanomaterials for oxygen evolution

There is significant anticipation for high-efficiency and cost-effective non-precious metal-based catalysts to advance the industrial application of the anodic oxygen evolution reaction (OER) for hydrogen production. This study introduces an efficient strategy that utilizes ligand-induced metal-organic framework (MOF) building blocks for the synthesis of hollow binary zeolitic imidazolate frameworks 67 (ZIF-67) and Prussian blue analogues (PBAs) (ZIF-67@PBA) heterostructures through a hybrid MOF-on-MOF approach. Manipulating the Co2+/Zn2+ ratio in the precursor ZIF-67 allows for the convenient synthesis of the final product, denoted as CoxFe-ZP, after pyrolysis, where the inclusion of Zn effectively modulates the distribution of Co in the catalyst. The resulting CoxFe-ZP catalysts exhibit a positive synergistic effect between hollow graphitic carbon nanomaterials and Fe-doped Co nanoparticles. The optimal Co0.3Fe-ZP catalyst demonstrates satisfactory OER performance, achieving an overpotential of 302 mV at 10 mA cm-2 and a small Tafel slope of 60.0 mV dec-1. Further analysis of the activation energy confirms that the enhanced OER activity of Co0.3Fe-ZP can be reasonably attributed to the combined influence of its morphology and composition. This study demonstrates a ligand-induced method for examining the morphology and electrochemical properties of grown binary MOF-on-MOF heterostructures for OER applications.

Bending, Twisting, and Propulsion of Photoreactive Crystals by Controlled Gas Release

The rapid release of gas by a chemical reaction to generate momentum is one of the most fundamental ways to elicit motion that could be used to sustain and control the motility of objects. We report that hollow crystals of a three-dimensional supramolecular metal complex that releases gas by photolysis can propel themselves or other objects and advance in space when suspended in mother solution. In needle-like regular crystals, the reaction occurs mainly on the surface and results in the formation of cracks that evolve due to internal pressure; the expansion on the cracked surface of the crystal results in bending, twisting, or coiling of the crystal. In hollow crystals, gas accumulates inside their cavities and emanates preferentially from the recess at the crystal terminus, propelling the crystals to undergo directional photomechanical motion through the mother solution. The motility of the object which can be controlled externally to perform work delineates the concept of "crystal microbots", realized by photoreactive organic crystals capable of prolonged directional motion for actuation or delivery. Within the prospects, we envisage the development of a plethora of light-weight, efficient, autonomously operating robots based on organic crystals with high work capacity where motion over large distances can be attained due to the large volume of latent gas generated from a small volume of the crystalline solid.

Nanocavity in hollow sandwiched catalysts as substrate regulator for boosting hydrodeoxygenation of biomass-derived carbonyl compounds

Hydrodeoxygenation of oxygen-rich molecules toward hydrocarbons is attractive yet challenging in the sustainable biomass upgrading. The typical supported metal catalysts often display unstable catalytic performances owing to the migration and aggregation of metal nanoparticles (NPs) into large sizes under harsh conditions. Here, we develop a crystal growth and post-synthetic etching method to construct hollow chromium terephthalate MIL-101 (named as HoMIL-101) with one layer of sandwiched Ru NPs as robust catalysts. Impressively, HoMIL-101@Ru@MIL-101 exhibits the excellent activity and stability for hydrodeoxygenation of biomass-derived levulinic acid to gamma-valerolactone under 50°C and 1-megapascal H2, and its activity is about six times of solid sandwich counterparts, outperforming the state-of-the-art heterogeneous catalysts. Control experiments and theoretical simulation clearly indicate that the enrichment of levulinic acid and H2 by nanocavity as substrate regulator enables self-regulating the backwash of both substrates toward Ru NPs sandwiched in MIL-101 shells for promoting reaction with respect to solid counterparts, thus leading to the substantially enhanced performance.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Hollow Cu/CoS2 Nanozyme with Defect-Induced Enzymatic Catalytic Sites and Binding Pockets for Highly Sensitive Fluorescence Detection of Alkaline Phosphatase

Along with an ever-deepening understanding of the catalytic principle of natural enzymes, the rational design of high-activity biomimetic nanozymes has become a hot topic in current research. Inspired by the active centers of natural enzymes consisting of catalytic sites and binding pockets, a Cu-doped CoS2 hollow nanocube (Cu/CoS2 HNCs) nanozyme integrating substitution defects and vacancies is developed through a defect engineering strategy. It is shown that the vacancies and substitution defects in the developed Cu/CoS2 HNC nanozymes serve as binding pockets and catalytic sites, respectively. The construction of this key active center and the accelerated electron transfer from the Co/Cu redox cycle significantly improve the substrate affinity and catalytic efficiency of the Cu/CoS2 HNCs nanozymes, which results in the excellent catalytic performance of the Cu/CoS2 HNC nanozymes. Using the superior enzymatic activity of Cu/CoS2 HNCs, a fluorescence detection platform for alkaline phosphatase (ALP) is established, which is a wider detection range and lower limit of detection (LOD) than previous work. This work broadens the family of nanozymes and provide a new idea for the development of novel nanozymes with high enzyme activity, as well as a guideline for the construction of highly sensitive fluorescent sensors.

Ionic Cross-Linked MOF-Polymer Mixed-Matrix Membranes for Suppressing Interfacial Defects and Plasticization Behavior

To address the plasticization phenomenon and MOF-polymer interfacial defects, we report the synthesis of ionic cross-linked MOF MMMs from a dual brominated polymer and MOF components by using N,N'-dimethylpiperazine as the cross-linker. We synthesized brominated MIL-101(Cr) nanoparticles by using mixed linkers and prepared brominated polyimide (6FDA-DAM-Br) to form ionic cross-linked MMMs. The gas permeation properties of the polyimide, ionic cross-linked MOF-polymer MMMs, and non-cross-linked MOF-polymer MMMs with various MOF weight loadings were investigated systematically to effectively understand the effects of MOF weight loading and ionic cross-linking. The ionic cross-linked 40 wt % MOF-polymer MMM exhibited significantly enhanced gas permeability with an H2 permeability of 1640 Barrer and CO2 permeability of 1981 Barrer and slightly decreased H2/CH4, H2/N2, CO2/CH4 and CO2/N2 selectivities of 16.9, 15.4, 20.5, and 18.6, respectively. The H2 and CO2 permeabilities are approximately 2-3 fold higher than those of the pure polyimide (6FDA-DAM) membrane. Moreover, the ionic cross-linked 40 wt % MOF-polymer MMM exhibited significantly increased resistance to plasticization. This is because the brominated MOF incorporation boosted molecular transport and polymer chain rigidity, and ionic cross-linking further reduced the number of interfacial defects and polymer chain mobility.

