1
|
Vardhini G, Dilip PS, Kumar SA, Suriyakumar S, Hariharan M, Shaijumon MM. Polyimide-Based Aqueous Potassium Energy Storage Systems Using Concentrated WiSE Electrolyte. ACS APPLIED MATERIALS & INTERFACES 2024. [PMID: 38165729 DOI: 10.1021/acsami.3c13027] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/04/2024]
Abstract
Aqueous batteries are considered as promising alternative power sources due to their eco-friendly, cost-effective, and nonflammable attributes. Employing organic-based electrode materials offers further advantages toward building greener and sustainable systems, owing to their tunability and environmental friendliness. In order to enhance the energy and power densities, superconcentrated aqueous electrolytes, such as water-in-salt electrolytes (WiSE), have renewed the interest in aqueous batteries due to their enhanced stability and much wider electrochemical stability window (>1.23 V) compared with the traditional aqueous electrolytes. Here, we present a perylene diimide-based electrode material (PDI-Urea) as an appealing anode for aqueous potassium energy storage systems and investigate their electrochemical performance in three WiSE electrolytes, namely, 30 M potassium acetate, 40 M potassium formate and 30 M potassium bis(fluorosulfonyl)imide (KFSI). To explore the potential of PDI-Urea for potassium-based electrochemical energy systems, we fabricated full cell devices such as aqueous potassium dual-ion battery (APDIB) and aqueous K-ion battery (AKIB) and studied their electrochemical properties with 30 M KFSI electrolyte. The full cell K-ion battery, using a PBA cathode, exhibited excellent electrochemical performance with good rate capability and impressive capacity retention of 91% upon 1000 cycles. Further, the reaction mechanism of the electrodes is systematically analyzed using ex-situ studies.
Collapse
Affiliation(s)
- Gudla Vardhini
- School of Physics, Indian Institute of Science Education and Research Thiruvananthapuram (IISER-TVM), Maruthamala PO, Vithura, Kerala 695551, India
| | - Patoju Sai Dilip
- School of Chemistry, Indian Institute of Science Education and Research Thiruvananthapuram (IISER-TVM), Maruthamala PO, Vithura, Kerala 695551, India
| | - Sreelakshmi Anil Kumar
- School of Physics, Indian Institute of Science Education and Research Thiruvananthapuram (IISER-TVM), Maruthamala PO, Vithura, Kerala 695551, India
| | - Shruti Suriyakumar
- School of Physics, Indian Institute of Science Education and Research Thiruvananthapuram (IISER-TVM), Maruthamala PO, Vithura, Kerala 695551, India
| | - Mahesh Hariharan
- School of Chemistry, Indian Institute of Science Education and Research Thiruvananthapuram (IISER-TVM), Maruthamala PO, Vithura, Kerala 695551, India
| | - Manikoth M Shaijumon
- School of Physics, Indian Institute of Science Education and Research Thiruvananthapuram (IISER-TVM), Maruthamala PO, Vithura, Kerala 695551, India
| |
Collapse
|
2
|
Yang M, Hu W, Li J, Chen T, Zhao S, Chen X, Wang S, Jin H. Long Cycle Life for Rechargeable Lithium Battery using Organic Small Molecule Dihydrodibenzo[c,h][2,6]naphthyridine-5,11-dione as a Cathode after Isoindigo Pigment Isomerization. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2307134. [PMID: 38032135 PMCID: PMC10811468 DOI: 10.1002/advs.202307134] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/27/2023] [Revised: 10/16/2023] [Indexed: 12/01/2023]
Abstract
Sustainability and adaptability in structural design of the organic cathodes present promises for applications in alkali metal ion batteries. Nevertheless, a formidable challenge lies in their high solubility in organic electrolytes, particularly for small molecular materials, impeding cycling stability and high capacity. This study focuses on the design and synthesis of organic small molecules, the isomers of (E)-5,5'-difluoro-[3,3'-biindolinylidene]-2,2'-dione (EFID) and 3,9-difluoro-6,12-dihydrodibenzo [c, h][2,6]naphthyridine-5,11-dione (FBND). While EFID, characterized by a less π-conjugated structure, exhibits subpar cycling stability in lithium-ion batteries (LIBs), intriguingly, another isomer, FBND, demonstrates exceptional capacity and cycling stability in LIBs. FBND delivers a remarkable capacity of 175 mAh g-1 at a current density of 0.05 A g-1 and maintains excellent cycling stability over 2000 cycles, retaining 90% of its initial capacity. Furthermore, an in-depth examination of redox reactions and storage mechanisms of FBND are conducted. The potential of FBND is also explored as an anode in lithium-ion batteries (LIBs) and as a cathode in sodium-ion batteries (SIBs). The FBND framework, featuring extended π-conjugated molecules with an imide structure compared to EFID, proves to be an excellent material template to develop advanced organic small molecular cathode materials for sustainable batteries.
Collapse
Affiliation(s)
- Mingcong Yang
- Key Lab of Advanced Energy Storage and ConversionZhejiang Province Key Lab of Leather EngineeringCollege of Chemistry and Materials EngineeringWenzhou University WenzhouZhejiang325035China
- Zhejiang Engineering Research Center for Electrochemical Energy Materials and DevicesInstitute of New Materials and Industrial TechnologiesWenzhou University WenzhouZhejiang325035China
- Department of Materials Science and EngineeringSchool of Chemistry and Materials ScienceUniversity of Science and Technology of ChinaHefeiAnhui Province230026China
| | - Wei Hu
- Key Lab of Advanced Energy Storage and ConversionZhejiang Province Key Lab of Leather EngineeringCollege of Chemistry and Materials EngineeringWenzhou University WenzhouZhejiang325035China
| | - Jun Li
- Key Lab of Advanced Energy Storage and ConversionZhejiang Province Key Lab of Leather EngineeringCollege of Chemistry and Materials EngineeringWenzhou University WenzhouZhejiang325035China
| | - Tao Chen
- Department of Materials Science and EngineeringSchool of Chemistry and Materials ScienceUniversity of Science and Technology of ChinaHefeiAnhui Province230026China
| | - Shiqiang Zhao
- Key Lab of Advanced Energy Storage and ConversionZhejiang Province Key Lab of Leather EngineeringCollege of Chemistry and Materials EngineeringWenzhou University WenzhouZhejiang325035China
| | - Xi'an Chen
- Key Lab of Advanced Energy Storage and ConversionZhejiang Province Key Lab of Leather EngineeringCollege of Chemistry and Materials EngineeringWenzhou University WenzhouZhejiang325035China
| | - Shun Wang
- Key Lab of Advanced Energy Storage and ConversionZhejiang Province Key Lab of Leather EngineeringCollege of Chemistry and Materials EngineeringWenzhou University WenzhouZhejiang325035China
| | - Huile Jin
- Key Lab of Advanced Energy Storage and ConversionZhejiang Province Key Lab of Leather EngineeringCollege of Chemistry and Materials EngineeringWenzhou University WenzhouZhejiang325035China
- Zhejiang Engineering Research Center for Electrochemical Energy Materials and DevicesInstitute of New Materials and Industrial TechnologiesWenzhou University WenzhouZhejiang325035China
| |
Collapse
|
3
|
Chen Q, Kang H, Gao Y, Zhang L, Wang R, Zhang S, Zhou T, Li H, Mao J, Zhang C, Guo Z. Nanostructured Porous Polymer with Low Volume Expansion, Structural Distortion, and Gradual Activation for High and Durable Lithium Storage. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37874797 DOI: 10.1021/acsami.3c11111] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/26/2023]
Abstract
Organic compounds exhibit great potential as sustainable, tailorable, and environmentally friendly electrode materials for rechargeable batteries. However, the intrinsic defects of organic electrodes, including solubility, low ionic conductivity, and restricted electroactivity sites, will inevitably decrease the cycling life and capacity. We herein designed and prepared nanostructured porous polymers (NPP) with a simple one-pot method to overcome the above defects. Theoretical calculations and experimental results demonstrate that the as-synthesized NPP exhibited low volume expansion, molecular-structural distortion, and a gradual function activation process during cycling, thus exhibiting superior, high, and durable lithium storage. The gradual molecular distortion during the lithium storage processes provides more redox-active sites for Li storage, increasing the Li-storage capacity. Ex situ spectrum studies reveal the redox reaction mechanism of Li storage and demonstrate a gradual activation process during the repeated charging/discharging until the full storage of 18 Li ions is achieved. Additionally, a real-time observation on the NPP anode by in situ transmission electron microscope reveals a slight volume expansion during the repeating lithiation and delithiation processes, ensuring its structural integrity during cycling. This quantitative work for high-durability lithium storage could be of immediate benefit for designing organic electrode materials.
