Optimizing Atomic Hydrogen Desorption of Sulfur-Rich NiS1+ x Cocatalyst for Boosting Photocatalytic H2 Evolution

Manipulating heterointerface to boost formation and desorption of intermediates for highly efficient alkaline hydrogen evolution

Promoting water dissociation and H intermediate desorption play a pivotal role in achieving highly efficient hydrogen evolution reaction (HER) in alkaline media but remain a great challenge. Herein, we rationally develop a unique W-doped NiSx/Ni heterointerface as a favorable HER electrocatalyst which was directly grown on the Cu nanowire foam substrate (W-NiSx/Ni@Cu) by the electrodeposition strategy. Benefiting from the rational design of the interfaces, the electronic coupling of the W-NiSx/Ni@Cu can be efficiently modulated to lower the HER kinetic barrier. The obtained W-NiSx/Ni@Cu exhibits an enhanced HER activity with a low overpotential of 38 mV at 10 mA cm-2 and a small Tafel value of 27.5 mV dec-1, and high stability during HER catalysis. In addition, in-situ Raman spectra reveal that the Ni2+ active sites preferentially adsorb OH intermediate. The theoretical calculation confirms that the water dissociation is accelerated by the construction of W-NiSx/Ni heterointerface and H intermediate desorption can be also promoted by H spillover from S active sites in W-NiSx to Ni active sites in metal Ni. This work offers a valuable reference for rational designing heterointerface of electrocatalysts and provides an available method to accelerate the HER kinetics for the ampere-level current density under low overpotential.

Interfacial tuning in FeP/ZnIn2S4 Ohm heterojunction: Enhanced photocatalytic hydrogen production via Zn-P charge bridging

Interfacial regulation is key to photocatalytic performance, yet modulating interfacial charge transfer in heterostructures remains challenging. Herein, a novel nanoflower-like FeP/ZnIn2S4 Ohm heterostructure is first designed, with Zn atoms in ZnIn2S4 (ZIS) acting as potential anchoring sites around P atoms, forming liganded Zn-P bonds. Combining 1D FeP nanowires and 2D ZIS nanosheets enhances the mobility of photogenerated electrons. The synergistic chain-type "electron pickup" mechanism of the Ohm heterojunction coupled with the Zn-P bond speeds up electron transport at the interface. The Ohm heterojunction initiates an internal electric field, creating a driving force to further transfer photogenerated electrons through the Zn-P rapid electron transport channel to FeP, which acts as a reservoir for active sites to release H2. The optimized FeP/ZIS demonstrates a remarkable H2 evolution rate at 4.36 mmol h-1 g-1, 3.6 times that of pristine ZIS. This work provides novel insights into optimizing photocarrier dynamics via interfacial microenvironment modulation.

Enhanced Photocatalytic Hydrogen Evolution of In2S3 by Decorating In2O3 with Rich Oxygen Vacancies

The hydrogen (H2) evolution rates of photocatalysts suffer from weak oxidation and reduction ability and low photogenerated charge carrier separation efficiency. Herein, by combining band-gap structure optimization and vacancy modulation through a one-step hydrothermal method, In2O3 containing oxygen vacancy (Ov/In2O3) is simply introduced into In2S3 to promote photocatalytic hydrogen evolution. Specifically, the change in the sulfur source ratio can induce the coexistence of Ov/In2O3 and In2S3 in a high-temperature hydrothermal process. Under light irradiation, In2S3@Ov/In2O3-0.1 nanosheets hold a remarkable average H2 evolution rate up to 4.04 mmol g-1 h-1, which is 32.14, 11.91, and 2.25-fold better than those of pristine In2S3, In2S3@Ov/In2O3-0.02, and In2S3@Ov/In2O3-0.25 nanosheets, respectively. The ultraviolet-visible (UV-vis) diffuse reflectance and photoluminescence (PL) spectra reveal that the formation of Ov/In2O3 in In2S3 optimizes the band-gap structure and accelerates the migration of the photogenerated charge carrier of In2S3@Ov/In2O3-x nanosheets, respectively. Both the enhancement of oxidation and reduction ability and photogenerated charge carrier separation ability are responsible for the remarkable improvement in photocatalytic H2 evolution performance. This work provides a new strategy to prepare a composite of metal sulfide and metal oxide through a one-step hydrothermal method.

Black Ultrathin Single-Crystalline Flakes of CuVP2S6 and CuCrP2S6 for Near-Infrared-Driven Photocatalytic Hydrogen Evolution

The development of new near-infrared-responsive photocatalysts is a fascinating and challenging approach to acquire high photocatalytic hydrogen evolution (PHE) performance. Herein, near-infrared-responsive black CuVP2S6 and CuCrP2S6 flakes, as well as CuInP2S6 flakes, are designed and constructed for PHE. Atom-resolved scanning transmission electron microscopy images and X-ray absorption fine structure evidence the formation of ultrathin single-crystalline sheet-like structure of CuVP2S6 and CuCrP2S6. The synthetic CuVP2S6 and CuCrP2S6, with a narrow bandgap of ≈1.0 eV, shows the high light-absorption edge exceeding 1100 nm. Moreover, through the femtosecond-resolved transient absorption spectroscopy, CuCrP2S6 displays the efficient charge transfer and long charge lifetime (18318.1 ps), which is nearly 3 and 29 times longer than that of CuVP2S6 and CuInP2S6, respectively. In addition, CuCrP2S6, with the appropriate d-band and p-band, is thermodynamically favorable for the H+ adsorption and H2 desorption by contrast with CuVP2S6 and CuInP2S6. As a result, CuCrP2S6 exhibits high PHE rates of 9.12 and 0.66 mmol h-1 g-1 under simulated sunlight and near-infrared light irradiation, respectively, far exceeding other layered metal phospho-sulfides. This work offers a distinctive perspective for the development of new near-infrared-responsive photocatalysts.

Strong Interactions between Au Nanoparticles and BiVO4 Photoanode Boosts Hole Extraction for Photoelectrochemical Water Splitting

Strong metal-support interaction (SMSI) is widely proposed as a key factor in tuning catalytic performances. Herein, the classical SMSI between Au nanoparticles (NPs) and BiVO4 (BVO) supports (Au/BVO-SMSI) is discovered and used innovatively for photoelectrochemical (PEC) water splitting. Owing to the SMSI, the electrons transfer from V4+ to Au NPs, leading to the formation of electron-rich Au species (Auδ-) and strong electronic interaction (i.e., Auδ--Ov-V4+), which readily contributes to extract photogenerated holes and promote charge separation. Benefitted from the SMSI effect, the as-prepared Au/BVO-SMSI photoanode exhibits a superior photocurrent density of 6.25 mA cm-2 at 1.23 V versus the reversible hydrogen electrode after the deposition of FeOOH/NiOOH cocatalysts. This work provides a pioneering view for extending SMSI effect to bimetal oxide supports for PEC water splitting, and guides the interfacial electronic and geometric structure modulation of photoanodes consisting of metal NPs and reducible oxides for improved solar energy conversion efficiency.

