A Near-Infrared Photoactive Morphology Modifier Leads to Significant Current Improvement and Energy Loss Mitigation for Ternary Organic Solar Cells

Tackling Energy Loss in Organic Solar Cells via Volatile Solid Additive Strategy

The energy loss induced open-circuit voltage (VOC) deficit hampers the rapid development of state-of-the-art organic solar cells (OSCs), therefore, it is extremely urgent to explore effective strategies to address this issue. Herein, a new volatile solid additive 1,4-bis(iodomethyl)cyclohexane (DIMCH) featured with concentrated electrostatic potential distribution is utilized to act as a morphology-directing guest to reduce energy loss in multiple state-of-art blend system, leading to one of highest efficiency (18.8%) at the forefront of reported binary OSCs. Volatile DIMCH decreases radiative/non-radiative recombination induced energy loss (ΔE2/ΔE3) by rationally balancing the crystallinity of donors and acceptors and realizing homogeneous network structure of crystal domain with reduced D-A phase separation during the film formation process and weakens energy disorder and trap density in OSCs. It is believed that this study brings not only a profound understanding of emerging volatile solid additives but also a new hope to further reduce energy loss and improve the performance of OSCs.

Dual Function of the Third Component in Ternary Organic Solar Cells: Broaden the Spectrum and Optimize the Morphology

Ternary organic solar cells (T-OSCs) have attracted significant attention as high-performance devices. In recent years, T-OSCs have achieved remarkable progress with power conversion efficiency (PCE) exceeding 19%. However, the introduction of the third component complicates the intermolecular interaction compared to the binary blend, resulting in poor controllability of active layer and limiting performance improvement. To address these issues, dual-functional third components have been developed that not only broaden the spectral range but also optimize morphology. In this review, the effect of the third component on expanding the absorption range of T-OSCs is first discussed. Second, the extra functions of the third component are introduced, including adjusting the crystallinity and molecular stack in active layer, regulating phase separation and purity, altering molecular orientation of the donor or acceptor. Finally, a summary of the current research progress is provided, followed by a discussion of future research directions.

Highly Efficient Ternary Near-Infrared Organic Photodetectors for Biometric Monitoring

Near-infrared (NIR) small-molecule acceptors that absorb at wavelengths of up to 1000 nm are attractive for applications in organic photodetectors (OPDs) and biometrics. In this study, we incorporated IEICO-4F as the third component for PffBT4T-2OD:PC₇₁BM-based OPDs to provide an efficient NIR response while greatly suppressing the leakage current at reverse bias. By varying the blend ratio and thickness (250-600 nm), we obtained an NIR OPD displaying an ultralow dark-current density (J_D = 2.62 nA cm^-2), ultrahigh detectivity [D* = 7.2 × 10¹² Jones (850 nm)], high sensitivity, and photoresponsivity covering the region from the ultraviolet to the NIR. We used tapping-mode atomic force microscopy, optical microscopy, grazing-incidence wide-angle X-ray scattering, and contact angle measurements to investigate the effect of IEICO-4F on the performance of the ternary OPDs. The low compatibility of PffBT4T-2OD and IEICO-4F, originating from weak intermolecular interactions, allowed us to manipulate the degree of phase separation between the donor and acceptor in the ternary blends, leading to an optimized blend morphology featuring efficient charge separation, transport, and collection. To demonstrate its applicability, we integrated our OPD with two light-emitting diodes and used the system for precisely calculated transmissive pulse oximetry.

Ternary Blend Organic Solar Cells: Understanding the Morphology from Recent Progress

Ternary blend organic solar cells (TB-OSCs) incorporating multiple donor and/or acceptor materials into the active layer have emerged as a promising strategy to simultaneously improve the overall device parameters for realizing higher performances than binary devices. Whereas introducing multiple materials also results in a more complicated morphology than their binary blend counterparts. Understanding the morphology is crucially important for further improving the device performance of TB-OSC. This review introduces the solubility and miscibility parameters that affect the morphology of ternary blends. Then, this review summarizes the recent processes of morphology study on ternary blends from the aspects of molecular crystallinity, molecular packing orientation, domain size and purity, directly observation of morphology, vertical phase separation as well as morphological stability. Finally, summary and prospects of TB-OSCs are concluded.