Collapse
Affiliation(s)
- Qi Chen
- Institutes of Physical Science and Information Technology, School of Materials Science and Engineering, Leibniz International Joint Research Center of Materials Sciences of Anhui Province, Anhui Province Key Laboratory of Environment-Friendly Polymer Materials, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University, Hefei 230601, China
| | - Hongwei Kang
- School of Chemistry and Materials Engineering, Anhui Provincial Key Laboratory for Degradation and Monitoring of Pollution of the Environment, Fuyang Normal University, Fuyang 236037, China
| | - Yuchen Gao
- Institutes of Physical Science and Information Technology, School of Materials Science and Engineering, Leibniz International Joint Research Center of Materials Sciences of Anhui Province, Anhui Province Key Laboratory of Environment-Friendly Polymer Materials, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University, Hefei 230601, China
| | - Longhai Zhang
- Institutes of Physical Science and Information Technology, School of Materials Science and Engineering, Leibniz International Joint Research Center of Materials Sciences of Anhui Province, Anhui Province Key Laboratory of Environment-Friendly Polymer Materials, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University, Hefei 230601, China
| | - Rui Wang
- Institutes of Physical Science and Information Technology, School of Materials Science and Engineering, Leibniz International Joint Research Center of Materials Sciences of Anhui Province, Anhui Province Key Laboratory of Environment-Friendly Polymer Materials, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University, Hefei 230601, China
| | - Shilin Zhang
- School of Chemical Engineering & Advanced Materials, The University of Adelaide, Adelaide 5005, Australia
| | - Tengfei Zhou
- Institutes of Physical Science and Information Technology, School of Materials Science and Engineering, Leibniz International Joint Research Center of Materials Sciences of Anhui Province, Anhui Province Key Laboratory of Environment-Friendly Polymer Materials, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University, Hefei 230601, China
| | - Hongbao Li
- Institutes of Physical Science and Information Technology, School of Materials Science and Engineering, Leibniz International Joint Research Center of Materials Sciences of Anhui Province, Anhui Province Key Laboratory of Environment-Friendly Polymer Materials, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University, Hefei 230601, China
| | - Jianfeng Mao
- School of Chemical Engineering & Advanced Materials, The University of Adelaide, Adelaide 5005, Australia
| | - Chaofeng Zhang
- Institutes of Physical Science and Information Technology, School of Materials Science and Engineering, Leibniz International Joint Research Center of Materials Sciences of Anhui Province, Anhui Province Key Laboratory of Environment-Friendly Polymer Materials, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University, Hefei 230601, China
| | - Zaiping Guo
- School of Chemical Engineering & Advanced Materials, The University of Adelaide, Adelaide 5005, Australia
| |
Collapse
|
4
|
Das A, Mohit, Thomas KRJ. Donor-Acceptor Covalent Organic Frameworks as a Heterogeneous Photoredox Catalyst for Scissoring Alkenes to Carbonyl Constituents. J Org Chem 2023; 88:14065-14077. [PMID: 37695568 DOI: 10.1021/acs.joc.3c01594] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/12/2023]
Abstract
The conversion of alkenes to carbonyl constituents via the cleavage of the C═C bond is unique due to its biological and pharmacological significance. Though a number of oxidative C═C cleavage protocols have been demonstrated for terminal and electron-rich alkene systems, none of them were optimized for electron-deficient and conjugated alkenes. In this work, a covalent organic framework containing triphenylamine and triazine units was revealed to cleave the C═C bond of alkenes under very mild conditions involving visible light irradiation due to its photoredox property. The alkenes can be conveniently broken across the double bond to their constituent carbonyl derivatives on light irradiation in the presence of air and the covalent organic framework photocatalyst. This protocol is applicable for a wide range of alkenes in an aqueous acetonitrile medium with high functional group tolerance and regioselectivity. Though the electron-deficient alkenes required tetramethylethylene diamine as a sacrificial donor, the electron-rich alkenes do not demand any additives.
Collapse
Affiliation(s)
- Anupam Das
- Organic Materials Laboratory, Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247667, India
| | - Mohit
- Organic Materials Laboratory, Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247667, India
| | - K R Justin Thomas
- Organic Materials Laboratory, Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247667, India
| |
Collapse
|
5
|
Sun QQ, Sun T, Du JY, Xie ZL, Yang DY, Huang G, Xie HM, Zhang XB. In Situ Electrochemical Activation of Hydroxyl Polymer Cathode for High-Performance Aqueous Zinc-Organic Batteries. Angew Chem Int Ed Engl 2023; 62:e202307365. [PMID: 37423888 DOI: 10.1002/anie.202307365] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2023] [Revised: 07/04/2023] [Accepted: 07/05/2023] [Indexed: 07/11/2023]
Abstract
The slow reaction kinetics and structural instability of organic electrode materials limit the further performance improvement of aqueous zinc-organic batteries. Herein, we have synthesized a Z-folded hydroxyl polymer polytetrafluorohydroquinone (PTFHQ) with inert hydroxyl groups that could be partially oxidized to the active carbonyl groups through the in situ activation process and then undertake the storage/release of Zn2+ . In the activated PTFHQ, the hydroxyl groups and S atoms enlarge the electronegativity region near the electrochemically active carbonyl groups, enhancing their electrochemical activity. Simultaneously, the residual hydroxyl groups could act as hydrophilic groups to enhance the electrolyte wettability while ensuring the stability of the polymer chain in the electrolyte. Also, the Z-folded structure of PTFHQ plays an important role in reversible binding with Zn2+ and fast ion diffusion. All these benefits make the activated PTFHQ exhibit a high specific capacity of 215 mAh g-1 at 0.1 A g-1 , over 3400 stable cycles with a capacity retention of 92 %, and an outstanding rate capability of 196 mAh g-1 at 20 A g-1 .
Collapse
Affiliation(s)
- Qi-Qi Sun
- State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, 130022, China
- National & Local United Engineering Laboratory for Power Battery, Department of Chemistry, Northeast Normal University, Changchun, Jilin, 130024, China
| | - Tao Sun
- Institute of Quantum and Sustainable Technology, School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, 212013, China
| | - Jia-Yi Du
- State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, 130022, China
- School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei, 230026, China
| | - Zi-Long Xie
- State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, 130022, China
- School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei, 230026, China
| | - Dong-Yue Yang
- State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, 130022, China
- School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei, 230026, China
| | - Gang Huang
- State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, 130022, China
- School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei, 230026, China
| | - Hai-Ming Xie
- National & Local United Engineering Laboratory for Power Battery, Department of Chemistry, Northeast Normal University, Changchun, Jilin, 130024, China
| | - Xin-Bo Zhang
- State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, 130022, China
- School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei, 230026, China
| |
Collapse
|
6
|
Huang J, Yu P, Liao M, Dong X, Xu J, Ming J, Bin D, Wang Y, Zhang F, Xia Y. A self-charging salt water battery for antitumor therapy. SCIENCE ADVANCES 2023; 9:eadf3992. [PMID: 37000876 PMCID: PMC10065443 DOI: 10.1126/sciadv.adf3992] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/20/2022] [Accepted: 02/27/2023] [Indexed: 06/19/2023]
Abstract
Implantable devices on the tumor tissue as a local treatment are able to work in situ, which minimizes systemic toxicities and adverse effects. Here, we demonstrated an implantable self-charging battery that can regulate tumor microenvironment persistently by the well-designed electrode redox reaction. The battery consists of biocompatible polyimide electrode and zinc electrode, which can consume oxygen sustainably during battery discharge/self-charge cycle, thus modulating hypoxia level in tumor microenvironment. The oxygen reduction in battery leads to the formation of reactive oxygen species, showing 100% prevention on tumor formation. Sustainable consumption of oxygen causes adequate intratumoral hypoxic conditions over the course of 14 days, which is helpful for the hypoxia-activated prodrugs (HAPs) to kill tumor cells. The synergistic effect of the battery/HAPs can deliver more than 90% antitumor rate. Using redox reactions in electrochemical battery provides a potential approach for the tumor inhibition and regulation of tumor microenvironment.
