Freestanding Borophene and Its Hybrids

Borophene: a piezocatalyst for water remediation

Borophene is an emerging two-dimensional material exhibiting exceptional piezocatalytic activity under the influence of ultrasonic vibrations, as exemplified herein by the decomposition of highly stable organic dyes in water. After 6 minutes of exposure, borophene sheets converted up to 92 percent of a mixture of dye molecules at room temperature.

Chiral Induction in 2D Borophene Nanoplatelets through Stereoselective Boron-Sulfur Conjugation

Chirality is a structural metric that connects biological and abiological forms of matter. Although much progress has been made in understanding the chemistry and physics of chiral inorganic nanoparticles over the past decade, almost nothing is known about chiral two-dimensional (2D) borophene nanoplatelets and their influence on complex biological networks. Borophene's polymorphic nature, derived from the bonding configurations among boron atoms, distinguishes it from other 2D materials and allows for further customization of its material properties. In this study, we describe a synthetic methodology for producing chiral 2D borophene nanoplatelets applicable to a variety of structural polymorphs. Using this methodology, we demonstrate feasibility of top-down synthesis of chiral χ3 and β12 phases of borophene nanoplatelets via interaction with chiral amino acids. The chiral nanoplatelets were physicochemically characterized extensively by various techniques. Results indicated that the thiol presenting amino acids, i.e., cysteine, coordinates with borophene in a site-selective manner, depending on its handedness through boron-sulfur conjugation. The observation has been validated by circular dichroism, X-ray photoelectron spectroscopy, and 11B NMR studies. To understand how chiral nanoplatelets interact with biological systems, mammalian cell lines were exposed to them. Results showed that the achiral as well as the left- and right-handed biomimetic χ3 and β12 borophene nanoplatelets have distinct interaction with the cellular membrane, and their internalization pathway differs with their chirality. By engineering optical, physical, and chemical properties, these chiral 2D nanomaterials could be applied successfully to tuning complex biological events and find applications in photonics, sensing, catalysis, and biomedicine.

Boron Quantum Dots Pillared Ti3 C2 Tx Membrane Electrode with High Rate Performance for Supercapacitor

A sonication-assisted liquid-phase preparation technique is developed to prepare boron quantum dots (BQDs) with a lateral size of 3 nm in a solution of NMP and NBA; it shows a direct bandgap semiconductor with a bandgap of 3 eV and a specific capacitance of 41 F g-1 . A BQDs(10)-Ti3 C2 Tx membrane electrode with excellent capacitance and high flexibility is prepared by using Ti3 C2 Tx nanosheets (NSs) as assembled units and BQDs as pillar; it gives a specific capacitance of 524 F g-1 at 1 A g-1 in 6 m H2 SO4 electrolyte, a high capacity retention of 75%, and a minimum relaxation time of 0.51 s. An all-solid-state BQDs(10)-Ti3 C2 Tx flexibility supercapacitor is assembled by using a BQDs(10)-Ti3 C2 Tx membrane as electrodes and PVA/H2 SO4 hydrogel as electrolyte; it not only shows an area specific capacitance of 552 mF cm-2 at 1.25 mA cm-2 , a retention rate of 75%, a capacity retention of 93% after 5000 cycles, and an energy density of 40.4 Wh cm-3 at a volume power density of 416 W cm-3 , but also provides superior flexibility and can be bent to different degrees, showing that the assembled BQDs(10)-Ti3 C2 Tx membrane electrode and BQDs(10)-Ti3 C2 Tx flexible supercapacitor display broad application prospects in field of portable/wearable electronic devices.

Hydrogenation driven ultra-low lattice thermal conductivity inβ12borophene

Borophene gathered large interest owing to its polymorphism and intriguing properties such as Dirac point, inherent metallicity, etc but oxidation limits its capabilities. Hydrogenated borophene was recently synthesised experimentally to harness its applications. Motivated by experimental work, in this paper, using first-principles calculations and Boltzmann transport theory, we study the freestandingβ12borophene nanosheet doped and functionalised with hydrogen (H), lithium (Li), beryllium (Be), and carbon (C) atoms at differentβ12lattice sites. Among all possible configurations, we screen two stable candidates, pristine and hydrogenatedβ12borophene nanosheets. Both nanosheets possess dynamic and mechanical stability while the hydrogenated sheet has different anisotropic metallicity compared to pristine sheet leading to enhancement in brittle behaviour. Electronic structure calculations reveal that both nanosheets host Dirac cones (DCs), while hydrogenation leads to shift and enhancement in tilt of the DCs. Further hydrogenation leads to the appearance of additional Fermi pockets in the Fermi surface. Transport calculations reveals that the lattice thermal conductivity changes from 12.51 to 0.22 W m-1 K-1(along armchair direction) and from 4.42 to 0.07 W m-1 K-1(along zigzag direction) upon hydrogenation at room temperature (300 K), demonstrating a large reduction by two orders of magnitude. Such reduction is mainly attributed to decreased phonon mean free path and relaxation time along with the enhanced phonon scattering rates stemming from high frequency phonon flat modes in hydrogenated nanosheet. Comparatively larger weighted phase space leads to increased anharmonic scattering in hydrogenated nanosheet contributing to ultra-low lattice thermal conductivity. Consequently, hydrogenatedβ12nanosheet exhibits a comparatively higher thermoelectric figure of merit (∼0.75) at room temperature along armchair direction. Our study demonstrates the effects of functionalisation on transport properties of freestandingβ12borophene nanosheets which can be utilised to enhance the thermoelectric performance in two-dimensional (2D) systems and expand the applications of boron-based 2D materials.

Photoenhanced intrinsic peroxidase-like activity of a metal-free biocompatible borophene photonanozyme for colorimetric sensor assay of dopamine biomolecule

Photonanozymes are novel enzyme-mimicking nanomaterials with light-harvesting capacity and have widespread applications in many areas including biosensing, biomedicine, environmental applications, energy, etc. Herein, we introduce freestanding metal-free biocompitable borophene nanosheets (BNSs) exhibiting excellent photoresponsive peroxidase-like activity for biosensing applications. The photo-enhanced peroxidase-like activity of BNSs photonanozyme was indicated to be due to its band gap energy being comparable to the energy of visible light.

Selective Interfacial Excited-State Carrier Dynamics and Efficient Charge Separation in Borophene-Based Heterostructures

Borophene-based van der Waals heterostructures have demonstrated enormous potential in the realm of optoelectronic and photovoltaic devices, which has sparked a wide range of interest. However, a thorough understanding of the microscopic excited-state electronic dynamics at interfaces is lacking, which is essential for determining the macroscopic optoelectronic and photovoltaic performance of borophene-based devices. In this study, photoexcited carrier dynamics of β12 , χ3 , and α΄ borophene/MoS2 heterostructures are systematically studied based on time-domain nonadiabatic molecular dynamics simulations. Different Schottky contacts are found in borophene/semiconductor heterostructures. The interplay between Schottky barriers, electronic coupling, and the involvement of different phonon modes collectively contribute to the unique carrier dynamics in borophene-based heterostructures. The diverse borophene allotropes within the heterostructures exhibit distinct and selective carrier transfer behaviors on an ultrafast timescale: electrons tunnel into α΄ borophene with an ultrafast transfer rate (≈29 fs) in α΄/MoS2 heterostructures, whereas β12 borophene only allows holes to migrate with a lifetime of 176 fs. The feature enables efficient charge separation and offers promising avenues for applications in optoelectronic and photovoltaic devices. This study provides insight into the interfacial carrier dynamics in borophene-based heterostructures, which is helpful in further design of advanced 2D boron-based optoelectronic and photovoltaic devices.

