Boosting Catalysis of Pd Nanoparticles in MOFs by Pore Wall Engineering: The Roles of Electron Transfer and Adsorption Energy

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Recent Advances in Pristine Iron Triad Metal-Organic Framework Cathodes for Alkali Metal-Ion Batteries

Pristine iron triad metal-organic frameworks (MOFs), i.e., Fe-MOFs, Co-MOFs, Ni-MOFs, and heterometallic iron triad MOFs, are utilized as versatile and promising cathodes for alkali metal-ion batteries, owing to their distinctive structure characteristics, including modifiable and designable composition, multi-electron redox-active sites, exceptional porosity, and stable construction facilitating rapid ion diffusion. Notably, pristine iron triad MOFs cathodes have recently achieved significant milestones in electrochemical energy storage due to their exceptional electrochemical properties. Here, the recent advances in pristine iron triad MOFs cathodes for alkali metal-ion batteries are summarized. The redox reaction mechanisms and essential strategies to boost the electrochemical behaviors in associated electrochemical energy storage devices are also explored. Furthermore, insights into the future prospects related to pristine iron triad MOFs cathodes for lithium-ion, sodium-ion, and potassium-ion batteries are also delivered.

Interfacial Engineering of Heterogeneous Reactions for MOF-on-MOF Heterostructures

Metal-organic frameworks (MOFs), as a subclass of porous crystalline materials with unique structures and multifunctional properties, play a pivotal role in various research domains. In recent years, significant attention has been directed toward composite materials based on MOFs, particularly MOF-on-MOF heterostructures. Compared to individual MOF materials, MOF-on-MOF structures harness the distinctive attributes of two or more different MOFs, enabling synergistic effects and allowing for the tailored design of diverse multilayered architectures to expand their application scope. However, the rational design and facile synthesis of MOF-on-MOF composite materials are in principle challenging due to the structural diversity and the intricate interfaces. Hence, this review primarily focuses on elucidating the factors that influence their interfacial growth, with a specific emphasis on the interfacial engineering of heterogeneous reactions, in which MOF-on-MOF hybrids can be conveniently obtained by using pre-fabricated MOF precursors. These factors are categorized as internal and external elements, encompassing inorganic metals, organic ligands, lattice matching, nucleation kinetics, thermodynamics, etc. Meanwhile, these intriguing MOF-on-MOF materials offer a wide range of advantages in various application fields, such as adsorption, separation, catalysis, and energy-related applications. Finally, this review highlights current complexities and challenges while providing a forward-looking perspective on future research directions.

Molecular Engineering and Morphology Control of Covalent Organic Frameworks for Enhancing Activity of Metal-Enzyme Cascade Catalysis

Metal-enzyme integrated catalysts (MEICs) that combine metal and enzyme offer great potential for sustainable chemoenzymatic cascade catalysis. However, rational design and construction of optimal microenvironments and accessible active sites for metal and enzyme in individual nanostructures are necessary but still challenging. Herein, Pd nanoparticles (NPs) and Candida antarctica lipase B (CALB) are co-immobilized into the pores and surfaces of covalent organic frameworks (COFs) with tunable functional groups, affording Pd/COF-X/CALB (X = ONa, OH, OMe) MEICs. This strategy can regulate the microenvironment around Pd NPs and CALB, and their interactions with substrates. As a result, the activity of the COF-based MEICs in catalyzing dynamic kinetic resolution of primary amines is enhanced and followed COF-OMe > COF-OH > COF-ONa. The experimental and simulation results demonstrated that functional groups of COFs modulated the conformation of CALB, the electronic states of Pd NPs, and the affinity of the integrated catalysts to the substrate, which contributed to the improvement of the catalytic activity of MEICs. Further, the MEICs are prepared using COF with hollow structure as support material, which increased accessible active sites and mass transfer efficiency, thus improving catalytic performance. This work provides a blueprint for rational design and preparation of highly active MEICs.

Designed Synthesis of Fe/Zr Bimetallic Organic Framework to Enhance the Selective Conversion of H2S to Sulfur

The development of stable and effective catalysts to convert toxic H2S into high value-added sulfur is essential for production safety and environmental protection. However, the inherent defects of traditional iron- and zirconium-based catalysts, such as poor activity, high oxygen consumption, and low sulfur selectivity, limit their further developments and applications. Herein, the Fe-Zr bimetallic organic framework FeUIO-66(x) with different cubic morphologies was synthesized via a facile solvothermal method. The results indicate that the introduction of Fe not only increases the specific surface area and weak L-sites of the catalyst without changing its crystal structure, which provides enough reaction space and more active sites for the adsorption and activation of H2S, but also reduces the activation energy of the reaction, significantly promoting the selective oxidation of H2S. As a result, the as-obtained FeUIO-66(1) catalyst exhibits the highest desulfurization activity and superior durability and water resistance stability, and its H2S conversion and sulfur selectivity within 50 h are 100 and 88%, respectively. More importantly, the structure of the catalyst after the desulfurization reaction is consistent with that of the fresh counterpart. The study offers new insights into the development of effective and stable bimetallic catalysts to eliminate H2S and recycle sulfur.

