Functionalized Hybridization of 2D Nanomaterials

Application of 3D, 4D, 5D, and 6D bioprinting in cancer research: what does the future look like?

The application of three- and four-dimensional (3D/4D) printing in cancer research represents a significant advancement in understanding and addressing the complexities of cancer biology. 3D/4D materials provide more physiologically relevant environments compared to traditional two-dimensional models, allowing for a more accurate representation of the tumor microenvironment that enables researchers to study tumor progression, drug responses, and interactions with surrounding tissues under conditions similar to in vivo conditions. The dynamic nature of 4D materials introduces the element of time, allowing for the observation of temporal changes in cancer behavior and response to therapeutic interventions. The use of 3D/4D printing in cancer research holds great promise for advancing our understanding of the disease and improving the translation of preclinical findings to clinical applications. Accordingly, this review aims to briefly discuss 3D and 4D printing and their advantages and limitations in the field of cancer. Moreover, new techniques such as 5D/6D printing and artificial intelligence (AI) are also introduced as methods that could be used to overcome the limitations of 3D/4D printing and opened promising ways for the fast and precise diagnosis and treatment of cancer.

Atomically Substitutional Engineering of Transition Metal Dichalcogenide Layers for Enhancing Tailored Properties and Superior Applications

Transition metal dichalcogenides (TMDs) are a promising class of layered materials in the post-graphene era, with extensive research attention due to their diverse alternative elements and fascinating semiconductor behavior. Binary MX2 layers with different metal and/or chalcogen elements have similar structural parameters but varied optoelectronic properties, providing opportunities for atomically substitutional engineering via partial alteration of metal or/and chalcogenide atoms to produce ternary or quaternary TMDs. The resulting multinary TMD layers still maintain structural integrity and homogeneity while achieving tunable (opto)electronic properties across a full range of composition with arbitrary ratios of introduced metal or chalcogen to original counterparts (0-100%). Atomic substitution in TMD layers offers new adjustable degrees of freedom for tailoring crystal phase, band alignment/structure, carrier density, and surface reactive activity, enabling novel and promising applications. This review comprehensively elaborates on atomically substitutional engineering in TMD layers, including theoretical foundations, synthetic strategies, tailored properties, and superior applications. The emerging type of ternary TMDs, Janus TMDs, is presented specifically to highlight their typical compounds, fabrication methods, and potential applications. Finally, opportunities and challenges for further development of multinary TMDs are envisioned to expedite the evolution of this pivotal field.

Detection of human serum albumin using a rare-earth nanosheet fluorescent probe based on intensity and lifetime signals

Human serum albumin (HSA) is an important biomarker for early disease diagnosis. Therefore, the detection of HSA in biological samples is important. In this study, for the sensitive detection of HSA, a fluorescent probe based on Eu(III)-doped yttrium hydroxide nanosheets was designed and sensitized by α-thiophenformyl acetone trifluoride as an antenna. The morphology and structure of the as-prepared nanosheet fluorescent probe were studied by transmission electron microscopy and atomic force microscopy. A detailed investigation of the fluorescence properties of the as-obtained nanosheet probe revealed that the Eu(III) emission intensity was linearly and selectively enhanced by the consecutive addition of HSA. Furthermore, the lifetime signal of this probe was enhanced with increasing concentration. The sensitivity of the nanosheet probe to HSA is discussed based on the results of ultraviolet-visible, fluorescence, and infrared spectral analyses, the findings demonstrate that the nanosheet fluorescent probe we prepared is a highly sensitive and selective tool for detecting HSA concentration with a high intensity and a large lifetime change.

2D Nanomaterials and Their Drug Conjugates for Phototherapy and Magnetic Hyperthermia Therapy of Cancer and Infections

Photothermal therapy (PTT) and magnetic hyperthermia therapy (MHT) using 2D nanomaterials (2DnMat) have recently emerged as promising alternative treatments for cancer and bacterial infections, both important global health challenges. The present review intends to provide not only a comprehensive overview, but also an integrative approach of the state-of-the-art knowledge on 2DnMat for PTT and MHT of cancer and infections. High surface area, high extinction coefficient in near-infra-red (NIR) region, responsiveness to external stimuli like magnetic fields, and the endless possibilities of surface functionalization, make 2DnMat ideal platforms for PTT and MHT. Most of these materials are biocompatible with mammalian cells, presenting some cytotoxicity against bacteria. However, each material must be comprehensively characterized physiochemically and biologically, since small variations can have significant biological impact. Highly efficient and selective in vitro and in vivo PTTs for the treatment of cancer and infections are reported, using a wide range of 2DnMat concentrations and incubation times. MHT is described to be more effective against bacterial infections than against cancer therapy. Despite the promising results attained, some challenges remain, such as improving 2DnMat conjugation with drugs, understanding their in vivo biodegradation, and refining the evaluation criteria to measure PTT or MHT effects.

