Electrodeposition Technologies for Li-Based Batteries: New Frontiers of Energy Storage

Electrochemical Synthesis of Copper Mesh-Supported Thermo-Catalysts

Metallic substrates, widely studied in the context of monolithic catalysts, offer inherent advantages in heterogeneous catalysis due to their exceptional thermal conductivity and mechanical properties. However, synthesizing stable monolithic catalysts with metallic substrates in a well-controlled manner remains a significant challenge. Here, this work introduces a simple, cost-efficient method to fabricate robust Cu mesh-supported thermo-catalysts using a modified cycling chronopotentiometry approach, where the Cu mesh serves as a donor of Cu ions. In this method, the Cu mesh surface generates two distinct layers of CuO and Cu2O. In this context, CuO acts as the active phase, accounting for the high CO oxidation activity of Cu mesh catalysts with T90 ≈ 120 °C. Additionally, these catalysts exhibit considerable potential in electrocatalysis, showcasing significant research and application value.

Zero Voltage-Degradation of Li2MnO3 with Ultrathin Amorphous Li─Mn─O Coating

Manganese-based lithium-rich layered oxides (Mn-LLOs) are promising candidate cathode materials for lithium-ion batteries, however, the severe voltage decay during cycling is the most concern for their practical applications. Herein, an Mn-based composite nanostructure constructed Li2MnO3 (LMO@Li2MnO3) is developed via an ultrathin amorphous functional oxide LixMnOy coating at the grain surface. Due to the thin and universal LMO amorphous surface layer etched from the lithiation process by the high-concentration alkaline solution, the structural and interfacial stability of Li2MnO3 are enhanced apparently, showing the significantly improved voltage maintenance, cycle stability, and energy density. In particular, the LMO@Li2MnO3 cathode exhibits zero voltage decay over 200 cycles. Combining with ex situ spectroscopic and microscopic techniques, the Mn2+/4+ coexisted behavior of the amorphous LMO is revealed, which enables the stable electrochemistry of Li2MnO3. This work provides new possible routes for suppressing the voltage decay of Mn-LLOs by modifying with the composite functional unit construction.

High-efficiency electrodeposition of magnesium alloy-based anodes for ultra-stable rechargeable magnesium-ion batteries

Rechargeable magnesium batteries (RMBs) have attracted much attention because of their high theoretical volumetric capacity and high safety. However, the uneven deposition behavior, harmful corrosion reaction and poor stability of magnesium metal anodes have hindered the practical application of RMBs. Herein, we propose a facile alloy electrodeposition method to construct an artificial layer on an Mg anode. Experimental results show that the polarization of the symmetric magnesium alloy-based (Mg-Sn@Mg and Mg-Bi@Mg) cells is significantly reduced (∼0.05 V) at a current density of 0.1 mA cm-2. The symmetric cells using the prepared Mg alloy anodes exhibited lower voltage hysteresis and ultra-stable cycling performance at a higher density of 1.0 mA cm-2 over 700 h. The in situ optical microscopy study clearly demonstrated that the Mg dendrite formation was successfully retarded by the designed Mg-Sn and Mg-Bi alloy artificial protective layer on Mg anodes. The superiority of Mg-Sn@Mg and Mg-Bi@Mg was further confirmed in full cells using Mo6S8 as the cathode. Compared with the Mo6S8//Mg full cell, the Mo6S8//Mg-Sn@Mg and Mo6S8//Mg-Bi@Mg full cells maintained an ultra-stable electrochemical performance even after 5000 cycles. This proof-of-concept provides a novel scope for the artificial coating layers on Mg anodes prepared by alloy electrodeposition and can be extended to other alloy anodes (i.e. Mg-Cu@Mg and so on). This work provides an avenue for the design of practical and high-performance RMBs and beyond.

Polymorphs of Nb2O5 Compound and Their Electrical Energy Storage Applications

Niobium pentoxide (Nb2O5), as an important dielectric and semiconductor material, has numerous crystal polymorphs, higher chemical stability than water and oxygen, and a higher melt point than most metal oxides. Nb2O5 materials have been extensively studied in electrochemistry, lithium batteries, catalysts, ionic liquid gating, and microelectronics. Nb2O5 polymorphs provide a model system for studying structure-property relationships. For example, the T-Nb2O5 polymorph has two-dimensional layers with very low steric hindrance, allowing for rapid Li-ion migration. With the ever-increasing energy crisis, the excellent electrical properties of Nb2O5 polymorphs have made them a research hotspot for potential applications in lithium-ion batteries (LIBs) and supercapacitors (SCs). The basic properties, crystal structures, synthesis methods, and applications of Nb2O5 polymorphs are reviewed in this article. Future research directions related to this material are also briefly discussed.