Nanocatalysts for modulating antitumor immunity: fabrication, mechanisms and applications

Immunotherapy harnesses the inherent immune system in the body to generate systemic antitumor immunity, offering a promising modality for defending against cancer. However, tumor immunosuppression and evasion seriously restrict the immune response rates in clinical settings. Catalytic nanomedicines can transform tumoral substances/metabolites into therapeutic products in situ, offering unique advantages in antitumor immunotherapy. Through catalytic reactions, both tumor eradication and immune regulation can be simultaneously achieved, favoring the development of systemic antitumor immunity. In recent years, with advancements in catalytic chemistry and nanotechnology, catalytic nanomedicines based on nanozymes, photocatalysts, sonocatalysts, Fenton catalysts, electrocatalysts, piezocatalysts, thermocatalysts and radiocatalysts have been rapidly developed with vast applications in cancer immunotherapy. This review provides an introduction to the fabrication of catalytic nanomedicines with an emphasis on their structures and engineering strategies. Furthermore, the catalytic substrates and state-of-the-art applications of nanocatalysts in cancer immunotherapy have also been outlined and discussed. The relationships between nanostructures and immune regulating performance of catalytic nanomedicines are highlighted to provide a deep understanding of their working mechanisms in the tumor microenvironment. Finally, the challenges and development trends are revealed, aiming to provide new insights for the future development of nanocatalysts in catalytic immunotherapy.

Enhancing Electroreduction CO2 to Hydrocarbons via Tandem Electrocatalysis by Incorporation Cu NPs in Boron Imidazolate Frameworks

Due to the higher value of deeply-reduced products, electrocatalytic CO2 reduction reaction (CO2 RR) to multi-electron-transfer products has received more attention. One attractive strategy is to decouple individual steps within the complicated pathway via multi-component catalysts design in the concept of tandem catalysts. Here, a composite of Cu@BIF-144(Zn) (BIF = boron imidazolate framework) is synthesized by using an anion framework BIF-144(Zn) as host to impregnate Cu2+ ions that are further reduced to Cu nanoparticles (NPs) via in situ electrochemical transformation. Due to the microenvironment modulation by functional BH(im)3 - on the pore surfaces, the Cu@BIF-144(Zn) catalyst exhibits a perfect synergetic effect between the BIF-144(Zn) host and the Cu NP guest during CO2 RR. Electrochemistry results show that Cu@BIF-144(Zn) catalysts can effectively enhance the selectivity and activity for the CO2 reduction to multi-electron-transfer products, with the maximum FECH4 value of 41.8% at -1.6 V and FEC2H4 value of 12.9% at -1.5 V versus RHE. The Cu@BIF-144(Zn) tandem catalyst with CO-rich microenvironment generated by the Zn catalytic center in the BIF-144(Zn) skeleton enhanced deep reduction on the incorporated Cu NPs for the CO2 RR to multi-electron-transfer products.

A Recent Advancement in Food Quality Assessment: Using MOF-Based Sensors: Challenges and Future Aspects

Monitoring food safety is crucial and significantly impacts the ecosystem and human health. To adequately address food safety problems, a collaborative effort needed from government, industry, and consumers. Modern sensing technologies with outstanding performance are needed to meet the growing demands for quick and accurate food safety monitoring. Recently, emerging sensors for regulating food safety have been extensively explored. Along with the development in sensing technology, the metal-organic frameworks (MOF)-based sensors gained more attention due to their excellent sensing, catalytic, and adsorption properties. This review summarizes the current advancements and applications of MOFs-based sensors, including colorimetric, electrochemical, luminescent, surface-enhanced Raman scattering, and electrochemiluminescent sensors. and also focused on the applications of MOF-based sensors for the monitoring of toxins such as heavy metals, pesticide residues, mycotoxins, pathogens, and illegal food additives from food samples. Future trends, as well as current developments in MOF-based materials.

Versatile Structural Engineering of Metal-Organic Frameworks Enabling Switchable Catalytic Selectivity

The structure engineering of metal-organic frameworks (MOFs) forms the cornerstone of their applications. Nonetheless, realizing the simultaneous versatile structure engineering of MOFs remains a significant challenge. Herein, a dynamically mediated synthesis strategy to simultaneously engineer the crystal structure, defect structure, and nanostructure of MOFs is proposed. These include amorphous Zr-ODB nanoparticles, crystalline Zr-ODB-hz (ODB = 4,4'-oxalyldibenzoate, hz = hydrazine) nanosheets, and defective d-Zr-ODB-hz nanosheets. Aberration-corrected scanning transmission electron microscopy combined with low-dose high-angle annular dark-field imaging technique vividly portrays these engineered structures. Concurrently, the introduced hydrazine moieties confer self-reduction properties to the respective MOF structures, allowing the in situ installation of catalytic Pd nanoparticles. Remarkably, in the hydrogenation of vanillin-like biomass derivatives, Pd/Zr-ODB-hz yields partially hydrogenated alcohols as the primary products, whereas Pd/d-Zr-ODB-hz exclusively produces fully hydrogenated alkanes. Density functional theory calculations, coupled with experimental evidence, uncover the catalytic selectivity switch triggered by the change in structure type. The proposed strategy of versatile structure engineering of MOFs introduces an innovative pathway for the development of high-performance MOF-based catalysts for various reactions.

Selectivity Control in the Direct CO Esterification over Pd@UiO-66: The Pd Location Matters

The selectivity control of Pd nanoparticles (NPs) in the direct CO esterification with methyl nitrite toward dimethyl oxalate (DMO) or dimethyl carbonate (DMC) remains a grand challenge. Herein, Pd NPs are incorporated into isoreticular metal-organic frameworks (MOFs), namely UiO-66-X (X=-H, -NO2 , -NH2 ), affording Pd@UiO-66-X, which unexpectedly exhibit high selectivity (up to 99 %) to DMC and regulated activity in the direct CO esterification. In sharp contrast, the Pd NPs supported on the MOF, yielding Pd/UiO-66, displays high selectivity (89 %) to DMO as always reported with Pd NPs. Both experimental and DFT calculation results prove that the Pd location relative to UiO-66 gives rise to discriminated microenvironment of different amounts of interface between Zr-oxo clusters and Pd NPs in Pd@UiO-66 and Pd/UiO-66, resulting in their distinctly different selectivity. This is an unprecedented finding on the production of DMC by Pd NPs, which was previously achieved by Pd(II) only, in the direct CO esterification.