Organizing Photosensitive and Photothermal Single-Sites Uniformly in a Trimetallic Metal-Organic Framework for Efficient Photocatalytic Hydrogen Evolution

Effective combination of the photosensitivity and photothermal property in photocatalyst is vital to achieve the maximum light utilization for superior photocatalytic efficiency. Herein, this work successfully organizes photosensitive Cd-NS single-sites and photothermal Ni-NS single-sites uniformly at a molecular level within a tailored trimetallic metal-organic framework. The optimized Ho6-Cd0.76Ni0.24-NS exhibits a superior photocatalytic hydrogen evolution rate of 40.06 mmol g-1 h-1 under visible-light irradiation and an apparent quantum efficiency of 29.37% at 420 nm without using cocatalysts or photosensitizers. A systematical mechanism study reveals that the uniformly organized photosensitive and photothermal single-sites have synergistic effect, which form ultrashort pathways for efficient transport of photoinduced electrons, suppress the recombination of photogenerated charge carriers, hence promote the hydrogen evolution activity. This work provides a promising approach for organizing dual-functional single-sites uniformly in photocatalyst for high-performance photocatalytic activity.

Unveiling the Synergistic Role of Frustrated Lewis Pairs in Carbon-Encapsulated Ni/NiOx Photothermal Cocatalyst for Enhanced Photocatalytic Hydrogen Production

The development of high-density and closely spaced frustrated Lewis pairs (FLPs) is crucial for enhancing catalyst activity and accelerating reaction rates. However, constructing efficient FLPs by breaking classical Lewis bonds poses a significant challenge. Here, this work has made a pivotal discovery regarding the Jahn-Teller effect during the formation of grain boundaries in carbon-encapsulated Ni/NiOx (Ni/NiOx@C). This effect facilitates the formation of high-density O (VO) and Ni (VNi) vacancy sites with different charge polarities, specifically FLP-VO-C basic sites and FLP-VNi-C acidic sites. The synergistic interaction between FLP-VO-C and FLP-VNi-C sites not only reduces energy barriers for water adsorption and splitting, but also induces a strong photothermal effect. This mutually reinforcing effect contributes to the exceptional performance of Ni/NiOx@C as a cocatalyst in photothermal-assisted photocatalytic hydrogen production. Notably, the Ni/NiOx@C/g-C3N4 (NOCC) composite photocatalyst exhibits remarkable hydrogen production activity with a rate of 10.7 mmol g-1 h-1, surpassing that of the Pt cocatalyst by 1.76 times. Moreover, the NOCC achieves an impressive apparent quantum yield of 40.78% at a wavelength of 380 nm. This work paves the way for designing novel defect-state multiphase cocatalysts with high-density and adjacent FLP sites, which hold promise for enhancing various catalytic reactions.

Noble-Metal-Free Single- and Dual-Atom Catalysts for Artificial Photosynthesis

Artificial photosynthesis enables direct solar-to-chemical energy conversion aimed at mitigating environmental pollution and producing solar fuels and chemicals in a green and sustainable approach, and efficient, robust, and low-cost photocatalysts are the heart of artificial photosynthesis systems. As an emerging new class of cocatalytic materials, single-atom catalysts (SACs) and dual-atom catalysts (DACs) have received a great deal of current attention due to their maximal atom utilization and unique photocatalytic properties, whereas noble-metal-free ones impart abundance, availability, and cost-effectiveness allowing for scalable implementation. This review outlines the fundamental principles and synthetic methods of SACs and DACs and summarizes the most recent advances in SACs (Co, Fe, Cu, Ni, Bi, Al, Sn, Er, La, Ba, etc.) and DACs (CuNi, FeCo, InCu, KNa, CoCo, CuCu, etc.) based on non-noble metals, confined on an arsenal of organic or inorganic substrates (polymeric carbon nitride, metal oxides, metal sulfides, metal-organic frameworks, carbon, etc.) acting as versatile scaffolds in solar-light-driven photocatalytic reactions, including hydrogen evolution, carbon dioxide reduction, methane conversion, organic synthesis, nitrogen fixation, hydrogen peroxide production, and environmental remediation. The review concludes with the challenges, opportunities, and future prospects of noble-metal-free SACs and DACs for artificial photosynthesis.

Enhancing photocatalytic H2O2 production with Au co-catalysts through electronic structure modification

Gold-based co-catalysts are a promising class of materials with potential applications in photocatalytic H2O2 production. However, current approaches with Au co-catalysts show limited H2O2 production due to intrinsically weak O2 adsorption at the Au site. We report an approach to strengthen O2 adsorption at Au sites, and to improve H2O2 production, through the formation of electron-deficient Auδ+ sites by modifying the electronic structure. In this case, we report the synthesis of TiO2/MoSx-Au, following selective deposition of Au onto a MoSx surface which is then further anchored onto TiO2. We further show that the catalyst achieves a significantly increased H2O2 production rate of 30.44 mmol g-1 h-1 in O2-saturated solution containing ethanol. Density functional theory calculations and X-ray photoelectron spectroscopy analysis reveal that the MoSx mediator induces the formation of electron-deficient Auδ+ sites thereby decreasing the antibonding-orbital occupancy of Au-Oads and subsequently enhancing O2 adsorption. This strategy may be useful for rationally designing the electronic structure of catalyst surfaces to facilitate artificial photosynthesis.

Atomically Contacted Cs3Bi2Br9 QDs@UiO-66 Composite for Photocatalytic CO2 Reduction

Metal halide perovskite quantum dots (QDs) are widely studied in the field of photocatalytic CO2 due to their strong light absorption and long carrier migration length. However, it can not exhibit high catalytic performance because of the radiative recombination and the lack of effective catalytic sites. Metal organic frameworks (MOFs) encapsulated QDs can not only solve the aforementioned problems, but also maintain their own unique characteristics with ultra-high specific surfaces area and abundant metal sites. In this work, lead-free bismuth-based halide perovskite QDs are encapsulated into Zr-based MOF (UiO-66), which combines the advantages with high power conversion efficiency of QDs and the high surface area and porosity of UiO-66. In addition, benefiting from the close contact between the Cs3Bi2Br9 QDs and the UiO-66 enables the photogenerated electrons in the QDs to be rapidly transferred to the MOF. As a result, the Cs3Bi2Br9@UiO-66 composite exhibits a higher yield for photocatalytic CO2 reduction than that of the prepared large-sized composite of Cs3Bi2Br9 and UiO-66.

