Enabling Tailorable Optical Properties and Markedly Enhanced Stability of Perovskite Quantum Dots by Permanently Ligating with Polymer Hairs

Soft optical materials based on the integration of perovskite nanostructures and block copolymers

Metal halide perovskites and their nanostructures have efficient optical absorption and emission in the visible range with high external quantum efficiency. They have been at the forefront of next-generation photovoltaics and optoelectronics applications. But several intrinsic limitations of perovskites including low stability and incompatibility with lithography-based patterning constrains their broader applications. In recent years, the integration of perovskites with polymers especially multifunctional block copolymers (BCPs) has provided a new approach to overcome those issues. The chemical composition and chain architecture of BCPs are critical for achieving synergistic effects with perovskites in their hybrid systems. In this Highlight review article, we provide an overview and critical summary of the recent progress in the creation of perovskite-BCP hybrid structures, with a focus on the different roles of BCPs. The major categories include: (i) BCPs act as the nanopattern template for the spatial control and patterning of perovskite; (ii) BCP micelles or stars act as the template for perovskite nanostructure crystallization; (iii) BCPs act as the macromolecular ligands for perovskite NCs during its solution synthesis; (iv) BCP encapsulation of perovskite NCs into hierarchical composite particles; and (v) BCP incorporation into bulk perovskite and forming bulk composite films. The applications of perovskite-BCP hybrid structures in various fields and the major current challenges are also identified and discussed.

Tuning Perovskite Nanocrystal Synthesis via Amphiphilic Block Copolymer Templates and Solvent Interactions

Amphiphilic block copolymer (a-BCP) micelles offer morphological diversity and dimensional tunability, making them suitable for the fabrication of perovskite nanocrystals. However, precise control over the nucleation and growth of perovskite nanocrystals using a-BCP colloidal templates remains underexplored. This study investigates the effects of toluene, methanol, and polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) on the formation of cesium lead bromide (CsPbBr3) nanocrystals. The process involves four stages: (i) PS-b-P2VP micellization, (ii) PbBr2 complexation, (iii) coordination interaction with P2VP, and (iv) burst nucleation of CsPbBr3 nanocrystals. Toluene, a good solvent for PS but a nonsolvent for P2VP, PbBr2, and CsBr, facilitates the formation of PS-b-P2VP spherical micelles. Adding PbBr2 to these micelles in toluene results in multiple emulsion, dispersing PbBr2 microstructures (microemulsion) and forming [PbBr3]- complexes encapsulated by the micelles (nanoemulsion). Prolonged stirring enhances this nanoemulsion. CsBr, insoluble in toluene, must be dissolved in methanol before being mixed with micelle-encapsulated complexes, promoting quick crystal nucleation. However, excess methanol weakens micellization, leading to the formation of fused micelles and irregular nanocrystals. At a high methanol content, [PbBr4]2- complexes also form, driving CsPbBr3 to CsPb2Br5 transformation via Ostwald ripening, resulting in large CsPb2Br5 microcrystals that precipitate due to gravitational forces overcoming Brownian motion, destabilizing their dispersion in the solution.

Perovskites as Multiphoton Fluorescence Contrast Agents for In Vivo Imaging

Multiphoton fluorescence microscopy is a powerful tool for imaging and exploring biological tissue at subcellular spatial resolution while minimizing photobleaching and autofluorescence. For optimal performance in multiphoton microscopy, materials exhibiting a large multiphoton absorption cross section (σn) and fluorescence quantum yield are desired. Notably, perovskite nanocrystals (CsPbX3, PNCs) exhibit exceptionally large two-, three-, up to five photon absorption cross section (σ2 ∼ 106 GM, σ3 ∼ 10-73 cm6s2 photon-2, σ5 ∼ 10-136 cm10s4 photon-4), along with near unity fluorescence quantum yield, making them desirable for deep tissue applications. Here, we employed PNCs as contrast agents to image mesenchymal stromal cells in a living mouse. The PNCs were stabilized by encapsulating them in a SiO2 matrix (∼60-70 nm in diameter), offering versatility for subsequent surface modification to target specific biological entities for both diagnostic and therapeutic applications. Multiphoton imaging of PNCs offers substantial benefits for dynamic tracking of cells in deep tissue, such as in understanding immune cell migration and other biological processes in both healthy and diseased tissues.

Construction of Cs2AgBiCl6/COF Heterojunction for Boosted Photocatalytic Thioester Oxidation

Lead-free halide perovskites as a new kind of potential candidate for photocatalytic organic synthesis have attracted much attention recently. The rational heterojunction construction is regarded as an efficient strategy to delicately regulate their catalytic performances. Herein, a semi-conductive covalent organic framework (COF) nanosheet, C4N, is employed as the functional component to construct Cs2AgBiCl6/C4N (CABC/C4N) heterojunction. It is found that the C4N nanosheets with rich surface functional groups can serve as heterogeneous nucleation sites to manipulate the growth of CABC nanocrystals and afford close contact between each other, therefore facilitate the transfer and spatial separation of photogenerated charge carriers, as verified by in situ X-ray photoelectronic spectroscopy and Kelvin probe force microscopy. Moreover, the oxygen affinity of C4N endows the heterojunctions with outstanding aerobic reactivity, thus improving the photocatalytic performance largely. The optimal CABC/C4N heterojunction delivers a thioanisole conversion efficiency of 100% after 6 h, which is 2.2 and 7.7-fold of that of CABC and C4N. This work provides a new ideal for the design and application of lead-free perovskite heterojunction photocatalysts for organic reactions.

Photoluminescence Enhancement in Silica-Confined Ligand-Free Perovskite Nanocrystals by Suppression of Silanol-Induced Traps and Phase Impurities

The detriments of intrinsic silanol groups in mesoporous silica to the photoluminescence (PL) of lead halide perovskite nanocrystals (LHP NCs) confined in the template have never been determined and clearly elucidated. Here, we disclose that silanol-induced Cs+ and Br- deficiencies prompt the generation of traps and CsPb2Br5 impurities. The temperature-dependent PL spectra verify the higher energetic barrier of trap states in CsPbBr3 NCs confined in silanol-rich mesoporous silica. Femtosecond transient absorption spectra reveal the trapped state mediates a broadband photoinduced absorption and long-lived decay pathway of CsPbBr3 NCs in silanol-rich templates. A remarkable improvement (up to 160-fold) in PL quantum yields is realized by simple silanol elimination. This work demonstrates the detrimental effects of silanol sites on the PL properties of LHP NCs impregnated in mesoporous silica and provides a new perspective for the ligand-free synthesis of high-quality LHP NCs in mesoporous templates by facile impregnation for practical applications.

