Enhanced Solar Photothermal Catalysis over Solution Plasma Activated TiO2

Non-Photochemical Origin of Selectivity Difference between Light and Dark Catalytic Conditions

The interest in introducing light into heterogeneous catalysis is driven not only by the urgent need of replacing fossil energy but also by the promise of controlling product selectivity by light. The product selectivity differences observed in recent studies between light and dark reactions are often attributed to photochemical effects. Here, we report the discovery of a non-photochemical origin of selectivity difference, at essentially the same CO2 conversion rate, between photothermal and thermal CO2 hydrogenation reactions over a Ru/TiO2-x catalyst. While the presence of the photochemical effect from ultraviolet light is confirmed, it merely enhances the catalytic activity. Systematic investigation reveals that the gradual formation of an adsorbate-mediated strong metal-support interaction under catalytic conditions is responsible for the variation in the catalytic selectivity. We demonstrate that differences in product selectivity under light/dark reactions do not necessarily originate from photochemical effects. Our study refines the basis for determining photochemical effects and highlights the importance of excluding non-photochemical effects in mechanistic studies of light-controlled product selectivity.

Guiding the Driving Factors on Plasma Super-Photothermal S-Scheme Core-Shell Nanoreactor to Enhance Photothermal Catalytic H2 Evolution and Selective CO2 Reduction

Light-induced heat has a non-negligible role in photocatalytic reactions. However, it is still challenging to design highly efficient catalysts that can make use of light and thermal energy synergistically. Herein, the study proposes a plasma super-photothermal S-scheme heterojunction core-shell nanoreactor based on manipulation of the driving factors, which consists of α-Fe2 O3 encapsulated by g-C3 N4 modified with gold quantum dots. α-Fe2 O3 can promote carrier spatial separation while also acting as a thermal core to radiate heat to the shell, while Au quantum dots transfer energetic electrons and heat to g-C3 N4 via surface plasmon resonance. Consequently, the catalytic activity of Au/α-Fe2 O3 @g-C3 N4 is significantly improved by internal and external double hot spots, and it shows an H2 evolution rate of 5762.35 µmol h-1 g-1 , and the selectivity of CO2 conversion to CH4 is 91.2%. This work provides an effective strategy to design new plasma photothermal catalysts for the solar-to-fuel transition.

Role of the In-Situ-Formed Surface (Pt-S-O)-Ti Active Structure in SO2-Promoted C3H8 Combustion over a Pt/TiO2 Catalyst

Typically, SO2 unavoidably deactivates catalysts in most heterogeneous catalytic oxidations. However, for Pt-based catalysts, SO2 exhibits an extraordinary boosting effect in propane catalytic oxidation, but the promotive mechanism remains contentious. In this study, an in situ-formed tactful (Pt-S-O)-Ti structure was concluded to be a key factor for Pt/TiO2 catalysts with a substantial SO2 tolerance ability. The experiments and theoretical calculations confirm that the high degree of hybridization and orbital coupling between Pt 5d and S 3p orbitals enable more charge transfer from Pt to S species, thus forming the (Pt-S-O)-Ti structure with the oxygen atom dissociated from the chemisorbed O2 adsorbed on oxygen vacancies. The active oxygen atom in the (Pt-S-O)-Ti active structure is a robust site for C3H8 adsorption, leading to a better C3H8 combustion performance. This work can provide insights into the rational design of chemical bonds for high SO2 tolerance catalysts, thereby improving economic and environmental benefits.

Utilizing Cymbopogon Proximus Grass Extract for Green Synthesis of Zinc Oxide Nanorod Needles in Dye Degradation Studies

This study successfully synthesized zinc oxide nanorod needles (ZnO-NRNs) using an environmentally friendly method employing Cymbopogon Proximus extract. The resulting ZnO-NRNs exhibited exceptional physicochemical and structural properties, confirmed through various characterization techniques, including UV-Vis spectrophotometry, dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). The analysis revealed a hexagonal wurtzite structure with high crystallinity, a 3.6 eV band gap, and a notably blue-shifted absorption band. ZnO-NRNs showed impressive photocatalytic activity, degrading Rhodamine B dye by 97% under UV and visible sunlight, highlighting their photostability and reusability. This green synthesis process offers cost effectiveness and environmental sustainability for practical applications.

