Molecular Engineering of Metal-Organic Frameworks as Efficient Electrochemical Catalysts for Water Oxidation

Thiosalicylic-Acid-Mediated Coordination Structure of Nickel Center via Thermodynamic Modulation for Aqueous Ni-Zn Batteries

Uniquely functional nanocomplexes with rich coordination environments are critical in energy storage. However, the construction of structurally versatile nanocomplexes remains challenging. In this study, a nickel-based complex with structural variations is designed via thermodynamic modulation using a dual-ligand synthesis strategy. A nickel-based nanomaterial (NiSA-SSA-160) with a large specific surface area is synthesized around the competing coordination of the host and guest molecules that differ in terms of the chemical properties of the O and S elements. Concurrently, the coordination environment of NiSA-SSA-160 is investigated via X-ray absorption fine structure spectroscopy. The thiol functional groups synergistically induced an electron-rich Ni structure, thus increasing the electron density of the central atom. The electrochemical performance of an assembled NiSA-SSA-160//Zn@CC battery is shown to improve significantly, with a maximum energy density of 0.54 mWh cm-2 and a peak power density of 49.49 mW cm-2. This study provides a new perspective regarding coordination transformations and offers an idea for the design of functionally rich nanomaterials.

Advancing Energy Sustainability Through Solar-to-Fuel Technologies: From Materials to Devices and Systems

To achieve carbon neutrality and sustainable development, innovative solar-to-fuel systems have been designed through the integration of solar energy harvesting and electrochemical devices. Over the last decade, there have been notable advancements in enhancing the efficiency and durability of these solar-to-fuel systems. Despite the advancements, there remains significant potential for further improvements in the performance of systems. Enhancements can be achieved by optimizing electrochemical catalysts, advancing the manufacturing technologies of photovoltaics and electrochemical cells, and refining the overall design of these systems. In the realm of catalyst optimization, the effectiveness of materials can be significantly improved through active site engineering and strategic use of functional groups. Similarly, the performance of electrochemical devices can be enhanced by incorporating specific additives into electrolytes and optimizing gas diffusion electrodes. Improvements in solar harvesting devices are achievable through efficient passivant and self-assembled monolayers, which enhance the overall quality and efficiency of these systems. Additionally, optimizing the energy conversion efficiency involves the strategic use of DC converters, photoelectrodes, and redox media. This review aims to provide a comprehensive overview of the advancements in solar-powered electrochemical energy conversion systems, laying a solid foundation for future research and development in the field of energy sustainability.

Electrosynthesis of Transition Metal Coordinated Polymers for Active and Stable Oxygen Evolution

Transition metal coordination polymers (TM-CP) are promising inexpensive and flexible electrocatalysts for oxygen evolution reaction in water electrolysis, while their facile synthesis and controllable regulation remain challenging. Here we report an anodic oxidation-electrodeposition strategy for the growth of TM-CP (TM=Fe, Co, Ni, Cr, Mn; CP=polyaniline, polypyrrole) films on a variety of metal substrates that act as both catalyst supports and metal ion sources. An exemplified bimetallic NiFe-polypyrrole (NiFe-PPy) features superior mechanical stability in friction and exhibits high activity with long-term durability in alkaline seawater (over 2000 h) and anion exchange membrane electrolyzer devices at current density of 500 mA cm-2. Spectroscopic and microscopic analysis unravels the configurations with atomically distributed metal sites induced by d-π conjugation, which transforms into a mosaic structure with NiFe (oxy)hydroxides embedded in PPy matrix during oxygen evolution. The superior catalytic performance is ascribed to the anchoring effect of PPy that inhibits metal dissolution, the strong substrate-to-catalyst interaction that ensures good adhesion, and the Fe/Ni-N coordination that modulates the electronic structures to facilitate the deprotonation of *OOH intermediate. This work provides a general strategy and mechanistic insight into building robust inorganic/polymer composite electrodes for oxygen electrocatalysis.