Collapse
Affiliation(s)
- Jianhang Huang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, College of Chemistry and Materials Science, Zhejiang Normal University, Jinhua 321004, China
| | - Peng Yu
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
| | - Mochou Liao
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
| | - Xiaoli Dong
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
| | - Jie Xu
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
| | - Jiang Ming
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
| | - Duan Bin
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
| | - Yonggang Wang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
| | - Fan Zhang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
| | - Yongyao Xia
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, College of Chemistry and Materials Science, Zhejiang Normal University, Jinhua 321004, China
| |
Collapse
|
7
|
Shao P, Liao Y, Feng X, Yan C, Ye L, Yang J. Electronic modulation and structural engineering of tetracyanoquinodimethane with enhanced reaction kinetics for aqueous NH 4+ storage. J Colloid Interface Sci 2023; 633:199-206. [PMID: 36446212 DOI: 10.1016/j.jcis.2022.11.057] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/28/2022] [Revised: 11/07/2022] [Accepted: 11/11/2022] [Indexed: 11/18/2022]
Abstract
Lithium-ion batteries (LIBs) have received much attention because of their environmental, financial, and safety concerns. The advantages of aqueous electrochemical energy storage include environmental friendliness and safety, and the development of prepared electrode materials is predicted to alleviate these issues. A redox-active organic compound, 7,7,8,8‑tetracyanoquinodimethane (TCNQ), is a suitable electrode for aqueous batteries. In this work, the porous and electronic interconnected structure of TCNQ is designed by electronic modulation and structure engineering. With the reduced graphene oxide (rGO) in situ homogeneous loading TCNQ by a one-step facile approach, the exquisite architecture has enhanced conductivity and connected conductive networks, favoring the storage and transportation of NH4+ or electrons in aqueous electrolytes. As a cathode, the obtained TCNQ-rGO exhibits superior performance for NH4+ batteries with an improved reversible capacity of 92.7 mAh/g at 1 A/g of quadruple capacity boosting to pure TCNQ and stable cycle life (5000 cycles at 10 A/g). The adjustment of the loading ratio of TCNQ and rGO for the cycling performance has been studied in detail. Furthermore, the superior ammonium storage mechanism of the TCNQ-rGO hybrid is thoroughly discussed by in situ Raman or ex situ measurements, which also determine the redox activity center groups of the TCNQ-rGO hybrid. Energy level calculations are conducted to help illustrate its potential as an electrode material. Our work demonstrates that electronic modulation and structural engineering of TCNQ can improve the electrochemical performance of molecular organic compound-based electrodes for aqueous rechargeable batteries in a simple and effective way.
Collapse
Affiliation(s)
- Panrun Shao
- School of Material Science & Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, PR China
| | - Yunhong Liao
- School of Material Science & Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, PR China
| | - Xu Feng
- School of Artificial Intelligence and Big Data, Chongqing College of Electronic Engineering, Chongqing 401331, PR China
| | - Chao Yan
- School of Material Science & Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, PR China.
| | - Lingqian Ye
- School of Material Science & Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, PR China
| | - Jun Yang
- School of Material Science & Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, PR China.
| |
Collapse
|
8
|
Li L, Jia S, Cao M, Ji Y, Qiu H, Zhang D. Research progress of “rocking chair” type zinc-ion batteries with zinc metal-free anodes. CHINESE CHEM LETT 2023. [DOI: 10.1016/j.cclet.2023.108307] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/12/2023]
|
9
|
Chen Y, Fan K, Gao Y, Wang C. Challenges and Perspectives of Organic Multivalent Metal-Ion Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2200662. [PMID: 35364614 DOI: 10.1002/adma.202200662] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/21/2022] [Revised: 03/27/2022] [Indexed: 06/14/2023]
Abstract
Rechargeable organic multivalent metal-ion batteries (MMIBs) have attracted a surge of interest as promising alternatives for large-scale energy storage applications because they can combine the advantages of both organic electrodes and multivalent metal-ion batteries. However, the development of organic MMIBs is hampered by many factors, which mean they lag far behind organic alkali-metal- (e.g., Li-, Na-, and K-) ion batteries. Herein, the challenges that are specifically faced by organic MMIBs are analyzed and the strategies that can probably solve such challenges are then discussed. As a special challenge that organic MMIBs are facing, the charge-storage mechanism is particularly underlined to deeply understand the structure-property relationships for guiding the future design of high-performance organic electrodes for MMIBs. The perspectives are thereby elaborated in this review with the outlook of practical applications of organic MMIBs.
Collapse
Affiliation(s)
- Yuan Chen
- School of Optical and Electronic Information, Wuhan National Laboratory for Optoelectronics (WNLO), Optics Valley Laboratory, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Kun Fan
- School of Optical and Electronic Information, Wuhan National Laboratory for Optoelectronics (WNLO), Optics Valley Laboratory, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Yanbo Gao
- School of Optical and Electronic Information, Wuhan National Laboratory for Optoelectronics (WNLO), Optics Valley Laboratory, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Chengliang Wang
- School of Optical and Electronic Information, Wuhan National Laboratory for Optoelectronics (WNLO), Optics Valley Laboratory, Huazhong University of Science and Technology, Wuhan, 430074, China
- Wenzhou Advanced Manufacturing Technology Research Institute, Huazhong University of Science and Technology, Wenzhou, 325035, China
| |
Collapse
|
10
|
Molecular and Morphological Engineering of Organic Electrode Materials for Electrochemical Energy Storage. ELECTROCHEM ENERGY R 2022. [DOI: 10.1007/s41918-022-00152-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
AbstractOrganic electrode materials (OEMs) can deliver remarkable battery performance for metal-ion batteries (MIBs) due to their unique molecular versatility, high flexibility, versatile structures, sustainable organic resources, and low environmental costs. Therefore, OEMs are promising, green alternatives to the traditional inorganic electrode materials used in state-of-the-art lithium-ion batteries. Before OEMs can be widely applied, some inherent issues, such as their low intrinsic electronic conductivity, significant solubility in electrolytes, and large volume change, must be addressed. In this review, the potential roles, energy storage mechanisms, existing challenges, and possible solutions to address these challenges by using molecular and morphological engineering are thoroughly summarized and discussed. Molecular engineering, such as grafting electron-withdrawing or electron-donating functional groups, increasing various redox-active sites, extending conductive networks, and increasing the degree of polymerization, can enhance the electrochemical performance, including its specific capacity (such as the voltage output and the charge transfer number), rate capability, and cycling stability. Morphological engineering facilitates the preparation of different dimensional OEMs (including 0D, 1D, 2D, and 3D OEMs) via bottom-up and top-down methods to enhance their electron/ion diffusion kinetics and stabilize their electrode structure. In summary, molecular and morphological engineering can offer practical paths for developing advanced OEMs that can be applied in next-generation rechargeable MIBs.
Graphical abstract
Collapse
|
11
|
Xu Z, Li M, Sun W, Tang T, Lu J, Wang X. An Ultrafast, Durable, and High-Loading Polymer Anode for Aqueous Zinc-Ion Batteries and Supercapacitors. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2200077. [PMID: 35355338 DOI: 10.1002/adma.202200077] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/04/2022] [Revised: 03/01/2022] [Indexed: 06/14/2023]
Abstract
Zn metal has shown promise as an anode material for grid-level energy storage, yet is challenged by dendritic growth and low Coulombic efficiency. Herein, an ultrafast, stable, and high-loading polymer anode for aqueous Zn-ion batteries and capacitors (ZIBs and ZICs) is developed by engineering both the electrode and electrolyte. The anode polymer is rationally prepared to have a suitable electronic structure and a large π-conjugated structure, whereas the electrolyte is manufactured based on the superiority of triflate anions over sulfate anions, as analyzed and confirmed via experiments and simulations. This dual engineering results in an optimal polymer anode with a low discharge potential, near-theoretical capacity, ultrahigh-loading capability (≈50 mg cm-2 ), ultrafast rate (100 A g-1 ), and ultralong lifespan (one million cycles). Its mechanism involves reversible Zn2+ /proton co-storage at the carbonyl site. When the polymer anode is coupled with cathodes for both ZIB and ZIC applications, the devices demonstrate ultrahigh power densities and ultralong lifespans, far surpassing those of corresponding Zn-metal-based devices.