Advances and challenges in the modification of photoelectrode materials for photoelectrocatalytic water splitting

With the increasing consumption of fossil fuels, the development of clean and renewable alternative fuels has become a top priority. Hydrogen (H2) is an ideal primary clean energy source for its extremely high gravimetric energy density, carbon-free combustion, and abundant natural resources. Photoelectrocatalytic (PEC) water splitting is among the most promising approaches for converting sunlight and water into H2. However, the cost-effectiveness and the overall solar to hydrogen conversion efficiency of PEC water splitting are still big challenges. In the past few decades, several studies have been devoted to this technology, and it is essential to develop economical photoelectrocatalysts with high conversion efficiency. Therefore, there is an urgent need for a comprehensive and updated review of recent advances in the design, manufacture, and modification of efficient PEC water splitting systems. This review first starts with the basic mechanism of photoelectrochemical water splitting. Then the problems in PEC water splitting are discussed, and the methods of photoelectrode modulation such as nanostructure fabrication, doping engineering, surface modification, and heterojunction construction are introduced. Finally, the critical challenges and future trends/perspectives in the PEC water splitting are discussed.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

Schottky junction enhanced H2 evolution for graphitic carbon nitride-NiS composite photocatalysts

As one of the most promising photocatalysts for H2 evolution, graphitic carbon nitride (CN) has many appealing attributes. However, the activity of pristine CN remains unsatisfactory due to severe charge carrier recombination and lack of active sites. In this study, we report a two-step approach for the synthesis of CN nanotubes (TCN) loaded with NiS nanoparticles. The resulting composite photocatalysts gave a H2 evolution rate of 752.9 μmol g-1 h-1, which is 42.3 times higher compared to the pristine CN photocatalyst. Experimental and simulation results showed that the Schottky junction which was formed between TCN and NiS was key to achieving high activity. This is because the formation of Schottky junction prevented the backflow of electrons from NiS to TCN, which improved charge separation efficiency. More importantly, it also led to the accumulation of electrons on NiS, which significantly weakened the SH bond, such that the intermediate hydrogen species desorbed more easily from NiS surface to promote H2 evolution activity.

Solar-driven CO2-to-ethanol conversion enabled by continuous CO2 transport via a superhydrophobic Cu2O nano fence

The overall photocatalytic CO2 reduction reaction presents an eco-friendly approach for generating high-value products, specifically ethanol. However, ethanol production still faces efficiency issues (typically formation rates <605 μmol g-1 h-1). One significant challenge arises from the difficulty of continuously transporting CO2 to the catalyst surface, leading to inadequate gas reactant concentration at reactive sites. Here, we develop a mesoporous superhydrophobic Cu2O hollow structure (O-CHS) for efficient gas transport. O-CHS is designed to float on an aqueous solution and act as a nano fence, effectively impeding water infiltration into its inner space and enabling CO2 accumulation within. As CO2 is consumed at reactive sites, O-CHS serves as a gas transport channel and diffuser, continuously and promptly conveying CO2 from the gas phase to the reactive sites. This ensures a stable high CO2 concentration at reactive sites. Consequently, O-CHS achieves the highest recorded ethanol formation rate (996.18 μmol g-1 h-1) to the best of our knowledge. This strategy combines surface engineering with geometric modulation, providing a promising pathway for multi-carbon production.

Nanoflower-like graphitic carbon nitride aerogel: Artful cyanuric acid-controlled synthesis and enhanced photocatalytic hydrogen evolution activity

The previously reported studies on cyanuric acid-assembly strategy usually ignores the promoting function of cyanuric acid in the production of g-C3N4, limiting the development of molecular assembly strategies. In this study, a cyanuric acid-controlled synthesis strategy involving the pre-assembly of cyanuric acid with melamine and subsequent one-step calcination was developed to produce a three-dimensional (3D) nanoflower-like graphitic carbon nitride (g-C3N4) aerogel. Some cyanuric acid molecules underwent a polycondensation reaction with melamine during the pre-assembly process and finally polymerized into the g-C3N4 structure during subsequent calcination. Meanwhile, the remaining cyanuric acid molecules assembled with melamine via hydrogen-bond interactions and underwent incomplete decomposition during subsequent calcination, which not only promoted the production of 3D nanoflower-like aerogel structures, but also introduced the carbonyl (CO) and hydroxyl (-OH) groups onto the g-C3N4 surface, resulting in the successful generation of a 3D nanoflower-like oxygen-modified g-C3N4 aerogel. Moreover, the fabricated g-C3N4 aerogel exhibited a greatly enhanced H2 production rate (1573 μmol h-1 g-1), which is ∼ 6.6 times higher than that of bulk g-C3N4 (239 μmol h-1 g-1) owing to the synergistic promotion function of ultrathin nanoflower-like aerogel and oxygen modification structures. This strategy provides a theoretical basis for the development of highly efficient g-C3N4 photocatalysts via molecular assembly.

Dual-plasmonic Au@Cu7S4 yolk@shell nanocrystals for photocatalytic hydrogen production across visible to near infrared spectral region

Near infrared energy remains untapped toward the maneuvering of entire solar spectrum harvesting for fulfilling the nuts and bolts of solar hydrogen production. We report the use of Au@Cu7S4 yolk@shell nanocrystals as dual-plasmonic photocatalysts to achieve remarkable hydrogen production under visible and near infrared illumination. Ultrafast spectroscopic data reveal the prevalence of long-lived charge separation states for Au@Cu7S4 under both visible and near infrared excitation. Combined with the advantageous features of yolk@shell nanostructures, Au@Cu7S4 achieves a peak quantum yield of 9.4% at 500 nm and a record-breaking quantum yield of 7.3% at 2200 nm for hydrogen production in the absence of additional co-catalysts. The design of a sustainable visible- and near infrared-responsive photocatalytic system is expected to inspire further widespread applications in solar fuel generation. In this work, the feasibility of exploiting the localized surface plasmon resonance property of self-doped, nonstoichiometric semiconductor nanocrystals for the realization of wide-spectrum-driven photocatalysis is highlighted.

Evidence for an Interface of Hybrid Cocatalysts Favoring Photocatalytic Hydrogen Evolution Kinetics

Hybrid cocatalysts have great application potential for improving the photocatalytic hydrogen evolution performance of semiconductors. The interfaces between components of hybrid cocatalysts make a great contribution to the improvement, but the associated mechanisms remain unclear. Herein, we prepared and tested three comparative CdS-based photocatalysts with NiS, NiS/Ni9S8, and Ni9S8 as the cocatalysts separately. The emphasis is placed on investigating the effect of the NiS/Ni9S8 interfaces on the photocatalytic hydrogen evolution performance of CdS. NiS/Ni9S8 exhibits a higher ability than NiS and Ni9S8 in making CdS a more active photocatalyst for water splitting. It shows that NiS, NiS/Ni9S8, and Ni9S8 perform similarly in terms of promoting the charge transfer and separation of CdS based on steady-state and time-resolved photoluminescence studies. At the same time, the linear sweep voltammetry and electrochemical impedance spectroscopy tests combined with the density functional theory calculations reveal that the component interfaces of NiS/Ni9S8 enable us to lower the water splitting activation energy, the charge-transfer resistance from the cocatalyst to sacrificial agent, and hydrogen adsorption Gibbs free energy. It is evidenced from this work that component interfaces of hybrid cocatalysts play a vital role in accelerating the dynamics of hydrogen evolution reactions.

