Iron Nitrate/TEMPO: a Superior Homogeneous Catalyst for Oxidation of Primary Alcohols to Nitriles in Air

Mechanochemistry Drives Alkene Difunctionalization via Radical Ligand Transfer and Electron Catalysis

A general and modular protocol is reported for olefin difunctionalization through mechanochemistry, facilitated by cooperative radical ligand transfer (RLT) and electron catalysis. Utilizing mechanochemical force and catalytic amounts of 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO), ferric nitrate can leverage nitryl radicals, transfer nitrooxy-functional group via RLT, and mediate an electron catalysis cycle under room temperature. A diverse range of activated and unactivated alkenes exhibited chemo- and regioselective 1,2-nitronitrooxylation under solvent-free or solvent-less conditions, showcasing excellent functional group tolerance. Mechanistic studies indicated a significant impact of mechanochemistry and highlighted the radical nature of this nitrative difunctionalization process.

Low-temperature redox activity and alcohol ammoxidation performance on Cu- and Ru-incorporated ceria catalysts

Transition-metal-incorporated cerium oxides with Cu and a small amount of Ru (Cu0.18Ru0.05CeOz) were prepared, and their low-temperature redox performance (<423 K) and catalytic alcohol ammoxidation performance were investigated. Temperature-programmed reduction/oxidation under H2/O2 and in situ X-ray absorption fine structure revealed the reversible redox behavior of the three metals, Cu, Ru, and Ce, in the low-temperature redox processes. The initially reduced Ru species decreased the reduction temperature of Cu oxides and promoted the activation of Ce species. Cu0.18Ru0.05CeOz selectively catalyzed the production of benzonitrile in the ammoxidation of benzyl alcohol. H2-treated Cu0.18Ru0.05CeOz showed a slightly larger initial conversion of benzyl alcohol than O2-treated Cu0.18Ru0.05CeOz, suggesting that the reduced structure of Cu0.18Ru0.05CeOz was active for the ammoxidation. The integration of both Cu and Ru resulted in the efficient promotion of ammoxidation, in which the Ru species were involved in the conversion of benzyl alcohol and Cu species were required for selective production of benzonitrile.

Organic Synthesis Using Nitroxides

Nitroxides, also known as nitroxyl radicals, are long-lived or stable radicals with the general structure R1R2N-O•. The spin distribution over the nitroxide N and O atoms contributes to the thermodynamic stability of these radicals. The presence of bulky N-substituents R1 and R2 prevents nitroxide radical dimerization, ensuring their kinetic stability. Despite their reactivity toward various transient C radicals, some nitroxides can be easily stored under air at room temperature. Furthermore, nitroxides can be oxidized to oxoammonium salts (R1R2N═O+) or reduced to anions (R1R2N-O-), enabling them to act as valuable oxidants or reductants depending on their oxidation state. Therefore, they exhibit interesting reactivity across all three oxidation states. Due to these fascinating properties, nitroxides find extensive applications in diverse fields such as biochemistry, medicinal chemistry, materials science, and organic synthesis. This review focuses on the versatile applications of nitroxides in organic synthesis. For their use in other important fields, we will refer to several review articles. The introductory part provides a brief overview of the history of nitroxide chemistry. Subsequently, the key methods for preparing nitroxides are discussed, followed by an examination of their structural diversity and physical properties. The main portion of this review is dedicated to oxidation reactions, wherein parent nitroxides or their corresponding oxoammonium salts serve as active species. It will be demonstrated that various functional groups (such as alcohols, amines, enolates, and alkanes among others) can be efficiently oxidized. These oxidations can be carried out using nitroxides as catalysts in combination with various stoichiometric terminal oxidants. By reducing nitroxides to their corresponding anions, they become effective reducing reagents with intriguing applications in organic synthesis. Nitroxides possess the ability to selectively react with transient radicals, making them useful for terminating radical cascade reactions by forming alkoxyamines. Depending on their structure, alkoxyamines exhibit weak C-O bonds, allowing for the thermal generation of C radicals through reversible C-O bond cleavage. Such thermally generated C radicals can participate in various radical transformations, as discussed toward the end of this review. Furthermore, the application of this strategy in natural product synthesis will be presented.

