SERS Hotspot Engineering by Aerosol Self-Assembly of Plasmonic Ag Nanoaggregates with Tunable Interparticle Distance

A novel three-dimensional porous Ag/TiO2 hybrid aerogels with high dense hot spot as effective SERS substrate for ultrasensitive detection

This research focuses on preparing a series of new TiO2/Ag hybrid aerogels with varying TiO2 contents, and demonstrates their application as ultrasensitive SERS substrates. The synthesized TiO2/Ag hybrid aerogels exhibited excellent SERS behavior when detecting 4-Mercaptobenzoic acid (4-MBA), and the calculated SERS enhancement factor (EF) was 6.34 × 106. 3D structured aerogels can create more hot spots and adsorption sites, and multiple interband chemical transfer (CT) pathways emerged and enhanced CT efficiency because of the large number of surface oxygen vacancies of meso-TiO2 NPs. Therefore, the synergy of electromagnetic field enhancement and chemical enhancement leads to SERS enhancement. In addition, the composite SERS substrate has high sensitivity, and the detection limit of adsorbed 4-MBA probe molecules reaches 10-11 M. Furthermore, the TiO2/Ag hybrid aerogels demonstrate good reproducibility with minimal standard deviation in terms of SERS signals. In addition, even after standing for 6 months, there is almost no attenuation in the SERS signal intensity, which highlights the excellent stability of this substrate. Therefore, these highly sensitive TiO2/Ag hybrid aerogels SERS substrates have important practical value in environmental monitoring, medical inspection and food supervision.

Utilization of microdroplets as optical lenses for surface-enhanced Raman spectroscopy (SERS) enhancement on localized silver nanoparticle-decorated porous silicon substrates

Surface-enhanced Raman spectroscopy (SERS) is a widely used analytical technique known for its high sensitivity and broad applicability. Despite its potential, SERS faces challenges related to detection sensitivity and reproducibility. This study proposes an innovative method to enhance SERS performance by employing water microdroplets as optical lenses on localized silver nanoparticle-decorated porous silicon (LocAg-PS) substrates. The hydrophobic nature of the LocAg-PS substrate not only ensures precise positioning of the microdroplet lenses on the silver nanoparticle grafted pad (AgNP pad) but also forms a plano-convex-like microdroplet lens for the focusing of the excitation laser and the collection of scattered light. Experimental results demonstrate that using microdroplet lenses enhances the SERS signal intensity and reproducibility, providing a rapid and cost-effective solution for advanced SERS analysis.

Silver/gold nanoalloy implant coatings with antibiofilm activity via pH-triggered silver ion release

Implant infections are a major challenge for the healthcare system. Biofilm formation and increasing antibiotic resistance of common bacteria cause implant infections, leading to an urgent need for alternative antibacterial agents. In this study, the antibiofilm behaviour of a coating consisting of a silver (Ag)/gold (Au) nanoalloy is investigated. This alloy is crucial to reduce uncontrolled potentially toxic Ag+ ion release. In neutral pH environments this release is minimal, but the Ag+ ion release increases in acidic microenvironments caused by bacterial biofilms. We perform a detailed physicochemical characterization of the nanoalloys and compare their Ag+ ion release with that of pure Ag nanoparticles. Despite a lower released Ag+ ion concentration at pH 7.4, the antibiofilm activity against Escherichia coli (a bacterium known to produce acidic pH environments) is comparable to a pure nanosilver sample with a similar Ag-content. Finally, biocompatibility studies with mouse pre-osteoblasts reveal a decreased cytotoxicity for the alloy coatings and nanoparticles.

Plasma amplifiers: multiscale light-enhanced uniform SERS composite substrates for breaking through resonance limitations

A phenomenon known as plasmon resonance constitutes a unique optical effect that can induce an enhancement in localized electromagnetic fields, resulting in a substantial increase in the electromagnetic field intensity surrounding metallic nanostructures. In this work, the coupling effect of excitation of surface plasmon polaritons and local surface plasmons in nanoparticles is deeply studied under the background of nanoparticles/one-dimension grating composite structures through grating matching. By employing finite-difference time-domain simulations as our methodological approach, we discern gratings with a periodicity of 1.5 μm support surface plasmon bound states between the gratings. Furthermore, the modulation of SPs along the vertical sidewalls of the grating due to standing wave effects exhibits oscillatory behavior with varying grating heights. Experimental results obtained from the nanoparticle/grating composite SERS substrate validate theoretical predictions, demonstrating higher enhanced Raman signals at 633 nm compared to 532 nm. Remarkably, this structure exhibits good performance, with R6G detection sensitivity down to concentrations as low as 10-10 M and mapping achieving a relative standard deviation of 7.79%, underscoring its uniformity and capability of electromagnetic field enhancement.