Liquid-Liquid Interface-Assisted Self-Assembly of Ag-Doped ZnO Nanosheets for Atomic Switch Application

Developing facile and inexpensive methods for obtaining large-area two-dimensional semiconducting nanosheets is highly desirable for mass-scale device application. Here, we report a method for producing uniform and large-area films of a Ag-doped ZnO (AZO) nanosheet network via self-assembly at the hexane-water interface by controlling the solute/solvent ratio. The self-assembled film comprises of uniformly tiled nanosheets with size ∼1 μm and thicknesses∼60-100 nm. Using these films in a Pt/AZO/Ag structure, an atomic switch operation is realized. The switching mechanism is found to be governed by electrochemical metallization with nucleation as the rate-limiting step. Our results establish the protocol for large-scale device applications of AZO nanosheets for exploring advanced atomic switch-based neuromorphic systems.

Sonochemically synthesized hydride-stabilized boron nanosheets via radical-assisted oxidative exfoliation for energy storage applications

Metal-free hydride stabilized boron nanosheets (H-BNS) were prepared in an aqueous medium without using noble metal growth substrates via sonochemistry. The reducing ability of H-BNS was demonstrated with Au3+(aq) reduction, and its layered morphology is exploited for Li-ion battery (LIB) applications.

Recent advances and promise of MXene-based composites as electrode materials for sodium-ion and potassium-ion batteries

With the increasing demand for sustainable energy and concerns about the scarcity of lithium resources, sodium and potassium ion batteries have emerged as promising alternative energy storage technologies. MXene, as a novel two-dimensional material, possesses exceptional electrical conductivity, high surface area, and tunable structural features that make it an ideal candidate for high-performance electrode materials. However, its limited theoretical capacity hinders its widespread application. To overcome this limitation, MXene has been combined with other materials through synergistic effects between different components to enhance the overall electrochemical performance and expand its application in sodium/potassium ion batteries. Recently, substantial advancements have been realized in the exploration of MXene-based composites as energy storage materials, encompassing their synthesis, design, and the comprehension of charge storage mechanisms. This paper aims to propose a comprehensive summary of the latest developments in MXene-based composites as electrode materials for sodium ion batteries and potassium ion batteries, with a particular emphasis on the enhanced physicochemical properties resulting from composite formation. Moreover, the challenges faced by MXene materials in sodium ion batteries and potassium ion batteries are thoroughly discussed, and future research directions to further advance this field are proposed.

Prediction of a planar BxP monolayer with inherent metallicity and its potential as an anode material for Na and K-ion batteries: a first-principles study

Borophene, the lightest two-dimensional material, exhibits exceptional storage capacity as an anode material for sodium-ion batteries (NIBs) and potassium-ion batteries (PIBs). However, the pronounced surface activity gives rise to strong interfacial bonding between borophene and the metal substrate it grows on. Incorporation of heterogeneous atoms capable of forming strong bonds with boron to increase borophene stability while preserving its intrinsic metallic conductivity and high theoretical capacity remains a great challenge. In this study, a particle swarm optimization (PSO) method was employed to determine several new two-dimensional monolayer boron phosphides (BxP, x = 3-6) with rich boron components. The obtained BxP has great potential to be used as an anode material for sodium-ion batteries/potassium-ion batteries (SIBs/PIBs), according to DFT calculations. BxP demonstrates remarkable stability compared with borophene which ensures their feasibility of experimental synthesis. Moreover, B5P and B6P exhibit high electronic conductivity and ionic conductivity, with migration energy barriers of 0.20 and 0.21 eV for Na ions and 0.07 eV for K ions. Moreover, the average open circuit voltage falls within a favorable range of 0.25-0.73 V, which results in a high storage capacity of 1119-2103 mA h g-1 for SIBs and 631-839 mA h g-1 for PIBs. This study paves the way for exploring boron-rich 2D electrode materials for energy applications and provides valuable insights into the functionalization and stabilization of borophene.

Carrier mobility of two-dimensional Dirac materials: the influence of optical phonon scattering

We developed an analytical formula to calculate the influence of optical phonons on the mobility of two-dimensional Dirac materials at arbitrary temperature and arbitrary doping concentration. The method was combined with first-principles calculations to show that the effect of optical phonons on mobility is not negligible for typical Dirac materials such as graphene even though the occupation number of optical phonons is relatively small. Unlike the treatment of electron-acoustic phonon coupling, the energy change of electrons in the scattering process with optical phonons is crucial, which leads to a non-power temperature dependence of mobility under weak doping. The formalism was applied to calculate and analyze the mobility of two well-known Dirac materials, α-graphyne and the VCl3 monolayer, which differs by one to two orders of magnitude.

Novel Piezoelectricity in Two-Dimensional Metallic/Semimetallic Materials with Out-of-Plane Polarization

Normally, the good conductivity of metals and semimetals is incompatible with the piezoelectricity since the internal electric current will dismiss any polarization. However, here, we reveal that the out-of-plane piezoelectric effect can exist in two-dimensional (2D) metallic/semimetallic materials due to their giant anisotropy. A method is developed to calculate the out-of-plane polarization in 2D systems, where the modern theory of polarization based on a Berry-phase approach is not applicable. Detailed calculation and analysis on a Dirac material, the FeB2 monolayer, show that it has an out-of-plane polarization of 8.3 pC/m and the piezoelectric coefficient of e31 = -59.3 pC/m and d31 = -0.25 pm/V. This work provides a formalism to discover more piezoelectric materials within the vast 2D metallic/semimetallic materials.

In vivo study on borophene nanoflakes interaction with Tenebrio molitor beetle: viability of hemocytes and short-term immunity effect

The family of graphene-based materials welcomed a new member, borophene, in 2014. Research on synthesis routes and experimental study on physicochemical and biological (especially in vivo) properties still is strongly desired in order to evaluate its practical potential as a drug delivery-system. The effect of two-dimensional borophene nanoflakes on cells, systems and the entire animal organism has not been studied so far. Therefore, we investigated in vivo its biocompatibility with hemocytes in the Tenebrio molitor as a model organism. Short-term studies demonstrated that borophene nanoflakes at doses of 0.5, 1 or 2 µg of nanoflakes per insect did not induce hemocytotoxicity. Hemocytes exposed to nanoflakes showed morphology, adhesiveness and ability to form filopodia as in the control hemocytes. A detailed study indicates that borophene nanoflakes do not: (i) generate intracellular reactive oxygen species in hemocytes, (ii) affect the mitochondrial membrane potential and (iii) interfere with phagocytosis. Therefore, this contribution presents new in vivo insights into the group of two-dimensional materials which are one of the most promising materials for biomedical applications owing to their special structure and unique properties. However, long-term studies in insects and other animals are still necessary to confirm that borophene is biocompatible and biologically safe.