Synthesis of Deliquescent Lithium Sulfide in Air

In the field of lithium-sulfur batteries (LSBs) and all-solid-state batteries, lithium sulfide (Li2S) is a critical raw material. However, its practical application is greatly hindered by its high price due to its deliquescent property and production at high temperatures (above 700 °C) with carbon emission. Hereby, we report a new method of preparing Li2S, in air and at low temperatures (∼200 °C), which presents enriched and surprising chemistry. The synthesis relies on the solid-state reaction between inexpensive and air-stable raw materials of lithium hydroxide (LiOH) and sulfur (S), where lithium sulfite (Li2SO3), lithium thiosulfate (Li2S2O3), and water are three major byproducts. About 57% of lithium from LiOH is converted into Li2S, corresponding to a material cost of ∼$64.9/kg_Li2S, less than 10% of the commercial price. The success of conducting this water-producing reaction in air lies in three-fold: (1) Li2S is stable with oxygen below 220 °C; (2) the use of excess S can prevent Li2S from water attack, by forming lithium polysulfides (Li2Sn); and (3) the byproduct water can be expelled out of the reaction system by the carrier gas and also absorbed by LiOH to form LiOH·H2O. Two interesting and beneficial phenomena, i.e., the anti-hydrolysis of Li2Sn and the decomposition of Li2S2O3 to recover Li2S, are explained with density functional theory computations. Furthermore, our homemade Li2S (h-Li2S) is at least comparable with the commercial Li2S (c-Li2S), when being tested as cathode materials for LSBs.

Electrode Materials for Enhancing the Performance and Cycling Stability of Zinc Iodide Flow Batteries at High Current Densities

Aqueous redox flow battery systems that use a zinc negative electrode have a relatively high energy density. However, high current densities can lead to zinc dendrite growth and electrode polarization, which limit the battery's high power density and cyclability. In this study, a perforated copper foil with a high electrical conductivity was used on the negative side, combined with an electrocatalyst on the positive electrode in a zinc iodide flow battery. A significant improvement in the energy efficiency (ca. 10% vs using graphite felt on both sides) and cycling stability at a high current density of 40 mA cm^-2 was observed. A long cycling stability with a high areal capacity of 222 mA h cm^-2 is obtained in this study, which is the highest reported areal capacity for zinc-iodide aqueous flow batteries operating at high current density, in comparison to previous studies. Additionally, the use of a perforated copper foil anode in combination with a novel flow mode was discovered to achieve consistent cycling at exceedingly high current densities of >100 mA cm^-2. In situ and ex situ characterization techniques, including in situ atomic force microscopy coupled with in situ optical microscopy and X-ray diffraction, are applied to clarify the relationship between zinc deposition morphology on the perforated copper foil and battery performance in two different flow field conditions. With a portion of the flow going through the perforations, a significantly more uniform and compact zinc deposition was observed compared to the case where all of the flow passed over the surface of the electrode. Results from modeling and simulation support the conclusion that the flow of a fraction of electrolyte through the electrode enhances mass transport, enabling a more compact deposit.

CrP Nanocatalyst within Porous MOF Architecture to Accelerate Polysulfide Conversion in Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries demonstrate great potential for next-generation electrochemical energy storage systems because of their high specific energy and low-cost materials. However, the shuttling behavior and slow kinetics of intermediate polysulfide (PS) conversion pose a major obstacle to the practical application of Li-S batteries. Herein, CrP within a porous nanopolyhedron architecture derived from a metal-organic framework (CrP@MOF) is developed as a highly efficient nanocatalyst and S host to address these issues. Theoretical and experimental analyses demonstrate that CrP@MOF has a remarkable binding strength to trap soluble PS species. In addition, CrP@MOF shows abundant active sites to catalyze the PS conversion, accelerate Li-ion diffusion, and induce the precipitation/decomposition of Li₂S. As a result, the CrP@MOF-containing Li-S batteries demonstrate over 67% capacity retention over 1000 cycles at 1 C, ∼100% Coulombic efficiency, and high rate capability (674.6 mAh g^-1 at 4 C). In brief, CrP nanocatalysts accelerate the PS conversion and improve the overall performance of Li-S batteries.