A highly efficient synthetic strategy for de novo NP encapsulation into metal-organic frameworks: enabling further modulated control of catalytic properties

De novo encapsulation is a prevalent method to prepare composite materials where the structure-tunable metal nanoparticles (NPs) are holistically coated with metal-organic frameworks (MOFs). This method has been demonstrated to have promise in various fields but the extensive application of this approach is still challenging. This study proposed, for the first time, leveraging a specific surface-energy-dominated (SED) mechanism to achieve a highly efficient synthetic strategy for de novo NP encapsulation. The generality of this strategy is proved in applying to various MOFs, reaction conditions and the use of capping agents. By applying the strategy, Pd NPs with different morphologies are encapsulated in UiO-67, which is prone to self-assembly without coating, and an interesting enhancement is investigated in the selective semihydrogenation of alkynes on different Pd surfaces. These results demonstrate that the control of surface energy is a feasible method for efficient NP encapsulation which sheds light on the rational design of MOF-based composites for future applications.

Boosting the catalysis of cesium phosphomolybdate encapsulated in hierarchical porous UiO-66 by microenvironment modulation for epoxidation of alkenes

The chemical microenvironment of polyoxometalates (POMs) encapsulated in metal-organic frameworks (MOFs) presents a significant influence on their catalytic performance, which can be easily regulated by the linker functional group alteration or metal substitution in MOFs. Herein, a series of cesium phosphomolybdate (CsPM) encapsulated in hierarchical porous UiO-66-X composites (CsPM@HP-UiO-66-X, X = H, 2CH3, or 2OH, where X represents the alterable group grafted onto the linker benzene ring) were successfully synthesized through a one pot modulated solvothermal method. The catalytic performances of the obtained materials were explored in alkene epoxidation reaction with tert-butyl hydroperoxide (t-BuOOH). CsPM@HP-UiO-66-2CH3 showed relatively high catalytic activity, stability, and epoxidation selectivity in cyclooctene epoxidation among the CsPM@HP-UiO-66-X composites. Moreover, CsPM@HP-UiO-66-2CH3 was effective in the epoxidation of numerous alkenes, especially cyclic alkenes. The superior catalytic activity of CsPM@HP-UiO-66-2CH3 is mainly attributed to the modulation of the microenvironment surrounding CsPM active sites by introducing a hydrophobic methyl group. Meanwhile, the size-matched effect, the introduction of cesium cations, and the strong metal-support interactions (SMSIs) between CsPM and HP-UiO-66-2CH3 play a crucial role in the stability of CsPM@HP-UiO-66-2CH3.

Linker Engineering of Sandwich-Structured Metal-Organic Framework Composites for Optimized Photocatalytic H2 Production

While the microenvironment around catalytic sites is recognized to be crucial in thermocatalysis, its roles in photocatalysis remain subtle. In this work, a series of sandwich-structured metal-organic framework (MOF) composites, UiO-66-NH2 @Pt@UiO-66-X (X means functional groups), is rationally constructed for visible-light photocatalytic H2 production. By varying the ─X groups of the UiO-66-X shell, the microenvironment of the Pt sites and photosensitive UiO-66-NH2 core can be simultaneously modulated. Significantly, the MOF composites with identical light absorption and Pt loading present distinctly different photocatalytic H2 production rates, following the ─X group sequence of ─H > ─Br > ─NA (naphthalene) > ─OCH3  > ─Cl > ─NO2 . UiO-66-NH2 @Pt@UiO-66-H demonstrates H2 production rate up to 2708.2 µmol g-1  h-1 , ≈222 times that of UiO-66-NH2 @Pt@UiO-66-NO2 . Mechanism investigations suggest that the variation of the ─X group can balance the charge separation of the UiO-66-NH2 core and the proton reduction ability of Pt, leading to an optimal activity of UiO-66-NH2 @Pt@UiO-66-H at the equilibrium point.

Integration of Metal-Organic Frameworks and Metals: Synergy for Electrocatalysis

Electrocatalysis is a highly promising technology widely used in clean energy conversion. There is a continuing need to develop advanced electrocatalysts to catalyze the critical electrochemical reactions. Integrating metal active species, including various metal nanostructures (NSs) and atomically dispersed metal sites (ADMSs), into metal-organic frameworks (MOFs) leads to the formation of promising heterogeneous electrocatalysts that take advantage of both components. Among them, MOFs can provide support and protection for the active sites on guest metals, and the resulting host-guest interactions can synergistically enhance the electrocatalytic performance. In this review, three key concerns on MOF-metal heterogeneous electrocatalysts regarding the catalytic sites, conductivity, and catalytic stability are first presented. Then, rational integration strategies of MOFs and metals, including the integration of metal NSs via surface anchoring, space confining, and MOF coating, as well as the integration of ADMSs either with the metal nodes/linkers or within the pores of MOFs, along with their recent progress on synergistic cooperation for specific electrochemical reactions are summarized. Finally, current challenges and possible solutions in applying these increasingly concerned electrocatalysts are also provided.

Hollow Crystallization COF Capsuled MOF Hybrids Depict Serum Metabolic Profiling for Precise Early Diagnosis and Risk Stratification of Acute Coronary Syndrome

Acute coronary syndrome (ACS), comprising unstable angina (UA) and acute myocardial infarction (AMI), is the leading cause of death worldwide. Currently, lacking effective strategies for classifying ACS hinders the prognosis improvement of ACS patients. Disclosing the nature of metabolic disorders holds the potential to reflect disease progress and high-throughput mass spectrometry-based metabolic analysis is a promising tool for large-scale screening. Herein, a hollow crystallization COF capsuled MOF hybrids (UiO-66@HCOF) assisted serum metabolic analysis is developed for the early diagnosis and risk stratification of ACS. UiO-66@HCOF exhibits unrivaled chemical and structural stability as well as endowing satisfying desorption/ionization efficiency in the detection of metabolites. Paired with machine learning algorithms, early diagnosis of ACS is achieved with the area under the curve (AUC) value of 0.945 for validation sets. Besides, a comprehensive ACS risk stratification method is established, and the AUC value for the discrimination of ACS from healthy controls, and AMI from UA are 0.890, and 0.928. Moreover, the AUC value of the subtyping of AMI is 0.964. Finally, the potential biomarkers exhibit high sensitivity and specificity. This study makes metabolic molecular diagnosis a reality and provided new insight into the progress of ACS.