The Accumulation of Electrical Energy Due to the Quantum-Dimensional Effects and Quantum Amplification of Sensor Sensitivity in a Nanoporous SiO2 Matrix Filled with Synthetic Fulvic Acid

A heterostructured nanocomposite MCM-41<SFA> was formed using the encapsulation method, where a silicon dioxide matrix-MCM-41 was the host matrix and synthetic fulvic acid was the organic guest. Using the method of nitrogen sorption/desorption, a high degree of monoporosity in the studied matrix was established, with a maximum for the distribution of its pores with radii of 1.42 nm. According to the results of an X-ray structural analysis, both the matrix and the encapsulate were characterized by an amorphous structure, and the absence of a manifestation of the guest component could be caused by its nanodispersity. The electrical, conductive, and polarization properties of the encapsulate were studied with impedance spectroscopy. The nature of the changes in the frequency behavior of the impedance, dielectric permittivity, and tangent of the dielectric loss angle under normal conditions, in a constant magnetic field, and under illumination, was established. The obtained results indicated the manifestation of photo- and magneto-resistive and capacitive effects. In the studied encapsulate, the combination of a high value of ε and a value of the tgδ of less than 1 in the low-frequency range was achieved, which is a prerequisite for the realization of a quantum electric energy storage device. A confirmation of the possibility of accumulating an electric charge was obtained by measuring the I-V characteristic, which took on a hysteresis behavior.

Potential and Progress of 2D Materials in Photomedicine for Cancer Treatment

Over the last decades, photomedicine has made a significant impact and progress in treating superficial cancer. With tremendous efforts many of the technologies have entered clinical trials. Photothermal agents (PTAs) have been considered as emerging candidates for accelerating the outcome from photomedicine based cancer treatment. Besides various inorganic and organic candidates, 2D materials such as graphene, boron nitride, and molybdenum disulfide have shown significant potential for photothermal therapy (PTT). The properties such as high surface area to volume, biocompatibility, stability in physiological media, ease of synthesis and functionalization, and high photothermal conversion efficiency have made 2D nanomaterials wonderful candidates for PTT to treat cancer. The targeting or localized activation could be achieved when PTT is combined with chemotherapies, immunotherapies, or photodynamic therapy (PDT) to provide better outcomes with fewer side effects. Though significant development has been made in the field of phototherapeutic drugs, several challenges have restricted the use of PTT in clinical use and hence they have not yet been tested in large clinical trials. In this review, we attempted to discuss the progress, properties, applications, and challenges of 2D materials in the field of PTT and their application in photomedicine.

Searching guidelines for scalable and controllable design of multifunctional materials and hybrid interfaces: Status and perspective

The urgent need to address the global sustainability issues that modern society is currently facing requires the development of micro and nanotechnologies, which rely largely on functional materials. Beyond studies focused solely on low-dimensional materials, broader research related to multifunctionality has shown that the major efforts to meet these criteria for new electronic, photonic, and optoelectronic concepts, particularly to achieve high-performance devices, are still challenging. By exploiting their unique properties, a comprehensive understanding of the implications of research for the synthesis and discovery of novel materials is obtained. The present article encompasses innovation research as an alternative optimization and design for sustainable energy development, bridging the scaling gap in atomically controlled growth in terms of surface heterogeneity and interfacial engineering. In addition, the corresponding research topics are widely regarded as a scientometric analysis and visualization for the evaluation of scientific contributions into the early 20 years of the 21st century. In this perspective, a brief overview of the global trends and current challenges toward high-throughput fabrication followed by a scenario-based future for hybrid integration and emerging structural standards of scalable control design and growth profiles are emphasized. Finally, these opportunities are unprecedented to overcome current limitations, creating numerous combinations and triggering new functionalities and unparalleled properties for disruptive innovations of Frontier technologies.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Study of the Thermoelectric Properties of Bi2Te3/Sb2Te3 Core-Shell Heterojunction Nanostructures

Thermoelectric materials convert heat energy into electricity, hold promising capabilities for energy waste harvesting, and may be the future of sustainable energy utilization. In this work, we successfully synthesized core-shell Bi₂Te₃/Sb₂Te₃ (BTST) nanostructured heterojunctions via a two-step solution route. Samples with different Bi₂Te₃ core to Sb₂Te₃ shell ratios could be synthesized by controlling the reaction precursors. Scanning electron microscopy images show well-defined hexagonal nanoplates and the distinct interfaces between Bi₂Te₃ and Sb₂Te₃. The similarity of the area ratios with the precursor ratios indicates that the growth of the Sb₂Te₃ shell mostly took place on the lateral direction rather than the vertical. Transmission electron microscopy revealed the crystalline nature of the as-synthesized Bi₂Te₃ core and Sb₂Te₃ shell. Energy-dispersive X-ray spectroscopy verified the lateral growth of a Sb₂Te₃ shell on the Bi₂Te₃ core. Thermoelectric properties were measured on pellets obtained from powders via spark plasma sintering with two different directions, in-plane and out-of-plane, showing anisotropic properties due to the nanostructure alignment in the pellets. All samples showed a degenerate semiconducting character with the electrical resistivity increasing with the temperature. Starting from Sb₂Te₃, the electrical resistivity increases with the increase in amounts of Bi₂Te₃. Thermal conductivity is lowered due to the increase in interfaces and additional phonon scattering. We show that the out-of-plane direction of the BTST 1-3 sample (where 1-3 indicates the ratio of BT to ST) demonstrates a high Seebeck value of 145 μV/K at 500 K which may be attributed to an energy filtering effect across the heterojunction interfaces. The highest overall zT is observed for the BTST 1-3 sample in the out-of-plane direction at 500 K. The zT values increase continuously over the measured temperature range, indicating a probable higher value at increased temperatures.