Rapid Charge Transfer Endowed by Interfacial Ni-O Bonding in S-scheme Heterojunction for Efficient Photocatalytic H2 and Imine Production

Cooperative coupling of H2 evolution with oxidative organic synthesis is promising in avoiding the use of sacrificial agents and producing hydrogen energy with value-added chemicals simultaneously. Nonetheless, the photocatalytic activity is obstructed by sluggish electron-hole separation and limited redox potentials. Herein, Ni-doped Zn0.2 Cd0.8 S quantum dots are chosen after screening by DFT simulation to couple with TiO2 microspheres, forming a step-scheme heterojunction. The Ni-doped configuration tunes the highly active S site for augmented H2 evolution, and the interfacial Ni-O bonds provide fast channels at the atomic level to lower the energy barrier for charge transfer. Also, DFT calculations reveal an enhanced built-in electric field in the heterojunction for superior charge migration and separation. Kinetic analysis by femtosecond transient absorption spectra demonstrates that expedited charge migration with electrons first transfer to Ni2+ and then to S sites. Therefore, the designed catalyst delivers drastically elevated H2 yield (4.55 mmol g-1  h-1 ) and N-benzylidenebenzylamine production rate (3.35 mmol g-1  h-1 ). This work provides atomic-scale insights into the coordinated modulation of active sites and built-in electric fields in step-scheme heterojunction for ameliorative photocatalytic performance.

4-Methyl-5-vinyl thiazole modified Ni-MOF/g-C3N4/CdS composites for efficient photocatalytic hydrogen evolution without precious metal cocatalysts

The construction of heterojunction systems is an effective way to efficiently generate hydrogen by water photolysis. In this work, Ni-MOF (trimesic acid, (BTC)) and g-C3N4 (denoted as CN) were combined, and then Ni-MOF/CN was modified by 4-Methyl-5-vinyl thiazole (denoted as MVTh). Finally, CdS was loaded on the surface of Ni-MOF/CN/MVTh to prepare the photocatalyst Ni-MOF/g-C3N4/MVTh/CdS (denoted as Ni/CN/M/Cd) with a triangular closed-loop path heterojunction for the first time. As a photocatalyst without precious metal cocatalysts, Ni/CN/M/Cd displayed high H2 evolution (17.844 mmol·g-1·h-1) under an optimum CdS loading of 40 wt%. The H2 evolution rate was approximately 79 times that of Ni-MOF/CN and exceeded those of almost all catalysts based on MOF/CN in the literature. The triangular closed-loop heterojunction formed between Ni-MOF, g-C3N4, and CdS could realize the directional migration of photocarriers and significantly diminished the transfer resistance of carriers. The Ni2+ in Ni-MOF provided many cocatalytic sites for H2 evolution via g-C3N4 and CdS. Furthermore, charge carrier separation in Ni-MOF/CN/CdS improved after the innovative addition of MVTh. This study provides a reference for the construction of a closed-loop heterojunction system without precious metal cocatalysts.

Constructing Dual Cocatalysts of Ni2P-NiS-Decorated TiO2 for Boosting Photocatalytic H2 Evolution

The loading of cocatalysts is an effective approach to optimize the separation of carriers during photocatalytic processes. Among them, cocatalysts often work independently during the photocatalytic production of H2. However, an investigation of the synergistic effect of dual cocatalysts is beneficial for further promoting photocatalytic H2 production activity. In this work, dual cocatalyst Ni2P-NiS-modified TiO2 nanosheets were fabricated through a solvent evaporation method. The investigation indicates that Ni2P-NiS can widen the light absorption range and reduce the contact angle between TiO2 and water from 26.71 to 8.27°, which facilitates the adsorption of water molecules. Besides, the introduction of Ni2P-NiS can decrease the overpotential of H2 evolution and induce more electrochemically active surface area. The photocatalytic tests show that the H2 production rate of 15% Ni2P-NiS/TiO2 can reach up to 4891.6 μmol·g-1·h-1, which is 30.2, 4.4, and 1.3 times than pure TiO2 (161.8 μmol·g-1·h-1), 15% Ni2P/TiO2 (1112.1 μmol·g-1·h-1), and 15% NiS/TiO2 (3678.1 μmol·g-1·h-1), respectively. The enhancement mechanism of photocatalytic H2 production is attributed to the Schottky barrier effect between Ni2P-NiS nanoparticles and TiO2 nanosheets, which can enormously promote the interface charge separation and transfer, and enhance the kinetics of H2 production. This work provides a potential strategy for enhancement H2 production using appropriate dual cocatalyst-decorated semiconductor materials.

Promoted Photocatalytic Hydrogen Evolution by Tuning the Electronic State of Copper Sites in Metal-Organic Supramolecular Assemblies

The electronic state in terms of charge and spin of metal sites is fundamental to govern the catalytic activity of a photocatalyst. Herein, we show that modulation of the electronic states of Cu sites, without changing the coordination environments, of two metal-organic supramolecular assemblies based on π⋅⋅⋅π stacking can significantly improve photocatalytic activity. The use of these heterogeneous photocatalysts, without using noble metal cocatalysts, resulted in an increase of the hydrogen production rate from 522 to 3620 μmol h-1  g-1 . A systematical analysis revealed that the charge density and spin density of the metal centers are efficiently modulated via the modulation of the coordination fields around active copper (II) centers by the variation of the non-coordination groups of terminal ligands, leading to the significant enhancement of photocatalytic activity. This work provides an insight into the electronic state of active metal centers for designing high-performance photocatalysts.

Free-Electron Inversive Modulation to Charge Antibonding Orbital of ReS2 Cocatalyst for Efficient Photocatalytic Hydrogen Generation

The free electron transfer between cocatalyst and photocatalyst has a great effect on the bonding strength between the active site and adsorbed hydrogen atom (Hads ), but there is still a lack of effective means to purposely manipulate the electron transfer in a beneficial direction of H adsorption/desorption activity. Herein, when ReSx cocatalyst is loaded on TiO2 surface, a spontaneous free-electron transfer from ReSx to TiO2 happens due to the smaller work function of ReSx , causing an over-strong S-Hads bond. To prevent the over-strong S-Hads bonds of ReSx in the ReSx /TiO2 , a free-electron reversal transfer strategy is developed to weaken the strong S-Hads bonds via increasing the work function of ReSx by incorporating O to produce ReOSx cocatalyst. Research results attest that a larger work function of ReOSx than that of TiO2 can induce reversal transfer of electrons from TiO2 to ReOSx to produce electron-rich S(2+δ)- , causing the increased antibonding-orbital occupancy of S-Hads in ReOSx /TiO2 . Accordingly, the stability of adsorbed H on S sites is availably decreased, thus weakening the S-Hads of ReOSx . In this case, an electron-rich S(2+δ)- -mediated "capture-hybridization-conversion" mechanism is raised . Benefiting from such property, the resultant ReOSx /TiO2 photocatalyst exhibits a superior H2 -evolution rate of 7168 µmol h-1 g-1 .