Achieving and Understanding of Highly Efficient Ternary Organic Photovoltaics: From Morphology and Energy Loss to Working Mechanism

Ternary strategy, adding an additional donor (D) or acceptor (A) into conventional binary D:A blend, has shown great potential in improving photovoltaic performances of organic photovoltaics (OPVs) for practical applications. Herein, this review is presented on how efficient ternary OPVs are realized from the aspects of morphology, energy loss, and working mechanism. As to morphology, the role of third component on the formation of preferred alloy-like-phase and vertical-phase, which are driven by the miscibility tuning, is discussed. For energy loss, the effect of the third component on the luminescence enhancement and energetic disordering suppression, which lead to favorable increase of voltage, is presented. Regarding working mechanism, dilution effect and relationships between two acceptors or donor/acceptor, which explain the observed device parameters variations, are analyzed. Finally, some future directions concerning ternary OPVs are pointed out. Therefore, this review can provide a comprehensive understanding of working principles and effective routes for high-efficiency ternary systems, advancing the commercialization of OPVs.

Single-Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor

The ternary strategy has been widely identified as an effective approach to obtain high-efficiency organic solar cells (OSCs). However, for most ternary OSCs, the nonradiative voltage loss lies between those of the two binary devices, which limits further efficiency improvements. Herein, an asymmetric guest acceptor BTP-2F2Cl is designed and incorporated into a PM1:L8-BO host blend. Compared with the L8-BO neat film, the L8-BO:BTP-2F2Cl blend film shows higher photoluminescence quantum yield and larger exciton diffusion length. Introducing BTP-2F2Cl into the host blend extends its absorption spectrum, improves the molecular packing of host materials, and suppresses the nonradiative charge recombination of the ternary OSCs. Consequently, the power conversion efficiency is improved up to 19.17% (certified value 18.7%), which represents the highest efficiency value reported for single-junction OSCs so far. The results show that improving the exciton behaviors is a promising approach to reducing the nonradiative voltage loss and realizing high-performance OSCs.

Role of Electronic States and Their Coupling on Radiative Losses of Open-Circuit Voltage in Organic Photovoltaics

Voltage losses (ΔV_OC) are a crucial limitation for the performance of excitonic organic solar cells (OSCs) and can be estimated by two approaches─the radiative limit and the Marcus charge-transfer (MCT) model. In this work, we show that combining the radiative limit and MCT models for voltage loss calculations provides useful insights into the physics of emerging efficient OSCs. We studied nine different donor-acceptor systems, wherein the power conversion efficiency ranges from 4.4 to 14.1% and ΔV_OC varies from 0.55 to 0.95 V. For these state-of-the-art devices, we calculated the ΔV_OC using the radiative limit and the MCT model. Furthermore, we combined both models to derive new insights on the origin of radiative voltage losses (ΔV_rad) in OSCs. We quantified the contribution in ΔV_rad due to the bulk intramolecular (S₁) disorder and interfacial intermolecular (CT) disorder by revisiting the spectral regions of interest for OSCs. Our findings are in agreement with the expected relationship of V_OC with Urbach energy (E_U), which suggests that the low E_U is beneficial for reduced losses. However, unprecedentedly, we also identify a universal, almost linear relationship between the interfacial disorder (λ) and ΔV_rad. We believe that these results can be exploited by the organic photovoltaic (OPV) community for the design of new molecules and a combination of donor-acceptors to further improve OSCs.

Organic Solar Cells with 18% Efficiency Enabled by an Alloy Acceptor: A Two-in-One Strategy

The trade-off between the open-circuit voltage (V_oc ) and short-circuit current density (J_sc ) has become the core of current organic photovoltaic research, and realizing the minimum energy offsets that can guarantee effective charge generation is strongly desired for high-performance systems. Herein, a high-performance ternary solar cell with a power conversion efficiency of over 18% using a large-bandgap polymer donor, PM6, and a small-bandgap alloy acceptor containing two structurally similar nonfullerene acceptors (Y6 and AQx-3) is reported. This system can take full advantage of solar irradiation and forms a favorable morphology. By varying the ratio of the two acceptors, delicate regulation of the energy levels of the alloy acceptor is achieved, thereby affecting the charge dynamics in the devices. The optimal ternary device exhibits more efficient hole transfer and exciton separation than the PM6:AQx-3-based system and reduced energy loss compared with the PM6:Y6-based system, contributing to better performance. Such a "two-in-one" alloy strategy, which synergizes two highly compatible acceptors, provides a promising path for boosting the photovoltaic performance of devices.

