Recent Advances in the Synthesis, Characterization and Application of Zn+-containing Heterogeneous Catalysts

Interactions between Iron Minerals and Dissolved Organic Matter Derived from Microplastics Inhibited the Ferrihydrite Transformation as Revealed at the Molecular Scale

Microplastic-derived dissolved organic matter (MP-DOM) is an emerging carbon source in the environment. Interactions between MP-DOM and iron minerals alter the transformation of ferrihydrite (Fh) as well as the distribution and fate of MP-DOM. However, these interactions and their effects on both two components are not fully elucidated. In this study, we selected three types of MP-DOM as model substances and utilized Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and extended X-ray absorption fine structure (EXAFS) spectroscopy to characterize the structural features of DOMs and DOM-mineral complexes at the molecular and atomic levels. Our results suggest that carboxyl and hydroxyl groups in MP-DOM increased the Fe-O bond length by 0.02-0.03 Å through interacting with Fe atoms in the first shell, thereby inhibiting the transformation of Fh to hematite (Hm). The most significant inhibition of Fh transformation was found in PS-DOM, followed by PBAT-DOM and PE-DOM. MP-DOM components, such as phenolic compounds and condensed polycyclic aromatics (MW > 360 Da) with high oxygen content and high unsaturation, exhibited stronger mineral adsorption affinity. These findings provide a profound theoretical basis for accurately predicting the behavior and fate of iron minerals as well as MP-DOM in complex natural environments.

Reductive Dimerization of Alkenes and Allenes Enabled by Photochemically Activated Zinc-Zinc Bonded Compounds

Metal radicals have shown versatile reactivity in modern synthetic chemistry. However, the use of zinc radicals for molecular synthesis has been barely explored. Here, we show that a transient zinc radical can be formed through photoactivation of a zinc-zinc bonded compound, which is able to mediate the selective dimerization of alkenes and allenes. Treatment of dizinc compounds [L2Zn2] [L = CH3C(2,6-iPr2C6H3N)CHC(CH3)(NCH2CH2PR2); R = Ph (LPh) or iPr (LiPr)] with a diverse array of aromatic alkenes under UV irradiation (365 nm) facilely afforded the head-to-head coupling products, i.e., 1,4-dizinciobutanes in high yields. In addition, arylallenes could also be selectively dimerized by the dizinc compound to give 2,5-dizincyl-functionalized 1,5-hexadienes under the same conditions. Control reactions of [LPh2Zn2] in the presence of UV irradiation isolated a zinc phenyl complex and a trimeric zinc phosphide complex resulting from C-P bond cleavage at the tridentate ligand. Reactions of photoactivated dizinc compounds with organic spin traps, i.e., 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) and 2,2'-bipyridine (2,2'-bpy), successfully isolated zinc radical trapping products [LZnOTEMP] and [LPhZn(2,2'-bpy)·-], respectively. The profile of alkene dimerization was elucidated by density functional theory calculations, which confirmed that a transient zinc radical [LZn·] was initially generated through homolytic Zn-Zn bond cleavage via photoactivation followed by single-electron transfer and radical dimerization. The unique selectivity of the current reaction was also studied computationally.

Degradation of 2, 4-dichlorophenol by peroxymonosulfate catalyzed by ZnO/ZnMn2 O4

