Polyelemental Nanolithography via Plasma Ion Bombardment: From Fabrication to Superior H2 Sensing Application

Decorating Pd-Au Nanodots Around Porous In2O3 Nanocubes for Tolerant H2 Sensing Against Switching Response and H2S Poisoning

With the recently-booming hydrogen (H2) economy by green H2 as the energy carriers and the newly-emerged exhaled diagnosis by human organ-metabolized H2 as a biomarker, H2 sensing is simultaneously required with fast response, low detection limit, and tolerant stability against humidity, switching, and poisoning. Here, reliable H2 sensing has been developed by utilizing indium oxide nanocubes decorated with palladium and gold nanodots (Pd-Au NDs/In2O3 NCBs), which have been synthesized by combined hydrothermal reaction, annealing, and chemical bath deposition. As-prepared Pd-Au NDs/In2O3 NCBs are observed with surface-enriched NDs and nanopores. Beneficially, Pd-Au NDs/In2O3 NCBs show 300 ppb-low detection limit, 5 s-fast response to 500 ppm H2, 75%RH-high humidity tolerance, and 56 days-long stability at 280 °C. Further, Pd-Au NDs/In2O3 NCBs show excellent stability against switching sensing response, and are tolerant to H2S poisoning even being exposed to 10 ppm H2S at 280 °C. Such excellent H2 sensing may be attributed to the synergistic effect of the boosted Pd-Au NDs' spillover effect and interfacial electron transfer, increased adsorption sites over the porous NCBs' surface, and utilized Pd NDs' affinity with H2 and H2S. Practically, Pd-Au NDs/In2O3 NCBs are integrated into the H2 sensing device, which can reliably communicate with a smartphone.

Balancing Pd-H Interactions: Thiolate-Protected Palladium Nanoclusters for Robust and Rapid Hydrogen Gas Sensing

The transition toward hydrogen gas (H2) as an eco-friendly and renewable energy source necessitates advanced safety technologies, particularly robust sensors for H2 leak detection and concentration monitoring. Although palladium (Pd)-based materials are preferred for their strong H2 affinity, intense palladium-hydrogen (Pd-H) interactions lead to phase transitions to palladium hydride (PdHx), compromising sensors' durability and detection speeds after multiple uses. In response, this study introduces a high-performance H2 sensor designed from thiolate-protected Pd nanoclusters (Pd8SR16), which leverages the synergistic effect between the metal and protective ligands to form an intermediate palladium-hydrogen-sulfur (Pd-H-S) state during H2 adsorption. Striking a balance, it preserves Pd-H binding affinity while preventing excessive interaction, thus lowering the energy required for H2 desorption. The dynamic adsorption-dissociation-recombination-desorption process is efficiently and highly reversible with Pd8SR16, ensuring robust and rapid H2 sensing at parts per million (ppm). The Pd8SR16-based sensor demonstrates exceptional stability (50 cycles; 0.11% standard deviation in response), prompt response/recovery (t90 = 0.95 s/6 s), low limit of detection (LoD, 1 ppm), and ambient temperature operability, ranking it among the most sensitive Pd-based H2 sensors. Furthermore, a multifunctional prototype demonstrates the practicality of real-world gas sensing using ligand-protected metal nanoclusters.

Critical Sensing Modalities for Hydrogen: Technical Needs and Status of the Field to Support a Changing Energy Landscape

