Water Oxidation Catalysts for Artificial Photosynthesis

Green light all the way: Triple modification synergistic modification effect to enhance the photoelectrochemical water oxidation performance of BiVO4 photoanode

The recombination of photogenerated electron-hole pairs of the photoanode seriously impairs the application of bismuth vanadate (BiVO4) in photoelectrochemical water splitting. To address this issue, we prepared a Yb:BiVO4/Co3O4/FeOOH composite photoanode by employing drop-casting and soaking methods to attach Co3O4/FeOOH cocatalysts to the surface of ytterbium-doped BiVO4. The prepared Yb:BiVO4/Co3O4/FeOOH photoanode demonstrates a high photocurrent density of 4.89 mA cm-2 at 1.23 V versus the reversible hydrogen electrode (RHE), which is 5.1 times that of bare BiVO4 (0.95 mA cm-2). Detailed characterization and testing demonstrated that Yb doping narrows the band gap and significantly enhances the carrier density. Furthermore, Co3O4 serves as a hole transfer layer to expedite hole migration and diminish recombination, while FeOOH offers additional active sites and minimizes surface trap states, thus boosting stability. The synergistic effects of Yb doping and Co3O4/FeOOH cocatalyst significantly improved the reaction kinetics and overall performance of PEC water oxidation. This work provides a strategy for designing efficient photoanodes for PEC water oxidation.

The Catalytic Mechanism of a Highly Active Cobalt Chlorin Complex for Photocatalytic Water Oxidation

Highly active catalysts for electrocatalytic and photocatalytic water oxidation are strongly demanded to realize artificial photosynthesis. A cobalt complex with a chlorin derivative ligand (CoII(Ch)) exhibited high activity for electrocatalytic water oxidation with an overpotential of 0.45 V at pH 9.0. Spectroelectrochemistry (UV-vis) unveiled the formation of two intermediates by successive one-electron oxidations. Also, the Pourbaix diagram depicted by the pH dependence of redox potentials indicated that the water oxidation proceeded after the oxidation of both the central cobalt ion and chlorin ligand with proton-coupled electron transfer (PCET). Then, the photocatalytic activity of CoII(Ch) was examined for water oxidation using [RuII(bpy)3]2+ (bpy: 2,2'-bipyridine) and S2O82- as a photosensitizer and a sacrificial electron acceptor, respectively. The turnover number, turnover frequency, and oxygen yield reached as high as 980, 5.2 s-1, and 98%, respectively, under optimized conditions. The O2-evolution rates increased in proportion to the square of the catalyst concentration in the reaction solution, suggesting that the formation of the O-O bond regarded as the rate-determining step of water oxidation proceeded by the interaction of two metal centers (I2M) mechanism in which two molecules of high-valent metal oxo or oxyl radical species react with each other.

Photocatalytic Mechanisms of Organic Thermally Activated Delayed Fluorescence Compounds

Reverse intersystem crossing (RISC) has become possible by minimizing the energy gap between the first excited singlet (S1) and triplet state (T1), which facilitates the thermally activated delayed fluorescence (TADF). Due to the small singlet-triplet energy gap, the S1 and T1 states exhibit comparable redox reactivity, leading organic TADF compounds to be potent photocatalysts. Here, we report such TADF compounds with multiple donor units designed as an efficient photocatalyst for the direct C(sp3)-H carbamoylation of saturated aza-heterocycles. The results obtained by photophysical investigations and chemical calculations confirm that both the S1 and T1 states are involved in the photocatalysis cycle, with the fast spin-flip from the S1 to triplet states being a crucial factor in the enhancement of catalytic performance. The findings will be beneficial for the design of novel, efficient organic photocatalysis with TADF characteristics and aid in the development of organic photocatalysis.

Toward Efficient Utilization of Photogenerated Charge Carriers in Photoelectrochemical Systems: Engineering Strategies from the Atomic Level to Configuration

Photoelectrochemical (PEC) systems are essential for solar energy conversion, addressing critical energy and environmental issues. However, the low efficiency in utilizing photogenerated charge carriers significantly limits overall energy conversion. Consequently, there is a growing focus on developing strategies to enhance photoelectrode performance. This review systematically explores recent advancements in PEC system modifications, spanning from atomic and nanoscopic levels to configuration engineering. We delve into the relationships between PEC structures, intrinsic properties, kinetics of photogenerated charge carriers, and their utilization. Additionally, we propose future directions and perspectives for developing more efficient PEC systems, offering valuable insights into potential innovations in the field.

Constructing Metal-Organic Framework Films with Adjustable Electronic Properties on Hematite Photoanode for Boosting Photogenerated Carrier Transport

Hematite (α-Fe2O3) has become a research hotspot in the field of photoelectrochemical water splitting (PEC-WS), but the low photogenerated carrier separation efficiency limits further application. The electronic structure regulation, such as element doping and organic functional groups with different electrical properties, is applied to alleviate the problems of poor electrical conductivity, interface defects, and band mismatch. Herein, α-Fe2O3 photoanodes are modified to regulate their electric structures and improve photogenerated carrier transport by the bimetallic metal-organic frameworks (MOFs), which are constructed with Fe/Ni and terephthalate (BDC) with 2-substitution of different organic functional groups (─H, ─Br, ─NO2 and ─NH2). The α-Fe2O3 photoanode loaded with FeNi-NH2BDC MOF catalyst exhibits the optimal photocurrent density (2 mA cm-2) at 1.23 VRHE, which is 2.33 times that of the pure α-Fe2O3 photoanode. The detailed PEC analyses demonstrate that the bimetallic synergistic effect between Fe and Ni can improve the conductivity and inhibit the photogenerated carrier recombination of α-Fe2O3 photoanodes. The ─NH2 group as an electron-donor group can effectively regulate the electron distribution and band structure of α-Fe2O3 photoanodes to prolong the lifetime of photogenerated holes, which facilitates photogenerated carrier transport and further enhances the PEC-WS performance of α-Fe2O3 photoanode.

A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.

Photodynamic therapy of severe hemorrhagic shock on yolk-shell MoS2 nanoreactors

Ischemia-reperfusion injury resulting from severe hemorrhagic shock continues to cause substantial damage to human health and impose a significant economic burden. In this study, we designed an Au-loaded yolk-shell MoS2 nanoreactor (Au@MoS2) that regulates cellular homeostasis. In vitro experiments validated the efficacy of the nanomaterial in reducing intracellular reactive oxygen species (ROS) production during hypoxia and reoxygenation, and had great cell biocompatibility, Au@MoS2. The antioxidant properties of the nanoreactors contributed to the elimination of ROS (over twofold scavenging ratio for ROS). In vivo results demonstrate that Au@MoS2 (54.88% of reduction) alleviates hyperlactatemia and reduces ischemia-reperfusion injury in rats subjected to severe hemorrhagic shock, compared to MoS2 (26.32% of reduction) alone. In addition, no discernible toxic side effects were observed in the rats throughout the experiment, underscoring the considerable promise of the nanoreactor for clinical trials. The mechanism involves catalyzing the degradation of endogenous lactic acid on the Au@MoS2 nanoreactor under 808 nm light, thereby alleviating ischemia-reperfusion injury. This work proposes a new selective strategy for the treatment of synergistic hemorrhagic shock.