Electrodeposition of Stable Noble-Metal-Free Co-P Electrocatalysts for Hydrogen Evolution Reaction

Hydrogen production via water splitting has been extensively explored over the past few decades, and considerable effort has been directed toward finding more reactive and cost-effective electrocatalysts by engineering their compositions, shapes, and crystal structures. In this study, we developed hierarchical cobalt phosphide (Co-P) nanosphere assemblies as non-noble metal electrocatalysts via one-step electrodeposition. The morphologies of the Co-P nanostructures and their electrocatalytic activities towards the hydrogen evolution reactions (HER) were controlled by the applied potentials during electrodeposition. The physicochemical properties of the as-prepared Co-P nanostructures in this study were characterized by field-emission scanning electron microscopy, X-ray photoemission spectroscopy and X-ray diffraction. Linear sweep voltammetry revealed that the Co-P grown at -0.9 V showed the best HER performance exhibiting the highest electrochemical active surface area and lowest interfacial charge transfer resistance. The Co-P electrocatalysts showed superior long-term stability to electrodeposited Pt, indicating their potential benefits.

Flexible Mn3O4/MXene Films with 2D-2D Architectures as Stable and Ultrafast Anodes for Li-Ion Batteries

Mn₃O₄ is regarded as a promising anode material for lithium-ion batteries (LIBs) based on its ultrahigh theoretical capacity (937 mAh g^-1) and low cost but suffers from poor electronic conductivity and large volume variation during the lithiation/delithiation process, which result in dramatic capacity fading and inferior rate capability. Ti₃C₂T_x MXene, a novel two-dimensional transition metal carbide with metallic conductivity, excellent mechanical properties, and hydrophilic surface, could be an ideal candidate to improve the lithium storage performance of Mn₃O₄. Here, a unique flexible, 2D-2D Mn₃O₄/MXene film is fabricated by assembling 2D Mn₃O₄ with Ti₃C₂T_x nanosheets through a simple vacuum filtration approach. In this unique 2D-2D nanostructure, MXene nanosheets buffer the volume change of Mn₃O₄ during the charge/discharge process. Moreover, the introduction of MXene enables the fabricated 2D-2D nanostructure with excellent flexibility and can be directly used as an electrode for LIBs, which is beneficial for enhancing the energy density of the assembled batteries. As a result, the flexible film of Mn₃O₄-MXene-8-2 shows excellent lithium storage performances in terms of specific capacity (931 mAh g^-1 at 0.05 A g^-1), rate capability (624 mAh g^-1 at 1 A g^-1), and cycling stability, demonstrating its great potential for the application in LIBs.

Advances in the Emerging Gradient Designs of Li Metal Hosts

Developing host has been recognized a potential countermeasure to circumvent the intrinsic drawbacks of Li metal anode (LMA), such as uncontrolled dendrite growth, unstable solid electrolyte interface, and infinite volume fluctuations. To realize proper Li accommodation, particularly bottom-up deposition of Li metal, gradient designs of host materials including lithiophilicity and/or conductivity have attracted a great deal of attention in recent years. However, a critical and specialized review on this quickly evolving topic is still absent. In this review, we attempt to comprehensively summarize and update the related advances in guiding Li nucleation and deposition. First, the fundamentals regarding Li deposition are discussed, with particular attention to the gradient design principles of host materials. Correspondingly, the progress of creating different gradients in terms of lithiophilicity, conductivity, and their hybrid is systematically reviewed. Finally, future challenges and perspective on the gradient design of advanced hosts towards practical LMAs are provided, which would provide a useful guidance for future studies.

Spongy all-in-liquid materials by in-situ formation of emulsions at oil-water interfaces

Printing a structured network of functionalized droplets in a liquid medium enables engineering collectives of living cells for functional purposes and promises enormous applications in processes ranging from energy storage to tissue engineering. Current approaches are limited to drop-by-drop printing or face limitations in reproducing the sophisticated internal features of a structured material and its interactions with the surrounding media. Here, we report a simple approach for creating stable liquid filaments of silica nanoparticle dispersions and use them as inks to print all-in-liquid materials that consist of a network of droplets. Silica nanoparticles stabilize liquid filaments at Weber numbers two orders of magnitude smaller than previously reported in liquid-liquid systems by rapidly producing a concentrated emulsion zone at the oil-water interface. We experimentally demonstrate the printed aqueous phase is emulsified in-situ; consequently, a 3D structure is achieved with flexible walls consisting of layered emulsions. The tube-like printed features have a spongy texture resembling miniaturized versions of “tube sponges” found in the oceans. A scaling analysis based on the interplay between hydrodynamics and emulsification kinetics reveals that filaments are formed when emulsions are generated and remain at the interface during the printing period. Stabilized filaments are utilized for printing liquid-based fluidic channels.