Understanding Bridging Sites and Accelerating Quantum Efficiency for Photocatalytic CO2 Reduction

We report a novel double-shelled nanoboxes photocatalyst architecture with tailored interfaces that accelerate quantum efficiency for photocatalytic CO2 reduction reaction (CO2RR) via Mo-S bridging bonds sites in Sv-In2S3@2H-MoTe2. The X-ray absorption near-edge structure shows that the formation of Sv-In2S3@2H-MoTe2 adjusts the coordination environment via interface engineering and forms Mo-S polarized sites at the interface. The interfacial dynamics and catalytic behavior are clearly revealed by ultrafast femtosecond transient absorption, time-resolved, and in situ diffuse reflectance-Infrared Fourier transform spectroscopy. A tunable electronic structure through steric interaction of Mo-S bridging bonds induces a 1.7-fold enhancement in Sv-In2S3@2H-MoTe2(5) photogenerated carrier concentration relative to pristine Sv-In2S3. Benefiting from lower carrier transport activation energy, an internal quantum efficiency of 94.01% at 380 nm was used for photocatalytic CO2RR. This study proposes a new strategy to design photocatalyst through bridging sites to adjust the selectivity of photocatalytic CO2RR.

Enhancing Photocatalytic Hydrogen Evolution by Synergistic Benefits of MXene Cocatalysis and Homo-Interface Engineering

Photocatalytic water splitting holds great promise as a sustainable and cost-effectiveness alternative for the production of hydrogen. Nevertheless, the practical implementation of this strategy is hindered by suboptimal visible light utilization and sluggish charge carrier dynamics, leading to low yield. MXene is a promising cocatalyst due to its high conductivity, abundance of active sites, tunable terminal functional groups, and great specific surface area. Homo-interface has perfect lattice matching and uniform composition, which are more conducive to photogenerated carriers' separation and migration. In this study, a novel ternary heterogeneous photocatalyst, a-TiO2 /H-TiO2 /Ti3 C2 MXene (MXTi), is presented using an electrostatic self-assembly method. Compared to commercial P25, pristine anatase, and rutile TiO2 , as-prepared MXTi exhibit exceptional photocatalytic hydrogen evolution performance, achieving a rate of 0.387 mmol h-1 . The significant improvement is attributable to the synergistic effect of homo-interface engineering and Ti3 C2 MXene, which leads to widened light absorption and efficient carrier transportation. The findings highlight the potential of interface engineering and MXene cocatalyst loading as a proactive approach to enhance the performance of photocatalytic water splitting, paving the way for more sustainable and efficient hydrogen production.

Triggering the Channel-Sulfur Sites in 1T'-ReS2 Cocatalyst toward Splendid Photocatalytic Hydrogen Generation

Electron density manipulation of active sites in cocatalysts is of great essential to realize the optimal hydrogen adsorption/desorption behavior for constructing high-efficient H2 -evolution photocatalyst. Herein, a strategy about weakening metal-metal bond strength to directionally optimize the electron density of channel-sulfur(S) sites in 1T' Re1- x Mox S2 cocatalyst is clarified to improve their hydrogen adsorption strength (S─H bond) for rapid H2 -production reaction. In this case, the ultrathin Re1- x Mox S2 nanosheet is in situ anchored on the TiO2 surface to form Re1- x Mox S2 /TiO2 photocatalyst by a facial molten salt method. Remarkably, numerous visual H2 bubbles are constantly generated on the optimal Re0.92 Mo0.08 S2 /TiO2 sample with a 10.56 mmol g-1  h-1 rate (apparent quantum efficiency is about 50.6%), which is 2.6 times higher than that of traditional ReS2 /TiO2 sample. Density functional theory and in situ/ex situ X-ray photoelectron spectroscopy results collectively demonstrate that the weakened Re─Re bond strength via Mo introduction can induce the formation of unique electron-deficient channel-S sites with suitable electron density, which yield thermoneutral S─H bonds to realize superior interfacial H2 -generation performance. This work provides fundamental guidance on purposely optimizing the electronic state of active sites by manipulating the intrinsic bonding structure, which opens an avenue for designing efficacious photocatalytic materials.

Efficient Photocatalytic Cleavage of Lignin Models by a Soluble Perylene Diimide/Carbon Nitride S-Scheme Heterojunction

3,4,9,10-Perylenetetracarboxylic dianhydride (PDI) is one of the best n-type organic semiconductors and an ideal light-driven catalyst for lignin depolymerization. However, the charge localization effect and the excessively strong intermolecular aggregation trend in PDI result in rapid electron-hole (e- -h+ ) recombination, which limits photocatalytic performance. Herein, polymeric carbon nitride/polyhedral oligomeric silsesquioxane PDI (p-CN/P-PDI) S-scheme heterojunction photocatalyst was prepared by the solvent evaporation-deposition method for C-C bond selective cleavage of lignin β-O-4 model. Based on the material characterization results, the synergic role of polyhedral oligomeric silsesquioxane (POSS) and S-scheme heterojunction maintains appropriate aggregation domains, achieves better solar light utilization, faster charge-transfer efficiency, and greater redox capacity. Notably, the 3 % p-CN/P-PDI heterostructure exhibits a remarkable enhancement in cleavage conversion efficiency, achieving approximately 16.42 and 2.57 times higher conversion rates compared to polyhedral oligomeric silsesquioxane modified PDI (POSS-PDI) and polymeric carbon nitride (p-CN), respectively.

Electron Injection via Interfacial Atomic Au Clusters Substantially Enhance the Visible-Light-Driven Photocatalytic H2 Production of the PF3T Enclosed TiO2 Nanocomposite

A hybrid composite of organic-inorganic semiconductor nanomaterials with atomic Au clusters at the interface decoration (denoted as PF3T@Au-TiO2 ) is developed for visible-light-driven H2 production via direct water splitting. With a strong electron coupling between the terthiophene groups, Au atoms and the oxygen atoms at the heterogeneous interface, significant electron injection from the PF3T to TiO2 occurs leading to a quantum leap in the H2 production yield (18 578 µmol g-1 h-1 ) by ≈39% as compared to that of the composite without Au decoration (PF3T@TiO2 , 11 321 µmol g-1 h-1 ). Compared to the pure PF3T, such a result is 43-fold improved and is the best performance among all the existing hybrid materials in similar configurations. With robust process control via industrially applicable methods, it is anticipated that the findings and proposed methodologies can accelerate the development of high-performance eco-friendly photocatalytic hydrogen production technologies.

Defect Engineered Microcrystalline Cellulose for Enhanced Cocatalyst-Free Piezo-Catalytic H2 Production

Mechanical energy driven piezocatalytic hydrogen (H2 ) production is a promising way to solve the energy crisis . But limited by the slow separation and transfer efficiency of piezoelectric charges generated on the surface of piezocatalysts , the piezocatalytic performance is still not satisfactory. Here, defect engineering is first used to optimize the piezocatalytic performance of microcrystalline cellulose (MCC). The piezocatalytic H2 production rate of MCC with the optimal defect concentration can reach up to 84.47 µmol g-1 h-1 under ultrasonic vibration without any co-catalyst, which is ≈3.74 times higher than that of the pure MCC (22.65 µmol g-1 h-1 ). The enhanced H2 production rate by piezoelectric catalysis is mainly due to the introduction of defect engineering on MCC, which disorders the symmetry of MCC crystal structure, improves the electrical conductivity of the material, and accelerates the separation and transfer efficiency of piezoelectric charges. Moreover, the piezocatalytic H2 production rate of MCC with the optimal defect concentration can still reach up to 93.61 µmol g-1 h-1 in natural seawater, showingits commendable practicability. This study presents a novel view for designing marvelous-performance biomass piezocatalysts through defect engineering, which can efficiently convert mechanical energy into chemical energy .

