Size Sensitivity of Metabolite Diffusion in Macromolecular Crowds

Metabolites play crucial roles in cellular processes, yet their diffusion in the densely packed interiors of cells remains poorly understood, compounded by conflicting reports in existing studies. Here, we employ pulsed-gradient stimulated-echo NMR and Brownian/Stokesian dynamics simulations to elucidate the behavior of nano- and subnanometer-sized tracers in crowded environments. Using Ficoll as a crowder, we observe a linear decrease in tracer diffusivity with increasing occupied volume fraction, persisting─somewhat surprisingly─up to volume fractions of 30-40%. While simulations suggest a linear correlation between diffusivity slowdown and particle size, experimental findings hint at a more intricate relationship, possibly influenced by Ficoll's porosity. Simulations and numerical calculations of tracer diffusivity in the E. coli cytoplasm show a nonlinear yet monotonic diffusion slowdown with particle size. We discuss our results in the context of nanoviscosity and discrepancies with existing studies.

Anionic species from multivalent metal salts are differentially retained during aqueous ionic gelation of sodium alginate and could fine-tune the hydrogel properties

The role of anionic counterions of divalent metal salts in alginate gelation and hydrogel properties has been thoroughly investigated. Three anions were selected from the Hofmeister series, namely sulphate, acetate and chloride, paired in all permutations and combinations with divalent metal cations like calcium, zinc and copper. Spectroscopic analysis revealed the presence of anions and their interaction with the respective metal cations in the hydrogel. The data showed that the gelation time and other hydrogel properties were largely controlled by cations. However, subtle yet significant variations in viscoelasticity, water uptake, drug release and cytocompatibility properties were anion dependent in each cationic group. Computational modelling based study showed that metal-anion-alginate configurations were energetically more stable than the metal-alginate models. The in vitro and in silico studies concluded that acetate anions preceded chlorides in the drug release, swelling and cytocompatibility fronts, followed by sulphate anions in each cationic group. Overall, the data confirmed that anions are an integral part of the metal-alginate complex. Furthermore, anions offer a novel option to further fine-tune the properties of alginate hydrogels for myriads of applications. In addition, full exploration of this novel avenue would enhance the usability of alginate polymers in the pharmaceutical, environmental, biomedical and food industries.

Conception of pH-sensitive calcium alginate/poly vinyl alcohol hydrogel beads for controlled oral curcumin delivery systems. Antibacterial and antioxidant properties

Curcumin, a bioactive compound derived from the rhizome of Curcuma longa, has gained widespread attention for its potential therapeutic properties, including anti-inflammatory, antioxidant and anticancer effects. However, its poor aqueous solubility, instability and limited bioavailability have hindered its clinical applications. New beads formulations based on sodium alginate biopolymer (SA) and poly vinyl alcohol (PVA) were successfully prepared and evaluated as a potential drug vehicle for extended release of curcumin (Cur). Pristine and curcumin loaded calcium alginate/poly vinyl alcohol beads (CA/PVA and CA/PVA/Cur) at different compositions of SA and PVA were prepared by an ionotropic gelation method of SA followed by two freeze-thawing (FT) cycles for further crosslinking of PVA. Characterization techniques, such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), UV-Visible spectroscopy, thermogravimetric analysis (TGA) and x-ray diffraction (XRD) were used to confirm the successful microencapsulation of curcumin within the CA/PVA microcapsules. Furthermore, the swelling of pristine beads, pH-sensitive properties and in vitro release studies of curcumin loaded beads were investigated at 37 °C in simulated gastric fluid (SGF), simulated intestinal fluid (SIF) and simulated colonic fluid (SCF). The effect of the polymer blend ratio, the encapsulation efficiency (EE %) of curcumin, the loading capacity (LC μg/mg), the sphericity factor (SF), the antioxidant activity of the elaborated beads and their antimicrobial properties against bacteria and fungi were just as much evaluated. The obtained results indicate that the swelling and the behavior of the developed beads were influenced by the pH of the test medium and the PVA content. The introduction of PVA into the SA matrix greatly enhanced the physicochemical properties, the encapsulation efficiency and the loading capacity of the elaborated microparticles. Results also suggested that the antioxidant activity of the loaded beads (CA/PVA/Cur) showed a higher DPPH radical scavenging activity while the bacterial and fungal strains proved sensitive to the different formulations used in the assay. Moreover, the important drug encapsulation efficiency and the sustainable drug release of these materials make them promising for the development of new drug carrier systems for colon targeting.

