Towards High-Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy

N, S-Rich SEI Derived From Continuously-Releasing Additive for Anode-Free Lithium-Metal Batteries in Commercial Carbonate Electrolyte

Featured with the highest possible energy density, anode-free lithium-metal batteries (AFBs) are still challenged by the fast capacity decay, especially for the ones operated in commercial carbonate electrolytes, which can be ascribed to the poor stability and continual broken/formation of the solid-electrolyte interface (SEI) formed on the anode side. Here, sacrificial additives, which have low solubility in carbonate electrolytes and can be continuously released, are proposed for AFBs. The sacrificial and continuously-releasing feature gifts the additives the capability to form and heal the SEI during the long-term cycling process, thus minimizing the loss of active Li and enabling the AFLMBs with high loading LiNi0.8Co0.1Mn0.1O2 (21.7 mg cm-2) cathode a high capacity-retention of 68.9% after 50 cycles in commercial carbonate electrolyte, in contrast to the control cell failed after 30 cycles. This work presents a simple and potential strategy for the practical applications of AFLMBs.

A Sandwich-structured EVA/Cu2O/Cu Composite Current Collector to Suppress the Lithium Dendrite Growth

The proliferation of lithium dendrites has long posed a formidable hurdle in the widespread adoption of lithium metal batteries, thereby necessitating the urgent resolution of how to effectively mitigate their growth as the paramount challenge in the realm of energy storage. Herein, we have crafted a novel sandwich-structured current collector comprising an ethylene-vinyl acetate polymer (EVA)/Cu2O/Cu configuration, where the EVA thin film acts as a protective barrier, passivating the lithium metal anode, while the Cu2O layer fosters lithiophilic sites conducive to uniform lithium nucleation. Our experiments reveal that the EVA thin film adeptly prevents direct contact and subsequent reactions between the lithium metal and the electrolyte, enhancing the ion mobility of Li+ ions, ultimately leading to a even distribution of lithium deposition. In a Li-Cu half-cell, the incorporation of the EVA film increases the nucleation potentials but dramatically reduces polarization potentials after 50 cycles of charge-discharge processes. Remarkably, the Li-Cu half-cells equipped with EVA-coated current collectors exhibit lower electrochemical resistances, translating into significantly extended cycle lives. This work indicates the sandwich architecture (thin film/lithium metal/lithiophilic compounds) is a promising contender for achieving long-lasting, stable lithium anodes.

Stabilization Strategies of Lithium Metal Anode Toward Dendrite-Free Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are considered as a most promising rechargeable lithium metal batteries because of their high energy density and low cost. However, the Li-S batteries mainly suffer the capacity decay issue caused by the shutting effect of lithium polysulfides and the safety issues arising from the Li dendrites formation. This review outlines the current issues of Li-S batteries. Furthermore, we comprehensively summarized the challenges encountered by Li anode in Li-S batteries, such as the heterogeneous deposition of the Li anode, the unstable solid electrolyte interface (SEI) layer, and volume expansion. Moreover, research progresses in the stabilization strategies of Li anodes (physical approaches, optimization of electrolyte, surface protection layer, and design of current collector) is discussed in detail. Lastly, the remaining challenges and future research directions of Li metal anode stabilization in Li-S batteries are also present.

Towards Superior Aqueous Zinc-Ion Batteries: The Insights of Artificial Protective Interfaces

Aqueous zinc ion batteries (AZIBs) with metallic Zn anode have the potential for large-scale energy storage application due to their cost-effectiveness, safety, environmental-friendliness, and ease of preparation. However, the concerns regarding dendrite growth and side reactions on Zn anode surface hamper the commercialization of AZIBs. This review aims to give a comprehensive evaluation of the protective interphase construction and provide guidance to further improve the electrochemical performance of AZIBs. The failure behaviors of the Zn metal anode including dendrite growth, corrosion, and hydrogen evolution are analyzed. Then, the applications and mechanisms of the constructed interphases are introduced, which are classified by the material species. The fabrication methods of the artificial interfaces are summarized and evaluated, including the in-situ strategy and ex-situ strategy. Finally, the characterization means are discussed to give a full view for the study of Zn anode protection. Based on the analysis of this review, a stable and high-performance Zn anode could be designed by carefully choosing applied material, corresponding protective mechanism, and appropriate construction technique. Additionally, this review for Zn anode modification and construction techniques for anode protection in AZIBs may be helpful in other aqueous metal batteries with similar problems.

Microcapsule Modification Strategy Empowering Separator Multifunctionality to Enhance Safety of Lithium-Metal Batteries

The uncontrollable growth of lithium dendrites and the flammability of electrolytes are the direct impediments to the commercial application of high-energy-density lithium metal batteries (LMBs). Herein, this study presents a novel approach that combines microencapsulation and electrospinning technologies to develop a multifunctional composite separator (P@AS) for improving the electrochemical performance and safety performance of LMBs. The P@AS separator forms a dense charcoal layer through the condensed-phase flame retardant mechanism causing the internal separator to suffocate from lack of oxygen. Furthermore, it incorporates a triple strategy promoting the uniform flow of lithium ions, facilitating the formation of a highly ion-conducting solid electrolyte interface (SEI), and encouraging flattened lithium deposition with active SiO2 seed points, considerably suppressing lithium dendrites growth. The high Coulombic efficiency of 95.27% is achieved in Li-Cu cells with additive-free carbonate electrolyte. Additionally, stable cycling performance is also maintained with a capacity retention rate of 93.56% after 300 cycles in LFP//Li cells. Importantly, utilizing P@AS separator delays the ignition of pouch batteries under continuous external heating by 138 s, causing a remarkable reduction in peak heat release rate and total heat release by 23.85% and 27.61%, respectively, substantially improving the fire safety of LMBs.

3D-Printed Carbon Scaffold for Structural Lithium Metal Batteries

Focus on advancement of energy storage has now turned to curbing carbon emissions in the transportation sector by adopting electric vehicles (EVs). Technological advancements in lithium-ion batteries (LIBs), valued for their lightweight and high capacity, are critical to making this switch a reality. Integrating structurally enhanced LIBs directly into vehicular design tackles two EV limitations: vehicle range and weight. In this study, 3D-carbon (3D-C) lattices, prepared with an inexpensive stereolithography-type 3D printer followed by carbonization, are proposed as scaffolds for Li metal anodes for structural LIBs. Mechanical stability tests revealed that the 3D-C lattice can withstand a maximum stress of 5.15 ± 0.15 MPa, which makes 3D-C lattices an ideal candidate for structural battery electrodes. Symmetric cell tests show the superior cycling stability of 3D-C scaffolds compared to conventional bare Cu foil current collectors. When 3D-C scaffolds are used, a small overpotential (≈0.075 V) is retained over 100 cycles at 1 mA cm-2 for 3 mAh cm-2, while the overpotential of a bare Cu symmetric cell is unstable and increased to 0.74 V at the 96th cycle. The precisely oriented internal pores of the 3D-C lattice confine lithium metal deposits within the 3D scaffold, effectively preventing short circuits.

