Reversible Deactivation Radical Polymerization: From Polymer Network Synthesis to 3D Printing

Deciphering the importance of nanoencapsulation to improve the availability of bioactive molecules in food sources to the human body

Various bodily functions are maintained, and health benefits are provided by food-derived bioactive components. Fruits and vegetables contain numerous beneficial components, including vitamins, minerals, antioxidants, enzymes, and phytonutrients. However, the body's ability to absorb these substances at a given rate and degree frequently limits their bioavailability. If food-derived bio actives are used as therapeutic or dietary interventions, this limitation can result in low efficacy and suboptimal results. Recently, nanotechnology has been a useful method for increasing the bioavailability of bioactive compounds produced from food. Active ingredients can be delivered and absorbed more efficiently with the help of nanotechnology. By altering their size or surface properties, bioactive components can be made more soluble, permeable, and bioavailable through nanotechnology. The present review will provide an overview of the various bioactive components, the application of nanotechnology to improve the availability of bioactive molecules to humans and animals, and the challenges and safety concerns associated with nanotechnology in the production of food-derived bioactive molecules.

Three-Dimensional Printing of Hydrogel Blend Tissue Engineering Scaffolds with In Situ Delivery of Anticancer Drug for Treating Melanoma Resection-Induced Tissue Defects

Surgery is considered the gold standard for treating melanoma, but the high recurrence rate after surgery still remains as a major challenge. Therefore, using doxorubicin (DOX) as a model drug, this study investigated the 3D printing of anticancer drug-loaded hydrogel blend scaffolds for inhibiting post-operation melanoma recurrence and for promoting tissue regeneration. Three-dimensional printing could successfully produce methacrylate-modified chitosan (CSMA) and methylcellulose (MC) hydrogel blend scaffolds. Polymer blend inks exhibited satisfactory printability, and the printed porous scaffolds showed good biocompatibility and mechanical properties. Three-dimensionally printed DOX-loaded hydrogel scaffolds displayed controlled drug release, which may effectively prevent/impede tumor recurrence after surgery. Furthermore, combining 3D printing and bioprinting, DOX-loaded and rat bone marrow mesenchymal stem cell (rBMSC)-laden scaffolds were created for assessing local DOX delivery on healthy tissues. Within the 14-day culture period, rBMSCs encapsulated in multilayered scaffolds that were incorporated with DOX displayed rejuvenated cell viability. The 3D printed and bioprinted dual purpose hydrogel scaffolds have the promise of combating tumor recurrence and providing structural support for tissue regeneration.

Tuning the Mechanical Properties of 3D-Printed Objects by Mixing Chain Transfer Agents in Norrish Type I Photoinitiated RAFT Polymerization

Photoinduced 3D printing via photocontrolled reversible-deactivation radical polymerization (photoRDRP) techniques has emerged as a robust technique for creating polymeric materials. However, methods for precisely adjusting the mechanical properties of these materials remain limited. In this study, we present a facile approach for adjusting the mechanical properties of 3D-printed objects by adjusting the polymer dispersity within a Norrish type I photoinitiated reversible addition-fragmentation chain transfer (NTI-RAFT) polymerization-based 3D printing process. We investigated the effects of varying the concentrations and molar ratios of trithiocarbonate (BTPA) and xanthate (EXEP) on the mechanical properties of the printed materials. Our findings demonstrate that increased concentrations of RAFT agents or higher proportions of the more active BTPA lead to a decrease in Young's modulus and glass transition temperatures, along with an increase in elongation at break, which can be attributed to the enhanced homogeneity of the polymer network. Using a commercial LCD printer, the NTI-RAFT-based 3D printing system effectively produced materials with tailored mechanical properties, highlighting its potential for practical applications.

Strategies and Mechanisms of First-Row Transition Metal-Regulated Radical C-H Functionalization

Radical C-H functionalization represents a useful means of streamlining synthetic routes by avoiding substrate preactivation and allowing access to target molecules in fewer steps. The first-row transition metals (Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) are Earth-abundant and can be employed to regulate radical C-H functionalization. The use of such metals is desirable because of the diverse interaction modes between first-row transition metal complexes and radical species including radical addition to the metal center, radical addition to the ligand of metal complexes, radical substitution of the metal complexes, single-electron transfer between radicals and metal complexes, hydrogen atom transfer between radicals and metal complexes, and noncovalent interaction between the radicals and metal complexes. Such interactions could improve the reactivity, diversity, and selectivity of radical transformations to allow for more challenging radical C-H functionalization reactions. This review examines the achievements in this promising area over the past decade, with a focus on the state-of-the-art while also discussing existing limitations and the enormous potential of high-value radical C-H functionalization regulated by these metals. The aim is to provide the reader with a detailed account of the strategies and mechanisms associated with such functionalization.