Activation of 2D titanate nanosheet photocatalysts by nitrogen doping and solution plasma processing

Novel two-dimensional (2D) oxides are of great interest for photocatalysis because of their superlative physical features, namely, large surface areas, short charge diffusion pathways, high crystallinity and easy surface modification. However, most 2D oxides suffer from weak visible light absorption and severe photogenerated carrier recombination. Nitrogen doping can successfully narrow the bandgap of 2D oxides but can hardly improve the charge separation. In this work, we pre-dope nitrogen into 2D titanate nanosheets (HTiO), followed by surface processing with solution plasma. By dual modification of nitrogen doping and solution plasma processing (SPP), the modified 2D titanate nanosheets (N-HTiO-SPP) display broad absorption extending to the visible light region and the healing of oxygen vacancies brought about by nitrogen doping. Compared with HTiO and nitrogen doped titanate (N-HTiO), a higher removal rate and mineralization rate towards the photocatalytic degradation of acetaldehyde were achieved over N-HTiO-SPP under solar light. This work provides a powerful way to activate 2D wide bandgap semiconductors for enhanced photocatalytic activity.

Integrated Photochromic-Photothermal Processes for Catalytic Plastic Upcycling

Incorporating high-energy ultraviolet (UV) photons into photothermal catalytic processes may enable photothermal-photochemical synergistic catalysis, which represents a transformative technology for waste plastic recycling. The major challenge is avoiding side reactions and by-products caused by these energetic photons. Here, we break through the limitation of the existing photothermal conversion mechanism and propose a photochromic-photothermal catalytic system based on polyol-ligated TiO2 nanocrystals. Upon UV or sunlight irradiation, the chemically bonded polyols can rapidly capture holes generated by TiO2 , enabling photogenerated electrons to reduce Ti4+ to Ti3+ and produce oxygen vacancies. The resulting abundant defect energy levels boost sunlight-to-heat conversion efficiency, and simultaneously the oxygen vacancies facilitate polyester glycolysis by activating the nucleophilic addition-elimination process. As a result, compared to commercial TiO2 (P25), we achieve 6-fold and 12.2-fold performance enhancements under thermal and photothermal conditions, respectively, while maintaining high selectivity to high-valued monomers. This paradigm-shift strategy directs energetic UV photons for activating catalysts and avoids their interaction with reactants, opening the possibility of substantially elevating the efficiency of more solar-driven catalysis.

Defective TiO2 Nanotube Arrays for Efficient Photoelectrochemical Degradation of Organic Pollutants

Oxygen vacancies (OVs) are one of the most critical factors that enhance the electrical and catalytic characteristics of metal oxide-based photoelectrodes. In this work, a simple procedure was applied to prepare reduced TiO₂ nanotube arrays (NTAs) (TiO_2-x) via a one-step reduction method using NaBH₄. A series of characterization techniques were used to study the structural, optical, and electronic properties of TiO_2-x NTAs. X-ray photoelectron spectroscopy confirmed the presence of defects in TiO_2-x NTAs. Photoacoustic measurements were used to estimate the electron-trap density in the NTAs. Photoelectrochemical studies show that the photocurrent density of TiO_2-x NTAs was nearly 3 times higher than that of pristine TiO₂. It was found that increasing OVs in TiO₂ affects the surface recombination centers, enhances electrical conductivity, and improves charge transport. For the first time, a TiO_2-x photoanode was used in the photoelectrochemical (PEC) degradation of a textile dye (basic blue 41, B41) and ibuprofen (IBF) pharmaceutical using in situ generated reactive chlorine species (RCS). Liquid chromatography coupled with mass spectrometry was used to study the mechanisms for the degradation of B41 and IBF. Phytotoxicity tests of B41 and IBF solutions were performed using Lepidium sativum L. to evaluate the potential acute toxicity before and after the PEC treatment. The present work provides efficient PEC degradation of the B41 dye and IBF in the presence of RCS without generating harmful products.