Fluorination Enables Tunable Molecular Interaction and Photovoltaic Performance in Non-Fullerene Solar Cells Based on Ester-Substituted Polythiophene

Owing to the advantages of low synthetic cost and high scalability of synthesis, polythiophene and its derivatives (PTs) have been of interest in the community of organic photovoltaics (OPVs). Nevertheless, the typical efficiency of PT based photovoltaic devices reported so far is much lower than those of the prevailing push-pull type conjugated polymer donors. Recent studies have underscored that the excessively low miscibility between PT and nonfullerene acceptor is the major reason accounting for the unfavorable active layer morphology and the inferior performance of OPVs based on a well-known PT, namely PDCBT-Cl and a non-halogenated nonfullerene acceptor IDIC. How to manipulate the miscibility between PT and acceptor molecule is important for further improving the device efficiency of this class of potentially low-cost blend systems. In this study, we introduced different numbers of F atoms to the end groups of IDIC to tune the intermolecular interaction of the hypo-miscible blend system (PDCBT-Cl:IDIC). Based on calorimetric, microscopic, and scattering characterizations, a clear relationship between the number of F atoms, miscibility, and device performance was established. With the increased number of F atoms in IDIC, the resulting acceptors exhibited enhanced miscibility with PDCBT-Cl, and the domain sizes of the blend films were reduced substantially. As a result, distinctively different photovoltaic performances were achieved for these blend systems. This study demonstrates that varying the number of F atoms in the acceptors is a feasible way to manipulate the molecular interaction and the film morphology toward high-performance polythiophene:nonfullerene based OPVs.

Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18

Obtaining a finely tuned morphology of the active layer to facilitate both charge generation and charge extraction has long been the goal in the field of organic photovoltaics (OPVs). Here, a solution to resolve the above challenge via synergistically combining the layer-by-layer (LbL) procedure and the ternary strategy is proposed and demonstrated. By adding an asymmetric electron acceptor, BTP-S2, with lower miscibility to the binary donor:acceptor host of PM6:BO-4Cl, vertical phase distribution can be formed with donor-enrichment at the anode and acceptor-enrichment at the cathode in OPV devices during the LbL processing. In contrast, LbL-type binary OPVs based on PM6:BO-4Cl still show bulk-heterojunction like morphology. The formation of the vertical phase distribution can not only reduce charge recombination but also promote charge collection, thus enhancing the photocurrent and fill factor in LbL-type ternary OPVs. Consequently, LbL-type ternary OPVs exhibit the best efficiency of 18.16% (certified: 17.8%), which is among the highest values reported to date for OPVs. The work provides a facile and effective approach for achieving high-efficiency OPVs with expected morphologies, and demonstrates the LbL-type ternary strategy as being a promising procedure in fabricating OPV devices from the present laboratory study to future industrial production.

Coupling molecular rigidity and flexibility on fused backbones for NIR-II photothermal conversion

Great attention is being increasingly paid to photothermal conversion in the near-infrared (NIR)-II window (1000-1350 nm), where deeper tissue penetration is favored. To date, only a limited number of organic photothermal polymers and relevant theory have been exploited to direct the molecular design of polymers with highly efficient photothermal conversion, specifically in the NIR-II window. This work proposes a fused backbone structure locked via an intramolecular hydrogen bonding interaction and double bond, which favors molecular planarity and rigidity in the ground state and molecular flexibility in the excited state. Following this proposal, a particular class of NIR-II photothermal polymers are prepared. Their remarkable photothermal conversion efficiency is in good agreement with our strategy of coupling polymeric rigidity and flexibility, which accounts for the improved light absorption on going from the ground state to the excited state and nonradiative emission on going from the excited state to the ground state. It is envisioned that such a concept of coupling polymeric rigidity and flexibility will offer great inspiration for developing NIR-II photothermal polymers with the use of other chromophores.

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

The chemical structure of donors and acceptors limit the power conversion efficiencies achievable with active layers of binary donor-acceptor mixtures. Here, using quaternary blends, double cascading energy level alignment in bulk heterojunction organic photovoltaic active layers are realized, enabling efficient carrier splitting and transport. Numerous avenues to optimize light absorption, carrier transport, and charge-transfer state energy levels are opened by the chemical constitution of the components. Record-breaking PCEs of 18.07% are achieved where, by electronic structure and morphology optimization, simultaneous improvements of the open-circuit voltage, short-circuit current and fill factor occur. The donor and acceptor chemical structures afford control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses.

