Imaging Inelastic Fracture Processes in Biomimetic Nanocomposites and Nacre by Laser Speckle for Better Toughness

Multi-layered cement-hydrogel composite with high toughness, low thermal conductivity, and self-healing capability

The inherent quasi-brittleness of cement-based materials, due to the disorder of their hydration products and pore structures, present significant challenges for directional matrix toughening. In this work, a rigid layered skeleton of cement slurry was prepared using a simplified ice-template method, and subsequently flexible polyvinyl alcohol hydrogel was introduced into the unidirectional pores between neighboring cement platelets, resulting in the formation of a multi-layered cement-based composite. A toughness improvement of over 175 times is achieved by the implantation of such hard-soft alternatively layered microstructure. The toughening mechanism is the stretching of hydrogels at the nano-scale and deflections of micro-cracks at the interfaces, which avoid stress concentration and dissipate huge energy. Furthermore, this cement-hydrogel composite also exhibits a low thermal conductivity (around 1/10 of normal cement) and density, high specific strength and self-healing properties, which can be used in thermal insulation, seismic high-rise buildings and long-span bridges.

CaCO3 Crystals with Unique Morphologies Controlled by the Hydrogen-Bonded Supramolecular Assemblies of Ureido-Pyrimidinone-Amino Acid Derivatives

Biomineral materials such as nacre of shells exhibit high mechanical strength and toughness on account of their unique "brick-mortar" multilayer structure. 2-Ureido-4[1H]-pyrimidinone (UPy) derivatives with different types of end groups, due to the self-complementary quadruple hydrogen bonds and abundant Ca²⁺ binding sites, can easily self-assemble into supramolecular aggregates and act as templates and skeleton in the process of inducing mineral crystallization. In this work, UPy derivatives were used as templates to induce the mineralization and growth of CaCO₃ through a CO₂ diffusion method. The morphology of CaCO₃ crystals was modulated and analyzed by adjusting the synthesizing parameters including Ca²⁺ concentration, pH, and end groups. The results showed that, by the regulatory role of the mineralization template, it was easier to realize the multilayer crystal structure at a lower concentration of Ca²⁺ (less than 0.01 mol L^-1). Under alkaline regulation, the quadruple hydrogen bonds would be destroyed, and the template's regulation effect on the morphology of CaCO₃ crystals would be weakened. Moreover, by comparing different types of end groups, it was proven that the UPy derivatives with carboxylic acid groups (-COOH) played a crucial role in the process of CaCO₃ crystallization with unique morphologies.

Interfacial Mechanical Behavior in Nacre of Red Abalone and Other Shells: A Review

Interfaces between nacreous tablets are crucial to the outstanding mechanical properties of nacre in natural shells. Excellent research has been conducted to probe the effect of interfaces on strength and toughness of nacre, providing critical guidelines for the design of human-made laminated composites. This article reviews recent studies on interfacial mechanical behavior of nacre in red abalone and other shells, including experimental methods, analytical and numerical modeling. The discussions focus on the mechanical properties of dry and hydrated nacreous microstructures. The review concludes with discussions on representative studies of nacre-like composites with interfaces tuned using multiple approaches, and provides an outlook on improving the performance of composites with better interfacial controls.

A Bioinspired Ultratough Composite Produced by Integration of Inorganic Ionic Oligomers within Polymer Networks

The nacre-inspired laminates are promising materials for their excellent mechanics. However, the interfacial defects between organic-inorganic phases commonly lead to the crack propagation and fracture failure of these materials under stress. A natural biomineral, bone, has much higher bending toughness than the nacre. The small size of inorganic building units in bone improves the organic-inorganic interaction, which optimizes the material toughness. Inspired by these biological structures, here, an ultratough nanocomposite laminate is prepared by the integration of ultrasmall calcium phosphate oligomers (CPO, 1 nm in diameter) within poly(vinyl alcohol) (PVA) and sodium alginate (Alg) networks through a simple three-step strategy. Owing to the small size of inorganic building units, strong multiple molecular interactions within integrated organic-inorganic hierarchical structure are built. The resulting laminates exhibit ultrahigh bending strain (>50% without fracture) and toughness (21.5-31.0 MJ m^-3), which surpass natural nacre and almost all of the synthetic laminate materials that have been reported so far. Moreover, the mechanics of this laminate is tunable by changing the water content within the bulk structure. This work provides a way for the development of organic-inorganic nanocomposites with ultrahigh bending toughness by using inorganic ionic oligomers, which can be useful in the fields of tough protective materials and energy absorbing materials.