Exfoliation of Metal-Organic Frameworks to Give 2D MOF Nanosheets for the Electrocatalytic Oxygen Evolution Reaction

The structure and properties of materials are determined by a diverse range of chemical bond formation and breaking mechanisms, which greatly motivates the development of selectively controlling the chemical bonds in order to achieve materials with specific characteristics. Here, an orientational intervening bond-breaking strategy is demonstrated for synthesizing ultrathin metal-organic framework (MOF) nanosheets through balancing the process of thermal decomposition and liquid nitrogen exfoliation. In such approach, proper thermal treatment can weaken the interlayer bond while maintaining the stability of the intralayer bond in the layered MOFs. And the following liquid nitrogen treatment results in significant deformation and stress in the layered MOFs' structure due to the instant temperature drop and drastic expansion of liquid N2, leading to the curling, detachment, and separation of the MOF layers. The produced MOF nanosheets with five cycles of treatment are primarily composed of nanosheets that are less than 10 nm in thickness. The MOF nanosheets exhibit enhanced catalytic performance in oxygen evolution reactions owing to the ultrathin thickness without capping agents which provide improved charge transfer efficiency and dense exposed active sites. This strategy underscores the significance of orientational intervention in chemical bonds to engineer innovative materials.

Construction of Indium(III)-Organic Framework Based on a Flexible Cyclotriphosphazene-Derived Hexacarboxylate as a Reusable Green Catalyst for the Synthesis of Bioactive Aza-Heterocycles

The constant demand for eco-friendly methods of synthesizing complex organic compounds inspired researchers to design and develop modern, highly efficient heterogeneous catalytic systems. Herein, In-HCPCP metal-organic framework (SRMIST-1), a heterogeneous Lewis acid catalyst containing less toxic indium and eco-friendly robust cyclotriphosphazene and exhibiting notable chemical and thermal stability, durable catalytic activity, and exceptional reusability was produced through the reaction between indium(III) nitrate hydrate and hexakis(4-carboxylatophenoxy)-cyclotriphosphazene. In the SRMIST-1 structure, secondary building units {InO7} are assembled by a connection of η2- and η1-carboxylic oxo atoms from different HCPCP ligands, forming a three-dimensional network. The occurrence of regularly distributed In(III) sites in SRMIST-1 confers superior reactivity on the catalyst toward the synthesis of 2,3-dihydroquinazolin-4(1H)-ones and 3,4-dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxides by the cyclization reaction of 2-aminobenzamides and 2-aminobenzenesulphonamides with aldehydes under optimized reaction conditions, respectively. The notable features of this method include broad functional group compatibility, low catalyst loading (1-5 mol %), mild reaction conditions, easy workup procedures, good to excellent reaction yields, ethanol as a green solvent, reusability of the catalyst (five cycles), and economic attractiveness, which is mainly due to sustainability of SRMIST-1 as a reusable green catalyst. Our findings demonstrate that the highly reactive and reusable green catalyst finds widespread applications in medicinal chemistry.

A Coordination-Derived Cerium-Based Amorphous-Crystalline Heterostructure with High Electrocatalytic Oxygen Evolution Activity

The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx ) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx , exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.

Unlocking the Design Paradigm of In-Plane Heterojunction with Built-in Bifunctional Anion Vacancy for Unexpectedly Fast Sodium Storage

Transition metal chalcogenide (TMD) electrodes in sodium-ion batteries exhibit intrinsic shortcomings such as sluggish reaction kinetics, unstable conversion thermodynamics, and substantial volumetric strain effects, which lead to electrochemical failure. This report unlocks a design paradigm of VSe2- x /C in-plane heterojunction with built-in anion vacancy, achieved through an in situ functionalization and self-limited growth approach. Theoretical and experimental investigations reveal the bifunctional role of the Se vacancy in enhancing the ion diffusion kinetics and the structural thermodynamics of Nax VSe2 active phases. Moreover, this in-plane heterostructure facilitates complete face contact between the two components and tight interfacial conductive contact between the conversion phases, resulting in enhanced reaction reversibility. The VSe2- x /C heterojunction electrode exhibits remarkable sodium-ion storage performance, retaining specific capacities of 448.7 and 424.9 mAh g-1 after 1000 cycles at current densities of 5 and 10 A g-1 , respectively. Moreover, it exhibits a high specific capacity of 353.1 mAh g-1 even under the demanding condition of 100 A g-1 , surpassing most previous achievements. The proposed strategy can be extended to other V5 S8- x and V2 O5- x -based heterojunctions, marking a conceptual breakthrough in advanced electrode design for constructing high-performance sodium-ion batteries.

Ag-Coated Ternary Layered Double Hydroxide as a High-Performance SERS Sensor for Aldehydes

Volatile organic compounds (VOCs) are common environmental pollutants and important biomarkers for early diagnosis of lung cancer. However, aldehydes are difficult to detect directly due to their small Raman scattering cross-section and gaseous phase. Here, a Ag-coated ternary layered double hydroxide (LDH) was designed for the detection and identification of various aldehydes. The specific surface area of CoNi-LDH was increased by doping Fe3+, which provides abundant active sites to capture gas molecules. Furthermore, the energy band gap (Eg) was decreased due to the local amorphous FeCoNi-LDH with an extended band tail, promoting the excitonic transition of Fe0.07(CoNi)0.93-LDH. In addition, the Fermi level of Ag prevented the recombination of electron-hole pairs of Fe0.07(CoNi)0.93-LDH, providing a new bridge for charge transfer between the substrate and the molecule. Ag/Fe0.07(CoNi)0.93-LDH presented excellent surface-enhanced Raman scattering (SERS) performance for aldehyde VOCs by modification with 4-aminothiophenol (4-ATP) to capture aldehydes and realized the detection of benzaldehyde (BZA) at 10 ppb. The enhancement and Raman shift of the b2 mode indicated the contribution of chemical enhancement to the SERS system, so the substrate presented good uniformity. The recycling of the SERS substrate is realized based on the reversibility of the Schiff base reaction. These results manifested that Ag/FeCoNi-LDH has a wide prospect in the application in the trace detection of aldehydes.

