Vacancy Defects in 2D Transition Metal Dichalcogenide Electrocatalysts: From Aggregated to Atomic Configuration

A review on defect modulated electrocatalysts for the oxygen evolution reaction

The oxygen evolution reaction (OER) is crucial for applications such as water splitting and rechargeable metal-air batteries. Recent research has focused on improving the activity and stability of OER electrocatalysts through various strategies including structural innovation, heteroatom doping, and conductivity enhancement. Among these, defect engineering has proved particularly effective, allowing precise modulation of the materials' electronic structure at the atomic level. This review addresses defect-rich materials that exhibit superior electrochemical properties for OER applications, with a particular focus on developments from the past five years. The discussion starts with an overview of the OER catalytic mechanism and then delves into the types of defects, synthesis methods, and their impact on electrochemical performance. This review concludes with insights into the rational design and synthesis of advanced electrocatalysts, aiming to improve efficiency and extend operational longevity. The objective is to highlight approaches for creating high-performance OER electrocatalysts that outperform noble-metal based systems in both activity and stability.

Phase and Defect Engineering of MoSe2 Nanosheets for Enhanced NIR-II Photothermal Immunotherapy

Inducing immunogenic cell death (ICD) during photothermal therapy (PTT) has the potential to effectively trigger photothermal immunotherapy (PTI). However, ICD induced by PTT alone is often limited by inefficient PTT, low immunogenicity of tumor cells, and a dysregulated redox microenvironment. Herein, we develop MoSe2 nanosheets with high-percentage metallic 1T phase and rich exposed active Mo centers through phase and defect engineering of MoSe2 as an effective nanoagent for PTI. The metallic 1T phase in MoSe2 nanosheets endows them with strong PTT performance, and the abundant exposed active Mo centers endow them with high activity for glutathione (GSH) depletion. The MoSe2-mediated high-performance PTT synergizing with efficient GSH depletion facilitates the release of tumor-associated antigens to induce robust ICD, thus significantly enhancing checkpoint blockade immunotherapy and activating systemic immune response in mouse models of colorectal cancer and triple-negative metastatic breast cancer.

Challenges and Opportunities for Single-Atom Electrocatalysts: From Lab-Scale Research to Potential Industry-Level Applications

Single-atom electrocatalysts (SACs) are a class of promising materials for driving electrochemical energy conversion reactions due to their intrinsic advantages, including maximum metal utilization, well-defined active structures, and strong interface effects. However, SACs have not reached full commercialization for broad industrial applications. This review summarizes recent research achievements in the design of SACs for crucial electrocatalytic reactions on their active sites, coordination, and substrates, as well as the synthesis methods. The key challenges facing SACs in activity, selectivity, stability, and scalability, are highlighted. Furthermore, it is pointed out the new strategies to address these challenges including increasing intrinsic activity of metal sites, enhancing the utilization of metal sites, improving the stability, optimizing the local environment, developing new fabrication techniques, leveraging insights from theoretical studies, and expanding potential applications. Finally, the views are offered on the future direction of single-atom electrocatalysis toward commercialization.

Spatially Confined Microcells: A Path toward TMD Catalyst Design

With the ability to maximize the exposure of nearly all active sites to reactions, two-dimensional transition metal dichalcogenide (TMD) has become a fascinating new class of materials for electrocatalysis. Recently, electrochemical microcells have been developed, and their unique spatial-confined capability enables understanding of catalytic behaviors at a single material level, significantly promoting this field. This Review provides an overview of the recent progress in microcell-based TMD electrocatalyst studies. We first introduced the structural characteristics of TMD materials and discussed their site engineering strategies for electrocatalysis. Later, we comprehensively described two distinct types of microcells: the window-confined on-chip electrochemical microcell (OCEM) and the droplet-confined scanning electrochemical cell microscopy (SECCM). Their setups, working principles, and instrumentation were elucidated in detail, respectively. Furthermore, we summarized recent advances of OCEM and SECCM obtained in TMD catalysts, such as active site identification and imaging, site monitoring, modulation of charge injection and transport, and electrostatic field gating. Finally, we discussed the current challenges and provided personal perspectives on electrochemical microcell research.