Nanoscale-Structured Hybrid Bragg Stacks with Orientation- and Composition-Dependent Mechanical and Thermal Transport Properties: Implications for Nacre Mimetics and Heat Management Applications

Layered nanomaterials fascinate researchers for their mechanical, barrier, optical, and transport properties. Nacre is a biological example thereof, combining excellent mechanical properties by aligned submicron inorganic platelets and nanoscale proteinic interlayers. Mimicking nacre with advanced nanosheets requires ultraconfined organic layers aimed at nacre-like high reinforcement fractions. We describe inorganic/polymer hybrid Bragg stacks with one or two fluorohectorite clay layers alternating with one or two poly(ethylene glycol) layers. As indicated by X-ray diffraction, perfect one-dimensional crystallinity allows for homogeneous single-phase materials with up to a 84% clay volume fraction. Brillouin light spectroscopy allows the exploration of ultimate mechanical moduli without disturbance by flaws, suggesting an unprecedentedly high Young's modulus of 162 GPa along the aligned clays, indicating almost ideal reinforcement under these conditions. Importantly, low heat conductivity is observed across films, κ_⊥ = 0.11-0.15 W m^-1 K^-1, with a high anisotropy of κ_∥/κ_⊥ = 28-33. The macroscopic mechanical properties show ductile-to-brittle change with an increase in the clay volume fraction from 54% to 70%. Conceptually, this work reveals the ultimate elastic and thermal properties of aligned layered clay nanocomposites in flaw-tolerant conditions.

Heterogeneous nucleation of creases in swelling polymer gels

Surface creasing is a common occurrence in gels under strong enough compression. The transition from smooth to creased surface has been well studied in equilibrium conditions and applied to achieve stimuli-responsive properties. Classical predictions of the creased state, assuming the gel is at equilibrium and homogeneous, are generally satisfactory, while the transient behavior in swelling gels is often far from equilibrium and is commonly heterogeneous. The short-time response is essential for materials in dynamic environments, but it remains unreported and largely unknown due to the limited temporal resolution of the techniques used so far. Here, we use spatially resolved multispeckle diffusing wave spectroscopy (MSDWS) with submicrosecond time resolution to measure the spatially dependent swelling and creasing of a constrained poly (vinyl alcohol) chemical gel in borax solutions of varying concentrations. Our high-speed imaging by MSDWS shows that the swelling behavior and mechanical response at the microscopic level can be highly heterogeneous in time and space, and is detectable hundreds of seconds before the corresponding macroscopic creasing transition. This unprecedented visualization of the heterogeneous and time-dependent behavior beyond equilibrium morphological changes unveils the full complexity of the transient material response after exposure to external stimuli and sheds light on the formation mechanism of metastable states in transient processes.

Hierarchical Assembly of Atomically Precise Metal Clusters as a Luminescent Strain Sensor

We demonstrate the formation of a versatile luminescent organo-inorganic layered hybrid material, composed of bovine serum albumin (BSA)-protected Au₃₀ clusters and aminoclay sheets. X-ray diffraction revealed the intercalation of Au₃₀@BSA in the layered superstructure of aminoclay sheets. Coulombic attraction of the clusters and the clay initiates the interaction, and the appropriate size of the clusters allowed them to intercalate within the lamellar aminoclay galleries. Electron microscopy measurements confirmed the hierarchical structure of the material and also showed the cluster-attached clay sheets. Zeta potential measurement and dynamic light scattering probed the gradual formation of the ordered aggregates in solution. The hybrid material could be stretched up to 300% without fracture. The emergence of a new peak in the luminescence spectrum was observed during the course of mechanical stretching. This peak increased in intensity gradually with the degree of elongation or strain of the material. A mechanochromic luminescence response was further demonstrated with a writing experiment on a luminescent mat of the material, made by electrospinning.

Electroplasticization of Liquid Crystal Polymer Networks

Shape-shifting liquid crystal networks (LCNs) can transform their morphology and properties in response to external stimuli. These active and adaptive polymer materials can have impact in a diversity of fields, including haptic displays, energy harvesting, biomedicine, and soft robotics. Electrically driven transformations in LCN coatings are particularly promising for application in electronic devices, in which electrodes are easily integrated and allow for patterning of the functional response. The morphing of these coatings, which are glassy in the absence of an electric field, relies on a complex interplay between polymer viscoelasticity, liquid crystal order, and electric field properties. Morphological transformations require the material to undergo a glass transition that plasticizes the polymer sufficiently to enable volumetric and shape changes. Understanding how an alternating current can plasticize very stiff, densely cross-linked networks remains an unresolved challenge. Here, we use a nanoscale strain detection method to elucidate this electric-field-induced devitrification of LCNs. We find how a high-frequency alternating field gives rise to pronounced nanomechanical changes at a critical frequency, which signals the electrical glass transition. Across this transition, collective motion of the liquid crystal molecules causes the network to yield from within, leading to network weakening and subsequent nonlinear expansion. These results unambiguously prove the existence of electroplasticization. Fine-tuning the induced emergence of plasticity will not only enhance the surface functionality but also enable more efficient conversion of electrical energy into mechanical work.