Synthetic Mn3Ce2O5-Cluster Mimicking the Oxygen-Evolving Center in Photosynthesis

The photosynthetic oxygen-evolving center (OEC) is a unique Mn4CaO5-cluster that catalyses water splitting into electrons, protons, and dioxygen. Precisely structural and functional mimicking of the OEC is a long-standing challenge and pressingly needed for understanding the structure-function relationship and catalytic mechanism of O-O bond formation. Herein we report two simple and robust artificial Mn3Ce2O5-complexes that display a remarkable structural similarity to the OEC in regarding of the ten-atom core (five metal ions and five oxygen bridges) and the alkyl carboxylate peripheral ligands. This Mn3Ce2O5-cluster can catalyse the water-splitting reaction on the surface of ITO electrode. These results clearly show that cerium can structurally and functionally replace both calcium and manganese in the cluster. Mass spectroscopic measurements demonstrate that the oxide bridges in the cluster are exchangeable and can be rapidly replaced by the isotopic oxygen of H2 18O in acetonitrile solution, which supports that the oxide bridge(s) may serve as the active site for the formation of O-O bond during the water-splitting reaction. These results would contribute to our understanding of the structure-reactivity relationship of both natural and artificial clusters and shed new light on the development of efficient water-splitting catalysts in artificial photosynthesis.

Highly Efficient Photoelectrochemical Alkene Epoxidation on a Dye-Sensitized Photoanode

In photoelectrochemical (PEC) cells, selective oxidation of organic substrates coupled with hydrogen evolution represents a promising approach for value-added chemical production and solar energy conversion. In this study, we report on PEC epoxidation of alkenes at a ruthenium dye-sensitized photoanode in a CH3CN/H2O mixed solvent with LiBr as a mediator and water as the oxygen source. The dye-sensitized photoanode was found to exhibit significant advantages in the simultaneous improvement of charge separation and suppression of charge recombination. First, LiBr as a redox mediator plays a critical role in charge separation, leading to an excellent excited electron injection efficiency of 95% and a high dye regeneration efficiency of 87%. Second, the predominant charge recombination pathway on the dye-sensitized photoanode is efficiently blocked by the reaction between alkene and the in situ generated bromine oxidant. As a result, the current system achieved a remarkable photocurrent density of over 4 mA cm-2 with a record-high incident photo-to-current efficiency (IPCE) of 51% and extraordinary selectivity of up to 99% for the epoxidation of a wide range of alkenes. Meanwhile, nearly 100% Faradaic efficiency for hydrogen evolution was obtained. The performance shown here exceeds that obtained by metal oxide-based semiconductor photoanodes under comparable conditions, demonstrating the great potential of dye-sensitized photoelectrodes for organic synthesis owing to their diversity and tunability.

Manipulating the Rate and Overpotential for Electrochemical Water Oxidation: Mechanistic Insights for Cobalt Catalysts Bearing Noninnocent Bis(benzimidazole)pyrazolide Ligands

Electrochemical water oxidation is known as the anodic reaction of water splitting. Efficient design and earth-abundant electrocatalysts are crucial to this process. Herein, we report a family of catalysts (1-3) bearing bis(benzimidazole)pyrazolide ligands (H 2 L1-H 2 L3). H 2 L3 contains electron-donating substituents and noninnocent components, resulting in catalyst 3 exhibiting unique performance. Kinetic studies show first-order kinetic dependence on [3] and [H2O] under neutral and alkaline conditions. In contrast to previously reported catalyst 1, catalyst 3 exhibits an insignificant kinetic isotope effect of 1.25 and zero-order dependence on [NaOH]. Based on various spectroscopic methods and computational findings, the L3Co2 III(μ-OH) species is proposed to be the catalyst resting state and the nucleophilic attack of water on this species is identified as the turnover-limiting step of the catalytic reaction. Computational studies provided insights into how the interplay between the electronic effect and ligand noninnocence results in catalyst 3 acting via a different reaction mechanism. The variation in the turnover-limiting step and catalytic potentials of species 1-3 leads to their catalytic rates being independent of the overpotential, as evidenced by Eyring analysis. Overall, we demonstrate how ligand design may be utilized to retain good water oxidation activity at low overpotentials.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

Supramolecular catalyst with [FeCl4] unit boosting photoelectrochemical seawater splitting via water nucleophilic attack pathway

Propelled by the structure of water oxidation co-catalysts in natural photosynthesis, molecular co-catalysts have long been believed to possess the developable potential in artificial photosynthesis. However, the interfacial complexity between light absorber and molecular co-catalyst limits its structural stability and charge transfer efficiency. To overcome the challenge, a supramolecular scaffold with the [FeCl4] catalytic units is reported, which undergo a water-nucleophilic attack of the water oxidation reaction, while the supramolecular matrix can be in-situ grown on the surface of photoelectrode through a simple chemical polymerization to be a strongly coupled interface. A well-defined BiVO4 photoanode hybridized with [FeCl4] units in polythiophene reaches 4.72 mA cm-2 at 1.23 VRHE, which also exhibits great stability for photoelectrochemical seawater splitting due to the restraint on chlorine evolution reaction by [FeCl4] units and polythiophene. This work provides a novel solution to the challenge of the interface charge transfer of molecular co-catalyst hybridized photoelectrode.

An artificial metalloenzyme that can oxidize water photocatalytically: design, synthesis, and characterization

In nature, light-driven water oxidation (WO) catalysis is performed by photosystem II via the delicate interplay of different cofactors positioned in its protein scaffold. Artificial systems for homogeneous photocatalytic WO are based on small molecules that often have limited solubility in aqueous solutions. In this work, we alleviated this issue and present a cobalt-based WO-catalyst containing artificial metalloenzyme (ArM) that is active in light-driven, homogeneous WO catalysis in neutral-pH aqueous solutions. A haem-containing electron transfer protein, cytochrome B5 (CB5), served to host a first-row transition-metal-based WO catalyst, CoSalen (CoIISalen, where H2Salen = N,N'-bis(salicylidene)ethylenediamine), thus producing an ArM capable of driving photocatalytic WO. The CoSalen ArM formed a water-soluble pre-catalyst in the presence of [Ru(bpy)3](ClO4)2 as photosensitizer and Na2S2O8 as the sacrificial electron acceptor, with photocatalytic activity similar to that of free CoSalen. During photocatalysis, the CoSalen-protein interactions were destabilized, and the protein partially unfolded. Rather than forming tens of nanometer sized CoOx nanoparticles as free CoSalen does under photocatalytic WO conditions, the CB5 : CoSalen ArM showed limited protein cross-linking and remained soluble. We conclude that a weak, dynamic interaction between a soluble cobalt species and apoCB5 was formed, which generated a catalytically active adduct during photocatalysis. A detailed analysis was performed on protein stability and decomposition processes during the harsh oxidizing reaction conditions of WO, which will serve for the future design of WO ArMs with improved activity and stability.