In this study, a highly efficient peroxymonosulfate (PMS) activator, ZnO/ZnMn2 O4 , was synthesized using a simple one-step hydrothermal method. The resulting bimetallic oxide catalyst demonstrated a homogenous and high-purity composition, showcasing synergistic catalytic activity in activating PMS for degrading 2, 4-dichlorophenol (2, 4-DCP) in aqueous solution. This catalytic performance surpassed that of individual ZnO, Mn2 O3 , and ZnMn2 O4 metal materials. Under the optimized conditions, the removal efficiency of 2, 4-DCP reached approximately 86% within 60 min, and the catalytic ability remained almost constant even after four cycles of recycling. The developed degradation system proved effective in degrading other azo-dye pollutants. Certain inorganic anions such as HPO4 - , HCO3 - , and NO3 - significantly inhibited the degradation of 2, 4-DCP, while Cl- and SO4 2- did not exhibit such interference. Results from electrochemical experiments indicated that the electron transfer ability of ZnO/ZnMn2 O4 surpassed that of individual metals, and electron transfer occurred between ZnO/ZnMn2 O4 and the oxidant. The primary active radicals responsible for degrading 2, 4-DCP were identified as SO4 •- , OH• and O2 •- , generated through the oxidation and reduction of PMS catalyzed by Zn (II) and Mn (III). Furthermore, X-ray photoelectron spectroscopy (XPS) analysis of the fresh and used catalysts revealed that the exceptional electron transfer ability of ZnO facilitated the valence transfer of Mn (III) and the transfer of electrons to the catalyst's oxygen surface, thus enhancing the catalytic efficiency. The analysis of radicals and intermediates indicates that the two main pathways for degrading 2, 4-DCP involve hydroxylation and radical attack on its aromatic ring. PRACTITIONER POINTS: A bimetallic ZnO/ZnMn2 O4 catalyst was synthesized and characterized. ZnO/ZnMn2 O4 can synergistically activate PMS to degrade 2, 4-DCP compared with single metal oxide. Three primary active radicals, O2 •- , • OH, and SO4 •- , were generated to promote the degradation. ZnO promoted electron transfer among the three species of Mn to facilitate oxidizing pollutants. Hydroxylation and radical attack on the aromatic ring of 2, 4-DCP are the two degradation pathways.

Catalytic conversion of ethane to valuable products through non-oxidative dehydrogenation and dehydroaromatization

Chemical utilization of ethane to produce valuable chemicals has become especially attractive since the expanded utilization of shale gas in the United States and associated petroleum gas in the Middle East. Catalytic conversion to ethylene and aromatic hydrocarbons through non-oxidative dehydrogenation and dehydroaromatization of ethane (EDH and EDA) are potentially beneficial technologies because of their high selectivity to products. The former represents an attractive alternative to conventional thermal cracking of ethane. The latter can produce valuable aromatic hydrocarbons from a cheap feedstock. Nevertheless, further progress in catalytic science and technology is indispensable to implement these processes beneficially. This review summarizes progress that has been achieved with non-oxidative EDH and EDA in terms of the nature of active sites and reaction mechanisms. Briefly, platinum-, chromium- and gallium-based catalysts have been introduced mainly for EDH, including effects of carbon dioxide co-feeding. Efforts to use EDA have emphasized zinc-modified MFI zeolite catalysts. Finally, some avenues for development of catalytic science and technology for ethane conversion are summarized.

Pressure-Stabilized Zinc Trifluoride

By combining the particle swarm optimization algorithm with first-principles calculation, the high-pressure phase diagram of Zn-F binary compounds was established. An unexpected stoichiometry of ZnF₃ with space group Cccm is thermodynamically stable above 183 GPa. The new structure is fascinating with the appearance of Zn²⁺[F₃]^2- units. The stability of the new phase stems from the mixed ionic and covalent chemical bonding in ZnF₃. The electronic properties indicate that Zn has a tendency to form high oxidation states under higher pressure. Our work is an important step in understanding the bonding behavior of Zn under extreme conditions and provides a valuable reference for experimental synthesis and identification of ZnF₃.

Zn+-O- Dual-Spin Surface State Formation by Modification of ZnO Nanoparticles with Diboron Compounds

ZnO semiconductor oxides are versatile functional materials that are used in photoelectronics, catalysis, sensing, etc. The Zn⁺-O^- surface electronic states of semiconductor oxides were formed on the ZnO surface by Zn 4s and O 2p orbital coupling with the diboron compound's B 2p orbitals. The formation of spin-coupled surface states was based on the spin-orbit interaction on the interface, which has not been reported before. This shows that the semiconductor oxide's spin surface states can be modulated by regulating surface orbital energy. The Zn⁺-O^- surface electronic states were confirmed by electron spin resonance results, which may help in expanding the fundamental research on spintronics modulation and quantum transport.