Adjustment of W-O-Zr Boundaries Boosts Efficient Nitrilation of Dimethyl Adipate with Ammonia on WOx/ZrO2 Catalysts

In this study, a tungstated zirconia (WO_x/ZrO₂) catalyst was developed for the continuous synthesis of adiponitrile (ADN) by gas-phase nitrilation of dimethyl adipate (DMA) with NH₃. The highest TOF_ADN could be reached on WO_x/ZrO₂ bearing ∼1D WO_x species (highly dispersed and discontinuous status) at the surface, which, however, delivered the poorest selectivity toward nitrilation (S_ADN+MCP). In comparison, both efficient and selective transformation of DMA to ADN was achieved by fabricating WO_x/ZrO₂ with continuously distributed oligomeric WO_x species (∼2D) at the surface, either by varying the dosage of the W-reagent in the preparation of WO_x(m)/ZrO₂ or by doping a proper amount of the Mn element into WO_x(5.0)/ZrO₂, bearing WO₃ NPs. Furthermore, the in situ diffuse reflectance infrared Fourier transform spectroscopy investigations of both independent and competitive adsorptions of ester functionality and NH₃ over W-O-Zr, W-O-W, and Zr-O-Zr boundaries at the surface clarified the synergistic effect of these species in the activation of DMA/NH₃ and thereby nitrilation.

Selective Iron Catalyzed Synthesis of N-Alkylated Indolines and Indoles

Whereas iron catalysts usually promote catalyzed C3-alkylation of indole derivatives via a borrowing-hydrogen methodology using alcohols as the electrophilic partners, this contribution shows how to switch the selectivity towards N-alkylation. Thus, starting from indoline derivatives, N-alkylation was efficiently performed using a tricarbonyl(cyclopentadienone) iron complex as the catalyst in trifluoroethanol in the presence of alcohols leading to the corresponding N-alkylated indoline derivatives in 31-99 % yields (28 examples). The one-pot, two-step strategy for the selective N-alkylation of indolines is completed by an oxidation to give the corresponding N-alkylated indoles in 31-90 % yields (15 examples). This unprecedented oxidation methodology involves an iron salt catalyst associated with (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) and a stoichiometric amount of t-BuOOH at room temperature.

Efficient iron single-atom catalysts for selective ammoxidation of alcohols to nitriles

Zeolitic imidazolate frameworks derived Fe₁-N-C catalysts with isolated single iron atoms have been synthesized and applied for selective ammoxidation reactions. For the preparation of the different Fe-based materials, benzylamine as an additive proved to be essential to tune the morphology and size of ZIFs resulting in uniform and smaller particles, which allow stable atomically dispersed Fe-N₄ active sites. The optimal catalyst Fe₁-N-C achieves an efficient synthesis of various aryl, heterocyclic, allylic, and aliphatic nitriles from alcohols in water under very mild conditions. With its chemoselectivity, recyclability, high efficiency under mild conditions this new system complements the toolbox of catalysts for nitrile synthesis, which are important intermediates with many applications in life sciences and industry.

Vanadium-catalyzed Oxidative Conversion of Primary Aromatic Alcohols into Amides and Nitriles with Molecular Oxygen

Amides or nitriles are important building blocks because of the widespread occurrence in chemistry and biology. The development of green and efficient catalytic approaches to introduce nitrogen functionality is highly desired. Herein a vanadium-based material V-N-C-700 was prepared via a simple and convenient method, and employed for liquid-phase catalytic ammoxidation of alcohols with molecular oxygen. By using V-N-C-700/2-picolinic acid, primary aromatic alcohols was smoothly converted into the amides and nitriles in the presence of urea. The corresponding aldehydes are the key intermediates, and 2-picolinic acid could significantly enhance oxidation of alcohols into aldehydes. The amides were formed simultaneously along with nitriles, rather than only from nitriles via successive hydration. This work further expands non-noble metal catalysts for the preparation of amides and nitriles.