Decarbonization of the energy system is a key aspect of the energy transition. Energy storage in the form of chemical bonds has long been viewed as an optimal scheme for energy conversion. With advances in systems engineering, hydrogen has the potential to become a low cost, low emission, energy carrier. However, hydrogen is difficult to contain, it exhibits a low flammability limit (>40000 ppm or 4%), low ignition energy (0.02 mJ), and it is a short-lived climate forcer. Beyond commercially available sensors to ensure safety through spot checks in enclosed environments, new sensors are necessary to support the development of low emission infrastructure for production, transmission, storage, and end use. Efficient scalable broad area hydrogen monitoring motivates lowering the detection limit below that (10 ppm) of best in class commercial technologies. In this perspective, we evaluate recent advances in hydrogen gas sensing to highlight technologies that may find broad utility in the hydrogen sector. It is clear in the near term that a sensor technology suite is required to meet the variable constraints (e.g., power, size/weight, connectivity, cost) that characterize the breadth of the application space, ranging from industrial complexes to remote pipelines. This perspective is not intended to be another standard hydrogen sensor review, but rather provide a critical evaluation of technologies with detection limits preferably below 1 ppm and low power requirements. Given projections for rapid market growth, promising techniques will also be amenable to rapid development in technical readiness for commercial deployment. As such, methods that do not meet these requirements will not be considered in depth.

Ultrafast (∼0.6 s), Robust, and Highly Linear Hydrogen Detection up to 10% Using Fully Suspended Pure Pd Nanowire

The high explosiveness of hydrogen gas in the air necessitates prompt detection in settings where hydrogen is used. For this reason, hydrogen sensors are required to offer rapid detection and possess superior sensing characteristics in terms of measurement range, linearity, selectivity, lifetime, and environment insensitivity according to the publicized protocol. However, previous approaches have only partially achieved the standardized requirements and have been limited in their capability to develop reliable materials for spatially accessible systems. Here, an electrical hydrogen sensor with an ultrafast response (∼0.6 s) satisfying all demands for hydrogen detection is demonstrated. Tailoring structural engineering based on the reaction kinetics of hydrogen and palladium, an optimized heating architecture that thermally activates fully suspended palladium (Pd) nanowires at a uniform temperature is designed. The developed Pd nanostructure, at a designated temperature distribution, rapidly reacts with hydrogen, enabling a hysteresis-free response from 0.1% to 10% and durable characteristics in mechanical shock and repetitive operation (>10,000 cycles). Moreover, the device selectively detects hydrogen without performance degradation in humid or carbon-based interfering gas circumstances. Finally, to verify spatial accessibility, the wireless hydrogen detection system has been demonstrated, detecting and reporting hydrogen leakage in real-time within just 1 s.

Pt-Pd Nanoalloys Functionalized Mesoporous SnO2 Spheres: Tailored Synthesis, Sensing Mechanism, and Device Integration

Methane (CH4 ), as the vital energy resource and industrial chemicals, is highly flammable and explosive for concentrations above the explosive limit, triggering potential risks to personal and production safety. Therefore, exploiting smart gas sensors for real-time monitoring of CH4 becomes extremely important. Herein, the Pt-Pd nanoalloy functionalized mesoporous SnO2 microspheres (Pt-Pd/SnO2 ) were synthesized, which show uniform diameter (≈500 nm), high surface area (40.9-56.5 m2 g-1 ), and large mesopore size (8.8-15.8 nm). The highly dispersed Pt-Pd nanoalloys are confined in the mesopores of SnO2 , causing the generation ofoxygen defects and increasing the carrier concentration of sensitive materials. The representative Pt1 -Pd4 /SnO2 exhibits superior CH4 sensing performance with ultrahigh response (Ra /Rg = 21.33 to 3000 ppm), fast response/recovery speed (4/9 s), as well as outstanding stability. Spectroscopic analyses imply that such an excellent CH4 sensing process involves the fast conversion of CH4 into formic acid and CO intermediates, and finally into CO2 . Density functional theory (DFT) calculations reveal that the attractive covalent bonding interaction and rapid electron transfer between the Pt-Pd nanoalloys and SnO2 support, dramatically promote the orbital hybridization of Pd4 sites and adsorbed CH4 molecules, enhancing the catalytic activation of CH4 over the sensing layer.