Electronic structure modulation of Mo sites in anion and cation co-doped MoO2 nanospheres for electrocatalytic water oxidation

Herein, we synthesized a type of anion/cation co-doped MoO2 nanosphere as an efficient OER catalyst. The optimized Ni/N-MoO2 exhibited a lower overpotential of 270 mV at 10 mA cm-2 in 24 h. This work provides a unique direction for the synthesis of efficient and stable MoO2-based electrocatalysts for water splitting.

Artificial Surface Electron Network Prompted Energy Band Structure Tuning: Boosting Solar-to-Hydrogen Evolution Performance

The energy gap and conduction band position of catalysts play crucial roles in solar-to-hydrogen (STH) transformation technology. Unfortunately, although an increase in the conduction band position can effectively promote the photoreduction capacity of the photocatalyst, it will inevitably widen the band gap, thus reducing the light-absorption scale. It seems that there is a contradiction between the reduction of band gap and the improvement of conduction band position, which is that "You can't have your cake and eat it too." Herein, an ultrasimple molecular adsorption strategy was engineered by adsorbing hydrazine hydrate on the surface of TiO2. The theoretical and experimental results indicated that the strong electron-donating effect of amino groups in hydrazine hydrate can promote the redistribution of photogenerated electrons and form surface electron networks on the surface of TiO2 photocatalysts, which can bend the conduction band upward and significantly improve its photoreduction ability. Besides, the adsorption of -NH2 can narrow the band gap width of TiO2 and promote the separation efficiency of photogenerated carriers. More interestingly, it can also effectively enhance the adsorption of H2O and H+, thus greatly elevating the STH efficiency. The STH rate of the as-prepared T-N-3 can be increased by ≈530%. This work sheds light on a new approach for resolving the contradiction between photoreduction and light absorption capabilities to effectively enhance photocatalytic performance.

The Emergence of High-Performance Conjugated Polymer/Inorganic Semiconductor Hybrid Photoelectrodes for Solar-Driven Photoelectrochemical Water Splitting

Solar-driven photoelectrochemical (PEC) energy conversion holds great potential in converting solar energy into storable and transportable chemicals or fuels, providing a viable route toward a carbon-neutral society. Conjugated polymers are rapidly emerging as a new class of materials for PEC water splitting. They exhibit many intriguing properties including tunable electronic structures through molecular engineering, excellent light harvesting capability with high absorption coefficients, and facile fabrication of large-area thin films via solution processing. Recent advances have indicated that integrating rationally designed conjugated polymers with inorganic semiconductors is a promising strategy for fabricating efficient and stable hybrid photoelectrodes for high-efficiency PEC water splitting. This review introduces the history of developing conjugated polymers for PEC water splitting. Notable examples of utilizing conjugated polymers to broaden the light absorption range, improve stability, and enhance the charge separation efficiency of hybrid photoelectrodes are highlighted. Furthermore, key challenges and future research opportunities for further improvements are also presented. This review provides an up-to-date overview of fabricating stable and high-efficiency PEC devices by integrating conjugated polymers with state-of-the-art semiconductors and would have significant implications for the broad solar-to-chemical energy conversion research.

Controlled Growth of WO3 Photoanode under Various pH Conditions for Efficient Photoelectrochemical Performance

Herein, the effects of the precursor solution's acidity level on the crystal structure, morphology, nucleation, and growth of WO3·nH2O and WO3 nanostructures are reported. Structural investigations on WO3·nH2O using X-ray diffraction and Fourier-transform infrared spectroscopy confirm that the quantity of hydrate groups increases due to the interaction between H+ and water molecules with increasing HCl volume. Surface analysis results support our claim that the evolution of grain size, surface roughness, and growth direction on WO3·nH2O and WO3 nanostructures rely on the precursor solution's pH value. Consequently, the photocurrent density of a WO3 photoanode using a HCl-5 mL sample achieves the best results with 0.9 mA/cm2 at 1.23 V vs. a reversible hydrogen electrode (RHE). We suggest that the improved photocurrent density of the HCl-5 mL sample is due to the efficient light absorption from the densely grown WO3 nanoplates on a substrate and that its excellent charge transport kinetics originate from the large surface area, low charge transfer resistance, and fast ion diffusion through the photoanode/electrolyte interface.

Role of excited-state hydrogen bonding in CO2 photoreduction catalyzed by sodium magnesium chlorophyll

In this paper, we report a joint experimental and computational study to elaborate the mechanism for the photocatalytic CO2 reduction reaction (CO2RR). Experimental results indicate that the catalyst (sodium magnesium chlorophyll, MgChlNa2), which has a well-defined structure for calculation and understanding, can achieve the photoreduction of CO2 to CO only using water as a dispersant, without adding any photosensitizer or sacrificial agent. Subsequently, a series of structural models of the hydrogen-bonded complexes of the catalyst were constructed and outlined via utilizing density functional theory (DFT) calculations, including photophysical and photochemical processes. The results confirm that the rate-limiting step of the whole CO2RR was the intersystem crossing process. The electron and proton transfers involved in photophysical and photochemical processes are induced by hydrogen bonds in the excited states. The combination of experiments and calculations will provide an important reference for the design of high-efficiency photocatalysts in the photocatalytic CO2RR.

Heterogeneous Electrocatalytic Oxygen Evolution Reaction by a Sol-Gel Electrode with Entrapped Na3 [Ru2 (μ-CO3 )4 ]: The Effect of NaHCO3

The Na3 [Ru2 (μ-CO3 )4 ] complex is acting as a water oxidation catalyst in a homogeneous system. Due to the significance of heterogeneous systems and the effect of bicarbonate on the kinetic, we studied the bicarbonate effect on the heterogeneous electrocatalyst by entrapping the Na3 [Ru2 (μ-CO3 )4 ] complex in a sol-gel matrix. We have developed two types of sol-gel electrodes, which differ by the precursor, and are demonstrating their stability over a minimum of 200 electrochemical cycles. The pH increases affected the currents and kcat for both types of electrodes, and their hydrophobicity, which was obtained from the precursor type, influenced the electrocatalytic process rate. The results indicate that NaHCO3 has an important role in the catalytic activity of the presented heterogeneous systems; without NaHCO3 , the diffusing species is probably OH- , which undergoes diffusion via the Grotthuss mechanism. To the best of our knowledge, this is the first study to present a simple and fast one-step entrapment process for the Na3 [Ru2 (μ-CO3 )4 ] complex by the sol-gel method under standard laboratory conditions. The results contribute to optimizing the WSP, ultimately helping expand the usage of hydrogen as a green and more readily available energy source.