Collapse
Affiliation(s)
- Zhixiao Xu
- Department of Chemical and Materials Engineering, University of Alberta, 9211-116 Street NW., Edmonton, Alberta, T6G 1H9, Canada
| | - Matthew Li
- Chemical Sciences and Engineering Division, Argonne National Laboratory, 9700 Cass Ave, Lemont, IL, 60439, USA
| | - Wenyuan Sun
- Department of Mechanical Engineering, University of Alberta, 9211-116 Street NW., Edmonton, Alberta, T6G 1H9, Canada
| | - Tian Tang
- Department of Mechanical Engineering, University of Alberta, 9211-116 Street NW., Edmonton, Alberta, T6G 1H9, Canada
| | - Jun Lu
- Chemical Sciences and Engineering Division, Argonne National Laboratory, 9700 Cass Ave, Lemont, IL, 60439, USA
| | - Xiaolei Wang
- Department of Chemical and Materials Engineering, University of Alberta, 9211-116 Street NW., Edmonton, Alberta, T6G 1H9, Canada
| |
Collapse
|
12
|
Lu Y, Cai Y, Zhang Q, Chen J. Insights into Redox Processes and Correlated Performance of Organic Carbonyl Electrode Materials in Rechargeable Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2104150. [PMID: 34617334 DOI: 10.1002/adma.202104150] [Citation(s) in RCA: 41] [Impact Index Per Article: 20.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/31/2021] [Revised: 07/21/2021] [Indexed: 06/13/2023]
Abstract
Organic carbonyl electrode materials have shown great prospects for rechargeable batteries in view of their high capacity, flexible designability, and sustainable production. However, organic carbonyl electrode materials still suffer from unsatisfactory electrochemical performance, which is highly relevant to their redox processes. Herein, an in-depth understanding on redox processes and the correlated electrochemical performance of organic carbonyl electrode materials is provided. The redox processes discussed mainly involve molecular structure evolution (intermediates), crystal structure evolution (phase transition), and charge storage mechanisms. The properties of intermediates can affect voltage, cycling stability, reversible capacity, and rate performance of batteries. Moreover, the reversible capacity/cycling stability and rate performance would be also influenced by phase transition and charge storage mechanisms (diffusion- or surface-controlled), respectively. To accelerate the practical applications of organic carbonyl electrode materials, future work should focus on developing more in situ or operando characterization techniques and further understanding the intrinsic relationships between redox processes and performance. It is hoped that the work discussed herein will stimulate more attention to the detailed redox processes and their correlations with the performance of organic carbonyl electrode materials in rechargeable batteries.
Collapse
Affiliation(s)
- Yong Lu
- Frontiers Science Center for New Organic Matter, Renewable Energy Conversion and Storage Center (RECAST), Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), College of Chemistry, Nankai University, Tianjin, 300071, China
| | - Yichao Cai
- Frontiers Science Center for New Organic Matter, Renewable Energy Conversion and Storage Center (RECAST), Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), College of Chemistry, Nankai University, Tianjin, 300071, China
| | - Qiu Zhang
- Frontiers Science Center for New Organic Matter, Renewable Energy Conversion and Storage Center (RECAST), Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), College of Chemistry, Nankai University, Tianjin, 300071, China
| | - Jun Chen
- Frontiers Science Center for New Organic Matter, Renewable Energy Conversion and Storage Center (RECAST), Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), College of Chemistry, Nankai University, Tianjin, 300071, China
| |
Collapse
|
13
|
Bo Y, Wu W, Guo R, Cao M, Liang Y, Wang M, Yu W, Zhang L, Zhang J. Bipyridine carboxylic acid as a high-performance anode material for lithium- and sodium-ion batteries. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2021.139628] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
14
|
Kawamura S, Kawasaki R, Hino S, Yamana K, Okuno M, Eto T, Ikeda A. Formulation of water-dispersible hydrophobic compound nanocomplexes with polypeptides via a supramolecular approach using a high-speed vibration milling technique. RSC Adv 2022; 12:32012-32019. [DOI: 10.1039/d2ra06054j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2022] [Accepted: 11/02/2022] [Indexed: 11/10/2022] Open
Abstract
Polypeptides were used to solubilize functional hydrophobic molecules via a high-speed vibrational milling method.
Collapse
Affiliation(s)
- Shogo Kawamura
- Program of Applied Chemistry, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi Hiroshima, 739-8527, Japan
| | - Riku Kawasaki
- Program of Applied Chemistry, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi Hiroshima, 739-8527, Japan
| | - Shodai Hino
- Program of Applied Chemistry, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi Hiroshima, 739-8527, Japan
- Biomedical Research Institute, National Institute of Advanced Industrial Science and Technology, AIST, 1-8-31 Midorigaoka, Ikeda, 563-8577, Japan
| | - Keita Yamana
- Program of Applied Chemistry, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi Hiroshima, 739-8527, Japan
| | - Masafumi Okuno
- Program of Applied Chemistry, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi Hiroshima, 739-8527, Japan
| | - Takuro Eto
- Program of Applied Chemistry, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi Hiroshima, 739-8527, Japan
| | - Atsushi Ikeda
- Program of Applied Chemistry, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi Hiroshima, 739-8527, Japan
| |
Collapse
|
15
|
Baah M, Rahman A, Sibilia S, Trezza G, Ferrigno L, Micheli L, Maffucci A, Soboleva E, Svirko Y, Kuzhir P. Electrical impedance sensing of organic pollutants with ultrathin graphitic membranes. NANOTECHNOLOGY 2021; 33:075207. [PMID: 34757955 DOI: 10.1088/1361-6528/ac3861] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/12/2021] [Accepted: 11/10/2021] [Indexed: 06/13/2023]
Abstract
In this paper we propose an original approach for the real-time detection of industrial organic pollutants in water. It is based on the monitoring of the time evolution of the electrical impedance of low-cost graphitic nanomembranes. The developed approach exploits the high sensitivity of the impedance of 2D graphene-related materials to the adsorbents. We examined sensitivity of the nanomembranes based on pyrolyzed photoresist, pyrolytic carbon (PyC), and multilayer graphene films. In order to realize a prototype of a sensor capable of monitoring the pollutants in water, the membranes were integrated into an ad hoc printed circuit board. We demonstrated the correlation between the sensitivity of the electric impedance to adsorbents and the structure of the nanomembranes, and revealed that the amorphous PyC, being most homogeneous and adhesive to the SiO2substrate, is the most promising in terms of integration into industrial pollutants sensors.
Collapse
Affiliation(s)
- Marian Baah
- Department of Physics and Mathematics, Institute of Photonics, University of Eastern Finland, Joensuu, Finland
| | - Afifa Rahman
- Department of Physics and Mathematics, Institute of Photonics, University of Eastern Finland, Joensuu, Finland
| | - Sarah Sibilia
- Department of Electrical and Information Engineering, University of Cassino and Southern Lazio, Cassino, Italy
| | - Gianmarco Trezza
- Department of Electrical and Information Engineering, University of Cassino and Southern Lazio, Cassino, Italy
| | - Luigi Ferrigno
- Department of Electrical and Information Engineering, University of Cassino and Southern Lazio, Cassino, Italy
| | - Laura Micheli
- Department of Chemical Science and Technologies, University of Rome 'Tor Vergata', Rome, Italy
| | - Antonio Maffucci
- Department of Electrical and Information Engineering, University of Cassino and Southern Lazio, Cassino, Italy
| | | | - Yuri Svirko
- Department of Physics and Mathematics, Institute of Photonics, University of Eastern Finland, Joensuu, Finland
| | - Polina Kuzhir
- Department of Physics and Mathematics, Institute of Photonics, University of Eastern Finland, Joensuu, Finland
- Institute for Nuclear Problems of Belarusian State University, 220006 Minsk, Belarus
| |
Collapse
|
16
|
Liu S, Kang L, Jun SC. Challenges and Strategies toward Cathode Materials for Rechargeable Potassium-Ion Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2004689. [PMID: 33448099 DOI: 10.1002/adma.202004689] [Citation(s) in RCA: 92] [Impact Index Per Article: 30.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/08/2020] [Revised: 09/22/2020] [Indexed: 06/12/2023]
Abstract
With increasing demand for grid-scale energy storage, potassium-ion batteries (PIBs) have emerged as promising complements or alternatives to commercial lithium-ion batteries owing to the low cost, natural abundance of potassium resources, the low standard reduction potential of potassium, and fascinating K+ transport kinetics in the electrolyte. However, the low energy density and unstable cycle life of cathode materials hamper their practical application. Therefore, cathode materials with high capacities, high redox potentials, and good structural stability are required with the advancement toward next-generation PIBs. To this end, understanding the structure-dependent intercalation electrochemistry and recognizing the existing issues relating to cathode materials are indispensable prerequisites. This review summarizes the recent advances of PIB cathode materials, including metal hexacyanometalates, layered metal oxides, polyanionic frameworks, and organic compounds, with an emphasis on the structural advantages of the K+ intercalation reaction. Moreover, major current challenges with corresponding strategies for each category of cathode materials are highlighted. Finally, future research directions and perspectives are presented to accelerate the development of PIBs and facilitate commercial applications. It is believed that this review will provide practical guidance for researchers engaged in developing next-generation advanced PIB cathode materials.
