Stretchable, Breathable, and Stable Lead-Free Perovskite/Polymer Nanofiber Composite for Hybrid Triboelectric and Piezoelectric Energy Harvesting

Ingenious Structure Engineering to Enhance Piezoelectricity in Poly(vinylidene fluoride) for Biomedical Applications

The future development of wearable/implantable sensing and medical devices relies on substrates with excellent flexibility, stability, biocompatibility, and self-powered capabilities. Enhancing the energy efficiency and convenience is crucial, and converting external mechanical energy into electrical energy is a promising strategy for long-term advancement. Poly(vinylidene fluoride) (PVDF), known for its piezoelectricity, is an outstanding representative of an electroactive polymer. Ingeniously designed PVDF-based polymers have been fabricated as piezoelectric devices for various applications. Notably, the piezoelectric performance of PVDF-based platforms is determined by their structural characteristics at different scales. This Review highlights how researchers can strategically engineer structures on microscopic, mesoscopic, and macroscopic scales. We discuss advanced research on PVDF-based piezoelectric platforms with diverse structural designs in biomedical sensing, disease diagnosis, and treatment. Ultimately, we try to give perspectives for future development trends of PVDF-based piezoelectric platforms in biomedicine, providing valuable insights for further research.

Flexible Multimodal Sensors Enhanced by Electrospun Lead-Free Perovskite and PVDF-HFP Composite Form-Stable Mesh Membranes for In Situ Plant Monitoring

The pH and humidity of the crop environment are essential indicators for monitoring crop growth status. This study reports a lead-free perovskite/polyvinylidene fluoride-hexafluoropropylene composite (LPPC) to enhance the stability and reliability of in situ plant pH and humidity monitoring. The mesh composite membrane of LPPC illustrates a hydrophobic contact angle of 101.982°, a tensile strain of 800%, and an opposing surface potential of less than -184.9 mV, which ensures fast response, high sensitivity, and stability of the sensor during long-term plant monitoring. The LPPC-coated pH electrode possesses a sensitivity of -63.90 mV/pH, which provides a fast response within 5 s and is inert to environmental temperature interference. The LPPC-coated humidity sensor obtains a sensitivity of -145.7 Ω/% RH, responds in 28 s, and works well under varying light conditions. The flexible multimodal sensor coated with an LPPC membrane completed real-time in situ monitoring of soilless strawberries for 17 consecutive days. Satisfactory consistency and accuracy performance are observed. The study provides a simple solution for developing reliable, flexible wearable multiparameter sensors for in situ monitoring of multiple parameters of crop environments.

Dual-Responsive MXene-Functionalized Wool Yarn Artificial Muscles

Fiber-based artificial muscles are promising for smart textiles capable of sensing, interacting, and adapting to environmental stimuli. However, the application of current artificial muscle-based textiles in wearable and engineering fields has largely remained a constraint due to the limited deformation, restrictive stimulation, and uncomfortable. Here, dual-responsive yarn muscles with high contractile actuation force are fabricated by incorporating a very small fraction (<1 wt.%) of Ti3C2Tx MXene/cellulose nanofibers (CNF) composites into self-plied and twisted wool yarns. They can lift and lower a load exceeding 3400 times their own weight when stimulated by moisture and photothermal. Furthermore, the yarn muscles are coiled homochirally or heterochirally to produce spring-like muscles, which generated over 550% elongation or 83% contraction under the photothermal stimulation. The actuation mechanism, involving photothermal/moisture-mechanical energy conversion, is clarified by a combination of experiments and finite element simulations. Specifically, MXene/CNF composites serve as both photothermal and hygroscopic agents to accelerate water evaporation under near-infrared (NIR) light and moisture absorption from ambient air. Due to their low-cost facile fabrication, large scalable dimensions, and robust strength coupled with dual responsiveness, these soft actuators are attractive for intelligent textiles and devices such as self-adaptive textiles, soft robotics, and wearable information encryption.

Multi-Objective Bayesian Optimization for Laminate-Inspired Mechanically Reinforced Piezoelectric Self-Powered Sensing Yarns

Piezoelectric fiber yarns produced by electrospinning offer a versatile platform for intelligent devices, demonstrating mechanical durability and the ability to convert mechanical strain into electric signals. While conventional methods involve twisting a single poly(vinylidene fluoride-co-trifluoroethylene)(P(VDF-TrFE)) fiber mat to create yarns, by limiting control over the mechanical properties, an approach inspired by composite laminate design principles is proposed for strengthening. By stacking multiple electrospun mats in various sequences and twisting them into yarns, the mechanical properties of P(VDF-TrFE) yarn structures are efficiently optimized. By leveraging a multi-objective Bayesian optimization-based machine learning algorithm without imposing specific stacking restrictions, an optimal stacking sequence is determined that simultaneously enhances the ultimate tensile strength (UTS) and failure strain by considering the orientation angles of each aligned fiber mat as discrete design variables. The conditions on the Pareto front that achieve a balanced improvement in both the UTS and failure strain are identified. Additionally, applying corona poling induces extra dipole polarization in the yarn state, successfully fabricating mechanically robust and high-performance piezoelectric P(VDF-TrFE) yarns. Ultimately, the mechanically strengthened piezoelectric yarns demonstrate superior capabilities in self-powered sensing applications, particularly in challenging environments and sports scenarios, substantiating their potential for real-time signal detection.