Synthesis of adiponitrile from dimethyl adipate and ammonia in the vapor-phase over niobium oxide

An environmentally benign route leading to adiponitrile (ADN), a nylon-6,6 intermediate, was achieved by direct vapor-phase nitrilation of dimethyl adipate (DMA) with ammonia (NH3) in a fixed-bed reactor.

Revealing the Structure of Transition Metal Complexes of Formaldoxime

Aerobic reactions of iron(III), nickel(II), and manganese(II) chlorides with formaldoxime cyclotrimer (tfoH₃) and 1,4,7-triazacyclononane (tacn) produce indefinitely stable complexes of general formula [M(tacn)(tfo)]Cl. Although the formation of formaldoxime complexes has been known since the end of 19th century and applied in spectrophotometric determination of d-metals (formaldoxime method), the structure of these coordination compounds remained elusive until now. According to the X-ray analysis, [M(tacn)(tfo)]⁺ cation has a distorted adamantane-like structure with the metal ion being coordinated by three oxygen atoms of deprotonated tfoH₃ ligand. The metal has a formal +4 oxidation state, which is atypical for organic complexes of iron and nickel. Electronic structure of [M(tacn)(tfo)]⁺ cations was studied by XPS, NMR, cyclic (CV) and differential pulse (DPV) voltammetries, Mössbauer spectroscopy, and DFT calculations. Unusual stabilization of high-valent metal ion by tfo^3- ligand was explained by the donation of electron density from the nitrogen atom to the antibonding orbital of the metal-oxygen bond via hyperconjugation as confirmed by the NBO analysis. All complexes [M(tacn)(tfo)]Cl exhibited high catalytic activity in the aerobic dehydrogenative dimerization of p-thiocresol under ambient conditions.

Iron-Catalyzed α,β-Dehydrogenation of Carbonyl Compounds

An iron-catalyzed α,β-dehydrogenation of carbonyl compounds was developed. A broad spectrum of carbonyls or analogues, such as aldehyde, ketone, lactone, lactam, amine, and alcohol, could be converted to their α,β-unsaturated counterparts in a simple one-step reaction with high yields.

The ammoxidation of alcohols over heterogeneous catalysts for the green synthesis of nitriles

This is the first review on the ammoxidation of alcohols over heterogeneous catalysts, in which issues and potential solutions are demonstrated.

A combined experimental and computational study of NHC-promoted desulfonylation of tosylated aldimines

NHC-catalyzed mild desulfonylation of tosylated aldimines provides efficient access to aryl nitriles with broad substrate scope. DFT calculations demonstrate that the reaction undergoes multiple stepwise processes.

Copper-catalyzed tandem oxidative synthesis of quinazolinones from 2-aminobenzonitriles and benzyl alcohols

A highly efficient, one-pot Cu(OAc)₂/Cs₂CO₃-catalyzed protocol for the aerobic oxidative synthesis of quinazolinones from readily available benzyl alcohols and 2-aminobenzonitriles with molecular oxygen as the terminal oxidant has been successfully developed.

Biocatalytic production of adiponitrile and related aliphatic linear α,ω-dinitriles

Linear α,ω-dinitriles are important precursors for the polymer industry. Most prominently, adiponitrile is produced on an annual scale of ca. 1 million tons. However, a drawback of today’s dominating process is the need for large amounts of highly toxic hydrogen cyanide. In this contribution, an alternative approach towards such linear dinitriles is presented based on dehydration of readily available α,ω-dialdoximes at ambient conditions by means of aldoxime dehydratases. In contrast to existing production routes this biocatalytic route enables a highly regio- and chemoselective approach towards dinitriles without the use of hydrogen cyanide or harsh reaction conditions. In addition, a selective synthesis of adiponitrile with substrate loadings of up to 100 g/L and high yields of up to 80% was achieved. Furthermore, a lab scale process on liter scale leading to > 99% conversion at 50 g/L underlines the potential and robustness of this method for technical applicability.