Integrated Heterogeneous Engineering with the Vacancy Defect of Porous CoPv-MoxPv Nanosheets for an Accelerated Hydrogen Evolution Reaction

Electrochemical water splitting is a possible way of realizing sustainable and clean hydrogen production but is challenging, because a highly active and durable electrocatalyst is essential. In this work, we integrated heterogeneous engineering and vacancy defect strategies to design and fabricate a heterostructure electrocatalyst (CoPv-MoxPv/CNT) with abundant phosphorus vacancies attached to carbon nanotubes (CNTs). The vacancy defects enabled the optimization of the electronic structure; thereby, the electron-rich low-valent metal sites enhanced the ability of nonmetallic P to capture proton H. Meanwhile, the heterogeneous interface between bimetallic phosphides and CNTs realized rapid electron transfer. In addition, the Co, Mo, and P active species in the electrocatalytic process exposed increased amounts of active sites featuring porous nanosheet structures, which facilitated the adsorption of reaction intermediates and thus enhanced the hydrogen evolution reaction performance. In particular, the optimized CoPv-MoxPv/CNT catalyst possesses an overpotential of 138 mV at a current density of 10 mA cm-2 and long-term stability for 24 h. This work offers insights and possibilities for the engineering and exploration of transition metal-based electrocatalysts through combining multiple synergistic strategies.

Material Engineering Strategies for Efficient Hydrogen Evolution Reaction Catalysts

Water electrolysis, a key enabler of hydrogen energy production, presents significant potential as a strategy for achieving net-zero emissions. However, the widespread deployment of water electrolysis is currently limited by the high-cost and scarce noble metal electrocatalysts in hydrogen evolution reaction (HER). Given this challenge, design and synthesis of cost-effective and high-performance alternative catalysts have become a research focus, which necessitates insightful understandings of HER fundamentals and material engineering strategies. Distinct from typical reviews that concentrate only on the summary of recent catalyst materials, this review article shifts focus to material engineering strategies for developing efficient HER catalysts. In-depth analysis of key material design approaches for HER catalysts, such as doping, vacancy defect creation, phase engineering, and metal-support engineering, are illustrated along with typical research cases. A special emphasis is placed on designing noble metal-free catalysts with a brief discussion on recent advancements in electrocatalytic water-splitting technology. The article also delves into important descriptors, reliable evaluation parameters and characterization techniques, aiming to link the fundamental mechanisms of HER with its catalytic performance. In conclusion, it explores future trends in HER catalysts by integrating theoretical, experimental and industrial perspectives, while acknowledging the challenges that remain.

Time-averaged atomic volume spectrum: locating and identifying vacancies

Vacancies, as well as their derivatives, usually play a crucial role in many essential properties of materials. However, they always behave erratically, especially under universal thermal vibration, and are therefore difficult to accurately locate. Until now, the lack of an accurate and flexible method for locating and identifying vacancies has hampered the development of relative fields. In this paper, we present a new method to solve this problem. The strategy is to target the atomic cage enwrapping vacancies instead of the vacancies themselves. The core of the method is a time-averaged atomic volume spectrum (TAVS). The key to this method is to identify atoms using time-averaged rather than transient atomic volume, thereby simultaneously denoising intrinsic thermal vibration and avoiding vacancy migration jump. Using this method, we have succeeded for the first time in obtaining the panoramic maps of spontaneously trapped defects in quenched and annealed face-centered cubic aluminum and even the instantaneous images of a steady trapping process. All characteristics of each trapped vacancy, including location, dimension, volume and morphology, as well as aggregate statistical data such as vacancy amount and concentration, can be completely and accurately obtained. Furthermore, these first maps of defects (vacancies) revealed some surprising and interesting phenomena for future exploration. In conclusion, this method provides not only a means of locating and catching vacancies, but also a strategy for identifying and characterizing vacancies. On the basis of its successful application in FCC Al, the TAVS method can be easily extended to other systems as well.

