A Molecularly Tailored Photosensitizer with an Efficiency of 13.2% for Dye-Sensitized Solar Cells

Alkyl effects on charge recombination in copper electrolyte-based dye-sensitized solar cells: Insights for targeted molecular design towards high performance

Two quinoxaline dyes utilized in copper-electrolyte-based dye-sensitized solar cells (Cu-DSSCs) are theoretically investigated to analyze the impact of alkyl chains on dye performance. The investigation shows that ZS4, known for its record efficiency of up to 13.2 %, exhibits higher electron coupling and fewer binding sites for dye-[Cu(tmby)2]2+ interaction compared to ZS5. Contrary to common belief, alkyl chains are found to not only provide shielding but also hinder the interaction between dye and [Cu(tmby)2]2+ by influencing the optimal conformation of dyes, thereby impeding the charge recombination process. It is crucial to consider the influence of alkyl chains on dye conformation when discussing the relationship between dye structure and performance, rather than oversimplifying it as often done traditionally. Building on these findings, eight dyes are strategically designed by adjusting the position of the alkyl chain to further decrease charge recombination compared to ZS4. Theoretical evaluation of these dyes reveals that changing the alkyl chain on the nitrogen atom from 2-ethylhexyl (ZS4) to 1-hexylheptyl (D3-2) not only reduces the charge recombination rate but also enhances light harvesting ability. Therefore, D3-2 shows potential as a candidate for experimental synthesis of high-performance Cu-DSSCs with improved efficiency.

Molecular Engineering Strategies of Spectral Matching and Structure Optimization for Efficient Metal-Free Organic Dyes in Dye-Sensitized Solar Cells: A Theoretical Study

Metal-free organic dyes are promising dyes that can be applied widely in dye-sensitized solar cells (DSSCs). The rational design and selection of dyes with complementary absorption can promote the development of methods that can enhance the utilization of incident light by DSSCs, such as cosensitization and tandem devices. Based on these opinions, the structure of the reported high-performance metal-free organic dye ZL003 is used as a template to design two new metal-free organic dyes, HX-1 and HX-2, by replacing its donor unit with a 2-phenothiazine-phenylamine unit and fusing its three independent π-bridge units into a whole with the aim of driving the red shift and the blue shift of the absorption spectra of ZL003, respectively. Through theoretical investigation, it is demonstrated that the perfect complementary optical absorption of HX-1 and HX-2 can be realized as the shift of the absorption spectra of ZL003 to different directions, which means their feasibility to the application in cosensitization or tandem dye-sensitized solar cells (T-DSSCs). Furthermore, it is hypothesized that HX-1 may be the dye with better photovoltaic performance than ZL003 by modeling their intramolecular charge-transfer (ICT) processes, TiO2 surface adsorption, and photovoltaic parameters. The short-circuit current density (Jsc) and photoelectric conversion efficiency (PCE) of HX-1 are 23.10 mA·cm-2 and 21.26% in theory, compared to those of 20.68 mA·cm-2 and 19.64% in ZL003 at the same computational level, respectively. In view of the complementary optical properties, the combination of HX-1 with HX-2 may be a reasonable option for dyes for the development of a highly efficient cosensitization system or T-DSSCs in the future. In terms of such findings, these two novel metal-free organic dyes may have bright prospects in the research of highly efficient DSSCs, and this work can provide a reference for the design of dyes with complementary absorption through simple structural adjustments of the realistic dyes with high photovoltaic performance.