In Situ-Constructed Multifunctional Composite Anode with Ultralong-Life Toward Advanced Lithium-Metal Batteries

Metallic lithium is the most competitive anode material for next-generation high-energy batteries. Nevertheless, the extensive volume expansion and uncontrolled Li dendrite growth of lithium metal not only cause potential safety hazards but also lead to low Coulombic efficiency and inferior cycling lifespan for Li metal batteries. Herein, a multifunctional dendrite-free composite anode (Li/SnS2) is proposed through an in situ melt-infusion strategy. In this configuration, the 3D cross-linked porous Li2S/Li22Sn5 framework facilitates the rapid penetration of electrolytes and accommodates the volume expansion during the repeated Li-plating process. Meanwhile, the lithiophilic Li2S phases with a low Li+ transport barrier ensure preferential Li deposition, effectively avoiding uneven electron distribution. Moreover, the Li22Sn5 electron conductors with appropriate Li+ bonding ability guarantee rapid charge transport and mass transfer. Most importantly, the steady multifunctional skeleton with sufficient inner interfaces (Li2S/Li22Sn5) in the whole electrode, not only realizes the redistribution of the localized free electron, contributing to the decomposition of Li clusters, but also induces a planar deposition model, thus restraining the generation of Li dendrites. Consequently, an unprecedented cyclability of over 6 500 h under an ultrahigh areal capacity of 10 mAh cm-2 and a current rate of 20 mA cm-2 is achieved for the prepared Li2S/Li22Sn5 composite anode. Moreover, the assembled Li/SnS2||LiFePO4 (LFP) pouch full-cells also demonstrate remarkable rate capability and a convincing cycling lifespan of more than 2 000 cycles at 2 C.

In Situ Visual Observation of Surface Energy-Controlled Heterogeneous Nucleation of Metal Nanocrystals

Electrochemical growth of metal nanocrystals is pivotal for material synthesis, processing, and resource recovery. Understanding the heterogeneous interface between electrolyte and electrode is crucial for nanocrystal nucleation, but the influence of this interaction is still poorly understood. This study employs advanced in situ measurements to investigate the heterogeneous nucleation of metals on solid surfaces. By observing the copper nanocrystal electrodeposition, an interphase interaction-induced nucleation mechanism highly dependent on substrate surface energy is uncovered. It shows that a high-energy (HE) electrode tended to form a polycrystalline structure, while a low-energy (LE) electrode induced a monocrystalline structure. Raman and electrochemical characterizations confirmed that HE interface enhances the interphase interaction, reducing the nucleation barrier for the sturdy nanostructures. This leads to a 30.92-52.21% reduction in the crystal layer thickness and a 19.18-31.78% increase in the charge transfer capability, promoting the formation of a uniform and compact film. The structural compactness of the early nucleated crystals enhances the deposit stability for long-duration electrodeposition. This research not only inspires comprehension of physicochemical processes correlated with heterogeneous nucleation, but also paves a new avenue for high-quality synthesis and efficient recovery of metallic nanomaterials.

LiF-Rich Solid Electrolyte Interphase Formation by Establishing Sacrificial Layer on the Separator

The formation of a stable solid electrolyte interphase (SEI) layer is crucial for enhancing the safety and lifespan of Li metal batteries. Fundamentally, a homogeneous Li+ behavior by controlling the chemical reaction at the anode/electrolyte interface is the key to establishing a stable SEI layer. However, due to the highly reactive nature of Li metal anodes (LMAs), controlling the movement of Li+ at the anode/electrolyte interface remains challenging. Here, an advanced approach is proposed for coating a sacrificial layer called fluorinated self-assembled monolayer (FSL) on a boehmite-coated polyethylene (BPE) separator to form a stable SEI layer. By leveraging the strong affinity between the fluorine functional group and Li+, the rapid formation of a LiF-rich SEI layer in the cell production and early cycling stage is facilitated. This initial stable SEI formation promotes the subsequent homogeneous Li+ flux, thereby improving the LMA stability and yielding an enhanced battery lifespan. Further, the mechanism behind the stable SEI layer generation by controlling the Li+ dynamics through the FSL-treated BPE separator is comprehensively verified. Overall, this research offers significant contributions to the energy storage field by addressing challenges associated with LMAs, thus highlighting the importance of interfacial control in achieving a stable SEI layer.

Recent Progress of Advanced Functional Separators in Lithium Metal Batteries

As a representative in the post-lithium-ion batteries (LIBs) landscape, lithium metal batteries (LMBs) exhibit high-energy densities but suffer from low coulombic efficiencies and short cycling lifetimes due to dendrite formation and complex side reactions. Separator modification holds the most promise in overcoming these challenges because it utilizes the original elements of LMBs. In this review, separators designed to address critical issues in LMBs that are fatal to their destiny according to the target electrodes are focused on. On the lithium anode side, functional separators reduce dendrite propagation with a conductive lithiophilic layer and a uniform Li-ion channel or form a stable solid electrolyte interphase layer through the continuous release of active agents. The classification of functional separators solving the degradation stemming from the cathodes, which has often been overlooked, is summarized. Structural deterioration and the resulting leakage from cathode materials are suppressed by acidic impurity scavenging, transition metal ion capture, and polysulfide shuttle effect inhibition from functional separators. Furthermore, flame-retardant separators for preventing LMB safety issues and multifunctional separators are discussed. Further expansion of functional separators can be effectively utilized in other types of batteries, indicating that intensive and extensive research on functional separators is expected to continue in LIBs.

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

As a very prospective solid-state electrolyte, Li10GeP2S12 (LGPS) exhibits high ionic conductivity comparable to liquid electrolytes. However, severe self-decomposition and Li dendrite propagation of LGPS will be triggered due to the thermodynamic incompatibility with Li metal anode. Herein, by adopting a facile chemical vapor deposition method, an artificial solid electrolyte interphase composed of Li2S is proposed as a single ionic conductor to promote the interface stability of LGPS toward Li. The good electronic insulation coupled with ionic conduction property of Li2S effectively blocks electron transfer from Li to LGPS while enabling smooth passage of Li ions. Meanwhile, the generated Li2S layer remains good interface compatibility with LGPS, which is verified by the stable Li-plating/stripping operation for over 500 h at 0.15 mA cm-2. Consequently, the all-solid-state Li-S batteries (ASSLSBs) with a Li2S layer demonstrate superb capacity retention of 90.8% at 0.2 mA cm-2 after 100 cycles. Even at the harsh condition of 90 °C, the cell can deliver a high reversible capacity of 1318.8 mAh g-1 with decent capacity retention of 88.6% after 100 cycles. This approach offers a new insight for interface modification between LGPS and Li and the realization of ASSLSBs with stable cycle life.