Super-Photothermal Effect-Mediated Fast Reaction Kinetic in S-Scheme Organic/Inorganic Heterojunction Hollow Spheres Toward Optimized Photocatalytic Performance

Using full solar spectrum for energy conversion and environmental remediation is a major challenge, and solar-driven photothermal chemistry is a promising route to achieve this goal. Herein, this work reports a photothermal nano-constrained reactor based on hollow structured g-C₃ N₄ @ZnIn₂ S₄ core-shell S-scheme heterojunction, where the synergistic effect of super-photothermal effect and S-scheme heterostructure significantly improve the photocatalytic performance of g-C₃ N₄ . The formation mechanism of g-C₃ N₄ @ZnIn₂ S₄ is predicted in advance by theoretical calculations and advanced techniques, and the super-photothermal effect of g-C₃ N₄ @ZnIn₂ S₄ and its contribution to the near-field chemical reaction is confirmed by numerical simulations and infrared thermography. Consequently, the photocatalytic degradation rate of g-C₃ N₄ @ZnIn₂ S₄ for tetracycline hydrochloride is 99.3%, and the photocatalytic hydrogen production is up to 4075.65 µmol h^-1 g^-1 , which are 6.94 and 30.87 times those of pure g-C₃ N₄ , respectively. The combination of S-scheme heterojunction and thermal synergism provides a promising insight for the design of an efficient photocatalytic reaction platform.

Interfacial molecular regulation of TiO2 for enhanced and stable cocatalyst-free photocatalytic hydrogen production

On the basis of the inherent property limitations of commercial P25-TiO₂, many surface interface modification methods have attracted substantial attention for further improving the photocatalytic properties. However, current strategies for designing and modifying efficient photocatalysts (which exhibit complicated manufacturing processes and harsh conditions) are not efficient for production that is low cost, is nontoxic, and exhibits good stability; and therefore restrict practical applications. Herein, a facile and reliable method is reported for in situ amine-containing silane coupling agent functionalization of commercial P25-TiO₂ by covalent surface modification for constructing a highly efficient photocatalyst. As a consequence, a high efficiency of H₂ evolution was achieved for TiO₂-SDA with 0.95 mmol h^-1 g^-1 (AQE ∼45.6 % at 365 nm) under solar light irradiation without a co-catalyst. The amination modification broadens the light absorption range of the photocatalyst, inhibits the binding of photogenerated carriers, and improves the photocatalytic efficiency; which was verified by photochemical properties and DFT theoretical calculations. This covalent modification method ensures the stability of the photocatalytic reaction. This work provides an approach for molecularly modified photocatalysts to improve photocatalytic performance by covalently modifying small molecules containing amine groups on the photocatalyst surface.

Topologically Porous Heterostructures for Photo/Photothermal Catalysis of Clean Energy Conversion

As a straightforward way to fix solar energy, photo/photothermal catalysis with semiconductor provides a promising way to settle the energy shortage and environmental crisis in many fields, especially in clean energy conversion. Topologically porous heterostructures (TPHs), featured with well-defined pores and mainly composed by the derivatives of some precursors with specific morphology, are a major part of hierarchical materials in photo/photothermal catalysis and provide a versatile platform to construct efficient photocatalysts for their enhanced light absorption, accelerated charges transfer, improved stability, and promoted mass transportation. Therefore, a comprehensive and timely review on the advantages and recent applications of the TPHs is of great importance to forecast the potential applications and research trend in the future. This review initially demonstrates the advantages of TPHs in photo/photothermal catalysis. Then the universal classifications and design strategies of TPHs are emphasized. Besides, the applications and mechanisms of photo/photothermal catalysis in hydrogen evolution from water splitting and CO_x hydrogenation over TPHs are carefully reviewed and highlighted. Finally, the challenges and perspectives of TPHs in photo/photothermal catalysis are also critically discussed.