Facile Synthesis of Oxidized Boron Nanosheets for Chemo- and Biosensing

As recently emerging nanomaterials, boron nanosheets (BNSs) have attracted more and more attention in various fields such as supercapacitors, photodetectors, bioimaging, and electrocatalysis due to their advantages of good biological compatibility, environmental friendliness, and good electro-optical properties. However, the study and application of BNSs in chemical and biological sensing are still in the infant stage, mainly due to the requirement of complicated, high-cost, and time-consuming preparation strategies. In this work, a new class of BNSs, namely oxidized-BNSs (i.e., ox-BNSs), were easily and rapidly synthesized by chemically treating boron powder with diluted HNO₃ in a very short time (less than 15 min). The composition, morphology, optical property, and peroxidase mimetic activity of obtained ox-BNSs were investigated in detail. The prepared ox-BNSs were several-layered nanosheets with abundant oxygen-containing groups, emitted blue fluorescence, and possessed good intrinsic peroxidase mimetic activity, based on which a sensitive and selective colorimetric sensor was developed for detection of H₂O₂ and glucose. The new easy preparation strategy and good sensing performances of the prepared ox-BNSs would greatly stimulate the study and application of BNSs in chemo- and biosensing.

Dynamically Adjusting Borophene-Based Plasmon-Induced Transparency in a Polymer-Separated Hybrid System for Broadband-Tunable Sensing

Borophene, an emerging two-dimensional (2D) material platform, is capable of supporting highly confined plasmonic modes in the visible and near-infrared wavebands. This provides a novel building block for light manipulation at the deep subwavelength scale, thus making it well-suited for designing ultracompact optical devices. Here, we theoretically explore a borophene-based plasmonic hybrid system comprising a continuous borophene monolayer (CBM) and sodium nanostrip gratings (SNGs), separated by a polymer spacer layer. In such a structure, a dynamically tunable plasmon-induced transparency (PIT) effect can be achieved by strongly coupling dark and bright plasmonic modes, while actively controlling borophene. Here, the bright mode is generated through the localized plasmon resonance of SNGs when directly excited by TM-polarized incident light. Meanwhile, the dark mode corresponds to a propagating borophene surface plasmon (BSP) mode in the CBM waveguide, which cannot be directly excited, but requires phase matching with the assistance of SNGs. The thickness of the polymer layer has a significant impact on the coupling strength of the two modes. Owing to the BSP mode, highly sensitive to variations in the ambient refractive index (RI), this borophene-based hybrid system exhibits a good RI-sensing performance (643.8 nm/RIU) associated with a wide range of dynamically adjustable wavebands (1420-2150 nm) by tuning the electron density of borophene. This work offers a novel concept for designing active plasmonic sensors dependent on electrically gating borophene, which has promising applications in next-generation point-of-care (PoC) biomedical diagnostic techniques.

Ball milling induced borophene flakes fabrication

To fill the knowledge gap for borophene, as the youngest member of the two-dimensional (2D) nanomaterials family, a facile, cost effective, scalable and reproducible fabrication route is still strongly required. Among so far studied techniques the potential of pure mechanical processes such as ball milling is not explored yet. Therefore, in this contribution, we explore the efficiency to exfoliate bulk boron into a few-layered borophene induced by mechanical energy in the planetary ball mill. It was revealed that the resulting flakes thickness and distribution can be controlled by (i) rotation speed (250-650 rpm), (ii) time of ball-milling (1-12 hours), and mass loading of bulk boron (1-3 g). Furthermore, the optimal conditions for the ball-milling process to induce efficient mechanical exfoliation of boron were determined to be 450 rpm, 6 hours, and 1 g (450 rpm_6 h_1 g), which resulted in the fabrication of regular and thin few-layered borophene flakes (∼5.5 nm). What is more, the mechanical energy induced during ball-milling, and the heat generated inside, affected the structure of borophene resulting in different crystalline phases. Besides being an additional and interesting discovery, it will also open up opportunities to investigate the relevance between the properties and the emerging phase. Structures labeled as β-rhombohedral, γ-orthorhombic, τ-B and the conditions under which they appear, have been described. Therefore, in our study, we open a new door to obtain a bulk quantity of few-layered borophene for further fundamental studies and practical potential assessment.

Borophene Embedded Cellulose Paper for Enhanced Photothermal Water Evaporation and Prompt Bacterial Killing

Solar-driven photothermal water evaporation is considered an elegant and sustainable technology for freshwater production. The existing systems, however, often suffer from poor stability and biofouling issues, which severely hamper their prospects in practical applications. Conventionally, photothermal materials are deposited on the membrane supports via vacuum-assisted filtration or dip-coating methods. Nevertheless, the weak inherent material-membrane interactions frequently lead to poor durability, and the photothermal material layer can be easily peeled off from the hosting substrates or partially dissolved when immersed in water. In the present article, the discovery of the incorporation of borophene into cellulose nanofibers (CNF), enabling excellent environmental stability with a high light-to-heat conversion efficiency of 91.5% and water evaporation rate of 1.45 kg m^-2 h^-1 under simulated sunlight is reported. It is also demonstrated that borophene papers can be employed as an excellent active photothermal material for eliminating almost 100% of both gram-positive and gram-negative bacteria within 20 min under three sun irradiations. The result opens a new direction for the design of borophene-based papers with unique photothermal properties which can be used for the effective treatment of a wide range of wastewaters.

Bifunctional Photoassisted Li-O2 Battery with Ultrahigh Rate-Cycling Performance Based on Siloxene Size Regulation

Directly integrating the bifunctional photoelectrode into Li-O2 batteries has been considered an effective way to reduce the overpotential and promote electric energy saving. However, more regular investigations on various bifunctional photocatalysts have still been desired for high-performance photoassisted Li-O2 batteries. Herein, a systematic exploration of various-sized siloxene photocatalysts affected by Li-O2 batteries has been introduced. Compared with the utilization of larger-sized siloxene nanosheets (SNSs), the photoassisted Li-O2 battery with a siloxene quantum dot (SQD) photoelectrode delivers a superior round-trip efficiency of 230% based on the highest discharge potential up to 3.72 V and lowest charge potential of 1.60 V and enables the maintenance of a long-term cycling life with only 13% efficiency attenuation after 200 cycles at 0.075 mA/cm2. Furthermore, this system exhibits a record-high rate-cycling performance (162% round-trip efficiency, even at 3 mA/cm2) and a high discharge capacity of 2212 mAh/g at 1 mA/cm2. These ground-breaking performances could be attributed to the synergistic effect of the photocatalytic and electrocatalytic activities of SQD photocatalysts with the ideal conduction band/valence band values, the abundant defective sites, and the stronger O2 and lower LiO2 adsorption strengths of SQD photocatalysts. These systematic research studies highlight the significance of SQD bifunctional photocatalysts and could be extended to other photocatalysts for further high-efficiency photoelectric conversion and storage.