A Minimalist Method for Fully Oxygen-Tolerant RAFT Polymerization through Sulfur-Centered Trithiocarbonate Radical Initiation

In recent years, the fully oxygen-tolerant reversible deactivation radical polymerization (RDRP) has become a highly researched area. In this contribution, a new and minimalist method is successfully employed to accomplish fully oxygen-tolerant reversible addition-fragmentation chain transfer (RAFT) polymerization using bis(trithiocarbonate) disulfides (BisTTC) as an iniferter agent, where the released sulfur-centered trithiocarbonate (TTC) radical can initiate monomer. Furthermore, polymerization kinetics revealed the typical "living" features of this polymerization system. More importantly, by high-throughput screening, it is found that dodecyl-substituted TTC is responsible for the fully oxygen-tolerant RAFT polymerization though trithiocarbonate radical initiation and R radical deoxygenation. It is believed that trithiocarbonate radical initiation strategy provides a powerful and minimalist tool for fully oxygen-tolerant RDRPs.

Programming Mechanical Properties through Encoded Network Topologies

Polymer networks remain an essential class of soft materials. Despite their use in everyday materials, connecting the molecular structure of the network to its macroscopic properties remains an active area of research. Much current research is enabled by advances in modern polymer chemistry providing an unprecedented level of control over macromolecular structure. At the same time, renewed interest in self-healing, dynamic, and/or adaptable materials continues to drive substantial interest in polymer network design. As part of a special issue focused on research performed in the Polymer Science and Engineering Department at the University of Massachusetts, Amherst, this review highlights connections between macromolecular structure of networks and observed mechanical properties as investigated by the Tew research group.

Tuning the Mechanical Properties of 3D-printed Objects by Mixing Chain Transfer Agents in Radical Promoted Cationic RAFT Polymerization

The utilization of (cationic) reversible addition-fragmentation chain transfer (RAFT) polymerization in photoinduced three-dimensional (3D) printing has emerged as a robust technique for fabricating a variety of stimuli-responsive materials. However, methods for precisely adjusting the mechanical properties of these materials remain limited, thereby constraining their broader applicability. In this study, a facile way is introduced to modulate the mechanical properties of 3D printed objects by mixing two chain transfer agents (CTAs) within a radical-promoted cationic RAFT (RPC-RAFT) polymerization-based 3D printing process. Through systematic investigations employing tensile testing and dynamic mechanical analysis (DMA), the influence of CTA concentration and molar ratio between two CTAs on the mechanical behavior of the printed objects are explored. These findings demonstrate that higher concentrations of CTAs or a greater molar ratio of the more active CTA within the mixed CTAs result in decreased Young's modulus and glass transition temperatures of the printed objects. Moreover, the tensile failure strain increased with the increasing CTA content, i.e., the samples became more ductile. This methodology broadens the toolbox available for tailoring the mechanical properties of 3D printed materials.

Polymeric Nanoparticles for Drug Delivery

The recent emergence of nanomedicine has revolutionized the therapeutic landscape and necessitated the creation of more sophisticated drug delivery systems. Polymeric nanoparticles sit at the forefront of numerous promising drug delivery designs, due to their unmatched control over physiochemical properties such as size, shape, architecture, charge, and surface functionality. Furthermore, polymeric nanoparticles have the ability to navigate various biological barriers to precisely target specific sites within the body, encapsulate a diverse range of therapeutic cargo and efficiently release this cargo in response to internal and external stimuli. However, despite these remarkable advantages, the presence of polymeric nanoparticles in wider clinical application is minimal. This review will provide a comprehensive understanding of polymeric nanoparticles as drug delivery vehicles. The biological barriers affecting drug delivery will be outlined first, followed by a comprehensive description of the various nanoparticle designs and preparation methods, beginning with the polymers on which they are based. The review will meticulously explore the current performance of polymeric nanoparticles against a myriad of diseases including cancer, viral and bacterial infections, before finally evaluating the advantages and crucial challenges that will determine their wider clinical potential in the decades to come.

Reversible Thiyl Radical Addition-Fragmentation Chain Transfer Polymerization

Developing reversible-deactivation radical polymerization (RDRP) methods that could directly control the thiyl radical propagation is highly desirable yet remains challenging in modern polymer chemistry. Here, we reported the first reversible thiyl radical addition-fragmentation chain transfer (SRAFT) polymerization strategy, which utilizes allyl sulfides as chain transfer agents for reversibly deactivating the propagating thiyl radicals, thus allowing us to directly control a challenging thiyl radical chain polymerization to afford polymers with well-defined architectures. A linear dependence of molecular weight on conversion, high chain-end fidelity, and efficient chain extension proved good controllability of the polymerization. In addition, density functional theory calculations provided insight into the reversible deactivation ability of allyl sulfides. The SRAFT strategy developed in this work represents a promising platform for discovering new controlled polymerizations based on thiyl radical chemistry.