Macroscopic Superlattice Membranes Self-Assembled from Gold Nanobipyramids with Precisely Tunable Tip Arrangements for SERS

A persistent challenge in utilizing Au nanocrystals for surface-enhanced Raman spectroscopy (SERS) lies in achieving controllable superstructures that maximize SERS performance. Here, a novel strategy is proposed to enhance the SERS performance by precisely adjusting the tip arrangements of Au nanobipyramids (BPs) in two-dimensional (2D) superlattices (SLs). This is achieved through ligand-exchange of Au BPs, followed by liquid-air interfacial assembly, resulting in large-area, transferrable SL membranes. The key to controlling the arrangement of Au BPs in the SLs is the regulation of the amount of free ligands added during self-assembly, which allows for the precise formation of various configurations such as tilted SLs, tip-on-tip SLs, and tip-to-tip SLs. Among these configurations, tip-on-tip SLs exhibit the highest enhancement factor for SERS, reaching an impressive value of 1.95×108, with uniform and consistent SERS signals across a large area. The experimental findings are further corroborated by simulations using the finite element method. This study establishes an efficient method for engineering the microstructure of 2D SLs composed of Au BPs, highlighting the importance of fine-tuning the tip arrangements of Au BPs to regulate SERS performance.

Detection of surface enhanced Raman scattering active hotspot using near field scanning optical microscopy

Hotspots are high-intensity electromagnetic zones that form, for example, at the interstitials of plasmonic nanoaggregates, resulting in a considerable rise in the enhancement factor. However, it is inevitable to achieve specific nanometric geometry as well as a suitable technique to capture the details of hotspots. We report near-field surface-enhanced Raman scattering (SERS) spectroscopy of a well-defined gold nanoaggregate of a few nanoparticles adsorbed with a small number of target analytes. A spectrally and spatially resolved SERS measurement setup using an aperture near-field scanning optical microscope (a-NSOM) facilitated the direct observation of localized electromagnetic (EM) fields at the interstitials through SERS. Correlated optical image and corresponding nanometric geometry were captured through the home-built a-NSOM setup. Near-field SERS spectra were recorded at different sites of interest. It was evident that the interstitial positioned at the center of the tetramer provided the most intense Raman scattering, implying the possibility of a SERS-active hotspot therein. SERS bands of the spectrum of the Raman-active dye Rhodamine 6G recorded at the same hotspot coincided well with those reported so far. It was noteworthy that most of the SERS bands in such scenery got enhanced. Such direct observation with high spatial resolution is indispensable to understanding the origin of localized EM fields at "hotspots" and the EM enhancement factor in the SERS process. A finite-difference time-domain (FDTD) analysis was carried out to validate the results.

Advances in flame synthesis of nano-scale architectures for chemical, biomolecular, plasmonic, and light sensing

Flame spray pyrolysis (FSP), a key technique under the broader category of flame aerosol synthesis, is being increasingly explored for the design of advanced miniaturized sensor architectures with applications including chemical, biomolecular, plasmonic, and light sensing. This review provides an overview of the advantages of FSP for the fabrication of nanostructured materials for sensing, delving into synthesis strategies and material structures that meet the increasing demands for miniaturized sensor devices. We focus on the fundamentals of FSP, discussing reactor configurations and how process parameters such as precursor compositions, flow rates, and temperature influence nanoparticle characteristics and their sensing performance. A detailed analysis of nanostructures, compositions, and morphologies made by FSP and their applications in chemical, chemiresistive, plasmonic, biosensing, and light sensing is presented. This review identifies the challenges and opportunities of FSP, exploring current limitations and potential improvements for industrial translation. We conclude by highlighting future research directions aiming to establish guidelines for the flame-based design of nano-scale sensing architectures.

Towards a scalable and controllable preparation of highly-uniform surface-enhanced Raman scattering substrates: Defect-free nanofilms as templates

The uniformity and reproducibility of substrates highly determine the applicability of surface-enhanced Raman scattering (SERS). Production of them, however, remains a challenge. Herein, we report a template-based strategy for the strictly controllable and handily scalable preparation of a very uniform SERS substrate, Ag nanoparticles (AgNPs)/nanofilm, where the template used is a flexible, transparent, self-standing, defect-free and robust nanofilm. Importantly, the obtained AgNPs/nanofilm is self-adhesive to surfaces of different properties and morphologies, ensuring in-situ and at real-time SERS detection. The enhancement factor (EF) of the substrate for rhodamine 6G (R6G) could reach 5.8 × 10¹⁰ with a detection limit (DL) of 1.0 × 10^-15 mol L^-1. Moreover, 500 bending tests and one-month storage showed no observable performance degradation, and up to 50.0 cm² scaled-up preparation depicted negligible effect upon the structure and the sensing performance. The real-life applicability of AgNPs/nanofilm was demonstrated by the sensitive detection of tetramethylthiuram disulfide on cherry tomato and fentanyl in methanol with a routine handheld Raman spectrometer. This work thus provides a reliable strategy for large area wet-chemical preparation of high-quality SERS substrates.