Metal-Doped Boron Quantum Dots for Versatile Detection of Lactate and Fluorescence Bioimaging

To improve the stability and fluorescence (FL) of monoelemental boron nanomaterials, this work put forward a metal-coordination strategy to explore emerging metal-doped boron quantum dots, Co@BQDs. Through theoretical calculations, B-Co bonding as predicted can suppress the B-O reaction and protect the electronic structures of exfoliated two-dimensional (2D) boron from oxidation and decomposition upon exposure to oxygen. In experimental studies, Co²⁺ was added into a dispersion liquid of bulk boron and subjected to probe sonication to promote Co²⁺ adsorption on the surface of exfoliated 2D boron, followed by Co²⁺ coordination with exposed boron atoms. Solvothermal treatment of exfoliated 2D boron resulted in the generation of Co²⁺-doped 0D boron Co@BQDs. Experimental results confirm that Co@BQDs have higher colloidal and FL stability than BQDs as a reference. B-Co bonding formation to suppress the B-O reaction ensures the high stability of exfoliated boron structures. A dispersion liquid of Co@BQDs with stable and bright FL was used for visual FL imaging of solutions and solid substrates. Based on enzymatic and cascade oxidation-induced FL quenching of Co@BQDs, a novel FL bio-probe of lactate was explored. This bio-probe, with a broad detection range of 0.01-10 mM and a low detection limit of 3.1 μM, enables FL sensing of lactate in biosamples and shows high detection recoveries of 98.0-102.8%. Moreover, this bio-probe realized versatile FL imaging and visual detection of lactate in liquid/solid-phase systems. These results demonstrate great prospects of Co@BQDs as emerging and efficient imaging reagents for long-term tracking and bioimaging applications.

Iron Oxide Nanoparticle-Based Ferro-Nanofluids for Advanced Technological Applications

Iron oxide nanoparticle (ION)-based ferro-nanofluids (FNs) have been used for different technological applications owing to their excellent magneto-rheological properties. A comprehensive overview of the current advancement of FNs based on IONs for various engineering applications is unquestionably necessary. Hence, in this review article, various important advanced technological applications of ION-based FNs concerning different engineering fields are critically summarized. The chemical engineering applications are mainly focused on mass transfer processes. Similarly, the electrical and electronics engineering applications are mainly focused on magnetic field sensors, FN-based temperature sensors and tilt sensors, microelectromechanical systems (MEMS) and on-chip components, actuators, and cooling for electronic devices and photovoltaic thermal systems. On the other hand, environmental engineering applications encompass water and air purification. Moreover, mechanical engineering or magneto-rheological applications include dampers and sealings. This review article provides up-to-date information related to the technological advancements and emerging trends in ION-based FN research concerning various engineering fields, as well as discusses the challenges and future perspectives.

Light-induced tumor theranostics based on chemical-exfoliated borophene

Among 2D materials (Xenes) which are at the forefront of research activities, borophene, is an exciting new entry due to its uniquely varied optical, electronic, and chemical properties in many polymorphic forms with widely varying band gaps including the lightest 2D metallic phase. In this paper, we used a simple selective chemical etching to prepare borophene with a strong near IR light-induced photothermal effect. The photothermal efficiency is similar to plasmonic Au nanoparticles, with the added benefit of borophene being degradable due to electron deficiency of boron. We introduce this selective chemical etching process to obtain ultrathin and large borophene nanosheets (thickness of ~4 nm and lateral size up to ~600 nm) from the precursor of AlB₂. We also report first-time observation of a selective Acid etching behavior showing HCl etching of Al to form a residual B lattice, while HF selectively etches B to yield an Al lattice. We demonstrate that through surface modification with polydopamine (PDA), a biocompatible smart delivery nanoplatform of B@PDA can respond to a tumor environment, exhibiting an enhanced cellular uptake efficiency. We demonstrate that borophene can be more suitable for safe photothermal theranostic of thick tumor using deep penetrating near IR light compared to gold nanoparticles which are not degradable, thus posing long-term toxicity concerns. With about 40 kinds of borides, we hope that our work will open door to more discoveries of this top-down selective etching approach for generating borophene structures with rich unexplored thermal, electronic, and optical properties for many other technological applications.

2+δ-Dimensional Materials via Atomistic Z-Welding

Pivotal to functional van der Waals stacked flexible electronic/excitonic/spintronic/thermoelectric chips is the synergy amongst constituent layers. However; the current techniques viz. sequential chemical vapor deposition, micromechanical/wet-chemical transfer are mostly limited due to diffused interfaces, and metallic remnants/bubbles at the interface. Inter-layer-coupled 2+δ-dimensional materials, as a new class of materials can be significantly suitable for out-of-plane carrier transport and hence prompt response in prospective devices. Here, the discovery of the use of exotic electric field ≈10⁶  V cm^{- 1} (at microwave hot-spot) and 2 thermomechanical conditions i.e. pressure ≈1 MPa, T ≈ 200 °C (during solvothermal reaction) to realize 2+δ-dimensional materials is reported. It is found that P_z P_z chemical bonds form between the component layers, e.g., CB and CN in G-BN, MoN and MoB in MoS₂ -BN hybrid systems as revealed by X-ray photoelectron spectroscopy. New vibrational peaks in Raman spectra (BC ≈1320 cm^-1 for the G-BN system and MoB ≈365 cm^-1 for the MoS₂ -BN system) are recorded. Tunable mid-gap formation, along with diodic behavior (knee voltage ≈0.7 V, breakdown voltage ≈1.8 V) in the reduced graphene oxide-reduced BN oxide (RGO-RBNO) hybrid system is also observed. Band-gap tuning in MoS₂ -BN system is observed. Simulations reveal stacking-dependent interfacial charge/potential drops, hinting at the feasibility of next-generation functional devices/sensors.

Adsorption Behavior of Toxic Carbon Dichalcogenides (CX2; X = O, S, or Se) on β12 Borophene and Pristine Graphene Sheets: A DFT Study

The adsorption of toxic carbon dichalcogenides (CX2; X = O, S, or Se) on β12 borophene (β12) and pristine graphene (GN) sheets was comparatively investigated. Vertical and parallel configurations of CX2⋯β12/GN complexes were studied herein via density functional theory (DFT) calculations. Energetic quantities confirmed that the adsorption process in the case of the parallel configuration was more desirable than that in the vertical analog and showed values up to −10.96 kcal/mol. The strength of the CX2⋯β12/GN complexes decreased in the order CSe2 > CS2 > CO2, indicating that β12 and GN sheets showed significant selectivity for the CSe2 molecule with superb potentiality for β12 sheets. Bader charge transfer analysis revealed that the CO2⋯β12/GN complexes in the parallel configuration had the maximum negative charge transfer values, up to −0.0304 e, outlining the electron-donating character of CO2. The CS2 and CSe2 molecules frequently exhibited dual behavior as electron donors in the vertical configuration and acceptors in the parallel one. Band structure results addressed some differences observed for the electronic structures of the pure β12 and GN sheets after the adsorption process, especially in the parallel configuration compared with the vertical one. According to the results of the density of states, new peaks were observed after adsorbing CX2 molecules on the studied 2D sheets. These results form a fundamental basis for future studies pertaining to applications of β12 and GN sheets for detecting toxic carbon dichalcogenides.