Preparation of 2D Graphene/MXene nanocomposite for the electrochemical determination of hazardous bisphenol A in plastic products

Bisphenol A (BPA) is one of the major contaminants with significant health hazards, which could also affect the endocrine system or induce cancer. It is essential to develop a highly sensitive and selective BPA sensor for environmental and food safety. Herein, 2D hybrid graphene/Ti₃C₂T_x nanocomposite (Gr/MXene) was prepared via a top-down method and then used to fabricate an electrochemical BPA sensor. The X-ray diffraction spectrometer (XRD) and Raman spectroscopy analysis were carried out to verify the successful formation of Gr sheets with MXene. The high resolution scanning electron microscopy (HR-SEM) was revealed the formation of MXene, and Gr/MXene nanocomposite. Furthermore, the 2D hybrid Gr/MXene nanocomposite modified glassy carbon electrode (GCE) was prepared for BPA oxidation in 100 mM phosphate buffer solution (PBS). Under the optimized condition, the Gr/MXene/GCE was displayed a linear range of detection from 10 to 180 nM and 1 to 10 μM BPA with the detection limits of 4.08 nM and 0.35 μM by amperometry and differential pulse voltammetry (DPV), respectively. Moreover, the proposed Gr/MXene modified electrode exhibited excellent stability, selectivity, repeatability and reproducibility towards the BPA detection. As a proof of concept, Gr/MXene modified sensor was effectively used to detect BPA in modern plastic products with the recovery ranging from 99.2 to 104.5%.

Atomic-Layer-Deposition-Based 2D Transition Metal Chalcogenides: Synthesis, Modulation, and Applications

Transition metal chalcogenides (TMCs) are a large family of 2D materials with different properties, and are promising candidates for a wide range of applications such as nanoelectronics, sensors, energy conversion, and energy storage. In the research of new materials, the development and investigation of industry-compatible synthesis techniques is of key importance. In this respect, it is important to study 2D TMC materials synthesized by the atomic layer deposition (ALD) technique, which is widely applied in industries. In addition to the synthesis of 2D TMCs, ALD is used to modulate the characteristic of 2D TMCs such as their carrier density and morphology. So far, the improvement of thin film uniformity without oxidation and the synthesis of low-dimensional nanomaterials on 2D TMCs have been the research focus. Herein, the synthesis and modulation of 2D TMCs by ALD is described, and the characteristics of ALD-based TMCs used in nanoelectronics, sensors, and energy applications are discussed.

High surface area nitrogen-functionalized Ni nanozymes for efficient peroxidase-like catalytic activity

Nitrogen-functionalization is an effective means of improving the catalytic performances of nanozymes. In the present work, plasma-assisted nitrogen modification of nanocolumnar Ni GLAD films was performed using an ammonia plasma, resulting in an improvement in the peroxidase-like catalytic performance of the porous, nanostructured Ni films. The plasma-treated nanozymes were characterized by TEM, SEM, XRD, and XPS, revealing a nitrogen-rich surface composition. Increased surface wettability was observed after ammonia plasma treatment, and the resulting nitrogen-functionalized Ni GLAD films presented dramatically enhanced peroxidase-like catalytic activity. The optimal time for plasma treatment was determined to be 120 s; when used to catalyze the oxidation of the colorimetric substrate TMB in the presence of H2O2, Ni films subjected to 120 s of plasma treatment yielded a much higher maximum reaction velocity (3.7⊆10-8 M/s vs. 2.3⊆10-8 M/s) and lower Michaelis-Menten coefficient (0.17 mM vs. 0.23 mM) than pristine Ni films with the same morphology. Additionally, we demonstrate the application of the nanozyme in a gravity-driven, continuous catalytic reaction device. Such a controllable plasma treatment strategy may open a new door toward surface-functionalized nanozymes with improved catalytic performance and potential applications in flow-driven point-of-care devices.

Recent Advances on Transition Metal Dichalcogenides for Electrochemical Energy Conversion

Transition metal dichalcogenides (TMDCs) hold great promise for electrochemical energy conversion technologies in view of their unique structural features associated with the layered structure and ultrathin thickness. Because the inert basal plane accounts for the majority of a TMDC's bulk, activation of the basal plane sites is necessary to fully exploit the intrinsic potential of TMDCs. Here, recent advances on TMDCs-based hybrids/composites with greatly enhanced electrochemical activity are reviewed. After a summary of the synthesis of TMDCs with different sizes and morphologies, comprehensive in-plane activation strategies are described in detail, mainly including in-plane-modification-induced phase transformation, surface-layer modulation, and interlayer modification/coupling. Simultaneously, the underlying mechanisms for improved electrochemical activities are highlighted. Finally, the strategic evaluation on further research directions of TMDCs in-plane activation is featured. This work would shed some light on future design trends of TMDCs-based functional materials for electrochemical energy-related applications.

