Effective Antifogging Coating from Hydrophilic/Hydrophobic Polymer Heteronetwork

Si-doped carbonized polymer dot as robust hydrophilic coating using for high efficiency antifogging

Hydrophilic coating can prevent surface from fogging but its application is limited by low mechanical performance. In this study, a hydrophilic coating was prepared by crosslinking the Si-doped carbonized polymer dot (Si-CPD) with 3-glycidyloxypropyltrimethoxysilane (GPTMS) and ethylene oxide (EO). The hydrophilic coating can be used as robust hydrophilic anti-fogging coating. The Si-CPD derived from ethylene diamine tetraacetic acid (EDTA) and aminopropyl oligosiloxanes (APOS) was successfully prepared via one-step hydrothermal method. Then, a resin solution was prepared by mixing Si-CPD, GPTMS and EO. Epoxy group of GPTMS and EO can react with amino group of Si-CPD. Finally, a composite coating with antifogging function can be obtained by simple heating curing. Due to the introduction of hydroxyl which derived from EO, the coating shows excellent antifogging performance. Meanwhile, the presence of inorganic component endows the coating with outstanding mechanical performance. The coating has great potential in related applications, such as optical lenses, mirrors and other transparency substrates.

Wetting Behavior-Induced Interfacial transmission of Energy and Signal: Materials, Mechanisms, and Applications

Wetting behaviors can significantly affect the transport of energy and signal (E&S) through vapor, solid, and liquid interfaces, which has prompted increased interest in interfacial science and technology. E&S transmission can be achieved using electricity, light, and heat, which often accompany and interact with each other. Over the past decade, their distinctive transport phenomena during wetting processes have made significant contributions to various domains. However, few studies have analyzed the intricate relationship between wetting behavior and E&S transport. This review summarizes and discusses the mechanisms of electrical, light, and heat transmission at wetting interfaces to elucidate their respective scientific issues, technical characteristics, challenges, commonalities, and potential for technological convergence. The materials, structures, and devices involved in E&S transportation are also analyzed. Particularly, harnessing synergistic advantages in practical applications and constructing advanced, multifunctional, and highly efficient smart systems based on wetted interfaces is the aim to provide strategies.

Preparation of Antifog Hard Coatings Based on Carboxy-Functionalized Polyhedral Oligomeric Silsesquioxane Cross-Linked with Oligo(ethylene glycol)s

In this study, we prepared antifog hard coatings by heating a mixture of carboxy-functionalized polyhedral oligomeric silsesquioxane (POSS-C) and oligo(ethylene glycol)s (OEGs, HO(CH2CH2O) n H, n = 1-6) in N,N-dimethylformamide, applying the mixture onto a glass substrate, and subsequently removing the solvent via heating. In addition, we evaluated the water resistance, hardness, and antifogging performance of the coatings. In particular, the coating produced at a 2:1 functional group ratio of POSS-C to tetraethylene glycol (OEG, n = 4) coating exhibited high surface hardness (6H), as determined using pencil scratch testing. The coating remained clear after exposure to the vapor of warm water at 40 °C at a height of 2 cm for 10 s, demonstrating its antifogging property. Furthermore, no dissolution or cracking was observed when the POSS-C/OEG coating (n = 4, COOH/OH = 2:1) was immersed in water at room temperature for 1 h, confirming its water resistance. The Fourier transform infrared/attenuated total reflectance results showed the formation of ester bonds, indicating the construction of a network structure that enhanced the water resistance and hardness of the coating.

Bioinspired Photoelectronic Synergy Coating with Antifogging and Antibacterial Properties