Perovskite-Solar-Cell-Powered Integrated Fuel Conversion and Energy-Storage Devices

Metal halide hybrid perovskite solar cells (PSCs) have received considerable attention over the past decade owing to their potential for low-cost, solution-processable, earth-abundant, and high-performance superiority, increasing power conversion efficiencies of up to 25.7%. Solar energy conversion into electricity is highly efficient and sustainable, but direct utilization, storage, and poor energy diversity are difficult to achieve, resulting in a potential waste of resources. Considering its convenience and feasibility, converting solar energy into chemical fuels is regarded as a promising pathway for boosting energy diversity and expanding its utilization. In addition, the energy conversion-storage integrated system can efficiently sequentially capture, convert, and store energy in electrochemical energy storage devices. However, a comprehensive overview focusing on PSC-self-driven integrated devices with a discussion of their development and limitations remains lacking. Here, focus is on the development of representative configurations of emerging PSC-based photo-electrochemical devices including self-charging power packs, unassisted solar water splitting/CO2 reduction. The advanced progresses in this field, including configuration design, key parameters, working principles, integration strategies, electrode materials, and their performance evaluations are also summarized. Finally, scientific challenges and future perspectives for ongoing research in this field are presented.

Transition from Sequential to Concerted Proton-Coupled Electron Transfer of Water Oxidation on Semiconductor Photoanodes

Accelerating proton transfer has been demonstrated as key to boosting water oxidation on semiconductor photoanodes. Herein, we study proton-coupled electron transfer (PCET) of water oxidation on five typical photoanodes [i.e., α-Fe2O3, BiVO4, TiO2, plasmonic Au/TiO2, and nickel-iron oxyhydroxide (Ni1-xFexOOH)-modified silicon (Si)] by combining the rate law analysis of H2O molecules with the H/D kinetic isotope effect (KIE) and operando spectroscopic studies. An unexpected and universal half-order kinetics is observed for the rate law analysis of H2O, referring to a sequential proton-electron transfer pathway, which is the rate-limiting factor that causes the sluggish water oxidation performance. Surface modification of the Ni1-xFexOOH electrocatalyst is observed to break this limitation and exhibits a normal first-order kinetics accompanied by much enhanced H/D KIE values, facilitating the turnover frequency of water oxidation by 1 order of magnitude. It is the first time that Ni1-xFexOOH is found to be a PCET modulator. The rate law analysis illustrates an effective strategy for modulating PCET kinetics of water oxidation on semiconductor surfaces.

Tailoring the Atomic-Local Environment of Carbon Nanotube Tips for Selective H2 O2 Electrosynthesis at High Current Densities

The atomic-local environment of catalytically active sites plays an important role in tuning the activity of carbon-based metal-free electrocatalysts (C-MFECs). However, the rational regulation of the environment is always impeded by synthetic limitations and insufficient understanding of the formation mechanism of the catalytic sites. Herein, the possible cleavage mechanism of carbon nanotubes (CNTs) through the crossing points during ball-milling is proposed, resulting in abundant CNT tips that are more susceptible to be modified by heteroatoms, achieving precise modulation of the atomic environment at the tips. The obtained CNTs with N,S-rich tips (N,S-TCNTs) exhibit a wide potential window of 0.59 V along with H2 O2 selectivity for over 90.0%. Even using air as the O2 source, the flow cell system with N,S-TCNTs catalyst attains high H2 O2 productivity up to 30.37 mol gcat. -1  h-1 @350 mA cm-2 , superior to most reported C-MFECs. From a practical point of view, a solid electrolyzer based on N,S-TCNTs is further employed to realize the in-situ continuous generation of pure H2 O2 solution with high productivity (up to 4.35 mmol cm-2  h-1 @300 mA cm-2 ; over 300 h). The CNTs with functionalized tips hold great promise for practical applications, even beyond H2 O2 generation.

Perovskite BaTaO2 N: From Materials Synthesis to Solar Water Splitting

Barium tantalum oxynitride (BaTaO2 N), as a member of an emerging class of perovskite oxynitrides, is regarded as a promising inorganic material for solar water splitting because of its small band gap, visible light absorption, and suitable band edge potentials for overall water splitting in the absence of an external bias. However, BaTaO2 N still exhibits poor water-splitting performance that is susceptible to its synthetic history, surface states, recombination process, and instability. This review provides a comprehensive summary of previous progress, current advances, existing challenges, and future perspectives of BaTaO2 N for solar water splitting. A particular emphasis is given to highlighting the principles of photoelectrochemical (PEC) water splitting, classic and emerging photocatalysts for oxygen evolution reactions, and the crystal and electronic structures, dielectric, ferroelectric, and piezoelectric properties, synthesis routes, and thin-film fabrication of BaTaO2 N. Various strategies to achieve enhanced water-splitting performance of BaTaO2 N, such as reducing the surface and bulk defect density, engineering the crystal facets, tailoring the particle morphology, size, and porosity, cation doping, creating the solid solutions, forming the heterostructures and heterojunctions, designing the photoelectrochemical cells, and loading suitable cocatalysts are discussed. Also, the avenues for further investigation and the prospects of using BaTaO2 N in solar water splitting are presented.

Reactivities and Electronic Structures of μ-1,2-Peroxo and μ-1,2-Superoxo CoIIICoIII Complexes: Electrophilic Reactivity and O2 Release Induced by Oxidation

Peroxo complexes are key intermediates in water oxidation catalysis (WOC). Cobalt plays an important role in WOC, either as oxides CoOx or as {CoIII(μ-1,2-peroxo)CoIII} complexes, which are the oldest peroxo complexes known. The oxidation of {CoIII(μ-1,2-peroxo)CoIII} complexes had usually been described to form {CoIII(μ-1,2-superoxo)CoIII} complexes; however, recently the formation of {CoIV(μ-1,2-peroxo)CoIII} species were suggested. Using a bis(tetradentate) dinucleating ligand, we present here the synthesis and characterization of {CoIII(μ-1,2-peroxo)(μ-OH)CoIII} and {CoIII(μ-OH)2CoIII} complexes. Oxidation of {CoIII(μ-1,2-peroxo)(μ-OH)CoIII} at -40 °C in CH3CN provides the stable {CoIII(μ-1,2-superoxo)(μ-OH)CoIII} species and activates electrophilic reactivity. Moreover, {CoIII(μ-1,2-peroxo)(μ-OH)CoIII} catalyzes water oxidation, not molecularly but rather via CoOx films. While {CoIII(μ-1,2-peroxo)(μ-OH)CoIII} can be reversibly deprotonated with DBU at -40 °C in CH3CN, {CoIII(μ-1,2-superoxo)(μ-OH)CoIII} undergoes irreversible conversions upon reaction with bases to a new intermediate that is also the decay product of {CoIII(μ-1,2-superoxo)(μ-OH)CoIII} in aqueous solution at pH > 2. Based on a combination of experimental methods, the new intermediate is proposed to have a {CoII(μ-OH)CoIII} core formed by the release of O2 from {CoIII(μ-1,2-superoxo)(μ-OH)CoIII} confirmed by a 100% yield of O2 upon photocatalytic oxidation of {CoIII(μ-1,2-peroxo)(μ-OH)CoIII}. This release of O2 by oxidation of a peroxo intermediate corresponds to the last step in molecular WOC.