Emerging Trends of Nanofibrous Piezoelectric and Triboelectric Applications: Mechanisms, Electroactive Materials, and Designed Architectures

Over the past few decades, significant progress in piezo-/triboelectric nanogenerators (PTEGs) has led to the development of cutting-edge wearable technologies. Nanofibers with good designability, controllable morphologies, large specific areas, and unique physicochemical properties provide a promising platform for PTEGs for various advanced applications. However, the further development of nanofiber-based PTEGs is limited by technical difficulties, ranging from materials design to device integration. Herein, the current developments in PTEGs based on electrospun nanofibers are systematically reviewed. This review begins with the mechanisms of PTEGs and the advantages of nanofibers and nanodevices, including high breathability, waterproofness, scalability, and thermal-moisture comfort. In terms of materials and structural design, novel electroactive nanofibers and structure assemblies based on 1D micro/nanostructures, 2D bionic structures, and 3D multilayered structures are discussed. Subsequently, nanofibrous PTEGs in applications such as energy harvesters, personalized medicine, personal protective equipment, and human-machine interactions are summarized. Nanofiber-based PTEGs still face many challenges such as energy efficiency, material durability, device stability, and device integration. Finally, the research gap between research and practical applications of PTEGs is discussed, and emerging trends are proposed, providing some ideas for the development of intelligent wearables.

Electrostatic Smart Textiles for Braille-To-Speech Translation

A wearable Braille-to-speech translation system is of great importance for providing auditory feedback in assisting blind people and people with speech impairment. However, previous reported Braille-to-speech translation systems still need to be improved in terms of comfortability or integration. Here, a Braille-to-speech translation system that uses dual-functional electrostatic transducers which are made of fabric-based materials and can be integrated into textiles is reported. Based on electrostatic induction, the electrostatic transducer can either serve as a tactile sensor or a loudspeaker with the same design. The proposed electrostatic transducers have excellent output performances, mechanical robustness, and working stability. By combining the devices with machine learning algorithms, it is possible to translate the Braille alphabet and 40 commonly used words (extensible) into speech with an accuracy of 99.09% and 97.08%, respectively. This work demonstrates a new approach for further developments of advanced assistive technology toward improving the lives of disabled people.

Self-Charging Power System Empowered by Bismuth Halide Perovskite-Based Hybrid Nanogenerator and Lithium-ion Battery

Halide perovskite, renowned for its multifunctional properties, shows considerable promise for realizing self-charging power systems. In this study, a lead-free methylammonium bismuth iodide (MA3Bi2I9) perovskite is used to create a self-charging power unit (SPU). This involves constructing a hybrid piezoelectric-triboelectric nanogenerator (Hybrid-TENG) and utilizing MA3Bi2I9 for energy storage as an anode in a lithium-ion battery (LIB). Initially, MA3Bi2I9 nanorods are synthesized and composited with a polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene polymer. The dielectric and mechanical properties of composite films having perovskite loading content are investigated. The optimized Hybrid-TENG exhibits superior performance, generating a voltage of 537 V, current density of 13.2 µA cm- 2, and maximum power density of 3.04 mW cm-2, which can be attributed to the high piezoelectric coefficient of MA3Bi2I9 nanorods (≈20.6 pm V-1). A MA3Bi2I9 thin film, serving as an electrode in LIB, demonstrates a high specific capacity of 2378.9 mAh cm-3 (578.8 mAh g-1) with a capacity retention of ≈87.5% over 100 cycles, underscoring its stable performance. Furthermore, a Hybrid-TENG is employed to charge the MA3Bi2I9-based LIB, thus realizing an SPU for driving portable electronics. This study highlights the promising potential of perovskites for developing efficient nanogenerators and LIBs, paving the way for sustainable energy solutions in small-scale electronics.

Perovskite Nanocrystals Induced Core-Shell Inorganic-Organic Nanofibers for Efficient Energy Harvesting and Self-Powered Monitoring

The emerging field of wearable electronics requires power sources that are flexible, lightweight, high-capacity, durable, and comfortable for daily use, which enables extensive use in electronic skins, self-powered sensing, and physiological health monitoring. In this work, we developed the core-shell and biocompatible Cs2InCl5(H2O)@PVDF-HFP nanofibers (CIC@HFP NFs) by one-step electrospinning assisted self-assembly method for triboelectric nanogenerators (TENGs). By adopting lead-free Cs2InCl5(H2O) as an inducer, CIC@HFP NFs exhibited β-phase-enhanced and self-aligned nanocrystals within the uniaxial direction. The interface interaction was further investigated by experimental measurements and molecular dynamics, which revealed that the hydrogen bonds between Cs2InCl5(H2O) and PVDF-HFP induced automatically well-aligned dipoles and stabilized the β-phase in the CIC@HFP NFs. The TENG fabricated using CIC@HFP NFs and nylon-6,6 NFs exhibited significant improvement in output voltage (681 V), output current (53.1 μA) and peak power density (6.94 W m-2), with the highest reported output performance among TENGs based on halide-perovskites. The energy harvesting and self-powered monitoring performance were further substantiated by human motions, showcasing its ability to charge capacitors and effectively operate electronics such as commercial LEDs, stopwatches, and calculators, demonstrating its promising application in biomechanical energy harvesting and self-powered sensing.

A Temperature Prediction Model for Flexible Electronic Devices Based on GA-BP Neural Network and Experimental Verification

The problem that the thermal safety of flexible electronic devices is difficult to evaluate in real time is addressed in this study by establishing a BP neural network (GA-BPNN) temperature prediction model based on genetic algorithm optimisation. The model uses a BP neural network to fit the functional relationship between the input condition and the steady-state temperature of the equipment and uses a genetic algorithm to optimise the parameter initialisation problem of the BP neural network. To overcome the challenge of the high cost of obtaining experimental data, finite element analysis software is used to simulate the temperature results of the equipment under different working conditions. The prediction variance of the GA-BPNN model does not exceed 0.57 °C and has good robustness, as the model is trained according to the simulation data. The study conducted thermal validation experiments on the temperature prediction model for this flexible electronic device. The device reached steady state after 1200 s of operation at rated power. The error between the predicted and experimental results was less than 0.9 °C, verifying the validity of the model's predictions. Compared with traditional thermal simulation and experimental methods, this model can quickly predict the temperature with a certain accuracy and has outstanding advantages in computational efficiency and integrated application of hardware and software.

