Full-Color Emission Polymer Carbon Dots with Quench-Resistant Solid-State Fluorescence

d-arginine-functionalized carbon dots with enhanced near-infrared emission and prolonged metabolism time for tumor fluorescent-guided photothermal therapy

Carbon dots (CDs) have garnered significant interest owing to their distinctive optical properties. However, their bioimaging and biomedical applications are limited by pronounced fluorescence (FL) quenching in aqueous media and low tumor accumulation efficacy associated with their ultra-small size. This study proposes a simple surface modification approach using functioning d-arginine on CDs (d-Arg@CDs) to improve their near-infrared (NIR) FL in aqueous solution and maintain their high photothermal conversion properties. Because of the low utilization rate of dextral amino acids in animals, modifying CDs with low molecular weight d-arginine did not increase particle size but extended the metabolism time in blood circulation, thereby leading to enhanced accumulation efficacy at tumor sites in the mice model. The enhanced tumor accumulation of d-Arg@CDs resulted in significantly superior tumor NIR FL imaging and photothermal therapy performance compared with pure CDs and l-arginine functionalized CDs. This dextral amino acid modification approach is expected to be an effective tool for enhancing the biomedical applications of CDs.

Twisted Structure Induced Solid-State Fluorescence and Room-Temperature Phosphorescence from Furan-Based Carbon Dots

Boron doping can effectively induce solid-state fluorescence (SSF) in carbon dots (CDs); however, research on the intrinsic mechanism underlying this phenomenon is lacking. Herein, a design strategy for boron-doped furan-based CDs is proposed, CDs with aggregation-induced emission (AIE) properties are synthesized, and the mechanism by which boron atom dopants induces SSF and room-temperature phosphorescence (RTP) is elucidated. The morphology and structural characterization of the CDs indicate that boron doping leads to structural twisting of the CDs. The AIE phenomenon of CDs arises from the inhibition of the twisted structure motions and a reduction in the nonradiative relaxation rate during the aggregation process. In addition, CDs with twisted structures exhibit a smaller overlap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), effectively reducing the singlet-triplet splitting energy (ΔEST). CDs embedded in microcrystalline cellulose (MCC) exhibit green RTP because the nonradiative transitions are suppressed, and the excited triplet species remain stable. For the first time, this study reveals the structure-activity relationship between the twisted structure and optical properties of CDs, providing a new approach for the preparation of solid-state light-emitting CDs.

Solid-State Fluorescent Carbon Dots with Hydrophobic Modification Induced Red Emission for White Light-Emitting Diodes

Herein, we developed red solid-state fluorescent carbon dots (SSF-CDs) through a one-step solvothermal method, utilizing acetone as the carbonization solvent. Optical and structural characterization revealed that the sp2 domains in the core of the R-CDs were consistently interrupted and that the oxygen-containing groups on the surface were replaced by alkyl groups. This substitution mitigates excessive π-π interactions, thereby preventing quenching of fluorescence in the solid state. Adjusting the molar ratio of citric acid (CA) and urea yielded solid fluorescent carbon dots (CDs) with panchromatic luminescence, indicating enhanced π-π interactions and more pronounced red shifts in the emission peaks. Furthermore, we found that this strategy is applicable to other carbon sources, including phenylenediamine, salicylic acid, and lignin. This research presents an innovative strategy for the fabrication of solid-state luminescent CDs.

Rare-Earth-Metal-Free Solid-State Fluorescent Carbonized-Polymer Microspheres for Unclonable Anti-Counterfeit Whispering-Gallery Emissions from Red to Near-Infrared Wavelengths

Colloidal carbon dots (CDs) have garnered much attention as metal-free photoluminescent nanomaterials, yet creation of solid-state fluorescent (SSF) materials emitting in the deep red (DR) to near-infrared (NIR) range poses a significant challenge with practical implications. To address this challenge and to engineer photonic functionalities, a micro-resonator architecture is developed using carbonized polymer microspheres (CPMs), evolved from conventional colloidal nanodots. Gram-scale production of CPMs utilizes controlled microscopic phase separation facilitated by natural peptide cross-linking during hydrothermal processing. The resulting microstructure effectively suppresses aggregation-induced quenching (AIQ), enabling strong solid-state light emission. Both experimental and theoretical analysis support a role for extended π-conjugated polycyclic aromatic hydrocarbons (PAHs) trapped within these microstructures, which exhibit a progressive red shift in light absorption/emission toward the NIR range. Moreover, the highly spherical shape of CPMs endows them with innate photonic functionalities in combination with their intrinsic CD-based attributes. Harnessing their excitation wavelength-dependent photoluminescent (PL) property, a single CPM exhibits whispering-gallery modes (WGMs) that are emission-tunable from the DR to the NIR. This type of newly developed microresonator can serve as, for example, unclonable anti-counterfeiting labels. This innovative cross-cutting approach, combining photonics and chemistry, offers robust, bottom-up, built-in photonic functionality with diverse NIR applications.

Preparation and Application of a Sulfur-Doped Fluorescent Carbon Dots with Aggregation-Induced Emission Character

As a new type of zero-dimensional nanomaterial, carbon dots are widely applied in various fields. However, most of the carbon dots have aggregation fluorescence quenching properties, which limited their practical applications. In this study, a novel sulfur-doped carbon dots (S-CDs) was prepared by solvothermal method. The properties of the S-CDs in ethanol solution and in solid state were investigated respectively. The results showed that the S-CDs have an excited wavelength dependent emission of blue fluorescence in ethanol solution, and have orange fluorescence emission in solid state and composite films, indicating the prepared S-CDs has aggregation-induced emission (AIE) performance. The main reason was that the presence of S-S bonds and the intramolecular rotation of aromatic rings were limited in solid state, resulting in its emission of orange fluorescence. Furthermore, the S-CDs could be applied to identify fingerprints, anti-counterfeiting.