Electrochemical Generation of Te Vacancy Pairs in PtTe for Efficient Hydrogen Evolution

Two-dimensional (2D) van der Waals materials are increasingly seen as potential catalysts due to their unique structures and unmatched properties. However, achieving precise synthesis of these remarkable materials and regulating their atomic and electronic structures at the most fundamental level to enhance their catalytic performance remain a significant challenge. In this study, we synthesized single-crystal bulk PtTe crystals via chemical vapor transport and subsequently produced atomically thin, large PtTe nanosheets (NSs) through electrochemical cathode intercalation. These NSs are characterized by a significant presence of Te vacancy pairs, leading to undercoordinated Pt atoms on their basal planes. Experimental and theoretical studies together reveal that Te vacancy pairs effectively optimize and enhance the electronic properties (such as charge distribution, density of states near the Fermi level, and d-band center) of the resultant undercoordinated Pt atoms. This optimization results in a significantly higher percentage of dangling O-H water, a decreased energy barrier for water dissociation, and an increased binding affinity of these Pt atoms to active hydrogen intermediates. Consequently, PtTe NSs featuring exposed and undercoordinated Pt atoms demonstrate outstanding electrocatalytic activity in hydrogen evolution reactions, significantly surpassing the performance of standard commercial Pt/C catalysts.

Construction of Co-Se-W at Interfaces of Phase-Mixed Cobalt Selenide via Spontaneous Phase Transition for Platinum-Like Hydrogen Evolution Activity and Long-Term Durability in Alkaline and Acidic Media

Cost-effective transition metal chalcogenides are highly promising electrocatalysts for both alkaline and acidic hydrogen evolution reactions (HER). However, unsatisfactory HER kinetics and stability have severely hindered their applications in industrial water electrolysis. Herein, a nanoflowers-shaped W-doped cubic/orthorhombic phase-mixed CoSe2 catalyst ((c/o)-CoSe2-W) is reported. The W doping induces spontaneous phase transition from stable phase cubic CoSe2 (c-CoSe2) to metastable phase orthorhombic CoSe2, which not only enables precise regulation of the ratio of two phases but also realizes W doping at the interfaces of two phases. The (c/o)-CoSe2-W catalyst exhibits a Pt-like HER activity in both alkaline and acidic media, with record-low HER overpotentials of 29.8 mV (alkaline) and 35.9 mV (acidic) at 10 mA cm-2, respectively, surpassing the vast majority of previously reported non-precious metal electrocatalysts for both alkaline and acidic HER. The Pt-like HER activities originate from the formation of Co-Se-W active species on the c-CoSe2 side at the phase interface, which effectively modulates electron structures of active sites, not only enhancing H2O adsorption and dissociation at Co sites but also optimizing H* adsorption to ΔGH* ≈ 0 at W sites. Benefiting from the abundant phase interfaces, the catalyst also displays outstanding long-term durability in both acidic and alkaline media.

FeSe2 and Its Composites for Pollutants Removal: Synthesis, Mechanisms, and Application Potential

In recent years, the research of FeSe2 and its composites in environmental remediation has been gradually carried out. And the FeSe2 materials show great catalytic performance in photocatalysis, electrocatalysis, and Fenton-like reactions for pollutants removal. Therefore, the studies and applications of FeSe2 materials are reviewed in this work, including the common synthesis methods, the role of Fe and Se species as well as the catalyst structure, and the potential for practical environmental applications. Hereinto, it is worth noting in particular that the lower-valent Se (Se2- ), unsaturated Se (Se- ), and Se vacancies (VSe ) can play different roles in promoting pollutants removal. In addition, the FeSe2 material also demonstrates high stability, reusability, and adaptability over a wider pH range as well as universality to different pollutants. In view of the overall great properties and performance of FeSe2 materials compared with other typical Fe-based materials, it deserves and needs further research. And finally, this paper presents some challenges and perspectives in future development, looking forward to providing helpful guidance for the subsequent research of FeSe2 and its composites for environmental application.