Panchromatically Responsive Organic Photodiodes utilizing a Noninvasive Narrowband Color Electrode

Organic photodiodes (OPDs) are emerging as potential candidates in image sensors owing to their high sensitivity and submicron photoactive layer thickness. For OPDs to be more competitive, it is necessary to develop an economical fabrication process and improve their narrowband spectral response from visible to near-infrared (NIR). In this study, panchromatic OPDs with a remarkable narrowband response from visible to NIR are developed by integrating a solution-processed optical filter-electrode (OF-electrode) and a panchromatic organic photoactive layer. Solution-processable TiO₂ nanoparticles (sTNPs) bound to an acetylacetone ligand are used to construct the OF-electrode, which had the structure Ag/sTNP/Ag, and a ternary blend of a polymer donor, a nonfullerene acceptor, and a fullerene acceptor is used for preparing the panchromatic organic photoactive layer. Direct integration of the OF-electrode with the organic photoactive layer eliminates the need for additional OF installation, without damaging the underlying organic photoactive layer. Variation of the sTNP layer thickness controls the color filtering wavelength to vary from visible to NIR, with exceptionally narrow full width at half-maximum (fwhm) values of 48-82 nm and transparency values of 50-70%. Owing to their selective response for the desired color and their capability to minimize noise from other colors, the OPDs exhibit high sensitivity values of 2.82 × 10¹², 3.02 × 10¹², and 3.94 × 10¹² cm Hz^0.5/W (Jones) with narrow fwhm values of 110, 91, and 75 nm at a peak transmittance exceeding 65% for blue, green, and red, respectively. Furthermore, they detect NIR light at a wavelength of 950 nm with a narrow fwhm value of 51 nm and a high sensitivity of 3.78 × 10¹² cm Hz^0.5/W (Jones).

Highly Efficient and Photostable Ternary Organic Solar Cells Enabled by the Combination of Non-Fullerene and Fullerene Acceptors with Thienopyrrolodione-based Polymer Donors

Two polymer donors, PFBDT-8ttTPD and PClBDT-8ttTPD, consisting of halogenated thiophene-substituted benzo[1,2-b:4,5-b']dithiophene and alkyl-substituted thieno[3,2-b]thiophene linked thieno[3,4-c]pyrrole-4,6(5H)-dione, were designed and synthesized for the evaluation of photovoltaic performances. The fabricated IT-4F-based organic solar cells (OSCs) exhibited maximum power conversion efficiency (PCE) values of 12.81 and 11.12% for PFBDT-8ttTPD and PClBDT-8ttTPD, respectively. Furthermore, PFBDT-8ttTPD:Y6 showed significantly improved PCE (15.05%) due to the extended light harvesting in the broad solar spectrum, whereas the PClBDT-8ttTPD:Y6 displayed relatively low PCE (10.02%). A ternary system incorporating PC₇₁BM as the third component into bulk-heterojuction composites (PFBDT-8ttPTD:non-fullerene) was investigated with the aim of utilizing the advantages of PC₇₁BM. As a result, PFBDT-8ttTPD:IT-4F:PC₇₁BM exhibited an improved PCE (13.67%) compared to that of the corresponding binary OSC. In particular, ternary OSC of PFBDT-8ttTPD:Y6:PC₇₁BM showed outstanding photovoltaic performance (PCE = 16.43%) as well as photostability, retaining approximately 80% of the initial PCE after 500 h under continuous illumination. The introduction of a small amount of PC₇₁BM resulted in favorable and dense molecular packing with improved crystallinity as well as enhanced charge carrier mobility for efficient OSC.

Comprehensive and Comparative Analysis of Photoinduced Charge Generation, Recombination Kinetics, and Energy Losses in Fullerene and Nonfullerene Acceptor-Based Organic Solar Cells