Advanced Dielectric Materials for Triboelectric Nanogenerators: Principles, Methods, and Applications

Triboelectric nanogenerator (TENG) manifests distinct advantages such as multiple structural selectivity, diverse selection of materials, environmental adaptability, low cost, and remarkable conversion efficiency, which becomes a promising technology for micro-nano energy harvesting and self-powered sensing. Tribo-dielectric materials are the fundamental and core components for high-performance TENGs. In particular, the charge generation, dissipation, storage, migration of the dielectrics, and dynamic equilibrium behaviors determine the overall performance. Herein, a comprehensive summary is presented to elucidate the dielectric charge transport mechanism and tribo-dielectric material modification principle toward high-performance TENGs. The contact electrification and charge transport mechanism of dielectric materials is started first, followed by introducing the basic principle and dielectric materials of TENGs. Subsequently, modification mechanisms and strategies for high-performance tribo-dielectric materials are highlighted regarding physical/chemical, surface/bulk, dielectric coupling, and structure optimization. Furthermore, representative applications of dielectric materials based TENGs as power sources, self-powered sensors are demonstrated. The existing challenges and promising potential opportunities for advanced tribo-dielectric materials are outlined, guiding the design, fabrication, and applications of tribo-dielectric materials.

A Review of Recent Advances in Human-Motion Energy Harvesting Nanogenerators, Self-Powering Smart Sensors and Self-Charging Electronics

In recent years, portable and wearable personal electronic devices have rapidly developed with increasing mass production and rising energy consumption, creating an energy crisis. Using batteries and supercapacitors with limited lifespans and environmental hazards drives the need to find new, environmentally friendly, and renewable sources. One idea is to harness the energy of human motion and convert it into electrical energy using energy harvesting devices-piezoelectric nanogenerators (PENGs), triboelectric nanogenerators (TENGs) and hybrids. They are characterized by a wide variety of features, such as lightness, flexibility, low cost, richness of materials, and many more. These devices offer the opportunity to use new technologies such as IoT, AI or HMI and create smart self-powered sensors, actuators, and self-powered implantable/wearable devices. This review focuses on recent examples of PENGs, TENGs and hybrid devices for wearable and implantable self-powered systems. The basic mechanisms of operation, micro/nano-scale material selection and manufacturing processes of selected examples are discussed. Current challenges and the outlook for the future of the nanogenerators are also discussed.

Improved Energy Harvesting Ability of Single-Layer Binary Fiber Nanocomposite Membrane for Multifunctional Wearable Hybrid Piezoelectric and Triboelectric Nanogenerator and Self-Powered Sensors

While wearable self-powered electronic devices have shown promising improvements, substantial challenges persist in enhancing their electrical output and structural performance. In this work, a working mechanism involving simultaneous piezoelectric and triboelectric conversion within a monolayer-structured membrane is proposed. Single-layer binary fiber nanocomposite membranes (SBFNMs) (PVDF/CNTX@PAN/CNTX, DPCPCX) with two distinct interpenetrating nanocomposite fibers were created through co-electrospinning, incorporating multiwalled carbon nanotubes (CNTs) into polyvinylidene fluoride (PVDF) and polyacrylonitrile (PAN), respectively. The resulting membrane demonstrated an exceptional synergistic effect of piezoelectricity and triboelectricity along with a high machine-to-electric conversion capability. The addition of CNTs increased the PVDF β-phase and the PAN planar zigzag conformation. As a result, the DPCPC0.5-SBFNMs-based piezoelectric nanogenerator exhibited excellent electrical output (187 V, 8.0 μA, and 1.52 W m-2), maintaining an exceptionally high level of output voltage compared with other piezoelectric nanogenerators. It successfully illuminated 50 commercial light-emitting diodes simultaneously. The output voltage of DPCPC0.5-SBFNMs was 5.1 and 4.6 times higher than that of PAN or PVDF single-fiber membranes, respectively. Furthermore, the peak voltage of DPCPC0.5-SBFNMs exceeded that of co-electrospinning PVDF/CNT1.0@PAN (DPCP1.0) and PVDF@PAN/CNT1.0 (DPPC1.0) by 20 and 10 V, respectively. The piezoelectric sensor made of DPCPC0.5-SBFNMs accurately sensed human movement, ranging from tiny to large, and demonstrated utility as an alarm in medical treatment, fire fighting, and monitoring. Endogenous triboelectricity is proposed in SBFNM piezoelectric materials, enhancing electromechanical conversion and electrical output capacity, thereby promising a wide application potential in self-powered wearable electronic devices.