Synthesis-Kinetics of Violet- and Blue-Emitting Perovskite Nanocrystals with High Brightness and Superior Stability toward Flexible Conversion Layer

The low photoluminescence (PL) efficiency and unstable features of small blue-emitting CsPbX3 nanocrystals (NCs) greatly limit their applications in optoelectronics field. Herein, the synergistic and post-treatment kinetics are studied to create highly bright and anomalous stable violet (peak position of ≈408 nm) and blue (peak position of ∼ 466 nm) emitting perovskite NCs. Ligand and ion exchange mechanism are systematic studied by the evolution of absorption, PL, and fluorescence lifetime to evaluate ligand bonding, defect engineering, and non-radiative recombination. Didodecyl dimethyl mmonium chloride (DDAC) and CuX2 post-synergistic treatment created DDAC-CsPbCl3-CuCl2 and DDAC-CsPbCl3-CuBr2 NCs that remained the phase composition, morphology, and size of CsPbCl3 NCs. The PL efficiencies are drastically increased to 42 and 85% for violet- and blue-emitting NCs, respectively. The stability test indicated that the NCs enable against various harsh conditions (e.g., ultraviolet light irradiation and heat-treatment). The NCs retained their initial PL efficiency after 2 months under ambient conditions and UV light irradiation. These NCs also exhibited high stability after heat-treatment at 120 °C. The emitting NCs embedded in flexible films still revealed bright PL and high stability, suggesting current results provide a new avenue for the application in the field of optoelectronics.

Nucleophilic Reaction-Enabled Chloride Modification on CsPbI3 Quantum Dots for Pure Red Light-Emitting Diodes with Efficiency Exceeding 26

High-performance pure red perovskite light-emitting diodes (PeLEDs) with an emission wavelength shorter than 650 nm are ideal for wide-color-gamut displays, yet remain an unprecedented challenge to progress. Mixed-halide CsPb(Br/I)3 emitter-based PeLEDs suffer spectral stability induced by halide phase segregation and CsPbI3 quantum dots (QDs) suffer from a compromise between emission wavelength and electroluminescence efficiency. Here, we demonstrate efficient pure red PeLEDs with an emission centered at 638 nm based on PbClx -modified CsPbI3 QDs. A nucleophilic reaction that releases chloride ions and manipulates the ligand equilibrium of the colloidal system is developed to synthesize the pure red emission QDs. The comprehensive structural and spectroscopic characterizations evidence the formation of PbClx outside the CsPbI3 QDs, which regulates exciton recombination and prevents the exciton from dissociation induced by surface defects. In consequence, PeLEDs based on PbClx -modified CsPbI3 QDs with superior optoelectronic properties demonstrate stable electroluminescence spectra at high driving voltages, a record external quantum efficiency of 26.1 %, optimal efficiency roll-off of 16.0 % at 1000 cd m-2 , and a half lifetime of 7.5 hours at 100 cd m-2 , representing the state-of-the-art pure red PeLEDs. This work provides new insight into constructing the carrier-confined structure on perovskite QDs for high-performance PeLEDs.

Polymeric Metal Halides with Bright Luminescence and Versatile Processability

Most of current metal halide materials, including all inorganic and organic-inorganic hybrids, are crystalline materials with poor workability and plasticity that limit their application scope. Here, we develop a novel class of materials termed polymeric metal halides (PMHs) through introducing polycations into antimony-based metal halide materials as A-site cations. A series of PMHs with orange-yellow broadband emission and large Stokes shift originating from inorganic self-trapped excitons are successfully prepared, which meanwhile exhibit the excellent processability and formability of polymers. The versatility of these PMHs is manifested as the broad choices of polycations, the ready extension to manganese- and copper-based halides, and the tolerance to molar ratios between polycations and metal halides in the formation of PMHs. The merger of polymer chemistry and inorganic chemistry thus provides a novel generic platform for the development of metal halide functional materials.

Light-Mediated Multilevel Flexible High-Efficiency Perovskite Resistive Switching Memory Based on Mn:CsPbCl3 Nanocrystals

Herein, the electrical characteristics, photoelectric properties, resistive switching (RS) mechanism, and flexible storage application of Ag/PMMA&Mn:CsPbCl3/ITO (PMMA = poly(methyl methacrylate)) devices are studied by using the photoelectric material Mn:CsPbCl3 nanocrystals (NCs) embedded in PMMA as the RS layer. The devices exhibit bipolar RS behavior with low operating voltage, excellent cycling endurance (>1000 times), long retention time (≥104 s), high ON/OFF ratio (≈104), and good environmental stability. The flexible memory devices have demonstrated reliable mechanical stability of consecutive 1000 bending cycles. In addition, multilevel data storage is realized by introducing the UV light, and the adjustive resistive switching characteristics is achieved through photoelectric synergistic work. The resistive switching mechanism under the excitation of light has been studied comprehensively. This work may pave a new way for developing the next generation of high-density data storage and photoelectric memristor.

Bulk CsPbClxBr3-x (1 ≤ x ≤ 3) perovskite nanocrystals/polystyrene nanocomposites with controlled Rayleigh scattering for light guide plate

Perovskite nanocrystals (PNCs)/polymer nanocomposites can combine the advantages of each other, but extremely few works can achieve the fabrication of PNCs/polymer nanocomposites by bulk polymerization. We originally adopt a two-type ligand strategy to fabricate bulk PNCs/polystyrene (PS) nanocomposites, including a new type of synthetic polymerizable ligand. The CsPbCl3 PNCs/PS nanocomposites show extremely high transparency even the doping content up to 5 wt%. The high transparency can be ascribed to the Rayleigh scattering as the PNCs distribute uniformly without obvious aggregation. Based on this behavior, we first exploit the potential of PNCs to serve as scatters inside light guided plate (LGP), whose surface illuminance and uniformity can be improved, and this new kind of LGP is compatible with the advanced liquid crystal display technology. Thanks to the facile composition adjustment of CsPbClxBr3-x (1 ≤ x ≤ 3) PNCs, the Rayleigh scattering behavior can also be adjusted so as to the performance of LGP. The best-performing 5.0-inch LGP based on CsPbCl2.5Br0.5 PNCs/PS nanocomposites shows 20.5 times higher illuminance and 1.8 times higher uniformity in display than the control. The LGP based on PNCs/PS nanocomposite exhibits an enormous potential in commercialization no matter based on itself or combined with the LGP-related technology.