Solid-State Red Carbon Dots Based on Biomass Furan Derivatives

In the preparation of carbon dots (CDs), precursors are crucial, and abundant precursors endow CDs with various structures and fluorescence characteristics. Furan (FU) and its derivatives are considered excellent carbonization materials due to their π conjugated structures and active functional groups, such as hydroxyl and aldehyde groups. Herein, we prepare FU-derivative-based CDs by a solvothermal method and investigate the influences of the precursor structure on the fluorescence characteristics. Surprisingly, CDs prepared from 5-hydroxymethylfurfural (HMF) with both aldehyde and hydroxyl groups exhibit red-shifted fluorescence characteristics in the solid state. We postulate that this solid-state fluorescence characteristic is due to the enhancement of supramolecular cross-linking fluorescence between CDs. The unique precursor structure leads to carboxyl groups on the surface of HMF-CDs that are conducive to the hydrogen bond formation. As the concentration of CDs increases, the hydrogen bonding effect increases, leading to a red-shift in the fluorescence wavelength. Therefore, basically full-color CDs/poly(vinyl alcohol) (PVA) phosphor-based light-emitting diodes can be achieved by controlling the degree of supramolecular cross-linking of CDs in PVA. This research provides a new approach for the preparation of solid-state luminescent CDs.

Carbon dots as versatile nanomaterials in sensing and imaging: Efficiency and beyond

Carbon dots (CDs) have emerged as a versatile and promising carbon-based nanomaterial with exceptional optical properties, including tunable emission wavelengths, high quantum yield, and photostability. CDs are appropriate for various applications with many benefits, such as biocompatibility, low toxicity, and simplicity of surface modification. Thanks to their tunable optical properties and great sensitivity, CDs have been used in sensing as fluorescent probes for detecting pH, heavy metal ions, and other analytes. In addition, CDs have demonstrated potential as luminescence converters for white organic light-emitting diodes and light emitters in optoelectronic devices due to their superior optical qualities and exciton-independent emission. CDs have been used for drug administration and bioimaging in the biomedical field due to their biocompatibility, low cytotoxicity, and ease of functionalization. Additionally, due to their stability, efficient charge separation, and low recombination rate, CDs have shown interesting uses in energy systems, such as photocatalysis and energy conversion. This article highlights the growing possibilities and potential of CDs as adaptable nanomaterials in a variety of interdisciplinary areas related to sensing and imaging, at the same time addressing the major challenges involved in the current research and proposing scientific solutions to apply CDs in the development of a super smart society.

High solid-state photoluminescence quantum yield of carbon-dot-derived molecular fluorophores for light-emitting devices

Several recent studies of carbon dots (CDs) synthesized by bottom-up methods under mild conditions have reported the presence of organic molecular fluorophores in CD dispersions. These fluorophores have a tendency to aggregate, and their properties strongly depend on whether they are present in the form of discrete molecules or aggregates. The aggregation becomes more prominent in the solid state, which motivates the study of the properties of the fluorophores associated with CDs in the solid state. Here, we report the solid-state characterization of N4,N11-dimethyldibenzo[a,h]phenazine-4,11-diamine (BPD) - a molecular fluorophore that forms CDs. Discrete BPD molecules show excitation-wavelength-independent photoluminescence (PL) emission in the green wavelength region at ∼520 nm. However, additional blue PL is also observed due to aggregation, making the PL emission significantly broad. For detailed studies, BPD is mixed in different solid matrices, and it is observed that the PL quantum yield (PLQY) of BPD films strongly depends on the concentration of BPD in the solid matrices. Increasing the concentration of BPD results in a considerable decrease in the PLQY. The PLQY of the films with an optimum concentration of BPD is 75.9% and 40.2% in polymethyl methacrylate and polystyrene, respectively. At higher concentrations, these PLQY values decrease to ∼11%. The significant decrease in the PLQY is ascribed to reabsorption and nonradiative exciton decay that is facilitated by BPD aggregation at higher concentrations. Finally, light-emitting devices (LEDs) were fabricated with almost pure white emission color, having CIE (International Commission on Illumination) coordinates of (0.35, 0.37) using BPD in the color-converting layer of blue-pumped LEDs. The device shows a luminous efficiency 3.8 lm W-1 and luminance of 43 331 cd m-2.

Bioinspired Carbonized Polymer Microspheres for Full-Color Whispering Gallery Mode Emission for White Light Emission, Unclonable Anticounterfeiting, and Chemical Sensing Applications

Light-element-based fluorescent materials, colloidal graphene quantum dots, and carbon dots (CDs) have sparked an immense amount of scientific interest in the past decade. However, a significant challenge in practical applications has emerged concerning the development of solid-state fluorescence (SSF) materials. This study addresses this knowledge gap by exploring the unexplored photonic facets of C-based solid-state microphotonic emitters. The proposed synthesis approach focuses on carbonized polymer microspheres (CPMs) instead of conventional nanodots. These microspheres exhibit remarkable SSF spanning the entire visible spectrum from blue to red. The highly spherical shape of CPMs imparts built-in photonic properties in addition to its intrinsic CD-based attributes. Leveraging their excitation-dependent photoluminescence property, these microspheres exhibit amplified spontaneous emission, assisted by the whispering gallery mode resonance across the visible spectral region. Remarkably, unlike conventional semiconductor quantum dots or dye-doped microresonators, this single microstructure showcases adaptable resonant emission without structural/chemical modifications. This distinctive attribute enables a plethora of applications, including microcavity-assisted energy transfer for white light emission, highly sensitive chemical sensing, and secure encrypted anticounterfeiting measures. This interdisciplinary approach, integrating photonics and chemistry, provides a robust solution for light-element-based SSF with inherent photonic functionality and wide-ranging applications.