Functional Carbon Capsules Supporting Ruthenium Nanoclusters for Efficient Electrocatalytic 99 TcO4 - /ReO4 - Removal from Acidic and Alkaline Nuclear Wastes

The selective removal of the β-emitting pertechnetate ion (99 TcO4 - ) from nuclear waste streams is technically challenging. Herein, a practical approach is proposed for the selective removal of 99 TcO4 - (or its surrogate ReO4 - ) under extreme conditions of high acidity, alkalinity, ionic strength, and radiation field. Hollow porous N-doped carbon capsules loaded with ruthenium clusters (Ru@HNCC) are first prepared, then modified with a cationic polymeric network (R) containing imidazolium-N+ units (Ru@HNCC-R) for selective 99 TcO4 - and ReO4 - binding. The Ru@HNCC-R capsules offer high binding affinities for 99 TcO4 - /ReO4 - under wide-ranging conditions. An electrochemical redox process then transforms adsorbed ReO4 - to bulk ReO3 , delivering record-high removal capacities, fast kinetics, and excellent long-term durability for removing ReO4 - (as a proxy for 99 TcO4 - ) in a 3 m HNO3 , simulated nuclear waste-Hanford melter recycle stream and an alkaline high-level waste stream (HLW) at the U.S. Savannah River Site (SRS). In situ Raman and X-ray absorption spectroscopy (XAS) analyses showed that adsorbed Re(VII) is electrocatalytically reduced on Ru sites to a Re(IV)O2 intermediate, which can then be re-oxidized to insoluble Re(VI)O3 for facile collection. This approach overcomes many of the challenges associated with the selective separation and removal of 99 TcO4 - /ReO4 - under extreme conditions, offering new vistas for nuclear waste management and environmental remediation.

Lanthanide-grafted hollow bipyridine-based periodic mesoporous organosilicas as chemical sensors

We have synthesized a co-condensed hollow ethane-bipyridine periodic mesoporous organosilica (HEt-bpy-PMO) as a host material to anchor lanthanides for the purpose of developing a multifunctional chemical sensor. The host material was grafted with lanthanide chloride salts or complexes. The luminescence properties of the developed series of hybrid materials were studied in detail in the solid-state and after dispersing in water. The Eu3+ or Tb3+ singly incorporated materials were investigated for their use as ion sensors, showing ions selectivity towards Cu2+, Co2+ and Fe3+. Additionally, the Eu3+ or Tb3+ incorporated materials showed obvious luminescence quenching behavior towards acetone compared to other organic solvents, indicating excellent acetone sensing selectivity.

Coordinated Immobilization and Rapid Conversion of Polysulfide Enabled by a Hollow Metal Oxide/Sulfide/Nitrogen-Doped Carbon Heterostructure for Long-Cycle-Life Lithium-Sulfur Batteries

Lithium-sulfur batteries (LSBs) are recognized as the prospective candidate in next-generation energy storage devices due to their gratifying theoretical energy density. Nonetheless, they still face the challenges of the practical application including low utilization of sulfur and poor cycling life derived from shuttle effect of lithium polysulfides (LiPSs). Herein, a hollow polyhedron with heterogeneous CoO/Co9 S8 /nitrogen-doped carbon (CoO/Co9 S8 /NC) is obtained through employing zeolitic imidazolate framework as precursor. The heterogeneous CoO/Co9 S8 /NC balances the redox kinetics of Co9 S8 with chemical adsorption of CoO toward LiPSs, effectively inhibiting the shuttle of LiPSs. The mechanisms are verified by both experiment and density functional theory calculation. Meanwhile, the hollow structure acts as a sulfur storage chamber, which mitigates the volumetric expansion of sulfur and maximizes the utilization of sulfur. Benefiting from the above advantages, lithium-sulfur battery with S-CoO/Co9 S8 /NC achieves a high initial discharge capacity (1470 mAh g-1 ) at 0.1 C and long cycle life (ultralow capacity attenuation of 0.033% per cycle after 1000 cycles at 1 C). Even under high sulfur loading of 3.0 mg cm-2 , lithium-sulfur battery still shows the satisfactory electrochemical performance. This work may provide an idea to elevate the electrochemical performance of LSBs by constructing a hollow metal oxide/sulfide/nitrogen-doped carbon heterogeneous structure.

Modulation of magnetization dynamics of an Er(III) coordination polymer by the conversion of a ligand to a radical using UV light

Light-induced substance conversion is highly promising for creating new radical-based compounds. Herein, we report an Er(III) coordination polymer [Er(CA)(ACA)(DMF)(H₂O)]_n (1) and its Y(III)-diluted analogue 1@Y (H₂CA = 2,5-dichloro-3,6-dihydroxy-p-quinone, HACA = 9-anthracene carboxylic acid) with the light-induced transformation of the ligand to a radical. The χ_MT values of light-transformed products 1a and 1a@Y are higher than those of 1 and 1@Y, respectively, due to the formation of radicals by ultraviolet light irradiation, confirmed by EPR measurement as well. The effective energy barriers for magnetization reversal (U_eff) decrease from 72 K for 1 to 67 K for 1a, and from 117 K for 1@Y to 94 K for 1a@Y. This work not only provides a new light-conversion system but also reveals the nature of photo-induced variation of magnetic properties.