MoS2/PPy Nanocomposite as a Transducer for Electrochemical Aptasensor of Ampicillin in River Water

We report the design of an electrochemical aptasensor for ampicillin detection, which is an antibiotic widely used in agriculture and considered to be a water contaminant. We studied the transducing potential of nanostructure composed of MoS2 nanosheets and conductive polypyrrole nanoparticles (PPyNPs) cast on a screen-printed electrode. Fine chemistry is developed to build the biosensors entirely based on robust covalent immobilizations of naphthoquinone as a redox marker and the aptamer. The structural and morphological properties of the nanocomposite were studied by SEM, AFM, and FT-IR. High-resolution XPS measurements demonstrated the formation of a binding between the two nanomaterials and energy transfer affording the formation of heterostructure. Cyclic voltammetry and electrochemical impedance spectroscopy were used to analyze their electrocatalytic properties. We demonstrated that the nanocomposite formed with PPyNPs and MoS2 nanosheets has electro-catalytic properties and conductivity leading to a synergetic effect on the electrochemical redox process of the redox marker. Thus, a highly sensitive redox process was obtained that could follow the recognition process between the apatamer and the target. An amperometric variation of the naphthoquinone response was obtained regarding the ampicillin concentration with a limit of detection (LOD) of 10 pg/L (0.28 pM). A high selectivity towards other contaminants was demonstrated with this biosensor and the analysis of real river water samples without any treatment showed good recovery results thanks to the antifouling properties. This biosensor can be considered a promising device for the detection of antibiotics in the environment as a point-of-use system.

One-pot bottom-up synthesis of a 2D graphene derivative: application in biomolecular recognition and nanozyme activity

The synthesis of two-dimensional (2D) nanosheets such as graphene and its derivatives through a bottom-up approach has many advantages such as growth control and functionalization, but it is always challenging to get the desired material. Herein, we have reported the synthesis of water soluble 2D-nanosheets through a bottom-up approach from 2,4,6-tribromo-3-hydroxybenzoic acid via a self-coupling pathway and characterized them using several techniques. AFM and TEM analyses reveal that the synthesized material has a layered structure with a thickness of ∼1.2 nm. Also, the prepared nanosheets are amorphous in nature with high negative charge (-38 ± 2.5 mV). The flexible nature of 2D-nanosheets and their functionality can be used in many related applications. Therefore, we have utilized the synthesized 2D-nanosheets in biomolecular recognition studies. It was found that the enzymatic activity of α-chymotrypsin can be controlled reversibly in the presence of the synthesized 2D-nanosheets. The kinetic study revealed that the nanosheet surface selectively binds to the active sites of the enzyme through a competitive pathway. Furthermore, we explored the nanozyme activity of the material in a peroxidase-like activity assay of two bio-active molecules: Nicotinamide Adenine Dinucleotide Phosphate (NADH) and dopamine. The results suggest that the prepared material efficiently catalyzed the oxidation of NADH to biological cofactor NAD⁺ and dopamine to aminochrome in the presence of H₂O₂. These synthesized graphene-like 2D-nanosheets with functional groups can be further tuned with other functionalities, which can open a new window for other related applications.

Metal-facilitated Photocatalytic Nanohybrids: Rational Design and Promising Environmental Applications

As a promising technique to potentially address the energy crisis and environmental issues, photocatalysis has been reported widely to exhibit various outstanding behaviors in production of new fuels/chemicals and treatment of contaminants. The photocatalytic performance is extremely dependent on the used photocatalysts, so that the design and preparation of efficient photocatalysts are critically important for significantly improving the photocatalytic activity. Among various strategies, the hybridization of metal with semiconductors has recently been attracting more and more research interest owing to their expended spectral absorption, promoted transferring rate of charge carriers and Plasmon-enhanced effect. In this minireview, the metal-facilitated hybrid photocatalysts are overviewed comprehensively to first reveal unique functions of metals in improvement of photoactivity and summarize the emerging metal-involved hybrid systems. Subsequently, the synthetic methods towards hybrid photocatalysts are introduced and their practical applications are emphasized in environmental remediation including degradation of organic pollutants, conversion of harmful gases, treatment of heavy metal ions and sterilization of bacteria. At the end, the challenges for industrializing these hybrid photocatalysts are discussed carefully and future development is suggested rationally.