Colloidal Polymer-Templated Formation of Inorganic Nanocrystals and their Emerging Applications

Inorganic nanocrystals possess unique physicochemical properties compared to their bulk counterparts. Stabilizing agents are commonly used for the preparation of inorganic nanocrystals with controllable properties. Particularly, colloidal polymers have emerged as general and robust templates for in situ formation and confinement of inorganic nanocrystals. In addition to templating and stabilizing inorganic nanocrystals, colloidal polymers can tailor their physicochemical properties such as size, shape, structure, composition, surface chemistry, and so on. By incorporating functional groups into colloidal polymers, desired functions can be integrated with inorganic nanocrystals, advancing their potential applications. Here, recent advances in the colloidal polymer-templated formation of inorganic nanocrystals are reviewed. Seven types of colloidal polymers, including dendrimer, polymer micelle, stare-like block polymer, bottlebrush polymer, spherical polyelectrolyte brush, microgel, and single-chain nanoparticle, have been extensively applied for the synthesis of inorganic nanocrystals. Different strategies for the development of these colloidal polymer-templated inorganic nanocrystals are summarized. Then, their emerging applications in the fields of catalysis, biomedicine, solar cells, sensing, light-emitting diodes, and lithium-ion batteries are highlighted. Last, the remaining issues and future directions are discussed. This review will stimulate the development and application of colloidal polymer-templated inorganic nanocrystals.

In Situ Interfacial-Assembly Perovskite Quantum Dot via Marangoni and Capillary Convection Manipulation for Robust Luminescence

In solid substrates, colloidal solutions produce irregular deposits on the surface by Marangoni flow and capillary flow during evaporation. Reportedly, perovskite quantum dots (PQDs) as a colloidal solution have irregular surfaces based on a similar principle as the coffee ring effect in QD systems when droplets evaporate from the substrate. Given that this issue is due to the direction of Marangoni and capillary flows, the substrate is tilted to change the direction of the flows. The appropriate angle is determined by controlling the angle of the substrate so that the two flows circulate similarly; this method is called "assembly-coating". Herein, we compare the PL intensity before and after the thermal evaporation of the thin films prepared by conventional and assembly-coating. Moreover, by characterizing the diode device (hole-only space charge limited current) for each coating process, the charge carrier characteristics are investigated in detail. Therefore, we suggest a facile strategy to obtain a uniform surface and thermal evaporative stability using colloidal solutions. This strategy is effective in designing surface uniformity and light-emitting layers for colloidal solution deposition and assembly.

Technological Breakthroughs in Chip Fabrication, Transfer, and Color Conversion for High-Performance Micro-LED Displays

The implementation of high-efficiency and high-resolution displays has been the focus of considerable research interest. Recently, micro light-emitting diodes (micro-LEDs), which are inorganic light-emitting diodes of size <100 µm2 , have emerged as a promising display technology owing to their superior features and advantages over other displays like liquid crystal displays and organic light-emitting diodes. Although many companies have introduced micro-LED displays since 2012, obstacles to mass production still exist. Three major challenges, i.e., low quantum efficiency, time-consuming transfer, and complex color conversion, have been overcome with technological breakthroughs to realize cost-effective micro-LED displays. In the review, methods for improving the degraded quantum efficiency of GaN-based micro-LEDs induced by the size effect are examined, including wet chemical treatment, passivation layer adoption, LED structure design, and growing LEDs in self-passivated structures. Novel transfer technologies, including pick-up transfer and self-assembly methods, for developing large-area micro-LED displays with high yield and reliability are discussed in depth. Quantum dots as color conversion materials for high color purity, and deposition methods such as electrohydrodynamic jet printing or contact printing on micro-LEDs are also addressed. This review presents current status and critical challenges of micro-LED technology and promising technical breakthroughs for commercialization of high-performance displays.

Interfacial Engineering of In2Se3/h-BN/CsPb(Br/I)3 Heterostructure Photodetector and Its Application in Automatic Obstacle Avoidance System

Driven by the rapid development of autonomous vehicles, ultrasensitive photodetectors with high signal-to-noise ratio and ultraweak light detection capability are urgently needed. Due to its intriguing attributes, the emerging van der Waals material, indium selenide (In2Se3), has attracted extensive attention as an ultrasensitive photoactive material. However, the lack of an effective photoconductive gain mechanism in individual In2Se3 inhibits its further application. Herein, we propose a heterostructure photodetector consisting of an In2Se3 photoactive channel, a hexagonal boron nitride (h-BN) passivation layer, and a CsPb(Br/I)3 quantum dot gain layer. This device manifests a signal-to-noise ratio of 2 × 106 with responsivity of 2994 A/W and detectivity of 4.3 × 1014 Jones. Especially, it enables the detection of weak light as low as 0.03 μW/cm2. These performance characteristics are ascribed to the interfacial engineering. In2Se3 and CsPb(Br/I)3 with type-II band alignment promote the separation of photocarriers, while h-BN passivates the impurities on CsPb(Br/I)3 and promises a high-quality carrier transport interface. Furthermore, this device is successfully integrated into an automatic obstacle avoidance system, demonstrating promising application prospects in autonomous vehicles.

Modulating Resonance Energy Transfer with Supramolecular Control in a Layered Hybrid Perovskite and Chromium Photosensitizer Assembly

Recently, the low-dimensional organic-inorganic halide perovskites (OIHP) have been exploited heavily for their favorable exciton dynamics, broad-band emission, remarkable stability, and tunable band-edge excited-state energy compared to their 3D counterparts for potential optoelectronic applications. Low-dimensional perovskites are generally good candidates for utilization as room-temperature photoluminescence (PL) materials. Further, doping divalent transition metals like Mn²⁺ into OIHP is expected to introduce a ⁴T₁-⁶A₁-based low-energy luminescence emission around 600 nm; an optical property that is favorable for biomedical optoelectronics. Doping Mn²⁺ in the perovskite lattice is also expected to induce the generation of cytotoxic singlet oxygen species (¹O₂), a ROS that is being exploited for various therapeutic applications. To integrate these optical and therapeutic properties of a 2D (PEA)₂PbBr₄ (Pb PeV; PEA = phenylethylammonium cation) perovskite alloyed with Mn²⁺ ions (Mn:PbPeV) and the option for a photoinduced energy transfer process involving a Cr(III)-based ¹O₂ generating photosensitizer (CrPS), we designed a unique purpose-built nanoassembly (Mn:PbPeV@PCD) using the encapsulation properties of a water-soluble polymer derived from β-cyclodextrin (PCD). Here the PCD is observed to modulate the classical internal energy transfer of Pb²⁺ exciton to alloyed Mn²⁺ orange emission, resulting in the emergence of a new blue emission. The addition of CrPS into the Mn:PbPeV@PCD to generate the CrPS@Mn:PbPeV@PCD assembly results in restoring perovskite luminescence followed by the external energy transfer to CrPS. We have elucidated the mechanism of these cascade energy transfer processes between multiple components using steady-state and time-resolved luminescence techniques. Efficient ROS generation and its potential to induce an oxidation reaction of a biomolecule are realized using guanine as the target molecule. Further photoinduced cleavage studies with biomolecules confirmed the efficacy of the nanoassembly in inducing the cleavage of guanine-rich DNA. The study opens up a new direction in the field of perovskite for biomedical applications.