Optically transparent glass with antifogging and antibacterial properties is in high demand for endoscopes, goggles, and medical display equipment. However, many of the previously reported coatings have limitations in terms of long-term antifogging and efficient antibacterial properties, environmental friendliness, and versatility. In this study, inspired by catfish and sphagnum moss, a novel photoelectronic synergy antifogging and antibacterial coating was prepared by cross-linking polyethylenimine-modified titanium dioxide (PEI-TiO2), polyvinylpyrrolidone (PVP), and poly(acrylic acid) (PAA). The as-prepared coating could remain fog-free under hot steam for more than 40 min. The experimental results indicate that the long-term antifogging properties are due to the water absorption and spreading characteristics. Moreover, the organic-inorganic hybrid of PEI and TiO2 was first applied to enhance the antibacterial performance. The Staphylococcus aureus and the Escherichia coli growth inhibition rates of the as-prepared coating reached 97 and 96% respectively. A photoelectronic synergy antifogging and antibacterial mechanism based on the positive electrical and photocatalytic properties of PEI-TiO2 was proposed. This investigation provides insight into designing multifunctional bioinspired surface materials to realize antifogging and antibacterial that can be applied to medicine and daily lives.

New Surface Modification of Hydrophilic Polyvinyl Alcohol via Predrying and Electrospinning of Hydrophobic Polycaprolactone Nanofibers

Despite the excellent oxygen barrier and biodegradability of polyvinyl alcohol (PVA), its poor physical properties owing to its inherent hydrophilicity limit its application. In this paper, we report a novel surface modification technique for PVA films, involving the control of the predrying conditions (i.e., amount of residual solvent) of the coated PVA film and adjusting the electrospinning process of hydrophobic polycaprolactone (PCL) nanofibers onto the PVA films. The residual solvent of the coated PVA film was varied by changing the predrying time. A shorter predrying time increased the residual solvent content significantly (p < 0.05) and the flexibility of the coated PVA film. Moreover, scanning electron microscopy depicted the improved physical binding of hydrophobic PCL nanofibers to the hydrophilic PVA surface with increased penetration depth to the PVA film with shorter drying times. The PVA/PCL composite films with different predrying times and electrospun PCL nanofibers exhibited an apparent increase in the contact angle from 8.3° to 95.1°. The tensile strength of the pure PVA film increased significantly (p < 0.05) from 7.5 MPa to 77.4 MPa and its oxygen permeability decreased from 5.5 to 1.9 cc/m2·day. Therefore, our newly developed technique is cost-effective for modifying the surface and physical properties of hydrophilic polymers, broadening their industrial applications.

Practical Applications of Self-Healing Polymers Beyond Mechanical and Electrical Recovery

Self-healing polymeric materials, which can repair physical damage, offer promising prospects for protective applications across various industries. Although prolonged durability and resource conservation are key advantages, focusing solely on mechanical recovery may limit the market potential of these materials. The unique physical properties of self-healing polymers, such as interfacial reduction, seamless connection lines, temperature/pressure responses, and phase transitions, enable a multitude of innovative applications. In this perspective, the diverse applications of self-healing polymers beyond their traditional mechanical strength are emphasized and their potential in various sectors such as food packaging, damage-reporting, radiation shielding, acoustic conservation, biomedical monitoring, and tissue regeneration is explored. With regards to the commercialization challenges, including scalability, robustness, and performance degradation under extreme conditions, strategies to overcome these limitations and promote successful industrialization are discussed. Furthermore, the potential impacts of self-healing materials on future research directions, encompassing environmental sustainability, advanced computational techniques, integration with emerging technologies, and tailoring materials for specific applications are examined. This perspective aims to inspire interdisciplinary approaches and foster the adoption of self-healing materials in various real-life settings, ultimately contributing to the development of next-generation materials.

Rational design and easy fabrication of transparent photothermal/hygroscopic composite coatings with long-lasting antifogging performance under sunlight activation

Hygroscopic polymers are good candidates for antifogging coatings, but their long-term effectiveness is limited by the equilibrium between water absorption and expansion. As an efficient and environmentally friendly solution, photothermal materials are being introduced into the field of antifogging. However, there is a need for enhancement in the spectral characteristics of most photothermal materials within the visible light region. In addition, photothermal antifogging coatings often exhibit a delay in heating response, which hinders their ability to promptly evaporate condensed water droplets in the absence of illumination or during initial illumination. Here, a bilayer structure design of photothermal nanomaterials/hygroscopic polymers is proposed to achieve long-term antifogging under sunlight activation. Ensuring the rapid absorption of condensed water droplets on the coating surface, while simultaneously achieving efficient photothermal conversion for a swift temperature increase over the entire coating, is key to this approach, which will not only suppress early fogging but also lead to an exponential decrease of the nucleation rate of droplets. During this process, a dynamic equilibrium is gradually established between the condensation and evaporation of fog droplets, leading to long-term antifogging properties. The light transmittance of the composite coatings reaches as high as ca. 75% in the visible light region, making them well suited for a diverse range of transparent substrate and device applications. A clear field of view can be maintained for at least 6 h under 1 sun illumination above 65 °C hot steam. The antifogging/defogging performance is effectively demonstrated even under challenging non-ideal natural conditions, such as low solar irradiation during dusk or when placed indoors behind windows.