Enhancing Oxygen Evolution Reaction Performance of Metal-Organic Frameworks through Cathode Activation

Due to their abundant active sites and porous structures, metal-organic frameworks (MOFs) have garnered significant interest as oxygen evolution reaction (OER) electrocatalysts. Nevertheless, the development of MOF s-based electrocatalysts with efficient OER activity and excellent stability simultaneously still face challenges. Herein, a cathodic activation strategy was used to enhance the OER electrocatalytic performance of M-HHTP for the first time, where M refers to Ni, Cu, Co, Fe, while HHTP denotes 2, 3, 6, 7, 10, 11-hexahydroxytriphenylene. As a prototype, the activated Ni-HHTP (HA-Ni-HHTP) demonstrates outstanding OER performance, with an overpotential as low as 140 mV at 20 mA cm-2 and a small Tafel slope of 78.7 mV-1, surpassing commercial RuO2 and rivaling state-of-the-art MOFs-based electrocatalysts. Characterizations and density functional theory calculations reveal that the superior performance of HA-Ni-HHTP is primarily ascribed to changes in semiconductor type, contact angle, and oxygen vacancy content induced by cathodic activation. Electrochemical impedance spectroscopy analysis using the transmission line model confirms that cathodic activation accelerates charge transport, enhancing the OER process. Furthermore, the cathodic activation strategy holds promise for improving the water oxidation performance of other MOFs such as Fe-HHTP, Co-HHTP, and Cu-HHTP.

Atomic-level imaging of beam-sensitive COFs and MOFs by low-dose electron microscopy

Electron microscopy, an important technique that allows for the precise determination of structural information with high spatiotemporal resolution, has become indispensable in unravelling the complex relationships between material structure and properties ranging from mesoscale morphology to atomic arrangement. However, beam-sensitive materials, particularly those comprising organic components such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), would suffer catastrophic damage from the high energy electrons, hindering the determination of atomic structures. A low-dose approach has arisen as a possible solution to this problem based on the integration of advancements in several aspects: electron optical system, detector, image processing, and specimen preservation. This article summarizes the transmission electron microscopy characterization of MOFs and COFs, including local structures, host-guest interactions, and interfaces at the atomic level. Revolutions in advanced direct electron detectors, algorithms in image acquisition and processing, and emerging methodology for high quality low-dose imaging are also reviewed. Finally, perspectives on the future development of electron microscopy methodology with the support of computer science are presented.

Defect-engineering improves the activity of Metal-Organic frameworks for catalyzing hydroboration of Alkynes: A combination of experimental investigation and Density functional theory calculations

Defect-engineered metal-organic frameworks (DEMOFs) are emerging advanced materials. The construction of DEMOFs is of great significance; however, DEMOF-based catalysis remains unexplored. (E)-vinylboronates, an important building block for asymmetric synthesis, can be synthesized via the hydroboration of alkynes. However, the lack of high-performance catalysts considerably hinders their synthesis. Herein, a series of DEHKUST-1 (HKUST = Hong Kong University of Science and Technology) (Da-f) catalysts with missing occupation of linkers at Cu nodes were designed by partially replacing benzene-1,3,5-tricarboxylate (H3BTC) with defective connectors of pyridine-3,5-dicarboxylate (PYDC) to efficiently promote the hydroboration of alkynes. Results showed that the Dd containing 0.8 doping ratio of PYDC exhibited remarkable catalytic activity than the defect-free HKUST-1. This originated from the improved accessibility for reactants towards the Lewis acid active Cu sites of DEHKUST-1 due to the presence of plenty of rooms next to the Cu sites and enhanced coordination ability in such 'defective' HKUST-1. Dd had high selectivity (>99 %) and yield (>96 %) for (E)-vinylboronates and extensive functional group compatibility for terminal alkynes. Density functional theory (DFT) calculations were performed to elucidate the mechanism of hydroboration. Compared with that of defect-free HKUST-1, the low energy barrier of DEHKUST-1 can be attributed to the lower coordination number of Cu sites and enhanced accessibility of Cu active sites towards reagents.

In Situ Electrochemical Restructuring B-Doped Metal-Organic Frameworks as Efficient OER Electrocatalysts for Stable Anion Exchange Membrane Water Electrolysis