Continuous manufacturing of highly stable lead halide perovskite nanocrystals via a dual-reactor strategy

Lead halide perovskite nanocrystals possess incredible potential as next generation emitters due to their stellar set of optoelectronic properties. Unfortunately, their instability towards many ambient conditions and reliance on batch processing hinder their widespread utilities. Herein, we address both challenges by continuously synthesizing highly stable perovskite nanocrystals via integrating star-like block copolymer nanoreactors into a house-built flow reactor. Perovskite nanocrystals manufactured in this strategy display significantly enhanced colloidal, UV, and thermal stabilities over those synthesized with conventional ligands. Such scaling up of highly stable perovskite nanocrystals represents an important step towards their eventual use in many practical applications in optoelectronic materials and devices.

Water-Driven Synthesis of Deep-Blue Perovskite Colloidal Quantum Wells for Electroluminescent Devices

Perovskite colloidal quantum wells (QWs) are promising to realize narrow deep-blue emission, but the poor optical performance and stability suppress their practical application. Here, we creatively propose a water-driven synthesis strategy to obtain size-homogenized and strongly confined deep-blue CsPbBr₃ QWs, corresponding to three monolayers, which emit at the deep-blue wavelength of 456 nm. The water controls the orientation and distribution of the ligands on the surface of the nanocrystals, thus inducing orientated growth through the Ostwald ripening process by phagocytizing unstable nanocrystals to form well-crystallized QWs. These QWs present remarkable stability and high photoluminescence quantum yield of 94 %. Furthermore, we have prepared light-emitting diodes based on the QWs via the all-solution fabrication strategy, achieving an external quantum efficiency of 1 % and luminance of 2946 cd m^-2 , demonstrating state-of-the-art brightness for perovskite QW-based LEDs.

Supramolecular Framework Constructed by Dendritic Nanopolymer for Stable Flexible Perovskite Resistive Random-Access Memory

The 3D supramolecular framework (3D-SF) is constructed in this work through the hydrogen bond assisted self-assembly of spherical dendritic nanopolymer to regulate the flexibility, stability, and resistive switching (RS) performance of perovskite resistive random-access memory (RRAM). Herein, the 3D-SF network acts as the perovskite crystallization template to regulate the perovskite crystallization process due to its coordination interaction of functional groups with the perovskite grains, presenting the uniform, pinhole-free, and compact perovskite morphology for stable flexible RRAM. The 3D-SF network in situ stays at the perovskite intergranular boundaries to crosslink the perovskite grains. The RS performance of 3D-SF-modified perovskite RRAM device is evidently improved to the ON/OFF ratio of 10⁵ , the cycle number of 500 times, and the data retention time of 10⁴ s. The 50-days exposure of unencapsulated RRAM device at ambient environment still makes the ON/OFF ratio to be kept at ≈10⁴ , indicating the potential of long-term stable multilevel storage in the high-density data storage. The bending action under different radius also does not change the RS performance due to the excellent bending-resistant ability of 3D-SF-modified perovskite film. This work explores a novel polymer additive strategy to construct the 3D supramolecular framework for stable flexible perovskite optoelectronic devices.

Ultra-stable CsPbBr3@PbBrOH nanorods for fluorescence labeling application based on methylimidazole-assisted synthesis

The extension application of perovskites in aqueous media such as bioassays requires the development of a water-stable perovskite with a simple preparation process and low cost. However, the degradation of perovskites in aqueous solution is still a thorny problem. Here, we develop a methylimidazole-assisted two-step synthesis protocol to prepare CsPbBr₃@PbBrOH nanorods with superior water stability and remarkable optical properties at room temperature. The synergy of 2-methylimidazole (2-MIM), an N-donor ligand, with water can not only facilitate CsPbBr₃ formation and suppress CsPb₂Br₅ or Cs₄PbBr₆ formation, but also promote the formation of a PbBrOH shell capping CsPbBr₃. 2-MIM is ionized into 2-MIM^- in DMF and 2-MIM⁺ in water. They passivated the surface defects and changed the crystallization environment, leading to water-stable CsPbBr₃@PbBrOH. The obtained CsPbBr₃@PbBrOH nanorods can still maintain 91% PL intensity after being stored in water for more than 2 months. Furthermore, the CsPbBr₃@PbBrOH nanorods show excellent stability in polar solvents, water, and phosphate buffer solution in a wide pH range, as well as better thermal and irradiation stability. In addition, the CsPbBr₃@PbBrOH nanorods are further functionalized with polydopamine (PDA) for biomolecular immobilization and immunoassay studies. The resulting assay shows a detection limit of 0.003 ng mL^-1 for IgG detection, illustrating important progress towards expanding fluorescence labeling application of perovskite nanomaterials for immunoassays.

Synergy of Block Copolymers and Perovskites: Template Growth through Self-Assembly

Block copolymers (BCPs) have been widely used as templates to prepare nanostructures over the past few decades. Ordered nanostructures can be formed after microphase segregation of BCPs. In this context, the newly emerging BCP-templated perovskites, in which the perovskite crystal growth has been confined within a self-assembled BCP nanostructure due to the interaction between the polymer block and the cation of the perovskite, have shown profound optical performance and environmental stability. Considering the promising performance of BCP-templated perovskites, this Perspective comprehensively reviews recent works in which BCPs are used as templates with three-dimensional perovskites and perovskite quantum dots, and their performance and stability are thoroughly discussed. Lastly, their potential applications in optoelectronics and biology are discussed.

Necklace-Like Nanostructures: From Fabrication, Properties to Applications

The shape-controlled synthesis of nanocrystals remains a hot research topic in nanotechnology. Particularly, the fabrication of 1D structures such as wires, rods, belts, and tubes has been an interesting and important subject within nanoscience in the last few decades. 1D necklace-like micro/nanostructures are a sophisticated geometry that has attracted increasing attention due to their anisotropic and periodic structure, intrinsic high surface area, abundant transport channels, exposure of each component to the surface, and multiscale roughness of the surface. These characteristics enable their unique electrical, optical, and catalytic properties. This review provides a comprehensive summary of the advanced research progress on the fabrication strategies, novel properties, and various applications of necklace-like structures. It begins with the main fabrication methods of necklace-like structures and subsequently details a variety of their properties and applications. It concludes with the authors' perspectives on future research and development of the necklace-like structures.