Review of the Real-Time Monitoring Technologies for Lithium Dendrites in Lithium-Ion Batteries

Lithium-ion batteries (LIBs) have the advantage of high energy density, which has attracted the wide attention of researchers. Nevertheless, the growth of lithium dendrites on the anode surface causes short life and poor safety, which limits their application. Therefore, it is necessary to deeply understand the growth mechanism of lithium dendrites. Here, the growth mechanism of lithium dendrites is briefly summarized, and the real-time monitoring technologies of lithium dendrite growth in recent years are reviewed. The real-time monitoring technologies summarized here include in situ X-ray, in situ Raman, in situ resonance, in situ microscopy, in situ neutrons, and sensors, and their representative studies are summarized. This paper is expected to provide some guidance for the research of lithium dendrites, so as to promote the development of LIBs.

Gradient three-dimensional current collector with lithiophilic nanolayer regulation for efficient lithium metal anode construction

Metallic lithium (Li) is highly desirable for Li battery anodes due to its unique advantages. However, the growth of Li dendrites poses challenges for commercialization. To address this issue, researchers have proposed various three-dimensional (3D) current collectors. In this study, the selective modification of a 3D Cu foam scaffold with lithiophilic elements was explored to induce controlled Li deposition. The Cu foam was selectively modified with Ag and Sn to create uniform Cu foam (U-Cu) and gradient lithiophilic Cu foam (G-Cu) structures. Density Functional Theory (DFT) calculations revealed that Ag exhibited a stronger binding energy with Li compared to Sn, indicating superior Li induction capabilities. Electrochemical testing demonstrated that the half cell with the G-Cu@Ag electrode exhibited excellent cycling stability, maintaining 550 cycles with an average Coulombic efficiency (CE) of 97.35%. This performance surpassed that of both Cu foam and G-Cu@Sn. The gradient modification of the current collectors improved the utilization of the 3D scaffold and prevented Li accumulation at the top of the scaffold. Overall, the selective modification of the 3D Cu foam scaffold with lithiophilic elements, particularly Ag, offers promising prospects for mitigating Li dendrite growth and enhancing the performance of Li batteries.

Controlling Fluorination Density of Soluble Polyimide Gate Dielectrics and its Influence on Organic Crystal Growth and Device Operational Stability

Fluorinated polyimides (PIs) are among the most promising candidates for gate dielectric materials in organic electronic devices because of their solution processability and outstanding chemical, mechanical, and thermal stabilities. Additionally, fluorine (F) substitution improves the electrical properties of PI thin films, such as enhanced dielectric properties and reduced surface trap densities. However, the relationship between the fluorination density of PIs and crystal growth modes of vacuum-deposited conjugated molecules on PI thin films, which is directly related to the lateral charge transport along the PI-organic semiconductor interface, has not been systematically studied. Herein, five different soluble PIs with different F densities were synthesized, and the correlation between fluorination and thin-film properties was systematically investigated. Not only were their dielectric properties modulated, but the growth modes of the organic molecules deposited on the PI thin films also changed with increasing surface F density. This phenomenon was observed by both surface and crystallographic analyses, which resulted in extremely high operational stability of field-effect transistors and the successful fabrication of organic complementary circuits. We believe that the correlation between PI backbone fluorination and its thin-film properties will provide practical insights into the material design based on controlled molecular directed surface assembly on fluorinated polymer dielectrics.

Solvation-Tailored PVDF-Based Solid-State Electrolyte for High-Voltage Lithium Metal Batteries

Poly(vinylidene fluoride) (PVDF)-based polymer electro-lytes are attracting increasing attention for high-voltage solid-state lithium metal batteries because of their high room temperature ionic conductivity, adequate mechanical strength and good thermal stability. However, the presence of highly reactive residual solvents, such as N, N-dimethylformamide (DMF), severely jeopardizes the long-term cycling stability. Herein, we propose a solvation-tailoring strategy to confine residual solvent molecules by introducing low-cost 3 Å zeolite molecular sieves as fillers. The strong interaction between DMF and the molecular sieve weakens the ability of DMF to participate in the solvation of Li+, leading to more anions being involved in solvation. Benefiting from the tailored anion-rich coordination environment, the interfacial side reactions with the lithium anode and high-voltage NCM811 cathode are effectively suppressed. As a result, the solid-state Li||Li symmetrical cells demonstrates ultra-stable cycling over 5100 h at 0.1 mA cm-2, and the Li||NCM811 full cells achieve excellent cycling stability for more than 1130 and 250 cycles under the charging cut-off voltages of 4.3 V and 4.5 V, respectively. Our work is an innovative exploration to address the negative effects of residual DMF in PVDF-based solid-state electrolytes and highlights the importance of modulating the solvation structures in solid-state polymer electrolytes.

Dendrite-Free and High-Rate Potassium Metal Batteries Sustained by an Inorganic-Rich SEI

Potassium metal battery is an appealing candidate for future energy storage. However, its application is plagued by the notorious dendrite proliferation at the anode side, which entails the formation of vulnerable solid electrolyte interphase (SEI) and non-uniform potassium deposition on the current collector. Here, this work reports a dual-modification design of aluminum current collector to render dendrite-free potassium anodes with favorable reversibility. This work achieves to modulate the electronic structure of the designed current collector and accordingly attain an SEI architecture with robust inorganic-rich constituents, which is evidenced by detailed cryo-EM inspection and X-ray depth profiling. The thus-produced SEI manages to expedite ionic conductivity and guide homogeneous potassium deposition. Compared to the potassium metal cells assembled using typical aluminum current collector, cells based on the designed current collector realize improved rate capability (maintaining 400 h under 50 mA cm-2 ) and low-temperature durability (stable operation at -50 °C). Moreover, scalable production of the current collector allows for the sustainable construction of high-safety potassium metal batteries, with the potential for reducing the manufacturing cost.