Crystallization-induced emission from F-doped carbon dots

Herein, F-doped CDs with bright red SSF were synthesized by a solvothermal method using trifluoroethanol as the solvent and m-hydroxybenzaldehyde as the carbon source. Strong F-F interactions are vital for inducing crystallization, and solid luminescence is achieved by blocking the nonradiative energy dissipation pathways of crystalline organizations.

Hydrophobic Mn-Doped Solid-State Red-Emitting Carbon Nanodots with AIE Effect and Their Hydrogel Composites for Color-Changing Anticounterfeiting

The aggregation-caused quenching has always limited the high concentration and solid-state applications of carbon nanodots. While the aggregation-induced emission effect, dominated by intramolecular motion, may be an effective means to solve this problem. Here, hydrophobic solid-state red-light carbon nanodots (M-CDs) with 95% yield are synthesized by a one-step hydrothermal method using 2,2'-dithiodibenzoic acid as the carbon source and manganese acetate as the dopant source. The disulfide bond of 2,2'-dithiodibenzoic acid serves as the symmetry center of molecular rotation and Mn catalyzes the synthesis of M-CDs, which promotes the formation of the central graphitic carbon structure. The M-CDs/agar hydrogel composites can achieve fluorescence transition behavior because of the special fluorescence transition properties of M-CDs. When this composite hydrogel is placed in water, water molecules contact with M-CDs through the network structure of the hydrogels, making the aggregated hydrogels of M-CDs fluorescence orange-red under 365 nm excitation. While in dimethyl sulfoxide, water molecules in the hydrogels network are replaced and the M-CDs fluoresce blue when dispersed, providing a potential application in information encryption. In addition, high-performance monochromatic light-emitting diode (LED) devices are prepared by compounding M-CDs with epoxy resin and coating them on 365 nm LED chips.

The emergence and prospects of carbon dots with solid-state photoluminescence for light-emitting diodes

The significant features of carbon dots (CDs), such as bright and tunable photoluminescence, high thermal stability, and low toxicity, endow them with tremendous potential for application in next generation optoelectronics. Despite great progress achieved in the design of high-performance CDs so far, the practical applications in solid-state lighting and displays have been retarded by the aggregation-caused quenching (ACQ) effect ascribed to direct π-π interactions. This review provides a comprehensive overview of the recent progress made in solid-state CD emitters, including their synthesis, optical properties and applications in light-emitting diodes (LEDs). Their triplet-excited-state-involved properties, as well as their recent advances in phosphor-converted LEDs and electroluminescent LEDs, are mainly reviewed here. Finally, the prospects and challenges of solid-state CD-based LEDs are discussed with an eye on future development. We hope that this review will provide critical insights to inspire new exciting discoveries on solid-state CDs from both fundamental and practical standpoints so that the realization of their potential in optoelectronic areas can be facilitated.

An insight into recent developments of copper, silver and gold carbon dots: cancer diagnostics and treatment

Cancer is one of the most fatal diseases globally, however, advancement in the field of nanoscience specifically novel nanomaterials with nano-targeting of cancer cell lines has revolutionized cancer diagnosis and therapy and has thus attracted the attention of researchers of related fields. Carbon Dots (CDs)-C-based nanomaterials-have emerged as highly favorable candidates for simultaneous bioimaging and therapy during cancer nano-theranostics due to their exclusive innate FL and theranostic characteristics exhibited in different preclinical results. Recently, different transition metal-doped CDs have enhanced the effectiveness of CDs manifold in biomedical applications with minimum toxicity. The use of group-11 (Cu, Ag and Au) with CDs in this direction have recently gained the attention of researchers because of their encouraging results. This review summarizes the current developments of group-11 (Cu, Ag and Au) CDs for early diagnosis and therapy of cancer including their nanocomposites, nanohybrids and heterostructures etc. All The manuscript highlights imaging applications (FL, photoacoustic, MRI etc.) and therapeutic applications (phototherapy, photodynamic, multimodal etc.) of Cu-, Ag- and Au-doped CDs reported as nanotheranostic agents for cancer treatment. Sources of CDs and metals alogwith applications to give a comparative analysis have been given in the tabulated form at the end of manuscript. Further, future prospects and challenges have also been discussed.

A fluorescent magnetic nanosensor for imidacloprid based on the incorporation of polymer dots and Fe3 O4 nanoparticles into the covalent organic framework

A magnetic nanoprobe was designed for imidacloprid by encapsulating nonconjugated polymer dots (NCPDs) and Fe3 O4 nanoparticles in the covalent organic framework (COF). The fluorescence intensity of the COF-based nanocomposite is markedly suppressed by imidacloprid. As the absorption spectrum of imidacloprid was close to the band-gap of the NCPDs, and due to the presence of a nitro group (as an electron acceptor), the electrons can be easily transferred from the conduction band of NCPDs to the LUMO of imidacloprid, so fluorescence quenching was more likely to have been caused by the electron transfer process. The COF-based nanosensor was used for the determination of imidacloprid in the linear range 1.3-130 nM with a detection limit of 1.2 nM. The high sensitivity of the nanoprobe for imidacloprid is due to the combination of COF benefits (accumulation of the imidacloprid into the COF cavities) and the high adsorption ability of the Fe3 O4 nanoparticles, which leads to further enrichment of imidacloprid. The magnetic nature of the nanocomposite enables the preconcentration and easy separation of the analyte, and so reduces matrix interference and lowers the detection limits. The practicality of this nanoprobe was confirmed by quantification of imidacloprid in the wastewater and fruit juice samples.