Colloidal Engineering of Microplastic Capture with Biodegradable Soft Dendritic "Microcleaners"

The introduction of colloidal principles that enable efficient microplastic collection from aquatic environments is a goal of great environmental importance. Here, we present a novel method of microplastic (MP) collection using biodegradable hydrogel soft dendritic colloids (hSDCs). These dendritic colloids have abundant nanofibrils and a large surface area, which provide an abundance of interfacial interactions and excellent networking capabilities, allowing for the capture of plastic particles and other contaminants. Here, we show how the polymer composition and morphology of the hSDCs can impact the capture of microplastics modeled by latex microbeads. Additionally, we use colloidal DLVO theory to interpret the capture efficiencies of microbeads of different sizes and surface functional groups. The results demonstrate the microplastic remediation efficiency of hydrogel dendricolloids and highlight the primary factors involved in the microbead interactions and adsorption. On a practical level, the results show that the development of environmentally benign microcleaners based on naturally sourced materials could present a sustainable solution for microplastic cleanup.

Alginate coated biogenic silver nanoparticles for the treatment of Pseudomonas infections in rainbow trout

Pseudomonas species are among the main pathogens causing rainbow trout infections. The present study provides a simple, green, sustainable, and rapid technique to synthesize of biogenic alginate-capped silver nanoparticles (Alg-Ag NPs) suitable for the treatment of Pseudomonas infections. It has been shown that the mechanism (aggregative or autocatalytic) of Alg-Ag NPs formation depended on Alg concentration and the heating approach used. The rate constants and activation energy were calculated. Alg-Ag NPs were characterized by UV-Vis, FTIR, XRD, TEM, AFM, XPS, and DLS. The optimal conditions for the fabrication of spherically-shaped (17-19 nm) and negatively-charged (zeta-potential <-50 mV) Alg-Ag NPs, which are stable during 9 months, included hot-plate assisted synthesis at 100 °C in diluted (1 mg/mL) Alg solutions. In vitro studies showed that Alg-Ag NPs exhibited prominent antimicrobial activity against collection Pseudomonas strains (inhibition zones ranged from 9.0 ± 1.0 to 19.0 ± 1.0 mm), with no significant loss of antibacterial efficacy after 9 months of storage. AFM analysis confirmed that the antibacterial effect of Alg-Ag NPs dealt with the direct nanomechanical disrupting of bacterial cells. The ability of Alg-Ag NPs to inhibit the growth of virulent P.aeruginosa, P.fluorescens and P. putida strains isolated from infected rainbow trout was evaluated. All tested strains were susceptible to Alg(10)-Ag NPs, while Alg(1)-Ag NPs demonstrated a limited strain-specific antibacterial effect. The obtained data displayed the prospects for the application of biogenic Alg-Ag NPs to create novel delivery systems for combating Pseudomonas infections in rainbow trout.

Zinc nanoparticles encapsulated in porous biopolymer beads for reduction of water pollutants and antimicrobial activity

This work focuses on the preparation of composite beads from alginate crosslinked with copper at several loading percent and also loaded with ZnNPs. Th obtained samples were applied as catalysts for the reduction of the organic polluants 4-NP, MB, OG, MO, and CR in simple and binary systems. XRD results and TEM images confirmed the presence of ZnNPs in the polymer matrix. XRF and TGA analysis showed that the percentage of the cross-linking agent significantly influences the content of ZnNPs as well as the thermal stability of the resulting material. The catalytic activity of the composite beads showed that the Cu(4 %)-ALG(ZnNPs) sample was the best catalyst for all pollutants. In the simple system, the recorded rate constants for MB, MO, 4-NP, OG, and CR were 0.0133 s-1, 0.0076 s-1, 0.005 s-1, 0.0042 s-1, 0.0036 s-1, respectively. The catalyst was more selective towards the cationic MB dye for binary systems. For antibacterial and antifungal applications, the different materials containing ZnNPs and their counterparts containing Zn2+ were found to be active across all bacterial strains (Gram positive and Gram negative) as well as fungi, and the Zn2+-containing composites in particular performed better across all bacteria and fungi.