Hybrid Dynamic Covalent Network-Based Protecting Layer for Stable Li-Metal Batteries

Metallic lithium (Li) is considered as the "Holy Grail" anode material for next-generation energy storage systems due to its extremely high theoretical capacity and low electrochemical potential. Before the commercialization of the Li electrode, dendritic Li growth and the unstable solid electrolyte interphase layer should be conquered. Herein, a hybrid covalent adaptable polymer network (HCAPN) is prepared via the random copolymerization of poly(ethylene glycol) methyl ether methacrylate and -acetoacetoxyethyl methacrylate, followed by chemical cross-linking with polyethylenimine (PEI) and amine-modified silicon dioxide (SiO2). Such a hybrid network, where PEI and amine-modified SiO2 formed a vinylogous urethane-based dynamic covalent bond with the copolymer, respectively, shows improved mechanical properties, solvent resistance, and excellent healability/recyclability. As the protecting layer on the Li electrode, the assembled HCAPN@Li||HCAPN@Li symmetric cell shows a long cycle life of 800 h with low overpotential at a current density of 1 mA cm-2, and superior electrochemical performance can be achieved in the HCAPN@Li||LiFePO4 full cell (capacity retention of 77% over 400 cycles at 1.5 C) and HCAPN@Li||NCM811 cell (capacity retention of 79% after 300 cycles). Surface morphology analysis is also performed for physical insight into their role as protecting layer. This work provides a new perspective for constructing a hybrid dynamic covalent network-based polymer protecting layer for inhibiting Li dendrite growth.

Lithiophilic and Eco-Friendly Nano-Se Seeds Unlock Dendrite-Free and Anode-Free Li-Metal Batteries

A 3D host design for lithium (Li)-metal anodes can effectively accommodate volume changes and suppress Li dendrite growth; nonetheless, its practical applicability in energy-dense Li-metal batteries (LMBs) is plagued by excessive Li loading. Herein, we introduced eco- and human-friendly Se seeds into 3D carbon cloth (CC) to create a robust host for efficient Li deposition/stripping. The highly lithiophilic nano-Se endowed the Se-decorated CC (Se@CC) with perfect Li wettability for instantaneous Li infusion. At an optimal Li loading of 17 mg, the electrode delivered an unprecedentedly long life span of 5400 h with low overpotentials <36 mV at 1 mA cm-2/1 mAh cm-2 and 1500 h at 5 mA cm-2/5 mAh cm-2. Furthermore, the uniform Se distribution and strong Li-Se binding allowed for further reduction in Li loading to 2 mg via direct Li electrodeposition. The corresponding LiNi0.8Co0.1Mn0.1O2 (NCM811)-based full cell afforded a high capacity retention rate of 74.67% over 300 cycles at a low N/P ratio of 8.64. Finally, the initial anode-free LMB using a NCM811 cathode and a Se@CC anode current collector demonstrated a high electrode-level specific energy of 531 Wh kg-1 and consistently high CEs >99.7% over 200 cycles. This work highlights a high-performance host design with excellent tunability for practical high-energy-density LMBs.

Design principles of heterointerfacial redox chemistry for highly reversible lithium metal anode

High electrochemical reversibility is required for the application of high-energy-density lithium (Li) metal batteries; however, inactive Li formation and SEI (solid electrolyte interface)-instability-induced electrolyte consumption cause low Coulombic efficiency (CE). The prior interfacial chemical designs in terms of alloying kinetics have been used to enhance the CE of Li metal anode; however, the role of its redox chemistry at heterointerfaces remains a mystery. Herein, the relationship between heterointerfacial redox chemistry and electrochemical transformation reversibility is investigated. It is demonstrated that the lower redox potential at heterointerface contributes to higher CE, and this enhancement in CE is primarily due to the regulation of redox chemistry to Li deposition behavior rather than the formation of SEI films. Low oxidation potential facilitates the formation of the surface with the highly electrochemical binding feature after Li stripping, and low reduction potential can maintain binding ability well during subsequent Li plating, both of which homogenize Li deposition and thus optimize CE. In particular, Mg hetero-metal with ultra-low redox potential enables Li metal anode with significantly improved CE (99.6%) and stable cycle life for 700 cycles at 3.0 mA cm-2. This work provides insight into the heterointerfacial design principle of next-generation negative electrodes for highly reversible metal batteries.

From Liquid to Solid-State Lithium Metal Batteries: Fundamental Issues and Recent Developments

The widespread adoption of lithium-ion batteries has been driven by the proliferation of portable electronic devices and electric vehicles, which have increasingly stringent energy density requirements. Lithium metal batteries (LMBs), with their ultralow reduction potential and high theoretical capacity, are widely regarded as the most promising technical pathway for achieving high energy density batteries. In this review, we provide a comprehensive overview of fundamental issues related to high reactivity and migrated interfaces in LMBs. Furthermore, we propose improved strategies involving interface engineering, 3D current collector design, electrolyte optimization, separator modification, application of alloyed anodes, and external field regulation to address these challenges. The utilization of solid-state electrolytes can significantly enhance the safety of LMBs and represents the only viable approach for advancing them. This review also encompasses the variation in fundamental issues and design strategies for the transition from liquid to solid electrolytes. Particularly noteworthy is that the introduction of SSEs will exacerbate differences in electrochemical and mechanical properties at the interface, leading to increased interface inhomogeneity-a critical factor contributing to failure in all-solid-state lithium metal batteries. Based on recent research works, this perspective highlights the current status of research on developing high-performance LMBs.

Thin Solid Polymer Electrolyte with High-Strength and Thermal-Resistant via Incorporating Nanofibrous Polyimide Framework for Stable Lithium Batteries

Polyethylene oxide (PEO) based polymer electrolytes show promise in expanding the practical applications of lithium (Li) batteries. However, their applications in Li batteries are usually restricted owing to the lack of mechanical strength, poor oxidative stability, and relatively large thickness. Herein, a nanofibrous polyimide (PI) framework enhanced plasticized-PEO solid electrolyte is prepared to realize good mechanical and electrochemical performances. Following the configuration with the PI matrix, this "polymer in polymer" composite electrolyte with a thickness of 17.5 µm exhibits enhanced mechanical strength (13.9 MPa) and outstanding thermal stability. Additionally, it preserves the high ionic conductivity (2.25 × 10-4  S cm-1 , 25 °C). The Li||Li symmetrical battery with the modified electrolyte could achieve a steady Li plating/stripping of more than 500 h, and the critical current density reaches up to 0.6 mA cm-2 at ambient temperature. The LiFePO4 batteries delivery favorable capacity of 132.2 mAh g-1 with capacity retentions of 96.4% and 85.9% after 500 and 1000 cycles at 1 C, respectively. Acceptable cycling performance also could be achieved in LiNi0.5 Co0. 2 Mn0. 3 O2 solid batteries via an inorganic-rich artificial cathode electrolyte interphase.