Microchemical environmental regulation of POMs@MIL-101(Cr) promote photocatalytic nitrogen to ammonia

The polyoxometalates (POMs) have been shown to be highly effective as reactive sites for photocatalytic nitrogen fixation reactions. However, the effect of POMs regulation on catalytic performance has not been reported yet. Herein, a series of composites (SiW₉M₃@MIL-101(Cr) (M = Fe, Co, V, Mo) and D-SiW₉Mo₃@MIL-101(Cr), D, Disordered) were obtained by regulating transition metal compositions and arrangement in the POMs. The ammonia production rate of SiW₉Mo₃@MIL-101(Cr) is much higher than that of other composites, reaching 185.67 μmol·h^-1·g^-1_cat in N₂ without sacrificial agents. The structural characterization of composites reveals that the increase of the electron cloud density of W atom in composites is the key to improve the photocatalytic performance. In this paper, the microchemical environment of POMs was regulated by transition metal doping method, thereby promoting the efficiency of photocatalytic ammonia synthesis for the composites, which provides new insights into the design of POM-based photocatalysts with high catalytic activity.

Boosting Activity and Selectivity of UiO-66 through Acidity/Alkalinity Functionalization in Dimethyl Carbonate Catalysis

The acid-base properties of supports have an enormous impact on catalytic reactions to regulate the selectivity and activity of supported catalysts. Herein, a train of Pd-X-UiO-66 (X = NO₂ , NH₂ , and CH₃ ) catalysts with different acidity/alkalinity functional groups and encapsulated Pd(II) species is first developed, whose activities in dimethyl carbonate (DMC) catalysis are then investigated in details. Thereinto, the Pd-NO₂ -UiO-66 catalyst with acidity functionalization exhibits the best catalytic behavior: the DMC selectivity stemmed from methyl nitrite (MN) is up to 68%, the conversion of CO is 73.4%. The obtained experimental results demonstrate that the NO₂ group not only affected the interaction between X-UiO-66 and Pd(II) active sites but also play an indispensable role in the adsorption and activation of MN and CO, which remarkably promote the formation of the COOCH₃ ^* intermediate and DMC product.

Electronic State and Microenvironment Modulation of Metal Nanoparticles Stabilized by MOFs for Boosting Electrocatalytic Nitrogen Reduction

Modulation of the local electronic structure and microenvironment of catalytic metal sites plays a critical role in electrocatalysis, yet remains a grand challenge. Herein, PdCu nanoparticles with an electron rich state are encapsulated into a sulfonate functionalized metal-organic framework, UiO-66-SO₃ H (simply as UiO-S), and their microenvironment is further modulated by coating a hydrophobic polydimethylsiloxane (PDMS) layer, affording PdCu@UiO-S@PDMS. This resultant catalyst presents high activity toward the electrochemical nitrogen reduction reaction (NRR, Faraday efficiency: 13.16%, yield: 20.24 µg h^-1 mg_cat. ^-1 ), far superior to the corresponding counterparts. Experimental and theoretical results jointly demonstrate that the protonated and hydrophobic microenvironment supplies protons for the NRR yet suppresses the competitive hydrogen evolution reaction reaction, and electron-rich PdCu sites in PdCu@UiO-S@PDMS are favorable to formation of the N₂ H* intermediate and reduce the energy barrier of NRR, thereby accounting for its good performance.

CuCo Nanoparticle, Pd(II), and l-Proline Trifunctionalized UiO-67 Catalyst for Three-Step Sequential Asymmetric Reactions

Metal-organic frameworks (MOFs) have become a promising support for different active sites to construct multifunctional and heterogeneous catalysts. However, the related investigation mainly focuses on introducing one or two active sites into MOFs and trifunctional catalysts have been very rarely reported. Herein, non-noble CuCo alloy nanoparticles, Pd²⁺, and l-proline, as encapsulated active species, functional organic linkers, and active metal nodes, respectively, were successfully decorated to UiO-67 to construct a chiral trifunctional catalyst by the one-step method, which was further applied to asymmetric three-step sequential oxidation of aromatic alcohols/Suzuki coupling/asymmetric aldol reactions with excellent oxidation and coupling performance (yields up to 95 and 96%, respectively), as well as good enantioselectivities (ee_anti value up to 73%) in asymmetric aldol reactions. The heterogeneous catalyst can be reused at least five times without obvious deactivation due to the strong interaction between the MOFs and the active sites. This work provides an effective strategy to construct multifunctional catalysts via the introduction and combination of three or more of active sites, including encapsulated active species, functional organic linkers, and active metal nodes, into stable MOFs.