Structure and oxygen vacancy engineered CuCo-layered double oxide nanotube arrays as advanced bifunctional electrocatalysts for overall water splitting

In recent years, as a green renewable energy production technology, electrochemical water splitting has demonstrated high development potential. Many materials have been reported as successful catalysts in the water-splitting field. However, it is still a huge challenge to produce bifunctional electrocatalysts for the efficient and sustainable generation of hydrogen and oxygen simultaneously. Herein, we successfully developed oxygen vacancies abundant CuCo layered double oxide (O_v-CuCo-LDO) hollow nanotube arrays (HNTAs) loaded on nickel foam as advanced electrocatalysts for total water splitting. When the current density was 10 mA cm^-2, the O_v-CuCo-LDO HNTAs exhibited outstanding onset overpotentials of 53.9 and 72.5 mV for the hydrogen evolution and oxygen evolution reactions (HER and OER) in alkaline medium, respectively, because of the bimetallic synergistic effect between the cobalt and copper and the unique hollow porous structure. In addition, an as-assembled O_v-CuCo-LDO||O_v-CuCo-LDO electrolytic cell showed a small potential of 1.55 V to deliver a current density of 10 mA cm^-2. Moreover, it also showed remarkable durability after long-term overall water splitting for more than 20 h. The research results in this paper are of great interest to practical applications of the water decomposition process, providing clear and in-depth insights into preliminary robust and efficient multifunctional electrocatalysts for overall water splitting.

Recrystallization of 2D C-MOF Films for High-Performance Electrochemical Sensors

Two-dimensional (2D) conjugated metal-organic framework (c-MOF) films bring a completely new opportunity in the fields of catalysis, energy, and sensors, but preparing large-area continuous 2D c-MOF films remains a tremendous challenge. Here, we report a universal recrystallization strategy to synthesize large-area continuous 2D c-MOF films, revealing that the recrystallization strategy can significantly improve the electrochemical sensor sensitivity. Applying the 2D Cu₃(HHTP)₂ (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) c-MOF film as the active layer, the electrochemical sensor for glucose detection shows a high sensitivity of 20600 μA mM^-1 cm^-2, which is the best compared with the active materials reported previously. Most importantly, the as-made Cu₃(HHTP)₂ c-MOF-based electrochemical sensor possesses excellent stability. Overall, this work brings a brand-new universal strategy to prepare large-area continuous 2D c-MOF films for electrochemical sensors.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

Metal-Organic Frameworks (MOF)-Assisted Sonodynamic Therapy in Anticancer Applications

Sonodynamic therapy (SDT) has emerged as a promising therapeutic modality for anticancer treatments and is becoming a cutting-edge interdisciplinary research field. This review starts with the latest developments of SDT and provides a brief comprehensive discussion on ultrasonic cavitation, sonodynamic effect, and sonosensitizers in order to popularize the basic principles and probable mechanisms of SDT. Then the recent progress of MOF-based sonosensitizers is overviewed, and the preparation methods and properties (e.g., morphology, structure, and size) of products are presented in a fundamental perspective. More importantly, many deep observations and understanding toward MOF-assisted SDT strategies were described in anticancer applications, aiming to highlight the advantages and improvements of MOF-augmented SDT and synergistic therapies. Last but not least, the review also pointed out the probable challenges and technological potential of MOF-assisted SDT for the future advance. In all, the discussions and summaries of MOF-based sonosensitizers and SDT strategies will promote the fast development of anticancer nanodrugs and biotechnologies.

A "Pre-Division Metal Clusters" Strategy to Mediate Efficient Dual-Active Sites ORR Catalyst for Ultralong Rechargeable Zn-Air Battery

To conquer the bottleneck of sluggish kinetics in cathodic oxygen reduction reaction (ORR) of metal-air batteries, catalysts with dual-active centers have stood out. Here, a "pre-division metal clusters" strategy is firstly conceived to fabricate a N,S-dual doped honeycomb-like carbon matrix inlaid with CoN₄ sites and wrapped Co₂ P nanoclusters as dual-active centers (Co₂ P/CoN₄ @NSC-500). A crystalline {Co^II ₂ } coordination cluster divided by periphery second organic layers is well-designed to realize delocalized dispersion before calcination. The optimal Co₂ P/CoN₄ @NSC-500 executes excellent 4e^- ORR activity surpassing the benchmark Pt/C. Theoretical calculation results reveal that the CoN₄ sites and Co₂ P nanoclusters can synergistically quicken the formation of *OOH on Co sites. The rechargeable Zn-air battery (ZAB) assembled by Co₂ P/CoN₄ @NSC-500 delivers ultralong cycling stability over 1742 hours (3484 cycles) under 5 mA cm^-2 and can light up a 2.4 V LED bulb for ≈264 hours, evidencing the promising practical application potentials in portable devices.

Low quantity of Pt loaded onto CeCoOx nanoboxes: Surface-rich reactive oxygen species for catalytic oxidation of toluene

An optimized oxygen activity of catalysts can facilitate oxidation of volatile organic compounds. This work shows the first construction of Ce-Co oxide thin-walled nanoboxes. Bulk-phase lattice oxygen is activated by metal-metal interactions. The subsequent uniform dispersion of low loaded Pt nanoparticles further enhances the surface-adsorbed oxygen content, and creates an oxygen-rich reaction interface. Competitive adsorption of water vapor was also inhibited, and complete catalytic oxidation of toluene was achieved at low temperature (T₉₀ =140 °C). A diffuse reflectance infrared Fourier-transform spectroscopy probe was used to investigate the adsorption-catalytic process and the possible synergistic catalytic mechanism (Langmuir-Hinshelwood and Mars-van Krevelen). This work provides a strategy for improving the catalyt Crystal structure ic oxidation performance of nanocatalysts for volatile organic compounds by increasing the catalytic oxygen activity.