Scalable engineering of hierarchical layered micro-sized silicon/graphene hybrids via direct foaming for lithium storage

Low-cost micro-sized silicon is an attractive replacement for commercial graphite anodes in advanced lithium-ion batteries (LIBs) but suffers from particle fracture during cycling. Hybridizing micro-sized silicon with conductive carbon materials, especially graphene, is a practical approach to overcome the volume change issue. However, micro-sized silicon/graphene anodes prepared via the conventional technique encounter sluggish Li+ transport due to the lack of efficient electrolyte diffusion channels. Here, we present a facile and scalable method to establish efficient Li+ transport channels through direct foaming from the laminated graphene oxide/micro-sized silicon membrane followed by annealing. The conductive graphene layers and the Li+ transport channels endow the composite material with excellent electronic and ionic conductivity. Moreover, the interconnected graphene layers provide a robust framework for micro-sized silicon particles, allowing them to transform decently in the graphene layer space. Consequently, the prepared hybrid material, namely foamed graphene/micro-sized Si (f-G-Si), can work as a binder-free and free-standing anode without additives and deliver remarkable electrochemical performance. Compared with the control samples, micro-sized silicon wrapped by laminated graphene layers (G-Si) and commercial micro-sized Si, f-G-Si maximizes the utilization of silicon and demonstrates superior performance, disclosing the role of Li+ diffusion channels. This study sheds light on the rational design and manufacture of silicon anodes and beyond.

Uniformizing the lithium deposition by gradient lithiophilicity and conductivity for stable lithium-metal batteries

The practical application of lithium metal batteries is hindered by the poor reversibility and large volume change caused by the uncontrollable dendritic growth and the highly reactive surface. In this work, favorable Li deposition is achieved by generating gradient lithiophilicity and conductivity in an Ag-decorated graphene/holey graphene film (G-HGA). Dendrite-free Li metal is deposited on the G-HGA matrix, which greatly reduces the surface area and suppresses the side reaction between the electrolyte and the dendritic Li. The average Li-metal plating-stripping coulombic efficiency (CE) on the G-HGA matrix maintains ∼98.7% over 350 cycles, compared to a worse average CE (∼97.3%) with the bare Cu matrix, only for less than 100 cycles. A full cell constructed by using LiFePO₄ and prelithiated G-HGA exhibits excellent rate capability and a high capacity retention of 99.6% for 175 cycles at a low negative to positive capacity ratio of 1.13. This advanced design can inspire further development of high-energy and long-lived Li-metal batteries.

Revealing the Multifunctions of Li3N in the Suspension Electrolyte for Lithium Metal Batteries

Inorganic-rich solid-electrolyte interphases (SEIs) on Li metal anodes improve the electrochemical performance of Li metal batteries (LMBs). Therefore, a fundamental understanding of the roles played by essential inorganic compounds in SEIs is critical to realizing and developing high-performance LMBs. Among the prevalent SEI inorganic compounds observed for Li metal anodes, Li₃N is often found in the SEIs of high-performance LMBs. Herein, we elucidate new features of Li₃N by utilizing a suspension electrolyte design that contributes to the improved electrochemical performance of the Li metal anode. Through empirical and computational studies, we show that Li₃N guides Li electrodeposition along its surface, creates a weakly solvating environment by decreasing Li⁺-solvent coordination, induces organic-poor SEI on the Li metal anode, and facilitates Li⁺ transport in the electrolyte. Importantly, recognizing specific roles of SEI inorganics for Li metal anodes can serve as one of the rational guidelines to design and optimize SEIs through electrolyte engineering for LMBs.

2D Materials Boost Advanced Zn Anodes: Principles, Advances, and Challenges

Aqueous zinc-ion battery (ZIB) featuring with high safety, low cost, environmentally friendly, and high energy density is one of the most promising systems for large-scale energy storage application. Despite extensive research progress made in developing high-performance cathodes, the Zn anode issues, such as Zn dendrites, corrosion, and hydrogen evolution, have been observed to shorten ZIB's lifespan seriously, thus restricting their practical application. Engineering advanced Zn anodes based on two-dimensional (2D) materials are widely investigated to address these issues. With atomic thickness, 2D materials possess ultrahigh specific surface area, much exposed active sites, superior mechanical strength and flexibility, and unique electrical properties, which confirm to be a promising alternative anode material for ZIBs. This review aims to boost rational design strategies of 2D materials for practical application of ZIB by combining the fundamental principle and research progress. Firstly, the fundamental principles of 2D materials against the drawbacks of Zn anode are introduced. Then, the designed strategies of several typical 2D materials for stable Zn anodes are comprehensively summarized. Finally, perspectives on the future development of advanced Zn anodes by taking advantage of these unique properties of 2D materials are proposed.

Selecting the Optimal Fluorinated Ether Co-Solvent for Lithium Metal Batteries

To guide the selection of a suitable fluorinated ether (FE) co-solvent for lithium metal batteries, it is crucial to understand the relationship between the organic structures of the FEs and the electrochemical performance of an FE-containing electrolyte. In this work, 1,1,2,2-tetrafluoro-1-(2,2,2-trifluoroethoxy)ethane (FEE), 1,1,2,2-tetrafluoro-3-(1,1,2,2-tetrafluoroethoxy)propane (TTE), and 1,2-bis(1,1,2,2-tetrafluoroethoxy)ethane (OFDEE) were chosen as representative FE co-solvents because of their distinct structural properties. The structure-activity relationship between the FEs and the electrochemical performance of Li||LiNi_0.6Mn_0.2Co_0.2O₂ (Li||NMC622) cells was correlated and quantified by Fourier-transform infrared and multi-dimensional nuclear magnetic resonance techniques. Sand's model was also employed to assess the extent of lithium dendrite formation in the cells using various FE electrolytes. The cycling performance of Li||NMC622 cells using different FE co-solvents follows the order FEE > TTE > OFDEE. Since the direct measurement of Sand's time is difficult, we introduced relative Sand's time to probe the diffusion behavior of each electrolyte, and the results showed that the best performance was obtained in the electrolyte with the longest relative Sand's time. Moreover, the lithium metal cell using the electrolyte with FEE co-solvent showed similar capacity retention compared with the baseline electrolyte at room temperature, but it demonstrated significantly improved low-temperature performance. The results indicate that FEE is a promising co-solvent candidate for improving the low-temperature performance of lithium metal batteries because it possesses not only non-solvating behavior but also very low viscosity and non-flammability. The advanced electrolyte LiPF₆-FEC-DMC-FEE enables very stable cycling of lithium metal batteries at various temperatures.