Freestandingα-rhombohedral borophene nanosheets: preparation and memory device application

Borophene has attracted extensive interests owing to its distinct structural, electronic and optical properties for promising potential applications. However, the structural instability and need of metal substrate for deposition of borophene seriously restrict the exploration of its exceptional physical and chemical properties and further hamper its extensive applications towards high-performance electronic and optoelectronic devices. Here, we reported the synthesis of high-quality freestandingα-rhombohedral borophene nanosheets by a facile probe ultrasonic approach in different organic solvents. The results show that the nanosheets have high-quality in ethanol solution and have an average lateral size of 0.54μm and a thickness of around 1.2 nm. Photoluminescence spectra indicate that a strong quantum confinement effect occurs in the nanosheets, which caused the increase of the band gap from 1.80 eV for boron powders and 2.52 eV for the nanosheets s. A nonvolatile memory device based on the nanosheets mixed with polyvinylpyrrolidone was fabricated, which exhibited a good rewriteable nonvolatile memory behavior and good stability.

Bottom up approach of metal assisted electrochemical exfoliation of boron towards borophene

Electrochemical exfoliation of nonconductive boron to few-layered borophene is reported. This unique effect is achieved via the incorporation of bulk boron into metal mesh inducing electrical conductivity and opening a venue for borophene fabrication via this feasible strategy. The experiments were conducted in various electrolytes providing a powerful tool to fabricate borophene flakes with a thickness of ~ 3–6 nm with different phases. The mechanism of electrochemical exfoliation of boron is also revealed and discussed. Therefore, the proposed methodology can serve as a new tool for bulk scale fabrication of few-layered borophene and speed up the development of borophene-related research and its potential application.

Liquid-Phase Exfoliation of Nonlayered Non-Van-Der-Waals Crystals into Nanoplatelets

For nearly 15 years, researchers have been using liquid-phase exfoliation (LPE) to produce 2D nanosheets from layered crystals. This has yielded multiple 2D materials in a solution-processable form whose utility has been demonstrated in multiple applications. It was believed that the exfoliation of such materials is enabled by the very large bonding anisotropy of layered materials where the strength of intralayer chemical bonds is very much larger than that of interlayer van der Waals bonds. However, over the last five years, a number of papers have raised questions about our understanding of exfoliation by describing the LPE of nonlayered materials. These results are extremely surprising because, as no van der Waals gap is present to provide an easily cleaved direction, the exfoliation of such compounds requires the breaking of only chemical bonds. Here the progress in this unexpected new research area is examined. The structure and properties of nanoplatelets produced by LPE of nonlayered materials are reviewed. A number of unexplained trends are found, not least the preponderance of isotropic materials that have been exfoliated to give high-aspect-ratio nanoplatelets. Finally, the applications potential of this new class of 2D materials are considered.

A Facile, Fabric Compatible, and Flexible Borophene Nanocomposites for Self-Powered Smart Assistive and Wound Healing Applications

Smart fabrics that can harvest ambient energy and provide diverse sensing functionality via triboelectric effects have evoked great interest for next-generation healthcare electronics. Herein, a novel borophene/ecoflex nanocomposite is developed as a promising triboelectric material with tailorability, durability, mechanical stability, and flexibility. The addition of borophene nanosheets enables the borophene/ecoflex nanocomposite to exhibit tunable surface triboelectricity investigated by Kelvin probe force microscopy. The borophene/ecoflex nanocomposite is further fabricated into a fabric-based triboelectric nanogenerator (B-TENG) for mechanical energy harvesting, medical assistive system, and wound healing applications. The durability of B-TENG provides consistent output performance even after severe deformation treatments, such as folding, stretching, twisting, and washing procedures. Moreover, the B-TENG is integrated into a smart keyboard configuration combined with a robotic system to perform an upper-limb medical assistive interface. Furthermore, the B-TENG is also applied as an active gait phase sensing system for instantaneous lower-limb gait phase visualization. Most importantly, the B-TENG can be regarded as a self-powered in vitro electrical stimulation device to conduct continuous wound monitoring and therapy. The as-designed B-TENG not only demonstrates great potential for multifunctional self-powered healthcare sensors, but also for the promising advancements toward wearable medical assistive and therapeutic systems.

Microwave Synthesized 2D Gold and Its 2D-2D Hybrids

Xenes, i.e., monoelemental two-dimensional atomic sheets, are promising for sensitive and ultrafast sensor applications owing to exceptional carrier mobility; however, most of them oxidize below 500 °C and therefore cannot be employed for high-temperature applications. 2D gold, an oxidation-resistant plasmonic Xene, is extremely promising. 2D gold was experimentally realized by both atomic layer deposition and chemical synthesis using sodium citrate. However, it is imperative to develop a new facile single-step method to synthesize 2D gold. Here, liquid-phase synthesis of 2D gold is demonstrated by microwave exposure to auric chloride dispersed in dimethylformamide. Microscopies (AFM and high-resolution TEM), spectroscopies (Raman, UV-vis, and X-ray photoelectron), and X-ray diffraction establish the formation of a hexagonal crystallographic phase for 2D gold. 2D-2D hybrids of 2D gold have also been synthesized and investigated for electronic/optoelectronic behaviors and SERS-based molecular sensing. DFT band structure calculation for 2D gold and its hybrids corroborates the experimental findings.

2D materials: increscent quantum flatland with immense potential for applications

Quantum flatland i.e., the family of two dimensional (2D) quantum materials has become increscent and has already encompassed elemental atomic sheets (Xenes), 2D transition metal dichalcogenides (TMDCs), 2D metal nitrides/carbides/carbonitrides (MXenes), 2D metal oxides, 2D metal phosphides, 2D metal halides, 2D mixed oxides, etc. and still new members are being explored. Owing to the occurrence of various structural phases of each 2D material and each exhibiting a unique electronic structure; bestows distinct physical and chemical properties. In the early years, world record electronic mobility and fractional quantum Hall effect of graphene attracted attention. Thanks to excellent electronic mobility, and extreme sensitivity of their electronic structures towards the adjacent environment, 2D materials have been employed as various ultrafast precision sensors such as gas/fire/light/strain sensors and in trace-level molecular detectors and disease diagnosis. 2D materials, their doped versions, and their hetero layers and hybrids have been successfully employed in electronic/photonic/optoelectronic/spintronic and straintronic chips. In recent times, quantum behavior such as the existence of a superconducting phase in moiré hetero layers, the feasibility of hyperbolic photonic metamaterials, mechanical metamaterials with negative Poisson ratio, and potential usage in second/third harmonic generation and electromagnetic shields, etc. have raised the expectations further. High surface area, excellent young's moduli, and anchoring/coupling capability bolster hopes for their usage as nanofillers in polymers, glass, and soft metals. Even though lab-scale demonstrations have been showcased, large-scale applications such as solar cells, LEDs, flat panel displays, hybrid energy storage, catalysis (including water splitting and CO₂ reduction), etc. will catch up. While new members of the flatland family will be invented, new methods of large-scale synthesis of defect-free crystals will be explored and novel applications will emerge, it is expected. Achieving a high level of in-plane doping in 2D materials without adding defects is a challenge to work on. Development of understanding of inter-layer coupling and its effects on electron injection/excited state electron transfer at the 2D-2D interfaces will lead to future generation heterolayer devices and sensors.