Silicane Derivative Increases Doxorubicin Efficacy in an Ovarian Carcinoma Mouse Model: Fighting Drug Resistance

The development of cancer resistance continues to represent a bottleneck of cancer therapy. It is one of the leading factors preventing drugs to exhibit their full therapeutic potential. Consequently, it reduces the efficacy of anticancer therapy and causes the survival rate of therapy-resistant patients to be far from satisfactory. Here, an emerging strategy for overcoming drug resistance is proposed employing a novel two-dimensional (2D) nanomaterial polysiloxane (PSX). We have reported on the synthesis of PSX nanosheets (PSX NSs) and proved that they have favorable properties for biomedical applications. PSX NSs evinced unprecedented cytocompatibility up to the concentration of 300 μg/mL, while inducing very low level of red blood cell hemolysis and were found to be highly effective for anticancer drug binding. PSX NSs enhanced the efficacy of the anticancer drug doxorubicin (DOX) by around 27.8-43.4% on average and, interestingly, were found to be especially effective in the therapy of drug-resistant tumors, improving the effectiveness of up to 52%. Fluorescence microscopy revealed improved retention of DOX within the drug-resistant cells when bound on PSX NSs. DOX bound on the surface of PSX NSs, i.e., PSX@DOX, improved, in general, the DOX cytotoxicity in vitro. More importantly, PSX@DOX reduced the growth of DOX-resistant tumors in vivo with 3.5 times better average efficiency than the free drug. Altogether, this paper represents an introduction of a new 2D nanomaterial derived from silicane and pioneers its biomedical application. As advances in the field of material synthesis are rapidly progressing, novel 2D nanomaterials with improved properties are being synthesized and await thorough exploration. Our findings further provide a better understanding of the mechanisms involved in the cancer resistance and can promote the development of a precise cancer therapy.

Theoretical Study on Tuning Band Gap and Electronic Properties of Atomically Thin Nanostructured MoS2/Metal Cluster Heterostructures

Nano-heterostructures have attracted immense attention recently due to their remarkable interfacial properties determined by the heterointerface of different nanostructures. Here, using first-principles density functional theory (DFT) calculations, we examine what range the variable electronic properties such as the electronic band gap can be tuned by combining two dissimilar nanostructures consisting of atomically thin nanostructured MoS2 clusters with small silver and gold nanoparticles (Ag/Au NPs). Most interestingly, our calculations show that the electronic band gap of the nanostructured MoS2 cluster can be tuned from 2.48 to 1.58 and 1.61 eV, by the formation of heterostructures with silver and gold metal nanoclusters, respectively. This band gap is ideal for various applications ranging from flexible nanoelectronics to nanophotonics applications. Furthermore, the adsorption of H2 molecules on both nano-heterostructures is investigated, and the computed binding energies are found to be within the desirable range. The reported theoretical results provide inspiration for engineering various optoelectronic applications for nanostructured MoS2-based heterostructures.

2D Nanomaterials for Effective Energy Scavenging

The development of a nation is deeply related to its energy consumption. 2D nanomaterials have become a spotlight for energy harvesting applications from the small-scale of low-power electronics to a large-scale for industry-level applications, such as self-powered sensor devices, environmental monitoring, and large-scale power generation. Scientists from around the world are working to utilize their engrossing properties to overcome the challenges in material selection and fabrication technologies for compact energy scavenging devices to replace batteries and traditional power sources. In this review, the variety of techniques for scavenging energies from sustainable sources such as solar, air, waste heat, and surrounding mechanical forces are discussed that exploit the fascinating properties of 2D nanomaterials. In addition, practical applications of these fabricated power generating devices and their performance as an alternative to conventional power supplies are discussed with the future pertinence to solve the energy problems in various fields and applications.

Structural, Optical and Electrical Properties of Al+MoO3 and Au+MoO3 Thin Films Prepared by Magnetron Codeposition

Structural, optical and electrical properties of Al+MoO₃ and Au+MoO₃ thin films prepared by simultaneous magnetron sputtering deposition were investigated. The influence of MoO₃ sputtering power on the Al and Au nanoparticle formation and spatial distribution was explored. We demonstrated the formation of spatially arranged Au nanoparticles in the MoO₃ matrix, while Al incorporates in the MoO₃ matrix without nanoparticle formation. The dependence of the Au nanoparticle size and arrangement on the MoO₃ sputtering power was established. The Al-based films show a decrease of overall absorption with an Al content increase, while the Au-based films have the opposite trend. The transport properties of the investigated films also are completely different. The resistivity of the Al-based films increases with the Al content, while it decreases with the Au content increase. The reason is a different transport mechanism that occurs in the films due to their different structural properties. The choice of the incorporated material (Al or Au) and its volume percentage in the MoO₃ matrix enables the design of materials with desirable optical and electrical characteristics for a variety of applications.

Self-Anti-Stacking 2D Metal Phosphide Loop-Sheet Heterostructures by Edge-Topological Regulation for Highly Efficient Water Oxidation

2D metal phosphide loop-sheet heterostructures are controllably synthesized by edge-topological regulation, where Ni₂ P nanosheets are edge-confined by the N-doped carbon loop, containing ultrafine NiFeP nanocrystals (denoted as NiFeP@NC/Ni₂ P). This loop-sheet feature with lifted-edges prevents the stacking of nanosheets and induces accessible open channels for catalytic site exposure and gas bubble release. Importantly, these NiFeP@NC/Ni₂ P hybrids exhibit a remarkable oxygen evolution activity with an overpotential of 223 mV at 20 mA cm^-2 and a Tafel slope of 46.1 mV dec^-1 , constituting the record-high performance among reported metal phosphide electrocatalysts. The NiFeP@NC/Ni₂ P hybrids are also employed as both anode and cathode to achieve an alkaline electrolyzer for overall water splitting, delivering a current density of 10 mA cm^-2 with a voltage of 1.57 V, comparable to that of the commercial Pt/C||RuO₂ couple (1.56 V). Moreover, a photovoltaic-electrolysis coupling system can as well be effectively established for robust overall water splitting. Evidently, this ingenious protocol would expand the toolbox for designing efficient 2D nanomaterials for practical applications.