Coupling Particle Ordering and Spherulitic Growth for Long-Term Performance of Nanocellulose/Poly(ethylene oxide) Electrolytes

Development of lithium-ion batteries with composite solid polymer electrolytes (CPSEs) has attracted attention due to their higher energy density and improved safety compared to systems utilizing liquid electrolytes. While it is well known that the microstructure of CPSEs affects the ionic conductivity, thermal stability, and mechanical integrity/long-term stability, the bridge between the microscopic and macroscopic scales is still unclear. Herein, we present a systematic investigation of the distribution of TEMPO-oxidized cellulose nanofibrils (t-CNFs) in two different molecular weights of poly(ethylene oxide) (PEO) and its effect on Li⁺ ion mobility, bulk conductivity, and long-term stability. For the first time, we link local Li-ion mobility at the nanoscale level to the morphology of CPSEs defined by PEO spherulitic growth in the presence of t-CNF. In a low-MW PEO system, spherulites occupy a whole volume of the derived CPSE with t-CNF being incorporated in between lamellas, while their nuclei remain particle-free. In a high-MW PEO system, spherulites are scarce and their growth is arrested in a non-equilibrium cubic shape due to the strong t-CNF network surrounding them. Electrochemical strain microscopy and solid-state ⁷Li nuclear magnetic resonance spectroscopy confirm that t-CNF does not partake in Li⁺ ion transport regardless of its distribution within the polymer matrix. Free-standing CSPE films with low-MW PEO have higher conductivity but lack long-term stability due to the existence of uniformly distributed, particle-free, spherulite nuclei, which have very little resistance to Li dendrite growth. On the other hand, high-MW PEO has lower conductivity but demonstrates a highly stable Li cycling response for more than 1000 h at 0.2 mA/cm² and 65 °C and more than 100 h at 85 °C. The study provides a direct link between the microscopic dynamic, Li-ion transport, bulk mechanical properties and long-term stability of the derived CPSE and, and as such, offers a pathway towards design of robust all-solid-state Li-metal batteries.

Toward Dendrite-Free Metallic Lithium Anodes: From Structural Design to Optimal Electrochemical Diffusion Kinetics

Lithium metal anodes are ideal for realizing high-energy-density batteries owing to their advantages, namely high capacity and low reduction potentials. However, the utilization of lithium anodes is restricted by the detrimental lithium dendrite formation, repeated formation and fracturing of the solid electrolyte interphase (SEI), and large volume expansion, resulting in severe "dead lithium" and subsequent short circuiting. Currently, the researches are principally focused on inhibition of dendrite formation toward extending and maintaining battery lifespans. Herein, we summarize the strategies employed in interfacial engineering and current-collector host designs as well as the emerging electrochemical catalytic methods for evolving-accelerating-ameliorating lithium ion/atom diffusion processes. First, strategies based on the fabrication of robust SEIs are reviewed from the aspects of compositional constituents including inorganic, organic, and hybrid SEI layers derived from electrolyte additives or artificial pretreatments. Second, the summary and discussion are presented for metallic and carbon-based three-dimensional current collectors serving as lithium hosts, including their functionality in decreasing local deposition current density and the effect of introducing lithiophilic sites. Third, we assess the recent advances in exploring alloy compounds and atomic metal catalysts to accelerate the lateral lithium ion/atom diffusion kinetics to average the spatial lithium distribution for smooth plating. Finally, the opportunities and challenges of metallic lithium anodes are presented, providing insights into the modulation of diffusion kinetics toward achieving dendrite-free lithium metal batteries.

Hierarchically Porous Ferroelectric Layer with the Aligned Dipole Moment for a High-Performance Aqueous Zn Metal Battery

Rechargeable aqueous Zn metal batteries (AZMBs) are desirable because of the advantages of metallic Zn and aqueous media. However, AZMBs suffer from limited cyclability and low Coulombic efficiency, originating from uncontrolled dendrite growth and side reactions such as hydrogen gas evolution and corrosion. A hierarchically porous poly(vinylidene difluoride) (PVDF) protection layer with ferroelectric β-phases is formed on the Zn metal using a simple electrospinning method. This suppresses Zn metal failure modes such as side reactions and dendrite growth and supports rapid electrolyte accessibility. The synergetic effect of hierarchically porous structures and ferroelectricity not only facilitates a supporting matrix to form uniform nucleation sites for Zn deposition but also inhibits corrosion, allowing dendrite-free Zn deposition. This multifunctional PVDF film significantly improves the cyclability of Zn symmetric cells, allowing for up to 850 h of repeated plating/stripping cycles. Moreover, it exhibits an excellent cycle life of 1000 cycles under harsh conditions and high current densities of 4.0-10.0 mA cm^-2, which are 62-fold higher than those that the bare Zn electrode tolerates.

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

Polymer-based solid electrolytes (PSEs) offer great promise in developing lithium metal batteries due to their attractive features such as safety, light weight, low cost, and high processability. However, a PSE-based lithium battery usually requires a relatively high temperature (60 °C or above) to complete charge and discharge due to the poor ionic conductivity of PSEs. Herein, a gel polymer electrolytes (GPEs) film with a supramolecular network structure through a facile one-step photopolymerization is designed and developed. The crosslinked structure and quadruple hydrogen bonding fulfil the GPEs with high thermal stability and good mechanical property with a maximum tensile strain of 48%. The obtained GPEs possess a high ionic conductivity of 3.8 × 10^-3 S cm^-1 at 25 °C and a decomposition voltage ≥ 4.6 V (vs Li/Li⁺ ). The cells assembled with LiFePO₄ cathode and Li anode, present an initial discharge specific capacity of 155.6 mAh g^-1 and a good cycling efficiency with a capacity retention rate of 81.1% after 100 charges/discharge cycles at 0.1 C at ambient temperature. This work encompasses a route to develop high performance PSEs that can be operated at room temperature for future lithium metal batteries.

Interface Crystallographic Optimization of Crystal Plane for Stable Metallic Lithium Anode

Li metal, the ideal anode material for rechargeable batteries, suffers from the inherent limitations of uneven interface kinetics and dendrite growth. Herein, we tackle this issue by applying an interface crystallographic optimization strategy. We demonstrate a promising metallic Li anode design by introducing a customized magnetron sputtering layer of preferred orientation copper coating on the surface of a current collector. The sputtered Cu layer employed is stable against the highly reactive robust Li metal to render the surface lithiophilic and achieve promoted interface kinetics due to the perfect interface-crystal plane matching between the sputtered copper layer and premier Li metal. The dendrite-free Li anode sustains stable interface kinetics and achieves a stable life span of 200 cycles during the plating and stripping process in commercial carbonate electrolytes. This design based on crystallographic optimization provides important insights into the design principles of the Li metal anode as well as other alkali metal anodes (Na, K, Zn, Mg, and Al).