In this work, a unique comprehensive and comparative analysis of photoinduced charge generation, recombination kinetics, and energy losses has been carried out to study the effect of different fullerene-based acceptors (FBAs) and nonfullerene acceptors (NFAs) on the performance of organic solar cells (OSCs). For this, different FBAs, specifically ICBA, PC60BM, and PC70BM, and NFAs, namely, ITIC, IT-4F, and IEICO-4F, were employed independently along with a particular donor polymer, PBDB-T, to fabricate bulk heterojunction OSCs and their performances have been compared. This donor molecule is known to give similar power conversion efficiency (PCE) with FBAs and NFAs and hence is ideal for comparative studies. The origin of the higher PCE of NFA-based OSCs vs FBA-based OSCs is analyzed in terms of spectral coverage, charge generation, recombination, and energy loss. It is found that the energy loss (ΔE_loss) is ∼0.8 to 1 eV for FBA-based OSCs, while it is 0.5-0.7 eV for NFA-based OSCs. Interestingly, for the PBDB-T:IEICO-4F-based system, energy losses due to charge generation (ΔE_CT) are ∼0 eV and therefore this system has minimum ΔE_loss among all of the studied devices. Providing a systematic, comprehensive, and comparative outlook, our study may further be extended to new upcoming NFA systems and beyond the donor system used in this work.

High-Performance Semitransparent Organic Solar Cells with Excellent Infrared Reflection and See-Through Functions

Clean energy production and saving play vital impacts on the sustainability of the global community. Herein, high-performance semitransparent organic solar cells (ST-OSCs) with excellent features of power generation, being see-through, and infrared reflection of heat dissipation, with promising perspectives for building-integrated photovoltaics (BIPVs) are reported. To simultaneously improve average visible transmittance (AVT) and power conversion efficiency (PCE), formally in a trade-off relationship, of ST-OSCs, new ternary blends with alloy-like near-infrared (NIR) acceptors are employed, which are effective to improve device efficiency while maintaining visible absorption unchanged, resulting in PCEs of 16.8% for opaque devices and 13.1% for semitransparent OSCs (AVT of 22.4% and infrared photon radiation rejection (IRR) of 77%). Further, multifunctional ST-OSCs are realized via introducing simple, yet effective photonic reflectors, together with optical simulation, leading to not only perfect fitting of the visible transmittance peak (555 nm) to the photopic response of the human eye but also an excellent IRR of 90% (780-2500 nm), along with 23% AVT and over 12% PCE. This is thought to be the best-performing multifunctional ST-OSC with promising prospects as BIPVs in terms of power generation, heat dissipation, and being see-through.

Toward Visibly Transparent Organic Photovoltaic Cells Based on a Near-Infrared Harvesting Bulk Heterojunction Blend

Wavelength-selective harvesting by organic solar cells (OSCs) has attracted significant research attention due to the unique potential of these materials for smart photovoltaic window applications. Here, a visibly transparent OSC is demonstrated by utilizing both near-infrared (NIR)-absorbing polymer donor and nonfullerene acceptor (NFA) materials with narrow optical band gaps of less than 1.4 eV. Despite the substantial overlap in absorption spectra between the donor and acceptor, sufficient lowest unoccupied molecular orbital (LUMO) and highest occupied molecule orbital (HOMO) energy offsets for efficient charge separation with concurrent very low voltage losses yield a power conversion efficiency (PCE) of 9.13%. Moreover, with the introduction of an ultrathin Ag film (8 nm) as a transparent top electrode, semitransparent OSCs exhibit an excellent dual-side photovoltaic performance of 5.7 and 3.9% under bottom and top illumination, respectively, with high transmittance reaching 60% at wavelengths from 400 to 600 nm. This approach is expected to provide a new perspective in developing the highly efficient and transparent OSCs.

Asymmetric Electron Acceptors for High-Efficiency and Low-Energy-Loss Organic Photovoltaics

Low energy loss and efficient charge separation under small driving forces are the prerequisites for realizing high power conversion efficiency (PCE) in organic photovoltaics (OPVs). Here, a new molecular design of nonfullerene acceptors (NFAs) is proposed to address above two issues simultaneously by introducing asymmetric terminals. Two NFAs, BTP-S1 and BTP-S2, are constructed by introducing halogenated indandione (A₁ ) and 3-dicyanomethylene-1-indanone (A₂ ) as two different conjugated terminals on the central fused core (D), wherein they share the same backbone as well-known NFA Y6, but at different terminals. Such asymmetric NFAs with A₁ -D-A₂ structure exhibit superior photovoltaic properties when blended with polymer donor PM6. Energy loss analysis reveals that asymmetric molecule BTP-S2 with six chlorine atoms attached at the terminals enables the corresponding devices to give an outstanding electroluminescence quantum efficiency of 2.3 × 10^-2 %, one order of magnitude higher than devices based on symmetric Y6 (4.4 × 10^-3 %), thus significantly lowering the nonradiative loss and energy loss of the corresponding devices. Besides, asymmetric BTP-S1 and BTP-S2 with multiple halogen atoms at the terminals exhibit fast hole transfer to the donor PM6. As a result, OPVs based on the PM6:BTP-S2 blend realize a PCE of 16.37%, higher than that (15.79%) of PM6:Y6-based OPVs. A further optimization of the ternary blend (PM6:Y6:BTP-S2) results in a best PCE of 17.43%, which is among the highest efficiencies for single-junction OPVs. This work provides an effective approach to simultaneously lower the energy loss and promote the charge separation of OPVs by molecular design strategy.