Tuning the Mechanical Properties of 3D-printed Objects by the RAFT Process: From Chain-Growth to Step-Growth

Photoinduced 3D printing based on the reversible addition-fragmentation chain transfer (RAFT) process has emerged as a robust method for creating diverse functional materials. However, achieving precise control over the mechanical properties of these printed objects remains a critical challenge for practical application. Here, we demonstrated a RAFT step-growth polymerization of a bifunctional xanthate and bifunctional vinyl acetate. Additionally, we demonstrated photoinduced 3D printing through RAFT step-growth polymerization with a tetrafunctional xanthate and a bifunctional vinyl acetate. By adjusting the molar ratio of the components in the printing resins, we finely tuned the polymerization mechanism from step-growth to chain-growth. This adjustment resulted in a remarkable range of tunable Young's moduli, ranging from 7.6 MPa to 997.1 MPa. Moreover, post-functionalization and polymer welding of the printed objects with varying mechanical properties opens up a promising way to produce tailor-made materials with specific and tunable properties.

Dual Ratiometric Fluorescence Monitoring of Mechanical Polymer Chain Stretching and Subsequent Strain-Induced Crystallization

Tracking the behavior of mechanochromic molecules provides valuable insights into force transmission and associated microstructural changes in soft materials under load. Herein, we report a dual ratiometric fluorescence (FL) analysis for monitoring both mechanical polymer chain stretching and strain-induced crystallization (SIC) of polymers. SIC has recently attracted renewed attention as an effective mechanism for improving the mechanical properties of polymers. A polyurethane (PU) film incorporating a trace of a dual-emissive flapping force probe (N-FLAP, 0.008 wt %) exhibited a blue-to-green FL spectral change in a low-stress region (<20 MPa), resulting from conformational planarization of the probe in mechanically stretched polymer chains. More importantly, at higher probe concentrations (∼0.65 wt %), the PU film showed a second spectral change from green to yellow during the SIC growth (20-65 MPa) due to self-absorption of scattered FL in a short wavelength region. The reversibility of these spectral changes was demonstrated by load-unload cycles. With these results in hand, the degrees of the polymer chain stretching and the SIC were quantitatively mapped and monitored by dual ratiometric imaging based on different FL ratios (I525/I470 and I525/I600). Simultaneous analysis of these two mappings revealed a spatiotemporal gap in the distribution of the polymer chain stretching and the SIC. The combinational use of the dual-emissive force probe and the ratiometric FL imaging is a universal approach for the development of soft matter physics.

Fluorescence-readout as a powerful macromolecular characterisation tool

The last few decades have witnessed significant progress in synthetic macromolecular chemistry, which can provide access to diverse macromolecules with varying structural complexities, topology and functionalities, bringing us closer to the aim of controlling soft matter material properties with molecular precision. To reach this goal, the development of advanced analytical techniques, allowing for micro-, molecular level and real-time investigation, is essential. Due to their appealing features, including high sensitivity, large contrast, fast and real-time response, as well as non-invasive characteristics, fluorescence-based techniques have emerged as a powerful tool for macromolecular characterisation to provide detailed information and give new and deep insights beyond those offered by commonly applied analytical methods. Herein, we critically examine how fluorescence phenomena, principles and techniques can be effectively exploited to characterise macromolecules and soft matter materials and to further unravel their constitution, by highlighting representative examples of recent advances across major areas of polymer and materials science, ranging from polymer molecular weight and conversion, architecture, conformation to polymer self-assembly to surfaces, gels and 3D printing. Finally, we discuss the opportunities for fluorescence-readout to further advance the development of macromolecules, leading to the design of polymers and soft matter materials with pre-determined and adaptable properties.

Red-light-mediated Barton decarboxylation reaction and one-pot wavelength-selective transformations

In organic chemistry, selecting mild conditions for transformations and saving energy are increasingly important for achieving sustainable development goals. Herein, we describe a red-light-mediated Barton decarboxylation using readily available red-light-emitting diodes as the energy source and zinc tetraphenylporphyrin as the catalyst, avoiding explosive or hazardous reagents or external heating. Mechanistic studies suggest that the reaction probably proceeds via Dexter energy transfer between the activated catalyst and the Barton ester. Furthermore, a one-pot wavelength-selective reaction within the visible light range is developed in combination with a blue-light-mediated photoredox reaction, demonstrating the compatibility of two photochemical transformations based on mechanistic differences. This one-pot process expands the limits of the decarboxylative Giese reaction beyond polarity matching.

Nanotoxicity of multifunctional stoichiometric cobalt oxide nanoparticles (SCoONPs) with repercussions toward apoptosis, necrosis, and cancer necrosis factor (TNF-α) at nano-biointerfaces

Introduction

Apoptosis, necrosis, and cancer necrosis factor (TNF-a) are all impacted by the nanotoxicity of multifunctional stoichiometric cobalt oxide nanoparticles (SCoONPs) at nano-biointerfaces. The creation of multi-functional nanoparticles has had a considerable impact on the transport of drugs and genes, nanotheranostics (in-vivo imaging, concurrent diagnostics), interventions for external healing, the creation of nano-bio interfaces, and the instigation of desired changes in nanotherapeutics.