All-in-liquid printing promises applications from energy storage to drug delivery and tissue engineering. Here, authors present the in-situ generation of layered emulsion in a fraction of a second at the oil-water interface forming 3D tube-like structures in a liquid medium.

Engineering a High-Voltage Durable Cathode/Electrolyte Interface for All-Solid-State Lithium Metal Batteries via In Situ Electropolymerization

Poly(ethylene oxide) (PEO)-based polymer electrolytes have been widely studied as a result of their flexibility, excellent interface contact, and high compatibility with a lithium metal anode. Owing to the poor oxidation resistance of ethers, however, the PEO-based electrolytes are only compatible with low-voltage cathodes, which limits their energy density. Here, a high-voltage stable solid-state interface layer based on polyfluoroalkyl acrylate was constructed via in situ solvent-free bulk electropolymerization between the LiNi_0.8Mn_0.1Co_0.1O₂ (NCM811) cathode and the PEO-based solid polymer electrolyte. The electrochemical oxidation window of the as-synthesized electrolyte was therefore expanded from 4.3 V for the PEO-based matrix electrolyte to 5.1 V, and the ionic conductivity was improved to 1.02 × 10^-4 S cm^-1 at ambient temperature and 4.72 × 10^-4 S cm^-1 at 60 °C as a result of the improved Li⁺ migration. This fabrication process for the interface buffer layer by an in situ electrochemical process provides an innovative and universal interface engineering strategy for high-performance and high-energy-density solid-state batteries, which has not been explicitly discussed before, paving the way toward the large-scale production of the next generation of solid-state lithium batteries.

Organic/Inorganic Hybrid Fibers: Controllable Architectures for Electrochemical Energy Applications

Organic/inorganic hybrid fibers (OIHFs) are intriguing materials, possessing an intrinsic high specific surface area and flexibility coupled to unique anisotropic properties, diverse chemical compositions, and controllable hybrid architectures. During the last decade, advanced OIHFs with exceptional properties for electrochemical energy applications, including possessing interconnected networks, abundant active sites, and short ion diffusion length have emerged. Here, a comprehensive overview of the controllable architectures and electrochemical energy applications of OIHFs is presented. After a brief introduction, the controllable construction of OIHFs is described in detail through precise tailoring of the overall, interior, and interface structures. Additionally, several important electrochemical energy applications including rechargeable batteries (lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries), supercapacitors (sandwich-shaped supercapacitors and fiber-shaped supercapacitors), and electrocatalysts (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction) are presented. The current state of the field and challenges are discussed, and a vision of the future directions to exploit OIHFs for electrochemical energy devices is provided.

Progress in Iron Oxides Based Nanostructures for Applications in Energy Storage

The demand for green and efficient energy storage devices in daily life is constantly rising, which is caused by the global environment and energy problems. Lithium-ion batteries (LIBs), an important kind of energy storage devices, are attracting much attention. Graphite is used as LIBs anode, however, its theoretical capacity is low, so it is necessary to develop LIBs anode with higher capacity. Application strategies and research progresses of novel iron oxides and their composites as LIBs anode in recent years are summarized in this review. Herein we enumerate several typical synthesis methods to obtain a variety of iron oxides based nanostructures, such as gas phase deposition, co-precipitation, electrochemical method, etc. For characterization of the iron oxides based nanostructures, especially the in-situ X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy are elaborated. Furthermore, the electrochemical applications of iron oxides based nanostructures and their composites are discussed and summarized.

Graphic Abstract

Expounding the Initial Alloying Behavior of Na-K Liquid Alloy Electrodes

Primary electrodeposition is an accepted strategy to elucidate the nucleation and growth kinetics of metal electrodes. Nevertheless, when confronted with the phase transition process caused by bi-active metals such as NaK liquid alloys, the research process becomes complex and elusive. Herein, we have reduced the intricate issues to relatively simple initial alloying behaviors. Two exchange diffusion mechanisms of the Na atom embedded in K crystals and K atom embedded in Na crystals are investigated by first-principles density functional theory (DFT) calculation and mechanical simulation. As a result, the process of embedding the Na atom in K crystals shows a better thermodynamic stability and lower activation barrier and structural stress than those of the other. The abovementioned conclusions are further proved by stepwise Na and K electrodeposition experiments, and the prepared NaK alloy electrode displays excellent electrochemical performance. Our findings correlate the original alloying mechanism model specification with electrodeposition experimental verification and provide strategies to achieve controllable NaK electrode construction.