Chitosan and HPMCAS double-coating as protective systems for alginate microparticles loaded with Ctx(Ile21)-Ha antimicrobial peptide to prevent intestinal infections

The incorrect use of conventional drugs for both prevention and control of intestinal infections has contributed to a significant spread of bacterial resistance. In this way, studies that promote their replacement are a priority. In the last decade, the use of antimicrobial peptides (AMP), especially Ctx(Ile²¹)-Ha AMP, has gained strength, demonstrating efficient antimicrobial activity (AA) against pathogens, including multidrug-resistant bacteria. However, gastrointestinal degradation does not allow its direct oral application. In this research, double-coating systems using alginate microparticles loaded with Ctx(Ile²¹)-Ha peptide were designed, and in vitro release assays simulating the gastrointestinal tract were evaluated. Also, the AA against Salmonella spp. and Escherichia coli was examined. The results showed the physicochemical stability of Ctx(Ile²¹)-Ha peptide in the system and its potent antimicrobial activity. In addition, the combination of HPMCAS and chitosan as a gastric protection system can be promising for peptide carriers or other low pH-sensitive molecules, adequately released in the intestine. In conclusion, the coated systems employed in this study can improve the formulation of new foods or biopharmaceutical products for specific application against intestinal pathogens in animal production or, possibly, in the near future, in human health.

Film-Forming Polymers for Tooth Erosion Prevention

Different agents have been proposed to prevent the progression of acid induced dental substance losses, which are called erosive tooth wear (ETW), such as fluorides, calcium, and phosphate-based products; however, there is a need for a further increase in efficacy. Recently, the ability of polymers to interact with the tooth surface, forming acid resistant films, has come into the focus of research; nevertheless, there is still the need for a better understanding of their mode of action. Thus, this article provides an overview of the chemical structure of polymers, their mode of action, as well as the effect of their incorporation into oral care products, acid beverages, and antacid formulations, targeting the prevention of ETW. Recent evidence indicates that this may be a promising approach, however, additional studies are needed to confirm their efficacy under more relevant clinical conditions that consider salivary parameters such as flow rate, composition, and clearance. The standardization of methodological procedures such as acid challenge, treatment duration, and combination with fluorides is necessary to allow further comparisons between studies. In conclusion, film-forming polymers may be a promising cost-effective approach to prevent and control erosive demineralization of the dental hard tissue.

Effect of chest physiotherapy on cystic fibrosis sputum nanostructure: an experimental and theoretical approach

Cystic fibrosis (CF) is a disease characterized by the production of viscous mucoid secretions in multiple organs, particularly the airways. The pathological increase of proteins, mucin and biological polymers determines their arrangement into a three-dimensional polymeric network, affecting the whole mucus and impairing the muco-ciliary clearance which promotes inflammation and bacterial infection. Thus, to improve the efficacy of the drugs usually applied in CF therapy (e.g., mucolytics, anti-inflammatory and antibiotics), an in-depth understanding of the mucus nanostructure is of utmost importance. Drug diffusivity inside a gel-like system depends on the ratio between the diffusing drug molecule radius and the mesh size of the network. Based on our previous findings, we propose the combined use of rheology and low field NMR to study the mesh size distribution of the sputum from CF patients. Specifically, we herein explore the effects of chest physiotherapy on CF sputum characteristic as evaluated by rheology, low field NMR and the drug penetration through the mucus via mathematical simulation. These data show that chest physiotherapy has beneficial effects on patients, as it favourably modifies sputum and enhances drug penetration through the respiratory mucus.