Typically, preparation of the polymer precursors α,ω-dinitriles requires hydrogen cyanide. Here, the authors use aldoxime hydratase to produce adiponitrile and related aliphatic linear dinitriles under ambient conditions starting from readily available substrates without needing hydrogen cyanide.

Catalytic Promiscuity of Galactose Oxidase: A Mild Synthesis of Nitriles from Alcohols, Air, and Ammonia

We report an unprecedented catalytically promiscuous activity of the copper-dependent enzyme galactose oxidase. The enzyme catalyses the one-pot conversion of alcohols into the related nitriles under mild reaction conditions in ammonium buffer, consuming ammonia as the source of nitrogen and dioxygen (from air at atmospheric pressure) as the only oxidant. Thus, this green method does not require either cyanide salts, toxic metals, or undesired oxidants in stoichiometric amounts. The substrate scope of the reaction includes benzyl and cinnamyl alcohols as well as 4- and 3-pyridylmethanol, giving access to valuable chemical compounds. The oxidation proceeds through oxidation from alcohol to aldehyde, in situ imine formation, and final direct oxidation to nitrile.

Platinum-Based Heterogeneous Catalysts for Nitrile Synthesis via Aerobic Oxidative Coupling of Alcohols and Ammonia

Transition-metal-catalyzed aerobic oxidative coupling of alcohols and ammonia represents an attractive atom-economical synthetic route to prepare nitriles. Heterogeneous platinum catalysts have been widely used for aerobic alcohol oxidation to aldehydes and carboxylic acids but have not been applied to nitrile synthesis. In this work, we show that carbon-supported Pt catalysts are effective for this transformation. Unpromoted Pt is competent with benzylic substrates bearing either electron-donating or electron-withdrawing substituents. Use of both K₂CO₃ and Bi additives accelerates the rate of alcohol oxidation and affords high yields with challenging heterocyclic alcohols.

Cu(OAc)2 /TEMPO Cooperative Promoted Hydroamination Cyclization and Oxidative Dehydrogenation Cascade Reaction of Homopropargylic Amines

A novel and efficient Cu(OAc)₂ -catalyzed hydroamination cyclization and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidative dehydrogenation cascade reaction of homopropargylic amines has been developed. A library of 1,2-disubstituted pyrrole derivatives were obtained in good-to-high yields in one pot with no step-by-step feeding process. This reaction involved TEMPO playing dual roles as both an oxidative dehydrogenation reagent and a ligand. An insight into the reaction mechanism was obtained by using several analytical determination methods.

Metal-free catalysis of nitrogen-doped nanocarbons for the ammoxidation of alcohols to nitriles

Mesoporous N-doped nanocarbons were developed via pyrolysis of DAA using template synthesis and showed good activity to ammoxidation of alcohols.

Redox reaction between benzyl azides and aryl azides: concerted synthesis of aryl nitriles and anilines

A unique and novel reaction between benzyl azides and aryl azides is described to synthesize aryl nitriles and anilines concurrently, which is catalyzed with a photoactivated diruthenium complex.

A practical iodine-catalyzed oxidative conversion of aldehydes to nitriles

A simple and efficient method for the direct synthesis of nitriles from aldehydes using ammonium acetate as the nitrogen source, iodine as the catalyst, and tert-butyl hydroperoxide (TBHP) as the oxidant was developed.

High catalytic activity of mesoporous Co–N/C catalysts for aerobic oxidative synthesis of nitriles

We report the synthesis and assessment of novel mesoporous cobalt-coordinated nitrogen-doped carbon catalysts (meso-Co–N/C) for highly efficient synthesis of nitriles.

Iron nitrate/TEMPO-catalyzed aerobic oxidative synthesis of quinazolinones from alcohols and 2-aminobenzamides with air as the oxidant

A highly efficient, one-pot Fe(NO₃)₃/TEMPO-catalyzed protocol for aerobic oxidative synthesis of quinazolinones from easily accessible primary alcohols and 2-aminobenzamides with molecular oxygen as the terminal oxidant.