Encapsulation of Dual-Passivated Perovskite Quantum Dots for Bio-Imaging

Due to their marvelous electrical and optical properties, perovskite nanocrystals have reached remarkable landmarks in solar cells, light-emitting diodes, and photodetectors. However, the intrinsic instability of ionic perovskites, which would undergo an undesirable phase transition and decompose rapidly in ambient humidity, limits their long-term practical deployment. To address this challenge, halogenated trimethoxysilane as the passivation additive is chosen, which utilizes simultaneous halide and silica passivation to enhance the stability of perovskite nanoparticles via a dual-passivation mechanism. The processable nanoparticles show high photoluminescence quantum yield, tunable fluorescence wavelength, and excellent resistance against air and water, highlighting great potential as green to deep-red bio-labels after further phospholipid encapsulation. This work demonstrates that the dual-passivation mechanism could be used to maintain the long-term stability of ionic crystals, which sheds light on the opportunity of halide perovskite nanoparticles for usage in a humid environment.

Alcohol-Stable Perovskite Nanocrystals and Their In Situ Capsulation with Polystyrene

In recent years, lead halide perovskite nanocrystals (PNCs) have presented potential scalable applications in all fields due to their outstanding properties. However, most commonly used PNCs capped with oleic acid (OA) and oleylamine (OAm) suffer from bad stability in polar solutions and thus require various surface protections with organic or inorganic materials. Encapsulation with highly hydrophobic polystyrene (PS) is one of the most efficient ways to protect PNCs; however, the presently used swelling-shrinking strategy faces several challenges, such as weak interaction between PS chains and the surface ligands in nonpolar media causing a low encapsulation efficiency, and serious aggregation of PS particles during the shrinkage process leading to very different particle sizes. Herein, alcohol-stable polyacrylic acid-capped CsPbBr3 PNCs (i.e., PAA-PNCs) are first synthesized and then in situ encapsulated with PS shells by polymerizing styrene monomer on the PNC surfaces in a polar organic solvent (e.g., ethanol). The in situ PS-encapsulated PAA-PNCs (i.e., PAA-PNCs@iPS) exhibit outstanding monodispersity, remarkable water, heat, and UV stability, high fluorescence activity, and color purity. The unique synthesis strategy and good performances of PAA-PNCs@iPS will boost the applications of PNCs in LEDs, biological imaging, and chemosensing.

Tailoring Charge Separation at Meticulously Engineered Conjugated Polymer/Perovskite Quantum Dot Interface for Photocatalyzing Atom Transfer Radical Polymerization

In stark contrast to conventional organic ligand-capped counterparts, the ability to create stable metal halide perovskite nanocrystals strongly tethered with conjugated polymers (CPs) represents an important endeavor toward tailoring charge carrier dynamics at their interface that critically underpins applications of this unique class of all semiconducting, organic-inorganic nanomaterials for optoelectronics. This, however, has yet to be largely explored. Herein, we report, for the first time, the unraveling of efficient charge separation at judiciously designed CP/perovskite quantum dot (QD) interface for photoinduced atom transfer radical polymerization (p-ATRP). Such scrutiny is rendered by in situ crafting an array of monodisperse, highly stable, CP-ligated perovskite QDs with precisely controlled dimensions of each constituent via capitalizing on unimolecular, amphiphilic starlike block copolymers as nanoreactors. The intimate and permanent surface tethering of CPs imparts remarkable thermal, photo, and polar solvent stabilities of CP-ligated perovskite QDs. More importantly, they manifest efficient interfacial charge separation with a profound dependence on the length of ligated CPs and the size of perovskite QDs. The outstanding structural stabilities and charge separation characteristic enable CP-ligated perovskite QDs as robust photocatalysts for p-ATRP of a wide selection of monomers with stable and controllable reaction kinetics, also depending crucially on the length of CPs and the size of perovskite QDs. In principle, an exciting variety of CP-ligated, uniform perovskite QDs with virtually unlimited material choice of both markedly improved stabilities and tunable electronic band alignments can be readily accessed by exploiting the amphiphilic starlike block copolymer nanoreactor strategy for use in photodetectors, sensors, and LEDs, among other areas.

Harnessing of Spatially Confined Perovskite Nanocrystals Using Polysaccharide-based Block Copolymer Systems

Metal halide perovskite nanocrystals (PVSK NCs) are generally unstable upon their transfer from colloidal dispersions to thin film devices. This has been a major obstacle limiting their widespread application. In this study, we proposed a new approach to maintain their exceptional optoelectronic properties during this transfer by dispersing brightly emitting cesium lead halide PVSK NCs in polysaccharide-based maltoheptaose-block-polyisoprene-block-maltoheptaose (MH-b-PI-b-MH) triblock copolymer (BCP) matrices. Instantaneous crystallization of ion precursors with favorable coordination to the sugar (maltoheptaose) domains produced ordered NCs with varied nanostructures of controlled domain size (≈10-20 nm). Confining highly ordered and low dimension PVSK NCs in polysaccharide-based BCPs constituted a powerful tool to control the self-assembly of BCPs and PVSK NCs into predictable structures. Consequently, the hybrid thin films exhibited excellent durability to humidity and stretchability with a relatively high PL intensity and photoluminescence quantum yield (>70%). Furthermore, stretchable phototransistor memory devices were produced and maintained with a good memory ratio of 10⁵ and exhibited a long-term memory retention over 10⁴ s at a high strain of 100%.

Zwitterionic Block Copolymers for the Synthesis and Stabilization of Perovskite Nanocrystals

Traditional hot injection methods for the preparation of cesium lead halide perovskite nanocrystals (CsPbX₃ PNCs, where X=Cl, Br, or I) rely on small molecule surfactants to produce PNCs with cube, plate, or rod-like morphologies. Here, we describe a new method whereby zwitterionic block copolymers are employed as macromolecular ligands in PNC synthesis, affording PNCs with excellent colloidal stability, high photoluminescence quantum yield, and in some cases distinctly non-cubic shapes. The block copolymers used in this study - composed of a poly(n-butyl methacrylate) hydrophobic block and zwitterionic methacrylate hydrophilic blocks - dissolve in useful solvents for PNC growth despite containing large mole percentages of zwitterionic groups. PNCs prepared with block copolymer ligands were found to disperse and retain their fluorescence in a range of polar organic solvents and were amenable to direct integration into optically transparent nanocomposite thin films with high PNC content.