Recent Trends in Photoacoustic Imaging Techniques for 2D Nanomaterial-Based Phototherapy

A variety of 2D materials have been developed for therapeutic biomedical studies. Because of their excellent physicochemical properties, 2D materials can be used as carriers for delivering therapeutic agents into a lesion, leading to phototherapy. Various optical imaging techniques have been used for the monitoring of the treatment process. Among these, photoacoustic imaging has unique advantages including relatively deep imaging depth and large field of view with high spatial resolution. In this review article, we summarize the types of photoacoustic imaging systems used for phototherapy monitoring, then we explore contrast-enhanced photoacoustic images using 2D materials. Finally, photoacoustic image-guided phototherapies are discussed. We conclude that 2D material-based phototherapy can be efficiently monitored by photoacoustic imaging techniques.

Monolayer Amorphous Carbon-Bridged Nanosheet Mesocrystal: Facile Preparation, Morphosynthetic Transformation, and Energy Storage Applications

Self-assembly of nanoscale building units into mesoscopically ordered superstructures opens the possibility for tailored applications. Nonetheless, the realization of precise controllability related specifically to the atomic scale has been challenging. Here, first, we explore the key role of a molecular surfactant in adjusting the growth kinetics of two-dimensional (2D) layered SnS₂. Experimentally, we show that high pressure both enhances the adsorption energy of the surfactant sodium dodecylbenzene sulfonate (SDBS) on the SnS₂(001) surface at the initial nucleation stage and induces the subsequent oriented attachment (OA) growth of 2D crystallites with monolayer thickness, leading to the formation of a monolayer amorphous carbon-bridged nanosheet mesocrystal. It is notable that such a nanosheet-coalesced mesocrystal is metastable with a flowerlike morphology and can be turned into a single crystal via crystallographic fusion. Subsequently, direct encapsulation of the mesocrystal via FeCl₃-induced pyrrole monomer self-polymerization generates conformal polypyrrole (PPy) coating, and carbonization of the resulting nanocomposites generates Fe-N-S-co-doped carbons that are embedded with well-dispersed SnS/FeCl₃ quantum sheets; this process skillfully integrated structural phase transformation, pyrolysis graphitization, and self-doping. Interestingly, such an integrated design not only guarantees the flowerlike morphology of the final nanohybrids but also, more importantly, allows the thickness of petalous carbon and the size of the nanoconfined particles to be controlled. Benefiting from the unique structural features, the resultant nanohybrids exhibited the brilliant electrochemical performance while simultaneously acting as a reliable platform for exploring the structure-performance correlation of a Li-ion battery (LIB).

Two-Dimensional Nanomaterials With Enzyme-Like Properties for Biomedical Applications

Recently, remarkable progress has been made in nanozyme research due to the rapid development of nanomaterials. Two-dimensional nanomaterials such as metal nanosheets, graphene-based materials, transition metal oxides/dichalcogenides, etc., provide enhanced physical and chemical functionality owing to their ultrathin structures, high surface-to-volume ratios, and surface charges. They have also been found to have high catalytic activities in terms of natural enzymes such as peroxidase, oxidase, catalase, and superoxide dismutase. This review provides an overview of the recent progress of nanozymes based on two-dimensional nanomaterials, with an emphasis on their synthetic strategies, hybridization, catalytic properties, and biomedical applications. Finally, the future challenges and prospects for this research are discussed.

Structural Engineering and Coupling of Two-Dimensional Transition Metal Compounds for Micro-Supercapacitor Electrodes

The development of portable, wearable, and miniaturized integrated electronics has significantly promoted the immense desire for planar micro-supercapacitors (MSCs) among the extremely competitive energy storage devices. However, their energy density is still insufficient owing to the low electrochemical performance of conventional electrode materials. Compared with their bulk counterparts, the large specific surface area and fast ion transport with efficient intercalation of two-dimensional (2D) transition metal compounds have spurred the research platforms for their exploitation in the creation of high-performance MSCs. This Outlook presents a systematic summary of cutting-edge research on atomically thin, layered structures of transition metal dichalcogenides, MXenes, and transition metal oxides/hydroxides. Special emphasis is given to the rapid and durable storage of ions, benefiting from the low ion diffusion barriers of host interlayer spaces. Moreover, various strategies have been described to circumvent the structural damage due to the volume change and simultaneously evincing remarkable electronic properties.

