Enhanced Moisture Stability by Butyldimethylsulfonium Cation in Perovskite Solar Cells

Multifunctional sulfonium-based treatment for perovskite solar cells with less than 1% efficiency loss over 4,500-h operational stability tests

The stabilization of grain boundaries and surfaces of the perovskite layer is critical to extend the durability of perovskite solar cells. Here we introduced a sulfonium-based molecule, dimethylphenethylsulfonium iodide (DMPESI), for the post-deposition treatment of formamidinium lead iodide perovskite films. The treated films show improved stability upon light soaking and remains in the black α phase after two years ageing under ambient condition without encapsulation. The DMPESI-treated perovskite solar cells show less than 1% performance loss after more than 4,500 h at maximum power point tracking, yielding a theoretical T80 of over nine years under continuous 1-sun illumination. The solar cells also display less than 5% power conversion efficiency drops under various ageing conditions, including 100 thermal cycles between 25 °C and 85 °C and an 1,050-h damp heat test.

Overcoming C60-induced interfacial recombination in inverted perovskite solar cells by electron-transporting carborane

Inverted perovskite solar cells still suffer from significant non-radiative recombination losses at the perovskite surface and across the perovskite/C₆₀ interface, limiting the future development of perovskite-based single- and multi-junction photovoltaics. Therefore, more effective inter- or transport layers are urgently required. To tackle these recombination losses, we introduce ortho-carborane as an interlayer material that has a spherical molecular structure and a three-dimensional aromaticity. Based on a variety of experimental techniques, we show that ortho-carborane decorated with phenylamino groups effectively passivates the perovskite surface and essentially eliminates the non-radiative recombination loss across the perovskite/C₆₀ interface with high thermal stability. We further demonstrate the potential of carborane as an electron transport material, facilitating electron extraction while blocking holes from the interface. The resulting inverted perovskite solar cells deliver a power conversion efficiency of over 23% with a low non-radiative voltage loss of 110 mV, and retain >97% of the initial efficiency after 400 h of maximum power point tracking. Overall, the designed carborane based interlayer simultaneously enables passivation, electron-transport and hole-blocking and paves the way toward more efficient and stable perovskite solar cells.

Stabilization of Perovskite Solar Cells: Recent Developments and Future Perspectives

Exceptional power conversion efficiency (PCE) of 25.7% in perovskite solar cells (PSCs) has been achieved, which is comparable with their traditional rivals (Si-based solar cells). However, commercialization-worthy efficiency and long-term stability remain a challenge. In this regard, there are increasing studies focusing on the interface engineering in PSC devices to overcome their poor technical readiness. Herein, the roles of electrode materials and interfaces in PSCs are discussed in terms of their PCEs and perovskite stability. All the current knowledge on the factors responsible for the rapid intrinsic and external degradation of PSCs is presented. Then, the roles of carbonaceous materials as substitutes for noble metals are focused on, along with the recent research progress in carbon-based PSCs. Furthermore, a sub-category of PSCs, that is, flexible PSCs, is considered as a type of exceptional power source due to their high power-to-weight ratios and figures of merit for next-generation wearable electronics. Last, the future perspectives and directions for research in PSCs are discussed, with an emphasis on their commercialization.

Surface-Anchored Acetylcholine Regulates Band-Edge States and Suppresses Ion Migration in a 21%-Efficient Quadruple-Cation Perovskite Solar Cell

Although incorporating multiple halogen (bromine) anions and alkali (rubidium) cations can improve the open-circuit voltage (V_oc ) of perovskite solar cells (PSCs), severe voltage loss and poor stability have remained pivotal limitations to their further commercialization. In this study, acetylcholine (ACh⁺ ) is anchored to the surface of a quadruple-cation perovskite to provide additional electron states near the valence band maximum of the perovskite surface, thereby enhancing the band alignment and minimizing the V_oc loss significantly. Moreover, the quaternary ammonium and carbonyl units of ACh⁺ passivate the antisite and vacancy defects of the organic/inorganic hybrid perovskite. Because of strong interactions between ACh⁺ and the perovskite, the formation of lead clusters and the migration of halogen anions in the perovskite film are suppressed. As a result, the device prepared with ACh⁺ post-treatment delivers a power conversion efficiency (PCE) (21.56%) and a value of V_oc (1.21 V) that are much higher than those of the pristine device, along with a twofold decrease in the hysteresis index. After storage for 720 h in humid air, the device subjected to ACh⁺ treatment maintained 70% of its initial PCE. Thus, post-treatment with ACh⁺ appears to be a useful strategy for preparing efficient and stable PSCs.