Interaction between Single Metal Atoms and UiO-66 Framework Revealed by Low-Dose Imaging

Atomically dispersed metals encapsulated in metal-organic frameworks (MOFs) have attracted extensive attention in catalysis and energy fields. Amino groups were considered conducive to the formation of single atom catalysts (SACs) due to the strong metal-linker interactions. Here, atomic details of Pt₁@UiO-66 and Pd₁@UiO-66-NH₂ are revealed using low-dose integrated differential phase contrast scanning transmission electron microscopy (iDPC-STEM). Single Pt atoms locate on the benzene ring of p-benzenedicarboxylic acid (BDC) linkers in Pt@UiO-66, while single Pd atoms are adsorbed by the amino groups in Pd@UiO-66-NH₂. However, Pt@UiO-66-NH₂ and Pd@UiO-66 show obvious clusters. Therefore, amino groups do not always favor the formation of SACs, and density functional theory (DFT) calculations indicate that a moderate binding strength between metals and MOFs is preferred. These results directly reveal the adsorption sites of single metal atoms in UiO-66 family, paving the way for understanding the interaction between single metal atoms and the MOFs.

Direct generation of polypyrrole-coated palladium nanoparticles inside a metal-organic framework for a semihydrogenation catalyst

Herein, the direct synthesis of polypyrrole (PPy)-coated palladium nanoparticles (PdNPs) inside a metal-organic framework (MIL-101) was successfully demonstrated. Owing to the PPy coating of PdNPs, the resulting composites exhibited higher semihydrogenation capability (selectivity: up to 96%) than the analog composite without PPy coating.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

Enhanced Alkene Selectivity for Transfer Semihydrogenation of Alkynes over Electron-Deficient Pt Nanoparticles Encapsulated in Hollow Silica Nanospheres

In this work, we report that Pt nanoparticles confined in hollow porous silica nanospheres (Pt@HPSNs) function as highly selective catalysts for the transfer hydrogenation of phenylacetylene to styrene with ammonia borane. Relative to the deep hydrogenation of phenylacetylene to ethylbenzene over the supported Pt/SiO2, Pt@HPSNs exhibit above 88% of styrene selectivity at nearly 100% of phenylacetylene conversions, and the high selectivity of Pt@HPSNs can be maintained even at high ammonia borane/phenylacetylene ratios and longer reaction time. The Pt 4f X-ray photoelectron spectrum of Pt@HPSNs shows a remarkable ∼1.5 eV shift to high binding energy, proving the nature of electron deficiency of such encapsulated Pt nanoparticles. Combined with extremely minor transfer hydrogenation of styrene to ethylbenzene when styrene as substrates, the enhanced styrene selectivity of Pt@HPSNs is ascribed to the electron deficiency of encapsulated Pt nanoparticles, which leads to the fast desorption of styrene and thus avoids deep hydrogenation.

Vacancy-cluster-mediated surface activation for boosting CO2 chemical fixation

The cycloaddition of CO₂ with epoxides towards cyclic carbonates provides a promising pathway for CO₂ utilization. Given the crucial role of epoxide ring opening in determining the reaction rate, designing catalysts with rich active sites for boosting epoxide adsorption and C-O bond cleavage is necessary for gaining efficient cyclic carbonate generation. Herein, by taking two-dimensional FeOCl as a model, we propose the construction of electron-donor and -acceptor units within a confined region via vacancy-cluster engineering to boost epoxide ring opening. By combing theoretical simulations and in situ diffuse reflectance infrared Fourier-transform spectroscopy, we show that the introduction of Fe-Cl vacancy clusters can activate the inert halogen-terminated surface and provide reactive sites containing electron-donor and -acceptor units, leading to strengthened epoxide adsorption and promoted C-O bond cleavage. Benefiting from these, FeOCl nanosheets with Fe-Cl vacancy clusters exhibit enhanced cyclic carbonate generation from CO₂ cycloaddition with epoxides.

Non-covalent interactions (NCIs) in π-conjugated functional materials: advances and perspectives

The design and development of functional materials with real-life applications are highly demanding. Understanding and controlling inter- and intra-molecular interactions provide opportunities to design new materials. A judicious manipulation of the molecular structure significantly alters such interactions and can boost selected properties and functions of the material. There is burgeoning evidence of the beneficial effects of non-covalent interactions (NCIs), showing that manipulating NCIs may generate functional materials with a wide variety of physical properties leading to applications in catalysis, drug delivery, crystal engineering, etc. This prompted us to review the implications of NCIs on the molecular packing, optical properties, and applications of functional π-conjugated materials. To this end, this tutorial review will cover different types of interactions (electrostatic, π-interactions, metallophilic, etc.) and their impact on π-conjugated materials. Attempts have also been made to delineate the effects of weak interactions on opto-electronic (O-E) applications.

Defined metal atom aggregates precisely incorporated into metal-organic frameworks

Nanosized metal aggregates (MAs), including metal nanoparticles (NPs) and nanoclusters (NCs), are often the active species in numerous applications. In order to maintain the active form of MAs in "use", they need to be anchored and stabilised, preventing agglomeration. In this context, metal-organic frameworks (MOFs), which exhibit a unique combination of properties, are of particular interest as a tunable and porous matrix to host MAs. A high degree of control in the synthesis towards atom-efficient and application-oriented MA@MOF composites is required to derive specific structure-property relationships and in turn to enable design of functions on the molecular level. Due to the versatility of MA@MOF (derived) materials, their applications are not limited to the obvious field of catalysis, but increasingly include 'out of the box' applications, for example medical diagnostics and theranostics, as well as specialised (bio-)sensoring techniques. This review focuses on recent advances in the controlled synthesis of MA@MOF materials en route to atom-precise MAs. The main synthetic strategies, namely 'ship-in-bottle', 'bottle-around-ship', and approaches to achieve novel hierarchical MA@MOF structures are highlighted and discussed while identifying their potential as well as their limitations. Hereby, an overview of standard characterisation methods that enable a systematic analysis procedure and state-of-art techniques that localise MA within MOF cavities are provided. While the perspectives of MA@MOF materials in general have been reviewed various times in the recent past, few atom-precise MAs inside MOFs have been reported so far, opening opportunities for future investigation.