Reduced Nonradiative Recombination Energy Loss Enabled Efficient Polymer Solar Cells via Tuning Alkyl Chain Positions on Pendent Benzene Units of Polymers

Nonradiative recombination energy loss (ΔE₃) plays a key role in enhancing device efficiencies for polymer solar cells (PSCs). Until now, there is no clear resolution for reducing ΔE₃ via molecular design. Herein, we report two conjugated polymers, PBDB-P-p and PBDB-P-m, which are integrated from benzo[1,2-b:4,5-b']dithiophene with alkylthio chain substituted at para- or meta-position on pendent benzene and benzo[1,2-c:4,5-c']dithiophene-4,8-dione. Both the polymers have different temperature-dependent aggregation properties but similar molecular energy levels. When BO-4Cl was used as an acceptor to fabricate PSCs, the device of PBDB-P-p:BO-4Cl displayed a maximal power conversion efficiency (PCE) of 13.83%, while the best device of PBDB-P-m:BO-4Cl exhibited a higher PCE of 14.12%. The close J_SCs and fill factors in both PSCs are attributed to their formation of effective nanoscale phase separation as confirmed by atomic force microscopy measurements. We find that the PBDB-P-m-based device has 1 order of magnitude higher electroluminescence quantum efficiency (EQE_EL) than in the PBDB-P-p-based one, which could arise from the relatively weak aggregation in the PBDB-P-m-based film. Thus, the PBDB-P-m-based device has a remarkably enhanced V_OC of 0.86 V in contrast to 0.80 V in the PBDB-P-p-based device. This study offers a feasible structural optimization way on the alkylthio side chain substitute position on the conjugated polymer to enhance V_OC by reducing nonradiative recombination energy loss in the resulting PSCs.

Two-Dimensional Bi2O2Se with High Mobility for High-Performance Polymer Solar Cells

Carrier mobility is a critical factor for power conversion efficiency (PCE) of polymer solar cells (PSCs), and the low charge carrier mobility still limits the performance improvement of PSCs. Adding high-mobility material into the active layer is one of the better ways to enhance the PCE of PSCs. Two-dimensional (2D) Bi₂O₂Se can be an ideal additive material for improving the carrier mobility of PSCs because of its ultrahigh mobility and high thermal stability. In this work, the Bi₂O₂Se few-layer 2D nanoflakes are fabricated by combining lithium intercalation with shear force-assisted liquid phase exfoliation and applied as an additive to promote charge transport in PSCs for the first time. The 2D Bi₂O₂Se nanoflakes, when introduced into the active layer, not only provide a new interface between a donor and an acceptor and efficient charge transfer pathways but also induce crystallization of the photosensitive layer and form continuous interpenetrating networks, which promotes the exciton separation and charge transfer in the photosensitive layer. As a result, the PCE of a device based on PBDB-T/ITIC is increased from 10.09% (0 wt %) to 12.22% (2 wt %). Meanwhile, the PCE of a device based on PM6/Y6 is also increased from 14.59% for a binary device to 16.28% for an optimized ternary device (2 wt %). Moreover, the optimized ternary device shows excellent air stability by suppressing the mixing of the two phases. This work provides a good method to enhance the PCE of PSCs and also shows that the Bi₂O₂Se material has a good prospect in photovoltaic devices.