Pseudomorphic Synthesis of Monodisperse Afterglow Carbon Dot-Doped SiO2 Microparticles for Photonic Crystals

Synthesizing monodisperse afterglow microparticles (MPs) is crucial for creating photonic crystal (PC) platforms with multiple optical states for optoelectronics. However, achieving high uniformity in both size and morphology is challenging for inorganic afterglow MPs using conventional methods. In this contribution, a novel approach for the synthesis of carbon dot (CD)-doped SiO2 MPs with tunable afterglow properties and size distributions is reported. These mechanism studies suggest that the pseudomorphic transformation of SiO2 MPs enables CD doping, providing a hydrogen bond-enriched environment for triplet state stabilization, which generates green afterglow while retaining the uniformity in size and morphology of the parent SiO2 MPs. Furthermore, the utility of CD-doped SiO2 MPs in the fabrication of rationally designed PC patterns is shown using a combined consecutive dip-coating and laser-assisted etching strategy. The pattern displays multiple optical responses under different lighting conditions, including angle-dependent structural colors and blue luminescence under daylight and upon 365-nm irradiation, respectively, as well as time-dependent green afterglow after ceasing UV excitation. The findings pave the way for further controlling the dynamics of spontaneous emissions by PCs to enable complicated optical states for advanced photonics.

Fluorescent Fiber-Shaped Aqueous Zinc-Ion Batteries for Bifunctional Multicolor-Emission/Energy-Storage Textiles

Wearable smart textiles are natural carriers to enable imperceptible and highly permeable sensing and response to environmental conditions via the system integration of multiple functional fibers. However, the existing massive interfaces between different functional fibers significantly increase the complexity and reduce the wearability of the textile system. Thus, it is significant yet challenging to achieve all-in-one multifunctional fibers for realizing miniaturized and lightweight smart textiles with high reliability. Herein, as bifunctional electrolyte additives, fluorescent carbon dots with abundant zincophilic functional groups are introduced into electrolytes to develop fluorescent fiber-shaped aqueous zinc-ion batteries (FFAZIBs). Originating from effective dendrite suppression of Zn anodes and multiple active sites of freestanding Prussian blue cathodes, high energy density (0.17 Wh·cm-3) and long-term cyclability (78.9% capacity retention after 1500 cycles) are achieved for FFAZIBs. More importantly, the one-dimensional structure ensures the same luminance in all directions of FFAZIBs, enabling the form of multicolor display-in-battery textiles.

Single-nucleobase resolution of a surface energy transfer nanoruler for in situ measurement of aptamer binding at the receptor subunit level in living cells

In situ identification of aptamer-binding targets on living cell membrane surfaces is of considerable interest, but a major challenge, specifically, when advancing recognition to the level of membrane receptor subunits. Here we propose a novel nanometal surface energy transfer (NSET) based nanoruler with a single-nucleobase resolution (SN-nanoruler), in which FAM-labeled aptamers and single-sized gold nanoparticle (GNP) antibody conjugates act as a donor and an acceptor. A single nucleobase resolution of the SN-nanoruler was experimentally illustrated by molecular size, orientation, quenching nature, and other dye-GNP pairs. The SN-nanoruler provides high reproducibility and precision for measuring molecule distance on living cell membranes at the nanometer level owing to only the use of single-sized antibody-capped GNPs. In situ identification of the aptamer binding site was advanced to the protein subunit level on the living cell membrane for the utilization of this SN-nanoruler. The results suggest that the proposed strategy is a solid step towards the wider application of optical-based rulers to observe the molecular structural configuration and dynamic transitions on the membrane surface of living cells.

An all-in-one nanoprinting approach for the synthesis of a nanofilm library for unclonable anti-counterfeiting applications

In addition to causing trillion-dollar economic losses every year, counterfeiting threatens human health, social equity and national security. Current materials for anti-counterfeiting labelling typically contain toxic inorganic quantum dots and the techniques to produce unclonable patterns require tedious fabrication or complex readout methods. Here we present a nanoprinting-assisted flash synthesis approach that generates fluorescent nanofilms with physical unclonable function micropatterns in milliseconds. This all-in-one approach yields quenching-resistant carbon dots in solid films, directly from simple monosaccharides. Moreover, we establish a nanofilm library comprising 1,920 experiments, offering conditions for various optical properties and microstructures. We produce 100 individual physical unclonable function patterns exhibiting near-ideal bit uniformity (0.492 ± 0.018), high uniqueness (0.498 ± 0.021) and excellent reliability (>93%). These unclonable patterns can be quickly and independently read out by fluorescence and topography scanning, greatly improving their security. An open-source deep-learning model guarantees precise authentication, even if patterns are challenged with different resolutions or devices.

Single-particle dispersion of carbon dots in the nano-hydroxyapatite lattice achieving solid-state green fluorescence

Carbon dots (CDs), as new carbon nanomaterials, have potential applications in multiple fields due to their superior optical properties, good biocompatibility, and easy preparation. However, CDs are typically an aggregation-caused quenching (ACQ) material, which has a huge limitation on the practical application of CDs. To solve this problem, in this paper, CDs were prepared by the solvothermal method using citric acid and o-phenylenediamine as precursors and dimethylformamide as solvent. Then using CDs as nucleating agents, solid-state green fluorescent CDs were synthesized by in situ growth of nano-hydroxyapatite (HA) crystals on the surface of CDs. The results show that CDs are stably dispersed single-particlely in the form of bulk defects in the nano-HA lattice matrices with a dispersion concentration of 3.10%, and solid-state green fluorescence of CDs is achieved with a stable emission wavelength peak position near 503 nm, which provides a new solution to the ACQ problem. CDs-HA nanopowders were further used as LED phosphors to obtain bright green LEDs. In addition, CDs-HA nanopowders showed excellent performance in cell imaging (mBMSCs and 143B) applications, which provides a new scheme for further applications of CDs in the field of cell imaging and even in vivo imaging.