Microenvironment engineering of supported metal nanoparticles for chemoselective hydrogenation

Selective hydrogenation with supported metal catalysts widely used in the production of fine chemicals and pharmaceuticals often faces a trade-off between activity and selectivity, mainly due to the inability to adjust one factor of the active sites without affecting other factors. In order to solve this bottleneck problem, the modulation of the microenvironment of active sites has attracted more and more attention, inspired by the collaborative catalytic mode of enzymes. In this perspective, we aim to summarize recent advances in the regulation of the microenvironment surrounding supported metal nanoparticles (NPs) using porous materials enriched with organic functional groups. Insights on how the microenvironment induces the enrichment, oriented adsorption and activation of substrates through non-covalent interaction and thus determines the hydrogenation activity and selectivity will be particularly discussed. Finally, a brief summary will be provided, and challenges together with a perspective in microenvironment engineering will be proposed.

Ultrasmall Copper Nanoclusters in Zirconium Metal-Organic Frameworks for the Photoreduction of CO2

Encapsulating ultrasmall Cu nanoparticles inside Zr-MOFs to form core-shell architecture is very challenging but of interest for CO₂ reduction. We report for the first time the incorporation of ultrasmall Cu NCs into a series of benchmark Zr-MOFs, without Cu NCs aggregation, via a scalable room temperature fabrication approach. The Cu NCs@MOFs core-shell composites show much enhanced reactivity in comparison to the Cu NCs confined in the pore of MOFs, regardless of their very similar intrinsic properties at the atomic level. Moreover, introducing polar groups on the MOF structure can further improve both the catalytic reactivity and selectivity. Mechanistic investigation reveals that the Cu^I sites located at the interface between Cu NCs and support serve as the active sites and efficiently catalyze CO₂ photoreduction. This synergetic effect may pave the way for the design of low-cost and efficient catalysts for CO₂ photoreduction into high-value chemical feedstock.

Advances in plasmonic-based MOF composites, their bio-applications and perspectives in this field

INTRODUCTION

Nanomaterials have been used for bio-applications since the late 20st century. In an attempt to tailor and optimize their properties, and by extension their efficiency, composites have attracted considerable attention. In this regard, recent studies on plasmonic nanoparticles and metal-organic framework (NP@MOF) composites suggested these materials show great promise in this field.

AREAS COVERED

This review focused on the more recent scientific advances in the synthetic strategies to optimize plasmonic MOF nanocomposites currently available, as well as their bio-application, particularly as biosensors and therapy.

EXPERT OPINION

Plasmonic MOF nanocomposites have shown great potential as they combine the properties of both materials with proven efficiency in bio-application. On the one hand, nanoMOFs have proven their potential particularly as drug nanocarriers, owing to their exceptional porosity and tunability. On the other hand, plasmonic nanoparticles have been an asset for imaging and phototherapy. Different strategies have been reported to develop these nanocomposites, mainly including core-shell, encapsulation, and in situ reduction. In addition, advanced composite structures should be considered, such as mixed metal nanoparticles, hollow structures or the combination of several approaches. Specifically, plasmonic MOF nanocomposites prove to be attractive stimuli responsive drug delivery systems, phototherapeutic agents as well as highly sensitive biosensors.

Nanoparticle/metal-organic framework hybrid catalysts: elucidating the role of the MOF

Hybrid materials of metal-organic frameworks (MOFs) and nanoparticles (NPs) have attracted significant attention because of the wide variety of attractive properties derived from the two components. In the last decade, the development of synthesis techniques for NP/MOF composites was particularly significant. In the field of catalysis in particular, various synergistic effects that make the composites attractive catalysts have been reported. However, the role of MOFs in the composite catalysts is still not well understood and is being elucidated. In this feature article, we focus on recent progress in NP/MOF composite catalysts, concentrating on the analysis of the interaction between NPs and MOFs and the reaction mechanisms, together with the synthetic techniques used for NP/MOF hybrid materials.

Size-Selective Suzuki-Miyaura Coupling Reaction over Ultrafine Pd Nanocatalysts in a Water-Stable Indium-Organic Framework

Metal nanoparticles stabilized by crystalline metal-organic frameworks (MOFs) are highly promising for green heterogeneous catalysis. In this work, in situ formed ultrafine Pd nanocatalysts with an average size of 3.14 nm have been successfully immobilized into the mesopores or defects of a water-stable indium-based MOF by the double-solvent method and subsequent reduction. Significantly, the obtained Pd@InOF-1 displays an obvious and satisfactory size-selective effect in the Suzuki-Miyaura coupling reaction between arylboronic acids and aryl bromides. On the basis of the synergistic effect, microporous InOF-1 nanorods afford a confined space for improving the selectivity of target products while Pd nanoparticles endow abundant active sites for catalysis. Herein, choosing the smallest size reactant with only one benzene ring gives the highest isolated yield of 90%, and if the size is larger, the yield is obviously reduced or even the target product could not be collected. Looking forward, this demonstrated study not only assembles a well-designed Pd@MOF composite with unique micro-nanostructures but also delivers an impressive option for cross-coupling reaction, which has implications for the further development of MOF hybrids for sustainable applications.

Chemo-Biocascade Reactions Enabled by Metal–Organic Framework Micro-Nanoreactor

The one-pot combination of biocatalytic and chemocatalytic reactions represents an economically and ecologically attractive concept in the emerging cascade processes for manufacturing. The mutual incompatibility of biocatalysis and chemocatalysis, however, usually causes the deactivation of catalysts, the mismatching of reaction dynamic, and further challenges their integration into concurrent chemo-biocascades. Herein, we have developed a convenient strategy to construct versatile functional metal–organic framework micro-nanoreactors (MOF–MNRs), which can realize not only the encapsulation and protection of biocatalysts but also the controllable transmission of substances and the mutual communication of the incompatible chemo-biosystems. Importantly, the MOFs serving as the shell of MNRs have the capability of enriching the chemocatalysts on the surface and improving the activity of the chemocatalysts to sufficiently match the optimum aqueous reaction system of biocatalysts, which greatly increase the efficiency in the combined concurrent chemo-biocatalysis. Such strategy of constructing MOF–MNRs provides a unique platform for connecting the “two worlds” of chemocatalysis and biocatalysis.