A 2D Ultrathin Nanopatterned Interlayer to Suppress Lithium Dendrite Growth in High-Energy Lithium-Metal Anodes

A novel strategy for robust and ultrathin (<1 µm) multilayered protective structures to address uncontrolled Lithium (Li) dendrite growth at Li-metal battery anodes is reported. Synergetic interaction among Ag nanoparticles (Ag NPs), reduced graphene oxide (rGO) films, and self-assembled block-copolymer (BCP) layers enables effective suppression of dendritic Li growth. While Ag NP layer confines the growth of Li metal underneath the rGO layer, BCP layer facilitates the fast and uniformly distributed flux of Li-ion transport and mechanically supports the rGO layer. Notably, highly aligned nanochannels with ≈15 nm diameter and ≈600 nm length scale interpenetrating within the BCP layer offer reversible well-defined pathways for Li-ion transport. Dramatic stress relaxation with the multilayered structure is confirmed via structural simulation considering the mechanical stress induced by filamentary-growth of Li metal. Li-metal anodes modified with the protective layer well-maintain stable reaction interfaces with limited solid-electrolyte interphase formation, yielding outstanding cycling stability and enhanced rate capability, as demonstrated by the full-cells paired with high-loading of LiFePO₄ cathodes. The idealized design of multilayer protective layer provides significant insight for advanced Li-metal anodes.

Tuning 4f-Center Electron Structure by Schottky Defects for Catalyzing Li Diffusion to Achieve Long-Term Dendrite-Free Lithium Metal Battery

Lithium metal is considered as the most prospective electrode for next-generation energy storage systems due to high capacity and the lowest potential. However, uncontrollable spatial growth of lithium dendrites and the crack of solid electrolyte interphase still hinder its application. Herein, Schottky defects are motivated to tune the 4f-center electronic structures of catalysts to provide active sites to accelerate Li transport kinetics. As experimentally and theoretically confirmed, the electronic density is redistributed and affected by the Schottky defects, offering numerous active catalytic centers with stronger ion diffusion capability to guide the horizontal lithium deposition against dendrite growth. Consequently, the Li electrode with artificial electronic-modulation layer remarkably decreases the barriers of desolvation, nucleation, and diffusion, extends the dendrite-free plating lifespan up to 1200 h, and improves reversible Coulombic efficiency. With a simultaneous catalytic effect on the conversions of sulfur species at the cathodic side, the integrated Li-S full battery exhibits superior rate performance of 653 mA h g-1 at 5 C, high long-life capacity retention of 81.4% at 3 C, and a high energy density of 2264 W h kg-1 based on sulfur in a pouch cell, showing the promising potential toward high-safety and long-cycling lithium metal batteries.

Advances in the Development of Single-Atom Catalysts for High-Energy-Density Lithium-Sulfur Batteries

Although lithium-sulfur (Li-S) batteries are promising next-generation energy-storage systems, their practical applications are limited by the growth of Li dendrites and lithium polysulfide shuttling. These problems can be mitigated through the use of single-atom catalysts (SACs), which exhibit the advantages of maximal atom utilization efficiency (≈100%) and unique catalytic properties, thus effectively enhancing the performance of electrode materials in energy-storage devices. This review systematically summarizes the recent progress in SACs intended for use in Li-metal anodes, S cathodes, and separators, briefly introducing the operating principles of Li-S batteries, the action mechanisms of the corresponding SACs, and the fundamentals of SACs activity, and then comprehensively describes the main strategies for SACs synthesis. Subsequently, the applications of SACs and the principles of SACs operation in reinforced Li-S batteries as well as other metal-S batteries are individually illustrated, and the major challenges of SACs usage in Li-S batteries as well as future development directions are presented.

Stable Lithium Plating and Stripping Enabled by a LiPON Nanolayer on PP Separator

The practical application of the Li metal anode (LMA) is hindered by its low coulombic efficiency and dendrite formation. Although solid-state electrolytes hold promise as ideal partners for LMA, their effectiveness is limited by the poor workability and ionic conductivity. Herein, a modified separator combining the rapid Li⁺ transport of a liquid electrolyte and the interfacial stability of a solid-state electrolyte is explored to realize stable cycling of the LMA. A conformal nanolayer of LiPON is coated on a polypropylene separator by a scalable magnetron sputtering method, which is compatible with current Li-ion battery production lines and promising for the practical applications. The resulting LMA-electrolyte/separator interface is Li⁺ -conductive, electron-insulating, mechanically and chemically stable. Consequently, Li|Li cells maintain stable dendrite-free cycling with overpotentials of 10 and 40 mV over 2000 h at 1 and 5 mA cm^-2 , respectively. Additionally, the Li|LiFePO₄ full cells achieve a capacity retention of 92% after 550 cycles, confirming its application potential.

An Anode-Free Potassium-Metal Battery Enabled by a Directly Grown Graphene-Modulated Aluminum Current Collector

Potassium (K)-metal batteries have emerged as a promising energy-storage device owing to abundant K resources. An anode-free architecture that bypasses the need for anode host materials can deliver an elevated energy density. However, the poor efficiency of K plating/stripping on potassiophobic anode current collectors results in rapid K inventory loss and a short cycle life. Herein, commercial Al foils are decorated with an ultrathin graphene-modified layer (Al@G) through roll-to-roll plasma-enhanced chemical vapor deposition. By harnessing strong adhesion (10.52 N m^-1 ) and a high surface energy (66.6 mJ m^-2 ), the designed Al@G structure ensures a highly smooth and ordered K plating/stripping process. Consequently, during K-metal plating/stripping, Al@G can operate at a current density of up to 4.0 mA cm^-2 and cyclic capacity of up to 4.0 mAh cm^-2 , with an ultralong lifespan of up to 1000 h at 0.5 mA cm^-2 and stable cycling of up to 750 h under periodic current fluctuations of 0.1-2.0 mA cm^-2 . In addition, a novel anode-free K-metal full-cell prototype enabled by Al@G anode current collectors is constructed, demonstrating ameliorative cyclic stability.