Metal organic frameworks (MOFs) are promising as effective electrocatalysts toward oxygen evolution reaction (OER). However, the origin of OER activity for MOF-based electrocatalysts is still unclear because of their structure reconstruction during electrocatalysis process. Here, a novel MOF (B-MOF-Zn-Co) with spherical superstructure is developed by hydrothermal treatment of zeolitic imidazolate framework-Zn, Co (ZIF-Zn-Co) using boric acid. The resultant B-MOF-Zn-Co shows high OER activity with a low overpotential of 362 mV at 100 mA cm-2. Remarkably, B-MOF-Zn-Co displays excellent stability with only 3.6% voltage delay over 300 h at 100 mA cm-2 in alkaline electrolyte. Surprisingly, B-MOF-Zn-Co thoroughly transforms into B-doped CoOOH (B-CoOOH) during electrolysis process, which is served as actual active material for high OER electrocatalytic performance. The newly-formed B-CoOOH possesses lower energy barrier of potential-determining step (PDS) for OOH* formation compared with CoOOH, benefiting for high OER activity. More importantly, B-MOF-Zn-Co based anion exchange membrane water electrolytic cell (AEMWE) demonstrates continuously durable operation with stable current density of 200 mA cm-2 over 300 h, illustrating its potential application in practice water electrolysis. This work offers an in situ electrochemical reconstruction strategy for the development of stable and effective OER electrocatalysts toward practice AEMWE.

Real Active Site Identification of Co/Co3O4 Anchoring Ni-MOF Nanosheets with Fast OER Kinetics for Overall Water Splitting

Doping metals and constructing heterostructures are pivotal strategies to enhance the electrocatalytic activity of metal-organic frameworks (MOFs). Nevertheless, effectively designing MOF-based catalysts that incorporate both doping and multiphase interfaces poses a significant challenge. In this study, a one-step Co-doped and Co3O4-modified Ni-MOF catalyst (named Ni NDC-Co/CP) with a thickness of approximately 5.0 nm was synthesized by a solvothermal-assisted etching growth strategy. Studies indicate that the formation of the Co-O-Ni-O-Co bond in Ni NDC-Co/CP was found to facilitate charge density redistribution more effectively than the Co-O-Ni bimetallic synergistic effect in NiCo NDC/CP. The designating Ni NDC-Co/CP achieved superior oxygen evolution reaction (OER) activity (245 mV @ 10 mA cm-2) and robust long stability (100 h @ 100 mA cm-2) in 1.0 M KOH. Furthermore, the Ni NDC-Co/CP(+)||Pt/C/CP(-) displays pregnant overall water splitting performance, achieving a current density of 10 mA cm-2 at an ultralow voltage of 1.52 V, which is significantly lower than that of commercial electrolyzer using Pt/C and IrO2 electrode materials. In situ Raman spectroscopy elucidated the transformation of Ni NDC-Co to Ni(Co)OOH under an electric field. This study introduces a novel approach for the rational design of MOF-based OER electrocatalysts.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Designing Different Heterometallic Organic Frameworks by Heteroatom and Second Metal Doping Strategies for the Electrocatalytic Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) are considered one of the most significant electrocatalysts for the sluggish oxygen evolution reaction (OER). Hence, a series of novel N,S-codoped Ni-based heterometallic organic framework (HMOF) (NiM-bptz-HMOF, M = Co, Zn, and Mn; bptz = 2,5-bis((3-pyridyl)methylthio)thiadiazole) precatalysts are constructed by the heteroatom and second metal doping strategies. The effective combination of the two strategies promotes electronic conductivity and optimizes the electronic structure of the metal. By regulation of the type and proportion of metal ions, the electrochemical performance of the OER can be improved. Among them, the optimized Ni6Zn1-bptz-HMOF precatalyst exhibits the best performance with an overpotential of 268 mV at 10 mA cm-2 and a small Tafel slope of 72.5 mV dec-1. This work presents a novel strategy for the design of modest heteroatom-doped OER catalysts.

Precise Anchoring of Fe Sites by Regulating Crystallinity of Novel Binuclear Ni-MOF for Revealing Mechanism of Electrocatalytic Oxygen Evolution

Bimetallic metal-organic framework (BMOF) exhibits better electrocatalytic performance than mono-MOF, but deciphering the precise anchoring of foreign atoms and revealing the underlying mechanisms at the atomic level remains a major challenge. Herein, a novel binuclear NiFe-MOF with precise anchoring of Fe sites is synthesized. The low-crystallinity (LC)-NiFe0.33 -MOF exhibited abundant unsaturated active sites and demonstrated excellent electrocatalytic oxygen evolution reaction (OER) performance. It achieved an ultralow overpotential of 230 mV at 10 mA cm-2 and a Tafel slope of 41 mV dec-1 . Using a combination of modulating crystallinity, X-ray absorption spectroscopy, and theoretical calculations, the accurate metal sequence of BMOF and the synergistic effect of the active sites are identified, revealing that the adjacent active site plays a significant role in regulating the catalytic performance of the endmost active site. The proposed model of BMOF electrocatalysts facilitates the investigation of efficient OER electrocatalysts and the related catalytic mechanisms.