Palladium decoration directed synthesis of ZIF-8 nanocubes with efficient catalytic activity for nitrobenzene hydrogenation

A palladium precursor (H₂PdCl₄) has been utilized as a novel structure-directing agent for controlling the morphology of ZIF-8. Using reverse micelles as nanoreactors, the Pd/ZIF-8 nanocomposite with a uniform size distribution is obtained. It is revealed that Pd(II) can selectively coordinate with the (100) plane of ZIF-8. As a result, the morphology of ZIF-8 is transformed from rhombic dodecahedral to cubic. After hydrogen treatment, the as-obtained Pd NPs/ZIF-8 nanocubes show efficient catalytic activity for nitrobenzene hydrogenation, which is higher than that of the commercially available Pd/C catalyst.

Confined Assembly of Colloidal Nanorod Superstructures by Locally Controlling Free-Volume Entropy in Nonequilibrium Fluids

Long-range-ordered structures of nanoparticles with controllable orientation have advantages in applications toward sensors, photoelectric conversion, and field-effect transistors. The assembly process of nanorods in colloidal systems undergoes a nonequilibrium process from dispersion to aggregation. A variety of assembly methods such as solvent volatilization, electromagnetic field induction, and photoinduction are restricted to suppress local perturbations during the nonequilibrium concentration of nanoparticles, which are adverse to controlling the orientation and order of assembled structures. Here, a confined assembly method is reported by locally controlling free-volume entropy in nonequilibrium fluids to fabricate microstructure arrays based on colloidal nanorods with controllable orientation and long-range order. The unique fluid dynamics of the liquid bridge is utilized to form a local region, where the free volume entropy reduction triggers assembly near the three-phase contact line (TPCL), allowing nanorods to assemble in 2D closest packing parallel to the TPCL for the maximum Gibbs free energy reduction. By manipulating the orientation of liquid flow, microstructures are assembled with programmable geometry, which sustains polarized photoluminescence and polarization-dependent photodetection. This confined assembly method opens up perspectives on assemblies of nanomaterials with controllable orientation and long-range order as a platform for multifunctional integrated devices.

Room-temperature coalescence of Pd nanoparticles with sacrificial templates and sintering agents, and their catalytic activities in the Suzuki coupling reaction

Porous metal structures are very useful for heterogeneous catalysts in organic syntheses. This study reports a novel method to fabricate porous Pd structures by room-temperature (RT) coalescence of Pd nanoparticles (Pd NPs). First, oleylamine-capped Pd NPs were synthesized, and then Pd NP pastes were fabricated by mixing with tri-n-octylphosphine oxide as a sacrificial template. Finally, the Pd NP paste was dipped into methanol containing a sintering agent. When KOH was used as the sintering agent, porous Pd structures could be successfully obtained at RT. The catalytic activities of porous Pd structures were investigated in the Suzuki coupling reaction and they increased with the increase of the KOH concentration in the sintering process. These results indicate that pre-activation of porous Pd structures by KOH increased the catalytic activities.

Metal-Organic Framework Surface Functionalization Enhancing the Activity and Stability of Palladium Nanoparticles for Carbon-Halogen Bond Activation

Supported metal nanocatalyst is one of the efficient tools for organic transformations. However, catalyst deactivation caused by the migration, aggregation, and leaching of active metal species in the reaction process remains challenging. Herein, a metal-organic framework (MOF), MIL-101, was employed to covalently graft the PPh₃ ligand on its surface and then supported palladium nanoparticles (Pd NPs), affording Pd/MIL-101-PPh₃. A variety of spectral characterizations and DFT calculation reveal that there is an electron-donating effect of the MOF surface PPh₃ toward Pd NPs, which markedly boosts the activation of the carbon-halogen bond in aryl halides. Consequently, Pd/MIL-101-PPh₃ exhibits excellent activity for the three-component reaction of 2-iodoaniline, CO₂, and isocyanide, as well as Suzuki-Miyaura and Heck coupling reactions, far exceeding amino-functionalized Pd/MIL-101-NH₂, naked Pd/MIL-101, and other commercial-supported Pd catalysts. Furthermore, Pd/MIL-101-PPh₃ can also frustrate the migration, aggregation, and leaching of reactive Pd species in the reaction process due to the molecular fence effect generated by MOF surface functionalization.

Metal organic framework-based Janus nanomaterials: rational design, strategic fabrication and emerging applications

Janus nanoparticles (JNPs) with dual segments comprising chemically distinct compositions have garnered the attention of researchers in the past few years. The combination of different materials with diversified morphology, topology, and distinct physico-chemical characteristics into the single Janus nanocrystal has yielded multifarious capabilities for a myriad of emerging applications involving catalysis, gas separation, electro-catalysis, adsorption and energy storage. However, the traditional Janus entities significantly lack the need for populous active sites and high surface area. To overcome the textural hurdles and improve the functionalities of JNPs, porous MOFs were eventually introduced into Janus particles. MOFs are well endowed with varied pore apertures, structures, large surface areas and tailored characteristics, making them potentially invaluable for Janus fabrication. Depending upon the usage, MOFs can be explored to design Metal@MOF, polymetalic@MOF, MOF@MOF and MOF-derived JNPs. In this regard, we have represented a holistic summarization of the design, synthesis and emerging applications of a rising class of multi-functionalized MOF-based Janus nanomaterials. Moreover, this article will significantly aid researchers with a vision of creating dual-composition porous nanomaterials as the MOF-based Janus nanoparticles is at infancy.