Recent advances in the approaches for improving the photovoltaic performance of porphyrin-based DSSCs

Among other photovoltaic techniques including perovskite solar cells and organic solar cells, dye-sensitized solar cells (DSSCs) are considered to be a potential alternative to conventional silicon solar cells. Porphyrins are promising dyes with the properties of easy modification and superior light-harvesting capability. However, porphyrin dyes still suffer from a number of unfavorable aspects, which need to be addressed in order to improve the photovoltaic performance. This feature article briefly summarizes the recent progress in improving the Voc and Jsc of porphyrin-based DSSCs in terms of molecular engineering by modifying the porphyrin macrocycle, donor and acceptor moieties of the porphyrin dyes, coadsorption of the porphrin dyes with bulky coadsorbents like chenodeoxycholic acid (CDCA), and cosensitization of the porphyrin dyes with metal-free organic dyes. Notably, concerted companion (CC) dyes are described in detail, which have been constructed by linking a porphyrin dye subunit and a metal-free organic dye subunit with flexible alkoxy chains to achieve panchromatic absorption and concerted enhancement of Voc and Jsc. In one sentence, this article is expected to provide further insights into the development of high performance DSSCs through the design and syntheses of efficient porphyrin dyes and CC dyes in combination with device optimization to achieve simultaneously elevated Voc and Jsc, which may inspire and promote further progress in the commercialization of the DSSCs.

New Nanophotonics Approaches for Enhancing the Efficiency and Stability of Perovskite Solar Cells

Over the past decade, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has experienced a remarkable ascent, soaring from 3.8% in 2009 to a remarkable record of 26.1% in 2023. Many recent approaches for improving PSC performance employ nanophotonic technologies, from light harvesting and thermal management to the manipulation of charge carrier dynamics. Plasmonic nanoparticles and arrayed dielectric nanostructures have been applied to tailor the light absorption, scattering, and conversion, as well as the heat dissipation within PSCs to improve their PCE and operational stability. In this review, it is begin with a concise introduction to define the realm of nanophotonics by focusing on the nanoscale interactions between light and surface plasmons or dielectric photonic structures. Prevailing strategies that utilize resonance-enhanced light-matter interactions for boosting the PCE and stability of PSCs from light trapping, carrier transportation, and thermal management perspectives are then elaborated, and the resultant practical applications, such as semitransparent photovoltaics, colored PSCs, and smart perovskite windows are discussed. Finally, the state-of-the-art nanophotonic paradigms in PSCs are reviewed, and the benefits of these approaches in improving the aesthetic effects and energy-saving character of PSC-integrated buildings are highlighted.

Recent Investigations on the Use of Copper Complexes as Molecular Materials for Dye-Sensitized Solar Cells

Three decades ago, dye-sensitized solar cells (DSSCs) emerged as a route for harnessing the sun's energy and converting it into electricity. Since then, an impressive amount of work has been devoted to improving the global photovoltaic efficiency of DSSCs, trying to optimize all components of the device. Up to now, the best efficiencies have usually been reached with ruthenium(II) photosensitizers, even if in the last few years many classes of organic compounds have shown record efficiencies. However, the future of DSSCs is stringently connected to the research and development of cheaper materials; in particular, the replacement of rare metals with abundant ones is an important topic in view of the long-term sustainability of DSSCs intended to replace the consolidated fossil-based technology. In this context, copper is a valid candidate, being both an alternative to ruthenium in the fabrication of photosensitizers and a material able to replace the common triiodide/iodide redox couple. Thus, recently, some research papers have confirmed the great potential of copper(I) coordination complexes as a cheap and convenient alternative to ruthenium dyes. Similarly, the use of copper compounds as electron transfer mediators for DSSCs can be an excellent way to solve the problems related to the more common I3-/I- redox couple. The goal of this mini-review is to report on the latest research devoted to the use of versatile copper complexes as photosensitizers and electron shuttles in DSSCs. The coverage, from 2022 up to now, illustrates the most recent studies on dye-sensitized solar cells based on copper complexes as molecular materials.

Quinoxaline derivatives as attractive electron-transporting materials

This review article provides a comprehensive overview of recent advancements in electron transport materials derived from quinoxaline, along with their applications in various electronic devices. We focus on their utilization in organic solar cells (OSCs), dye-sensitized solar cells (DSSCs), organic field-effect transistors (OFETs), organic-light emitting diodes (OLEDs) and other organic electronic technologies. Notably, the potential of quinoxaline derivatives as non-fullerene acceptors in OSCs, auxiliary acceptors and bridging materials in DSSCs, and n-type semiconductors in transistor devices is discussed in detail. Additionally, their significance as thermally activated delayed fluorescence emitters and chromophores for OLEDs, sensors and electrochromic devices is explored. The review emphasizes the remarkable characteristics and versatility of quinoxaline derivatives in electron transport applications. Furthermore, ongoing research efforts aimed at enhancing their performance and addressing key challenges in various applications are presented.