Ethanol Solution Plasma Loads Carbon Dots onto 2D HNb3O8 for Enhanced Photocatalysis

Layered metal oxoacids hold potential as photocatalysts due to their facile exfoliation to two-dimensional (2D) nanosheets with a large surface area and a short migration distance for photoexcited charge carriers. However, the utilization of electrons in photocatalytic processes is restricted by the competitive trapping of electrons by metal ions. In this work, we attempt to improve the utilization of photogenerated electrons over exfoliated HNb₃O₈ nanosheets by solution plasma activation. On dispersing exfoliated HNb₃O₈ nanosheets in ethanol solution plasma, the defects in HNb₃O₈ can be engineered, and carbon dots (CDs) can be anchored on the surface of HNb₃O₈ nanosheets in situ. In comparison with pristine HNb₃O₈ nanosheets, the rate of photocatalytic hydrogen evolution can be increased by 317.7 times over the HNb₃O₈/C heterojunction, and the apparent quantum efficiency of hydrogen production can be as high as 5.05%. The reason for the high photocatalytic performance is explored by the comparison of activation between plasma-in-ethanol and plasma-in-water, which reveals that CD anchoring and defect engineering indeed promote charge separation and hence lead to enhanced photocatalytic activity. This work provides an alternative approach to synthesize CDs and activate 2D-layered compounds with MO₆ (M = Nb, Ti, and W) octahedral building blocks in the host layer for enhanced photocatalytic evolution of hydrogen.

Effect of Vacuum-Sealed Annealing and Ice-Water Quenching on the Structure and Photocatalytic Acetone Oxidations of Nano-TiO2 Materials

In the current research, P25 TiO₂ materials sealed in quartz vacuum tubes were subject to annealing and ice-water post-quenching, with the effects on TiO₂ structures, morphology, and photocatalytic activity being studied. It is shown that the vacuum-sealed annealing can lead to a decrease in the crystallinity and temperature of anatase-to-rutile phase transition. A disorder layer is formed over TiO₂ nanoparticles, and the TiO₂ lattices are distorted between the disorder layer and crystalline core. The ice-water post-quenching almost has no effect on the crystalline structure and morphology of TiO₂. It can be seen that the vacuum-sealed annealing can generate more defects, and the electrons are mainly localized at lattice Ti sites, as well as the percentage of bulk oxygen defects is also increased. Although further ice-water post-quenching can introduce more defects in TiO₂, it does not affect the electron localization and defect distribution. The vacuum-sealed annealing process can increase the photocatalytic acetone oxidations of the anatase phase TiO₂ to some extent, possibly because of the defect generation and Ti³⁺ site formation; the further ice-water quenching leads to a decrease in the photocatalytic activity because more defects are introduced.

Design of Bronze-Rich Dual-Phasic TiO2 Embedded Amorphous Carbon Nanocomposites Derived from Ti-Metal-Organic Frameworks for Improved Lithium-Ion Storage

Dual-phasic (DP)-TiO₂ -based composites are considered attractive anode materials for high lithium-ion storage because of the synergetic contribution from dual-phases in lithium-ion storage. However, a comprehensive investigation on more efficient architectures and platforms is necessary to develop lithium-storage devices with high-rate capability and long-term stability. Herein, for the first time, a rationally designed bronze-rich DP-TiO₂ -embedded amorphous carbon nanoarchitecture, denoted as DP-TiO₂ @C, from sacrificial Ti-metal-organic frameworks (Ti-MOFs) via a two-step pyrolysis process is proposed. The bronze/anatase DP-TiO₂ @C nanocomposites are successfully synthesized using a unique pyrolysis process, which decomposes individually the metal clusters and organic linkers of Ti-MOFs. DP-TiO₂ @C exhibits a significantly high density and even distribution of nanoparticles (<5 nm), enabling the formation of numerous heterointerfaces. Remarkably, the bronze-rich DP-TiO₂ @C shows high specific capacities of 638 and 194 mAh g^-1 at current densities of 0.1 and 5 A g^-1 , respectively, owing to the contribution of the synergetic interfacial structure. In addition, reversible specific capacities are observed at a high rate (5 A g^-1 ) during 6000 cycles. Thus, this study presents a new approach for the synthesis of DP-TiO₂ @C nanocomposites from a sacrificial Ti-MOF and provides insights into the efficient control of the volume ratio in DP-TiO₂ anode architecture.