Low Catalyst Loading Enhances Charge Accumulation for Photoelectrochemical Water Splitting

Solar water oxidation is a critical step in artificial photosynthesis. Successful completion of the process requires four holes and releases four protons. It depends on the consecutive accumulation of charges at the active site. While recent research has shown an obvious dependence of the reaction kinetics on the hole concentrations on the surface of heterogeneous (photo)electrodes, little is known about how the catalyst density impacts the reaction rate. Using atomically dispersed Ir catalysts on hematite, we report a study on how the interplay between the catalyst density and the surface hole concentration influences the reaction kinetics. At low photon flux, where surface hole concentrations are low, faster charge transfer was observed on photoelectrodes with low catalyst density compared to high catalyst density; at high photon flux and high applied potentials, where surface hole concentrations are moderate or high, slower surface charge recombination was afforded by low-density catalysts. The results support that charge transfer between the light absorber and the catalyst is reversible; they reveal the unexpected benefits of low-density catalyst loading in facilitating forward charge transfer for desired chemical reactions. It is implied that for practical solar water splitting devices, a suitable catalyst loading is important for maximized performance.

Nanoscale Janus Z-Scheme Heterojunction for Boosting Artificial Photosynthesis

Artificial photosynthesis for CO2 reduction coupled with water oxidation currently suffers from low efficiency due to inadequate interfacial charge separation of conventional Z-scheme heterojunctions. Herein, an unprecedented nanoscale Janus Z-scheme heterojunction of CsPbBr3 /TiOx is constructed for photocatalytic CO2 reduction. Benefitting from the short carrier transport distance and direct contact interface, CsPbBr3 /TiOx exhibits significantly accelerated interfacial charge transfer between CsPbBr3 and TiOx (8.90 × 108 s-1 ) compared with CsPbBr3 :TiOx counterpart (4.87 × 107 s-1 ) prepared by traditional electrostatic self-assembling. The electron consumption rate of cobalt doped CsPbBr3 /TiOx can reach as high as 405.2 ± 5.6 µmol g-1 h-1 for photocatalytic CO2 reduction to CO coupled with H2 O oxidation to O2 under AM1.5 sunlight (100 mW cm-2 ), over 11-fold higher than that of CsPbBr3 :TiOx , and surpassing the reported halide-perovskite-based photocatalysts under similar conditions. This work provides a novel strategy to boost charge transfer of photocatalysts for enhancing the performance of artificial photosynthesis.

Reaction between Nickel Hydroxide and Cerium(IV) Ammonium Nitrate in Aqueous Solution

Cerium(IV) ammonium nitrate (CAN) has been extensively used as a sacrificial oxidant to study water-oxidation catalysts (WOCs). Although nickel hydroxide has been extensively investigated as WOCs, the water-oxidation reaction (WOR) and mechanistic studies in the presence of CAN and nickel hydroxide were rarely performed. Herein, using in situ Raman spectroscopy, in situ X-ray absorption spectroscopy, and in situ electron paramagnetic resonance spectroscopy, WOR in the presence of CAN and β-Ni(OH)₂ was investigated. The proposed WOR mechanism involves the oxidation of β-Ni(OH)₂ by CAN, leading to the formation of γ-NiO(OH). γ-NiO(OH), in the presence of acidic conditions, evolves oxygen and is reduced to Ni(II). In other words, the role of β-Ni(OH)₂ is the storage of four oxidizing equivalents by CAN, and then a four-electron reaction could result in a WOR with low activation energy. β-Ni(OH)₂ in CAN at concentrations of 0.10 M shows WOR with a maximum turnover frequency and a turnover number (for 1000 s) of 5.5 × 10^-5/s and 2.0 × 10^-2 mol (O₂)/mol(Ni), respectively. In contrast to β-Ni(OH)₂, Ni(OH₂)₆²⁺ (aq) could not be oxidized to γ-NiO(OH). Indeed, Ni(OH₂)₆²⁺ (aq) is the decomposition product of β-Ni(OH)₂/CAN.

Iridium-Complexed Dipyridyl-Pyridazine Organosilica as a Catalyst for Water Oxidation

The heterogenization of metal-complex catalysts to be applied in water oxidation reactions is a currently growing field of great scientific impact for the development of energy conversion devices simulating the natural photosynthesis process. The attachment of IrCp*Cl complexes to the dipyridyl-pyridazine N-chelating sites on the surface of SBA-15 promotes the formation of metal bipyridine-like complexes, which can act as catalytic sites in the oxidation of water to dioxygen, the key half-reaction of artificial photosynthetic systems. The efficiency of the heterogeneous catalyst, Ir@NdppzSBA, in cerium(IV)-driven water oxidation was thoroughly evaluated, achieving high catalytic activity even at a long reaction time. The reusability and stability were also examined after three reaction cycles, with a slight loss of activity. A comparison with an analogous homogeneous iridium catalyst revealed the enhanced durability and performance of the heterogeneous system based on the Ir@NdppzSBA catalyst due to the stability of the SBA-15 structure as well as the isolated metal active sites. Thereby, this new versatile synthesis route for the preparation of water oxidation catalysts opens a new avenue for the construction of alternative heterogeneous catalytic systems with high surface area, ease of functionalization, and facile separation to improve the efficiency in the water oxidation reaction.

Artificial Photosynthesis: Current Advancements and Future Prospects

Artificial photosynthesis is a technology with immense potential that aims to emulate the natural photosynthetic process. The process of natural photosynthesis involves the conversion of solar energy into chemical energy, which is stored in organic compounds. Catalysis is an essential aspect of artificial photosynthesis, as it facilitates the reactions that convert solar energy into chemical energy. In this review, we aim to provide an extensive overview of recent developments in the field of artificial photosynthesis by catalysis. We will discuss the various catalyst types used in artificial photosynthesis, including homogeneous catalysts, heterogeneous catalysts, and biocatalysts. Additionally, we will explore the different strategies employed to enhance the efficiency and selectivity of catalytic reactions, such as the utilization of nanomaterials, photoelectrochemical cells, and molecular engineering. Lastly, we will examine the challenges and opportunities of this technology as well as its potential applications in areas such as renewable energy, carbon capture and utilization, and sustainable agriculture. This review aims to provide a comprehensive and critical analysis of state-of-the-art methods in artificial photosynthesis by catalysis, as well as to identify key research directions for future advancements in this field.