Nanocomposite Membranes for Liquid and Gas Separations from the Perspective of Nanostructure Dimensions

One of the critical aspects in the design of nanocomposite membrane is the selection of a well-matched pair of nanomaterials and a polymer matrix that suits their intended application. By making use of the fascinating flexibility of nanoscale materials, the functionalities of the resultant nanocomposite membranes can be tailored. The unique features demonstrated by nanomaterials are closely related to their dimensions, hence a greater attention is deserved for this critical aspect. Recognizing the impressive research efforts devoted to fine-tuning the nanocomposite membranes for a broad range of applications including gas and liquid separation, this review intends to discuss the selection criteria of nanostructured materials from the perspective of their dimensions for the production of high-performing nanocomposite membranes. Based on their dimension classifications, an overview of the characteristics of nanomaterials used for the development of nanocomposite membranes is presented. The advantages and roles of these nanomaterials in advancing the performance of the resultant nanocomposite membranes for gas and liquid separation are reviewed. By highlighting the importance of dimensions of nanomaterials that account for their intriguing structural and physical properties, the potential of these nanomaterials in the development of nanocomposite membranes can be fully harnessed.

Recent advancement in biomedical applications on the surface of two-dimensional materials: from biosensing to tissue engineering

As biosensors and biomedical devices have become increasingly important to everyday diagnostics and monitoring, there are tremendous, and constant efforts towards developing and improving the reliability and versatility of such technology. As they offer high surface area-to-volume ratios and a diverse range of properties, from electronic to optical, two dimensional (2D) materials have proven to be very promising candidates for biological applications and technologies. Due to the dimensionality, 2D materials facilitate many interfacial phenomena that have shown to significantly improve the performance of biosensors, while recent advances in synthesis techniques and surface engineering methods also enable the realization of future biomedical devices. This short review aims to highlight the influence of 2D material surfaces and the properties that arise due to their 2D structure. Using recent (within the last few years) examples of biosensors and biomedical applications, we emphasize the important role of 2D materials in advancing developments and research for biosensing and healthcare.

Nanoscale covalent organic frameworks as theranostic platforms for oncotherapy: synthesis, functionalization, and applications

Cancer nanomedicine is one of the most promising domains that has emerged in the continuing search for cancer diagnosis and treatment. The rapid development of nanomaterials and nanotechnology provide a vast array of materials for use in cancer nanomedicine. Among the various nanomaterials, covalent organic frameworks (COFs) are becoming an attractive class of upstarts owing to their high crystallinity, structural regularity, inherent porosity, extensive functionality, design flexibility, and good biocompatibility. In this comprehensive review, recent developments and key achievements of COFs are provided, including their structural design, synthesis methods, nanocrystallization, and functionalization strategies. Subsequently, a systematic overview of the potential oncotherapy applications achieved till date in the fast-growing field of COFs is provided with the aim to inspire further contributions and developments to this nascent but promising field. Finally, development opportunities, critical challenges, and some personal perspectives for COF-based cancer therapeutics are presented.

Electrode Materials for Supercapacitors: A Review of Recent Advances

The advanced electrochemical properties, such as high energy density, fast charge–discharge rates, excellent cyclic stability, and specific capacitance, make supercapacitor a fascinating electronic device. During recent decades, a significant amount of research has been dedicated to enhancing the electrochemical performance of the supercapacitors through the development of novel electrode materials. In addition to highlighting the charge storage mechanism of the three main categories of supercapacitors, including the electric double-layer capacitors (EDLCs), pseudocapacitors, and the hybrid supercapacitors, this review describes the insights of the recent electrode materials (including, carbon-based materials, metal oxide/hydroxide-based materials, and conducting polymer-based materials, 2D materials). The nanocomposites offer larger SSA, shorter ion/electron diffusion paths, thus improving the specific capacitance of supercapacitors (SCs). Besides, the incorporation of the redox-active small molecules and bio-derived functional groups displayed a significant effect on the electrochemical properties of electrode materials. These advanced properties provide a vast range of potential for the electrode materials to be utilized in different applications such as in wearable/portable/electronic devices such as all-solid-state supercapacitors, transparent/flexible supercapacitors, and asymmetric hybrid supercapacitors.

A hierarchical porous P-doped carbon electrode through hydrothermal carbonization of pomelo valves for high-performance supercapacitors

Porous carbon materials are synthesized from pomelo valves by the hydrothermal activation of H3PO4 followed by simple carbonization. The as-synthesized hierarchically porous carbon electrode exhibits a high specific capacitance of 966.4 F g-1 at 1 A g-1 and an ultra-high stability of 95.6% even after 10 000 cycles. Moreover, the supercapacitor also demonstrates a maximum energy of 36.39 W h kg-1 and a maximum power of 33.33 kW kg-1 with an energy retention of 25.56 W h kg-1, which paves the way for the development of high-performance, green supercapacitors for advanced energy storage systems.

Research progress of TiO2 photocathodic protection to metals in marine environment

Corrosion protection has become an important issue as the amount of infrastructure construction in marine environment increased. Photocathodic protection is a promising method to reduce the corrosion of metals, and titanium dioxide (TiO₂) is the most widely used photoanode. This review summarizes the progress in TiO₂ photogenerated protection in recent years. Different types of semiconductors, including sulfides, metals, metal oxides, polymers, and other materials, are used to design and modify TiO₂. The strategy to dramatically improve the efficiency of photoactivity is proposed, and the mechanism is investigated in detail. Characterization methods are also introduced, including morphology testing, light absorption, photoelectrochemistry, and protected metal observation. This review aims to provide a comprehensive overview of TiO₂ development and guide photocathodic protection.