Flexible Substrate of Cellulose Fiber/Structured Plasmonic Silver Nanoparticles Applied for Label-Free SERS Detection of Malathion

Surface-enhanced Raman scattering (SERS) is considered an efficient technique providing high sensitivity and fingerprint specificity for the detection of pesticide residues. Recent developments in SERS-based detection aim to create flexible plasmonic substrates that meet the requirements for non-destructive analysis of contaminants on curved surfaces by simply wrapping or wiping. Herein, we reported a flexible SERS substrate based on cellulose fiber (CF) modified with silver nanostructures (AgNS). A silver film was fabricated on the membrane surface with an in situ silver mirror reaction leading to the formation of a AgNS-CF substrate. Then, the substrate was decorated through in situ synthesis of raspberry-like silver nanostructures (rAgNS). The SERS performance of the prepared substrate was tested using 4-mercaptobenzoic acid (4-MBA) as a Raman probe and compared with that of the CF-based plasmonic substrates. The sensitivity of the rAgNS/AgNS-CF substrate was evaluated by determining the detection limit of 4-MBA and an analytical enhancement factor, which were 10 nM and ~10⁷, respectively. Further, the proposed flexible rAgNS/AgNS-CF substrate was applied for SERS detection of malathion. The detection limit for malathion reached 0.15 mg/L, which meets the requirements about its maximum residue level in food. Thus, the characteristics of the rAgNS/AgNS-CF substrate demonstrate the potential of its application as a label-free and ready-to-use sensing platform for the SERS detection of trace hazardous substances.

Highly Efficient Near-IR Photothermal Microneedles with Flame-Made Plasmonic Nanoaggregates for Reduced Intradermal Nanoparticle Deposition

Near-infrared (NIR) photothermal therapy by microneedles (MNs) exhibits high potential against skin diseases. However, high costs, photobleaching of organic agents, low long-term stability, and potential nanotoxicity limit the clinical translation of photothermal MNs. Here, photothermal MNs are developed by utilizing Au nanoaggregates made by flame aerosol technology and incorporated in water-insoluble polymer matrix to reduce intradermal nanoparticle (NP) deposition. The individual Au interparticle distance and plasmonic coupling within the nanoaggregates are controlled by the addition of a spacer during their synthesis rendering the Au nanoaggregates highly efficient NIR photothermal agents. In situ aerosol deposition of Au nanoaggregates on MN molds results in the fabrication of photothermal MNs with thin plasmonic layers. The photothermal performance of these MN arrays is compared to ones made by three methods utilizing NP dispersions, and it is found that similar temperatures are reached with 28-fold lower Au mass due to reduced light scattering losses of the thin layers. Finally, all developed photothermal MN arrays here cause clinically relevant hyperthermia at benign laser intensities while reducing intradermal NP deposition 127-fold compared to conventional MNs made with water-soluble polymers. Such rational design of photothermal MNs requiring low laser intensities and minimal NP intradermal accumulation sets the basis for their safe clinical translation.

A Novel Bio-Inspired Ag/3D-TiO2/Si SERS Substrate with Ordered Moth-like Structure

This paper reports a novel method to fabricate a bio-inspired SERS substrate with low reflectivity, ultra-sensitivity, excellent uniformity, and recyclability. First, double layers of polystyrene spheres with different particle sizes were assembled on the surface of a silicon wafer to act as a moth-like template. Second, through the template sacrifice method, the TiO₂ film with a three-dimensional moth-like eye structure was induced by the double-layer polystyrene spheres in the previous step, and its microscopic morphology showed a high degree of order. Finally, Ag nanoparticles were assembled on the TiO₂ film to form a bio-inspired SERS substrate. This ordered bio-inspired structure can not only reduce reflection, but also reinforce the uniformity of hotspot density, which helps to improve the sensitivity and uniformity of the Raman signal. This bio-inspired SERS substrate can detect R6G molecules at a concentration as low as 1.0 × 10^-10 mol/L, and its enhancement factor (EF) can reach 6.56 × 10⁶. In addition, the composite of Ag and TiO₂ can realize the photocatalytic degradation of R6G and then realize the recyclability of the SERS substrate.

Nanosensor Applications in Plant Science

Plant science is a major research topic addressing some of the most important global challenges we face today, including energy and food security. Plant science has a role in the production of staple foods and materials, as well as roles in genetics research, environmental management, and the synthesis of high-value compounds such as pharmaceuticals or raw materials for energy production. Nanosensors-selective transducers with a characteristic dimension that is nanometre in scale-have emerged as important tools for monitoring biological processes such as plant signalling pathways and metabolism in ways that are non-destructive, minimally invasive, and capable of real-time analysis. A variety of nanosensors have been used to study different biological processes; for example, optical nanosensors based on Förster resonance energy transfer (FRET) have been used to study protein interactions, cell contents, and biophysical parameters, and electrochemical nanosensors have been used to detect redox reactions in plants. Nanosensor applications in plants include nutrient determination, disease assessment, and the detection of proteins, hormones, and other biological substances. The combination of nanosensor technology and plant sciences has the potential to be a powerful alliance and could support the successful delivery of the 2030 Sustainable Development Goals. However, a lack of knowledge regarding the health effects of nanomaterials and the high costs of some of the raw materials required has lessened their commercial impact.