Collapse
Affiliation(s)
- Shude Liu
- School of Mechanical Engineering, Yonsei University, Seoul, 120-749, South Korea
| | - Ling Kang
- Shanghai Key Laboratory of Multidimensional Information Processing, East China Normal University, 500 Dongchuan Road, Shanghai, 200241, China
| | - Seong Chan Jun
- School of Mechanical Engineering, Yonsei University, Seoul, 120-749, South Korea
| |
Collapse
|
17
|
Li D, Tang W, Tang F, Yan J, Jing L, Wang C, Yan Y, Xu L, Fan C. A Low-Cost Na-Ion and K-Ion Batteries Using a Common Organic Cathode and Bismuth Anode. CHEMSUSCHEM 2021; 14:3815-3820. [PMID: 34288500 DOI: 10.1002/cssc.202101386] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/02/2021] [Revised: 07/18/2021] [Indexed: 06/13/2023]
Abstract
Molecule-aggregation organic electrodes in principle have the capability for "single-molecule-energy-storage" in metal-ion rechargeable batteries, which indicates that the same organic electrode can be simultaneously applied to multiple metal-ion rechargeable batteries. In this study, the polyanionic organic compound 9,10-anthraquinone-2,6-disulfonate (Na2 AQ26DS, 130 mAh g-1 ) is used as a common cathode and metal bismuth (Bi) as a common anode to simultaneously assemble low-cost Na-ion and K-ion full cells. The Na-ion full cells can deliver the peak discharge capacity of 139 mAh g-1 cathode at 0.5-3.0 V, and the K-ion full cells can show the peak discharge capacity of 130 mAh g-1 cathode at 0.5-3.0 V. These results are comparable to the best organic-based Na-ion and K-ion full cells reported to date.
Collapse
Affiliation(s)
- Di Li
- School of Materials and Energy, University of Electronic Science and Technology of China (UESTC), Chengdu, 611731, P. R. China
| | - Wu Tang
- School of Materials and Energy, University of Electronic Science and Technology of China (UESTC), Chengdu, 611731, P. R. China
| | - Fan Tang
- School of Materials and Energy, University of Electronic Science and Technology of China (UESTC), Chengdu, 611731, P. R. China
| | - Jiaji Yan
- School of Materials and Energy, University of Electronic Science and Technology of China (UESTC), Chengdu, 611731, P. R. China
| | - Lvchuan Jing
- School of Materials and Energy, University of Electronic Science and Technology of China (UESTC), Chengdu, 611731, P. R. China
| | - Chuan Wang
- School of Materials and Energy, University of Electronic Science and Technology of China (UESTC), Chengdu, 611731, P. R. China
| | - Yichao Yan
- State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China (UESTC), Chengdu, 611731, P. R. China
| | - Liang Xu
- Department of Chemistry and Key Laboratory for Preparation and Application of Ordered Structural Materials of Guangdong Province, Shantou University, Shantou, 515063, P. R. China
| | - Cong Fan
- School of Materials and Energy, University of Electronic Science and Technology of China (UESTC), Chengdu, 611731, P. R. China
| |
Collapse
|
18
|
Go CY, Jang SS, Kim KC. Tailored Design of Electrochemically Degradable Anthraquinone Functionality toward Organic Cathodes. ACS APPLIED MATERIALS & INTERFACES 2021; 13:35729-35738. [PMID: 34288644 DOI: 10.1021/acsami.1c08167] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
In efforts to design organic cathode materials for rechargeable batteries, a fundamental understanding of the redox properties of diverse non-carbon-based functionalities incorporated into 9,10-anthraquinone is lacking despite their potential impact. Herein, a preliminary investigation of the potential of anthraquinones with halogenated nitrogen-based functionalities reveals that the Li-triggered structural collapse observed in the early stage of discharging can be ascribed to the preference toward the strong Lewis acid-base interaction of N-Li-X (X = F or Cl) over the repulsive interaction of the electron-rich N-X bond. A further study of three solutions (i.e., substitution of NX2 with (i) BX2, (ii) NH2, and (iii) BH2) to the structural decomposition issue highlights four conclusive remarks. First, the replacement of N and/or X with electron-deficient atom(s), such as B and/or H, relieves the repulsive force on the N-X bond without the assistance of Li, and thus, no structural decomposition occurs. Second, the incorporation of BH2 is verified to be the most beneficial for improving the theoretical performance. Third, all the redox properties are better correlated with electron affinity and solvation energy than the electronegativity of functionality, implying that these key parameters cooperatively contribute to the electrochemical redox potential; additionally, solvation energy plays a crucial role in determining cathodic deactivation. Fourth, the improvement to the Li storage capability of anthraquinone using the third solution can primarily be ascribed to solvation energy remaining at a negative value even after the binding of more Li atoms than the other derivatives.
Collapse
Affiliation(s)
- Chae Young Go
- Computational Materials Design Laboratory, Division of Chemical Engineering, Konkuk University, Seoul 05029, The Republic of Korea
| | - Seung Soon Jang
- Computational NanoBio Technology Laboratory, School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Ki Chul Kim
- Computational Materials Design Laboratory, Division of Chemical Engineering, Konkuk University, Seoul 05029, The Republic of Korea
| |
Collapse
|
19
|
Liu F, Liao S, Lin H, Yin Y, Liu Y, Meng H, Min Y. A Facile Strategy for Synthesizing Organic Tannic Metal Salts as Advanced Energy Storage Anodes. ChemElectroChem 2021. [DOI: 10.1002/celc.202100569] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Affiliation(s)
- Fang Liu
- School of Advanced Materials Peking University Shenzhen Graduate School Shenzhen 518055 China
| | - Songyi Liao
- School of Materials and Energy Guangdong University of Technology Guangzhou Guangdong 510006 China
| | - Hai Lin
- School of Advanced Materials Peking University Shenzhen Graduate School Shenzhen 518055 China
| | - Yawen Yin
- School of Advanced Materials Peking University Shenzhen Graduate School Shenzhen 518055 China
| | - Yidong Liu
- School of Materials and Energy Guangdong University of Technology Guangzhou Guangdong 510006 China
| | - Hong Meng
- School of Advanced Materials Peking University Shenzhen Graduate School Shenzhen 518055 China
| | - Yong Min
- School of Materials and Energy Guangdong University of Technology Guangzhou Guangdong 510006 China
| |
Collapse
|
20
|
Du X, Liu L, Xie Z, Yu D, Han L, Zhang Y, Cui Z, Xue Y, Zhao X, Liu X. Microwave‐Assisted Rapid Synthesis of Urchin‐Like Bimetallic Mn–Co Carbonate Composites for High‐Performance Supercapacitors. ChemistrySelect 2021. [DOI: 10.1002/slct.202101418] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Affiliation(s)
- Xiaomin Du
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Liangyu Liu
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Zhengjie Xie
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Deyang Yu
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Leiyun Han
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Yuwan Zhang
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Zheng Cui
- State Key Laboratory of Superhard Materials College of Physics Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Ying Xue
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Xudong Zhao
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| | - Xiaoyang Liu
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry Jilin University 2699 Qian Jin Street Changchun 130012 China
| |
Collapse
|
21
|
|
22
|
Li L, Yin YJ, Hei JP, Wan XJ, Li ML, Cui Y. Molecular Engineering of Aromatic Imides for Organic Secondary Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2005752. [PMID: 33544971 DOI: 10.1002/smll.202005752] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2020] [Revised: 11/22/2020] [Indexed: 06/12/2023]
Abstract
Aromatic imides are a class of attractive organic materials with inherently electroactive groups and large π electron-deficient scaffolds, which hold potential as electrode materials for organic secondary batteries (OSBs). However, the undecorated aromatic imides are usually plagued by low capacity, high solubility in electrolyte, and poor electronic/ionic conductivity. Molecular engineering has been demonstrated to be an effective strategy to address unsatisfying characteristics of the aromatic imides, thereby expanding their scope for applications in OSBs. In this review, the recent research progress in modulation of the capacity, dissolution, and electronic/ionic conductivity of aromatic imides for organic lithium batteries, organic sodium batteries, and redox flow batteries are summarized. In addition, the challenge and prospective of aromatic imides in organic secondary battery applications are also discussed.