Metal-organic framework derived vanadium oxide supported nanoporous carbon structure as a bifunctional electrocatalyst for potential application in metal air batteries

High-efficiency, sustainable, non-precious metal-based electrocatalysts with bifunctional catalytic activity for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are essential for metal-air batteries. In this research, a bifunctional electrocatalyst is developed by synthesizing a novel nanoporous vanadium oxide/carbon composite (NVC-900) through pyrolysis of a highly efficient vanadium metal-organic framework, MIL-101 (V). The fabrication process was conveniently carried out by pyrolyzing the synthesized MIL-101 (V) at 900 °C, producing vanadium oxide nanoparticles embedded in the extensively distributed pores of the carbon network. The evenly distributed nanopores substantially improve the performance of the efficient electrocatalyst for both the oxygen reduction reaction and oxygen evolution reactions (ORR/OER) by increasing surface area and facilitating access to stable catalytic active sites. The unique structure was characterized by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). For oxygen reduction reaction (ORR), the electrocatalyst established a promising limiting current density (J _L) of 5.2 mA cm^-2 at 1600 rpm at an onset potential of 1.18 V and a half-wave potential of 0.82 V, and for OER, a current density of 10 mA cm^-2 was delivered at a potential of 1.48 V. In comparison to 10% Pt/C, the synthesized bifunctional electrocatalyst being almost equally active towards bifunctional activity, showed much better long-term cyclic stability. The one-step thermal pyrolysis strategy to synthesize the nanoporous functional material and the proposed electrocatalytic material's long-term bifunctional activity and durability make it an ideal fit for next-generation portable green metal-air batteries.

A Novel Instantaneous Self-Assembled Hollow MOF-Derived Nanodrug for Microwave Thermo-Chemotherapy in Triple-Negative Breast Cancer

Hollow materials derived from metal-organic frameworks (MOFs) have emerged in the biomedical field due to their unique properties, and different synthesis methods have been proposed. However, so far, the large-scale use of hollow MOFs is mostly limited by the timeliness of synthesis methods. Herein, we propose a new ultrasonic aerosol flow strategy for the instantaneous synthesis of a Zr-MOF-derived hollow sphere complex (ZC-HSC) in only one step. Through rapid transient heating, the coordination between metal salts and organic ligands occurs along with prompt evaporation of the solvent. The whole process lasts for only about 21 s, compared with several steps that take hours or even days for conventional synthesis methods. Based on the ZC-HSC, we designed a nanodrug with the functions of manipulating the tumor microenvironment, which can reshape the tumor microenvironment by improving tumor hypoxia and inflammatory microenvironment and promoting antiangiogenic therapy. Combined with microwave thermo-chemotherapy, the nanodrugs effectively treat triple-negative breast cancer (the tumor cell survival rate was only 34.76 and 31.05% in normoxic and hypoxic states, respectively, and the tumor inhibition rate reached 87.9% at the animal level), providing a new theoretical basis for the treatment of triple-negative breast cancer. This rapid, one-step, and continuous ultrasonic aerosol flow strategy has bright prospects in the synthesis of MOF-derived hollow materials and promotes the further development of large-scale applications of biological nanomaterials.

A robust hollow metal-organic framework with enhanced diffusion for size selective catalysis

Single crystalline (SC) hollow metal-organic frameworks (MOFs) are excellent host materials for molecular and nanoparticle catalysts. However, due to synthetic challenges, chemically robust SC hollow MOFs are rare. This work reports the construction of a defect-free and chemically stable SC hollow MOF, MOF-801(h), through templated growth from a unit cell mismatched core, UiO-66. Under the protection of excess MOF-801 ligand, fumaric acid, the MOF-801 shell was perfectly retained while the isoreticular UiO-66 core was selectively and completely etched away by formic acid. The combination of a large cavity, small aperture and short diffusion length allows the Pt nanoparticle encapsulated composite catalyst, Pt⊂MOF-801(h), to perform size selective hydrogenation of nitro compounds at an accelerated speed. Impressively, the catalyst can undergo concentrated HCl or boiling water treatment while maintaining its crystallinity, morphology, catalytic activity, and size selectivity. In addition, Au nanoparticles encapsulated catalyst, Au⊂MOF-801(h), was used for the size selective nucleophilic addition of HCl to terminal alkynes for the first time, which is a harsh reaction involving high concentrations of a strong acid.

Targeted OUM1/PTPRZ1 silencing and synergetic CDT/enhanced chemical therapy toward uveal melanoma based on a dual-modal imaging-guided manganese metal–organic framework nanoparticles

Metastasis and chemical resistance are the most serious problems in the treatment of highly aggressive uveal melanoma (UM). The newly identified lncRNA OUM1 is overexpressed in UM, functions as a catalyst and regulates protein tyrosine phosphatase (PTP) activity by binding to PTP receptor type Z1 (PTPRZ1), which plays an important role in cell proliferation, metastasis and chemotherapy resistance in the UM microenvironment. Hence, siRNAs that selectively knocking down the lncRNA OUM1 (siOUM1) and its target gene PTPRZ1 (siPTPRZ1) were designed to inhibit the OUM1/PTPRZ1 pathway to reduce PTP activity, and this reduction in activity interrupts protein tyrosine phosphorylation, suppresses UM proliferation and metastasis and improves cisplatin sensitivity in UM cells. Then, to overcome the limitations of the difficulty of drug administration and traditional therapeutics, the indocyanine green (ICG)-labeled manganese metal–organic framework (MOF) nanoparticles (NPs) were fabricated and linked with arginine-glycine-aspartate (RGD) peptide to carry siOUM1/siPTPRZ1 and cisplatin to achieve targeted siRNA interference-mediated therapy, enhanced cisplatin therapy and chemodynamic therapy. This NP system also has a dual-modal imaging ability because ICG is a near-infrared region fluorescent dye and manganese has the potential to be used in magnetic resonance imaging. This study verifies the significance of the newly discovered lncRNA OUM1 as a new therapeutic target for aggressive UM and provides a drug delivery NP system for precise treatment of UM accompanied with a dual-modal imaging ability.