Chemical Polishing of Perovskite Surface Enhances Photovoltaic Performances

The benefits of excess PbI₂ on perovskite crystal nucleation and growth are countered by the photoinstability of interfacial PbI₂ in perovskite solar cells (PSCs). Here we report a simple chemical polishing strategy to rip PbI₂ crystals off the perovskite surface to decouple these two opposing effects. The chemical polishing results in a favorable perovskite surface exhibiting enhanced luminescence, prolonged carrier lifetimes, suppressed ion migration, and better energy level alignment. These desired benefits translate into increased photovoltages and fill factors, leading to high-performance mesostructured formamidinium lead iodide-based PSCs with a champion efficiency of 24.50%. As the interfacial ion migration paths and photodegradation triggers, dominated by PbI₂ crystals, were eliminated, the hysteresis of the PSCs was suppressed and the device stability under illumination or humidity stress was significantly improved. Moreover, this new surface polishing strategy can be universally applicable to other typical perovskite compositions.

Introducing Ion Migration and Light-Induced Secondary Ion Redistribution for Phase-Stable and High-Efficiency Inorganic Perovskite Solar Cells

Inorganic halide perovskites have been demonstrated as a promising alternative for light absorption because of their improved thermal stability compared with organic-inorganic halide perovskites. However, low power conversion efficiency and phase instability are major hindrances to their application. Here, a straightforward approach, by adding a layer of CsBr on the top of CsPbI₃, is reported for high-efficiency and phase-stable CsPbI₃-based solar cells. Characterizations demonstrate that the bromide ion can migrate from the surface into the bulk of CsPbI₃, mitigating the nonuniform depth distribution of iodide in the CsPbI₃ absorber and passivating the bulk defects. Impressively, the light illumination can induce secondary-ion redistribution, which is identified as a crucial process to further enhance the carrier extraction efficiency, strengthen the lattice stability, and improve the film homogenization. Accordingly, a high efficiency of 17% is obtained for the CsPbI₃-based solar cell. Moreover, the unencapsulated device exhibits remarkable phase stability, maintaining 93% of its initial efficiency under room temperature after being stored in the nitrogen glovebox for over 5000 h.

Surface chelation of cesium halide perovskite by dithiocarbamate for efficient and stable solar cells

Surface engineering has been shown critical for the success of perovskite solar cells by passivating the surface enriched defects and mobile species. The discovery of surface modulators with superior interaction strength to perovskite is of paramount importance since they can retain reliable passivation under various environments. Here, we report a chelation strategy for surface engineering of CsPbI2Br perovskite, in which dithiocarbamate molecules can be coordinate to surface Pb sites via strong bidentate chelating bonding. Such chelated CsPbI2Br perovskite can realize excellent passivation of surface under-coordinated defects, reaching a champion power conversion efficiency of 17.03% and an open-circuit voltage of 1.37 V of CsPbI2Br solar cells. More importantly, our chelation strategy enabled excellent device stability by maintaining 98% of their initial efficiency for over 1400 h in ambient condition. Our findings provide scientific insights on the surface engineering of perovskite that can facilitate the further development and application of perovskite optoelectronics.

Novel amphiphilic corannulene additive for moisture-resistant perovskite solar cells

Novel triethyleneglycol-functionalized corannulene sulfone (Cor-TEG) with by-design functionalities leads to favourable perovskite morphology, enhanced carrier extraction and protection against moisture.