Synergistic Effects of Dual-Doping with Ni and Ru in Monolayer VS2 Nanosheet: Unleashing Enhanced Performance for Acidic HER through Defects and Strain

Amidst the escalating quest for clean energy, the hydrogen evolution reaction (HER) in acidic conditions has taken center stage, catalyzing the search for advanced electrocatalysts. The efficacy of these materials is predominantly dictated by the active site density on their surfaces. The propensity is leveraged for monolayer architectures to introduce defects, enhancing surface area, and increasing active sites. Doping enhances defects and fine-tunes catalyst activity. In this vein, defect-enriched monolayer nanosheets doped with nickel and a trace amount of ruthenium in VS2 (SL-Ni-Ru-VS2 ) are engineered and characterized. Evaluation in 0.5 m H2 SO4 solution unveils that the catalyst achieves overpotentials as low as 20 and 41 mV at current densities of -10 and -100 mA cm⁻2 . Impressively, the catalyst maintains a mass activity of 13.08 A mg⁻¹Ru , even with minimal Ru incorporation, indicating exceptional catalytic efficiency. This monolayer catalyst sustains its high activity at lower overpotentials, demonstrating its practical applicability. The comprehensive analysis, which combines experimental data and computational simulations, indicates that the co-doping of Ni and Ru enhances the electrocatalytic properties of VS2 . This research offers a strategic framework for crafting cutting-edge electrocatalysts specifically designed for enhanced performance in the HER.

Zeolitic Imidazolate Framework-Derived Co3S4@NiFe-LDH Core-Shell Heterostructure as Efficient Bifunctional Electrocatalyst for Water Splitting

The development of stable and efficient bifunctional electrocatalysts is of utmost importance for overall water splitting. This study introduces Co3S4@NiFe-LDH core-shell heterostructure prepared via an electrodeposition of ultrathin NiFe-LDH nanosheet on zeolitic imidazolium framework-derived Co3S4 nanosheet arrays. The bifunctional Co3S4@NiFe-LDH/NF exhibits impressive catalytic performance and long-term stability for both the OER and HER with low overpotentials of 100 mA cm-2 at 235 mV and 10 mA cm-2 at 95 mV in 1 M KOH, respectively. The assembled cell with Co3S4@NiFe-LDH/NF as both cathode and anode shows voltages of 1.595 and 1.666 V at current densities of 10 and 20 mA cm-2, respectively, as well as ultralong stability over 500 h. DFT calculations expose a robust electron interaction at the heterogeneous interface of the Co3S4@NiFe-LDH/NF core-shell structure. This interaction promotes electron transfer from NiFe-LDH to Co3S4 and reduces the energy barriers for OER intermediates, thereby enhancing electrocatalytic activity. This research contributes novel insights toward the promising materials for electrochemical water splitting through the construction of heterojunction interfaces.

Rational Design of Stimuli-Responsive Inorganic 2D Materials via Molecular Engineering: Toward Molecule-Programmable Nanoelectronics

The ability of electronic devices to act as switches makes digital information processing possible. Succeeding graphene, emerging inorganic 2D materials (i2DMs) have been identified as alternative 2D materials to harbor a variety of active molecular components to move the current silicon-based semiconductor technology forward to a post-Moore era focused on molecule-based information processing components. In this regard, i2DMs benefits are not only for their prominent physiochemical properties (e.g., the existence of bandgap), but also for their high surface-to-volume ratio rich in reactive sites. Nonetheless, since this field is still in an early stage, having knowledge of both i) the different strategies for molecularly functionalizing the current library of i2DMs, and ii) the different types of active molecular components is a sine qua non condition for a rational design of stimuli-responsive i2DMs capable of performing logical operations at the molecular level. Consequently, this Review provides a comprehensive tutorial for covalently anchoring ad hoc molecular components-as active units triggered by different external inputs-onto pivotal i2DMs to assess their role in the expanding field of molecule-programmable nanoelectronics for electrically monitoring bistable molecular switches. Limitations, challenges, and future perspectives of this emerging field which crosses materials chemistry with computation are critically discussed.

The Synergistic Effect between Metal and Sulfur Vacancy to Boost CO2 Reduction Efficiency: A Study on Descriptor Transferability and Activity Prediction