Metal-organic frameworks and their derivatives for metal-ion (Li, Na, K and Zn) hybrid capacitors

Metal-ion hybrid capacitors (MIHCs) hold particular promise for next-generation energy storage technologies, which bridge the gap between the high energy density of conventional batteries and the high power density and long lifespan of supercapacitors (SCs). However, the achieved electrochemical performance of available MIHCs is still far from practical requirements. This is primarily attributed to the mismatch in capacity and reaction kinetics between the cathode and anode. In this regard, metal-organic frameworks (MOFs) and their derivatives offer great opportunities for high-performance MIHCs due to their high specific surface area, high porosity, topological diversity, and designable functional sites. In this review, instead of simply enumerating, we critically summarize the recent progress of MOFs and their derivatives in MIHCs (Li, Na, K, and Zn), while emphasizing the relationship between the structure/composition and electrochemical performance. In addition, existing issues and some representative design strategies are highlighted to inspire breaking through existing limitations. Finally, a brief conclusion and outlook are presented, along with current challenges and future opportunities for MOFs and their derivatives in MIHCs.

Buffet-style Cu(II) for enhance disulfiram-based cancer therapy

Studies have shown that disulfiram (DSF) can combine with Cu²⁺ to form bis(N, N-diethyldithiocarbamate) copper(II) complex (CuET) as antitumor drugs. However, there is insufficient endogenous Cu²⁺ dose to eradicate cancer cells selectively. Inspired by the buffet, we use Cu²⁺ doped hollow zeolitic imidazolate framework nanoparticles (HZIF_Cu) as the carrier and equipped with DSF and indocyanine green (ICG) and targeted by folic acid (FA) (D&I@HZIF_Cu-FA) to enhance DSF-based cancer therapy. D&I@HZIF_Cu-FA could effectively supply Cu²⁺ by a buffet-style, assisting the "DSF-to-CuET" transformation in the tumor. Additionally, self-supply Cu²⁺ could convert H₂O₂ into ·OH by triggering a Fenton-like reaction for chemo-dynamic therapy, and ICG achieves photothermal therapy for tumors under laser irradiation. This work provides a buffet-style for Cu²⁺ to make DSF a strong candidate for cancer treatment by combining chemotherapy, chemo-dynamic therapy, and photothermal therapy and inspires more research about its applications in tumor therapy.

Potassium-Assisted Fabrication of Intrinsic Defects in Porous Carbons for Electrocatalytic CO2 Reduction

The fabrication of intrinsic carbon defects is usually tangled with doping effects, and the identification of their unique roles in catalysis remains a tough task. Herein, a K⁺ -assisted synthetic strategy is developed to afford porous carbon (K-defect-C) with abundant intrinsic defects and complete elimination of heteroatom via direct pyrolysis of K⁺ -confined metal-organic frameworks (MOFs). Positron-annihilation lifetime spectroscopy, X-ray absorption fine structure measurement, and scanning transmission electron microscopy jointly illustrate the existence of abundant 12-vacancy-type carbon defects (V₁₂ ) in K-defect-C. Remarkably, the K-defect-C achieves ultrahigh CO Faradaic efficiency (99%) at -0.45 V in CO₂ electroreduction, far surpassing MOF-derived carbon without K⁺ etching. Theoretical calculations reveal that the V₁₂ defects in K-defect-C favor CO₂ adsorption and significantly accelerate the formation of the rate-determining COOH* intermediate, thereby promoting CO₂ reduction. This work develops a novel strategy to generate intrinsic carbon defects and provides new insights into their critical role in catalysis.

Advances in plasmonic-based MOF composites, their bio-applications and perspectives in this field

INTRODUCTION

Nanomaterials have been used for bio-applications since the late 20st century. In an attempt to tailor and optimize their properties, and by extension their efficiency, composites have attracted considerable attention. In this regard, recent studies on plasmonic nanoparticles and metal-organic framework (NP@MOF) composites suggested these materials show great promise in this field.

AREAS COVERED

This review focused on the more recent scientific advances in the synthetic strategies to optimize plasmonic MOF nanocomposites currently available, as well as their bio-application, particularly as biosensors and therapy.

EXPERT OPINION

Plasmonic MOF nanocomposites have shown great potential as they combine the properties of both materials with proven efficiency in bio-application. On the one hand, nanoMOFs have proven their potential particularly as drug nanocarriers, owing to their exceptional porosity and tunability. On the other hand, plasmonic nanoparticles have been an asset for imaging and phototherapy. Different strategies have been reported to develop these nanocomposites, mainly including core-shell, encapsulation, and in situ reduction. In addition, advanced composite structures should be considered, such as mixed metal nanoparticles, hollow structures or the combination of several approaches. Specifically, plasmonic MOF nanocomposites prove to be attractive stimuli responsive drug delivery systems, phototherapeutic agents as well as highly sensitive biosensors.

Metal-organic framework nanocrystal-derived hollow porous materials: Synthetic strategies and emerging applications

Metal-organic frameworks (MOFs) have garnered multidisciplinary attention due to their structural tailorability, controlled pore size, and physicochemical functions, and their inherent properties can be exploited by applying them as precursors and/or templates for fabricating derived hollow porous nanomaterials. The fascinating, functional properties and applications of MOF-derived hollow porous materials primarily lie in their chemical composition, hollow character, and unique porous structure. Herein, a comprehensive overview of the synthetic strategies and emerging applications of hollow porous materials derived from MOF-based templates and/or precursors is given. Based on the role of MOFs in the preparation of hollow porous materials, the synthetic strategies are described in detail, including (1) MOFs as removable templates, (2) MOF nanocrystals as both self-sacrificing templates and precursors, (3) MOF@secondary-component core-shell composites as precursors, and (4) hollow MOF nanocrystals and their composites as precursors. Subsequently, the applications of these hollow porous materials for chemical catalysis, electrocatalysis, energy storage and conversion, and environmental management are presented. Finally, a perspective on the research challenges and future opportunities and prospects for MOF-derived hollow materials is provided.