Nonfused Nonfullerene Acceptors with an A-D-A'-D-A Framework and a Benzothiadiazole Core for High-Performance Organic Solar Cells

Nonfullerene acceptors (NFAs) have contributed significantly to the progress of organic solar cells (OSCs). However, most NFAs feature a large fused-ring backbone, which usually requires a tedious multiple-step synthesis, and are not applicable to commercial applications. An alternative strategy is to develop nonfused NFAs, which possess synthetic simplicity and facile tunability in optoelectronic properties and solid-state microstructures. In this work, we report two nonfused NFAs, BTCIC and BTCIC-4Cl, based on an A-D-A'-D-A architecture, which possess the same electron-deficient benzothiadiazole central core but different electron-withdrawing terminal groups. The optical properties, energy levels, and molecular crystallinities were finely tuned by changing the terminal groups. Moreover, a decent power conversion efficiency of 9.3 and 10.5% has been achieved by BTCIC and BTCIC-4Cl, respectively, by blending them with an appropriate polymer donor. These results demonstrate the potential of A-D-A'-D-A type nonfused NFAs for high-performance OSCs. Further development of nonfused NFAs will be very fruitful by employing appropriate building blocks and via side-chain optimizations.

Near-Infrared Electron Acceptors with Unfused Architecture for Efficient Organic Solar Cells

The absorption of nonfullerene acceptors (NFAs) at near-infrared (NIR) regions is crucial for obtaining high current densities in organic solar cells (OSCs). Herein, two narrow-band gap NFAs with unfused backbones possessing broad (600-900 nm) and strong absorption are developed by the conjugation of a benzothiadiazole core to halogenated end groups through a cyclopentadithiophene bridge. Compared with the fluorinated counterpart BCDT-4F, the chlorinated NFA BCDT-4Cl shows stronger J-aggregation and closer molecular packing, leading to an optimized blend morphology when paired with the polymer donor, PBDB-T. Thus, an obvious improvement in external quantum efficiency response was obtained for BCDT-4Cl-based OSCs, presenting a higher efficiency of 12.10% than those (9.65%) based on BCDT-4F. This work provides a design strategy for NIR acceptors in the combination of electron-deficient core and halogenated terminal in unfused backbones, which results in not only fine-tuning the optoelectronic properties but also simplifying the synthetic complexities of molecules.

Design Principles and Synergistic Effects of Chlorination on a Conjugated Backbone for Efficient Organic Photovoltaics: A Critical Review

The pursuit of low-cost, flexible, and lightweight renewable power resources has led to outstanding advancements in organic solar cells (OSCs). Among the successful design principles developed for synthesizing efficient conjugated electron donor (ED) or acceptor (EA) units for OSCs, chlorination has recently emerged as a reliable approach, despite being neglected over the years. In fact, several recent studies have indicated that chlorination is more potent for large-scale production than the highly studied fluorination in several aspects, such as easy and low-cost synthesis of materials, lowering energy levels, easy tuning of molecular orientation, and morphology, thus realizing impressive power conversion efficiencies in OSCs up to 17%. Herein, an up-to-date summary of the current progress in photovoltaic results realized by incorporating a chlorinated ED or EA into OSCs is presented to recognize the benefits and drawbacks of this interesting substituent in photoactive materials. Furthermore, other aspects of chlorinated materials for application in all-small-molecule, semitransparent, tandem, ternary, single-component, and indoor OSCs are also presented. Consequently, a concise outlook is provided for future design and development of chlorinated ED or EA units, which will facilitate utilization of this approach to achieve the goal of low-cost and large-area OSCs.

Processing-Friendly Slot-Die-Cast Nonfullerene Organic Solar Cells with Optimized Morphology

The power conversion efficiencies (PCEs) of spin-coated organic solar cells (OSCs) have increased rapidly in recent years. However, spin-coating shows poor reproducibility for large-scale production. Slot-die coating, a lab-scale version of roll-to-roll fabrication, has been considered as the most suitable technique for the production of future large-area commercial devices. For this, the highly efficient slot-die-fabricated devices are required to approach the performance of spin-cast OSCs. We present here, a nonfullerene OSC device utilizing the PBDB-T/i-IEICO-4F blend, fabricated by slot-die coating without post-treatment in the ambient conditions. The device showed an impressive PCE of 12.5%, which is one of the highest reported performance for slot-die-coated OSC devices. Compared to the spin-coated and blade-coated films with optimized thermal annealing time, the films fabricated by slot-die coating (without any treatment) exhibit not only the highest degree of crystallinity and face-on orientation but also the smallest domain size and the purest phase toward enhanced and balanced carrier mobilities. An enhanced excited-state charge generation has been attributed to transient charge kinetics using ultrafast spectroscopic signatures. The optimized slot-die-coated devices exhibit excellent tolerance for the increased thickness of the photoactive layer, attributing to favorable molecular packing. We used slot-die coating as a simple fabrication technique, which is capable of yielding highly efficient OSCs.