Exploitation of Schottky-Junction-based Sensors for Specifically Detecting ppt-Concentration Gases

Gas species and concentrations of human-exhaled breath correlate with health, wherein disease markers contain volatile organic compounds (VOCs) of concentrations in parts per billion. It is expected that a gas-sensing strategy possesses a gas specificity and detection limit in the parts per trillion (ppt) range; however, it is still a challenge. This investigation has exploited the Schottky junction of gas sensors for detecting the reactance signal of ppt VOC, aiming for a specific and rapid detection toward disease marker acetone. In this new sensing paradigm, formed by the engineered energy band between metal-semiconductor contact, the Schottky junction is accessed to specific modulation of different adsorbate dopings and the corresponding reactance signal is measured. Regarding the detection toward ppt concentration of acetone, this sensing paradigm possesses rapid (∼100 s) and room-temperature response, molecular specificity, and 34 ppt of detection limit. The proposed detection paradigm is demonstrated to show a high feasibility toward detection of disease marker acetone.

Top-Down Approaches for 10 nm-Scale Nanochannel: Toward Exceptional H2S Detection

Metal oxide semiconductors (MOS) have proven to be most powerful sensing materials to detect hydrogen sulfide (H₂S), achieving part per billion (ppb) level sensitivity and selectivity. However, there has not been a way of extending this approach to the top-down H₂S sensor fabrication process, completely limiting their commercial-level productions. In this study, we developed a top-down lithographic process of a 10 nm-scale SnO₂ nanochannel for H₂S sensor production. Due to high-resolution (15 nm thickness) and high aspect ratio (>20) structures, the nanochannel exhibited highly sensitive H₂S detection performances (R_a/R_g = 116.62, τ_res = 31 s at 0.5 ppm) with selectivity (R_H2S/R_acetone = 23 against 5 ppm acetone). In addition, we demonstrated that the nanochannel could be efficiently sensitized with the p-n heterojunction without any postmodification or an additional process during one-step lithography. As an example, we demonstrated that the H₂S sensor performance can be drastically enhanced with the NiO nanoheterojunction (R_a/R_g = 166.2, τ_res = 21 s at 0.5 ppm), showing the highest range of sensitivity demonstrated to date for state-of-the-art H₂S sensors. These results in total constitute a high-throughput fabrication platform to commercialize the H₂S sensor that can accelerate the development time and interface in real-life situations.

Printing Technologies as an Emerging Approach in Gas Sensors: Survey of Literature

Herein, we review printing technologies which are commonly approbated at recent time in the course of fabricating gas sensors and multisensor arrays, mainly of chemiresistive type. The most important characteristics of the receptor materials, which need to be addressed in order to achieve a high efficiency of chemisensor devices, are considered. The printing technologies are comparatively analyzed with regard to, (i) the rheological properties of the employed inks representing both reagent solutions or organometallic precursors and disperse systems, (ii) the printing speed and resolution, and (iii) the thickness of the formed coatings to highlight benefits and drawbacks of the methods. Particular attention is given to protocols suitable for manufacturing single miniature devices with unique characteristics under a large-scale production of gas sensors where the receptor materials could be rather quickly tuned to modify their geometry and morphology. We address the most convenient approaches to the rapid printing single-crystal multisensor arrays at lab-on-chip paradigm with sufficiently high resolution, employing receptor layers with various chemical composition which could replace in nearest future the single-sensor units for advancing a selectivity.

In Situ TEM Technique Revealing the Deactivation Mechanism of Bimetallic Pd-Ag Nanoparticles in Hydrogen Sensors

Bimetallic Pd-Ag alloy nanoparticles exhibit satisfactory H₂-sensing improvements and show application potential for H₂ sensor construction. However, the long-term stability of the H₂ sensor with Pd-Ag nanoparticles as the catalyst is found to dramatically decrease during operation. Herein, gas-cell in situ transmission electron microscopy (TEM) is used to investigate the failure mechanisms of Pd-Ag nanoparticles under operation conditions. Based on the in situ TEM results, the Pd-Ag nanoparticles have two failure mechanisms: particles coalescence at 300 °C and phase segregation at 500 °C. Guided by the failure mechanisms, the H₂ sensor is comprehensively optimized based on the working temperature and the amount of Pd-Ag alloy nanoparticles. The optimized sensor exhibits satisfactory H₂-sensing properties, and the response decline of the sensor after 1 month is negligible. The revealing of the failure mechanisms with in situ TEM technology provides a valuable route for developing gas sensors with high long-term stability.