High-Performance Liquid-Repellent and Thermal-Wet Comfortable Membranes Using Triboelectric Nanostructured Nanofiber/Meshes

Skin-like functional membranes with liquid resistance and moisture permeability are in growing demand in various applications. However, the membranes have been facing a long-term dilemma in balancing waterproofness and breathability, as well as resisting internal liquid sweat transport, resulting in poor thermal-wet comfort. Herein, a novel electromeshing technique, based on manipulating the ejection and phase separation of charged liquids, is developed to create triboelectric nanostructured nano-mesh consisting of hydrophobic ferroelectric nanofiber/meshes and hydrophilic nanofiber/meshes. By combining the true nanoscale diameter (≈22 nm), small pore size, and high porosity, high waterproofness (129 kPa) and breathability (3736 g m-2 per day) for the membranes are achieved. Moreover, the membranes can break large water clusters into small water molecules to promote sweat absorption and release by coupling hydrophilic wicking and triboelectric field polarization, exhibiting a satisfactory water evaporation rate (0.64 g h-1 ) and thermal-wet comfort (0.7 °C cooler than the cutting-edge poly(tetrafluoroethylene) protective membranes). This work may shed new light on the design and development of advanced protective textiles.

Optimization of Electron Transport Pathway: A Novel Strategy to Solve the Photocorrosion of Ag-Based Photocatalysts

Although Ag-containing photocatalysts exhibit excellent photocatalytic ability, they present great challenges owing to their photocorrosion and ease of reduction. Herein, an electron acceptor platform of Ag2O/La(OH)3/polyacrylonitrile (PAN) fiber was constructed using a heterojunction strategy and electrospinning technology to develop a novel photocatalytic membrane with a redesigned electron transport pathway. Computational and experimental results demonstrate that the optimized electron transport pathway included intercrystal electron transfer induced by the La-O bond between Ag2O and La(OH)3 as well as electron transfer between the catalyst crystal and electrophilic PAN membrane interface. In addition, the photocatalytic performance of the Ag2O/La(OH)3 membrane for tetracycline (TC) removal was still above 97% after five photocatalytic reaction cycles. Furthermore, the carrier life was greatly extended. Mechanistic study revealed that photogenerated holes on the Ag2O/La(OH)3 membrane were the main reactive species in TC degradation. Overall, this study proposes a novel electron transport pathway strategy that effectively solves the problems of photocatalyst photocorrosion and structural instability.

Phononic band gap in random spring networks

We investigate the relation between topological and vibrational properties of networked materials by analyzing, both numerically and analytically, the properties of a random spring network model. We establish a pseudodispersion relation, which allows us to predict the existence of distinct transitions from extended to localized vibrational modes in this class of materials. Consequently, we propose an alternative method to control phonon and elastic wave propagation in disordered networks. In particular, the phonon band gap of our spring network model can be enhanced by either increasing its average degree or decreasing its assortativity coefficient. Applications to phonon band engineering and vibrational energy harvesting are briefly discussed.

From Triboelectric Nanogenerator to Hybrid Energy Harvesters: A Review on the Integration Strategy toward High Efficiency and Multifunctionality

The rapid development of smart devices and electronic products puts forward higher requirements for power supply components. As a promising solution, hybrid energy harvesters that are based on a triboelectric nanogenerator (HEHTNG) show advantages of both high energy harvesting efficiency and multifunctionality. Aiming to systematically elaborate the latest research progress of a HEHTNG, this review starts by introducing its working principle with a focus on the combination of triboelectric nanogenerators with various other energy harvesters, such as piezoelectric nanogenerators, thermoelectric/pyroelectric nanogenerators, solar cells, and electromagnetic nanogenerators. While the performance improvement and integration strategies of HEHTNG toward environmental energy harvesting are emphasized, the latest applications of HEHTNGs as multifunctional sensors in human health detection are also illustrated. Finally, we discuss the main challenges and prospects of HEHTNGs, hoping that this work can provide a clear direction for the future development of intelligent energy harvesting systems for the Internet of Things.

Biodegradable Piezoelectric Polymers: Recent Advancements in Materials and Applications

Recent materials, microfabrication, and biotechnology improvements have introduced numerous exciting bioelectronic devices based on piezoelectric materials. There is an intriguing evolution from conventional unrecyclable materials to biodegradable, green, and biocompatible functional materials. As a fundamental electromechanical coupling material in numerous applications, novel piezoelectric materials with a feature of degradability and desired electrical and mechanical properties are being developed for future wearable and implantable bioelectronics. These bioelectronics can be easily integrated with biological systems for applications, including sensing physiological signals, diagnosing medical problems, opening the blood-brain barrier, and stimulating healing or tissue growth. Therefore, the generation of piezoelectricity from natural and synthetic bioresorbable polymers has drawn great attention in the research field. Herein, the significant and recent advancements in biodegradable piezoelectric materials, including natural and synthetic polymers, their principles, advanced applications, and challenges for medical uses, are reviewed thoroughly. The degradation methods of these piezoelectric materials through in vitro and in vivo studies are also investigated. These improvements in biodegradable piezoelectric materials and microsystems could enable new applications in the biomedical field. In the end, potential research opportunities regarding the practical applications are pointed out that might be significant for new materials research.

Simulation Guided Coaxial Electrospinning of Polyvinylidene Fluoride Hollow Fibers with Tailored Piezoelectric Performance

Electrospun polyvinylidene fluoride (PVDF) piezoelectric fibers have high potential applicability in mechanical energy harvesting and self-powered sensing owing to their high electromechanical coupling capabilities. Strategies for tailoring fiber morphology have been the primary focus for realizing enhanced piezoelectric output. However, the relationship between piezoelectric performance and fiber structure remains unclear. This study fabricates PVDF hollow fibers through coaxial electrospinning, whose wall thickness can be tuned by changing the internal solution concentration. Simulation analysis demonstrates an increased effective deformation of the hollow fiber as enlarging inner diameter, resulting in enhanced piezoelectric output, which is in excellent agreement with the experimental results. This study is the first to unravel the influence mechanism of morphology regulation of a PVDF hollow fiber on its piezoelectric performance from both simulation and experimental aspects. The optimal PVDF hollow fiber piezoelectric energy harvester (PEH) delivers a piezoelectric output voltage of 32.6 V, ≈3 times that of the solid PVDF fiber PEH. Furthermore, the electrical output of hollow fiber PEH can be stably stored in secondary energy storage systems to power microelectronics. This study highlights an efficient approach for reconciling the simulation and tailoring the fiber PEH morphology for enhanced performances for future self-powered systems.