Insights into Photothermally Enhanced Photocatalytic U(VI) Extraction by a Step-Scheme Heterojunction

In this work, a CdS/BiVO₄ step-scheme (S-scheme) heterojunction with self-photothermally enhanced photocatalytic effect was synthesized and applied for efficient U(VI) photoextraction. Characterizations such as transient absorption spectroscopy and Tafel test together confirmed the formation of S-scheme heterojunctions, which allows CdS/BiVO₄ to avoid photocorrosion while retaining the strong reducing capacity of CdS and the oxidizing capacity of BiVO₄. Experimental results such as radical quenching experiments and electron spin resonance show that U(VI) is rapidly oxidized by photoholes/^•OH to insoluble UO₂(OH)₂ after being reduced to U(IV) by photoelectrons/^•O₂⁻, which precisely avoids the depletion of electron sacrificial agents. The rapid recombination of electron-hole pairs triggered by the S-scheme heterojunction is found to release large amounts of heat and accelerate the photocatalysis. This work offers a new enhanced strategy for photocatalytic uranium extraction and presents a direction for the design and development of new photocatalysts.

From Materials to Devices: Rationally Designing Solar Steam System for Advanced Applications

Solar-driven water vaporization for freshwater production attracts significant interest due to its potential for solving global water scarcity problems. In this review, the recent development of management strategies via diverse rational designs in terms of light, thermal, water, and anti-salt fouling for enhancement of overall vaporization efficiency, is summarized. For device design, a host-guest concept is raised for clearly elaborating the detailed function and interaction between the solar-thermal material and the substrates. In addition, the rising technologies derived from solar vaporization, such as energy generation, photocatalysis, dehumidification, salt harvesting, sterilization, and biofuel production, are also highlighted. This review provides a new horizon toward the development of solar technologies and practical applications.

Recent Advancements in Photocatalysis Coupling by External Physical Fields

Photocatalysis is one of the most promising green technologies to utilize solar energy for clean energy achievement and environmental governance, such as artificial photosynthesis, water splitting, pollutants degradation, etc. Despite decades of research, the performance of photocatalysis still falls far short of the requirement of 5% solar energy conversion efficiency. Combining photocatalysis with the other physical fields has been proven to be an efficient way around this barrier which can improve the performance of photocatalysis remarkably. This review will focus on the recent advances in photocatalysis coupling by external physical fields, including Thermal-coupled photocatalysis (TCP), Mechanical-coupled photocatalysis (MCP), and Electromagnetism-coupled photocatalysis (ECP). In this paper, coupling mechanisms, materials, and applications of external physical fields are reviewed. Specifically, the promotive effect on photocatalytic activity by the external fields is highlighted. This review will provide a detailed and specific reference for photocatalysis coupling by external physical fields in a deep-going way.

Synthesis, modification and application of titanium dioxide nanoparticles: a review

Titanium dioxide (TiO₂) has been heavily investigated owing to its low cost, benign nature and strong photocatalytic ability. Thus, TiO₂ has broad applications including photocatalysts, Li-ion batteries, solar cells, medical research and so on. However, the performance of TiO₂ is not satisfactory due to many factors such as the broad band gap (3.01 to 3.2 eV) and fast recombination of electron-hole pairs (10^-12 to 10^-11 s). Plenty of work has been undertaken to improve the properties, such as structural and dopant modifications, which broaden the applications of TiO₂. This review mainly discusses the aspects of TiO₂-modified nanoparticles including synthetic methods, modifications and applications.