Monoelemental two-dimensional boron nanomaterials beyond theoretical simulations: From experimental preparation, functionalized modification to practical applications

During the past decade, there is an explosive growth of theoretical and computational studies on 2D boron-based nanomaterials. In terms of extensive predictions from theoretical simulations, borophene, boron nanosheets and 2D boron derivatives show excellent structural, electronic, photonic and nonlinear optical characteristics, and potential applications in a wide range of fields. In recent years, previous studies have reported the successful experimental preparations, superior properties, multi-functionalized modifications of various 2D boron and its derivatives, which show many practical applications in significant fields. To further promote the ever-increasing experimental studies, this present review systematically summarizes recent progress on experimental preparation methods, functionalized modification strategies and practical applications of 2D boron-based nanomaterials and multifunctional derivatives. Firstly, this review summarizes the experimental preparation methods, including molecular beam epitaxy, chemical vapor deposition, liquid-phase exfoliation, chemical reaction, and other auxiliary methods. Then, various strategies for functionalized modification are introduced overall, focusing on borophene derivatives, boron-based nanosheets, atom-introduced, chemically-functionalized borophene and boron nanosheets, borophene or boron nanosheet-based heterostructures, and other functionalized 2D boron nanomaterials. Subsequently, various potential applications are discussed in detail, involving energy storage, catalysis conversion, photonics, optoelectronics, sensors, bio-imaging, biomedicine therapy, and adsorption. We comment the state-of-the-art related studies concisely, and also discuss the current status, probable challenges and perspectives rationally. This review is timely, comprehensive, in-depth and highly attractive for scientists from multiple disciplines and scientific fields, and can facilitate further development of advanced functional low-dimensional nanomaterials and multi-functionalized systems toward high-performance practical applications in significant fields.

Quantum-coupled borophene-based heterolayers for excitonic and molecular sensing applications

Borophene (B), with remarkably unique chemical binding in its crystallographic structural phases including anisotropic structures, theoretically has high Young's modulus and thermal conductivity. Moreover, it is metallic in nature, and has recently joined the family of two-dimensional (2D) materials and is poised to be employed in flexible hetero-layered devices and sensors in fast electronic gadgets and excitonic devices. Interfacial coupling helps individual atomic sheets synergistically work in tandem, and is very crucial in controllable functionality. Most of the microscopic and spectroscopic scans reveal surface information; however, information regarding interfacial coupling is difficult to obtain. Electronic signatures of dynamic inter-layer coupling in B/boron nitride (BN) and B/molybdenum disulfide (MoS₂) have been detected in the form of distinct peaks in differential current signals obtained from scanning tunneling spectroscopy (STS) and conducting atomic force microscopy (CAFM). These unique sets of observed peaks represent interfacial coupling quantum states. The peaks in the electronic density of states (DOS) obtained via density functional theory (DFT) band structure calculations matched well with the electronic signatures of coupling quantum states. In our calculations, we found that the DOS peak evolves when the component layers are brought to compromised distances. While B/BN exhibits green sensitivity indicating mid-gap formation, B/MoS₂ bestows red sensitivity indicating band-gap excitation of MoS₂. Molecular detection of methylene blue (MB) based on surface-enhanced Raman spectroscopy (SERS) was carried out with borophene-based hetero-layered stacks as molecular anchoring platforms.

Macroscopic Single-Phase Monolayer Borophene on Arbitrary Substrates

A major challenge in the investigation of all 2D materials is the development of synthesis protocols and tools which would enable their large-scale production and effective manipulation. The same holds for borophene, where experiments are still largely limited to in situ characterizations of small-area samples. In contrast, our work is based on millimeter-sized borophene sheets, synthesized on an Ir(111) surface in ultrahigh vacuum. Besides high-quality macroscopic synthesis, as confirmed by low-energy electron diffraction (LEED) and atomic force microscopy (AFM), we also demonstrate a successful transfer of borophene from Ir to a Si wafer via electrochemical delamination process. Comparative Raman spectroscopy, in combination with the density functional theory (DFT) calculations, proved that borophene's crystal structure has been preserved in the transfer. Our results demonstrate successful growth and manipulation of large-scale, single-layer borophene sheets with minor defects and ambient stability, thus expediting borophene implementation into more complex systems and devices.

Electronic structures and optical properties of monolayer borophenes

In this paper, we theoretically investigated the electronic and optical properties of monolayer borophene, including the electronic energy band, density of states (DOS), dielectric function, and absorption spectra and the charge distribution. The calculated phonon spectra and phononic DOS confirm that the four kinds of monolayer borophene structures can stably exist. Two-dimensional (2D) borophene exhibits apparent optical anisotropy in visible and near infrared (NIR) regions. Our results provide a reliable theoretical base for the application of monolayer borophene in optoelectronic devices.

Effects of adatom species on the structure, stability, and work function of adatom-α-borophene nanocomposites

Work function-tunable borophene-based electrode materials are of significant importance because they promote efficient carrier extraction/injection, thereby enabling electronic devices to achieve maximum energy conversion efficiency. Accordingly, determining the work function of adatom-borophene nanocomposites within a series wherein the adatom is systematically changed will facilitate the design of such materials. In this study, we theoretically determined that the M-B bond length, binding energy, electron transfer between adatoms and BBP, and work function (ϕ) are linearly dependent on the ionization potential (IP) and electronegativity for thermodynamically and kinetically stable adatom-α-borophene (M/BBP) systems involving a series of alkali (earth) metal/BBP (M = Li-Cs; Be-Ba) and halogen/BBP (M = F-I), respectively. However, the binding energies of Li/BBP and Be/BBP deviate from these dependencies owing to their super small adatoms and the resulting significantly enhanced effective M-B bonding areas. By interpreting the electron transfer picture among the different parts of M/BBP, we confirmed that metallic M/BBP possesses ionic sp-p and dsp-p M-B bonds in alkali (earth) metal/BBP but covalent-featured ionic p-p interactions in halogen/BBP. In particular, the direct proportionality between IP and ϕ for alkali (earth) metal/BBP originates from the synergistic effect of charge rearrangement and the increased induced dipole moment; however, the inverse proportionality between electronegativity and ϕ for halogen/BBP arises from the adsorption induced charge redistribution. Our results provide guidance for experimental efforts toward the realization of work function-tunable borophene-based electrodes as well as insight into the bonding rules between various adatoms and α-borophene.