Objectives

The quantitative structure-activity relationships, chemical transformations, biological interactions as well as toxicological analyses are considered as main objectives. Discrete dimensions of SCoNPs-cell interaction interfaces, their characteristic physical features (size, shape, shell structure, and surface chemistry), impact on cell proliferation and differentiation are the key factors responsible for nanotoxicity.

Methods

The development of multi-functional nanoparticles has been significant in drug/gene delivery, nanotheranostics (in-vivo imaging, coinciding diagnostics), and external healing interventions, designing a nano-bio interface, as well as inciting desired alterations in nanotherapeutics. Every so often, the cellular uptake of multi-functional cobalt [Co, CoO, Co2(CO)8 and Co3O4] nanoparticles (SCoONPs) influences cellular mechanics and initiates numerous repercussions (oxidative stress, DNA damage, cytogenotoxicity, and chromosomal damage) in pathways, including the generation of dysregulating factors involved in biochemical transformations.

Results

The concerns and influences of multifunctional SCoNPs on different cell mechanisms (mitochondria impermeability, hydrolysis of ATP, the concentration of Ca2+, impaired calcium clearance, defective autophagy, apoptosis, and necrosis), and interlinked properties (adhesion, motility, and internalization dynamics, role in toxicity, surface hydrophilic and hydrophobicity, biokinetics and biomimetic behaviors of biochemical reactions) have also been summarized. SCoONPs have received a lot of interest among the nanocarriers family because of its advantageous qualities such as biodegradability, biocompatibility, nontoxicity, and nonimmunogenicity.

Conclusion

Various applications, such as bio-imaging, cell labeling, gene delivery, enhanced chemical stability, and increased biocompatibility, concerning apoptosis, necrosis, and nano-bio interfaces, along with suitable examples. In this analysis, the multi-functional cobalt [Co, CoO, Co2(CO)8 and Co3O4] nanoparticles (SCoNPs) intricacies (cytogenotoxicity, clastogenicity, and immunomodulatory), nanotoxicity, and associated repercussions have been highlighted and explained.

Emulsion-Directed Synthesis of Poly-Porphyrin Nanoparticles as Heterogeneous Photocatalysts for PET-RAFT Polymerization

Heterogeneous photocatalysts have attracted extensive attention in photo-induced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization due to their remarkable advantages such as easy preparation, tunable photoelectric properties, and recyclability. In this study, zinc (II) 5,10,15,20-tetrakis(4-aminophenyl)porphyrin (ZnTAPP)-based poly-porphyrin nanoparticles (PTAPP-Zn) are constructed by an emulsion-directed approach. It is investigated as a heterogeneous photocatalyst for PET-RAFT polymerization of various methacrylate monomers under visible light exposure, and the reactions show refined polymerization control with high monomer conversions. Furthermore, it is demonstrated that the PTAPP-Zn nanoparticles with the larger pore size enhance photocatalytic activity in PET-RAFT polymerization. In addition, the capabilities of oxygen tolerance and temporal control are demonstrated and PTAPP-Zn particles can be easily recycled and reused without an obvious decrease in catalytic efficiency.

Multi-Stimuli Responsive Sequence Defined Multi-Arm Star Diblock Copolymers for Controlled Drug Release

Star-shaped polymeric materials provide very high efficiency toward various engineering and biomedical applications. Due to the absence of straightforward and versatile synthetic protocols, the synthesis of sequence-defined star-shaped (co)polymers has remained a major challenge. Here, a facile approach is developed that allows synthesis of a series of unprecedented discrete, multifunctional four-, six-, and eight-arm star-shaped complex macromolecular architectures based on a well-defined triple (thermo/pH/light)-stimuli-responsive poly(N-isopropylacrylamide)-block-poly(methacrylic acid)-umbelliferone (PNIPAM-b-PMAA)n-UMB diblock copolymer, based on temperature responsive PNIPAM segment, pH-responsive PMAA segment, and photoresponsive UMB end groups. Thus, developed star-shaped copolymers self-assemble in water to form spherical nanoaggregates of diameter 90 ± 20 nm, as measured by FESEM. The star-shaped copolymer's response to external stimuli has been assessed against changes in temperature, pH, and light irradiation. The star-shaped copolymer was employed as a nanocarrier for pH responsive release of an anticancer drug, doxorubicin. This study opens up new avenues for efficient star-shaped macromolecular architecture construction for engineering and biomedical applications.

Repeatedly Recyclable 3D Printing Catalyst-Free Dynamic Thermosetting Photopolymers

Photo-curing 3D printing technology has promoted the advanced manufacturing in various fields, but has exacerbated the environmental crisis by the demand for the chemically cross-linked thermosetting photopolymers. Here, the authors report a generic strategy to develop catalyst-free dynamic thermosetting photopolymers, based on photopolymerization and transesterification, that can enable users to realize repeatable 3D printing, providing a practical solution to the environmental challenges. That the β-carbonyl group adjacent to the ester group greatly accelerates the rate of transesterification is demonstrated. The generated resins from the immobilization of the catalyst-free reversible bonds into the photopolymers leads to a dynamic covalently crosslinked network structure upon UV based 3D printing, which exhibit controllable mechanical properties with elastomeric behaviors to thermadapt shape memory polymers. Furthermore, the resulting network can be reverted into an acrylate-functioned photopolymer that is suitable for 3D printing again, presenting an on-demand, repeatedly recyclable thermosetting photopolymer platform for sustainable 3D printing.