Achieving tissue-level softness on stretchable electronics through a generalizable soft interlayer design

Soft and stretchable electronics have emerged as highly promising tools for biomedical diagnosis and biological studies, as they interface intimately with the human body and other biological systems. Most stretchable electronic materials and devices, however, still have Young's moduli orders of magnitude higher than soft bio-tissues, which limit their conformability and long-term biocompatibility. Here, we present a design strategy of soft interlayer for allowing the use of existing stretchable materials of relatively high moduli to versatilely realize stretchable devices with ultralow tissue-level moduli. We have demonstrated stretchable transistor arrays and active-matrix circuits with moduli below 10 kPa-over two orders of magnitude lower than the current state of the art. Benefiting from the increased conformability to irregular and dynamic surfaces, the ultrasoft device created with the soft interlayer design realizes electrophysiological recording on an isolated heart with high adaptability, spatial stability, and minimal influence on ventricle pressure. In vivo biocompatibility tests also demonstrate the benefit of suppressing foreign-body responses for long-term implantation. With its general applicability to diverse materials and devices, this soft-interlayer design overcomes the material-level limitation for imparting tissue-level softness to a variety of bioelectronic devices.

Preferential perovskite surface-termination induced high piezoresponse in lead-free in situ fabricated Cs3Bi2Br9-PVDF nanocomposites promotes biomechanical energy harvesting

Lead-free halide perovskites have gained immense popularity in photovoltaic and energy harvesting applications because of their excellent optical and electrical attributes with minimal toxicity. We synthesized composite films of lead-free Cs₃Bi₂Br₉ perovskite embedded in the polyvinylidene fluoride (PVDF) matrix and have investigated their piezoelectric energy harvesting. Five PVDF@Cs₃Bi₂Br₉ composite films were fabricated with varying wt% of the perovskite in the PVDF. The composite with a 4 wt% of the perovskite shows 85% activation of the electroactive β-phase of PVDF. Additionally, this composite exhibits a maximum polarisation of ∼0.1 μC cm^-2 and the best energy storage density of ∼0.8 mJ cm^-3 at an applied field of ∼16 kV cm^-1 among all the synthesized composites. A nanogenerator fabricated using 4 wt% loading in the composite film produced an instantaneous output voltage of ∼40 V, an instantaneous current of ∼4.1 μA, and a power density of ∼17.8 μW cm^-2 across 10 MΩ resistance when repeatedly hammered by the human hand. The nanogenerator is further employed to light up several LEDs and to charge capacitors with a small active area demonstrating significant promise for prospective wearables and portable devices and paving the way for high-performance nanogenerators using lead-free halide perovskites. Density functional theory calculations were performed to understand the interaction of the electroactive phase of the PVDF with different perovskite surface terminations to unravel the various interaction mechanisms and their ensuing charge transfer properties.

Recent Advances in Triboelectric Nanogenerators: From Technological Progress to Commercial Applications

Serious climate changes and energy-related environmental problems are currently critical issues in the world. In order to reduce carbon emissions and save our environment, renewable energy harvesting technologies will serve as a key solution in the near future. Among them, triboelectric nanogenerators (TENGs), which is one of the most promising mechanical energy harvesters by means of contact electrification phenomenon, are explosively developing due to abundant wasting mechanical energy sources and a number of superior advantages in a wide availability and selection of materials, relatively simple device configurations, and low-cost processing. Significant experimental and theoretical efforts have been achieved toward understanding fundamental behaviors and a wide range of demonstrations since its report in 2012. As a result, considerable technological advancement has been exhibited and it advances the timeline of achievement in the proposed roadmap. Now, the technology has reached the stage of prototype development with verification of performance beyond the lab scale environment toward its commercialization. In this review, distinguished authors in the world worked together to summarize the state of the art in theory, materials, devices, systems, circuits, and applications in TENG fields. The great research achievements of researchers in this field around the world over the past decade are expected to play a major role in coming to fruition of unexpectedly accelerated technological advances over the next decade.

High Energy Harvesting Performances Silicone Elastomer via Filling Soft Dielectric with Stretching Deformability

Dielectric elastomer generators (DEGs) with high generated energy density and high conversion efficiency are of great interest. Among several dielectric elastomers (DEs), silicone elastomer filled with ceramic fillers have been extensively studied for their high elasticity, insulation, and permittivity. However, the stretched breakdown strength (E_bs ) of such composites decreases significantly under large strain, thus sharply reduces its energy harvesting performances. In this study, a polar rubber-based dielectric (GNBR) is synthetized and creatively used as "soft filler" for silicone elastomer. Benefiting from the deformability under stretching and its inherent strong interface bonding with silicone elastomer, this soft filler effectively avoids the formation of weak interface under large strain and reduces the local field strength of interface area. As expected, the composite filled with soft filler (GNBR/PMVS) shows enhanced E_bs of 2.8 times that of composite with traditional hard filler (TiO₂ /PMVS) under equibiaxial strain of 200%. As a result, GNBR/PMVS composite exhibits maximum energy density of 130.5 mJ g^-1 with up-to-date highest power conversion efficiency of reported DEG (44.5%). The findings will provide new insights in the rational design of DE composites characterized by high stretched breakdown strength for advanced energy harvesting system.