Thermo-photo catalysis: a whole greater than the sum of its parts

Thermo-photo catalysis, which is the catalysis with the participation of both thermal and photo energies, not only reduces the large energy consumption of thermal catalysis but also addresses the low efficiency of photocatalysis. As a whole greater than the sum of its parts, thermo-photo catalysis has been proven as an effective and promising technology to drive chemical reactions. In this review, we first clarify the definition (beyond photo-thermal catalysis and plasmonic catalysis), classification, and principles of thermo-photo catalysis and then reveal its superiority over individual thermal catalysis and photocatalysis. After elucidating the design principles and strategies toward highly efficient thermo-photo catalytic systems, an ample discussion on the synergetic effects of thermal and photo energies is provided from two perspectives, namely, the promotion of photocatalysis by thermal energy and the promotion of thermal catalysis by photo energy. Subsequently, state-of-the-art techniques applied to explore thermo-photo catalytic mechanisms are reviewed, followed by a summary on the broad applications of thermo-photo catalysis and its energy management toward industrialization. In the end, current challenges and potential research directions related to thermo-photo catalysis are outlined.

Photothermal Chemistry Based on Solar Energy: From Synergistic Effects to Practical Applications

With the development of society, energy shortage and environmental problems have become more and more outstanding. Solar energy is a clean and sustainable energy resource, potentially driving energy conversion and environmental remediation reactions. Thus, solar-driven chemistry is an attractive way to solve the two problems. Photothermal chemistry (PTC) is developed to achieve full-spectral utilization of the solar radiation and drive chemical reactions more efficiently under relatively mild conditions. In this review, the mechanisms of PTC are summarized from the aspects of thermal and non-thermal effects, and then the interaction and synergy between these two effects are sorted out. In this paper, distinguishing and quantifying these two effects is discussed to understand PTC processes better and to design PTC catalysts more methodically. However, PTC is still a little far away from practical. Herein, several key points, which must be considered when pushing ahead with the engineering application of PTC, are proposed, along with some workable suggestions on the practical application. This review provides a unique perspective on PTC, focusing on the synergistic effects and pointing out a possible direction for practical application.

Insights into Photothermally Enhanced Photocatalytic U(VI) Extraction by a Step-Scheme Heterojunction

In this work, a CdS/BiVO 4 step-scheme (S-scheme) heterojunction with self-photothermally enhanced photocatalytic effect was synthesized and applied for efficient U(VI) photoextraction. Characterizations such as transient absorption spectroscopy and Tafel test together confirmed the formation of S-scheme heterojunctions, which allows CdS/BiVO 4 to avoid photocorrosion while retaining the strong reducing capacity of CdS and the oxidizing capacity of BiVO 4 . Experimental results such as radical quenching experiments and electron spin resonance show that U(VI) is rapidly oxidized by photoholes/ • OH to insoluble UO 2 (OH) 2 after being reduced to U(IV) by photoelectrons/ • O 2 - , which precisely avoids the depletion of electron sacrificial agents. The rapid recombination of electron-hole pairs triggered by the S-scheme heterojunction is found to release large amounts of heat and accelerate the photocatalysis. This work offers a new enhanced strategy for photocatalytic uranium extraction and presents a direction for the design and development of new photocatalysts.