Mechanistic aspect for the atom transfer radical polymerization of itaconimide monomers with methyl methacrylate: a computational study

Atom transfer radical polymerization (ATRP) is a versatile & famous technique for the synthesis of well defined molecular architectures. In ATRP, there is a dynamic equilibrium exists between active & dormant species. Therefore, ATRP progress through a sequence of activation & deactivation cycles, ending upon complete monomer consumption & termination reactions are minimized. This paper presents a systematic computational study on kinetics & thermodynamics associates in the ATRP of itaconimide monomers & methyl methacrylate (MMA). For this, the copolymerization system is modeled as a unimer, dimer & trimer of various itaconimides & MMA monomer. The density functional theory with B3LYP functional & 6–31 + G(d)/LanL2DZ basis sets is used in the prediction of geometries & energetics associated with the dissociation of terminal R–X bond present in the unimer, dimer & trimer. The relative equilibrium constant (K ATRP) for the ATRP activation/deactivation steps is calculated from the free energy values associated with dissociation of R–X bond. The relative K ATRP values of dimer & trimer of selected monomers is compared with their respective unimer. From the transition state geometries of the dimeric propagating radical, activation energy is calculated. The gas phase rate coefficients for propagation (k p) (of itaconimides & MMA copolymerization) are calculated using the standard transition state theory. The effect of system parameters such as solvent, temperature & substituent on K ATRP & k p values of dimer is investigated systematically. The change in the initiating system & temperature has significant effect on k p values as compared to solvent & various substituent. The K ATRP values of dimer & trimer dormant species are higher as compared to their respective monomeric species. The neighboring monomer & penultimate monomer plays vital role in kinetics & thermodynamics associated with copolymerization. The obtained initial results show that the mechanism of copolymerization of itaconimide monomers & MMA follows penultimate model.

Gelation in Photoinduced ATRP with Tuned Dispersity of the Primary Chains

We investigated gelation in photoinduced atom transfer radical polymerization (ATRP) as a function of Cu catalyst loading and thus primary chain dispersity. Using parallel polymerizations of methyl acrylate with and without the addition of a divinyl crosslinker (1,6-hexanediol diacrylate), the approximate values of molecular weights and dispersities of the primary chains at incipient gelation were obtained. In accordance with the Flory-Stockmayer theory, experimental gelation occurred at gradually lower conversions when the dispersity of the primary chains increased while maintaining a constant monomer/initiator/crosslinker ratio. Theoretical gel points were then calculated using the measured experimental values of dispersity and initiation efficiency. An empirical modification to the Flory-Stockmayer equation for ATRP was implemented, resulting in more accurate predictions of the gel point. Increasing the dispersity of the primary chains was found not to affect the distance between the theoretical and experimental gel points and hence the extent of intramolecular cyclization. Furthermore, the mechanical properties of the networks, such as equilibrium swelling ratio and shear storage modulus showed little variation with catalyst loading and depended primarily on the crosslinking density.

Fast Living 3D Printing via Free Radical Promoted Cationic RAFT Polymerization

The application of reversible deactivation radical polymerization techniques in 3D printing is emerging as a powerful method to build "living" polymer networks, which can be easily postmodified with various functionalities. However, the building speed of these systems is still limited compared to commercial systems. Herein, a digital light processing (DLP)-based 3D printing system via photoinduced free radical-promoted cationic reversible addition-fragmentation chain transfer polymerization of vinyl ethers, which can build "living" objects by a commercial DLP 3D printer at a relatively fast building speed (12.99 cm h^-1 ), is reported. The polymerization behavior and printing conditions are studied in detail. The livingness of the printed objects is demonstrated by spatially controlled postmodification with a fluorescent monomer.

Kinetics of Polymer Network Formation by Nitroxide-Mediated Radical Copolymerization of Styrene/Divinylbenzene in Supercritical Carbon Dioxide

The kinetics of nitroxide-mediated dispersion copolymerization with crosslinking of styrene (STY) and divinylbenzene (DVB) in supercritical carbon dioxide (scCO2) is addressed experimentally. 2,2,6,6-Tetramethylpiperidinyl-1-oxy (TEMPO) and dibenzoyl peroxide (BPO) were used as nitroxide controller and initiator, respectively. A high-pressure cell with lateral sapphire windows at 120 °C and 207 bar was used to carry out the polymerizations. The nitroxide-mediated homopolymerization (NMP) of STY, as well as the conventional radical copolymerization (FRC) of STY/DVB, at the same conditions were also carried out as reference and for comparison purposes. The effect of nitroxide content on polymerization rate, evolution of molecular weight averages, gel fraction, and swelling index was studied.