Both metal center active sites and vacancies can influence the catalytic activity of a catalyst. A quantitative model to describe the synergistic effect between the metal centers and vacancies is highly desired. Herein, we proposed a machine learning model to evaluate the synergistic index, PSyn, which is learned from the possible pathways for CH4 production from CO2 reduction reaction (CO2RR) on 26 metal-anchored MoS2 with and without sulfur vacancy. The data set consists of 1556 intermediate structures on metal-anchored MoS2, which are used for training. The 2028 structures from the literature, comprising both single active site and dual active sites, are used for external test. The XGBoost model with 3 features, including electronegativity, d-shell valence electrons of metal, and the distance between metal and vacancy, exhibited satisfactory prediction accuracy on limiting potential. Fe@Sv-MoS2 and Os@MoS2 are predicted to be promising CO2RR catalysts with high stability, low limiting potential, and high selectivity against hydrogen evolution reactions (HER). Based on some easily accessible descriptors, transferability can be achieved for both porous materials and 2D materials in predicting the energy change in the CO2RR and nitrogen reduction reaction (NRR). Such a predictive model can also be applied to predict the synergistic effect of the CO2RR in other oxygen and tungsten vacancy systems.

Drawing Inspiration from Nature: Trinitarian Strategies for Designing Polyoxometalates and Metal-Organic Framework-Based Biomimetic Microhoneycomb Electromagnetic Wave-Absorbing Materials

Trinitarian designs in the morphology, components, and microstructure remain challenging for advanced electromagnetic wave absorption (EMWA) materials with light weight, strong absorption, and well-defined structure-function relationships. Herein, a series of X-doped MoS2/Cu9S5 with multilevel honeycomb structures (X-MoS2/Cu9S5 MHs, X = P, Si, Ge) were designed by space-confined growth and in situ sulfidation of a polyoxometalate-based metal-organic framework. X-MoS2/Cu9S5 MHs possess low density, high surface area, and abundant cation-cuprum and anion-sulfur double vacancies (VCu and VS) simultaneously that are unmatched by conventional EMWA materials. Also, the systematic investigation of the doping effect of various polyoxometalate heteroatoms on VCu and VS in the microhoneycomb has been conducted. Experimental results and density functional theory calculations reveal that the excellent EMWA performance (-56.21 dB) results from the synergistic effect of morphology design, component optimization, and vacancy regulation. This study not only provides an important opportunity to understand a morphology-component-microstructure strategy in electromagnetic wave absorption but also builds a noteworthy bridge between bioinspired engineering and microscale absorbers.

Enhanced Superconductivity and Critical Current Density Due to the Interaction of InSe2 Bonded Layer in (InSe2)0.12NbSe2

Superconductivity was discovered in (InSe2)xNbSe2. The materials are crystallized in a unique layered structure where bonded InSe2 layers are intercalated into the van der Waals gaps of 2H-phase NbSe2. The (InSe2)0.12NbSe2 superconductor exhibits a superconducting transition at 11.6 K and critical current density of 8.2 × 105 A/cm2. Both values are the highest among all transition metal dichalcogenide superconductors at ambient pressure. The present finding provides an ideal material platform for further investigation of superconducting-related phenomena in transition metal dichalcogenides.

Defective ReS2 Triggers High Intrinsic Piezoelectricity for Piezo-Photocatalytic Efficient Sterilization

Rhenium disulfide (ReS2) is a promising piezoelectric catalyst due to its excellent electron transfer ability and abundant unsaturated sites. The 1T' phase structure leads to the evolution of ReS2 into a centrosymmetric spatial structure, which restricts its application in piezoelectric catalysis. Herein, we propose a controllable defect engineering strategy to trigger the piezoelectric response of ReS2. The introduction of vacancy defects disrupts the initial centrosymmetric structure, which breaks the piezoelectric polarization bond and generates piezoelectric properties. By using transmission electron microscopy, we characterized it at the atomic scale and determined that vacancy defects contribute to an excellent piezoelectric property through first-principles calculations. Notably, the piezoelectric coefficient of the catalyst with 40 s-etching (ReS2@C-40) is 23.07 pm/V, an order of magnitude greater than other transition metal dichalcogenides. It demonstrated the feasibility of optimizing piezoelectric properties by increasing the conformational asymmetry. Based on its remarkable piezoelectric activity, ReS2@C-40 exhibits highly efficient piezo-photocatalytic synergistic sterilization performance with 99.99% eradication of Escherichia coli and 96.67% of Staphylococcus aureus within 30 min. This pioneering research on the coupling effect of ReS2 in piezoelectric catalysis and photocatalysis provides ideas for the development of piezo-photocatalysts and efficient water purification technologies.