One-pot synthesis of nitrogen-doped carbonized polymer dots with tunable emission for multicolor light-emitting diodes

Carbonized polymer dots (CPDs) have highly potential application value in the field of optoelectronic devices due to their preferable stability, excellent optical properties and low cost. Here, the nitrogen-doped carbonized polymer dots (HNCDs) with self-quenching-resistant fluorescence were prepared via a simple solvothermal method with citric acid, urea and 2-hydroxyethyl methacrylate (HEMA) as raw materials. The structure and optical properties of the HNCDs have been explored in detail by various contrast experiments. The results show that HEMA form the poly(HEMA) to modify on the surface of carbonized core, which can overcome the quenching effect of carbonized core. The nitrogen doping is crucial for the red shift emission of solid-state HNCDs. Furthermore, the HNCDs exhibit concentration-dependent emission and excellent compatibility with silicone sol, which lead to their emission red shifted from blue to red with increasing concentration. The HNCDs were further applied to construct the light-emitting diodes (LEDs), and the multicolor LEDs ranging from blue to red can be prepared by simply varying the type of chips and adjusting the concentration of HNCDs in encapsulating material.

Formation and Band Gap Tuning Mechanism of Multicolor Emissive Carbon Dots from m-Hydroxybenzaldehyde

Reported in 2004, carbon dots (CDs) have been widely used in various fields due to their excellent optical properties. However, the mechanism of their fluorescence modulation is still a controversial issue, which also seriously affects the further development of carbon dots. In this paper, m-hydroxybenzaldehyde is used as a raw material to obtain multicolor luminescent CDs by pyrolysis under different reaction conditions, thereby revealing the forbidden band tuning and formation mechanism of CDs. Different acid-base conditions lead to different reaction paths of the precursors, forming molecular fluorophores with different conjugated structures, which aggregate to eventually form CDs and further enhance the photoluminescence of the system by inhibiting the movement of the fluorescent centers.

Carbon Dots Based Photoinduced Reactions: Advances and Perspective

Seeking clean energy as an alternative to traditional fossil fuels is the inevitable choice to realize the sustainable development of the society. Photocatalytic technique is considered a promising energy conversion approach to store the abundant solar energy into other wieldy energy carriers like chemical energy. Carbon dots, as a class of fascinating carbon nanomaterials, have already become the hotspots in numerous photoelectric researching fields and particularly drawn keen interests as metal-free photocatalysts owing to strong UV-vis optical absorption, tunable energy-level configuration, superior charge transfer ability, excellent physicochemical stability, facile fabrication, low toxicity, and high solubility. In this review, the classification, microstructures, general synthetic methods, optical and photoelectrical properties of carbon dots are systematically summarized. In addition, recent advances of carbon dots based photoinduced reactions including photodegradation, photocatalytic hydrogen generation, CO2 conversion, N2 fixation, and photochemical synthesis are highlighted in detail, deep insights into the roles of carbon dots in various systems combining with the photocatalytic mechanisms are provided. Finally, several critical issues remaining in photocatalysis field are also proposed.

Multiple Stimuli-Response Polychromatic Carbon Dots for Advanced Information Encryption and Safety

Optical information encryption and safety have aroused great attention since they are closely correlated to data protection and information safety. The development of multiple stimuli-response optical materials for constructing large-capacity information encryption and safety is very important for practical applications. Carbon dots (CDs) have many gratifying merits, such as polychromatic emission, diverse luminous categories, and stable physicochemical properties, and are considered as one of the most ideal candidates for information protection. Herein, carbon core, functional groups, solvents, and other crucial factors are reviewed for outputting polychromatic emission of multiple luminous categories. In particular, substrate engineering strategies have been emphasized for their critical role in yielding excellent optical features of multiple luminous categories. High-capacity information encryption and safety strategies are reviewed by relying on the rich optical properties of CDs, such as polychromatic emission, multiple luminous categories of fluorescence, afterglow, and upconversion, as well as external-stimuli-assisted optical changes. Some perspectives for preparing excellent CDs and further developing information security strategies are proposed. This review provides a good reference for the manipulation of polychromatic CDs and the development of next-generation information encryption and safety.

Solid-State Fluorescent Carbon Dots with Unprecedented Efficiency from Visible to Near-Infrared Region

Developing solid-state luminescent materials with bright long-wavelength emissions is of considerable practical importance in light-emitting diodes (LEDs) but remains a formidable challenge. Here, a novel structure engineering strategy is reported to realize solid-state fluorescence (FL)-emitted carbon dots (CDs) from visible to near-infrared region. This is the first report of such an extended wavelength emission of self-quenching-resistant solid-state CDs. Notably, the quantum yields of these CDs are remarkably improved up to 67.7%, which is the highest value for solid-state CDs. The surface polymer chains of CDs can efficiently suppress the conjugated sp² carbon cores from π-π stacking inducing aggregation caused FL quenching, and the redshift of FL emissions is attributed to narrowing bandgap caused by an enlarged sp² carbon core. Using these CDs as conversion phosphors, the fabrication of white LEDs with adjustable correlated color temperatures of 1882-5019 K is achieved. Moreover, a plant growth LED device is assembled with a blue-LED chip and deep-red/near-infrared-emitted CDs. Compared with sunlight and white LEDs, the peanuts irradiated by plant growth LED lamp show higher growth efficiency in terms of branches and leaves. This work provides high-quality solid-state CD-based phosphors for LED lighting sources that are required for diverse optoelectronic applications.