Kinking and cracking behavior in nacre under stepwise compressive loading

The damage evolution of nacre under compressive loading has not been well understood, despite numerous investigations on its compressive behavior. In the present work, quasi-in-situ loading-unloading-reloading stepwise compressive tests were performed on nacre in Pinctada maxima shell, which exhibits a distinctive gradient feature with the thickness of platelets decreasing from the external to internal parts. In the loading direction parallel to the platelets, multiple microcracks and kink bands can absorb much deformation energy, leading to a graceful failure. Kinking only occurs at the final stage of fracture process, and it thus has no obvious influence on the strength of nacre, but contributes to a much larger strain. In the loading direction perpendicular to the platelets, nacre exhibits concurrently much higher compressive strength and fracture strain, as the damage can be effectively restricted. This is attributed to the presence of gradient structure, which disperses the stress concentration in front of the crack tip, and arouses the toughening mechanisms including damage localization and crack deflection. The findings obtained in this study are expected to provide fundamental insights into the design of bio-inspired advanced engineering materials.

Morphing of liquid crystal surfaces by emergent collectivity

Liquid crystal surfaces can undergo topographical morphing in response to external cues. These shape-shifting coatings promise a revolution in various applications, from haptic feedback in soft robotics or displays to self-cleaning solar panels. The changes in surface topography can be controlled by tailoring the molecular architecture and mechanics of the liquid crystal network. However, the nanoscopic mechanisms that drive morphological transitions remain unclear. Here, we introduce a frequency-resolved nanostrain imaging method to elucidate the emergent dynamics underlying field-induced shape-shifting. We show how surface morphing occurs in three distinct stages: (i) the molecular dipoles oscillate with the alternating field (10-100 ms), (ii) this leads to collective plasticization of the glassy network (~1 s), (iii) culminating in actuation of the topography (10-100 s). The first stage appears universal and governed by dielectric coupling. By contrast, yielding and deformation rely on a delicate balance between liquid crystal order, field properties and network viscoelasticity.

Graphene-based advanced nanoplatforms and biocomposites from environmentally friendly and biomimetic approaches

Environmentally friendly and biomimetic approaches to fabricate graphene-based advanced nanoplatforms and biocomposites for biomedical applications are summarized in this review.

The role of water in the initial sliding of nacreous tablets: Findings from the torsional fracture of dry and hydrated nacre

Nacre exhibits remarkable mechanical properties resulting from its hierarchical brick-and-mortar structures. By using pure shear stresses of torsion, we demonstrate how nacre resists the initial tablet sliding by tuning its nanoscale toughening mechanisms in dry and hydrated conditions. In hydrated nacre, hydrogen bonds between water molecules and organic matrices provide temporal paths for stress redistributions, through which the shear resistance is gradually transferred from mineral bridges to contacted nanoasperities. In the subsequent sliding, dynamical interactions between nacreous tablets enable substantial plasticity before the catastrophic failure of hydrated nacre. Our findings should help pursuing further insights into the interfacial behavior of natural and artificial laminated nanomaterials under different conditions.

Phase transitions in polymorphic materials probed using space-resolved diffusing wave spectroscopy

We use space-resolved dynamic light scattering in the highly multiple scattering regime (Photon Correlation Imaging Diffusing Wave Spectroscopy, PCI-DWS) to investigate temperature-induced phase transitions in polymorphic materials. We study paraffin wax as a simple model system and chocolate, a prototypical example of fat-based products exhibiting complex, history-dependent phase transitions. We find that microscopic dynamics measured using PCI-DWS show remarkable, non-monotonic behavior upon heating: they transiently accelerate when crossing phase transition and slow down above the transition temperature. Sub-micron resolution measurements of the local drift of the sample surface reveal that the speed-up of the dynamics is due to the strain field induced by the change in density at transition temperature. The transition temperatures obtained from PCI-DWS are found to be in excellent agreement with those inferred from complementary differential scanning calorimetry and X-ray scattering experiments, thereby validating PCI-DWS as a new, powerful tool for the characterization of phase transitions in complex soft matter. Finally, we demonstrate the unique possibilities afforded by space-resolved DWS by investigating the spatially heterogeneous response of poorly manufactured or composite chocolate samples.

Laser Speckle Strain Imaging reveals the origin of delayed fracture in a soft solid

Stresses well below the critical fracture stress can lead to highly unpredictable delayed fracture after a long period of seemingly quiescent stability. Delayed fracture is a major threat to the lifetime of materials, and its unpredictability makes it difficult to prevent. This is exacerbated by the lack of consensus on the microscopic mechanisms at its origin because unambiguous experimental proof of these mechanisms remains absent. We present an experimental approach to measure, with high spatial and temporal resolution, the local deformations that precipitate crack nucleation. We apply this method to study delayed fracture in an elastomer and find that a delocalized zone of very small strains emerges as a consequence of strongly localized damage processes. This prefracture deformation zone grows exponentially in space and time, ultimately culminating in the nucleation of a crack and failure of the material as a whole. Our results paint a microscopic picture of the elusive origins of delayed fracture and open the way to detect damage well before it manifests macroscopically.