Photoinduced Ion-Pair Inner-Sphere Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization

Photoredox-mediated reversible deactivation radical polymerization (RDRP) is a promising method of precise synthesis of polymers with diverse structures and properties. However, its mechanism mainly based on the outer-sphere electron transfer (OSET) leads to stringent requirements for an efficient photocatalyst. In this paper, the zwitterionic organoboranes [L₂B]⁺X^- are prepared and applied in reversible addition-fragmentation chain transfer (RAFT) polymerization with the photoinduced ion-pair inner-sphere electron transfer (IP-ISET) mechanism. The ion-pair electron transfer mechanism and the formation of the radical [L₂B]^• are supported by electron paramagnetic resonance (EPR) radical capture experiments, ¹H/¹¹B NMR spectroscopy, spectroelectrochemical spectroscopy, transient absorption spectroscopy, theoretical calculation, and photoluminescence quenching experiments. Photoluminescence quenching experiments show that when [CTA]/[[L₂B]⁺] ≥ 0.6, it is static quenching because of the in situ formation of [L₂B]⁺[ZCS₂]^-, the real catalytic species. [L₂B]⁺[C₃H₇SCS₂]^- is synthesized, and its photoluminescence lifetime is the same as the lifetime in the static quenching experiment, indicating the formation of [L₂B]⁺[ZCS₂]^- in polymerization and the IP-ISET mechanism. The matrix-assisted laser desorption ionization time-of-flight mass (MALDI-TOF MS) spectra show that the structure of [C₃H₇SCS₂] was incorporated into the polymer, indicating that ion-pair electron transfer occurs in catalytic species. The polymerization shows high catalytic activity at ppb catalyst loading, a wide range of monomers, excellent tolerance in the presence of 5 mol % phenolic inhibitors, and the synthesis of ultrahigh-molecular-weight polymers. This protocol with the IP-ISET mechanism exhibits a value in the development of new organic transformations and polymerization methods.

Novel Formulations Containing Fluorescent Sensors to Improve the Resolution of 3D Prints

Three-dimensional printing in SLA (stereolithography) and DLP (digital light processing) technologies has recently been experiencing a period of extremely rapid development. This is due to the fact that researchers recognise the many advantages of 3D printing, such as the high resolution and speed of the modelling and printing processes. However, there is still a search for new resin formulations dedicated to specific 3D printers allowing for high-resolution prints. Therefore, in the following paper, the effects of dyes such as BODIPY, europium complex, and Coumarin 1 added to light-cured compositions polymerised according to the radical mechanism on the photopolymerisation process speed, polymerisation shrinkage, and the final properties of the printouts were investigated. The kinetics of the photopolymerisation of light-cured materials using real-time FT-IR methods, as well as printouts that tangibly demonstrate the potential application of 3D printing technology in Industry 4.0, were examined. These studies showed that the addition of dyes has an effect on obtaining fluorescent prints with good resolution.

Controllable synthesis and structural design of novel all-organic polymers toward high energy storage dielectrics

As the core unit of energy storage equipment, high voltage pulse capacitor plays an indispensable role in the field of electric power system and electromagnetic energy related equipment. The mostly utilized polymer materials are metallized polymer thin films, which are represented by biaxially oriented polypropylene (BOPP) films, possessing the advantages including low cost, high breakdown strength, excellent processing ability, and self-healing performance. However, the low dielectric constant (εr &lt; 3) of traditional BOPP films makes it impossible to meet the demand for increased high energy density. Controlled/living radical polymerization (CRP) and related techniques have become a powerful approach to tailor the chemical and physical properties of materials and have given rise to great advances in tuning the properties of polymer dielectrics. Although organic-inorganic composite dielectrics have received much attention in previous studies, all-organic polymer dielectrics have been proven to be the most promising choice because of its light weight and easy large-scale continuous processing. In this short review, we begin with some basic theory of polymer dielectrics and some theoretical considerations for the rational design of dielectric polymers with high performance. In the guidance of these theoretical considerations, we review recent progress toward all-organic polymer dielectrics based on two major approaches, one is to control the polymer chain structure, containing microscopic main-chain and side-chain structures, by the method of CRP and the other is macroscopic structure design of all-organic polymer dielectric films. And various chemistry and compositions are discussed within each approach.