Ultrathin Fe-MOFs modified by Fe9S10 for highly efficient oxygen evolution reaction

Developing efficient and economical catalysts is essential for water splitting. The application of MOF catalysts in water splitting is limited by poor conductivity; however, the introduction of conductive TMS could enhance their activity. Herein, novel composite Fe9S10/Fe-MOF/NF-2 was constructed by introducing dendritic Fe9S10 onto the surface of a 2D ultrathin Fe-MOF. Composite catalysts elaborately utilize the structural and chemical advantages of MOF and TMS while improving the deficiencies of monomers through the combination. Owing to the optimal structure, the hybrid catalyst Fe9S10/Fe-MOF/NF-2 displayed better catalytic performance than bare Fe-MOFs and Fe9S10, with low overpotentials of 202 and 216 mV at 10 mA cm-2 in alkaline solution and simulated seawater, respectively. This work provides an innovative approach to modify MOFs as electrocatalysts for OER.

Insights on MOF-derived metal-carbon nanostructures for oxygen evolution

Electrochemical water splitting has been regarded a promising method for the production of green hydrogen, addressing the need for efficient energy conversion and storage. However, it is severely hindered by the oxygen evolution reaction (OER) because of its multi-step four-electron transfer pathway with sluggish reaction kinetics. Microporous metal-organic-frameworks (MOFs), by virtue of large specific surface area, high porosity, tunable composition and morphology, find widespread use as precursors of metal-carbon nanostructures. The resulting carbon nanomaterials can well inherit the characteristics and advantages of the crystalline MOF precursors, and exhibit versatile application prospects in the fields of environment and energy, particularly in OER. Herein, a meticulous overview of the synthesis strategy for MOF-derived metal-carbon nanostructures and the origins of their enhanced OER properties has been demonstrated. We comprehensively illustrate these aspects across three dimensions: MOF selection, metal introduction, and carbon structures. Finally, the challenges and future prospects for this emerging field will be presented.

The anticancer application of half-sandwich iridium(III) ferrocene-thiosemicarbazide Schiff base complexes

Ferrocenyl derivatives and organometallic iridium(III) complexes have been prospective substitutes for platinum-based anticancer drugs. Eight half-sandwich iridium(III) ferrocene-thiosemicarbazide (Fc-TSC) Schiff base anticancer complexes were prepared in this study. These complexes displayed a dimeric structure and exhibited a particular fluorescence due to the "enol" orientation of the TSC pro-ligand. An energy-dependent pathway of the uptake mechanism was ascertained, which ended in the lysosome and led to lysosome damage and apoptosis. Flow cytometry confirmed that the complexes could block the cell cycle (G1 phase) and improve the levels of intracellular reactive oxygen species, indicating an anticancer mechanism of oxidation. Then, a lysosomal-mitochondrial anticancer pathway was verified through western blotting. In vivo toxicity assays confirmed that these complexes showed better anti-migration ability and less toxicity in comparison to cisplatin. Thus, these complexes provide a new strategy for the design of non-platinum organometallic anticancer drugs.

Metal-Organic-Framework-Based Nanoarrays for Oxygen Evolution Electrocatalysis

The development of highly active and stable electrode materials for the oxygen evolution reaction (OER) is essential for the widespread application of electrochemical energy conversion systems. In recent years, various metal-organic frameworks (MOFs) with self-supporting array structures have been extensively studied because of their high porosity, abundant metal sites, and flexible and adjustable structures. This review provides an overview of the recent progress in the design, preparation, and applications of MOF-based nanoarrays for the OER, beginning with the introduction of the architectural advantages of the nanoarrays and the characteristics of MOFs. Subsequently, the design principles of robust and efficient MOF-based nanoarrays as OER electrodes are highlighted. Furthermore, detailed discussions focus on the composition, structure, and performance of pristine MOF nanoarrays (MOFNAs) and MOF-based composite nanoarrays. On the one hand, the effects of the two components of MOFs and several modification methods are discussed in detail for MOFNAs. On the other hand, the review emphasizes the use of MOF-based composite nanoarrays composed of MOFs and other nanomaterials, such as oxides, hydroxides, oxyhydroxides, chalcogenides, MOFs, and metal nanoparticles, to guide the rational design of efficient OER electrodes. Finally, perspectives on current challenges, opportunities, and future directions in this research field are provided.