Parasitic capacitance modeling and measurements of conductive yarns for e-textile devices

Conductive yarns have emerged as a viable alternative to metallic wires in e-Textile devices, such as antennas, inductors, interconnects, and more, which are integral components of smart clothing applications. But the parasitic capacitance induced by their micro-structure has not been fully understood. This capacitance greatly affects device performance in high-frequency applications. We propose a lump-sum and turn-to-turn model of an air-core helical inductor constructed from conductive yarns, and systematically analyze and quantify the parasitic elements of conductive yarns. Using three commercial conductive yarns as examples, we compare the frequency response of copper-based and yarn-based inductors with identical structures to extract the parasitic capacitance. Our measurements show that the unit-length parasitic capacitance of commercial conductive yarns ranges from 1 fF/cm to 3 fF/cm, depending on the yarn's microstructure. These measurements offer significant quantitative estimation of conductive yarn parasitic elements and provide valuable design and characterization guidelines for e-Textile devices.

Fluoropolymer ferroelectrics: Multifunctional platform for polar-structured energy conversion

Ferroelectric materials are currently some of the most widely applied material systems and are constantly generating improved functions with higher efficiencies. Advancements in poly(vinylidene fluoride) (PVDF)-based polymer ferroelectrics provide flexural, coupling-efficient, and multifunctional material platforms for applications that demand portable, lightweight, wearable, and durable features. We highlight the recent advances in fluoropolymer ferroelectrics, their energetic cross-coupling effects, and emerging technologies, including wearable, highly efficient electromechanical actuators and sensors, electrocaloric refrigeration, and dielectric devices. These developments reveal that the molecular and nanostructure manipulations of the polarization-field interactions, through facile defect biasing, could introduce enhancements in the physical effects that would enable the realization of multisensory and multifunctional wearables for the emerging immersive virtual world and smart systems for a sustainable future.

An Advanced Strategy to Enhance TENG Output: Reducing Triboelectric Charge Decay

The Internet of Things (IoT) is poised to accelerate the construction of smart cities. However, it requires more than 30 billion sensors to realize the IoT vision, posing great challenges and opportunities for industries of self-powered sensors. Triboelectric nanogenerator (TENG), an emerging new technology, is capable of easily converting energy from surrounding environment into electricity, thus TENG has tremendous application potential in self-powered IoT sensors. At present, TENG encounters a bottleneck to boost output for large-scale commercial use if just by promoting triboelectric charge generation, because the output is decided by the triboelectric charge dynamic equilibrium between generation and decay. To break this bottleneck, the strategy of reducing triboelectric charge decay to enhance TENG output is focused. First, multiple mechanisms of triboelectric charge decay are summarized in detail with basic theoretical principles for future research. Furthermore, recent advances in reducing triboelectric charge decay are thoroughly reviewed and outlined in three aspects: inhibition and application of air breakdown, simultaneous inhibition of air breakdown and triboelectric charge drift/diffusion, and inhibition of triboelectric charge drift/diffusion. Finally, challenges and future research focus are proposed. This review provides reference and guidance for enhancing TENG output.

Technology Roadmap for Flexible Sensors

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.

Rational Design of Advanced Triboelectric Materials for Energy Harvesting and Emerging Applications

The properties of materials play a significant role in triboelectric nanogenerators (TENGs). Advanced triboelectric materials for TENGs have attracted tremendous attention because of their superior advantages (e.g., high specific surface area, high porosity, and customizable macrostructure). These advanced materials can be extensively applied in numerous fields, including energy harvester, wearable electronics, filtration, and self-powered sensors. Hence, designing triboelectric materials as advanced functional materials is important for the development of TENGs. Herein, the structural modification methods based on electrospinning to improve the triboelectric properties and the latest research progress in this kind of TENGs are systematically summarized. Preparation methods and design trends of nanofibers, microspheres, hierarchical structures, and doping nanomaterials are highlighted. The factors influencing the formation and properties of triboelectric materials are considered. Furthermore, the latest progress on the applications of TENGs is systematically elaborated. Finally, the challenges in the development of triboelectric materials are discussed, thereby guiding researchers in the large-scale application of TENGs.

Recent Progress in Piezoelectric-Triboelectric Effects Coupled Nanogenerators

Piezoelectric and triboelectric nanogenerators have been widely studied in the past years for their advantages of easy design/manufacturing, small size, and flexibility. Nanogenerators that are developed based on the coupled piezoelectric and triboelectric effects (PTCNG) can make full use of the mechanical energies and achieve both higher output and sensing performance. This review aims to cover the recent research progress of PTCNG by presenting in detail their key technologies in terms of operating principles, integration concept, and performance enhancement strategies, with a focus on their structural simplification and efficiency performance improvement. The latest applications of PTCNG in tactile sensors and energy-harvesting system are also illustrated. Finally, we discuss the main challenges and prospects for the future development of PTCNG, hoping that this work can provide a new insight into the development of all-in-one mechanical energy-scavenging and sensing devices.

A Review of Recent Development of Wearable Triboelectric Nanogenerators Aiming at Human Clothing for Energy Conversion

Research in the field of wearable triboelectric generators is increasing, and pioneering research into real applications of this technology is a growing need in both scientific and industry research. In addition to the two key characteristics of wearable triboelectric generators of flexibility and generating friction, features such as softness, breathability, washability, and wear resistance have also attracted a lot of attention from the research community. This paper reviews wearable triboelectric generators that are used in human clothing for energy conversion. The study focuses on analyzing fabric structure and examining the integration method of flexible generators and common fibers/yarns/textiles. Compared to the knitting method, the woven method has fewer restrictions on the flexibility and thickness of the yarn. Remaining challenges and perspectives are also investigated to suggest how to bring fully generated clothing to practical applications in the near future.