Controllable Fabrication of PdO-PdAu Ternary Hollow Shells: Synergistic Acceleration of H2 -Sensing Speed via Morphology Regulation and Electronic Structure Modulation

Designing ultrafast H₂ sensors is of particular importance for practical applications of hydrogen energy but still quite challenging. Herein, PdO decorated PdAu ternary hollow shells (PdO-PdAu HSs) exhibiting an ultrafast response of ≈0.9 s to 1% H₂ in air at room temperature are presented. PdO-PdAu HSs are fabricated by calcinating PdAu bimetallic HSs in air to form PdO-Au binary HSs, which are then partially reduced by NaBH₄ solution, forming PdO-PdAu HSs. This ternary hybrid material takes advantage of multiple aspects to synergistically accelerate the sensing speed. The HS morphology promises high gas accessibility and high surface area for H₂ adsorption, and decoration of Au and PdO alters the electronic state of Pd and reduces the energy barrier for hydrogen diffusing from the surface site of Pd into the subsurface site. The content of Au and PdO in the ternary HSs can be simply tuned, which offers the possibility to optimize their promotion effects to reach the best performance. The proposed fabrication strategy sheds light on the rational design of ultrafast Pd-based H₂ sensors by controlling the sensor structure and engineering the electronic state of active species.

Boosting Mass Exchange between Pd/NC and MoC/NC Dual Junctions via Electron Exchange for Cascade CO2 Fixation

Merging existing catalysts together as a cascade catalyst may achieve "one-pot" synthesis of complex but functional molecules by simplifying multistep reactions, which is the blueprint of sustainable chemistry with low pollutant emission and consumption of energy and materials only when the smooth mass exchange between different catalysts is ensured. Effective strategies to facilitate the mass exchange between different active centers, which may dominate the final activity of various cascade catalysts, have not been reached until now, even though charged interfaces due to work function driven electron exchange have been widely observed. Here, we successfully constructed mass (reactants and intermediates) exchange paths between Pd/N-doped carbon and MoC/N-doped carbon induced by interfacial electron exchange to trigger the mild and cascade methylation of amines using CO₂ and H₂. Theoretical and experimental results have demonstrated that the mass exchange between electron-rich MoC and electron-deficient Pd could prominently improve the production of N,N-dimethyl tertiary amine, which results in a remarkably high turnover frequency value under mild conditions, outperforming the state-of-the-art catalysts in the literature by a factor of 5.9.

Effect of Highly Periodic Au Nanopatterns on Dendrite Suppression in Lithium Metal Batteries

Despite the extremely high energy density of the lithium metal, dendritic lithium growth caused by nonuniform lithium deposition can result in low Coulombic efficiency and safety hazards, thereby inhibiting its practical applications. Here, we report a new strategy for adopting a nanopatterned gold (Au) seed on a copper current collector for uniform lithium deposition. We find that Au nanopatterns enhance lithium metal battery performance, which is strongly affected by the feature dimensions of Au nanopatterns (diameter and height). Ex situ scanning electron microscopy images confirm that this can be attributed to the perfectly selective lithium nucleation and uniform growth resulting from the spatial confinement effect. The spatial arrangement of Au dot seeds homogenizes the Li⁺ flux and electric field, and the size-controlled Au seeds prevent both seed-/substrate-induced agglomeration and interseed-induced lithium growth, leading to uniform lithium deposition. This dendrite-free lithium deposition results in the improvement of electrochemical performance, and the system showed cyclic stability over 300 cycles at 0.5 mA cm^-2 and 200 cycles at 1.0 mA cm^-2 (1 mA h cm^-2) and a high rate capability. This study provides in-depth insights into the more complicated and diverse seed geometry control of seed materials for the development of high-performance lithium metal batteries.