Topochemistry for Difficult Peptide-Polymer Synthesis: Single-Crystal-to-Single-Crystal Synthesis of an Isoleucine-Based Polymer, a Hydrophobic Coating Material

Polymers of hydrophobic amino acids are predicted to be potential coating materials for the creation of hydrophobic surfaces. The oligopeptides of hydrophobic amino acids are called "difficult peptides"; as the name suggests, it is difficult to synthesize them by conventional methods. We circumvented this synthetic challenge by adopting topochemical azide-alkyne cycloaddition (TAAC) polymerization of a hydrophobic dipeptide monomer. We designed an Ile-based dipeptide, decorated with azide and alkyne, which arrange in the crystal in a head-to-tail fashion with the azide and alkyne of the adjacent molecules in a ready-to-react orientation. The monomer, on mild heating of its crystals, undergoes regiospecific TAAC polymerization to yield a 1,4-disubstituted-triazole-linked polymer in a single-crystal-to-single-crystal fashion. The solid obtained after evaporation of the monomer solution also maintained crystallinity and underwent regiospecific topochemical polymerization as in the case of crystals. This topochemical polymerization could be studied using different techniques such as FTIR, NMR, DSC, GPC, MALDI, PXRD, and SCXRD. Since the polymer is insoluble in common solvents and hence difficult to coat surfaces, the monomer was first sprayed and evaporated on various surfaces and polymerized on the surface. Such polymer-coated surfaces exhibited water contact angles of up to 134°, showing that this Ile-derived polymer is very hydrophobic and can potentially be used as a coating material for various applications.

Fabrication of Robust Carbon Dots Containing Coatings with UV-Shielding, Light Conversion, and Antifogging Multiple Functions

Although a wide variety of single-function coatings have been successfully developed, the integration of multiple functions onto a single coating has remained an immense challenge in the field. Here, we report a simple room-temperature fabrication of robust coatings with UV-shielding, light conversion, and antifogging functionalities. The addition of glutaraldehyde (GA) molecular cross-linker and carbon dot (CD) nanocross-linker with light conversion function to poly(vinyl alcohol) (PVA) resulted in the formation of robust spatial structures of coatings. The fluorescence intensity tests demonstrated that the coatings had an excellent ability to absorb and convert ultraviolet light into blue-violet light. Both cold-warm and hot-vapor tests showed that the coatings had excellent antifogging performance. To our surprise, no creases were observed after coatings were immersed in water for 1 month, indicating that these are much stronger than those reported so far. The 8H pencil hardness and wear resistance attested to their excellent mechanical properties. The current preparation method can be operated at ambient temperature and is not restricted by the substrate type and shape. Therefore, it may also expand the possibilities for future applications of coatings for glass windows, optical microscopes, eyeglasses, agricultural greenhouses, and so on.

Development of antifogging double-layer film using cellulose nanofibers and carboxymethyl chitosan for white Hypsizygus marmoreus preservation

Films with simultaneously excellent mechanical and anti-fog properties are of great importance for food packaging. A novel strategy is described here to prepare long-lasting anti-fog film with antibacterial and antioxidant capabilities via a simple, green approach. The CMC (carboxymethyl chitosan) gel was integrated with CNF/TA (cellulose nanofibers/tannic acid) composite solution based on layer-by-layer assembly to form a membrane with a bilayer structure. The anti-fog performance of the bilayer film could be adjusted by regulating the CNF/TA layer thickness. On the whole, the developed anti-fog film had high mechanical strength and excellent UV shielding properties, as well as good antibacterial and antioxidant properties, and could be non-fogging for a long time under water vapor (40 °C). The effect of double layer anti-fog film (3%CmFT-3) on the fresh-keeping effect of white Hypsizygus marmoreus was compared at room temperature (28 °C) with commercially available anti-fog PVC film. The results showed that the bilayer anti-fog film could effectively prevent the generation of fog, delay the Browning, inhibit mildew, improve the overall acceptability, and effectively extend the shelf life of white Hypsizygus marmoreus. This biomass-based anti-fog film offers great potential for the development of multifunctional green food packaging.