Ultra-Stable CsPbX3 @Pyrophosphate Nanoparticles in Water over One Year

All-inorganic lead halide perovskite (CsPbX₃ , X = Cl, Br, I, or their mixture) nanocrystals (NCs) have achieved inspiring advancements in optoelectronic fields but still suffer from poor durability when exposed to environmental stimuli such as water, irradiation and heat. Herein, a strategy of employing pyrophosphate as the inert shell for CsPbX₃ NCs is reported. The strong binding between pyrophosphate and CsPbBr₃ surface can stabilize the perovskite structure well. The as-obtained core@shell CsPbBr₃ @NH₄ AlP₂ O₇ NCs exhibit impressive stability against water and maintain the initial optical properties with negligible change in 400 days. Furthermore, significant improvement of irradiation/thermal resistance is realized due to the protecting role of pyrophosphate. The NCs can retain 100% and ≈90% of the original PL after hundreds of heating/cooling cycles and several hundred hours of UV light irradiation, respectively. As a result, the core@shell products can be directly used for high-resolution inkjet printing, enabling the printed fluorescent information to be resistant under harsh environmental conditions. This work provides a promising way for the synthesis of highly stable encapsulated perovskite NCs and demonstrates a great potential in practical applications.

Highly Stable CsSnCl3 Quantum Dots Grown in an Ionic Liquid/Gelatin Composite System through an In Situ Method

Lead halide perovskite quantum dots (QDs) are controversial due to their high lead content. Tin, a low-toxic element with an outer electronic structure similar to that of Pb, becomes a strong candidate for preparing lead-free perovskite QDs. However, tin-based perovskite QDs, especially CsSnCl₃ QDs, exhibit poor environmental stability. Herein, we proposed an strategy for highly stable CsSnCl₃ QDs using an ionic liquid as a solvent and antioxidant and gelatin as a multidentate ligand and coating material through an in situ method ([AMIM]Cl/gelatin-QDs). The results showed that the abundant active groups of gelatin served as the nucleation growth center for QDs and further passivated QDs. At the same time, the long molecular chain of gelatin can coat the QDs to isolate the environment and fully protect QDs, and the size of QDs grown in gelatin was 5-10 nm. In addition, the oxidation resistance of ionic liquids and the halogen-rich environment formed also played an important role. Even if [AMIM]Cl/gelatin-QDs were treated with water and ultraviolet light simultaneously, its remaining fluorescence intensity was still above 60% within 72 h. Meaningfully, QDs endowed the composite system mildew resistance, which can resist the erosion of gelatin by molds, thereby realizing the system's long-term protection toward CsSnCl₃ QDs.

White-emitting film of diblock copolymer micelles with perovskite nanocrystals

Perovskite nanocrystals are synthesized in diblock copolymer micelles to improve their processability and stability. The copolymer micelle approach allows fluorescence from a stretchable or flexible substrate by coating processes, and stable emission in water by protecting the nanocrystals in the micelles. Fluorescent films in three primary colors of blue, green, and red are also produced with the assistance of anion exchange reactions for perovskite nanocrystals in the micelles. Then, by stacking films in three primary colors, we are able to produce a white-emitting film of copolymer micelles containing only perovskite nanocrystals without the support of other kinds of emissive materials.

A white-emitting film is produced by stacking films in three primary colors of diblock copolymer micelles containing perovskite nanocrystals without the support of other kinds of emissive materials.

Poly acrylic acid-b-polystyrene -passivated CsPbBr3 perovskite quantum dots with high photoluminescence quantum yield for light-emitting diodes

We reported a novel strategy for the preparation of CsPbBr3 perovskite quantum dots by polyacrylic acid-b-polystyrene ligands, which exhibited high stability and photoluminescence quantum yields. The fabricated white light-emitting diodesexhibited...

Highly Water-Stable Polymer-Perovskite Nanocomposites

The excellent performance of hybrid metal-halide perovskite nanocrystals (NCs) contrasts with their unsatisfactory stability in a high-humidity environment or water. Herein, polymer composite lead-halide perovskites (LHPs) NCs were prepared by casting or spin-coating to produce a high fluorescence yield and a fully water-resistant material. Poly(l-lactide) (PLla), polypropylene glycol (PPGly), and polysulfone (PSU) commercial polymers were used to prepare suspensions of MAPbBr₃-HDA NCs (MA: CH₃NH₃; HDA: hexadecylamine). The MAPbBr₃-HDA@PLla suspension exhibited a maximum fluorescence quantum yield of 93% compared to 43% for the pristine MAPbBr₃-HDA NCs. Strong emissions around 528 nm were also observed, with the same full width at half maximum value of 20 nm, demonstrating the successful fabrication of brightly luminescent LHP NCs@polymer combinations. Time-resolved photoluminescence measurements directly observed the enhanced spontaneous emission of the NCs induced by the polymeric environment. However, the cast films of MAPbBr₃-HDA NCs mixed with PLla or PPGly did not resist water immersion. On the contrary, MAPbBr₃-HDA@PPGly/PSU films containing well-dispersed ∼10 nm LHP NCs retained a bright green fluorescence emission even after 18 months under air conditions or water immersion up to 45 °C. From water contact angle measurements, profilometry, and X-ray photoelectron spectroscopy data, it could be assumed that the slightly hydrophobic PSU polymer is responsible for the high water stability of the fluorescent films, which avoids MAPbBr₃-HDA NC degradation. This work shows that the LHP NC dispersion in dissolved commodity polymers holds great promise toward the long-term stability of LHP NC composites for the future development of wearable electronic devices and other waterproof applications.

Encapsulation of lead halide perovskite nanocrystals (NCs) at the single-particle level: strategies and properties

Lead halide perovskite NCs (APbX₃, A = formamidinium (FA), methylammonium (MA) or Cs; X = Cl, Br, I or their mixture) have attracted unprecedented attention due to their excellent photophysical properties and wide application prospects. However, the inherent ionic structure of APbX₃ NCs makes them very sensitive to external conditions such as water and oxygen, resulting in poor stability. As a feasible strategy, encapsulation is considered to be effective in improving the stability. In this minireview, we focus on single-particle-level coating, which not only can improve the stability but also maintain the nano effect of the original NCs. This review summarizes the fundamental information on APbX₃ NCs and the necessity of single-particle-level coating. Subsequently, a variety of heterostructures at the single-particle level are introduced in detail. Then, their applications are summarized. Moreover, we discuss the challenges and prospects of the single-particle-level heterostructures based on APbX₃ NCs.