High-Sensitive MEMS Hydrogen Sulfide Sensor made from PdRh Bimetal Hollow Nanoframe Decorated Metal Oxides and Sensitization Mechanism Study

Here we report the fabrication of a high performance metal oxide semiconductor (MOS) sensor for the detection of hydrogen sulfide (H₂S) using PdRh bimetal hollow nanocube (HC) with Rh-rich hollow frame and Pd-rich core frame as sensitizing materials. PdRh bimetal HC with the edge-length about 10 nm was prepared by chemical etching PdRh bimetal solid nanocube (SC) in HNO₃ aqueous solution. The results of gas-sensing tests indicate that the response value order of the MEMS gas sensors based on MOSs (including ZnO, MoO₃ and SnO₂) is as follows: R_PdRh HC/MOS > R_PdRh SC/MOS > R_MOS. First, in the system of ZnO, gas sensor modified by PdRh (PdRh SC/ZnO and PdRh HC/ZnO) possess enhanced H₂S sensing performance with a better response and excellent low-concentration detection capability (down to 15 ppb) comparing to pure ZnO. The improved H₂S sensing performance could be attributed to the good conductivity of Rh-rich frame, the high catalytic activity of PdRh bimetal and formation of Schottky barrier-type junctions and defect. Second, PdRh HC/ZnO sensor shows better response (185-1 ppm of H₂S) compared to PdRh SC/ZnO sensor (108-1 ppm of H₂S), which is due to the higher specific surface area of PdRh HC/ZnO and good gas diffusion of the hollow structure. This work indicate that the sensitization characteristics of PdRh bimetal HC will provide new paradigms for the future development of the high performance sensor.

Chemiresistive Hydrogen Sensors: Fundamentals, Recent Advances, and Challenges

Hydrogen (H₂) is one of the next-generation energy sources because it is abundant in nature and has a high combustion efficiency that produces environmentally benign products (H₂O). However, H₂/air mixtures are explosive at H₂ concentrations above 4%, thus any leakage of H₂ must be rapidly and reliably detected at much lower concentrations to ensure safety. Among the various types of H₂ sensors, chemiresistive sensors are one of the most promising sensing systems due to their simplicity and low cost. This review highlights the advances in H₂ chemiresistors, including metal-, semiconducting metal oxide-, carbon-based materials, and other materials. The underlying sensing mechanisms for different types of materials are discussed, and the correlation of sensing performances with nanostructures, surface chemistry, and electronic properties is presented. In addition, the discussion of each material emphasizes key advances and strategies to develop superior H₂ sensors. Furthermore, recent key advances in other types of H₂ sensors are briefly discussed. Finally, the review concludes with a brief outlook, perspective, and future directions.

Recent Progress in Simple and Cost-Effective Top-Down Lithography for ≈10 nm Scale Nanopatterns: From Edge Lithography to Secondary Sputtering Lithography

The development of a simple and cost-effective method for fabricating ≈10 nm scale nanopatterns over large areas is an important issue, owing to the performance enhancement such patterning brings to various applications including sensors, semiconductors, and flexible transparent electrodes. Although nanoimprinting, extreme ultraviolet, electron beams, and scanning probe litho-graphy are candidates for developing such nanopatterns, they are limited to complicated procedures with low throughput and high startup cost, which are difficult to use in various academic and industry fields. Recently, several easy and cost-effective lithographic approaches have been reported to produce ≈10 nm scale patterns without defects over large areas. This includes a method of reducing the size using the narrow edge of a pattern, which has been attracting attention for the past several decades. More recently, secondary sputtering lithography using an ion-bombardment technique was reported as a new method to create high-resolution and high-aspect-ratio structures. Recent progress in simple and cost-effective top-down lithography for ≈10 nm scale nanopatterns via edge and secondary sputtering techniques is reviewed. The principles, technical advances, and applications are demonstrated. Finally, the future direction of edge and secondary sputtering lithography research toward issues to be resolved to broaden applications is discussed.