Exploring the emerging applications of the advanced 2-dimensional material borophene with its unique properties

Borophene, a crystalline allotrope of monolayer boron, with a combination of triangular lattice and hexagonal holes, has stimulated wide interest in 2-dimensional materials and their applications. Although their properties are theoretically confirmed, they are yet to be explored and confirmed experimentally. In this review article, we present advancements in research on borophene, its synthesis, and unique properties, including its advantages for various applications with theoretical predictions. The uniqueness of borophene over graphene and other 2-dimensional (2D) materials is also highlighted along with their various structural stabilities. The strategy for its theoretical simulations, leading to the experimental synthesis, could also be helpful for the exploration of many newer 2D materials.

Few-layer Mg-deficient borophene nanosheets: I2 oxidation and ultrasonic delamination from MgB2

By using I₂ as an oxidant and CH₃CN as a reaction medium, few-layer Mg-deficient borophene nanosheets (FBN) with a stoichiometric ratio of Mg_0.22B₂ are prepared by oxidizing MgB₂ in a mixture of CH₃CN and HCl for 14 days under nitrogen protection and followed by ultrasonic delaminating in CH₃CN for 2 h. The prepared FBN possess a two-dimensional flake morphology, and they show a clear interference fringe with a d-spacing of 0.251 nm corresponding to the (208) plane of rhombohedral boron. While maintaining the hexagonal boron networks of MgB₂, the FBN have an average thickness of about 4.14 nm (four monolayer borophene) and a lateral dimension of 500 nm, and the maximum Mg deintercalation rate can reach 78%. The acidity of the reaction system plays an important role; the HCl reaction system not only facilitates the oxidation of MgB₂ by I₂, but also increases the deintercalation ratio of Mg atoms. Etching of the Mg atom layer with HCl, the negative charge decrease of the boron layer by I₂ oxidation, and the Mg chelating effect from CH₃COOH due to the hydrolysis of CH₃CN in an HCl environment led to a high deintercalation rate of the Mg atom. Density functional theory (DFT) calculations further support the result that the maximum deintercalation rate of Mg atoms is about 78% while maintaining the hexagonal layer structure of boron. This research solves the problems of low Mg atom deintercalation rate and hexagonal boron structure destruction when using the precursor MgB₂ to produce borophene nanosheets, which is of great significance for large-scale novel preparation and application of borophene nanosheets.

Bottom-up synthesized crystalline boron quantum dots with nonvolatile memory effects through one-step hydrothermal polymerization of ammonium pentaborane and boric acid

Crystalline BQDs are synthesized through a bottom-up strategy and used to fabricate a BQD–PVP memory device with nonvolatile rewritable memory effects.

Borophene as a rising star in materials chemistry: synthesis, properties and applications in analytical science and energy devices

Borophene is a two-dimensional material that has shown outstanding applications in energy storage devices and analytical chemistry.

Synthesis of bilayer borophene

As the nearest-neighbour element to carbon, boron is theoretically predicted to have a planar two-dimensional form, named borophene, with novel properties, such as Dirac fermions and superconductivity. Several polymorphs of monolayer borophene have been grown on metal surfaces, yet thicker bilayer and few-layer nanosheets remain elusive. Here we report the synthesis of large-size, single-crystalline bilayer borophene on the Cu(111) surface by molecular beam epitaxy. Combining scanning tunnelling microscopy and first-principles calculations, we show that bilayer borophene consists of two stacked monolayers that are held together by covalent interlayer boron-boron bonding, and each monolayer has β₁₂-like structures with zigzag rows. The formation of a bilayer is associated with a large transfer and redistribution of charge in the first boron layer on Cu(111), which provides additional electrons for the bonding of additional boron atoms, enabling the growth of the second layer. The bilayer borophene is shown to possess metallic character, and be less prone to being oxidized than its monolayer counterparts.

C-doping anisotropy effects on borophene electronic transport

The electronic transport anisotropy for different C-doped borophene polymorphs (β₁₂andχ₃) was investigated theoretically combining density functional theory and non-equilibrium Green's function. The energetic stability analysis reveals that B atoms replaced by C is more energetically favorable forχ₃phase. We also verify a directional character of the electronic band structure on C-doped borophene for both phases. Simulated scanning tunneling microscopy and also total density of charge confirm the directional character of the bonds. The zero bias transmission forβ₁₂phase atE-E_F= 0 shows that C-doping induces a local current confinement along the lines of doped sites. TheI-Vcurves show that C-doping leads to an anisotropy amplification in theβ₁₂than in theχ₃. The possibility of confining the electronic current at an specific region of the C-doped systems, along with the different adsorption features of the doped sites, poses them as promising candidates to highly sensitive and selective gas sensors.

Quantum transmission through the n-p-n heterojunction of massive 8-Pmmnborophene

We investigate the quantum transmission through the n-p-n heterojunction of massive 8-Pmmnborophene. It is found that the Dirac mass of the electron interacts nontrivially with the anisotropy of the 8-Pmmnborophene, leading to the occurrence of new transmission behaviors in this n-p-n heterojunction. Firstly, the effective energy range of nonzero transmission can be reduced but deviates from the mass amplitude, which induces the further controllability of the transmission property. Secondly, even if the equal-energy surfaces in the p and n parts do not encounter in thek-space, finite transmission is allowed to occur as well. In addition, the existence of Dirac mass can change the reflection manner from the retroreflection to the specular reflection under appropriate conditions. The findings in this work can be helpful in describing the quantum transport properties of the heterojunction based on 8-Pmmnborophene.

Scalable Production of Freestanding Few-Layer β12-Borophene Single Crystalline Sheets as Efficient Electrocatalysts for Lithium-Sulfur Batteries

Two-dimensional (2D) borophene has attracted tremendous interest due to its fascinating properties, which have potential applications in catalysts, energy storage devices, and high-speed transistors. In the past few years, borophene was theoretically predicted as an ideal electrode material for lithium-sulfur (Li-S) batteries because of its low-density, metallic conductivity, high Li-ion surface mobility, and strong interface bonding energy to polysulfide. But until now, borophene-based Li-S batteries have not yet been achieved in experiments due to the absence of a large-scale synthetic method of freestanding borophene nanostructures with a high enough structural stability, conductivity, and uniformity. Herein, we developed a low-temperature liquid exfoliation (LTLE) method to synthesize freestanding few-layer β₁₂-borophene single-crystalline sheets with a P6¯m2 symmetry in tens of milligrams. The as-synthesized 2D sheets were used as the polysulfide immobilizers and electrocatalysts of Li-S batteries. The resulting borophene-based Li-S battery delivered an extralarge areal capacity of 5.2 mAh cm^-2 at a high sulfur loading of 7.8 mg cm^-2, an excellent rate performance of 8 C (@721 mAh g^-1), and an ultralow capacity fading rate of 0.039% in 1000 cycles, outperforming commercial Li-ion batteries and many other 2D material-based Li-S batteries. Based on the density functional theory model, the excellent electrochemical performances of the borophene-based Li-S batteries should originate from the enormous enhancement of β₁₂-borophene sheets for both the surface migration of the Li-ions and the adsorption energy of Li₂S_n clusters. Our results thus demonstrate a great potential for scalable production of freestanding β₁₂-borophene single-crystalline sheets in future high-performance Li-S batteries.