Polymerized Hybrid Perovskites with Enhanced Stability, Flexibility, and Lattice Rigidity

The intrinsic soft lattice nature of organometal halide perovskites (OHPs) makes them very tolerant to defects and ideal candidates for solution-processed optoelectronic devices. However, the soft lattice results in low stability towards external stresses such as heating and humidity, high density of phonons and strong electron-phonon coupling (EPC). Here, it is demonstrated that the OHPs with unsaturated 4-vinylbenzylammonium (VBA) as organoammonium cations can be polymerized without damaging the perovskite structure and its tolerance to defects. The polymerized perovskites show enhanced stability and flexibility compared to regular three-dimensional and two-dimensional (2D) perovskites. Furthermore, the polymerized 4-vinylbenzylammonium group improves perovskite lattice rigidity substantially, resulting in a reduced non-radiative recombination rate because of suppressed electron-phonon coupling, and enhanced carrier mobility because of suppressed phonon scattering. 2D polymerized perovskite light-emitting diodes (PeLEDs) with strong electroluminescence at room temperature, and quasi-2D PeLEDs with an external quantum efficiency (EQE) of 23.2% and enhanced operation stability are demonstrated. The work has opened a new way of enhancing the intrinsic stability and optoelectronic properties of OHPs.

Recent Advances in Synthesis, Properties, and Applications of Metal Halide Perovskite Nanocrystals/Polymer Nanocomposites

Metal halide perovskite nanocrystals (PNCs) have recently garnered tremendous research interest due to their unique optoelectronic properties and promising applications in photovoltaics and optoelectronics. Metal halide PNCs can be combined with polymers to create nanocomposites that carry an array of advantageous characteristics. The polymer matrix can bestow stability, stretchability, and solution-processability while the PNCs maintain their size-, shape- and composition-dependent optoelectronic properties. As such, these nanocomposites possess great promise for next-generation displays, lighting, sensing, biomedical technologies, and energy conversion. The recent advances in metal halide PNC/polymer nanocomposites are summarized here. First, a variety of synthetic strategies for crafting PNC/polymer nanocomposites are discussed. Second, their array of intriguing properties is examined. Third, the broad range of applications of PNC/polymer nanocomposites is highlighted, including light-emitting diodes (LEDs), lasers, and scintillators. Finally, an outlook on future research directions and challenges in this rapidly evolving field are presented.

In situ conversion from crew-cut to hairy micelles by surface-initiated polymerization

Whether spherical micelles of block copolymers have short or long coronas is intrinsically determined by the molecular weight of the corona-forming block with respect to that of the core block before the micelles are assembled. Because of the inherent conditions of packing copolymer chains into a micelle, the core diameter is altered when we assemble a micelle from a block copolymer having a long corona block, compared to that having a short corona block with the same length of the core block. However, micelles with the same core diameter but having various corona lengths can be guaranteed when the corona is extended upon surface-initiated polymerization on the micelles. Herein, we demonstrated in situ conversion from crew-cut to hairy micelles by selectively extending a corona block while maintaining the spherical shape of block copolymer micelles. We first synthesized block copolymers having a chain transfer agent (CTA) positioned at the end of the corona block and then assembled them into a crew-cut micelle. Employing this micelle as an assembly of macro-CTAs, we conducted surface-initiated polymerization on the micelle by photo-induced energy/electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. Since PET-RAFT enables the polymerization at room temperature, the corona block was selectively extended with preservation of the core diameter, thereby converting a crew-cut micelle to a hairy one. In addition, by applying the same polymerization protocol to a worm-like micelle, we could selectively extend the coronas, leading to the formation of a worm-like micelle with a long corona. If such copolymer chains were assembled into a micelle, we would obtain a spherical micelle instead of a worm-like micelle having a hairy corona, which is difficult to assess because of the inherent packing problem.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

In Situ Ambient Preparation of Perovskite-Poly(l-lactic acid) Phosphors for Highly Stable and Efficient Hybrid Light-Emitting Diodes

Metal halide perovskite (MHP)-based phosphor-converted light-emitting diodes (pc-LEDs) are limited by the low MHP stability under storage/operation conditions. A few works have recently established the in situ synthesis of MHPs into polymer matrices as an effective strategy to enhance the stability of MHP with a low-cost fabrication. However, this is limited to petrochemical-based polymers. Herein, the first in situ ambient preparation of highly luminescent and stable MHP-biopolymer filters (MAPbBr₃ nanocrystals as an emitter and poly(l-lactic acid) (PLLA) as the matrix) with arbitrary areas (up to ca. 300 cm²) is reported. The MAPbBr₃-PLLA phosphors feature a narrow emission (25 nm) with excellent photoluminescence quantum yields (>85%) and stability under ambient storage, water, and thermal stress. This is corroborated in green pc-LEDs featuring a low-efficiency roll-off, an excellent operational stability of ca. 600 h, and high luminous efficiencies of 65 lm W^-1 that stand out compared to the prior state of the art (e.g., an average lifetime of 200 h at 50 lm W^-1). The filters are further exploited to fabricate white-emitting pc-LEDs with efficiencies of ca. 73 lm W^-1 and x/y CIE color coordinates of 0.33/0.32. Overall, this work establishes a straightforward (one-pot/in situ) and low-cost preparation (ambient/room temperature) of highly efficient and stable MHP-biopolymer phosphors for highly performing and more sustainable lighting devices.

Dual-Protected Metal Halide Perovskite Nanosheets with an Enhanced Set of Stabilities

Approaches to achieve stable perovskite nanocrystals (PNCs) of interest, in particular those with large structural anisotropy, through protective coating of the inorganic shell at a single-nanocrystal (NC) level are comparatively few and limited in scope. Reported here is a robust amphiphilic-diblock-copolymer-enabled strategy for crafting highly-stable anisotropic CsPbBr₃ nanosheets (NSs) by in situ formation of a uniform inorganic shell (1st shielding) that is intimately ligated with hydrophobic polymers (2nd shielding). The dual-protected NSs display an array of remarkable stabilities (i.e., thermal, photostability, moisture, polar solvent, aliphatic amine, etc.) and find application in white-light-emitting diodes. In principle, by anchoring other multidentate amphiphilic polymer ligands on the surface of PNCs, followed by templated-growth of shell materials of interest, a rich variety of dual-shelled, multifunctional PNCs with markedly improved stabilities can be created for use in optics, optoelectronics, and sensory devices.

A Rapid and Robust Light-and-Solution-Triggered In Situ Crafting of Organic Passivating Membrane over Metal Halide Perovskites for Markedly Improved Stability and Photocatalysis

Despite intriguing optoelectronic attributes in solar cells, light-emitting diodes, and photocatalysis, the instability of organic-inorganic perovskites poises a grand challenge for long-term applications. Herein, we report a simple yet robust strategy via light-and-solution treatment to create an organic membrane that effectively passivates CH₃NH₃PbI₃ (MAPbI₃). Specifically, the restructuring of MA⁺ is observed on MAPbI₃ in aqueous hydrogen iodide. HIO₃ molecules are generated via the reaction between water and I₂ induced by photocatalysis when MAPbI₃ is illuminated. The hydrogen bonding between HIO₃ molecules at different perovskite particles not only directs the creeplike growth of perovskite particles but also in situ forms a passivating layer firmly anchoring on the perovskite surface with hydrophilic -NH₃⁺ groups tethering to perovskites and hydrophobic -CH₃ moieties exposed to air. Intriguingly, such MA⁺ film greatly improves the stability of perovskites against moisture as well as their crystal quality, considerably enhancing the photocatalytic hydrogen evolution rate.

