A Barium Titanate-on-Oxide Insulator Optoelectronics Platform

Photo-switchable Collectors for the Flotation of Lithium Aluminate for the Recycling of the Critical Raw Material Lithium

Flotation of the mineral lithium aluminate by application of the natural product punicine from Punica granatum and some derivatives as collectors is examined. Punicines, 1-(2',5'-dihydroxyphenyl)-pyridinium compounds, are switchable molecules whose properties can be changed reversibly. They exist as cations, neutral mesomeric betaines, anions, and dianions depending on the pH. In light, they form radicals. Five punicine derivatives were prepared which possess β-methyl, β-chlorine, γ-tert.-butyl, and γ-acetyl groups attached to the pyridinium ring, and a pyrogallol derivative. On the other hand, LiAlO2 reacts with water to give species such as LiAl2(OH)7 on its surface. Flotations were performed applying the punicines in daylight (3000 lux), in darkness (<40 lux) and under UV-irradiation (4500 lux, 390-400 nm). The pH of the suspension, the collector's concentration, the conditioning time as well as the flotation time were varied. The recovery rates strongly depend on these parameters. For example, the recovery rate of lithium aluminate was increased by 116 % on changing the lighting condition from daylight to darkness, when the pyrogallol derivative of punicine was applied. UV, FTIR, TGA and zeta potential measurements as well as DFT calculations were performed in order to gain insight into the chemistry of punicines on the surface of LiAlO2 and LiAl2(OH)7 in water which influence the flotation's results.

Lithium aluminate flotation by pH- and light-switchable collectors based on the natural product punicine

Derivatives of the natural product punicine [1-(2',5'-dihydroxyphenyl)pyridinium chloride] were developed as switchable collectors for the flotation of lithium-containing engineered artifical minerals (EnAMs). These EnAMs are e.g. formed by pyrometallurgical processing of end-of-life lithium-ion batteries. Depending on the pH value and the lighting conditions, punicines exist in water as cations, two different electrostatically neutral mesomeric betaines, anionic tripoles, radical cations or radical anions. The radical species form by photochemically induced disproportionation reactions. We prepared punicine derivatives introducing alkyl chains in the pyridinium moiety (4-methyl, 4-ethyl, 4-octyl and 4-undecanyl) to install hydrophobic groups and examined the recovery rates of the flotation of lithium aluminate (LiAlO2). We varied the lighting conditions (darkness, daylight, LED irradiation at λ = 390-400 nm) and the pH value, the collector's and frother's concentration, and the flotation time. With our collectors, recovery rates of lithium aluminate up to 90% were accomplished when the flotation was conducted in Hallimond tubes exposed to daylight at pH 11 in water.

Giant electric field-induced second harmonic generation in polar skyrmions

Electric field-induced second harmonic generation allows electrically controlling nonlinear light-matter interactions crucial for emerging integrated photonics applications. Despite its wide presence in materials, the figures-of-merit of electric field-induced second harmonic generation are yet to be elevated to enable novel device functionalities. Here, we show that the polar skyrmions, a topological phase spontaneously formed in PbTiO3/SrTiO3 ferroelectric superlattices, exhibit a high comprehensive electric field-induced second harmonic generation performance. The second-order nonlinear susceptibility and modulation depth, measured under non-resonant 800 nm excitation, reach ~54.2 pm V-1 and ~664% V-1, respectively, and high response bandwidth (higher than 10 MHz), wide operating temperature range (up to ~400 K) and good fatigue resistance (>1010 cycles) are also demonstrated. Through combined in-situ experiments and phase-field simulations, we establish the microscopic links between the exotic polarization configuration and field-induced transition paths of the skyrmions and their electric field-induced second harmonic generation response. Our study not only presents a highly competitive thin-film material ready for constructing on-chip devices, but opens up new avenues of utilizing topological polar structures in the fields of photonics and optoelectronics.