Direct Growth of Si, Ge, and Si-Ge Heterostructure Nanowires Using Electroplated Zn: An Inexpensive Seeding Technique for Li-Ion Alloying Anodes

A scalable and cost-effective process is used to electroplate metallic Zn seeds on stainless steel substrates. Si and Ge nanowires (NWs) are subsequently grown by placing the electroplated substrates in the solution phase of a refluxing organic solvent at temperatures >430 °C and injecting the respective liquid precursors. The native oxide layer formed on reactive metals such as Zn can obstruct NW growth and is removed in situ by injecting the reducing agent LiBH₄ . The findings show that the use of Zn as a catalyst produces defect-rich Si NWs that can be extended to the synthesis of Si-Ge axial heterostructure NWs with an atomically abrupt Si-Ge interface. As an anode material, the as grown Zn seeded Si NWs yield an initial discharge capacity of 1772 mAh g^-1 and a high capacity retention of 85% after 100 cycles with the active participation of both Si and Zn during cycling. Notably, the Zn seeds actively participate in the Li-cycling activities by incorporating into the Si NWs body via a Li-assisted welding process, resulting in restructuring the NWs into a highly porous network structure that maintains a stable cycling performance.

Interface Inversion: A Promising Strategy to Configure Ultrafine Nanoparticles over Graphene for Fast Sodium Storage

Due to the merits of high activity and rapid reaction kinetics, ultrafine nanoparticles loaded on conductive scaffolds are of great potential in energy-related fields. Usually, the nucleation and uniform growth of these active nanoparticles in high density on scaffolds is governed by the local ion concentration gradient and nucleation sites at the interfaces. On account of this, a novel interface-inverting strategy is developed to modulate the diffusion of metal ions toward the nucleation sites, leading to the tuned growth of ultrafine nanoparticles anchored on graphene. Typically, the Ni(OH)₂ deposited on graphene initially enables the interface inverting from oil-water-solid consisting of liquid paraffin (LP), water, and GO to water-oil-solid, finally resulting in LP-enveloped Ni(OH)₂ /GO structure. In response, the inert-infiltrated LP layer inhibits the solubility and diffusion of nickel ions, which functions to modulate the growth and aggregation of adjacent nanoparticles. As a demonstration, the phosphorized Ni₂ P@C/G as anode in sodium-ion capacitor can deliver a high energy density of 54 Wh kg^-1 at a high power density of 23 kW kg^-1 yet with a remarkable rate performance due to the surface-enhanced energy storage and fast Na⁺ transport enabled by the tuned surface/interface.

LiMnO2@rGO nanocomposites for high-performance lithium-ion battery cathodes

Composites of reduced graphene oxide (rGO) and layered LiMnO₂ (LiMnO₂@rGO) were successfully synthesized and demonstrated via a one-pot hydrothermal route at a temperature of 200 °C for 12 h. The obtained LiMnO₂@rGO was characterized by x-ray diffraction, transmission electron microscopy, Fourier transform infrared spectra and Raman spectra. Electrochemical performance tests of LiMnO₂@rGO and LiMnO₂ cathodes exhibited that after graphene oxide was loaded, the discharge capacity and cycling performance were greatly improved, the maximum discharge capacity reached 185.6 mAh g^-1 at the current density of 100 mA g^-1 with retention capacity higher than 80% even after 100 cycles between 2 and 4.5 V vs. Li⁺/Li, which is much better than most previous reports (table S1). The principles of the corresponding phenomenon were fully explained by the low electron conductivity, high structural stability and lithium diffusion coefficient of LiMnO₂@rGO, which was also proved by cyclic voltammetry testing, electrochemical impedance spectroscopy and relevant equivalent circuit fitting. This work not only provides significant insights into the relationship between the structure and electrochemical performance of electrodes, but also shows the great potential of LiMnO₂@rGO composite electrodes applied as the cathode materials of lithium-ion batteries.

Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review

Energy storage materials are finding increasing applications in our daily lives, for devices such as mobile phones and electric vehicles. Current commercial batteries use flammable liquid electrolytes, which are unsafe, toxic, and environmentally unfriendly with low chemical stability. Recently, solid electrolytes have been extensively studied as alternative electrolytes to address these shortcomings. Herein, we report the early history, synthesis and characterization, mechanical properties, and Li+ ion transport mechanisms of inorganic sulfide and oxide electrolytes. Furthermore, we highlight the importance of the fabrication technology and experimental conditions, such as the effects of pressure and operating parameters, on the electrochemical performance of all-solid-state Li batteries. In particular, we emphasize promising electrolyte systems based on sulfides and argyrodites, such as LiPS5Cl and β-Li3PS4, oxide electrolytes, bare and doped Li7La3Zr2O12 garnet, NASICON-type structures, and perovskite electrolyte materials. Moreover, we discuss the present and future challenges that all-solid-state batteries face for large-scale industrial applications.

A Review on Nano-/Microstructured Materials Constructed by Electrochemical Technologies for Supercapacitors

The article reviews the recent progress of electrochemical techniques on synthesizing nano-/microstructures as supercapacitor electrodes. With a history of more than a century, electrochemical techniques have evolved from metal plating since their inception to versatile synthesis tools for electrochemically active materials of diverse morphologies, compositions, and functions. The review begins with tutorials on the operating mechanisms of five commonly used electrochemical techniques, including cyclic voltammetry, potentiostatic deposition, galvanostatic deposition, pulse deposition, and electrophoretic deposition, followed by thorough surveys of the nano-/microstructured materials synthesized electrochemically. Specifically, representative synthesis mechanisms and the state-of-the-art electrochemical performances of exfoliated graphene, conducting polymers, metal oxides, metal sulfides, and their composites are surveyed. The article concludes with summaries of the unique merits, potential challenges, and associated opportunities of electrochemical synthesis techniques for electrode materials in supercapacitors.

Electrodeposition of (hydro)oxides for an oxygen evolution electrode

Electrochemical water splitting is a promising technology for hydrogen production and sustainable energy conversion, but the electrolyzers that are currently available do not have anodic electrodes that are robust enough and highly active for the oxygen evolution reaction (OER). Electrodeposition provides a feasible route for preparing freestanding OER electrodes with high active site utilization, fast mass transport and a simple fabrication process, which is highly attractive from both academic and commercial points of view. This minireview focuses on the recent electrodeposition strategies for metal (hydro)oxide design and water oxidation applications. First, the intrinsic advantages of electrodeposition in comparison with traditional technologies are introduced. Then, the unique properties and underlying principles of electrodeposited metal (hydro)oxides in the OER are unveiled. In parallel, illustrative examples of the latest advances in materials structural design, controllable synthesis, and mechanism understanding through the electrochemical synthesis of (hydro)oxides are presented. Finally, the latest representative OER mechanism and electrodeposition routes for OER catalysts are briefly overviewed. Such observations provide new insights into freestanding (hydro)oxides electrodes prepared via electrodeposition, which show significant practical application potential in water splitting devices. We hope that this review will provide inspiration for researchers and stimulate the development of water splitting technology.

Controllable and Versatile Electrophoretic Deposition Technology for Monolithic Organic Memory Devices

Scaling up organic nanofilm deposition from the laboratory scale to the industrial scale is an important challenge for the booming organic electronics. Herein, we propose a high-efficiency technology for organic nanofilm deposition called electrophoretic deposition (EPD). EPD was used to produce scalable films based on an ingenious molecular design by introducing the pyridinium group and flexible substituents to versatile solution-processable organic salts. EPD films with an area of 10⁴ mm² and controllable film thickness ranging from 50 nm to 1.55 μm can be easily fabricated using an organic solvent under different deposition conditions. Compared with traditional spin-coated films, the superior electrochemical and mechanical properties of EPD films are ascribed to their compact molecular packing, high purity, and uniform morphology. Evaluation of 2745 device units integrated into a 10⁴ mm² monolithic organic memory device showed that 95% of the device units possessed excellent binary data-storage performance with high stability and reproducibility, small reading bias (1.0 V), and large ON/OFF ratio (>10³). Furthermore, decoating tests of EPD-based films and devices by the process of reverse EPD with switched electrode polarity suggested the potential application for information storage security and active environmental protection by simultaneously separating and recycling metal electrodes and organic materials.

A stabilized PEO-based solid electrolyte via a facile interfacial engineering method for a high voltage solid-state lithium metal battery

A facile interfacial engineering method was developed to achieve stable cycling of a Li/PEO–LiTFSI/LiNi_0.5Co_0.2Mn_0.3O₂ solid-state battery at 4.2 V.