Alginate Nanohydrogels as a Biocompatible Platform for the Controlled Release of a Hydrophilic Herbicide

The large-scale application of volatile and highly water-soluble pesticides to guarantee crop production can often have negative impacts on the environment. The main loss pathways are vapor drift, direct volatilization, or leaching of the active substances. Consequently, the pesticide can either accumulate and/or undergo physicochemical transformations in the soil. In this scenario, we synthesized alginate nanoparticles using an inverse miniemulsion template in sunflower oil and successfully used them to encapsulate a hydrophilic herbicide, i.e., dicamba. The formulation and process conditions were adjusted to obtain a unimodal size distribution of nanohydrogels of about 20 nm. The loading of the nanoparticles with dicamba did not affect the nanohydrogel size nor the particle stability. The release of dicamba from the nanohydrogels was also tested: the alginate nanoparticles promoted the sustained and prolonged release of dicamba over ten days, demonstrating the potential of our preparation method to be employed for field application. The encapsulation of hydrophilic compounds inside our alginate nanoparticles could enable a more efficient use of pesticides, minimizing losses and thus environmental spreading. The use of biocompatible materials (alginate, sunflower oil) also guarantees the absence of toxic additives in the formulation.

Protective Effect of Solutions Containing Polymers Associated with Fluoride and Stannous Chloride on Hydroxyapatite Dissolution

This study investigated the protective effect of experimental solutions containing 4 polymers (polyoxirane, hydroxypropylmethylcellulose [HPMC], pectin, and an amino methacrylate copolymer [AMC]) in 2 concentrations (low and high) associated or not with sodium fluoride (F; 225 ppm F-) or sodium fluoride plus stannous chloride (FS; 800 ppm Sn2+) on the dissolution of hydroxyapatite crystals (HA). Deionized water was the control. The pretreated HA was added to a 0.3% citric acid solution (pH 3.8). An automatic titrant machine added aliquots of 0.1 N HCl at a rate of 28 μL/min, in a total reaction time of 5 min. Groups were compared with 2-way ANOVA and Tukey's test, and concentrations with Student t test (5%). The zeta potential of the HA treated with the solutions was measured. Significant differences were found for both factors and interaction (p < 0.0001). The treatments with F and FS solutions resulted in a lower amount of dissolved HA than the control. Among the polymers' solutions, only AMC was able to reduce the amount of dissolved HA, changing the surface charge of HA to positive. AMC improved the protective effect of F, but it did not affect FS. Polyoxirane and HPMC reduced the protective potential of the FS solution. No differences were found between the concentrations of the polymers. It was concluded that F and FS reduced the amount of dissolved HA. The protective effect of the experimental solutions against HA dissolution was polymer dependent. The F effect was enhanced by its combination with AMC, but the protection of FS was impaired by polyoxirane and HPMC.

Biofabrication of Hepatic Constructs by 3D Bioprinting of a Cell-Laden Thermogel: An Effective Tool to Assess Drug-Induced Hepatotoxic Response

A thermoresponsive Pluronic/alginate semisynthetic hydrogel is used to bioprint 3D hepatic constructs, with the aim to investigate liver-specific metabolic activity of the 3D constructs compared to traditional 2D adherent cultures. The bioprinting method relies on a bioinert hydrogel and is characterized by high-shape fidelity, mild depositing conditions and easily controllable gelation mechanism. Furthermore, the dissolution of the sacrificial Pluronic templating agent significantly ameliorates the diffusive properties of the printed hydrogel. The present findings demonstrate high viability and liver-specific metabolic activity, as assessed by synthesis of urea, albumin, and expression levels of the detoxifying CYP1A2 enzyme of cells embedded in the 3D hydrogel system. A markedly increased sensitivity to a well-known hepatotoxic drug (acetaminophen) is observed for cells in 3D constructs compared to 2D cultures. Therefore, the 3D model developed herein may represent an in vitro alternative to animal models for investigating drug-induced hepatotoxicity.