Investigation of quinone reduction by microalgae using fluorescence - do "lake" and "puddle" mechanisms matter?

Photosynthesis is a fundamental process used by Nature to convert solar energy into chemical energy. For the last twenty years, many solutions have been explored to provide electrical power from the photosynthetic chain. In this context, the coupling between microalgae and exogenous quinones is an encouraging strategy because of the capability of quinones to be reduced by the photosynthetic chain. The ability of a quinone to be a good or bad electron acceptor can be evaluated by fluorescence measurements. Fluorescence analyses are thus a convenient tool helping to define a diverting parameter for some quinones. However, this parameter is implicitly designed on the basis of a particular light capture mechanism by algae. In this paper, we propose to revisit previous fluorescence experimental data by considering the two possible mechanisms (lake vs. puddle) and discussing their implication on the conclusions of the analysis. In particular, we show that the maximum extraction efficiency depends on the mechanism (in the case of 2,6-dichlorobenzoquinone - 2,6-DCBQ, (0.45 ± 0.02) vs (0.61 ± 0.03) for lake and puddle mechanisms respectively) but that the trends for different quinones remain correlated to the redox potentials independently of the mechanism.

Mononuclear ruthenium (II) complex covalently anchored on melem and g-C3N4 as efficient heterogeneous catalysts for chemical water oxidation

Ru-melem and Ru-C₃N₄ were synthesized by a simple and facile strategy to construct a novel covalently anchoring by introducing easily synthesized amide bond as a bridge connecting the Ru-terpy and melem or g-C₃N₄, respectively. The covalent anchoring of Ru complex on melem or C₃N₄ not only makes these materials exhibit water oxidation activity under Ce^IV-driven (Ce^IV = Ce(NH₄)₂(NO₃)₆) reaction condition, but also makes the obtained heterogeneous catalysts show higher catalytic activity than the corresponding homogeneous catalysts, which reveals that the covalent anchoring strategy of Ru complex is beneficial to improve the catalytic activity of homogeneous Ru catalysts. The synthetic method of hybrid catalysts offers an insightful strategy for enhancing water oxidation activity of molecular catalysts.

Surface Engineering of TiO2 Nanosheets to Boost Photocatalytic Methanol Dehydrogenation for Hydrogen Evolution

Low-cost high-efficiency H₂ evolution is indispensable for its large-scale applications in the future. In the research, we expect to build high active photocatalysts for sunlight-driven H₂ production by surface engineering to adjust the work function of photocatalyst surfaces, adsorption/desorption ability of substrates and products, and reaction activation energy barrier. Single-atom Pt-doped TiO_2-x nanosheets (NSs), mainly including two facets of (001) and (101), with loading of Pt nanoparticles (NPs) at their edges (Pt/TiO_2-x-SAP) are successfully prepared by an oxygen vacancy-engaged synthetic strategy. According to the theoretical simulation, the implanted single-atom Pt can change the surface work function of TiO₂, which benefits electron transfer, and electrons tend to gather at Pt NPs adsorbed at (101) facet-related edges of TiO₂ NSs for H₂ evolution. Pt/TiO_2-x-SAP exhibits ultrahigh photocatalytic performance of hydrogen evolution from dry methanol with a quantum yield of 90.8% that is ∼1385 times higher than pure TiO_2-x NSs upon 365 nm light irradiation. The high H₂ generation rate (607 mmol g_cata^-1 h^-1) of Pt/TiO_2-x-SAP is the basis for its potential applications in the transportation field with irradiation of UV-visible light (100 mW cm^-2). Finally, lower adsorption energy for HCHO on Ti sites originated from TiO₂ (001) doping single-atom Pt is responsible for high selective dehydrogenation of methanol to HCHO, and H tends to favorably gather at Pt NPs on the TiO₂ (101) surface to produce H₂.

Surface Ru-H Bipyridine Complexes-Grafted TiO2 Nanohybrids for Efficient Photocatalytic CO2 Methanation

A series of novel surface Ru-H bipyridine complexes-grafted TiO₂ nanohybrids were for the first time prepared by a combined procedure of surface organometallic chemistry with post-synthetic ligand exchange for photocatalytic conversion of CO₂ to CH₄ with H₂ as electron and proton donors under visible light irradiation. The selectivity toward CH₄ increased to 93.4% by the ligand exchange of 4,4'-dimethyl-2,2'-bipyridine (4,4'-bpy) with the surface cyclopentadienyl (Cp)-RuH complex and the CO₂ methanation activity was enhanced by 4.4-fold. An impressive rate of 241.2 μL·g^-1·h^-1 for CH₄ production was achieved over the optimal photocatalyst. The femtosecond transient IR absorption results demonstrated that the hot electrons were fast injected in 0.9 ps from the photoexcited surface 4,4'-bpy-RuH complex into the conduction band of TiO₂ nanoparticles to form a charge-separated state with an average lifetime of ca. 50.0 ns responsible for the CO₂ methanation. The spectral characterizations indicated clearly that the formation of CO₂^•- radicals by single electron reduction of CO₂ molecules adsorbed on surface oxygen vacancies of TiO₂ nanoparticles was the most critical step for the methanation. Such radical intermediates were inserted into the explored Ru-H bond to generate Ru-OOCH species and finally CH₄ and H₂O in the presence of H₂.

Surface Modification of Hollow Structure TiO2 Nanospheres for Enhanced Photocatalytic Hydrogen Evolution

Engineering the surface structure of semiconductor is one of the most promising strategies for improving the separation and transfer efficiency of charge, which is a key issue in photocatalysis. Here, we designed and fabricated the C decorated hollow TiO₂ photocatalysts (C-TiO₂), in which 3-aminophenol-formaldehyde resin (APF) spheres were used as template and carbon precursor. It was determined that the C content can be easily controlled by calcinating the APF spheres with different time. Moreover, the synergetic effort between the optimal C content and the formed Ti-O-C bonds in C-TiO₂ were determined to increase the light absorption and greatly promote the separation and transfer of charge in the photocatalytic reaction, which is verified from UV-vis, PL, photocurrent, and EIS characterizations. Remarkably, the activity of the C-TiO₂ is 5.5-fold higher than that of TiO₂ in H₂ evolution. A feasible strategy for rational design and construction of surface-engineered hollow photocatalysts to improve the photocatalytic performance was provided in this study.