Efficacy analysis of new copper complex for visible light (455, 530 nm) radical/cationic photopolymerization: The synergic effects and catalytic cycle

The kinetics and the conversion features of two 3-component systems (A/B/N), based on the proposed new kinetic schemes of Mokbel and Mau et al, in which a visible LED is used to excite a copper complex to its excited triplet state (G*). The coupling of G* with iodonium salt and ethyl 4-(dimethylamino)benzoate (EDB) produces both free radical polymerization (FRP) of acrylates and the free radical promoted cationic polymerization (CP) of epoxides using various new copper complex as the initiator. Higher FRP and CP conversion can be achieved by co-additive of [B] and N, via the dual function of (i) regeneration [A], and (ii) generation of extra radicals. The interpenetrated polymer network (IPN) capable of initiating both FRP and CP in a blend of TMPTA and EPOX. The synergic effects due to CP include: (i) CP can increase viscosity limiting the diffusional oxygen replenishment; (ii) the cation also acts as a diluting agent for the IPN network, and (iii) the exothermic property of the CP. The catalytic cycle, synergic effects, and the oxygen inhibition are theoretically confirmed to support the experimental hypothesis. The measured results of Mokbel and Mau et al are well analyzed and matching the predicted features of our modeling.

Enzyme Catalysis for Reversible Deactivation Radical Polymerization

Enzyme catalysis has been increasingly utilized in reversible deactivation radical polymerization (Enz-RDRP) on account of its mildness, efficiency, and sustainability. In this Minireview we discuss the key roles enzymes play in RDRP, including their ATRPase, initiase, deoxygenation, and photoenzyme activities. We use selected examples to highlight applications of Enz-RDRP in surface brush fabrication, sensing, polymerization-induced self-assembly, and high-throughput synthesis. We also give our reflections on the challenges and future directions of this emerging area.

Bioenhanced Rapid Redox Initiation for RAFT Polymerization in the Air

A well-controlled bioenhanced reversible addition-fragmentation chain transfer (RAFT) in the presence of air is carried out by using glucose oxidase (GOx), glucose, ascorbic acid (Asc acid), and ppm level of hemin. The catalytic concentration of hemin is employed to enhance hydrogen peroxide (H₂ O₂ )/Asc acid redox initiation, achieving rapid RAFT polymerization. Narrow molecular weight distributions and high monomer conversion (Ð as low as 1.09 at >95% conversion) are achieved within tens of minutes. Several kinds of monomers are used to verify the universal implication of the presented method. The influences of the pH and feed ratio of each component on the polymerization rate are assessed. Besides, a polymerization rate regulation is realized by managing Asc acid addition. This work significantly increases the rate of redox-initiated GOx-deoxygen RAFT polymerization by using simple and green reactants, facilitating the application of RAFT polymerization in areas such as biomedical applications.

Ultrafast Visible-Light-Induced ATRP in Aqueous Media with Carbon Quantum Dots as the Catalyst and Its Application for 3D Printing

Photoinduced atom transfer radical polymerization (ATRP) has been proved to be a versatile technique for polymer network formation. However, the slow polymerization rates of typical ATRP limited its application in the field of additive manufacturing (3D printing). In this work, we introduced carbon quantum dots (CQDs) for the first time to the ATRP in aqueous media and developed an ultrafast visible-light-induced polymerization system. After optimization, the polymerization could achieve a high monomer conversion (>90%) within 1 min, and the polydispersity index (PDI) of the polymer was lower than 1.25. This system was then applied as the first example of ATRP for the 3D printing of hydrogel through digital light processing (DLP), and the printed object exhibited good dimensional accuracy. Additionally, the excellent and stable optical properties of CQDs also provided interesting photoluminescence capabilities to the printed objects. We deduce this ATRP mediated 3D printing process would provide a new platform for the preparation of functional and stimuli-responsive hydrogel materials.

Simple Full-Spectrum Heterogeneous Photocatalyst for Photo-induced Atom Transfer Radical Polymerization (ATRP) under UV/vis/NIR and its Application for the Preparation of Dual Mode Curing Injectable Photoluminescence Hydrogel

The utilizing light with broadband range has attracted lots of research interest for the photo induced reversible-deactivation radical polymerization (RDRP). However, it is still a challenge for a single catalyst to simultaneously respond to various lights with highly varied wavelengths. Here, we proposed a simple strategy for the preparation of a heterogeneous photocatalyst suitable for photo induced atom transfer radical polymerization (photoATRP) under full spectrum (from UV/vis light to NIR), by combining pyridine nitrogen doped carbon dots (N-CDs) and upconversion nanoparticles (UCNPs). In the presence of these robust UCNP@SiO₂@N-CDs composite particles, the photoATRP could be carried on under the different irradiations of UV, blue, green, red, white, and 980 nm NIR light, with a low loading of part per million concentrations of the CuBr₂/L catalyst. Moreover, the excellent solvent and aqueous compatibility allow UCNP@SiO₂@N-CDs to be capable for photoATRP in both organic solvents and aqueous media, providing well-defined hydrophobic and hydrophilic polymers with low dispersity and excellent chain-end fidelity. In addition, the photoATRP with 980 nm NIR exhibited excellent penetrations through visible-light-proof barriers. The system could be used for the preparation of an injectable hydrogel that had dual curing and photoluminescence modes. Owing to the "living" characteristics of polymer chains achieved through ATRP, the hydrogel was capable to be easily repaired by using monomer as the binder.