Carbon dot-based nanomaterials: a promising future nano-platform for targeting tumor-associated macrophages

The tumor microenvironment (TME) is the internal environment that tumors depend on for survival and development. Tumor-associated macrophages (TAMs), as an important part of the tumor microenvironment, which plays a crucial role in the occurrence, development, invasion and metastasis of various malignant tumors and has immunosuppressant ability. With the development of immunotherapy, eradicating cancer cells by activating the innate immune system has yielded encouraging results, however only a minority of patients show a lasting response. Therefore, in vivo imaging of dynamic TAMs is crucial in patient-tailored immunotherapy to identify patients who will benefit from immunotherapy, monitor efficacy after treatment, and identify alternative strategies for non-responders. Meanwhile, developing nanomedicines based on TAMs-related antitumor mechanisms to effectively inhibit tumor growth is expected to become a promising research field. Carbon dots (CDs), as an emerging member of the carbon material family, exhibit unexpected superiority in fluorescence imaging/sensing, such as near infrared imaging, photostability, biocompatibility and low toxicity. Their characteristics naturally integrate therapy and diagnosis, and when CDs are combined with targeted chemical/genetic/photodynamic/photothermal therapeutic moieties, they are good candidates for targeting TAMs. We concentrate our discussion on the current learn of TAMs and describe recent examples of macrophage modulation based on carbon dot-associated nanoparticles, emphasizing the advantages of their multifunctional platform and their potential for TAMs theranostics.

Solvent-Type Passivation Strategy Controls Solid-State Self-Quenching-Resistant Behavior in Sulfur Dots

Treatment of sulfur dots with polyethylene glycol (PEG) has been an efficient way to achieve a high luminescence quantum yield, and such a PEG-related quantum dot (QD)-synthesis strategy has been well documented. However, the polymeric insulating capping layer acting as the "thick shell" will significantly slow down the electron-transfer efficiency and severely hamper its practical application in an optoelectric field. Especially, the employment of synthetic polymers with long alkyl chains or large molecular weights may lead to structural complexity or even unexpected changes of physical characteristics for QDs. Therefore, in sulfur dot preparation, it is a breakthrough to use short-chain molecular species to replace PEG for better control and reproducibility. In this article, a solvent-type passivation (STP) strategy has been reported, and no PEG or any other capping agent is required. The main role of the solvent, ethanol, is to directly react with NaOH, and the generated sodium ethoxide passivates the surface defects. The afforded STP-enhanced emission sulfur dots (STPEE-SDs) possess not only the self-quenching-resistant feature in the solid state but also the extension of fluorescence band toward the wavelength as long as 645 nm. The realization of sulfur dot emission in the deep-red region with a decent yield (8.7%) has never been reported. Moreover, a super large Stokes shift (300 nm, λ_ex = 345 nm, λ_em = 645 nm) and a much longer decay lifetime (109 μs) have been found, and such values can facilitate to suppress the negative influence from background signals. Density functional theory demonstrates that the surface passivation via sodium ethoxide is dynamically favorable, and the spectroscopic insights into emission behavior could be derived from the passivation effect of the sulfur vacancy as well as the charge-transfer process dominated by the highly electronegative ethoxide layer.

The Advance and Critical Functions of Energetic Carbon Dots in Carbon Dioxide Photo/Electroreduction Reactions

As a unique carbon-based nano material, carbon dots (CDs) have attracted great attention because of their special structures and properties, and have been widely used in various fields, such as bio-imaging technology, catalyst design, pollutant degradation, chemical analysis, clean energy development and so on. CDs are used as catalysts or cocatalysts for multiple energy conversion reactions due to their advantages of valid visible light utilization, fast transmission of charge carriers, excellent catalytic activity, and good electrical conductivity. This review first summarizes the basic structure and properties of CDs. The advance and critical functions of energetic CDs in carbon dioxide photo/electroreduction reactions are discussed in detail. Due to the excellent optical absorption, electron transfer properties and good conductivity of CDs, they can enhance catalytic activity and stability effectively. In the end, the existing problems and future development opportunities of CDs-based catalysts in CO₂ reduction reaction are proposed and outlined.

The Emerging Development of Multicolor Carbon Dots

As a relatively new type of fluorescent carbon-based nanomaterials, multicolor carbon dots (MCDs) have attracted much attention because of their excellent biocompatibility, tunable photoluminescence (PL), high quantum yield, and unique electronic and physicochemical properties. The multicolor emission characteristics of carbon dots (CDs) obviously depend on the carbon source precursor, reaction conditions, and reaction environment, which directly or indirectly determines the multicolor emission characteristics of CDs. Therefore, this review is the first systematic classification and summary of multiple regulation methods of synthetic MCDs and reviews the recent research progress in the synthesis of MCDs from a variety of precursor materials such as aromatic molecules, small organic molecules, and natural biomass, focusing on how different regulation methods produce corresponding MCDs. This review also introduces the innovative applications of MCDs in the fields of biological imaging, light-emitting diodes (LEDs), sensing, and anti-counterfeiting due to their excellent PL properties. It is hoped that by selecting appropriate adjustment methods, this review can inspire and guide the future research on the design of tailored MCDs, and provide corresponding help for the development of multifunctional MCDs.

Preparation, Properties, and Application of Lignocellulosic-Based Fluorescent Carbon Dots

Carbon dots (CDs) are a relatively new type of fluorescent carbon material with excellent performance and widespread application. As the most readily available and widely distributed biomass resource, lignocellulosics are a renewable bioresource with great potential. Research into the preparation of CDs with lignocellulose (LC-CDs) has become the focus of numerous researchers. Compared with other carbon sources, lignocellulose is low cost, rich in structural variety, exhibits excellent biocompatibility,^[1] and the structures of CDs prepared by lignin, cellulose, and hemicellulose are similar. This Review summarized research progress in the preparation of CDs from lignocellulosics in recent years and reviewed traditional and new preparation methods, physical and chemical properties, optical properties, and applications of LC-CDs, providing guidance for the formation and improvement of LC-CDs. In addition, the challenges of synthesizing LC-CDs were also highlighted, including the interaction of different lignocellulose components on the formation of LC-CDs and the nucleation and growth mechanism of LC-CDs; from this, current trends and opportunities of LC-CDs were examined, and some research methods for future research were put forward.