Single-Atom Engineering of Covalent Organic Framework for Photocatalytic H2 Production Coupled with Benzylamine Oxidation

In photocatalysis, reducing the exciton binding energy and boosting the conversion of excitons into free charge carriers are vital to enhance photocatalytic activity. This work presents a facile strategy of engineering Pt single atoms on a 2D hydrazone-based covalent organic framework (TCOF) to promote H2 production coupled with selective oxidation of benzylamine. The optimised TCOF-Pt SA photocatalyst with 3 wt% Pt single atom exhibited superior performance to TCOF and TCOF-supported Pt nanoparticle catalysts. The production rates of H2 and N-benzylidenebenzylamine over TCOF-Pt SA3 are 12.6 and 10.9 times higher than those over TCOF, respectively. Empirical characterisation and theoretical simulation showed that the atomically dispersed Pt is stabilised on the TCOF support through the coordinated N1 -Pt-C2 sites, thereby induing the local polarization and improving the dielectric constant to reach the low exciton binding energy. These phenomena led to the promotion of exciton dissociation into electrons and holes and the acceleration of the separation and transport of photoexcited charge carriers from bulk to the surface. This work provides new insights into the regulation of exciton effect for the design of advanced polymer photocatalysts.

Electric double layer-mediated polarization field for optimizing photogenerated carrier dynamics and thermodynamics

Photocatalytic hydrogen evolution efficiency is limited due to unfavorable carrier dynamics and thermodynamic performance. Here, we propose to introduce electronegative molecules to build an electric double layer (EDL) to generate a polarization field instead of the traditional built-in electric field to improve carrier dynamics, and optimize the thermodynamics by regulating the chemical coordination of surface atoms. Based on theoretical simulation, we designed CuNi@EDL and applied it as the cocatalyst of semiconductor photocatalysts, finally achieved a hydrogen evolution rate of 249.6 mmol h^-1 g^-1 and remained stable after storing under environmental conditions for more than 300 days. The high H₂ yield is mainly due to the perfect work function, Fermi level and Gibbs free energy of hydrogen adsorption, improved light absorption ability, enhanced electron transfer dynamics, decreased HER overpotential and effective carrier transfer channel arose by EDL. Here, our work opens up new perspectives for the design and optimization of photosystems.

Surface anchoring of nickel sulfide clusters as active sites and cocatalysts for photocatalytic antibiotic degradation and bacterial inactivation

Achieving photocatalytic antibiotic degradation and bacterial inactivation with high efficiency remains a challenging mission to originate a clean environment. In this work, ultra-small NiS clusters were in-situ grew on photoactive ZnIn₂S₄ nanoflower supports to form a NiS/ZnIn₂S₄ heterojunction, in which a strong and surface-limited binding was formed between the NiS clusters and ZnIn₂S₄ supports. The in-situ formed NiS clusters not only appeased interfacial charge transfer resistance of the heterojunction but also eventuated a strong built-in electric field, resulting a fast electron migration from ZnIn₂S₄ to NiS clusters functioned as cocatalyst and active sites to boost the separation efficiency of photogenerated carriers. As a result, the optimal 2NiS/ZnIn₂S₄ heterojunction expressed a higher photocatalytic Escherichia inactivation activity (99.23 % for 3 h) and a raised antibiotic degradation performance, including tetracycline (60 % for 20 min), ofloxacin (62 % for 20 min), oxytetracycline (63 % for 20 min) compared to that of pure ZnIn₂S₄ (39.14 % for Escherichia inactivation and 44 % for tetracycline degradation). This work furnishes a great promise to develop inorganic clusters coupled photocatalysts for light-driven environmental application.

Atomic-Level Regulated 2D ReSe2 : A Universal Platform Boostin Photocatalysis

Solar hydrogen (H₂ ) generation via photocatalytic water splitting is practically promising, environmentally benign, and sustainably carbon neutral. It is important therefore to understand how to controllably engineer photocatalysts at the atomic level. In this work, atomic-level engineering of defected ReSe₂ nanosheets (NSs) is reported to significantly boost photocatalytic H₂ evolution on various semiconductor photocatalysts including TiO₂ , CdS, ZnIn₂ S₄ , and C₃ N₄ . Advanced characterizations, such as atomic-resolution aberration-corrected scanning transmission electron microscopy (AC-STEM), synchrotron-based X-ray absorption near edge structure (XANES), in situ X-ray photoelectron spectroscopy (XPS), transient-state surface photovoltage (SPV) spectroscopy, and transient-state photoluminescence (PL) spectroscopy, together with theoretical computations confirm that the strongly coupled ReSe₂ /TiO₂ interface and substantial atomic-level active sites of defected ReSe₂ NSs result in the significantly raised activity of ReSe₂ /TiO₂ . This work not only for the first time realizes the atomic-level engineering of ReSe₂ NSs as a versatile platform to significantly raise the activities on different photocatalysts, but, more importantly, underscores the immense importance of atomic-level synthesis and exploration on 2D materials for energy conversion and storage.

Effect of Functional Group Modifications on the Photocatalytic Performance of g-C3 N4

In recent years, photocatalysis has received increasing attention in alleviating energy scarcity and environmental treatment, and graphite carbon nitride (g-C₃ N₄ ) is used as an ideal photocatalyst. However, it still remains numerous challenges to obtain the desirable photocatalytic performance of intrinsic g-C₃ N₄ . Functional group functionalization, formed by introducing functional groups into the bulk structure, is one of the common modification techniques to modulate the carrier dynamics and increases the number of active sites, offering new opportunities to break the limits for structure-to-performance relationship of g-C₃ N₄ . Nevertheless, the general overview of the advance of functional group modification of g-C₃ N₄ is less reported yet. In order to better understand the structure-to-performance relationship at the molecular level, a review of the latest development of functional group modification is urgently needed. In this review, the functional group modification of g-C₃ N₄ in terms of structures, properties, and photocatalytic activity is mainly focused, as well as their mechanism of reaction from the molecular level insights is explained. Second, the recent progress of the application of introducing functional groups in g-C₃ N₄ is introduced and examples are given. Finally, the difficulties and challenges are presented, and based on this, an outlook on the future research development direction is shown.

High-yield and crystalline graphitic carbon nitride photocatalyst: One-step sodium acetate-mediated synthesis and improved hydrogen-evolution performance

To avoid the drawbacks (such as multi-step operations and causing big quality loss) of currently reported molten salt-assisted strategy for the preparation of crystalline graphitic carbon nitride (g-C₃N₄) photocatalysts, in this study, an innovative and one-step sodium acetate (CH₃COONa)-mediated synthesis strategy has been designed to synthesize a high-yield and crystalline g-C₃N₄ photocatalyst. It is found that CH₃COONa can strongly combine with dicyandiamide (DCDA) to availably prevent the massive sublimation of DCDA and the following intermediates, causing the high-efficiency transformation of DCDA into g-C₃N₄ with a high yield (52.2 wt%). In addition to the promoted denitrification and quick polymerization of DCDA via CH₃COONa, the produced Na₂CO₃ from CH₃COONa decomposition at a higher temperature can further accelerate the polymerization reaction of 3-s-triazine units, leading to the final production of highly ordered and crystalline g-C₃N₄. Consequently, the resultant high-yield and crystalline g-C₃N₄ shows an obviously strengthened hydrogen (H₂)-evolution rate, about 2.4 times higher than that of bulk g-C₃N₄, which is due to the synergetic function of highly crystalline structure, reduced band gap and cyano-groups. The current one-step CH₃COONa-mediated synthesis strategy may open a novel horizon for the facile preparations and various applications of crystalline g-C₃N₄ materials.