Microfluidic Ratiometric Photoelectrochemical Biosensor Using a Magnetic Field on a Photochromic Composite Platform: A Proof-of-Concept Study for Magnetic-Photoelectrochemical Bioanalysis

Integrating a microfluidic sensor with a ratiometric photoelectrochemical (PEC) strategy to build a bioanalysis device for actual sample testing is often limited to large-volume space-resolution equipment and wavelength-dependent or potential-dependent paired photoactive materials. This work reports a microfluidic ratiometric magnetic-photoelectrochemical (M-PEC) biosensor on the photochromic composite platform to solve the above problems. In particular, as a proof-of-concept study, the platform Bi₂WO_6-x/amorphous BiOCl nanosheets/Bi₂S₃ (p-BWO-s) mediated by photochromic color centers and the magnetic photoactive secondary antibody marker ZnFe₂O₄@Ag₂O are integrated on the microfluidic biosensor. By enhancement of the photochromic color centers, p-BWO-s outputs a considerable photocurrent signal. Meanwhile, the photoactivity of the secondary antibody marker can be changed with a magnetic field; thus, different photocurrent signals can be obtained to realize ratiometric detection. The quenching photocurrent signal without the magnetic field and the difference photocurrent signal under the magnetic field are quantitatively related to the target concentration, which unfolds a novel general strategy for bioanalysis. Different from traditional ratiometric PEC biosensors, this work characterizes the first ratiometric PEC biosensor based on an external magnetic field. Generally speaking, combined with different biorecognition cases, this scheme with good expansibility brings a unique new perspective.

State-of-the-art progress in tracking plasmon-mediated photoredox catalysis

Metal nanocrystals (NCs), particularly for plasmonic metal NCs with specific morphology and size, can strongly interact with ultraviolet-visible or even near-infrared photons to generate energetic charge carriers, localized heating, and electric field enhancement. These unique properties offer a promising opportunity for maneuvering solar-to-chemical energy conversion through different mechanisms. As distinct from previous works, in this review, recent advances of various characterization techniques in probing and monitoring the photophysical/photochemical processes, as well as the reaction mechanisms of plasmon-mediated photoredox catalysis are thoroughly summarized. Understanding how to distinguish and track these reaction mechanisms would furnish basic guidelines to design next-generation photocatalysts for plasmon-enhanced catalysis.

Insight on Solution Plasma in Aqueous Solution and Their Application in Modification of Chitin and Chitosan

Sustainability and environmental concerns have persuaded researchers to explore renewable materials, such as nature-derived polysaccharides, and add value by changing chemical structures with the aim to possess specific properties, like biological properties. Meanwhile, finding methods and strategies that can lower hazardous chemicals, simplify production steps, reduce time consumption, and acquire high-purified products is an important task that requires attention. To break through these issues, electrical discharging in aqueous solutions at atmospheric pressure and room temperature, referred to as the "solution plasma process", has been introduced as a novel process for modification of nature-derived polysaccharides like chitin and chitosan. This review reveals insight into the electrical discharge in aqueous solutions and scientific progress on their application in a modification of chitin and chitosan, including degradation and deacetylation. The influencing parameters in the plasma process are intensively explained in order to provide a guideline for the modification of not only chitin and chitosan but also other nature-derived polysaccharides, aiming to address economic aspects and environmental concerns.

Molecular-Level Control of the Intersheet Distance and Electronic Coupling between 2D Semiconducting and Metallic Nanosheets: Establishing Design Rules for High-Performance Hybrid Photocatalysts

Hybridization with conductive nanospecies has attracted intense research interest as a general effective means to improve the photocatalytic functionalities of nanostructured materials. To establish universal design rules for high-performance hybrid photocatalysts, correlations between versatile roles of conductive species and interfacial interaction between hybridized species are systematically investigated through fine-control of intersheet distance between photocatalytically active TiO2 and metallic reduced graphene oxide (rGO)/RuO2 nanosheets. Molecular-level tailoring of intersheet distance and electronic coupling between 2D nanosheets can be successfully achieved by restacking of colloidal nanosheet mixture with variable-sized organic intercalants. While the shortest intersheet distance between restacked TiO2 and rGO nanosheets leads to the highest visible-light-driven photocatalytic activity, the best UV-vis photocatalyst performance occurs for moderate intersheet spacing. These results highlight the greater sensitivity of photoinduced electronic excitation to the intersheet distance than that of interfacial charge transfer. The rGO nanosheet can function as effective charge transport pathway and cocatalyst within ≈1.7 nm distance from the semiconducting nanosheet, and as efficient stabilizer for hybridized photocatalyst within ≈1.8 nm. The present study underscores that the intercalative restacking of colloidal nanosheet mixture with intercalants enables molecular-level control of distance between 2D inorganic/graphene nanosheets, which provides a rational design strategy for high-performance hybrid photocatalysts.