Nature and Topology of Metal-Oxygen Binding Sites in Zeolite Materials: 17 O High-Resolution EPR Spectroscopy of Metal-Loaded ZSM-5

Determining structural models is pivotal to the rational understanding and development of heterogeneous catalytic systems. A paradigmatic case is represented by open-shell metals supported on oxides, where the catalytic properties crucially depend on the nature of the metal-oxygen bonds and the extent of charge and spin transfer. Through a combination of selective ¹⁷ O isotopic enrichment and the unique properties of open-shell s-state monovalent Group 12 cations, we derive a site-specific topological description of active sites in an MFI zeolite. We show that just a few selected sites out of all possible are populated and that the relative occupancies depend on the specific properties of the metal, and we provide maps of charge and spin transfer at the metal-oxygen interface. This approach is not restricted to zeotype materials, rather it is applicable to any catalysts supported on oxygen-containing materials.

Two-dimensional-related catalytic materials for solar-driven conversion of COx into valuable chemical feedstocks

The discovery of improved chemical processes for CO and CO2 hydrogenation to valuable hydrocarbon fuels and alcohols is of paramount importance for the chemical industry. Such technologies have the potential to reduce anthropogenic CO2 emissions by adding value to a waste stream, whilst also reducing our consumption of fossil fuels. Current thermal catalytic technologies available for CO and CO2 hydrogenation are demanding in terms of energy input. Various alternative technologies are now being developed for COx hydrogenation, with solar-driven processes over two-dimensional (2D) and 2D-related composite materials being particularly attractive due to the abundance of solar energy on Earth and also the high selectivity of defect-engineered 2D materials towards specific valuable products under very mild reaction conditions. This review showcases recent advances in the solar-driven COx reduction to hydrocarbons over 2D-based materials. Optimization of 2D catalyst performance demands interdisciplinary research that embraces catalyst electronic structure manipulation and morphology control, surface/interface engineering, reactor engineering and density functional theory modelling studies. Through improved understanding of the structure-performance relationships in 2D-related catalysts which is achievable through the application of modern in situ characterization techniques, practical photo/photothermal/photoelectrochemical technologies for CO and CO2 reduction to high-valuable products such as olefins could be realized in the not-too-distant future.

Why do zeolites induce an unprecedented electronic state on exchanged metal ions?

Understanding the exact position and the detailed role of the Al array in zeolites is essential for elucidating the origin of unique properties that can be derived from the metal-ion exchanged in zeolite samples and for designing zeolite materials with high efficiency in catalytic and adsorption processes. In this work, we investigate, for the first time, the important role of the Al array in the reactivity observed on the metal-ion exchanged in zeolites on the basis of the calculation method by utilizing the spontaneous heterolytic cleavage of H₂ observed experimentally on the Zn²⁺-ion exchanged in MFI-type zeolites (Zn²⁺-MFI) as the model reaction. In the case of calculation, two main types of models for considering the Al positions in MFI-type zeolites were adopted: in the first type, the Al atoms with appropriate distances are aligned in the circumferential direction of the straight channel (abbreviated as a circumferentially arrayed Al-Al site); in the second type, the nearest neighbouring Al atoms with appropriate distances are directed toward the straight channel axis (abbreviated as a channel directionally arrayed Al-Al site). Results indicated that the Al-array direction governs the reactivity of Zn²⁺-MFI. The former type of array well explains the experimental fact that spontaneous and irreversible heterolysis of H₂ takes place on Zn²⁺-MFI, even at room temperature, whereas the latter type of array is less reactive; high activation energy is required for the heterolytic cleavage of H₂ (ca. >70 kJ mol^-1). A detailed analysis of the geometric and electronic structures of a series of Zn²⁺-MFI models with various Al-array directions clarified the following facts: the circumferentially arrayed Al-Al site induces an inevitable environment around the Zn²⁺ site, with the simultaneous existence of both a Lewis acid point (coordinatively unsaturated and distorted Zn²⁺) and a Lewis base point (the lattice oxygen atom juxtaposed with exchanged Zn²⁺, which participates in the activation of H₂: O_jL). It is the circumferentially arrayed Al-Al atoms that confer acidic and basic nature on the metal ion and the lattice oxygen atom (O_jL), and ultimately trigger the heterolytic dissociation of H₂, even at 300 K.

Ethane and ethylene aromatization on zinc-containing zeolites

The importance of balance between the number of Zn and Brønsted acid sites for aromatization of ethane and ethylene on Zn-ZSM-5 is discussed.