13%-Efficiency Quaternary Polymer Solar Cell with Nonfullerene and Fullerene as Mixed Electron Acceptor Materials

In this article, we report 13%-efficiency quaternary polymer solar cell. By introducing bis-PC₇₁BM:PC₇₁BM into a known nonfullerene system-poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl))benzo[1,2- b:4,5- b']dithiophene)- co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2- c:4,5- c']dithiophene-4,8-dione):3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone-methyl))-5,5,11,11-tetrakis(4- n-hexylphenyl)-dithieno[2,3 d:2',3' d']- s-indaceno[1,2 b:5,6 b']dithiophene (PBDB-T:IT-M), the quaternary solar cell significantly outperforms the nonfullerene binary and the ternary (PBDB-T:IT-M:fullerene) devices with a significant increase in the short-circuit current-density (18.2 vs 16.5 and 16.8-17.5 mA/cm²) and the fill factor (0.73 vs 0.67 and 0.707-0.726), and hence, large power conversion efficiency (13% for quaternary vs 11% for the binary and 12% for the ternary). Grazing incidence wide-angle X-ray scattering data indicate that both the polymer and IT-M phase crystallinity becomes greater upon introduction of PC₇₁BM as the forth additive into the host ternary PBDB-T:IT-M:bis-PC₇₁BM, which results in an increase in both the electron and hole mobilities, contributing to the J_sc enhancement. Our results indicate that the use of the forth fullerene component provides more choices and more mechanisms than the ternary systems for tuning the photon-to-electron conversion; therefore, sheds light on the realization of high-efficiency polymer solar cells by designing the multiacceptor components with aligned energy levels, complementary absorption spectra, and improved film morphologies.

Enhanced Charge Transfer between Fullerene and Non-Fullerene Acceptors Enables Highly Efficient Ternary Organic Solar Cells

Insufficient driving forces defined as the energetic offsets of the frontier molecular orbitals between a donor and an acceptor influence the charge separation in organic solar cells (OSCs), thus restricting the improvement of quantum efficiencies. Herein, we demonstrate that enhancing charge transfer between fullerene and non-fullerene acceptors via ternary strategy is an effective method to address this problem. By introducing an electron acceptor [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) as the third component to the binary blends based on the polymer donor of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)-4-fluorothiophen-2-yl)-benzo[1,2- b:4,5- b']dithiophene))- alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'- c:4',5'- c']dithiophene-4,8-dione)] (PBDB-TF) and the small-molecule acceptor of 2,2'-((2 Z,2' Z)-(((2,5-difluoro-1,4-phenylene)bis(4,4-bis(2-ethylhexyl)-4 H-cyclopenta[2,1- b:3,4- b']dithiophene-6,2-diyl))bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1 H-indene-2,1-diylidene))dimalononitrile (HF-PCIC) or 2,2'-((2 Z,2' Z)-(((2,5-difluoro-1,4-phenylene)bis(4,4-bis(2-ethylhexyl)-4 H-cyclopenta[2,1- b:3,4- b']dithiophene-6,2-diyl))bis(methanylylidene))bis(5,6-dichloro-3-oxo-2,3-dihydro-1 H-indene-2,1-diylidene))dimalononitrile (HC-PCIC) with unfused cores, the quantum efficiencies can be boosted from ∼70% for binary blends to over 80% for ternary blends in the longer wavelength ranges. PC₇₁BM shows lower energy levels and higher electron mobility, benefiting the charge transfer and transport in ternary OSCs and resulting in an enhanced quantum efficiency. As a result, ternary OSCs based on PBDB-TF/HF-PCIC/PC₇₁BM and PBDB-TF/HC-PCIC/PC₇₁BM exhibit high power conversion efficiencies (PCEs) of 11.55 and 12.36%, respectively. In addition, excellent thermal stabilities are realized for both ternary OSCs, which retained ∼80% initial PCEs after thermal treatment at 130 °C for 12 h, indicating that the active layer morphology containing fullerene/non-fullerene acceptors is stabilized. This work demonstrates efficient and thermally stable ternary OSCs with enhanced charge transfer between fullerene and non-fullerene acceptors via the modulation of energy levels, which helps to better understand the working mechanism of ternary OSCs.