Photothermal synergic catalytic degradation of the gaseous organic pollutant isopropanol in oxygen vacancies utilizing ZnFe2O4

ZnFe2O4 is an environmentally friendly semiconductor material which has potential applications in catalytic organic pollutant degradation. Here, we demonstrate the synthesis of ZnFe2O4 and its photothermal catalytic application. The obtained ZnFe2O4 prepared by using the sol-gel method has a large specific surface area which reaches 56.4 m2/g. Electron paramagnetic resonance, X-ray photoelectron spectra, and photoabsorption results indicate that ZnFe2O4 has plentiful oxygen vacancies. When evaluated by the degradation of the gaseous organic pollutant isopropanol, oxygen-vacancy-rich ZnFe2O4 presents a high and stable thermal catalytic performance, while driven by high-intensity light. In addition, a distinct improvement is observed. Moreover, a synergic photothermal catalytic mechanism of isopropanol degradation on ZnFe2O4 is proposed.

Niobium and Titanium Carbides (MXenes) as Superior Photothermal Supports for CO2 Photocatalysis

The conversion of CO₂ into fuels and feedstock chemicals via photothermal catalysis holds promise for efficient solar energy utilization to tackle the global energy shortage and climate change. Despite recent advances, it is of emerging interest to explore promising materials with excellent photothermal properties to boost the performance of photothermal CO₂ catalysis. Here, we report the discovery of MXene materials as superior photothermal supports for metal nanoparticles. As a proof-of-concept study, we demonstrate that Nb₂C and Ti₃C₂, two typical MXene materials, can enhance the photothermal effect and thus boost the photothermal catalytic activity of Ni nanoparticles. A record CO₂ conversion rate of 8.50 mol·g_Ni^-1·h^-1 is achieved for Nb₂C-nanosheet-supported Ni nanoparticles under intense illumination. Our study bridges the gap between photothermal MXene materials and photothermal CO₂ catalysis toward more efficient solar-to-chemical energy conversions and stimulates the interest in MXene-supported metal nanoparticles for other heterogeneous catalytic reactions, particularly driven by sunlight.

Preparation of hydrogen, fluorine and chlorine doped and co-doped titanium dioxide photocatalysts: a theoretical and experimental approach

Titanium dioxide (TiO₂) has a strong photocatalytic activity in the ultra-violet part of the spectrum combined with excellent chemical stability and abundance. However, its photocatalytic efficiency is prohibited by limited absorption within the visible range derived from its wide band gap value and the presence of charge trapping states located at the band edges, which act as electron–hole recombination centers. Herein, we modify the band gap and improve the optical properties of TiO₂ via co-doping with hydrogen and halogen. The present density functional theory (DFT) calculations indicate that hydrogen is incorporated in interstitial sites while fluorine and chlorine can be inserted both as interstitial and oxygen substitutional defects. To investigate the synergy of dopants in TiO₂ experimental characterization techniques such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray and ultra-violet photoelectron spectroscopy (XPS/UPS), UV–Vis absorption and scanning electron microscopy (SEM) measurements, have been conducted. The observations suggest that the oxide’s band gap is reduced upon halogen doping, particularly for chlorine, making this material promising for energy harvesting devices. The studies on hydrogen production ability of these materials support the enhanced hydrogen production rates for chlorine doped (Cl:TiO₂) and hydrogenated (H:TiO₂) oxides compared to the pristine TiO₂ reference.