Collapse
Affiliation(s)
- Lei Li
- School of Chemistry and Material Engineering, Chaohu University, Hefei, 238000, China
| | - Yan-Jun Yin
- School of Chemistry and Material Engineering, Chaohu University, Hefei, 238000, China
| | - Jin-Pei Hei
- School of Chemistry and Material Engineering, Chaohu University, Hefei, 238000, China
| | - Xin-Jun Wan
- School of Chemistry and Material Engineering, Chaohu University, Hefei, 238000, China
| | - Ming-Ling Li
- School of Chemistry and Material Engineering, Chaohu University, Hefei, 238000, China
| | - Yong Cui
- School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules and State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai, 200240, China
| |
Collapse
|
23
|
Kumankuma-Sarpong J, Tang S, Guo W, Fu Y. Naphthoquinone-Based Composite Cathodes for Aqueous Rechargeable Zinc-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES 2021; 13:4084-4092. [PMID: 33459008 DOI: 10.1021/acsami.0c21339] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Conventional organic batteries suffer from rapid capacity fading. Organic compounds are inclined to dissolve in the electrolyte and limit the long-term cycling performance of lithium-organic batteries. Carbon skeletons show efficacy in confining the active materials of organic cathodes. In this study, we investigate the electrochemical performance of aqueous zinc-ion batteries with binder-free composite cathodes consisting of carbon nanotubes (CNTs) and naphthoquinone (NQ)-based organics. The quinones are trapped in the nanoporous structure of the CNT framework, and thus the dissolution was minimized. The composite cathodes show stable and high rate cyclability, owing to the high electrical conductivity and confinement of the CNT network. The NQ composite cathode exhibits an initial capacity of 333.5 mAh g-1, close to the theoretical capacity of 339.0 mAh g-1. Furthermore, it is uncovered that modifying NQ with functional groups significantly impacts the electrochemical behavior, including the redox potential and capacity retention. With the electron-withdrawing or electron-donating groups, dichlone and 2-((4-hydroxyphenyl) amino) naphthalene-1,4-dione (APh-NQ) show better performance than NQ with improved capacity retention from 41.0 to 70.9 and 68.3%, respectively, after 1000 cycles. The work promotes the development of binder-free organic cathodes for the aqueous Zn-ion batteries and sheds light on designing high-performance electrodes for low-cost energy storage systems.
Collapse
Affiliation(s)
| | - Shuai Tang
- College of Chemistry, Zhengzhou University, Zhengzhou 450001, P. R. China
| | - Wei Guo
- College of Chemistry, Zhengzhou University, Zhengzhou 450001, P. R. China
| | - Yongzhu Fu
- College of Chemistry, Zhengzhou University, Zhengzhou 450001, P. R. China
| |
Collapse
|
24
|
Dham D, Roy B, Gowda A, Pan G, Sridhar A, Zeng X, Thandavarayan RA, Palaniyandi SS. 4-Hydroxy-2-nonenal, a lipid peroxidation product, as a biomarker in diabetes and its complications: challenges and opportunities. Free Radic Res 2021; 55:547-561. [PMID: 33336611 DOI: 10.1080/10715762.2020.1866756] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Over 30 million Americans are diagnosed with diabetes and this number is only expected to increase. There are various causes that induce complications with diabetes, including oxidative stress. In oxidative stress, lipid peroxidation-derived reactive carbonyl species such as 4-hydroxy-2-nonenal (4-HNE) is shown to cause damage in organs that leads to diabetic complications. We provided evidence to show that 4-HNE or/and 4-HNE-protein adducts are elevated in various organ systems of diabetic patients and animal models. We then discussed the advantages and disadvantages of different methodologies used for the detection of 4-HNE in diabetic tissues. We also discussed how novel approaches such as electrochemistry and nanotechnology can be used for monitoring 4-HNE levels in biological systems in real-time. Thus, this review enlightens the involvement of 4-HNE in the pathogenesis of diabetes and its complications and efficient methods to identify it. Furthermore, the article presents that 4-HNE can be developed as a biomarker for end-organ damage in diabetes such as diabetic cardiac complications.
Collapse
Affiliation(s)
- Deiva Dham
- Division of Hypertension and Vascular Research, Department of Internal Medicine, Henry Ford Health System, Detroit, MI, USA
| | - Bipradas Roy
- Division of Hypertension and Vascular Research, Department of Internal Medicine, Henry Ford Health System, Detroit, MI, USA
| | - Amita Gowda
- Division of Hypertension and Vascular Research, Department of Internal Medicine, Henry Ford Health System, Detroit, MI, USA
| | - Guodong Pan
- Division of Hypertension and Vascular Research, Department of Internal Medicine, Henry Ford Health System, Detroit, MI, USA
| | - Arun Sridhar
- Department of Chemistry, Oakland University, Rochester, MI, USA
| | - Xiangqun Zeng
- Department of Chemistry, Oakland University, Rochester, MI, USA
| | - Rajarajan A Thandavarayan
- Department of Cardiovascular Sciences, Centre for Cardiovascular Regeneration, Houston Methodist Research Institute, Houston, TX, USA
| | - Suresh Selvaraj Palaniyandi
- Division of Hypertension and Vascular Research, Department of Internal Medicine, Henry Ford Health System, Detroit, MI, USA.,Department of Physiology, Wayne State University, Detroit, MI, USA
| |
Collapse
|
25
|
Shi JL, Xiang SQ, Su DJ, He R, Zhao LB. Revealing practical specific capacity and carbonyl utilization of multi-carbonyl compounds for organic cathode materials. Phys Chem Chem Phys 2021; 23:13159-13169. [PMID: 34076658 DOI: 10.1039/d1cp01645h] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Organic carbonyl compounds are regarded as promising candidates for next-generation rechargeable batteries due to their low cost, environmentally benign nature, and high capacity. The carbonyl utilization is a key issue that limits the practical specific capacity of multi-carbonyl compounds. In this work, a combination of thermodynamic computation and electronic structure analysis is carried out to study the influence of carbonyl type and carbonyl number on the electrochemical performance of a series of multi-carbonyl compounds by using density functional theory (DFT) calculations. By comparing discharge profiles of six tetraone compounds with different carbonyl sites, it is demonstrated that pentacene-5,7,12,14-tetraone (PT) with para-dicarbonyl and pyrene-4,5,9,10-tetraone (PTO) with ortho-dicarbonyl undergo four-lithium transfer while the other four compounds with meta-dicarbonyl fragments show only two-lithium transfer during the discharge process. By further increasing the carbonyl number, the electrochemical performance of molecules with similar para-dicarbonyl sites to PT can not be strongly improved. Among all the studied multi-carbonyl compounds, triphenylene-2,3,6,7,10,11-hexaone (TPHA) and tribenzo[f,k,m]tetraphen-2,3,6,7,11,12,15,16-octaone (TTOA) with similar ortho-dicarbonyl sites to PTO exhibit the best electrochemical performance due to simultaneous high specific capacity and high discharge voltage. Our results offer evidence that conjugated multiple-carbonyl molecules with ortho-dicarbonyl sites are promising in developing high energy-density organic rechargeable batteries.
Collapse
Affiliation(s)
- Jun-Lin Shi
- Department of Chemistry, School of Chemistry and Chemical Engineering, Southwest University, Chongqing, 400715, China.
| | - Shi-Qin Xiang
- Department of Chemistry, School of Chemistry and Chemical Engineering, Southwest University, Chongqing, 400715, China.
| | - Dai-Jian Su
- Department of Chemistry, School of Chemistry and Chemical Engineering, Southwest University, Chongqing, 400715, China.
| | - Rongxing He
- Department of Chemistry, School of Chemistry and Chemical Engineering, Southwest University, Chongqing, 400715, China.
| | - Liu-Bin Zhao
- Department of Chemistry, School of Chemistry and Chemical Engineering, Southwest University, Chongqing, 400715, China.
| |
Collapse
|
26
|
Wang Z, Jin W, Huang X, Lu G, Li Y. Covalent Organic Frameworks as Electrode Materials for Metal Ion Batteries: A Current Review. CHEM REC 2020; 20:1198-1219. [PMID: 32881320 DOI: 10.1002/tcr.202000074] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2020] [Revised: 07/29/2020] [Accepted: 07/31/2020] [Indexed: 12/14/2022]
Abstract
As the world moves toward electromobility, our daily lives are flooded with variety of lithium ion batteries (LIBs), and the concerns of cost, safety and environmental friendliness of LIBs spring up in the minds of scientists. Although organic electrodes have been considered as promising alternatives to their inorganic counterparts, some intrinsic weaknesses still plague scientists, such as high solubility, low conductivity and sluggish ion diffusion. The emergence of covalent organic frameworks (COFs) attracts our attention because of their robust networks and open pores that could facilitate the infiltration of electrolyte ions when used as electrodes for metal-ion batteries (MIBs). In this review, we summarized the recent progress of COFs as electrode materials, and the strategies toward enhancing electrochemical performance of COF-based electrode in MIBs are discussed. Hopefully, this review will provide a fundamental guidance for future development of COF-based electrodes.