Metallic Metastable Hybrid 1T'/1T Phase Triggered Co,PSnS2 Nanosheets for High Efficiency Trifunctional Electrocatalyst

The development of trifunctional electrocatalyst for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) with deeply understanding the mechanism to enhance the electrochemical performance is still a challenging task. In this work, the distorted metastable hybrid-phase induced 1T'/1T Co,PSnS₂ nanosheets on carbon cloth (1T'/1T Co,PSnS₂ @CC) is prepared and examined. The density functional theoretical (DFT) calculation suggests that the distorted 1T'/1T Co,PSnS₂ can provide excellent conductivity and strong hydrogen adsorption ability. The electronic structure tuning and enhancement mechanism of electrochemical performance are investigated and discussed. The optimal 1T'/1T Co,PSnS₂ @CC catalyst exhibits low overpotential of ≈94 and 219.7 mV at 10 mA cm^-2 for HER and OER, respectively. Remarkably, the catalyst exhibits exceptional ORR activity with small onset potential value (≈0.94 V) and half-wave potential (≈0.87 V). Most significantly, the 1T'/1T Co,PSnS₂ ||Co,PSnS₂ electrolyzer required small cell voltages of ≈1.53, 1.70, and 1.82 V at 10, 100, and 400 mA cm^-2 , respectively, which are better than those of state-of-the-art Pt-C||RuO₂ (≈1.56 and 1.84 V at 10 and 100 mA cm^-2 ). The present study suggests a new approach for the preparation of large-scalable, high performance hierarchical 3D next-generation trifunctional electrocatalysts.

Covalent Organic Framework/g-C3N4 van der Waals Heterojunction toward H2 Production

Photocatalytic water splitting into H₂ is the most economic and environmentally friendly strategy for H₂ production, and rationally constructing a heterojunction retains enormous influence on a photocatalytic system. Herein, 2D/2D covalent organic framework/graphitic carbon nitride (COF/CN) van der Waals heterojunctions were readily prepared via an ultrasonic method for high-efficiency visible-light photocatalytic H₂ production. The photocatalytic H₂ production performance of optimized COF/CN composites can reach up to 449.64 μmol·h^-1, which is approximately 5 times that of pure CN (89.08 μmol·h^-1). The characterization and experimental studies reveal that the synergistic effect between COF and CN contributes to promoting the interfacial migration and spatial separation of photoinduced e^--h⁺ pairs, further boosting the photocatalytic hydrogen production activity. This work may open a new window to design and fabricate effective heterojunction photocatalysts for photocatalytic energy conversion.

Verifying the Charge-Transfer Mechanism in S-Scheme Heterojunctions Using Femtosecond Transient Absorption Spectroscopy

The S-scheme heterojunction is flourishing in photocatalysis because it concurrently realizes separated charge carriers and sufficient redox ability. Steady-state charge transfer has been confirmed by other methods. However, an essential part, the transfer dynamics in S-scheme heterojunctions, is still missing. To compensate, a series of cadmium sulfide/pyrene-alt-difluorinated benzothiadiazole heterojunctions were constructed and the photophysical processes were investigated with femtosecond transient absorption spectroscopy. Encouragingly, an interfacial charge-transfer signal was detected in the spectra of the heterojunction, which provides solid evidence for S-scheme charge transfer to complement the results from well-established methods. Furthermore, the lifetime for interfacial charge transfer was calculated to be ca. 78.6 ps. Moreover, the S-scheme heterojunction photocatalysts exhibit higher photocatalytic conversion of 1,2-diols and H₂ production rates than bare cadmium sulfide.

Exploiting the LSPR effect for an enhanced photocatalytic hydrogen evolution reaction

Incorporation of plasmonic metals is one of the most widely adopted strategies for improving the photocatalytic hydrogen evolution reaction (HER) activity of semiconductor photocatalysts. This article summarizes recent advances in the development of plasmonic metal-semiconductor photocatalysts and four localized surface plasmon resonance (LSPR) driven mechanisms by which plasmonic metal nanoparticles can contribute to enhancement of HER activity. In addition, principles for maximizing the contribution of these LSPR driven mechanisms are highlighted to provide insights for future design of plasmonic metal-semiconductor photocatalysts with enhanced HER activity.

Femtosecond transient absorption spectroscopy investigation into the electron transfer mechanism in photocatalysis

Femtosecond transient absorption spectroscopy (fs-TAS) is a powerful technique for monitoring the electron transfer kinetics in photocatalysis. Several important works have successfully elucidated the electron transfer mechanism in heterojunction photocatalysts (HPs) using fs-TAS measurements, and thus a timely summary of recent advances is essential. This feature article starts with a thorough interpretation of the operating principle of fs-TAS equipment, and the fundamentals of the fs-TAS spectra. Subsequently, the applications of fs-TAS in analyzing the dynamics of photogenerated carriers in semiconductor/metal HPs, semiconductor/carbon HPs, semiconductor/semiconductor HPs, and multicomponent HPs are discussed in sequence. Finally, the significance of fs-TAS in revealing the ultrafast interfacial electron transfer process in HPs is summarized, and further research on the applications of fs-TAS in photocatalysis is proposed. This feature article will provide deep insight into the mechanism of the enhanced photocatalytic performance of HPs from the perspective of electron transfer kinetics.

Functionalized MOF-Based Photocatalysts for CO2 Reduction

Metal-organic frameworks (MOFs) materials have become a research forefront in the field of photocatalytic CO₂ reduction attributed to their ultra-high specific surface area, adjustable structure, and abundant catalytic active sites. Particularly, MOFs can be facilely tuned to match CO₂ photoreduction by utilizing post-modification of metal nodes, functionalization of organic linkers, and combination with other active materials. Herein, the recent advances in the construction strategy of MOF-based photocatalysts materials for CO₂ reduction are highlighted. Some systematic modification strategies on MOF-based photocatalysts are also discussed, such as modification of metal sites and organic ligands, construction of heterojunction, introduction of single/dual-atom, and strain engineering. Finally, the future development directions of MOF-based photocatalysts in the field of CO₂ reduction are presented.