Efficient Solar-Driven Water Splitting Enabled by Perovskite Photovoltaics and a Halogen-Modulated Metal-Organic Framework Electrocatalyst

Solar-driven water splitting powered by photovoltaics enables efficient storage of solar energy in the form of hydrogen fuel. In this work, we demonstrate efficient solar-to-hydrogen conversion using perovskite (PVK) tandem photovoltaics and a halogen-modulated metal-organic framework (MOF) electrocatalyst. By substituting tetrafluoroterephthalate (TFBDC) for terephthalic (BDC) ligands in a nickel-based MOF, we achieve a 152 mV improvement in oxygen evolution reaction (OER) overpotential at 10 mA·cm2. Through X-ray photoelectron spectroscopy (XPS), X-ray adsorption structure (XAS) analysis, theoretical simulation, and electrochemical results, we demonstrated that the introduction of fluorine atoms enhanced the intrinsic activity of Ni sites as well as the transfer property and accessibility of the MOF. Using this electrocatalyst in a bias-free photovoltaic electrochemical (PV-EC) system with a PVK/organic tandem solar cell, we achieve 6.75% solar-to-hydrogen efficiency (ηSTH). We also paired the electrocatalyst with a PVK photovoltaic module to drive water splitting at 206.7 mA with ηSTH of 10.17%.

Molecular Engineering of a Metal-Organic Polymer for Enhanced Electrochemical Nitrate-to-Ammonia Conversion and Zinc Nitrate Batteries

Metal-organic framework-based materials are promising single-site catalysts for electrocatalytic nitrate (NO3 - ) reduction to value-added ammonia (NH3 ) on account of well-defined structures and functional tunability but still lack a molecular-level understanding for designing the high-efficient catalysts. Here, we proposed a molecular engineering strategy to enhance electrochemical NO3 - -to-NH3 conversion by introducing the carbonyl groups into 1,2,4,5-tetraaminobenzene (BTA) based metal-organic polymer to precisely modulate the electronic state of metal centers. Due to the electron-withdrawing properties of the carbonyl group, metal centers can be converted to an electron-deficient state, fascinating the NO3 - adsorption and promoting continuous hydrogenation reactions to produce NH3 . Compared to CuBTA with a low NO3 - -to-NH3 conversion efficiency of 85.1 %, quinone group functionalization endows the resulting copper tetraminobenzoquinone (CuTABQ) distinguished performance with a much higher NH3 FE of 97.7 %. This molecular engineering strategy is also universal, as verified by the improved NO3 - -to-NH3 conversion performance on different metal centers, including Co and Ni. Furthermore, the assembled rechargeable Zn-NO3 - battery based on CuTABQ cathode can deliver a high power density of 12.3 mW cm-2 . This work provides advanced insights into the rational design of metal complex catalysts through the molecular-level regulation for NO3 - electroreduction to value-added NH3 .

MOF-derived S-doped NiCo2O4 hollow cubic nanocage for highly efficient electrocatalytic oxygen evolution

Inducing the surface reconstruction of spinels is critical for improving the electrocatalytic oxygen evolution reaction (OER) activity. Herein, S-doped NiCo2O4 hollow cubic nanocage was synthesized by anion etching Metal-Organic Frameworks (MOFs) template and air annealing strategies. The hollow structure possesses a large specific surface area and pore size, facilitating active site exposure and mass transport. S2- doping regulates the electronic structure, reducing the oxidation potential of Ni sites during the OER process, thus promoting the surface reconstruction into γ-NiOOH active species. Meanwhile, S2- doping enhances conductivity, accelerating interfacial charge transfer. As a result, S-NiCo2O4-6 exhibits superior OER activity (262 mV overpotential @ 10 mA cm-2) and stability in 1.0 M KOH solution. Furthermore, 20 % Pt/C‖S-NiCo2O4-6 only needs 1.832 V to achieve 50 mA (the electrochemical active area is 4 cm2) in a homemade anion exchange membrane (AEM) electrolyzer. This work proposes a novel approach for preparing efficient anion-doped spinel-based OER electrocatalysts.