Step-Edge Epitaxy for Borophene Growth on Insulators

Borophene─a monatomic layer of boron atoms─stands out among two-dimensional (2D) materials, with its versatile properties tantalizing for physics exploration and next-generation devices. Yet its phases are all synthesized on and stay bound to metal substrates, hampering both characterization and use. Borophene growth on an inert insulator would allow postsynthesis exfoliation, but the weak adhesion to such a substrate results in a high 2D nucleation barrier, preventing clean borophene growth. This challenge can be circumvented in a strategy devised and demonstrated here with ab initio calculations. Naturally present 1D-defects, the step-edges on an h-BN substrate surface, enable boron epitaxial assembly, reduce the nucleation dimensionality, and lower the barrier by an order of magnitude (to 1.1 eV or less), yielding a v_1/9 phase. Weak borophene adhesion to the insulator makes it readily accessible for comprehensive property tests or transfer into the device setting.

Chemistry, Functionalization, and Applications of Recent Monoelemental Two-Dimensional Materials and Their Heterostructures

The past decades have witnessed a rapid expansion in investigations of two-dimensional (2D) monoelemental materials (Xenes), which are promising materials in various fields, including applications in optoelectronic devices, biomedicine, catalysis, and energy storage. Apart from graphene and phosphorene, recently emerging 2D Xenes, specifically graphdiyne, borophene, arsenene, antimonene, bismuthene, and tellurene, have attracted considerable interest due to their unique optical, electrical, and catalytic properties, endowing them a broader range of intriguing applications. In this review, the structures and properties of these emerging Xenes are summarized based on theoretical and experimental results. The synthetic approaches for their fabrication, mainly bottom-up and top-down, are presented. Surface modification strategies are also shown. The wide applications of these emerging Xenes in nonlinear optical devices, optoelectronics, catalysis, biomedicine, and energy application are further discussed. Finally, this review concludes with an assessment of the current status, a description of existing scientific and application challenges, and a discussion of possible directions to advance this fertile field.

Borophene: Two-dimensional Boron Monolayer: Synthesis, Properties, and Potential Applications

Borophene, a monolayer of boron, has risen as a new exciting two-dimensional (2D) material having extraordinary properties, including anisotropic metallic behavior and flexible (orientation-dependent) mechanical and optical properties. This review summarizes the current progress in the synthesis of borophene on various metal substrates, including Ag(110), Ag(100), Au(111), Ir(111), Al(111), and Cu(111), as well as heterostructuring of borophene. In addition, it discusses the mechanical, thermal, magnetic, electronic, optical, and superconducting properties of borophene and the effects of elemental doping, defects, and applied mechanical strains on these properties. Furthermore, the promising potential applications of borophene for gas sensing, energy storage and conversion, gas capture and storage applications, and possible tuning of the material performance in these applications through doping, formation of defects, and heterostructures are illustrated based on available theoretical studies. Finally, research and application challenges and the outlook of the whole borophene's field are given.

Ultraviolet photodetector based on p-borophene/n-ZnO heterojunction

Borophene has attracted enormous attention because of its rich and unique structural and electronic properties for promising pratical applications. Although borophene sheets have been realized on different substrates in recent experiments, there are very few reports on the device application of borophene. Recently, borophene can be grown on some functional substrates, which lays a good foundation for its potential applications. Here, we report that hydrogenated borophene can be grown on the fluorine-doped tin oxide glass substrate. The phase of the obtained borophene is well consistent with the predicted semiconductingδ₅-boron sheet. Furthermore, a vertical heterojunction ultraviolet detector based p-borophene/n-zinc oxide was fabricated. The photoresponsivity of the detector is 1.02 × 10^-1A W^-1, the specific detection rate was 1.43 × 10⁹Jones and the response speed wasτ_res = 2.8 s,τ_rec = 3.2 s at the reversed bias of -5 V under the light excitation of 365 nm. This work will lay a foundation for further study on the attractive properties and applications of borophene in new optoelectronic devices and integrated circuits.

Application of borophene as catechol sensor: a computational study

The efficacy of borophene (BP) as catechol (CC) sensor was explored using density functional theory (DFT) method. All calculations were performed at B3LYP level of theory and 6-31 + G(d) basis set employing the dispersion correction term of Grimme to consider dispersion interactions. The CC molecule is adsorbed on top of BP horizontally with the adsorption energy (E_ads) of about - 13.5 kcal·mol^-1. The HOMO and LUMO levels of nanosheet destabilize by about 0.36 and 0.14 eV, respectively, going from bare BP to BP-CC complex. Therefore, the E_g value decreases by about 10.5% upon adsorption process, which is a reasonable energy gap change for detection of CC. The negligible difference between the work function values (Φ, defined as the minimum amount of the energy needed to remove an electron from a solid to a point in the vacuum immediately outside the solid surface) of BP and its complex with CC indicates that the BP sheet is not an appropriate Φ-type sensor (in these sensors, adsorption of a chemical changes the gate voltage and produces an electrical signal that leads to the detection of chemical agent) for CC detection. The electrical conductivity of BP becomes 72 times higher after CC adsorption. The time needed for CC desorption from BP sheet is 7.6 ns, based on conventional transition state theory, showing that BP benefits from a short recovery time. The effect of CC concentration was explored by adsorption of 2 and 3 CC molecules on top of BP nanosheet and the results showed that the sensor response does not change by increasing the CC concentration. Also, the effect of lateral dimensions of BP on the adsorption energy was explored and it was shown that E_ads increases by enlargement of the nanosheet.

Two-Dimensional Boron-Rich Monolayer BxN as High Capacity for Lithium-Ion Batteries: A First-Principles Study

Owing to lightweight, abundant reserves, low cost, and nontoxicity, B-based two-dimensional (2D) materials, e.g., borophene, exhibit great potential as new anode materials with higher energy density for Li-ion batteries (LIBs). However, exfoliation of borophene from the Ag substrate remains the most daunting challenge due to their strong interfacial interactions, significantly restricting its practical applications. In this study, through first-principles swarm-intelligence structure calculations, we have found several Boron-rich boron nitride B_xN materials (x = 2, 3, 4, and 5) with increased stability and weakened interactions with the Ag(111) substrate compared with δ6-borophene. A high cohesive energy and superior dynamical, thermodynamic, and mechanical stability provide strong feasibility for their experimental synthesis. The obtained B_xN materials exhibit a high mechanical strength (94-226 N/m) and low interfacial bonding with the Ag substrate, from -0.043 to -0.054 eV Å^-2, significantly smaller than that of δ6-borophene. Among them, B₃N and B₅N exhibit not only a remarkably high storage capacity of 1805-3153 mAh/g but also a low barrier energy and open-circuit voltage. Moreover, B₂N showed a cross-sheet motion with a low barrier of 0.24 eV, which is unique compared with the in-plane diffusion in most other 2D electrode materials restricted by their quasi-flat geometry. B_xN also exhibits excellent cyclability with improved metallic conductivity upon Li-ion intercalation, showing great potential in LIB applications. This study opens up a new avenue to explore B-rich 2D electrode materials in energy applications and provide instructive insights into borophene functionalization and exfoliation.