Using the Cahn–Hilliard Theory in Metastable Binary Solutions

A solution may be in one of three states: stable, unstable, or metastable. If the solution is unstable, phase separation is spontaneous and proceeds by spinodal decomposition. If the solution is metastable, the solution must overcome an activation barrier for phase separation to proceed spontaneously. This mechanism is called nucleation and growth. Manipulating morphology using phase separation has been of great research interest because of its practical use to fabricate functional materials. The Cahn–Hilliard theory, incorporating Flory–Huggins free energy, has been used widely and successfully to model phase separation by spinodal decomposition in the unstable region. This model is used in this paper to mathematically model and numerically simulate the phase separation by nucleation and growth in the metastable state for a binary solution. Our numerical results indicate that Cahn–Hilliard theory is able to predict phase separation in the metastable region but in a region near the spinodal line.

Theoretical Importance of PVP-Alginate Hydrogels Structure on Drug Release Kinetics

BACKGROUND

The new concepts of personalized and precision medicine require the design of more and more refined delivery systems. In this frame, hydrogels can play a very important role as they represent the best surrogate of soft living tissues for what concerns rheological properties. Thus, this paper focusses on a global theoretical approach able to describe how hydrogel polymeric networks can affect the release kinetics of drugs characterized by different sizes. The attention is focused on a case study dealing with an interpenetrated hydrogel made up by alginate and poly(N-vinyl-2-pyrrolidone).

METHODS

Information about polymeric network characteristics (mesh size distribution and polymer volume fraction) is deduced from the theoretical interpretation of the rheological and the low field Nuclear Magnetic Resonance (NMR) characterization of hydrogels. This information is then, embodied in the mass balance equation whose resolution provides the release kinetics.

RESULTS

Our simulations indicate the influence of network characteristics on release kinetics. In addition, the reliability of the proposed approach is supported by the comparison of the model outcome with experimental release data.

CONCLUSIONS

This study underlines the necessity of a global theoretical approach in order to design reliable delivery systems based on hydrogels.

Electromagnetic manipulation enabled calcium alginate Janus microsphere for targeted delivery of mesenchymal stem cells

We prepared Janus microspheres based on sodium alginate for the encapsulation of mesenchymal stem cells (MSC) in one compartment and iron oxide nanoparticles (IONP) or a drug in the second compartment. 4% percent sodium alginate solution was allowed to pass through a septum-theta capillary device and react with 2.5% calcium chloride to allow crosslinking to occur in the solution, forming calcium alginate Janus microspheres. Physico-chemical characterization of microspheres was done by FTIR, TGA, and XRD after loading of stem cells and IONP/drug. The mechanical integrity of microspheres was tested at different time points, which showed that 4% alginate microspheres were mechanically stable for a long period of time. Live/dead staining of MSCs alone and the MTS assay of MSCs and DMSO co-loaded were performed, which showed less toxicity to MSC in the Janus configuration. IONP/MSC-loaded Janus microspheres were tested by magnetic manipulation for targeted MSC delivery for cartilage repair using an electromagnetic manipulation (EMM) device. Janus microspheres can be used for targeted stem cell/drug delivery using EMM for cartilage repair in the near future.

HPMC granules by wet granulation process: Effect of vitamin load on physicochemical, mechanical and release properties

Due to its versatile properties, hydroxypropyl methylcellulose (HPMC) is largely used in many applications and deeply studied in the various fields such as pharmaceuticals, biomaterials, agriculture, food, water purification. In this work, vitamin B12 loaded HPMC granules were produced to investigate their potential application as nutraceutical products. To this aim the impact of vitamin load on physico-chemical, mechanical and release properties of granules, achieved by wet granulation process, was investigated. In particular, three different loads of B12 (1%, 2.3% and 5% w/w) were assayed. Unloaded granules (used as control) and loaded granules were dried, sieved, and then the suitable fraction for practical uses, 0.45-2mm in size, was fully characterized. Results showed that the vitamin incorporation of 5% reduced the granulation performance in the range size of 0.45-2mm and led granules with higher porosity, more rigid and less elastic structures compared to unloaded granules and those loaded at 1% and 2.3% of B12. Vitamin release kinetics of fresh and aged granules were roughly found the same trends for all the prepared lots; however, the vitamin B12 was released more slowly when added with a load at 1% w/w, suggesting a better incorporation.