Electrocatalytic activity of metal encapsulated, doped, and engineered fullerene-based nanostructured materials towards hydrogen evolution reaction

The utilization of nanostructured materials as efficient catalyst for several processes has increased tremendously, and carbon-based nanostructured materials encompassing fullerene and its derivatives have been observed to possess enhanced catalytic activity when engineered with doping or decorated with metals, thus making them one of the most promising nanocage catalyst for hydrogen evolution reaction (HER) during electro-catalysis. Prompted by these, and the reported electrochemical, electronic and stability advantage, an attempt is put forward herein to inspect the metal encapsulated, doped, and decorated dependent HER activity of C₂₄ engineered nanostructured materials as effective electro-catalyst for HER. Density functional theory (DFT) calculations have been utilized to evaluate the catalytic hydrogen evolution reaction activity of four proposed bare systems: fullerene (C₂₄), calcium encapsulated fullerene (Ca^encC₂₄), nickel-doped calcium encapsulated fullerene (Ni^dopCa^encC₂₄), and silver decorated nickel-doped calcium encapsulated (Ag^decNi^dopCa^encC₂₄) engineered nanostructured materials at the TPSSh/GenECP/6-311+G(d,p)/LanL2DZ level of theory. The obtained results divulged that, a potential decrease in energy gap (E_gap) occurred in the bare systems, while a sparing increase was observed upon adsorption of hydrogen onto the surfaces, these surfaces where also observed to maintain the least E_H–L gap while the Ag^decNi^dopCa^encC₂₄ surface exhibited an increased electrocatalytic activity when compared to others. The results also showed that the electronic properties of the systems evinced a correspondent result with their electrochemical properties, the Ag-decorated surface also exhibited a proficient adsorption energy \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$({E}_{ads}^{H})$$\end{document}(EadsH) and Gibb’s free energy (ΔG_H) value. The engineered Ag-decorated and Ni-doped systems were found to possess both good surface stability and excellent electro-catalytic property for HER activities.

Insights into the role of reactive oxygen species in photocatalytic H2O2 generation and OTC removal over a novel BN/Zn3In2S6 heterojunction

Developing photocatalysts with superior performance to generate hydrogen peroxide (H₂O₂) and degrade oxytetracycline (OTC) is an effective strategy for the treatment of energy crisis and water purification. Herein, BN nanosheets were anchored onto the Zn₃In₂S₆ microspheres for the research. Experimental and density functional theory (DFT) results demonstrate that due to different work functions and unique 2D/2D contact, the electron is spatially separated in BN/Zn₃In₂S₆ nanocomposite, which increases the electron transfer efficiency from 43.7% (Zn₃In₂S₆) to 55.6% (BN/ZIS-4). As a result, BN/ZIS-4 with optimal ratio of BN and Zn₃In₂S₆ exhibits the highest OTC degradation efficiency (84.5%) and H₂O₂ generation rate (115.5 μmol L^-1) under visible light illumination, which is 2.2 and 2.9 times than that of pristine Zn₃In₂S₆. H₂O₂ generation is dominated by two pathways: two-step single-electron process (O₂ → ∙O₂^- → H₂O₂) and another way (O₂ → ∙O₂^- → ¹O₂ → H₂O₂). In the process of degrading OTC, ∙O₂^-, ¹O₂ and ∙OH are regarded as the main active species. This work offers a new insight for designing efficient, stable and reusable photocatalysts to solve current environmental conundrums.

PtS quantum dots/Nb2O5 nanosheets with accelerated charge transfer for boosting photocatalytic H2 production

The rapid recombination rate of charges limits the improvement of photocatalytic hydrogen evolution performance related to semiconductor photocatalysts. An effective strategy to accelerate charge separation and transfer is the design and construction of new high-efficiency cocatalysts on photocatalysts. Herein, a system of PtS quantum dots/Nb₂O₅ nanosheets (PtS/Nb₂O₅) was constructed via the in situ vapor phase (ISVP) synthesis process. The conclusions from ultrafast femtosecond-resolved TA spectroscopy indicated that the lifetime of the photogenerated charges of PtS/Nb₂O₅ (6073.75 ps) was shortened markedly in contrast to that of Nb₂O₅ (6634.05 ps), manifesting the facilitated separation and transfer of photogenerated charges caused by the quantum-dot-structured PtS cocatalyst. The enhanced charge separation and transfer capacity contributes to an excellent H₂ production rate of 182.5 μmol h^-1 for PtS/Nb₂O₅, which is up to 3.4 and 12.2 times that of Pt/Nb₂O₅ and Nb₂O₅, respectively. This work brings up new avenues for constructing unique and effective photocatalysts via the cocatalyst design.

Recent advances in solution assisted synthesis of transition metal chalcogenides for photo-electrocatalytic hydrogen evolution

Hydrogen evolution from water splitting is considered to be an important renewable clean energy source and alternative to fossil fuels for future energy sustainability. Photocatalytic and electrocatalytic water splitting is considered to be an effective method for the sustainable production of clean energy, H₂. This perspective especially emphasizes research advances in the solution-assisted synthesis of transition metal chalcogenides for both photo and electrocatalytic hydrogen evolution applications. Transition metal chalcogenides (CdS, MoS₂, WS₂, TiS₂, TaS₂, ReS₂, MoSe₂, and WSe₂) have received intensified research interest over the past two decades on account of their unique properties and great potential across a wide range of applications. The photocatalytic activity of transition metal chalcogenides can further be improved by elemental doping, heterojunction formation with noble metals (Au, Pt, etc.), non-chalcogenides (MoS₂, In₂S₃, NiS_1-X), morphological tuning, through various solution-assisted synthesis processes, including liquid-phase exfoliation, heat-up, hot-injection methods, hydrothermal/solvothermal routes and template-mediated synthesis processes. In this review we will discuss recent developments in transition metal chalcogenides (TMCs), the role of TMCs for hydrogen production and various strategies for surface functionalization to increase their activity, different synthesis methods, and prospects of TMCs for hydrogen evolution. We have included a brief discussion on the effect of surface hydrogen binding energy and Gibbs free energy change for HER in electrocatalytic hydrogen evolution.

Junction of ZnmIn2S3+m and bismuth vanadate as Z-scheme photocatalyst for enhanced hydrogen evolution activity: The role of interfacial interactions

A series of Zn_mIn₂S_3+m photocatalysts were synthesized to show tunable band gap energy with the variation of Zn/S atomic ratio. The junction of Zn_mIn₂S_3+m and BiVO₄ led to intimate interfacial contacts. Both experimental and theoretical results implied that electrons flowed from Zn_mIn₂S_3+m to BiVO₄ at the Zn_mIn₂S_3+m/BiVO₄ interface to form built-in electric field due to the variation of Fermi level, which promised Z scheme charge transfer feature for improving separation of charge carriers for enhanced photocatalytic performance. A higher degree of charge transfer process occurred for Zn₂In₂S₅/BiVO₄ heterostructure promised stronger built-in electric field, higher charge separation efficiency and improved photocatalytic activity in comparison to ZnIn₂S₄/BiVO₄ and Zn₃In₂S₆/BiVO₄ heterojunctions. The optimal hydrogen production rate of Zn₂In₂S₅/BiVO₄ photocatalyst is 8.42 mmol•g^-1•h^-1 with apparent quantum yield of 22.32 % at 435 nm, which is about 2.2 and 1.5 times higher than that of ZnIn₂S₄/BiVO₄ and Zn₃In₂S₆/BiVO₄, respectively.