Elemental Two-Dimensional Materials for Li/Na-Ion Battery Anode Applications

Two-dimensional (2D) nanostructure is currently the subject in the fields of new energy storage and devices. During the past years, a broad range of 2D materials represented by graphene have been developed and endow with excellent electrochemical properties. Among them, elemental 2D materials (Xenes) are an emerged material family for Li/Na-ion battery (LIB/SIB) anodes. Compared with other 2D materials and bulk materials, Xenes may exhibit some great superiorities for Li/Na storage, including excellent conductivity, fast ion diffusion and large active sites exposure. In this review, we provide a systematic summary of the recent progress and achievements of Xenes as well as their applications in LIBs/SIBs. The broad categorization of Xenes from group IIIA to VIA has been concisely outlined, and the related details in syntheses, structures and Li/Na-ion storage properties are reviewed. Further, the latest research progress of Xenes in Li/Na ion batteries are summarized, together with mechanism discussions. Finally, the challenges and prospects of Xenes applied to Li/Na ion battery are proposed based on its current developments.

Green Polymer Electrolytes Based on Polycaprolactones for Solid-State High-Voltage Lithium Metal Batteries

Solid polymer electrolytes (SPEs) have attracted considerable attention for high energy solid-state lithium metal batteries (LMBs). In this work, potentially ecofriendly, solid-state poly(ε-caprolactone) (PCL)-based star polymer electrolytes with cross-linked structures (xBt-PCL) are introduced that robustly cycle against LiNi_0.6 Mn_0.2 Co_0.2 O₂ (NMC622) composite cathodes, affording long-term stability even at higher current densities. Their superior features allow for sufficient suppression of dendritic lithium deposits, as monitored by ⁷ Li solid-state NMR. Advantageous electrolyte|electrode interfacial properties derived from cathode impregnation with 1.5 wt% PCL enable decent cell performance until up to 500 cycles at rates of 1C (60 °C), illustrating the high potential of PCL-based SPEs for application in high-voltage LMBs.

Advanced Lithium Primary Batteries: Key Materials, Research Progresses and Challenges

In recent years, with the vigorous development and gradual deployment of new energy vehicles, more attention has been paid to the research on lithium-ion batteries (LIBs). Compared with the booming LIBs, lithium primary batteries (LPBs) own superiority in specific energy and self-discharge rate and are usually applied in special fields such as medical implantation, aerospace, and military. Widespread application in special fields also means more stringent requirements for LPBs in terms of energy density, working temperature range and shelf life. Therefore, how to obtain LPBs with high energy density, wide operational temperature range and long storage life is of great importance in future development. In view of the above, this paper reviews the latest research on LPBs in cathode, anode and electrolyte over the years, and puts forward relevant insights for LPBs, along with the intention to explore avenues for the design of LPBs components in the coming decades and promote further development in this field.

Open-Source CFD Elucidating Mechanism of 3D Pillar Electrode in Improving All-Solid-State Battery Performance

All-solid-state batteries (ASSBs) have become an important technology because of their high performance and low-risk operation. However, the high interface resistance and low ionic conductivity of ASSBs hinder their application. In this study, a self-developed electrochemical model based on an open-source computational fluid dynamics platform is presented. The effect of contact area reduction at the electrode/solid-state electrolyte interface is investigated. Then, a new conceptual 3D structure is introduced to circumvent the existing barriers. The results demonstrate that the discharge time is shortened by over 20% when the area contact ratio reduces from 1.0 to 0.8 at 1 C-rate, owing to the increased overpotential. By adopting the new 3D pillar design, the energy density of ASSBs can be improved. However, it is only when a 3D current collector is contained in the cathode that the battery energy/power density, capacity, and material utilization can be greatly enhanced without being limited by pillar height issues. Therefore, this work provides important insight into the enhanced performance of 3D structures.

Application of electrodeposited Cu-metal nanoflake structures as 3D current collector in lithium-metal batteries

Since uncontrolled lithium (Li) dendrite growth and dendrite-induced dead Li severely limit the development of Li metal batteries, 3D Cu current collectors can effectively alleviate these problems during Li plating/stripping. Herein, one-step galvanostatic electrodeposition method is employed to fabricate a new current collector on Cu foam decorated with large-scale and uniform 3D porous Cu-based nanoflake (NF) structures (abbreviated as 3D Cu NF@Cu foam). This 3D structure with large internal surface areas not only generates lithophilic surface copper oxides and hydroxides as charge centers and nucleation sites for Li insertion/extraction, but also endows abundant space with interlinked NFs for buffering the cell volume expansion and increasing battery performance. As a result, Li-deposited 3D Cu NF@Cu foam current collector can realize stable cycling over 455 cycles with an average Coulombic efficiency of 98.8% at a current density of 1.0 mA cm^-2, as well as a prolonged lifespan of >380 cycles in symmetrical cell without short-circuit, which are superior to those of blank Cu foam current collector. This work realizes Li metal anode stabilization by constructing 3D porous Cu NFs current collectors, which can advance the development of Li metal anode for battery industries.

Stable Li metal anode in a lithiophilic shuttle

Suppressing severe lithium (Li) dendrite growth is a formidable challenge for high-energy-density lithium (Li) metal batteries (LMBs). Conventional lithiophilic coatings, despite their ability to improve the Li plating morphology, generate a compact conversion layer with a low electrolyte volume fraction, impeding the mass- and charge-transfers at the electrode interface and offsetting the benefits brought by lithiophilicity. Herein, a lithiophilic shuttle is obtained by the superposition of very thin layered copper oxide (L-CuO) flakes. After the conversion process, conjoined channels with a high electrolyte volume fraction can be maintained in the lithiophilic shuttle for fast and lateral Li⁺ transfer. In addition to the inherent high-Li-affinity and layered-structure-induced capacitive feature, the lithiophilic shuttle can afford stable and reversible Li plating/stripping at high current densities up to 3 mA cm^-2 in LMBs with a practical capacity of 5 mA h cm^-2. This work provides a new hierarchical lithiophilic structure to push forward high-energy-density LMBs for practical applications.

Importance of Halide Ions in the Stabilization of Hybrid Sn-Based Coatings for Lithium Electrodes

The properties of hybrid Sn-based artificial solid electrolyte interphase (SEI) layers in protecting Li-metal electrodes toward surface instabilities were investigated via a combined experimental and theoretical approach. The performance of coating layers can be coherently explained based on the nature of the coating species. Notably, when starting from a chloride precursor, the hybrid coating layer is formed by an intimate mixture of Li₇Sn₂ and LiCl: the first ensures a high bulk ionic conductivity, while the second forms an external layer allowing a fast surface diffusion of Li⁺ to avoid dendrite growth, a low surface tension to guarantee the thermodynamic stability of the protective layer, and a negative underneath plating energy (UPE) to promote lithium plating at the interface between the Li metal and the coating layer. The synergy between the two components and, in particular, the crucial role of LiCl in the promotion of such an underneath plating mechanism are shown to be the key properties to improve the performance of artificial SEI layers.