Utilizing Strain-Engineered Stable Halide Perovskite for Interfacial Interaction with Molecular Dipoles To Enhance Ferroelectric Switching and Piezoresponse in Polymer Composite Nanofibers

Mechanical and solar to electrical energy conversion using piezo- and ferroelectric and photovoltaic effects may be a practical answer to the rising energy demand. In this quest, piezoelectric polymer poly(vinylidene fluoride-hexafluoroproylene) (P(VDF-HFP)) has gained interest due to its superior piezo- and ferroelectricity. In photovoltaic applications, inorganic halide perovskite (IHP) of CsPbI₃ is considered a prime model compound. However, its application is limited because of the photoactive perovskite phase instability at ambient conditions. Here, we report the in situ synthesis of the stable perovskite γ-CsPbI₃ through an electrospinning process at room temperature, encapsulated within a ferroelectric copolymer poly(vinylidene fluoride-hexafluoroproylene) (P(VDF-HFP)) as a composite nanofiber. Computational calculation using density functional theory (DFT) reveals that tensile strain plays a critical role in the dynamical stabilization of γ-CsPbI₃. This tensile strain is triggered by the electrospinning process, which aids in the formation and growth of γ-CsPbI₃. In the CsPbI₃-P(VDF-HFP) composite nanofiber, γ-CsPbI₃ nucleates the polar β-crystalline phase in P(VDF-HFP), which results in the intrinsic piezo- and ferroelectric characteristics. The γ-CsPbI₃ aids in preferable molecular dipole orientation, resulting in improved nanoscale piezo- and ferroelectric properties. The composite nanofiber features a higher piezoelectric d₃₃ magnitude (∼30 pm/V) and lower decay constant for polarized domains (τ_composite ≈ 17). The composite was utilized as a piezoelectric nanogenerator to demonstrate human physiological motion monitoring in self-power mode. The relevant pressure sensitivities of 81 and 40 mV/kPa for the low-pressure (<0.6 kPa) and high-pressure (>0.6 to 12 kPa) ranges, respectively, promise its suitability in the health care sector.

2.11 - Accurate characterization of indoor photovoltaic performance

Ambient energy harvesting has great potential to contribute to sustainable development and address growing environmental challenges. Converting waste energy from energy-intensive processes and systems (e.g. combustion engines and furnaces) is crucial to reducing their environmental impact and achieving net-zero emissions. Compact energy harvesters will also be key to powering the exponentially growing smart devices ecosystem that is part of the Internet of Things, thus enabling futuristic applications that can improve our quality of life (e.g. smart homes, smart cities, smart manufacturing, and smart healthcare). To achieve these goals, innovative materials are needed to efficiently convert ambient energy into electricity through various physical mechanisms, such as the photovoltaic effect, thermoelectricity, piezoelectricity, triboelectricity, and radiofrequency wireless power transfer. By bringing together the perspectives of experts in various types of energy harvesting materials, this Roadmap provides extensive insights into recent advances and present challenges in the field. Additionally, the Roadmap analyses the key performance metrics of these technologies in relation to their ultimate energy conversion limits. Building on these insights, the Roadmap outlines promising directions for future research to fully harness the potential of energy harvesting materials for green energy anytime, anywhere.

Elastic Fibers/Fabrics for Wearables and Bioelectronics

Wearables and bioelectronics rely on breathable interface devices with bioaffinity, biocompatibility, and smart functionality for interactions between beings and things and the surrounding environment. Elastic fibers/fabrics with mechanical adaptivity to various deformations and complex substrates, are promising to act as fillers, carriers, substrates, dressings, and scaffolds in the construction of biointerfaces for the human body, skins, organs, and plants, realizing functions such as energy exchange, sensing, perception, augmented virtuality, health monitoring, disease diagnosis, and intervention therapy. This review summarizes and highlights the latest breakthroughs of elastic fibers/fabrics for wearables and bioelectronics, aiming to offer insights into elasticity mechanisms, production methods, and electrical components integration strategies with fibers/fabrics, presenting a profile of elastic fibers/fabrics for energy management, sensors, e-skins, thermal management, personal protection, wound healing, biosensing, and drug delivery. The trans-disciplinary application of elastic fibers/fabrics from wearables to biomedicine provides important inspiration for technology transplantation and function integration to adapt different application systems. As a discussion platform, here the main challenges and possible solutions in the field are proposed, hopefully can provide guidance for promoting the development of elastic e-textiles in consideration of the trade-off between mechanical/electrical performance, industrial-scale production, diverse environmental adaptivity, and multiscenario on-spot applications.

Soft, Multifunctional, Robust Film Sensor Using a Ferroelectret with Significant Longitudinal and Transverse Piezoelectric Activity for Biomechanical Monitoring

Soft and intelligent bioelectronics have achieved unprecedented development in both academics and industries over the last few decades, especially as ideal body-worn detectors for continuous human health status monitoring. However, the longstanding functional stability of bioelectronics in multiple environmental conditions of variant temperatures, humidities, and mechanical stimuli or even in some extremes, such as ultraviolet radiation and X-ray radiation, has confined the application of these electronics. Herein, a self-sustainable, multifunctional, robust sensor for biomechanical monitoring is prepared by hybridizing a parallel-tunnel fluorinated poly(ethylene propylene) (FEP) ferroelectret film (sensing layer) and poly(dimethylsiloxane) (PDMS, protection layer). A fast response (80 ms) and a low pressure detection limit (10 Pa) were achieved. Notably, the self-powered sensor can not only sensitively detect the loading of solid objects but also percept liquid water droplets and airflow, which satisfies the diverse needs of wearable devices. Meanwhile, the capability of stable and repeatable operation under a wide temperature range (-26-70 °C), extreme moisture, continuous mechanical stimulus (∼1.08 million cycles), and long-time ultraviolet radiation enabled the extensive and long-term application of such sensors in multiple scenarios. Moreover, the reproducibility of sensing performance after X-ray radiation can be realized through second contact polarization even after encapsulation. Due to the inherent mechanical flexibility, the fabricated sensor was conformally attached to rough and deformed skin and verified the feasibility of wearable biomechanical sensing with high sensitivity from facial smiling to plantar movement. This work provides an efficient strategy for multifunctional sensing, holding great promise for advanced soft bioelectronics in the next generation of wearable intelligent electronic systems.