Redox-active ligands enhance oxygen evolution reaction activity: Regulating the spin state of ferric ions and accelerating electron transfer

Metal-organic frameworks (MOFs) are considered as one of the most promising catalysts for oxygen evolution reaction (OER). However, only a few have introduced redox-active ligands into MOFs and explored their role in the OER process. In this work, we synthesized FeNi DHBQ/NF using the redox-active ligand 2,5-dihydroxy-1,4-benzoquinone (DHBQ), which exhibited excellent redox activity and required only 207 and 242 mV overpotentials to achieve current densities of 10 and 100 mA cm-2. Our research confirms that (i) the doping of Fe leads to the formation of Ni → O → Fe electron transfer channels in the MOFs and stronger electron transfer, attributed to the stronger d-π conjugation between the metal center and the ligand and reduced the d-orbital crystal field splitting energy of Fe3+; (ii) the rate determination step (RDS) in the OER process of the catalyst is the formation of O*, while Fe and redox-active ligands effectively regulate the adsorption energy of oxygen-containing intermediates, reducing the energy barrier of the RDS; (iii) the redox-active ligands can act as "electron reservoirs" in the electrochemical process, making Ni more readily oxidized to Ni3+ or even Ni4+ at low potentials, which is beneficial to the subsequent OER process.

Enlarging the Ni-O Bond Polarizability in a Phosphorene-Hosted Metal-Organic Framework for Boosted Water Oxidation Electrocatalysis

The emerging lattice-oxygen oxidation mechanism (LOM) presents attractive opportunities for breaking the scaling relationship to boost oxygen evolution reaction (OER) with the direct OLattice-*O interaction. However, currently the LOM-triggering rationales are still debated, and a streamlined physicochemical paradigm is extremely desirable for the design of LOM-defined OER catalysts. Herein, a Ni metal-organic framework/black phosphorene (NiMOF/BP) heterostructure is theoretically profiled and constructed as a catalytic platform for the LOM-derived OER studies. It is found that the p-type BP host can enlarge the Ni-O bond polarizability of NiMOF through the Ni-O bond stretching and Ni valence declining synergically. Such an enlarged bond polarizability will in principle alleviate the lattice oxygen confinement to benefit the LOM pathway and OER performance. As a result, the optimized NiMOF/BP catalyst exhibits promising OER performance with a low overpotential of 260 mV at 10 mA cm-2 and long-term stability in 1 M KOH electrolyte. Both experiment and calculation results suggest the activated LOM pathway with a more balanced step barrier in the NiMOF/BP OER catalyst. This research puts forward Ni-O bond polarizability as the criterion to design LOM-scaled electrocatalysts for water oxidation.

Tailoring Metal-Organic Frameworks and Derived Materials for High-Performance Zinc-Air and Alkaline Batteries

Developing multifunctional materials from earth-abundant elements is urgently needed to satisfy the demand for sustainable energy. Herein, we demonstrate a facile approach for the preparation of a metal-organic framework (MOF)-derived Fe₂O₃/C, composited with N-doped reduced graphene oxide (MO-rGO). MO-rGO exhibits excellent bifunctional electrocatalytic activities toward the oxygen evolution reaction (η_j=10 = 273 mV) and the oxygen reduction reaction (half-wave potential = 0.77 V vs reversible hydrogen electrode) with a low ΔE_OER-ORR of 0.88 V in alkaline solutions. A Zn-air battery based on the MO-rGO cathode displays a high specific energy of over 903 W h kg_Zn^-1 (∼290 mW h cm^-2), an excellent power density of 148 mW cm^-2, and an open-circuit voltage of 1.430 V, outperforming the benchmark Pt/C + RuO₂ catalyst. We also hydrothermally synthesized a Ni-MOF that was partially transformed into a Ni-Co-layered double hydroxide (MOF-LDH). A MO-rGO||MOF-LDH alkaline battery exhibits a specific energy of 42.6 W h kg_total mass^-1 (106.5 μW h cm^-2) and an outstanding specific power of 9.8 kW kg_total mass^-1 (24.5 mW cm^-2). This work demonstrates the potential of MOFs and MOF-derived compounds for designing innovative multifunctional materials for catalysis, electrochemical energy storage, and beyond.