Development of seaweed-derived polysaccharide/cellulose nanocrystal-based antifogging labels loaded with alizarin for monitoring aquatic products' freshness

Intelligent freshness indicator labels have attracted great interest for their massive potential in monitoring the freshness of aquatic products over the years. However, there is still a challenge where fogging on the labels during dramatic temperature changes affects the reading of freshness. At the same time, the freshness indicator labels need high mechanical strength to resist collision damage during transportation and storage. Herein, an antifogging freshness indicator label was developed based on seaweed extracts and alizarin. Firstly, soluble polysaccharides and insoluble components were extracted from Gelidium amansii, and cellulose nanocrystal (CNC) was further prepared from the insoluble components by sulfuric acid hydrolysis. Subsequently, a polysaccharide-based film was fabricated using soluble polysaccharides as the matrix materials and CNC as the reinforcement agent. Antifogging experiments showed that the hydrophilic composite films presented good antifogging performance. After loading with alizarin, the composite indicator label exhibited both antifogging and freshness-indicating properties for the salmon sample. The work provided a new idea for developing freshness indicator labels suitable for low-temperature transportation and storage.

Pumping and sliding of droplets steered by a hydrogel pattern for atmospheric water harvesting

Atmospheric water harvesting is an emerging strategy for decentralized and potable water supplies. However, water nucleation and microdroplet coalescence on condensing surfaces often result in surface flooding owing to the lack of a sufficient directional driving force for shedding. Herein, inspired by the fascinating properties of lizards and catfish, we present a condensing surface with engineered hydrogel patterns that enable rapid and sustainable water harvesting through the directional pumping and drag-reduced sliding of water droplets. The movement of microscale condensed droplets is synergistically driven by the surface energy gradient and difference in Laplace pressure induced by the arch hydrogel patterns. Meanwhile, the superhydrophilic hydrogel surface can strongly bond inner-layer water molecules to form a lubricant film that reduces drag and facilitates the sliding of droplets off the condensing surface. Thus, this strategy is promising for various water purification techniques based on liquid-vapor phase-change processes.

Thiol-ene click reaction as an effective tool for the synthesis of PEG-functionalized alkoxysilanes-precursors of anti-fog coatings

The article presents a very simple method of glass modification to obtain the anti-fog effect. Silanes containing two types of functional groups, namely a hydrophilic and polar polyether group and an alkoxysilyl group (to bond with the surface of the modified material) were synthesized in thiol-ene reactions. The hydrothiolation reactions of polyethers containing a C=C terminal bond with mercaptoalkoxysilane proceeded efficiently, yielding quantitatively appropriate products under mild reaction conditions. This method enabled the synthesis of a series of alkoxysilanes functionalized with polyethers, differing in structure. The group of obtained derivatives was characterized by 1H, 13C, 29Si NMR, and FT-IR analyses, and then used to prepare coatings on glass using the sol-gel method. The coated glass surfaces exhibited transparency, superhydrophilic or hydrophilic properties, anti-fog and anti-frost performance.

Transparent superhydrophilic composite coating with anti-fogging and self-cleaning properties

Superhydrophilic coatings have incomparable advantages in anti-fogging and self-cleaning but are limited to poor abrasion resistance and water resistance. Consequently, the research on the contradiction between hydrophilicity and water resistance, as well as abrasion resistance and visible transmittance, has become a focus of superhydrophilic coatings. Herein, we design a ceramic-polymer superhydrophilic composite coating with a high density, strong cross-linking structure, and smooth surface. Because of its static water contact angle (WCA = 3.2°) and short water spreading time (ST = 1878 ms), the transparent composite coating exhibits anti-fogging performance. Meanwhile, it exhibits anti-fogging durability even after 400 Taber abrasion cycles under a 250 g load or immersion in boiling water for 30 min. Furthermore, the result of self-cleaning characterization and theoretical analysis demonstrate that the low surface roughness endows the composite coating with excellent self-cleaning properties. The composite coating can effectively scavenge oil and dust pollution on its surface in a humid environment. Thus, the developed composite coating in this work is potential in the anti-fogging and self-cleaning fields.