Enhanced electrocatalytic hydrogen evolution from nitrogen plasma-tailored MoS2 nanostructures

Two-dimensional (2D) layered transition metal dichalcogenides such as MoS2 have been viewed as the most favorable candidates for replacing noble metals in catalyzing the hydrogen evolution reaction in water splitting owing to their earth abundance, superb chemical stability, and appropriate Gibbs free energy. However, due to its low number of catalytic sites and basal catalytic inertia, the pristine MoS2 displayed intrinsically unsatisfactory HER catalytic activity. Here, the hydrogen evolution catalytic activities of nanostructured MoS2 powder before and after plasma modification with nitrogen doping were experimentally compared, and the influence of treatment parameters on the hydrogen evolution catalytic performance of MoS2 has been studied. The feasibility of regulating hydrogen evolution catalytic activity by nitrogen doping of MoS2 was verified based on density functional theory calculations. Our work demonstrates a more convenient and faster way to develop cheap and efficient MoS2-based catalysts for electrochemical hydrogen evolution reactions. Additionally, theoretical studies reveal that N-doped MoS2 exhibits strong hybridization between Mo-d and N-p states, causing magnetism to evolve, as confirmed by experiments.

Revealing Redox Behavior of Molybdenum Disulfide and Its Application as Rechargeable Antioxidant Reservoir

Molybdenum disulfide (MoS2) is a representative two-dimensional transition metal dichalcogenide and has a unique electronic structure and associated physicochemical properties. The redox property of MoS2 has recently attracted significant attention from various fields, such as biomedical applications. Intriguingly, MoS2 functions as an antioxidant in certain applications and as a pro-oxidant in others. We use the mediated electrochemical probing method to understand the redox behavior of MoS2. This method reveals that MoS2 (i) has a reversible and fast redox activity at a mild potential (between -0.20 and +0.25 V vs Ag/AgCl), (ii) functions as an antioxidant for molecules that have different redox mechanisms (electron or hydrogen atom transfer), and (iii) is electrochemically or molecularly rechargeable. Finally, we show that MoS2 reduces oxidized molecules more efficiently than the potent natural antioxidant, curcumin. This study enhances our understanding of MoS2 and shows its potential as an advanced antioxidant reservoir.

High Resolution Electrochemical Imaging for Sulfur Vacancies on 2D Molybdenum Disulfide

Molybdenum disulfide (MoS₂ ) is considered as one of the most promising non-noble-metal catalysts for hydrogen evolution reaction (HER). To achieve practical application, introducing sulfur (S) vacancies on the inert basal plane of MoS₂ is a widely accepted strategy to improve its HER activity. However, probing active sites at the nanoscale and quantitatively analyzing the related electrocatalytic activity in electrolyte aqueous solution are still great challenges. In this work, utilizing high-resolution scanning electrochemical microscopy, optimized electrodes and newly designed thermal drift calibration software, the HER activity of the S vacancies on an MoS₂ inert surface is in situ imaged with less than 20-nm-radius sensitivity and the HER kinetic data for S vacancies, including Tafel plot and onset potential, are quantitatively measured. Additionally, the stability of S vacancies over the wide range of pH 0-13 is investigated. This study provides a viable strategy for obtaining the catalytic kinetics of nanoscale active sites on structurally complex electrocatalysts and evaluating the stability of defects in different environments for 2D material-based catalysts.

Single-atom catalysts for electrochemical applications

The field of small molecule electro-activated conversion is becoming a new star in modern catalytic research toward the carbon-neutral future. The advent of single-atom catalysts (SACs) is expected to greatly accelerate the kinetics of electrocatalytic reactions such as the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), hydrogen oxidation reaction (HOR), etc., owing to their maximum atomic efficiency, unique quantized energy level structure and strong interaction between well-defined active sites and supports. In this feature article, our group's proposed synthesis methodology applied in electrocatalysis is mainly summarized. Furthermore, we elaborate on how to achieve the stabilization of single metal atoms against migration and agglomeration during the preparation of SACs. Moreover, the electrochemical applications of SACs with a focus on the above heterogeneous reactions are presented. Finally, the prospects for the development and deficiencies of these SACs for electrocatalytic reactions are discussed.