Supramolecular Coordination Cages for Artificial Photosynthesis and Synthetic Photocatalysis

Because sunlight is the most abundant energy source on earth, it has huge potential for practical applications ranging from sustainable energy supply to light driven chemistry. From a chemical perspective, excited states generated by light make thermodynamically uphill reactions possible, which forms the basis for energy storage into fuels. In addition, with light, open-shell species can be generated which open up new reaction pathways in organic synthesis. Crucial are photosensitizers, which absorb light and transfer energy to substrates by various mechanisms, processes that highly depend on the distance between the molecules involved. Supramolecular coordination cages are well studied and synthetically accessible reaction vessels with single cavities for guest binding, ensuring close proximity of different components. Due to high modularity of their size, shape, and the nature of metal centers and ligands, cages are ideal platforms to exploit preorganization in photocatalysis. Herein we focus on the application of supramolecular cages for photocatalysis in artificial photosynthesis and in organic photo(redox) catalysis. Finally, a brief overview of immobilization strategies for supramolecular cages provides tools for implementing cages into devices. This review provides inspiration for future design of photocatalytic supramolecular host-guest systems and their application in producing solar fuels and complex organic molecules.

Hybrid photocathode based on a Ni molecular catalyst and Sb2Se3 for solar H2 production

We report a H₂ evolving hybrid photocathode based on Sb₂Se₃ and a precious metal free molecular catalyst. Through the use of a high surface area TiO₂ scaffold, we successfully increased the Ni molecular catalyst loading from 7.08 ± 0.43 to 45.76 ± 0.81 nmol cm^-2, achieving photocurrents of 1.3 mA cm^-2 at 0 V vs. RHE, which is 81-fold higher than the device without the TiO₂ mesoporous layer.

Photoelectrochemical water oxidation by a MOF/semiconductor composite

Herein, we report the development of a MOF-semiconductor composite film active for water oxidation at a thermodynamic underpotential.

Water oxidation reaction in the presence of a dinuclear Mn(II)-semicarbohydrazone coordination compound

Water splitting, producing of oxygen, and hydrogen molecules, is an essential reaction for clean energy resources and is one of the challenging reactions for artificial photosynthesis. The Mn₄Ca cluster in photosystem II (PS-II) is responsible for water oxidation in natural photosynthesis. Due to this, water oxidation reaction by Mn coordination compounds is vital for mimicking the active core of the oxygen-evolving complex in PS-II. Here, a new dinuclear Mn(II)-semicarbohydrazone coordination compound, [Mn(HL)(µ-N₃)Cl]₂ (1), was synthesized and characterized by various methods. The structure of compound 1 was determined by single crystal X-ray analysis, which revealed the Mn(II) ions have distorted octahedral geometry as (MnN₄OCl). This geometry is created by coordinating of oxygen and two nitrogen donor atoms from semicarbohydrazone ligand, two nitrogen atoms from azide bridges, and chloride anion. Compound 1 was used as a catalyst for electrochemical water oxidation, and the surface of the electrode after the reaction was investigated by scanning electron microscopy, energy dispersive spectrometry, and powder X-ray diffraction analyses. Linear sweep voltammetry (LSV) experiments revealed that the electrode containing 1 shows high activity for chemical water oxidation with an electrochemical overpotential as low as 377 mV. Although our findings showed that the carbon paste electrode in the presence of 1 is an efficient electrode for water oxidation, it could not withstand water oxidation catalysis under bulk electrolysis and finally converted to Mn oxide nanoparticles which were active for water oxidation along with compound 1.

Accelerated Water Oxidation Kinetics Triggered by Supramolecular Porphyrin Nanosheet for Robust Visible-Light-Driven CO2 Reduction

Water oxidation is one of the most challenging steps in CO₂ photoreduction, but its influence on CO₂ photoreduction is still poorly understood. Herein, the concept of accelerating the water oxidation kinetics to promote the CO₂ photoreduction is realized by incorporating supramolecular porphyrin nanosheets (NS) into the C₃ N₄ catalyst. As a prototype, porphyrin-C₃ N₄ based van der Waals heterojunctions with efficient charge separation are elaborately designed, in which the porphyrin and C₃ N₄ NS serve as the water oxidation booster and CO₂ reduction center, respectively. Theoretical calculations and relevant experiments demonstrate that the added porphyrin NS reverses the rate-limiting step in the water oxidation while reducing its energy barrier, thus resulting in faster reaction kinetics. Therefore, the optimal sample shows excellent performance in visible-light-driven CO₂ reduction with a maximum CO evolution rate of 16.8 µmol g^-1 h^-1 , which is 6.8 times that of the C₃ N₄ NS and reaches the current state of the art for C₃ N₄ -based materials in CO₂ photoreduction. Overall, this work throws light that accelerating water oxidation kinetics can effectively improve the CO₂ photoreduction efficiency.

Recent Progress of Metal Sulfide Photocatalysts for Solar Energy Conversion

Artificial photosynthetic solar-to-chemical cycles enable an entire environment to operate in a more complex, yet effective, way to perform natural photosynthesis. However, such artificial systems suffer from a lack of well-established photocatalysts with the ability to harvest the solar spectrum and rich catalytic active-site density. Benefiting from extensive experimental and theoretical investigations, this bottleneck may be overcome by devising a photocatalytic platform based on metal sulfides with predominant electronic, physical, and chemical properties. These tunable properties can endow them with abundant active sites, favorable light utilization, and expedited charge transportation for solar-to-chemical conversion. Here, it is described how some vital lessons extracted from previous investigations are employed to promote the further development of metal sulfides for artificial photosynthesis, including water splitting, CO₂ reduction, N₂ reduction, and pollutant removal. Their functions, properties, synthetic strategies, emerging issues, design principles, and intrinsic functional mechanisms for photocatalytic redox reactions are discussed in detail. Finally, the associated challenges and prospects for the utilization of metal sulfides are highlighted and future development trends in photocatalysis are envisioned.

A Potential Roadmap to Integrated Metal Organic Framework Artificial Photosynthetic Arrays

Metal organic frameworks (MOFs), a class of coordination polymers, gained popularity in the late 1990s with the efforts of Omar Yaghi, Richard Robson, Susumu Kitagawa, and others. The intrinsic porosity of MOFs made them a clear platform for gas storage and separation. Indeed, these applications have dominated the vast literature in MOF synthesis, characterization, and applications. However, even in those early years, there were hints to more advanced applications in light-MOF interactions and catalysis. This perspective focuses on the combination of both light-MOF interactions and catalysis: MOF artificial photosynthetic assemblies. Light absorption, charge transport, H2O oxidation, and CO2 reduction have all been previously observed in MOFs; however, work toward a fully MOF-based approach to artificial photosynthesis remains out of reach. Discussed here are the current limitations with MOF-based approaches: diffusion through the framework, selectivity toward high value products, lack of integrated studies, and stability. These topics provide a roadmap for the future development of fully integrated MOF-based assemblies for artificial photosynthesis.