Sulfuric-acid-mediated synthesis strategy for multi-colour aggregation-induced emission fluorescent carbon dots: Application in anti-counterfeiting, information encryption, and rapid cytoplasmic imaging

Aggregation-induced emission fluorescent carbon dots (AIE-CDs) have applications in the fields of multi-colour anti-counterfeiting, information encryption, and imaging. In this study, four AIE-CDs (B-AIE-CDs, G-AIE-CDs, Y-AIE-CDs, and O-AIE-CDs) with blue, green, yellow, and orange fluorescence at high concentrations were fabricated using crystal violet as a precursor, solutions with different sulfuric acid concentrations as solvents under different temperatures and reaction times for the first time. The structural properties and fluorescence behaviour of the AIE-CDs were investigated. The results revealed that the sulfuric acid concentration had a significant effect on the fluorescence colour of the AIE-CDs because sulfuric acid can affect the degree of carbonisation, the type and content of nitrogen. Moreover, the reaction temperature and time affected the surface-defect state and the degree of carbonisation of the AIE-CDs, which affected the emission wavelength and quantum yield (QY) of the AIE-CDs. Furthermore, to exploit the unique characteristics (polychromatic aggregation fluorescence and acid-sensitive properties) of the obtained-AIE-CDs, anti-counterfeiting and information encryption methodologies (i.e., acid-stimuli-response producing multi-colour fluorescence) were preliminarily developed. Finally, B-AIE-CDs with a high QY of 43.5% were successfully used for rapid cytoplasmic imaging, demonstrating their applicability in biological fields.

Synthesis of fluorescent organic nano-dots and their application as efficient color conversion layers

Efficient conversion of light from short wavelengths to longer wavelengths using color conversion layers (CCLs) underpins the successful operation of numerous contemporary display and lighting technologies. Inorganic quantum dots, based on CdSe or InP, for example, have received much attention in this context, however, suffer from instability and toxic cadmium or phosphine chemistry. Organic nanoparticles (NPs), though less often studied, are capable of very competitive performance, including outstanding stability and water-processability. Surfactants, which are critical in stabilizing many types of nano-structures, have not yet been used extensively in organic NPs. Here we show the utility of surfactants in the synthesis and processing of organic NPs by thoroughly characterizing the effect of ionic and non-ionic surfactants on the properties of fluorescent organic NPs. Using this information, we identify surfactant processing conditions that result in nearly 100 % conversion of organic fluorophores into sub-micrometer particles, or nano-dots, with outstanding performance as CCLs. Such water dispersions are environmentally benign and efficiently convert light. They can be used for a range of fluorophores covering a full spectral gamut, with excellent color purity, including full-width at half-maximum (FWHM) values as low as 21 nm. Compared to inorganic (InP) reference CCLs, the organic nano-dot based CCLs show superior color conversion efficiency and substantially improved long-term stability.

Mulberry-Leaves-Derived Red-Emissive Carbon Dots for Feeding Silkworms to Produce Brightly Fluorescent Silk

Fluorescent silk has promising applications in dazzling textiles, biological engineering, and medical products, but the natural Bombyx mori silk has almost no fluorescence. Here carbon dots (CDs) made from mulberry leaves are reported, which have a strong near-infrared fluorescence with absolute quantum yield of 73% and a full width at half maximum of 20 nm. After feeding with such CDs, silkworms exhibit bright red fluorescence, grow healthily, cocoon normally, and turn to moths finally. The cocoons are pink in daylight and show bright red fluorescence under ultraviolet light. After breaking out of such cocoons, the red-emissive moths can mate and lay fluorescent eggs which would hatch normally. The growth cycle of the second generation of the test silkworm is the same as that of the control group, which means such CDs have excellent biocompatiblility. Dissection and analyses on both the test silkworms and cocoons disclose the metabolic route of the CDs, that is, the fluorescent CDs are absorbed by silkworms from alimentary canals, then transferred to silk glands, and finally to cocoons, while those unabsorbed CDs are excreted with the feces. All experimental results confirm the excellent biocompatibility and fluorescence stability of such CDs.

Rational Synthesis of Solid-State Ultraviolet B Emitting Carbon Dots via Acetic Acid-Promoted Fractions of sp3 Bonding Strategy

Carbon dots (CDs) have received tremendous attention for their excellent photoluminescence (PL) properties. However, it remains a great challenge to obtain CDs with ultraviolet (UV, 200-400 nm) emission in solid state, which requires strict control of the CDs structure and overcoming the aggregation-caused quenching (ACQ). Herein, a new sp³ compartmentalization strategy is developed to meet these requirements, by employing acetic acid to promote fractions of sp³ bonding during the synthesis of CDs. It markedly decreases the size of sp² conjugating units in the CDs, and shifts PL emission to the ultraviolet B (UVB) region (λ_max  = 308 nm). Moreover, sp² domains are well spatially compartmentalized by sp³ domains and the ACQ effect is minimized, enabling the high quantum yield in solid state (20.2%, λ_ex  = 265 nm) with a narrow bandwidth of 24 nm and environmental robustness. The solid-state UVB emissive CDs are highly desired for application in photonic devices. Hence, a demo of UVB light-emitting diodes is fabricated for plant lighting, leading to a 29% increase of ascorbic acid content in the basil. Overall, a rational and efficient way to construct solid UVB-CDs phosphors for wide applications is provided.

Soft-Hard Segment Combined Carbonized Polymer Dots for Flexible Optical Film with Superhigh Surface Hardness

The rapid development of optical and electronic devices has driven up the demand of high performance optical protective films to avoid exterior influence and extend the service life. But it is not easy to obtain an ideal coating film with high transmittance, high hardness, and good flexibility. Herein, by taking advantage of the special core-shell structure of carbonized polymer dots (CPDs), we propose a strategy to build up a nanoscale soft-hard segment microstructure for optical protective coating materials. The CPDs with hard core and soft polymer chain shell are prepared from citric acid and (3-aminopropyl)triethoxysilane. The as-prepared CPDs can be converted directly to the coating film by the dehydration and cross-linking. In addition to the good optical transmittance, the final film exhibits simultaneously ultrahigh 9H pencil hardness to stand 4000 cycles of a steel-wool wear test, and excellent flexibility to stand bending and rolling-up.