Lead-Free Perovskite Cs3Bi2I9-Derived Electroactive PVDF Composite-Based Piezoelectric Nanogenerators for Physiological Signal Monitoring and Piezo-Phototronic-Aided Strain Modulated Photodetectors

In recent years, lead-free perovskite materials are exponentially emerging in photovoltaic and optoelectronic applications due to their low toxicity and superior optical properties. On the other hand, the demand for flexible, wearable, and lightweight optoelectronic devices is significantly growing in sensor and actuator technologies. In this scenario, lead-free perovskite-based flexible piezoelectric polymer composites have sparked considerable attention in this field due to their excellent piezo-, pyro-, ferroelectric, and photovoltaic properties. Thus, in this work, a long-term stable lead-free Cs₃Bi₂I₉-PVDF composite is introduced. The in situ growth of the Cs₃Bi₂I₉ perovskite induces 92% yield of the electroactive phase in the PVDF matrix. The possible mechanism behind the electroactive β-phase transformation is presented via interfacial interactions of PVDF moieties with the Cs₃Bi₂I₉ (CBI) perovskite, which also give rise to long-term environmental stability. Next, a piezoelectric nanogenerator (PNG) has been fabricated with the Cs₃Bi₂I₉-PVDF composite for mechanical energy harvesting, biophysiological motion monitoring, and voice recognitions that have potential utility in the health-care sector. Furthermore, a photodetector is developed to realize the piezo-phototronic effect. It exhibits a fast photoswitching behavior with rise and decay times of 141 and 278 ms, respectively. Thus, it is confirmed that the flexible Cs₃Bi₂I₉-PVDF composite has shown tremendous potential to be used as an optical signal-modulated piezo-responsive wearable sensor.

Performance optimization strategies of halide perovskite-based mechanical energy harvesters

Halide perovskites, possessing unique electronic and photovoltaic properties, have been intensively investigated over the past decade. The excellent polarization, piezoelectricity, dielectricity and photoelectricity of halide perovskites provide new opportunities for the applications of mechanical energy harvesting. Although various studies have been conducted to develop halide perovskite-based triboelectric and piezoelectric nanogenerators, strategies for their electrical performance optimization are rarely mentioned. In this review, we systematically introduce the recent research progress of halide perovskite-based mechanical energy harvesters and summarize the different optimization strategies for improving both the piezoelectric and triboelectric output of the devices, bringing some inspiration to guide future material and structure design for halide perovskite-based energy devices. A summary of the current challenges and future perspectives is also presented, offering some possible directions for development in this emerging field.

Manufacturing Technics for Fabric/Fiber-Based Triboelectric Nanogenerators: From Yarns to Micro-Nanofibers

Triboelectric nanogenerator (TENG), as a green energy harvesting technology, has aroused tremendous interest across many fields, such as wearable electronics, implanted electronic devices, and human-machine interfaces. Fabric and fiber-structured materials are excellent candidates for TENG materials due to their inherent flexibility, low cost, and high wearing comfort. Consequently, it is crucial to combine TENG with fabric/fiber materials to simultaneously leverage their mechanical energy harvesting and wearability advantages. In this review, the structure and fundamentals of TENG are briefly explained, followed by the introduction of three distinct methods for preparing fabric/fiber structures: spinning and weaving, wet spinning, and electrospinning. In the meantime, their applications have been discussed, focusing primarily on energy harvesting and wearable self-powered sensors. Finally, we discussed the future and challenges of fabric and fiber-based TENGs.

Synergistic Enhancement Properties of a Flexible Integrated PAN/PVDF Piezoelectric Sensor for Human Posture Recognition

The flexible pressure sensor has attracted much attention due to its wearable and conformal advantage. All the same, enhancing its electrical and structural properties is still a huge challenge. Herein, a flexible integrated pressure sensor (FIPS) composed of a solid silicone rubber matrix, composited with piezoelectric powers of polyacrylonitrile/Polyvinylidene fluoride (PAN/PVDF) and conductive silver-coated glass microspheres is first proposed. Specifically, the mass ratio of the PAN/PVDF and the rubber is up to 4:5 after mechanical mixing. The output voltage of the sensor with composite PAN/PVDF reaches 49 V, which is 2.57 and 3.06 times that with the single components, PAN and PVDF, respectively. In the range from 0 to 800 kPa, its linearity of voltage and current are all close to 0.986. Meanwhile, the sensor retains high voltage and current sensitivities of 42 mV/kPa and 0.174 nA/kPa, respectively. Furthermore, the minimum response time is 43 ms at a frequency range of 1-2.5 Hz in different postures, and the stability is verified over 10,000 cycles. In practical measurements, the designed FIPS showed excellent recognition abilities for various gaits and different bending degrees of fingers. This work provides a novel strategy to improve the flexible pressure sensor, and demonstrates an attractive potential in terms of human health and motion monitoring.