•

MOFs have garnered multi-disciplinary attention due to their unique inherent properties

•

Various synthetic strategies of MOFs-derived hollow porous materials are summarized

•

Emerging applications of MOFs-derived hollow porous materials are reviewed

A visual and reversible nanoprobe for rapid and on-site determination of hexavalent chromium and lysine based on dual-emission carbon quantum dots coupled with smartphone

A straightforward, largely instrument-free, smartphone-based analytical strategy for hexavalent chromium and lysine (Lys) on-site detection via exploitation of dual-emission carbon quantum dots (DECQDs) has been demonstrated. DECQDs show dual-emission peaks at 439 and 630 nm with the excitation at 375 nm. As a dual-mode detection probe, the fluorescence and ultraviolet adsorption spectra of DECQDs vary with hexavalent chromium concentrations. Most importantly, Lys can restore the fluorescence of the hexavalent chromium added DECQD nanoprobe and change the color of the probe under natural light. At the same time, based on the participation of smartphones, the prepared DECQD probes favor the establishment of visual smart sensors that can also be used for the in-situ detection of targets. The on-site quantitative analysis exhibited a linear range of 5.3-320 μM with a detection limit of 1.6 μM towards Cr(VI) and the differentiation of Lys variation from 1 to 75 mM with a detection limit of 0.3 mM. The probe has been applied for the first time to enable vision-based colorimetric in complex samples such as water, milk and egg. The recoveries of Cr(VI) and Lys in real samples were between 90 and 104%, and the relative standard deviation (RSD) was as low as 0.4%. This work offers new perspectives for fundamental understanding and new design of functional luminescent materials that are applicable for food-safety and rapid and intelligent inspection. A straightforward, large instrument-free, smartphone-based analytical strategy with dual-emission carbon quantum dots was developed for hexavalent chromium and Lys on-site detection via fluorescent and colorimetric twofold readout measure.

Noble-Metal-Based Hollow Mesoporous Nanoparticles: Synthesis Strategies and Applications

As second-generation mesoporous materials, mesoporous noble metals (NMs) are of significant interest for their wide applications in catalysis, sensing, bioimaging, and biotherapy owing to their structural and metallic features. The introduction of interior hollow cavity into NM-based mesoporous nanoparticles (MNs), which subtly integrate hierarchical hollow and mesoporous structure into one nanoparticle, produces a new type of hollow MNs (HMNs). Benefiting from their higher active surface, better electron/mass transfer, optimum electronic structure, and nanoconfinement space, NM-based HMNs exhibit their high efficiency in enhancing catalytic activity and stability and tuning catalytic selectivity. In this review, recent progress in the design, synthesis, and catalytic applications of NM-based HMNs is summarized, including the findings of the groups. Five main strategies for synthesizing NM-based HMNs, namely silica-assisted surfactant-templated nucleation, surfactant-templated sequential nucleation, soft "dual"-template, Kirkendall effect in synergistic template, and galvanic-replacement-assisted surfactant template, are described in detail. In addition, the applications in ethanol oxidation electrocatalysis and hydrogenation reactions are discussed to highlight the high activity, enhanced stability, and optimal selectivity of NM-based HMNs in (electro)catalysis. Finally, the further outlook that may lead the directions of synthesis and applications of NM-based HMNs is prospected.

Heteronanostructural metal oxide-based gas microsensors

The development of high-performance, portable and miniaturized gas sensors has aroused increasing interest in the fields of environmental monitoring, security, medical diagnosis, and agriculture. Among different detection tools, metal oxide semiconductor (MOS)-based chemiresistive gas sensors are the most popular choice in commercial applications and have the advantages of high stability, low cost, and high sensitivity. One of the most important ways to further enhance the sensor performance is to construct MOS-based nanoscale heterojunctions (heteronanostructural MOSs) from MOS nanomaterials. However, the sensing mechanism of heteronanostructural MOS-based sensors is different from that of single MOS-based gas sensors in that it is fairly complex. The performance of the sensors is influenced by various parameters, including the physical and chemical properties of the sensing materials (e.g., grain size, density of defects, and oxygen vacancies of materials), working temperatures, and device structures. This review introduces several concepts in the design of high-performance gas sensors by analyzing the sensing mechanism of heteronanostructural MOS-based sensors. In addition, the influence of the geometric device structure determined by the interconnection between the sensing materials and the working electrodes is discussed. To systematically investigate the sensing behavior of the sensor, the general sensing mechanism of three typical types of geometric device structures based on different heteronanostructural materials are introduced and discussed in this review. This review will provide guidelines for readers studying the sensing mechanism of gas sensors and designing high-performance gas sensors in the future.

Research progress on ZnSe and ZnTe anodes for rechargeable batteries

Transition-metal chalcogenides (TMCs) with tunable direct bandgaps and interlayer spacing are attractive for energy-related applications. Semiconducting zinc chalcogenides, especially their selenides (ZnSe) and tellurides (ZnTe), with enhanced conductivity, high theoretical capacity, low operation voltage and abundance, have appeared on the horizon and receive increasing interest in terms of electrochemical energy storage and conversion. Despite the existing typical obstruction owing to the large volume change, relatively low electrical conductivity and sluggish ion diffusion kinetics into the bulk phase, several effective strategies such as compositing, doping, nanostructuring, and electrode/cell design have exhibited promising applications. We herein provide a timely and systematic overview of recent research and significant advances regarding ZnSe, ZnTe and their hybrids/composites, covering synthesis to electrode design and to applications, especially in advanced Li/Na/K-ion batteries, as well as the reaction mechanisms thereof. It is hoped that the overview will shed new light on the development of ZnSe and ZnTe for next-generation rechargeable batteries.

A simple and versatile synthesis strategy of hollow MOFs for CO2 separation and catalysis

A novel single-solvent-interfacial strategy is proposed to synthesize hollow MOFs, fabricated at the two-phase interface originated from the self-deliquescence of hydration water in the metallic precursors and the solvents with low water solubility. The as-fabricated HMOFs with hierarchically porous structures exhibit significant enhancement in CO₂ separation and catalysis.