Solution-processable carbon dots with efficient solid-state red/near-infrared emission

Carbon dots (CDs) emerge as promising luminescent materials for potential applications in optoelectronics on basis of their merits including low cost, eco-friendliness and strong, color-tunable photoluminescence (PL). However, the research on solid-state emissive CDs is still at the primary stage because of the aggregation-caused quenching (ACQ) of PL and their poor film-formation ability. In this work, we produce CDs with branched-polyethylenimine (b-PEI) chemically functionalized on the surfaces. The thus newly synthesized P-CDs successfully overcome the bottleneck of ACQ effect and display efficient red and NIR emission in aggregate state. Under the excitation of 520 nm, a strong red emission (maxima of 640 nm) with a high photoluminescence quantum yield (PLQY) of 21% was observed for the P-CDs in neat film. Moreover, this design strategy endows the P-CDs with good film-formation ability via solution spin-coating, which significantly increases its value for the film-based optoelectronic devices.

Fluorescence Enhancement of Lignin-Based Carbon Quantum Dots by Concentration-Dependent and Electron-Donating Substituent Synergy and Their Cell Imaging Applications

Black liquor is an important pollutant in the pulp industry, but it also has the potential for high-value utilization. In this study, lignin extracted from black liquor was hydrothermally prepared into lignin-based carbon quantum dots (L-CQDs) using a one-pot method. Physicochemical characterization suggested that the L-CQDs exhibited a lamellar core-shell multilayered graphene structure surrounded by oxygen-containing functional groups. The fluorescence intensity of the L-CQDs was strengthened depending on their own concentration dependence and the doping of external groups. The fluorescence intensity of L-CQDs varied between 89.09 and 183.66 under different concentrations, and the most intense fluorescence (183.66) was obtained at 0.1 mg mL^-1. At hydroxyl and amino adsorption capacities of 11.08 and 0.98 mmol g^-1, the hydroxylated RL-CQDs-5 and aminated NL-CQDs-3 exhibited the highest fluorescence intensities at 689.22 and 605.39, respectively. Moreover, when pristine L-CQDs were sequentially aminated and hydroxylated, the NRL-CQDs' fluorescence intensity reached 1224.92. Cell imaging experiments proved that cells cultivated with NRL-CQDs have brighter fluorescence compared with L-CQDs. The results will render L-CQDs more suitable for practical applications.

Carbon dots for cancer nanomedicine: a bright future

Cancer remains one of the main causes of death in the world. Early diagnosis and effective cancer therapies are required to treat this pathology. Traditional therapeutic approaches are limited by lack of specificity and systemic toxicity. In this scenario, nanomaterials could overcome many limitations of conventional approaches by reducing side effects, increasing tumor accumulation and improving the efficacy of drugs. In the past few decades, carbon nanomaterials (i.e., fullerenes, carbon nanotubes, and carbon dots) have attracted significant attention of researchers in various scientific fields including biomedicine due to their unique physical/chemical properties and biological compatibility and are among the most promising materials that have already changed and will keep changing human life. Recently, because of their functionalization and stability, carbon nanomaterials have been explored as a novel tool for the delivery of therapeutic cancer drugs. In this review, we present an overview of the development of carbon dot nanomaterials in the nanomedicine field by focusing on their synthesis, and structural and optical properties as well as their imaging, therapy and cargo delivery applications.

A facile co-crystallization approach to fabricate two-component carbon dot composites showing time-dependent evolutive room temperature phosphorescence colors

Time-dependent evolutive afterglow materials can increase the security level by providing additional encryption modes in anti-counterfeiting and data encryption. The design of carbon-based materials with dynamic afterglow colors is attractive but formidably challenging. In this study, a facile two-component co-crystallization strategy is designed for the first time to obtain N,S-co-doped carbon dots@isophthalic acid (CDs@IPA) and N,S-co-doped carbon dots@melamine (CDs@MA). CDs@IPA and CDs@MA all exhibiting time-dependent evolutive RTP colors from orange via yellow to green over 1 s, especially that the green afterglow time of CDs@IPA can reach 6 s (τ avg = 582 ms). Studies show that the time-dependent RTP colors originated from two primary emissive centers, low-energy emission of CDs and high-energy emission of host matrix activated by CDs. Due to their distinguishable RTP colors with differentiated lifetimes, the ratios of two RTP emissive bands changed with time during the decay process, resulting in the continuous RTP colors variation in real-time. This two-component carbon dot-based co-crystallization strategy may open a new avenue for the development of time-dependent afterglow color materials.

Nanoscale Carbon-Polymer Dots for Theranostics and Biomedical Exploration

In recent years, new carbonized nanomaterials have emerged in imaging, sensing, and various biomedical applications. Published literature shows that carbon dots (CDs) have been explored more extensively than any other nanomaterials. However, its polymeric version, carbon polymer dots (CPDs), did not get much attention. The non-conjugated and single-particle CPDs have all the merits of polymer and CDs, such as photoluminescent properties. The partially carbonized CPDs can be applied like CDs without surface passivation and functionalization. This merit can be further enhanced through the selection of desired precursors and control of carbonization synthesis. CPDs can absorb UV-visible-NIR light and can enhance the photoresponsive chemical and biochemical interactions. This review aims to introduce this area of renewed interest and provide insights into current developments of CPDs nanoparticles and present an overview of chemical, biological, and therapeutic applications.