Collapse
Affiliation(s)
- Zhaolei Wang
- Key Laboratory of Synthetic and Self-Assembly Chemistry for Organic Functional Molecules, Center for Excellence in Molecular Synthesis, Shanghai Institute of Organic Chemistry, University of Chinese Academy of Sciences, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032, People's Republic of China
| | - Weize Jin
- Key Laboratory of Synthetic and Self-Assembly Chemistry for Organic Functional Molecules, Center for Excellence in Molecular Synthesis, Shanghai Institute of Organic Chemistry, University of Chinese Academy of Sciences, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032, People's Republic of China
| | - Xiaoyu Huang
- Key Laboratory of Synthetic and Self-Assembly Chemistry for Organic Functional Molecules, Center for Excellence in Molecular Synthesis, Shanghai Institute of Organic Chemistry, University of Chinese Academy of Sciences, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032, People's Republic of China.,School of Physical Science & Technology, ShanghaiTech University, 100 Haike Road, Shanghai, 201210, People's Republic of China
| | - Guolin Lu
- Key Laboratory of Synthetic and Self-Assembly Chemistry for Organic Functional Molecules, Center for Excellence in Molecular Synthesis, Shanghai Institute of Organic Chemistry, University of Chinese Academy of Sciences, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032, People's Republic of China
| | - Yongjun Li
- Key Laboratory of Synthetic and Self-Assembly Chemistry for Organic Functional Molecules, Center for Excellence in Molecular Synthesis, Shanghai Institute of Organic Chemistry, University of Chinese Academy of Sciences, Chinese Academy of Sciences, 345 Lingling Road, Shanghai, 200032, People's Republic of China
| |
Collapse
|
27
|
Rhodes Z, Cabrera‐Pardo JR, Li M, Minteer SD. Electrochemical Advances in Non‐Aqueous Redox Flow Batteries. Isr J Chem 2020. [DOI: 10.1002/ijch.202000049] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Zayn Rhodes
- Department of Chemistry University of Utah 315 South 1400 East Salt Lake City UT, 84112 U.S.A
- Joint Center for Energy Storage Research Department of Energy U.S.A
| | - Jaime R. Cabrera‐Pardo
- Department of Chemistry University of Utah 315 South 1400 East Salt Lake City UT, 84112 U.S.A
- Joint Center for Energy Storage Research Department of Energy U.S.A
| | - Min Li
- Department of Chemistry University of Utah 315 South 1400 East Salt Lake City UT, 84112 U.S.A
- Joint Center for Energy Storage Research Department of Energy U.S.A
| | - Shelley D. Minteer
- Department of Chemistry University of Utah 315 South 1400 East Salt Lake City UT, 84112 U.S.A
- Joint Center for Energy Storage Research Department of Energy U.S.A
- Department of Chemistry University of Utah 315 South 1400 East Salt Lake City UT 84112 U.S.A
| |
Collapse
|
28
|
Huang J, Dong X, Guo Z, Wang Y. Progress of Organic Electrodes in Aqueous Electrolyte for Energy Storage and Conversion. Angew Chem Int Ed Engl 2020; 59:18322-18333. [PMID: 32329546 DOI: 10.1002/anie.202003198] [Citation(s) in RCA: 39] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2020] [Revised: 04/17/2020] [Indexed: 12/16/2022]
Abstract
Aqueous batteries using inorganic compounds as electrode materials are considered a promising solution for grid-scale energy storage, while wide application is limited by the short life and/or high cost of electrodes. Organics with carbonyl groups are being investigated as the alternative to inorganic electrode materials because they offer the advantages of tunable structures, renewability, and they are environmentally benign. Furthermore, the wide internal space of such organic materials enables flexible storage of various charged ions (for example, H+ , Li+ , Na+ , K+ , Zn2+ , Mg2+ , and Ca2+ , and so on). We offer a comprehensive overview of the progress of organics containing carbonyls for energy storage and conversion in aqueous electrolytes, including applications in aqueous batteries as solid-state electrodes, in flow batteries as soluble redox species, and in water electrolysis as redox buffer electrodes. The advantages of organic electrodes are summarized, with a discussion of the challenges remaining for their practical application.
Collapse
Affiliation(s)
- Jianhang Huang
- Department of Chemistry, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China.,School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang, 330063, China
| | - Xiaoli Dong
- Department of Chemistry, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China
| | - Zhaowei Guo
- Department of Chemistry, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China
| | - Yonggang Wang
- Department of Chemistry, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China
| |
Collapse
|
29
|
Huang J, Dong X, Guo Z, Wang Y. Progress of Organic Electrodes in Aqueous Electrolyte for Energy Storage and Conversion. Angew Chem Int Ed Engl 2020. [DOI: 10.1002/ange.202003198] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Jianhang Huang
- Department of Chemistry Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University Shanghai 200433 China
- School of Materials Science and Engineering Nanchang Hangkong University Nanchang 330063 China
| | - Xiaoli Dong
- Department of Chemistry Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University Shanghai 200433 China
| | - Zhaowei Guo
- Department of Chemistry Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University Shanghai 200433 China
| | - Yonggang Wang
- Department of Chemistry Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University Shanghai 200433 China
| |
Collapse
|
30
|
Wang Y, Wang C, Ni Z, Gu Y, Wang B, Guo Z, Wang Z, Bin D, Ma J, Wang Y. Binding Zinc Ions by Carboxyl Groups from Adjacent Molecules toward Long-Life Aqueous Zinc-Organic Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2000338. [PMID: 32141139 DOI: 10.1002/adma.202000338] [Citation(s) in RCA: 102] [Impact Index Per Article: 25.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/15/2020] [Revised: 02/14/2020] [Accepted: 02/22/2020] [Indexed: 06/10/2023]
Abstract
The newly emerged aqueous Zn-organic batteries are attracting extensive attention as a promising candidate for energy storage. However, most of them suffer from the unstable and/or soluble nature of organic molecules, showing limited cycle life (≤3000 cycles) that is far away from the requirement (10 000 cycles) for grid-scale energy storage. Here, a new aqueous zinc battery is proposed by using sulfur heterocyclic quinone dibenzo[b,i]thianthrene-5,7,12,14-tetraone (DTT) as the cathode. The cell shows a high reversible capacity of 210.9 mAh gDTT -1 at 50 mA gDTT -1 with a high mass loading of 5 mgDTT cm-2 , along with a fast kinetics for charge storage. Electrochemical measurements, ex situ analyses, and density functional theory calculation successfully demonstrate that the DTT electrode can simultaneously store both protons (H+ ) and Zn2+ to form DTT2 (H+ )4 (Zn2+ ), where Zn2+ is bound to the carboxyl groups from the adjacent DTT molecules with improved stability. Benefitting from the improved molecular stability and the inherent low solubility of DTT and related discharge products, the DTT//Zn full cell exhibits a superlong life of 23 000 cycles with a capacity retention of 83.8%, which is much superior to previous reports.