Engineering Refractive Index Contrast in Thin Film Barium Titanate-on-Insulator

Barium titanate-on-insulator has demonstrated excellent vertical optical confinement, low loss, and strong electro-optic properties. To fabricate a waveguide-based device, a region of higher refractive index must be created to confine a propagating mode, one way of which is through dry etching to form a ridge. However, despite recent progress achieved in etching barium titanate and similar materials, the sidewall and surface roughness resulting from the physical etching typically used limit the achievable ridge depth. This motivates the exploration of etch-free methods to achieve the required index contrast. Here, we introduce three etch-free methods to create a refractive index contrast in barium titanate-on-insulator, including a metal diffusion method, proton beam irradiation method, and crystallinity control method. Notably, molybdenum-diffused barium titanate leads to a large index change of up to 0.17. The methods provided in this work can be further developed to fabricate various on-chip barium titanate optical waveguide-based devices.

Effect of Eu3+ doping on structural and optical properties of zirconium titanate

The Europium activated (1-9 mol %) Zirconium Titanate nanoparticles (NPs) have been synthesized by the green solution combustion method using Aloe Vera gel extract as a reducing agent, followed by the calcination at 720 °C for 3hrs. All the synthesized samples crystallize in a pure orthorhombic crystal structure with the space group of Pbcn. The surface and bulk morphology were analyzed. The crystallite size increases, whereas the direct energy band gap was found to decrease with an increase in dopant concentration. Further, the effect of dopant concentration on the photoluminescence properties was studied. The presence of Eu³⁺ ion in the trivalent state in the host lattice was confirmed by its characteristic emission at 610 nm due to ⁵D₀→⁷F₂ (λ_ex = 464 nm). The CIE coordinates were found in the red region of the CIE 1931 diagram. The CCT coordinates lie in the range 6288-7125 K. The Judd-Ofelt parameters and derived quantities were analyzed. This theory confirms the high symmetry of Eu³⁺ ions in the host lattice. These findings imply that ZTO:Eu³⁺ can be employed as a nanopowder material in a red-emitting phosphor material.

Polyether-tethered imidazole-2-thiones, imidazole-2-selenones and imidazolium salts as collectors for the flotation of lithium aluminate and spodumene

Imidazolium salts were prepared which possess 2-ethoxyethyl pivalate or 2-(2-ethoxyethoxy)ethyl pivalate groups as amphiphilic side chains with oxygen donors as well as n-butyl substituents as hydrophobic groups. The N-heterocyclic carbenes of the salts, characterized by 7Li and 13C NMR spectroscopy as well as by Rh and Ir complex formation, were used as starting materials for the preparation of the corresponding imidazole-2-thiones and imidazole-2-selenones. Flotation experiments in Hallimond tubes under variation of the air flow, pH, concentration and flotation time were performed. The title compounds proved to be suitable collectors for the flotation of lithium aluminate and spodumene for lithium recovery. Recovery rates up to 88.9% were obtained when the imidazole-2-thione was used as collector.

Photonic Assemblies of Randomly Oriented Nanocrystals for Engineered Nonlinear and Electro-Optic Effects

Nonlinear crystals that have a noncentrosymmetric crystalline structure, such as lithium niobate (LiNbO₃) and barium titanate (BaTiO₃) exhibit nonzero second-order tensor susceptibilities (χ⁽²⁾) and linear electro-optic coefficients (r _ij ). The constraints associated with top-down nanofabrication methods have led to bottom up approaches to harness the strong nonlinearities and electro-optical properties. Here, we present an overview of photonic assemblies made of randomly oriented noncentrosymmetric nanocrystals via bottom-up fabrication methods. In this configuration, nanocrystals can form objects with tunable dimensions, increased complexity, and a great span of symmetry level, ranging from thin layers to spheres. At the same time, according to their shape, photonic assemblies may support optical modes, that is, Mie or guided, which can tailor linear optical properties and enhance nonlinear and electro-optic responses. As a result, assemblies of noncentrosymmetric nanocrystals can form a disruptive platform to realize photonic integrated devices free of etching process and over large surface areas. Last, we foresee potential applications of noncentrosymmetric nanocrystals in various fields of nano-optics and sensing.