Ligands modification strategies for mononuclear water splitting catalysts

Artificial photosynthesis (AP) has been proved to be a promising way of alleviating global climate change and energy crisis. Among various materials for AP, molecular complexes play an important role due to their favorable efficiency, stability, and activity. As a result of its importance, the topic has been extensively reviewed, however, most of them paid attention to the designs and preparations of complexes and their water splitting mechanisms. In fact, ligands design and preparation also play an important role in metal complexes’ properties and catalysis performance. In this review, we focus on the ligands that are suitable for designing mononuclear catalysts for water splitting, providing a coherent discussion at the strategic level because of the availability of various activity studies for the selected complexes. Two main designing strategies for ligands in molecular catalysts, substituents modification and backbone construction, are discussed in detail in terms of their potentials for water splitting catalysts.

Energy-saving H2 production from a hybrid acid/alkali electrolyzer assisted by anodic glycerol oxidation

Water electrolysis is a promising technology for efficient hydrogen production, but it has been heavily hindered by the sluggish kinetics and high potential of the anodic oxygen evolution reaction (OER). Replacing the OER with the glycerol oxidation reaction (GOR) at the anode is recognized as a potential strategy to address this issue. In this work, the self-supported electrocatalytic electrode of Cu-Cu₂O nanoclusters on carbon cloth (Cu-Cu₂O/CC) is fabricated for the electrocatalysis of the GOR, which has high activity towards the GOR, reaching 10 mA cm^-2 at an applied voltage of 1.21 V, and shows high selectivity for formate production with a faradaic efficiency (FE) of over 80% in a wide potential range. Moreover, a hybrid acid/alkali electrolyzer is assembled by coupling the Cu-Cu₂O/CC anode for the GOR in an alkaline electrolyte with commercial Pt/C as the cathode for the hydrogen evolution reaction (HER) in an acid electrolyte. The dual-electrolyte electrolytic cell only requires an applied voltage of 0.59 V to reach 10 mA cm^-2 with a FE of ∼100% for H₂ and 97% for formate production. This work provides a facile strategy for the application of glycerol upgradation in energy-saving water electrolysis systems.

Boosting the Performance of BiVO4 Photoanodes by the Simultaneous Introduction of Oxygen Vacancies and Cocatalyst via Photoelectrodeposition

Photoelectrochemical (PEC) water splitting is a promising way to convert solar energy into hydrogen energy, but the efficiency is limited by severe charge recombination especially in photoanodes. Herein, to reduce the charge recombination in the bulk phase and at the surface of the BiVO₄ photoanodes, oxygen vacancy introduction and cocatalyst loading were realized simultaneously by one-step photocathode deposition. A unique re-BiVO₄/FeOOH photoanode was obtained by the photocathodic reduction of BiVO₄ in an electrolyte containing Fe³⁺, where the oxygen vacancies were introduced during the reduction process and the deposition of the FeOOH cocatalyst on the surface was induced by the generated OH^-. When used for PEC water oxidation, the obtained re-BiVO₄/FeOOH photoanode achieved an excellent PEC performance with a photocurrent density of 5.35 mA/cm² at 1.23 V versus RHE under AM 1.5G illumination, which was considerably higher than those for the pristine BiVO₄ photoanode (2.88 mA/cm²) and the re-BiVO₄ photoanode obtained by photocathodic reduction without Fe³⁺ (4.32 mA/cm²). After further modification with a cobalt silicate (Co-Sil) cocatalyst, the resultant re-BiVO₄/FeOOH/Co-Sil photoanode exhibited a photocurrent density as high as 6.10 mA/cm² at 1.23 V versus RHE and a remarkable applied bias photon-to-current efficiency of 2.25%. The outstanding performance of the re-BiVO₄/FeOOH/Co-Sil photoanode could be attributed to the coexistence of plenty of oxygen vacancies in BiVO₄ reducing recombination of photogenerated carriers, the FeOOH cocatalyst interlayer as a hole-transport layer, and the outer Co-Sil cocatalyst with a high activity toward oxygen evolution. This work may open a new avenue toward multifunctional modifications of photoanode systems for efficient solar conversion.

Linking oxidative and reductive clusters to prepare crystalline porous catalysts for photocatalytic CO2 reduction with H2O

Mimicking natural photosynthesis to convert CO₂ with H₂O into value-added fuels achieving overall reaction is a promising way to reduce the atmospheric CO₂ level. Casting the catalyst of two or more catalytic sites with rapid electron transfer and interaction may be an effective strategy for coupling photocatalytic CO₂ reduction and H₂O oxidation. Herein, based on the MOF ∪ COF collaboration, we have carefully designed and synthesized a crystalline hetero-metallic cluster catalyst denoted MCOF-Ti₆Cu₃ with spatial separation and functional cooperation between oxidative and reductive clusters. It utilizes dynamic covalent bonds between clusters to promote photo-induced charge separation and transfer efficiency, to drive both the photocatalytic oxidative and reductive reactions. MCOF-Ti₆Cu₃ exhibits fine activity in the conversion of CO₂ with water into HCOOH (169.8 μmol g⁻¹h⁻¹). Remarkably, experiments and theoretical calculations reveal that photo-excited electrons are transferred from Ti to Cu, indicating that the Cu cluster is the catalytic reduction center.

A crystalline hetero-metallic cluster catalyst based on a covalent organic framework strategy is reported. The catalyst can facilitate both photocatalytic oxidative and reductive reactions leading to efficient production of HCOOH from CO2 and H2O.

Computational Analysis of Structure - Activity Relationships in Highly Active Homogeneous Ruthenium-based Water Oxidation Catalysts

Linear free energy scaling relationships (LFESRs) and regression analysis may predict the catalytic performance of heterogeneous and recently, homogenous water oxidation catalysts (WOCs). This study analyses twelve homogeneous Ru-based catalysts - some, the most active catalysts studied: the Ru(tpy-R)(QC) and Ru(tpy-R)(4-pic)2 catalysts, where tpy is 2,2:6,2-terpyridine, QC is 8-quinolinecarboxylate and 4-pic is 4-picoline. Typical relationships studied among heterogenous and solid-state catalysts cannot be broadly applied to homogeneous catalysts. This subset of structurally similar catalysts with impressive catalytic activity deserves closer computational and statistical analysis of energetics correlating with measured catalytic activity. We report general methods of LFESR analysis yield insufficiently robust relationships between descriptor variables. However, volcano plot-based analysis grounded in Sabatier's principle reveals ranges of ideal relative energies of the RuIV=O and RuIV-OH intermediates and optimal changes in free energies of water nucleophilic attack on RuV=O. A narrow range of RuIV-OH to RuV=O redox potentials corresponding with the highest catalytic activities suggests facile access to the catalytically competent high-valent RuV=O state, often inaccessible from RuIV=O. Our work introduces experimental oxygen evolution rates into approaches of LFESR and Sabatier principle-based analysis, identifying a narrow yet fertile energetic landscape to bountiful oxygen-evolution activity, leading future rational design.