Collapse
Affiliation(s)
- Yanrong Wang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University, Shanghai, 200433, China
| | - Caixing Wang
- Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, Jiangsu, 210023, China
| | - Zhigang Ni
- Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, Jiangsu, 210023, China
| | - Yuming Gu
- Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, Jiangsu, 210023, China
| | - Bingliang Wang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University, Shanghai, 200433, China
| | - Zhaowei Guo
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University, Shanghai, 200433, China
| | - Zhuo Wang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University, Shanghai, 200433, China
| | - Duan Bin
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University, Shanghai, 200433, China
| | - Jing Ma
- Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, Jiangsu, 210023, China
| | - Yonggang Wang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University, Shanghai, 200433, China
| |
Collapse
|
31
|
Poizot P, Gaubicher J, Renault S, Dubois L, Liang Y, Yao Y. Opportunities and Challenges for Organic Electrodes in Electrochemical Energy Storage. Chem Rev 2020; 120:6490-6557. [DOI: 10.1021/acs.chemrev.9b00482] [Citation(s) in RCA: 293] [Impact Index Per Article: 73.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Affiliation(s)
- Philippe Poizot
- Université de Nantes, CNRS, Institut des Matériaux Jean Rouxel, IMN, F-44000 Nantes, France
| | - Joël Gaubicher
- Université de Nantes, CNRS, Institut des Matériaux Jean Rouxel, IMN, F-44000 Nantes, France
| | - Stéven Renault
- Université de Nantes, CNRS, Institut des Matériaux Jean Rouxel, IMN, F-44000 Nantes, France
| | - Lionel Dubois
- Université Grenoble Alpes, CEA, CNRS, IRIG,
SyMMES, 38000 Grenoble, France
| | - Yanliang Liang
- Department of Electrical and Computer Engineering and Texas Center for Superconductivity, University of Houston, Houston, Texas 77204, United States
| | - Yan Yao
- Department of Electrical and Computer Engineering and Texas Center for Superconductivity, University of Houston, Houston, Texas 77204, United States
| |
Collapse
|
32
|
Zahra T, Ahmad KS, Thomas AG, Zequine C, Malik MA, Gupta RK. Organic template-based ZnO embedded Mn 3O 4 nanoparticles: synthesis and evaluation of their electrochemical properties towards clean energy generation. RSC Adv 2020; 10:9854-9867. [PMID: 35498591 PMCID: PMC9050345 DOI: 10.1039/c9ra10472k] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/12/2019] [Accepted: 01/31/2020] [Indexed: 12/15/2022] Open
Abstract
To deal with fossil fuel depletion and the rise in global temperatures caused by fossil fuels, cheap and abundant materials are required, in order to fulfill energy demand by developing high-performance fuel cells and electrocatalysts. In this work, a natural organic agent has been used to synthesize nano-structured ZnO/Mn3O4 with high surface area and enhanced electrocatalytic performance. Upon pre-annealing treatment, mixed metal oxide precipitates are formed due to the complex formation between a metal oxide and organic extract. The thermally annealed mixed oxide ZnO/Mn3O4 was characterized by XRD diffractometer, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). Gas chromatography-mass spectrometry (GC-MS) identified methyldecylamine as a major stabilizing agent of the synthesized nanomaterial. Using a Tauc plot, the calculated band energy for the synthesized ZnO/Mn3O4 mixed metal oxide was 1.65 eV. Moreover, we have demonstrated the effects of incorporated organic compounds on the surface chemistry, morphology and electrochemical behavior of ZnO/Mn3O4. The phyto-functionalized ZnO/Mn3O4 was deposited on Ni-foam for electrocatalytic studies. The fabricated electrode revealed good performance with low over-potential and Tafel slope, suggesting it to be suitable as a potential catalyst for water splitting application, in particular for the oxygen evolution reaction (OER). The overall findings of the current study provide a cost-effective and efficient organic template for functionalization and sustainable fabrication of ZnO/Mn3O4 nanomaterial for application as an electrocatalyst. To deal with fossil fuel depletion and the rise in global temperatures caused by fossil fuels, cheap and abundant materials are required, in order to fulfill energy demand by developing high-performance fuel cells and electrocatalysts.![]()
Collapse
Affiliation(s)
- Taghazal Zahra
- Department of Environmental Sciences, Fatima Jinnah Women University Rawalpindi Pakistan
| | - Khuram Shahzad Ahmad
- Department of Environmental Sciences, Fatima Jinnah Women University Rawalpindi Pakistan
| | - Andrew Guy Thomas
- Department of Materials, Photon Science Institute, Sir Henry Royce Institute, Alan Turing Building, The University of Manchester Oxford Road Manchester M13 9PL UK
| | - Camila Zequine
- Department of Chemistry, Pittsburg State University 1701 South Broadway Street Pittsburg KS 66762 USA
| | - Mohammad Azad Malik
- Department of Materials, Photon Science Institute, Sir Henry Royce Institute, Alan Turing Building, The University of Manchester Oxford Road Manchester M13 9PL UK
| | - Ram K Gupta
- Department of Chemistry, Pittsburg State University 1701 South Broadway Street Pittsburg KS 66762 USA
| |
Collapse
|
33
|
Shaheen I, Ahmad KS, Zequine C, Gupta RK, Thomas A, Malik MA. Organic template-assisted green synthesis of CoMoO 4 nanomaterials for the investigation of energy storage properties. RSC Adv 2020; 10:8115-8129. [PMID: 35497827 PMCID: PMC9049887 DOI: 10.1039/c9ra09477f] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2019] [Accepted: 01/14/2020] [Indexed: 11/21/2022] Open
Abstract
Transitional metal oxide nanomaterials are considered to be potential electrode materials for supercapacitors. Therefore, in the past few decades, huge efforts have been devoted towards the sustainable synthesis of metal oxide nanomaterials. Herein, we report a synergistic approach to synthesize spherical-shaped CoMoO4 electrode materials using an inorganic-organic template via the hydrothermal route. As per the synthesis strategy, the precursor solution was reacted with the organic compounds of E. cognata to tailor the surface chemistry and morphology of CoMoO4 by organic species. The modified CoMoO4 nanomaterials revealed a particle size of 23 nm by X-ray diffraction. Furthermore, the synthesized material was scrutinized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, field emission scanning electron microscopy and energy dispersive spectroscopy. The optical band gap energy of 3.6 eV was calculated by a Tauc plot. Gas chromatography-mass spectrometry identified cyclobutanol (C4H8O) and octodrine (C8H19N) as the major stabilizing agents of the CoMoO4 nanomaterial. Finally, it was revealed that the bioorganic framework-derived CoMoO4 electrode exhibited a capacitance of 294 F g-1 by cyclic voltammetry with a maximum energy density of 7.3 W h kg-1 and power density of 7227.525 W kg-1. Consequently, the nanofeatures and organic compounds of E. cognata were found to enhance the electrochemical behaviour of the CoMoO4-fabricated electrode towards supercapacitor applications.
Collapse
Affiliation(s)
- Irum Shaheen
- Department of Environmental Sciences, Fatima Jinnah Women University Rawalpindi Pakistan
| | - Khuram Shahzad Ahmad
- Department of Environmental Sciences, Fatima Jinnah Women University Rawalpindi Pakistan
| | - Camila Zequine
- Department of Chemistry, Pittsburg State University 1701 South Broadway Street Pittsburg KS 66762 USA
| | - Ram K Gupta
- Department of Chemistry, Pittsburg State University 1701 South Broadway Street Pittsburg KS 66762 USA
| | - Andrew Thomas
- Department of Materials, Photon Science Institute, Sir Henry Royce Institute, Alan Turing Building, The University of Manchester Oxford Road Manchester M13 9PL UK
| | - Mohammad Azad Malik
- Department of Materials, Photon Science Institute, Sir Henry Royce Institute, Alan Turing Building, The University of Manchester Oxford Road Manchester M13 9PL UK
| |
Collapse
|
34
|
Shaheen I, Ahmad KS, Zequine C, Gupta RK, Thomas AG, Malik MA. Green synthesis of ZnO–Co 3O 4 nanocomposite using facile foliar fuel and investigation of its electrochemical behaviour for supercapacitors. NEW J CHEM 2020. [DOI: 10.1039/d0nj03430d] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
Abstract
Currently, the sustainable fabrication of supercapacitors with enhanced properties is one of the significant research hotspots.
Collapse
Affiliation(s)
- Irum Shaheen
- Department of Environmental Sciences
- Fatima Jinnah Women University
- Rawalpindi
- Pakistan
| | - Khuram Shahzad Ahmad
- Department of Environmental Sciences
- Fatima Jinnah Women University
- Rawalpindi
- Pakistan
| | | | - Ram K. Gupta
- Department of Chemistry
- Pittsburg State University
- USA
| | - Andrew G. Thomas
- Department of Materials
- Photon Science Institute and Sir Henry Royce Institute
- Alan Turing Building The University of Manchester
- Manchester M13 9PL
- UK
| | - Mohammad Azad Malik
- Department of Materials
- Photon Science Institute and Sir Henry Royce Institute
- Alan Turing Building The University of Manchester
- Manchester M13 9PL
- UK
| |
Collapse
|