Growth Pattern Control and Nanoarchitecture Engineering of Metal-Organic Framework Single Crystals by Confined Space Synthesis

The nanoarchitecture engineering of metal-organic frameworks (MOFs) is a fascinating but intellectually challenging concept that opens up avenues for both tailoring the properties of MOFs and expanding their applications. Herein, we report the confined growth of ZIF-8 single crystals in a three-dimensionally ordered (3DO) macroporous polystyrene replica and reveal that their growth patterns, morphologies, and nanoarchitectures can be highly engineered using the concentration of the precursor. Impressively, the favorable in situ confined growth enables the successful fabrication of 3DO sphere-assembled ZIF-8 single crystals or 3DO single-crystalline ZIF-8 sphere arrays when a low- or high-concentration precursor solution, respectively, is used as the feedstock. Furthermore, our strategy can be extended to the preparation of other 3DO MOF single crystals, including ZIF-67 and HKUST-1, with similar controllable hierarchical nanoarchitectures. With the successful preparation of a series of diameter-tunable ZIF-8 single-crystalline spheres, we further unravel their interesting size-performance relationship in the Knoevenagle reaction between benzaldehyde and malononitrile, wherein the smallest spheres show the fastest first-order reaction kinetics. This study not only develops a general strategy for engineering the nanoarchitectures of MOF single crystals but also provides fundamental knowledge of the mechanism for the growth of hierarchical single crystals under confined spaces.

Sandwich-Structured Hybrid of NiCo Nanoparticles-Embedded Carbon Nanotubes Grafted on C3N4 Nanosheets for Efficient Photodehydrogenative Coupling Reactions

Exploring cheap and efficient hybrid catalysts offers exciting opportunities for enhancing the performance of photocatalysts in the green organic synthesis field. Herein, a facile and effective approach is designed for the synthesis of a sandwich-structured hybrid in which NiCo bimetallic nanoparticles are embedded in the tip of nitrogen-doped carbon nanotubes (N-CNTs) grafted on both sides of a nitrogen deficient C₃N₄ (N_v-C₃N₄) nanosheet for photodehydrogenative coupling reactions. Such a brand-new type of sandwich-structured hybrid comprises N_v-C₃N₄ nanosheets and surrounding N-CNTs embedded with NiCo nanoparticles at their tips. Remarkably, the resultant hybrid exhibits integrated functionalities, abundant active sites, enhanced visible light absorption, and excellent interfacial charge transfer ability. As a result, the optimized NiCo@N-CNTs@N_v-C₃N₄ photocatalyst shows significantly improved photodehydrogenative coupling performance of amines to imines compared to the control single-metal-based catalysts (Ni@N-CNTs@N_v-C₃N₄ and Co@N-CNTs@N_v-C₃N₄). The mechanistic investigation through experimental and computational study demonstrates that, compared with single-metal-based hybrids, the NiCo bimetallic hybrid exhibits stronger amine adsorption and weaker photogenerated hydrogen atom adsorption, thus promoting the dehydrogenative activation of primary amines and fast generation of imines. This work presents a promising insight for designing and preparing efficient photocatalysts to trigger organic synthesis in high yields.

From flat to deep concave: an unusual mode of facet control

Au particles with rhombic dodecahedron outlines and deep cavities are obtained by epitaxial growth from a triangular nanoplate. An unusual "wrapping" growth that combines ligand-promoted facet-selective growth and site-specific deposition is proposed. Such a templateless growth not only allows the extreme defect-tolerance, but also broadens the synthetic control at the nanoscale.

Synthesis of CoNi-layered double hydroxide on graphene oxide as adsorbent and construction of detection method for taste and odor compounds in smelling water

Taste and odor (T&O) compounds are important water pollutant, some of which are toxic. The relevant studies are all expand upon the well-known T&O compounds but for the unknown odors in smelling water. In this work, a method combining purge and trap with gas chromatograph-mass spectrometer (PT-GC/MS) and disperse solid-phase extraction with gas chromatograph (GC) was first proposed to detect T&O compounds in unknown odorous water accurately. Firstly, PT-GC/MS was used for a qualitative test on unknown odors in smelling water and determine the analytes. The hollow CoNi-layered double hydroxide (LDH) on graphene oxide (GO) was then used as a composite adsorbent to pretreat the water, in which the GO provided large specific surface, and the LDH worked as a confinement cavity to enhance capture and retention capacity for volatile organic compounds (VOCs). According to the properties of T&O compounds determined by PT-GC/MS in water, a corresponding GC method was established for accurately quantitative analysis. In this paper, five T&O compounds were detected simultaneously, including dimethyl sulfide, meistylene, N, N-dimethylbenzylamine, 2, 4-dimethylbenzaldehyde and 2, 4-di-tert-butylphenol. Extraction parameters were optimized, including ratio of desorption solvent, amount of adsorbent, pH value, etc. Under the optimal conditions, the detection limits for analysis were 1.14 μg/L to 3.07 mg/L. The satisfactory recoveries were 94-98%. Furthermore, two optimal determination outcomes of odor waters from different places support the practicability of the method, which is expected to be widely used in the detection of unknown odors in smelling water.

A Facile and General Approach to Enhance Water Resistance of Metal-Organic Frameworks by the Post-Modification with Aminopropyltriethoxylsilane

The water sensitivity of metal-organic frameworks (MOFs) as a common and crucial issue has greatly hindered their practical applications. Here, we present a facile and general approach to improve the water resistance of a typical MOF, i.e., CuBTC [Cu3(BTC)2(H2O)3]n (BTC = benzene-1,3,5-tricarboxylate) using a post-modification reaction with aminopropyltriethoxylsilane (APTES) at room temperature. The afforded material is denoted as CuBTC@APTES. Various spectroscopic methods reveal that the organosilicon linkers have been successfully grafted onto CuBTC by electrostatic attraction between acid and base groups and without affecting the original coordination mode and basic structure. Compared with CuBTC, the water stability of CuBTC@APTES was significantly improved. The pristine CuBTC almost lost all its crystallinity, morphology and pore structure after 3-day treatment in water, while CuBTC@APTES is able to retain its main crystal structure and basic porosity after the same treatment. This finding can be explained by the successful introduction of the organosilicon molecular overlayer on the periphery of CuBTC to slow down the destruction of weak metal coordination bonds by water molecules, thus improving the water stability of CuBTC. The solution of water sensitivity provides more opportunities for the practical applications of CuBTC, such as aqueous phase catalysis and gas separation in humid environments. This simple approach can certainly be expanded to improve the water resistance of other carboxylate-containing ligand-based MOFs.