Hydrogen Sensors Based on MoS2 Hollow Architectures Assembled by Pickering Emulsion

For rapid hydrogen gas (H₂) sensing, we propose the facile synthesis of the hollow structure of Pt-decorated molybdenum disulfide (h-MoS₂/Pt) using ultrathin (mono- or few-layer) two-dimensional nanosheets. The controlled amphiphilic nature of MoS₂ surface produces ultrathin MoS₂ NS-covered polystyrene particles via one-step Pickering emulsification. The incorporation of Pt nanoparticles (NPs) on the MoS₂, followed by pyrolysis, generates the highly porous h-MoS₂/Pt. This hollow hybrid structure produces sufficiently permeable pathways for H₂ and maximizes the active sites of MoS₂, while the Pt NPs on the hollow MoS₂ induce catalytic H₂ spillover during H₂ sensing. The h-MoS₂/Pt-based chemiresistors show sensitive H₂ sensing performances with fast sensing speed (response, 8.1 s for 1% of H₂ and 2.7 s for 4%; and recovery, 16.0 s for both 1% and 4% H₂ at room temperature in the air). These results mark the highest H₂ sensing speed among 2D material-based H₂ sensors operated at room temperature in air. Our fabrication method of h-MoS₂/Pt structure through Pickering emulsion provides a versatile platform applicable to various 2D material-based hollow structures and facilitates their use in other applications involving surface reactions.

Coulomb Blockade Effect in Well-Arranged 2D Arrays of Palladium Nano-Islands for Hydrogen Detection at Room Temperature: A Modeling Study

The fast growth of hydrogen usage as a clean fuel in civil applications such as transportation, space technology, etc. highlights the importance of the reliable detection of its leakage and accumulation under explosion limit by sensors with a low power consumption at times when there is no accumulation of hydrogen in the environment. In this research, a new and efficient mechanism is presented for hydrogen detection-using the Coulomb blockade effect in a well-arranged 2D array of palladium nano-islands-which can operate at room temperature. We demonstrated that under certain conditions of size distribution and the regularity of palladium nano-islands, with selected sizes of 1.7, 3 and 6.1 nm, the blockade threshold will appear in current-voltage (IV) characteristics. In reality, it will be achieved by the inherent uncertainty in the size of the islands in nano-scale fabrication or by controlling the size of nanoparticles from 1.7 to 6.1 nm, considering a regular arrangement of nanoparticles that satisfies single-electron tunneling requirements. Based on the simulation results, the threshold voltage is shifted towards lower ones due to the expansion of Pd nanoparticles exposed to the environment with hydrogen concentrations lower than 2.6%. Also, exploring the features of the presented structure as a gas sensor, provides robustness against the Gaussian variation in nano-islands sizes and temperature variations. Remarkably, the existence of the threshold voltage in the IV curve and adjusting the bias voltage below this threshold leads to a drastic reduction in power consumption. There is also an improvement in the minimum detectable hydrogen concentration as well as the sensor response.

A Colorimetric Artificial Olfactory System for Airborne Improvised Explosive Identification

The detection of ultralow or nonvolatile target analytes remains a significant challenge for artificial olfactory systems even after decades of development, which severely limits their widespread application. To overcome this challenge, an artificial olfactory system based on a colorimetric hydrogel array is constructed for the first time as a universal representative. As an effective extension of conventional artificial olfactory systems that integrates the merits of its predecessors, the proposed system accurately mimics olfactory mucosa and specific odorant binding proteins using hydrogels endowed with specific colorimetric reagents for the detection of hypochlorite, chlorate, perchlorate, urea, and nitrate. Therefore, the proposed system is capable of detecting and discriminating between these five airborne improvised explosive microparticulates with a detection limit as low as 39.4 pg. Additionally, the system demonstrates good reusability over ten cycles, rapid response time of ≈0.2 s, and excellent discrimination properties, despite significant variation. This proof-of-concept study on colorimetric artificial olfactory systems yields a novel strategy for the direct and discriminative detection of nonvolatile airborne microparticulates.