Modeling of the Behavior of Natural Polysaccharides Hydrogels for Bio-pharma Applications

Hydrogels, even if not exclusively obtained from natural sources, are widely used for pharmaceuticals and for biomedical applications. The reasons for their uses are their biocompatibility and the possibility to obtain systems and devices with different properties, due to variable characteristics of the materials. In order to effectively design and produce these systems and devices, two main ways are available: i) trial-and-error process, at least guided by experience, during which the composition of the system and the production steps are changed in order to get the desired behavior; ii) production process guided by the a-priori simulation of the systems’ behavior, thanks to proper tuned mathematical models of the reality. Of course the second approach, when applicable, allows tremendous savings in term of human and instrumental resources.

In this mini-review, several modeling approaches useful to describe the behavior of natural polysaccharide-based hydrogels in bio-pharma applications are reported. In particular, reported case histories are: i) the size calculation of micro-particles obtained by ultrasound assisted atomization; ii) the release kinetics from core-shell micro-particles, iii) the solidification behavior of blends of synthetic and natural polymers for gel paving of blood vessels, iv) the drug release from hydrogel-based tablets. This material can be seen as a guide toward the use of mathematical modeling in bio-pharma applications.

Encapsulation of Active Molecules in Microparticles Based on Natural Polysaccharides

This mini-review is focused on an engineering approach to produce polysaccharides-based microparticles for nutraceutical and pharmaceutical purposes. A brief introduction about the fundamental properties of polysaccharides and their use as microsystems in food, cosmetics, and pharmaceutics, and a summary of the most important methods of preparation are described. Then, a novel method based on the ultrasonic atomization of solutions of the two most used polysaccharides, alginate and chitosan, followed by ionotropic gelation to produce enteric microsystems for oral administration and, in particular, the basic mechanisms of the encapsulation of molecules with different size and hydrophilicity, are investigated. This mini-review will show therefore the pathway to correctly design a polysaccharide microcarrier for the encapsulation of active molecules with different properties: from the choice of materials features, to the selection and the optimization of production methods with the aim to reduce costs and energy (ionotropic gelation coupled to ultrasonic atomization), to the control of the final carrier size (by purposely developed predictive models), at last to the optimization of encapsulation properties (predicting by model the drug leakage and providing different solutions to avoid it).

Production of ultra-high concentration calcium alginate beads with prolonged dissolution profile

Ultra-high concentration (UHC) calcium alginate beads produced by temperature-controlled extrusion-dripping system show prolonged dissolution profile.

Fickian-Based Empirical Approach for Diffusivity Determination in Hollow Alginate-Based Microfibers Using 2D Fluorescence Microscopy and Comparison with Theoretical Predictions

Hollow alginate microfibers (od = 1.3 mm, id = 0.9 mm, th = 400 µm, L = 3.5 cm) comprised of 2% (w/v) medium molecular weight alginate cross-linked with 0.9 M CaCl₂ were fabricated to model outward diffusion capture by 2D fluorescent microscopy. A two-fold comparison of diffusivity determination based on real-time diffusion of Fluorescein isothiocyanate molecular weight (FITC MW) markers was conducted using a proposed Fickian-based approach in conjunction with a previously established numerical model developed based on spectrophotometric data. Computed empirical/numerical (D_empiricial/D_numerical) diffusivities characterized by small standard deviations for the 4-, 70- and 500-kDa markers expressed in m²/s are (1.06 × 10⁻⁹ ± 1.96 × 10⁻¹⁰)/(2.03 × 10⁻¹¹), (5.89 × 10⁻¹¹ ± 2.83 × 10⁻¹²)/(4.6 × 10⁻¹²) and (4.89 × 10⁻¹² ± 3.94 × 10⁻¹³)/(1.27 × 10⁻¹²), respectively, with the discrimination between the computation techniques narrowing down as a function of MW. The use of the numerical approach is recommended for fluorescence-based measurements as the standard computational method for effective diffusivity determination until capture rates (minimum 12 fps for the 4-kDa marker) and the use of linear instead of polynomial interpolating functions to model temporal intensity gradients have been proven to minimize the extent of systematic errors associated with the proposed empirical method.