Rational Design of Photocatalysts for Controlled Polymerization: Effect of Structures on Photocatalytic Activities

Over the past decade, the use of photocatalysts (PCs) in controlled polymerization has brought new opportunities in sophisticated macromolecular synthesis. However, the selection of PCs in these systems has been typically based on laborious trial-and-error strategies. To tackle this limitation, computer-guided rational design of PCs based on knowledge of structure-property-performance relationships has emerged. These rational strategies provide rapid and economic methodologies for tuning the performance and functionality of a polymerization system, thus providing further opportunities for polymer science. This review provides an overview of PCs employed in photocontrolled polymerization systems and summarizes their progression from early systems to the current state-of-the-art. Background theories on electronic transitions are also introduced to establish the structure-property-performance relationships from a perspective of quantum chemistry. Typical examples for each type of structure-property relationships are then presented to enlighten future design of PCs for photocontrolled polymerization.

Hydrogel Polyester Scaffolds via Direct-Ink-Writing of Ad Hoc Designed Photocurable Macromonomer

Synthetic, degradable macromonomers have been developed to serve as ink for 3D printing technologies based on direct-ink-writing. The macromonomers are purposely designed to be cross-linkable under the radical mechanism, to impart hydrophilicity to the final material, and to have rheological properties matching the printer's requirements. The suitable viscosity enables the ink to be printed at room temperature, in absence of organic solvents, and to be cross-linked to manufacture soft 3D scaffolds that show no indirect cytotoxicity and have a hydration capacity of up to 100% their mass and a compressive modulus in the range of 0.4-2 MPa.

Wavelength-Resolved PhotoATRP

The careful mapping of photoinduced reversible-deactivation radical polymerizations (RDRP) is a prerequisite for their applications in soft matter materials design. Here, we probe the wavelength-dependent behavior of photochemically induced atom transfer radical polymerization (ATRP) using nanosecond pulsed-laser polymerization (PLP). The photochemical reactivities at identical photon fluxes of methyl acrylate in terms of conversion, number-average molecular weight, and dispersity of the resulting polymers are mapped against the absorption spectrum of the copper(II) catalyst in the range of 305-550 nm. We observe a red shift of the action spectrum relative to the absorption spectrum of the copper(II) catalyst. Both the number-average molecular weight and the dispersity show a wavelength dependence, while the molecular weight and conversion remain linearly correlated. The reported data allow the judicious selection of optimum wavelengths for photoATRP.

A linear-polymer-based lactoferrin-selective recognition element for an ELISA mimic: A proof of concept

The synthesis of polymers with tailored properties for the recognition of macromolecules such as proteins is challenging. In this work, the synthesis of a new polymer format, a linear polymer (LP), as the selective recognition element for the globular protein lactoferrin (LF) is proposed as a proof-of-concept study. For the synthesis, a solid-phase strategy using the reversible deactivation radical polymerisation (RDRP) mechanism is proposed. This approach, which is usually used in molecular imprinting, involves the immobilisation of LF on the surface of a solid support, but, unlike classical imprinting, a cross-linker in the polymerisation mixture is not required. Consequently, the copolymer is soluble and flexible, thus overcoming the drawbacks associated with traditional synthetic polymers for macromolecule imprinting. This new polymer format has great potential for replacing natural antibodies in bioassays such as enzyme-linked immunosorbent assays (ELISA), dot blot, western blot, or pull-down. In our case, the linear polymer was used as a recognition element to replace natural antibodies in a LF-selective ELISA. The responses of the linear polymer between LF concentrations of 0.1 nM and 0.25 μM were studied, and a significant difference was observed between the non-specific signals and the signals measured in the presence of the polymeric material. Further, the response versus log concentration curves were fitted to a logistic equation, allowing estimation of the EC₅₀ value: 11.8 ± 1.4 nM. We also confirmed the selective detection of LF using the competitive inhibition of the selective LF-biotin conjugate (LF-Bi) binding to the plastic receptor (LP) for closely related proteins (e.g. those having similar molecular weights or isoelectric points) such as human lysozyme, trypsin, and albumin, which are present in human body fluids. The system presents a cross-reactivity value or selectivity of 1.95% for lysozyme, 0.028% for trypsin, and 0.016% for albumin. The applicability of this method for the determination of urine LF levels in inflammatory and infectious diseases of the human urinary tract is also demonstrated.

Controlling Properties and Functions of Polymer Gels Using Photochemical Reactions

Photoresponsive polymer gels have attracted increasing interest owing to their potential applications in healable materials, drug release systems, and extracellular matrices. Because polymer gels provide suitable environments for photochemical reactions, their properties and functions can be controlled with light with a high spatiotemporal resolution. Herein, the design of photoresponsive polymer gels based on different types of photochemical reactions is introduced. The mechanism and applications of irreversible photoreactions, such as photoinduced free-radical polymerization, photoinduced click reactions, and photolysis, as well as reversible photoreactions such as photoinduced reversible cycloadditions, reversible photosubstitution of metal complexes, and photoinduced metathesis are reviewed. The remaining challenges of photoresponsive polymer gels are also discussed.