New Alternating Current Noise Analytics Enables High Discrimination in Gas Sensing

Feature analysis has been increasingly considered as an important way to enhance the discrimination performance of gas sensors. In this work, a new analytical method based on alternating current noise spectrum is developed to discriminate chemically and structurally similar gases with remarkable performance. Compared with the conventional analytics based on the maximum, integral, and time of response, the noise spectrum of electrical response introduces a new informative feature to discriminate chemical gases. In experiment, three chemically and structurally similar gases, mesitylene, toluene, and o-xylene, are tested on ZnO thin film gas sensors. The result indicated that the noise analytics assisted by the support vector machine algorithm discriminated these similar gases with 94.2% in precision, about 20% higher than those obtained by conventional methods. Such a new alternating current noise analytics is very promising for application in sensors for high discrimination precision.

Rational Design of Multisite Trielement Ru-Ni-Fe Alloy Nanocatalysts with Efficient and Durable Catalytic Hydrogenation Performances

The co-decomposition of non-noble metals into Ru nanoparticles (NPs) would provide multiple active centers as well as synergistically alter the reaction pathway, enhancing the catalytic hydrogenation performance. Herein, a facile route for synthesizing trielement Ru-Ni-Fe alloy NPs was proposed. The catalytic hydrogenation performance of NPs was measured using p-nitrophenol as a model. The synergistic effect of these three elements (Ru, Ni, and Fe) and synergistic catalysis of multiple crystal faces greatly improved the catalytic hydrogenation performance of Ru₄₄Ni₂₈Fe₂₈ alloy NPs. Ru with more vacant orbitals showed a strong coordination with BH₄^- for the generation of active H species. Ni played a major role in transporting electrons and active H species, increasing the accessibility of catalytically active sites. Fe could cooperate with BH₄^- to produce active H species and promote electrons transfer. Ru₄₄Ni₂₈Fe₂₈ alloy NPs could be reused and applied for the fabrication of films at the oil-water (ethyl acetate-water) interface. The densely packed Ru₄₄Ni₂₈Fe₂₈ NP films were good Raman substrates for monitoring the complete conversion of 4-nitrothiophenol into 4-aminothiophenol. The rational design of Ru₄₄Ni₂₈Fe₂₈ will broaden the application range of Ru-based catalysts and provide new insights into the rational design of other multisite alloy catalysts.

High-Resolution, Fast, and Shape-Conformable Hydrogen Sensor Platform: Polymer Nanofiber Yarn Coupled with Nanograined Pd@Pt

We report a flexible hydrogen sensing platform based on a single-strand yarn consisting of high-density electrospun nanofibers, on which nanograined Pd or Pd@Pt is coated via yarn spinning followed by sputter deposition. In general, Pd undergoes a phase transition to PdH _x (α-PdH _x at [H₂] < 1% and β-PdH _x at [H₂] > 2%), in which H atoms act as electron scattering centers, thus increasing the resistance. In our system, the sensors exhibit switchable H₂ sensing behaviors, that is, (i) Δ R/ R₀ > 0 at [H₂] > 1% by the active electron scattering and (ii) Δ R/ R₀ < 0 at [H₂] < 1% derived from nanograined Pd effects. Due to high mechanical stability stemming from nanogranular morphologies of Pd, which is essential for enduring a huge volume expansion upon exposure to high-concentration H₂, we could obtain a wide concentration range (4-0.0001%) H₂ detection resolution. Moreover, an ultrathin Pt overlayer coated on Pd offers an accelerated H₂ detection capability based on effective gas dissociation and activation properties. Furthermore, by virtue of the core (thread)-shell (nanofiber yarn) scaffold, long cycling reliability and flexibility were achieved. This facile and low-cost yarn fabrication method offers the development of single-strand thread-type wearable chemiresistors that possess a high surface area and open porosity, facilitating gas diffusion and reaction.