The influence of different polymers on viability of Bifidobacterium lactis 300b during encapsulation, freeze-drying and storage

Seven different types of natural polymers namely hydroxypropyl methylcellulose (HPMC), sodium-carboxymethyl cellulose (Na-CMC), microcrystalline cellulose (MCC), starch BR-07, starch BR-08, dextrin and pullulan were used in order to develop the optimal formula for the entrapment of Bifidobacterium lactis 300B in Ca-alginate based granules. Laminar flow drip casting with Brace-Encapsulator was used in order to prepare the granules. The results showed that alginate/pullulan and alginate/HPMC formulation provide high protection for the bacterial strain used for encapsulation. These two formulations were further used to obtain freeze dried granules, for which the viability in time and at different temperatures was tested. The final results showed a higher viability than the level of the therapeutic minimum (>10(7) CFU/g) after 15 days of storage. Other parameters like entrapment efficiency, production rate, sphericity, flowability were also discussed.

Ultrasonic energy in liposome production: process modelling and size calculation

The use of liposomes in several fields of biotechnology, as well as in pharmaceutical and food sciences is continuously increasing. Liposomes can be used as carriers for drugs and other active molecules. Among other characteristics, one of the main features relevant to their target applications is the liposome size. The size of liposomes, which is determined during the production process, decreases due to the addition of energy. The energy is used to break the lipid bilayer into smaller pieces, then these pieces close themselves in spherical structures. In this work, the mechanisms of rupture of the lipid bilayer and the formation of spheres were modelled, accounting for how the energy, supplied by ultrasonic radiation, is stored within the layers, as the elastic energy due to the curvature and as the tension energy due to the edge, and to account for the kinetics of the bending phenomenon. An algorithm to solve the model equations was designed and the relative calculation code was written. A dedicated preparation protocol, which involves active periods during which the energy is supplied and passive periods during which the energy supply is set to zero, was defined and applied. The model predictions compare well with the experimental results, by using the energy supply rate and the time constant as fitting parameters. Working with liposomes of different sizes as the starting point of the experiments, the key parameter is the ratio between the energy supply rate and the initial surface area.

Micellar formulations of pro-apoptotic DM-PIT-1 analogs and TRAIL in vitro and in vivo

We have developed and characterized micellar formulations of analogs to the recently developed inhibitor of the phosphatidylinositol-3-kinase (PI3K) pathway (N-[(2-hydroxy-5-nitrophenyl)amino]carbonothioyl-3,5-dimethylbenzamide (DM-PIT-1)) for their physicochemical, loading and cytotoxic properties. The first generation inhibitor DM-PIT-1 is a non-lipid, small molecule inhibitor of phosphatidylinositol-3,4,5-triphosphate/Pleckstrin homology (PIP3/PH) binding capable of inhibiting the growth of tumor cells both in vitro and in vivo. A second generation of improved and druggable analogs has been developed. All compounds were successfully loaded (>70%) in PEG2000-PE micelles of 16-20 nm in size with several analogs demonstrating favorable cytotoxic activity against A2780 ovarian carcinoma. These compounds were also successfully incorporated into polyethylene glycol-phosphatidylethanolamine (PEG-PE) micelles combined with surface-bound tumor necrosis factor related apoptosis inducing ligand (TRAIL). The resulting multifunctional combination micelles were able to significantly enhance cytotoxic activity in the TRAIL-resistant A2780 cell line. Additionally, analogs NCL-176 and NCL-240 were effective in inhibiting tumor growth in an in vivo subcutaneous tumor model of A2780. These results indicate the utility of delivering TRAIL and PI3K pathway inhibitors in a combined micellar preparation.