Destruction of 4-chlorophenol by the hydrogen-accelerated catalytic Fenton system enhanced by Pd/NH2-MIL-101(Cr)

4-chlorophenol (4-CP) could be rapidly mineralized by using Fenton reaction. However, massive iron sludge will be generated because of the excessive consumption of iron salt and poor recycling of Fe^III back to Fe^II. In this paper, by introducing hydrogen gas and solid catalyst Pd/NH₂-MIL-101(Cr) to classic Fenton reactor, the novel system named MHACF-NH₂-MIL-101(Cr) was constructed. Much less Fe^II was needed in this system because the hydrogen could significantly accelerate the regeneration of Fe^II. The catalyst improved the utilization of H₂. The degradation reaction of 4-CP could be driven by using only trace amount of Fe^II. It could be rapidly degraded by the hydroxyl radical detected by the 4-Hydroxy-benzoicacid which is the oxidative product of benzoic acid and hydroxyl radical. The effects of dosage of ferrous salt, H₂O₂ and catalyst, H₂ flow, Pd content, and initial pH of and concentration of 4-CP aqueous solution were investigated. The robustness and morphology changes of this catalytic material were also systematically analysed. By clarifying the role of this solid MOFs material in this hydrogen-mediated Fenton reaction system, it will provide a new direction for the research and development of advanced oxidation processes with high efficiency and low sludge generation in future.

Rational Functionalization of UiO-66 with Pd Nanoparticles: Synthesis and In Situ Fourier-Transform Infrared Monitoring

Functionalization of metal-organic frameworks (MOFs) with noble metal nanoparticles (NPs) is a challenging task. Conventional impregnation by metals often leads to agglomerates on the surface of MOF crystals. Functional groups on linkers interact with metal precursors and promote the homogeneous distribution of NPs in the pores of MOFs, but their uncontrolled localization can block channels and thus hinder mass transport. To overcome this problem, we created nucleation centers only in the defective pores of the UiO-66 MOF via the postsynthesis exchange. First, we have introduced defects into UiO-66 using benzoic acid as a modulator. Second, the modulator was exchanged for amino-benzoic acid. As a result, amino groups have decorated mainly the defective pores and attracted the Pd precursor after impregnation. The interaction of the metal precursor with amino groups and the growth of NPs were monitored by in situ infrared spectroscopy. Three processes were distinguished: the gaseous HCl release, NH₂ reactivation, and growth of extended Pd surfaces. Uniform Pd NPs were located in the pores because of the homogeneous distribution of the precursor and pore diffusion-limited nucleation rate. Our work demonstrates an alternative approach of controlled Pd incorporation into UiO-66 that is of great importance for the rational design of heterogeneous catalysts.

Ligand Defect Density Regulation in Metal-Organic Frameworks by Functional Group Engineering on Linkers

Defects in solid materials vitally determine their physicochemical properties; however, facile regulation of the defect density is still a challenge. Herein, we demonstrate that the ligand defect density of metal-organic frameworks (MOFs) with a UiO-66 structural prototype is precisely regulated by tuning the linker groups (X = OMe, Me, H, F). Detailed analyses reveal that the ligand defect concentration is positively correlated with the electronegativity of linker groups, and Ce-UiO-66-F, constructed by F-containing ligands and Ce-oxo nodes, possesses the superior ligand defect density (>25%) and identifiable irregular periodicity. The increase in ligand defect density results in the reduction of the valence state and the coordination number of Ce sites in Ce-UiO-66-X, and this merit further validates the relationship between the defective structure and catalytic performance of CO₂ cycloaddition reaction. This facile, efficient, and reliable strategy may also be applicable to precisely constructing the defect density of porous materials in the future.

Modulating the Chemical Microenvironment of Pt Nanoparticles within Ultrathin Nanosheets of Isoreticular MOFs for Enhanced Catalytic Activity

The catalytic activity of metal nanoparticles (MNPs) embedded in metal-organic frameworks (MOFs) is affected by the electronic interactions between MNPs and MOFs. In this report, we fabricate a series of ultrathin nanosheets of isoreticular MOFs (NMOFs) with different metal nodes as supports and successfully encapsulate Pt NPs within these NMOFs, affording Pt@NMOF-Co, Pt@NMOF-Ni₁Co₁, Pt@NMOF-Ni₃Co₁, and Pt@NMOF-Ni nanocomposites. The microchemical environment on the surface of Pt NPs can be modulated by varying the metal nodes of NMOFs. The catalytic activity of the nanocomposites toward liquid-phase hydrogenation of 1-hexene shows obvious difference, in which Pt@NMOF-Ni possesses the highest activity followed by Pt@NMOF-Ni₃Co₁, Pt@NMOF-Ni₁Co₁, and Pt@NMOF-Co in a decreasing order of activity. Obviously, increasing gradually the amount of Ni²⁺ nodes in the carriers can improve the catalytic activity. The difference of catalytic activity of the nanocomposites might originate from the distinct electron interactions between Pt NPs and NMOFs, as ascertained by X-ray photoelectron spectroscopy spectrum and density functional theory calculations. This work provides a rare example that the catalytic activity of MNPs could be controlled by accurately regulating the microchemical environment using ultrathin NMOFs as supports.

Nanocage-based {In2Tm2}-organic framework for efficiently catalyzing the cycloaddition reaction of CO2 with epoxides and Knoevenagel condensation

The combination of [In2Tm2(μ2-OH)2(CO2)10(H2O)2] clusters and H5BDCP ligand generated a highly robust nanoporous MOF with high catalytic performance in the cycloaddition reaction of epoxides with CO2 and Knoevenagel condensation.