Recent advances in prevailing antifogging surfaces: structures, materials, durability, and beyond

In past decades, antifogging surfaces have drawn more and more attention owing to their promising and wide applications such as in aerospace, traffic transportation, optical devices, the food industry, and medical and other fields. Therefore, the potential hazards caused by fogging need to be solved urgently. At present, the up-and-coming antifogging surfaces have been developing swiftly, and can effectively achieve antifogging effects primarily by preventing fog formation and rapid defogging. This review analyzes and summarizes current progress in antifogging surfaces. Firstly, some bionic and typical antifogging structures are described in detail. Then, the antifogging materials explored thus far, mainly focusing on substrates and coatings, are extensively introduced. After that, the solutions for improving the durability of antifogging surfaces are explicitly classified in four aspects. Finally, the remaining big challenges and future development trends of the ascendant antifogging surfaces are also presented.

Superhydrophobic film from silicone-modified nanocellulose and waterborne polyurethane through simple sanding process

How to improve the water and pollution resistance of films has been a major stumbling block in applications of waterborne coatings. To solve this problem, a new strategy was developed to construct waterborne superhydrophobic polyurethane composite films by modifying cellulose nanocrystal (CNC) with polysiloxane and doping the modified CNC into waterborne polyurethane (WPU). The super-hydrophobic functionalization with a water contact angle >150° was achieved by simple sanding. The effects of CNC on the morphology, thermal, mechanical, and hydrophobic properties of the obtained superhydrophobic composite films were investigated. The simple sanding process formed a large number of rough porous structures on the surface of the film, which improved the superhydrophobic properties of the film. And after 30 sanding cycles, the film still had excellent hydrophobicity (water contact angle >150°). This easy and effective method for the preparation of superhydrophobic films has great practical application value in the area of waterborne coatings.

Combined antifogging and antireflective double nanostructured coatings for LiDAR applications

To increase the performance of optical systems, a good antireflective coating is required to ensure low reflectance and high transmittance of optical surfaces. Further problems, such as fogging that causes light scattering, negatively affect the image quality. This implies that other functional properties are also required. Presented here is a highly promising combination of an antireflective double nanostructure on top of an antifog coating with long-term stable properties, generated in a commercial plasma-ion-assisted coating chamber. It is demonstrated that the nanostructures do not affect the antifog properties and can be successfully used for many applications.

Long-Term Antifogging Coating Based on Black Phosphorus Hybrid Super-Hydrophilic Polymer Hetero-Network

The antifogging coating based on super-hydrophilic polymer is regarded as the most promising strategy to avoid fogging but suffers from short-term effectiveness due to antifogging failure induced by water invasion. In this study, a black phosphorus nanosheets (BPs) hybrid polymer hetero-network coating (PUA/PAHS/BPs HN) was prepared by UV curing for the first time to achieve long-term antifogging performance. The polymer hetero-network (HN) structure was composed of two novel cross-linked acrylic resin and polyurethane acrylate. Different from physical blending, a covalent P-C bond between BPs and polymer is generated by UV initiated free radical reaction, resulting in BPs firmly embedded in the polymer HN structure. The BPs enriched on the coating surface by UV regulating migration prevent permeation of water towards the inside of the coating through its own good water-based lubricity and water absorption capacity. Compared with the nonhybrid polymer HN, PUA/PAHS/BPs HN not only has higher hardness and better friction resistance properties, but also exhibits superior water resistance and longer antifogging duration. Since water invasion was greatly reduced by BPs, the PUA/PAHS/BPs HN coating maintained antifogging duration for 60 min under a 60 °C water vapor test and still maintained long-term antifogging performance after being immersed in water for 5 days.