Molecular Adsorption of NH3 and NO2 on Zr and Hf Dichalcogenides (S, Se, Te) Monolayers: A Density Functional Theory Study

Due to their atomic thicknesses and semiconducting properties, two-dimensional transition metal dichalcogenides (TMDCs) are gaining increasing research interest. Among them, Hf- and Zr-based TMDCs demonstrate the unique advantage that their oxides (HfO₂ and ZrO₂) are excellent dielectric materials. One possible method to precisely tune the material properties of two-dimensional atomically thin nanomaterials is to adsorb molecules on their surfaces as non-bonded dopants. In the present work, the molecular adsorption of NO₂ and NH₃ on the two-dimensional trigonal prismatic (1H) and octahedral (1T) phases of Hf and Zr dichalcogenides (S, Se, Te) is studied using dispersion-corrected periodic density functional theory (DFT) calculations. The adsorption configuration, energy, and charge-transfer properties during molecular adsorption are investigated. In addition, the effects of the molecular dopants (NH₃ and NO₂) on the electronic structure of the materials are studied. It was observed that the adsorbed NH₃ donates electrons to the conduction band of the Hf (Zr) dichalcogenides, while NO₂ receives electrons from the valance band. Furthermore, the NO₂ dopant affects than NH₃ significantly. The resulting band structure of the molecularly doped Zr and Hf dichalcogenides are modulated by the molecular adsorbates. This study explores, not only the properties of the two-dimensional 1H and 1T phases of Hf and Zr dichalcogenides (S, Se, Te), but also tunes their electronic properties by adsorbing non-bonded dopants.

Hybridized 2D Nanomaterials Toward Highly Efficient Photocatalysis for Degrading Pollutants: Current Status and Future Perspectives

Organic pollutants including industrial dyes and chemicals and agricultural waste have become a major environmental issue in recent years. As an alternative to simple adsorption, photocatalytic decontamination is an efficient and energy-saving technology to eliminate these pollutants from water environment, utilizing the energy of external light, and unique function of photocatalysts. Having a large specific surface area, numerous active sites, and varied band structures, 2D nanosheets have exhibited promising applications as an efficient photocatalyst for degrading organic pollutants, particularly hybridization with other functional components. The novel hybridization of 2D nanomaterials with various functional species is summarized systematically with emphasis on their enhanced photocatalytic activities and outstanding performances in environmental remediation. First, the mechanism of photocatalytic degradation is given for discussing the advantages/shortcomings of regular 2D materials and identifying the importance of constructing hybrid 2D photocatalysts. An overview of several types of intensively investigated 2D nanomaterials (i.e., graphene, g-C₃ N₄ , MoS₂ , WO₃ , Bi₂ O₃ , and BiOX) is then given to indicate their hybridized methodologies, synergistic effect, and improved applications in decontamination of organic dyes and other pollutants. Finally, future research directions are rationally suggested based on the current challenges.

Facile Preparation of MnO2 Quantum Dots with Enhanced Fluorescence via Microenvironment Engineering with the Assistance of Some Reductive Biomolecules

MnO₂ nanomaterials have aroused widespread attention because of their nanozyme activity, redox properties, good biocompatibility, and therapy-related activities. However, not many reports on self-luminescent MnO₂ materials have been concerned to date, which greatly hampered their further development in various fields. In this paper, luminescent MnO₂ quantum dots (MnO₂ QDs) have been first prepared via a facile one-step ultrasonic method. With the assistance of bovine serum albumin (BSA) or cysteine (Cys), the synthesized MnO₂ QDs (BSA-MnO₂ QDs or Cys-MnO₂ QDs) display strongly enhanced fluorescence (FL). The prepared BSA-MnO₂ QDs with a particle size of about 1 to 2 nm show the maximum excitation and emission peaks at 320 and 410 nm with excellent salt stability, anti-photobleaching ability, and time stability. It is confirmed that BSA plays a dual function as the exfoliating agent to promote the exfoliation of bulk MnO₂ nanosheets and as the capping agent to provide a friendly microenvironment for MnO₂ QDs. Ag ions can destroy the microenvironment of BSA-MnO₂ QDs owing to the in situ formation of Ag nanoparticles (Ag NPs) mediated by BSA on the surface of the QDs. Then, these Ag NPs can quench the FL intensity of the QDs by fluorescence resonance energy transfer. However, the FL strength of the BSA-MnO₂ QDs is recovered after adding H₂O₂ and NaHS since they may react with Ag NPs to produce Ag⁺ and Ag₂S, which further confirmed the role of BSA. This work not only opens up a facile and universal avenue to synthesize luminescent MnO₂ QDs with enhanced FL but also provides a possible sensing platform through tuning the microenvironment of the MnO₂ QDs. The MnO₂ QDs with outstanding performance may show great potential as fluorescent probes in the fields of biological imaging, optical sensing, drug delivery, and therapy.