Operando unraveling photothermal-promoted dynamic active-sites generation in NiFe2O4 for markedly enhanced oxygen evolution

The ability to develop highly active and low-cost electrocatalysts represents an important endeavor toward accelerating sluggish water-oxidation kinetics. Herein, we report the implementation and unraveling of the photothermal effect of spinel nanoparticles (NPs) on promoting dynamic active-sites generation to markedly enhance their oxygen evolution reaction (OER) activity via an integrated operando Raman and density functional theory (DFT) study. Specifically, NiFe₂O₄ (NFO) NPs are first synthesized by capitalizing on amphiphilic star-like diblock copolymers as nanoreactors. Upon the near-infrared light irradiation, the photothermal heating of the NFO-based electrode progressively raises the temperature, accompanied by a marked decrease of overpotential. Accordingly, only an overpotential of 309 mV is required to yield a high current density of 100 mA cm^-2, greatly lower than recently reported earth-abundant electrocatalysts. More importantly, the photothermal effect of NFO NPs facilitates surface reconstruction into high-active oxyhydroxides at lower potential (1.36 V) under OER conditions, as revealed by operando Raman spectroelectrochemistry. The DFT calculation corroborates that these reconstructed (Ni,Fe)oxyhydroxides are electrocatalytically active sites as the kinetics barrier is largely reduced over pure NFO without surface reconstruction. Given the diversity of materials (metal oxides, sulfides, phosphides, etc.) possessing the photo-to-thermal conversion, this effect may thus provide a unique and robust platform to boost highly active surface species in nanomaterials for a fundamental understanding of enhanced performance that may underpin future advances in electrocatalysis, photocatalysis, solar-energy conversion, and renewable-energy production.

Tailoring Optical Properties of Luminescent Semiconducting Nanocrystals through Hydrostatic, Anisotropic Static, and Dynamic Pressures

Luminescent semiconductor nanocrystals are a fascinating class of materials because of their size-dependent emissions. Numerous past studies have demonstrated that semiconductor nanoparticles with radii smaller than their Bohr radius experience quantum confinement and thus size-dependent emissions. Exerting pressure on these nanoparticles represents an additional, more dynamic, strategy to alter their size and shift their emission. The application of pressure results in the lattices becoming strained and the electronic structure altered. In this Minireview, colloidal semiconductor nanocrystals are first introduced. The effects of uniform hydrostatic pressure on the optical properties of metal halide perovskite (ABX₃ ), II-VI, III-V, and IV-VI semiconductor nanocrystals are then examined. The optical properties of semiconductor nanocrystals under static and dynamic anisotropic pressure are then summarized. Finally, future research directions and applications utilizing the pressure-dependent optical properties of semiconductor nanocrystals are discussed.

A hydrophobic polymer stabilized CsPbBr3 sensor for environmental pollutant detection

The detection of o-nitrophenol in the environment is of great significance to environmental protection.

Revealing Electrical-Poling-Induced Polarization Potential in Hybrid Perovskite Photodetectors

Despite recent rapid advances in metal halide perovskites for use in optoelectronics, the fundamental understanding of the electrical-poling-induced ion migration, accounting for many unusual attributes and thus performance in perovskite-based devices, remain comparatively elusive. Herein, the electrical-poling-promoted polarization potential is reported for rendering hybrid organic-inorganic perovskite photodetectors with high photocurrent and fast response time, displaying a tenfold enhancement in the photocurrent and a twofold decrease in the response time after an external electric field poling. First, a robust meniscus-assisted solution-printing strategy is employed to facilitate the oriented perovskite crystals over a large area. Subsequently, the electrical poling invokes the ion migration within perovskite crystals, thus inducing a polarization potential, as substantiated by the surface potential change assessed by Kelvin probe force microscopy. Such electrical-poling-induced polarization potential is responsible for the markedly enhanced photocurrent and largely shortened response time. This work presents new insights into the electrical-poling-triggered ion migration and, in turn, polarization potential as well as into the implication of the latter for optoelectronic devices with greater performance. As such, the utilization of ion-migration-produced polarization potential may represent an important endeavor toward a wide range of high-performance perovskite-based photodetectors, solar cells, transistors, scintillators, etc.

Polymer-Ligated Nanocrystals Enabled by Nonlinear Block Copolymer Nanoreactors: Synthesis, Properties, and Applications

The past several decades have witnessed substantial advances in synthesis and self-assembly of inorganic nanocrystals (NCs) due largely to their size- and shape-dependent properties for use in optics, optoelectronics, catalysis, energy conversion and storage, nanotechnology, and biomedical applications. Among various routes to NCs, the nonlinear block copolymer (BCP) nanoreactor technique has recently emerged as a general yet robust strategy for crafting a rich diversity of NCs of interest with precisely controlled dimensions, compositions, architectures, and surface chemistry. It is notable that nonlinear BCPs are unimolecular micelles, where each block copolymer arm of nonlinear BCP is covalently connected to a central core or polymer backbone. As such, their structures are static and stable, representing a class of functional polymers with complex architecture for directing the synthesis of NCs. In this review, recent progress in synthesizing NCs by capitalizing on two sets of nonlinear BCPs as nanoreactors are discussed. They are star-shaped BCPs for producing 0D spherical nanoparticles, including plain, hollow, and core-shell nanoparticles, and bottlebrush-like BCPs for creating 1D plain and core/shell nanorods (and nanowires) as well as nanotubes. As the surface of these NCs is intimately tethered with the outer blocks of nonlinear BCPs used, they can thus be regarded as polymer-ligated NCs (i.e., hairy NCs). First, the rational design and synthesis of nonlinear BCPs via controlled/living radical polymerizations is introduced. Subsequently, their use as the NC-directing nanoreactors to yield monodisperse nanoparticles and nanorods with judiciously engineered dimensions, compositions, and surface chemistry is examined. Afterward, the intriguing properties of such polymer-ligated NCs, which are found to depend sensitively on their sizes, architectures, and functionalities of surface polymer hairs, are highlighted. Some practical applications of these polymer-ligated NCs for energy conversion and storage and drug delivery are then discussed. Finally, challenges and opportunities in this rapidly evolving field are presented.