Synergistic Effect of Size-Tailored Structural Engineering and Postinterface Modification for Highly Efficient and Stable Dye-Sensitized Solar Cells

Despite significant progress in device performance, dye-sensitized solar cells (DSSCs) continue to fall short of their theoretical potential. Moreover, research in recent years needs to pay more attention to improving the device fabrication process. To achieve the theoretical efficiency limit, it is crucial to optimize the interface between the dye and TiO2 nanoparticles in the entire device stack. Our study indicates that optimizing the structure or size of the coadsorbents and implementing a monolayer adsorption process can be an effective strategy to reduce charge recombination and enhance light-harvesting properties. Our research aims to develop a surface-coating adsorbent plan that controls the TiO2 nanoparticle interface to achieve the radiative limit of power conversion efficiency (PCE). Specifically, we utilized 2-thiophenecarboxylic acid (THCA) or chenodeoxycholic acid (CDCA) as postinterfacial surface-coating adsorbents. Our results demonstrate that this approach effectively achieves the desired PCE limit. Combined with the coadsorbent structure engineering and interface optimization, the device increased the packing area on the TiO2 nanoparticles' surface, reaching an improved PCE of over 13.17% under simulated sunlight (1.5G), which is the highest efficiency of a porphyrin single dye-based DSSC. In particular, this practical approach was also applied to a large-area DSSC with an area of 3 cm2, yielding a remarkable PCE of 9.04%. Furthermore, when applied to a polymer gel electrolyte, this novel approach recorded the highest PCE of 11.16% with a long-term operational stability of up to 1000 h for the quasi-solid-state DSSCs. Our research findings provide a promising avenue for achieving high-performance DSSCs with ease of access and demonstrate practical applications as alternatives to conventional power sources.

Efficient Solar Cells Based on Porphyrin and Concerted Companion Dyes Featuring Benzo 12-Crown-4 for Suppressing Charge Recombination and Enhancing Dye Loading

In recent years, various porphyrin dyes have been designed to develop efficient dye-sensitized solar cells (DSSCs). Based on our previously reported porphyrin dye XW43, which contains a phenothiazine donor with two diethylene glycol (DEG)-derived substituents, we herein report a porphyrin dye XW89 by introducing a benzo 12-crown-4 (BCE) unit onto the N atom of the phenothiazine donor. On this basis, XW90 and XW91 have been synthesized by replacing a DEG chain in XW89 with two DEG chains and a 12-crown-4 unit, respectively. For iodine electrolyte-based DSSCs, dyes XW89-XW91 exhibit VOC values of 765-779 mV, higher than that of XW43 (755 mV), which may be related to the strong capability of the BCE group in binding Li+ and thus suppressing the downward shift of the TiO2 conduction band and interfacial charge recombination. Moreover, the smaller size of 12-crown-4 than the DEG unit enables higher adsorption amounts of the dyes than XW43, contributing to an enhanced JSC value. Due to the presence of two BCE units, dye XW91 exhibits the highest dye loading amount and JSC of 1.86 × 10-7 mol cm-2 and 19.79 mA cm-2, respectively, affording a high PCE of 11.1%. To further enhance the light-harvesting ability, a concerted companion (CC) dye XW92 has been constructed by linking the two subdye units corresponding to the porphyrin dye XW91 and an organic dye. As a result, XW92 affords an enhanced JSC and efficiency. Further coadsorption of XW92 with chenodeoxycholic acid achieved the highest efficiency of 12.1%. This work provides an effective approach for fabricating efficient DSSCs sensitized by porphyrin and CC dyes based on the introduction of crown ether units with smaller sizes and stronger Li+ affinities.