A Lightweight, Elastic, and Thermally Insulating Stealth Foam With High Infrared-Radar Compatibility

Construction of chitosan/alginate aerogels with three-dimensional hierarchical pore network structure via hydrogen bonding dissolution and covalent crosslinking synergistic strategy for thermal management systems

To replace traditional petrochemical-based thermal insulation materials, in this work, the chitosan (CHI)/alginate (ALG) (CA) aerogels with three-dimensional hierarchical pore network structure were constructed by compositing CHI and ALG using a synergistic strategy of hydrogen bonding dissolution and covalent crosslinking. The structure and properties were further regulated by crosslinking the CA aerogels with epichlorohydrin (ECH). The CA aerogels exhibited various forms of covalent crosslinking, hydrogen bonding and electrostatic interactions, with hydrogen bonding content reaching 79.12 %. The CA aerogels showed an excellent three-dimensional hierarchical pore network structure, with an average pore size minimum of 15.92 nm. The structure regulation of CA aerogels obtained excellent compressive properties, with an increase of stress and strain by 137.61 % and 45.05 %, which can support a heavy object 5000 times its weight. Additionally, CA aerogels demonstrate excellent thermal insulation properties and low thermal conductivity, comparable to commercially available insulation materials. More importantly, CA aerogels have good cyclic insulation stability and thermal properties, and they have a flame retardancy rating of V-0, which shows the stability of insulation properties and excellent safety. CA aerogels provide new ideas for the development of biomass thermal insulation materials and are expected to be candidates for thermal management applications.

Electromagnetic porous lignocellulosic matrix composites: A green electromagnetic shielding material with high absorption efficient electromagnetic interference

Electromagnetic interference (EMI) shielding materials play a vital role in human society, especially in light of the rapid development of electronic communication equipment. Therefore, it is urgent to develop green, high-efficiency EMI shielding materials. Wood, as a renewable raw material, possesses significant structural advantages in studying EMI materials due to its unique 3D pore structure. Herein, we report magnetoelectric lignocellulosic matrix composites derived from the delignified wood for efficient EMI shielding. The composite was fabricated by in-situ polymerization of PEDOT conductive coating and magnetic Fe3O4 in delignified wood. The conductive 3D pore structure of Fe3O4/PEDOT@wood could effectively cause dielectric loss and multiple internal reflections. Combined with the magnetic loss of Fe3O4, the material exhibited excellent EMI shielding effectiveness (SE), which could be attributed to the synergistic effect of dielectric and magnetic losses. The Fe3O4/PEDOT@wood showed excellent conductivity (103 S/m), good magnetism (26.7 emu/g), the EMI SE up to 59.8 dB, and high SEA/SET ratios of∼84.2 % to 95.7 % at 2 mm in X -band. Moreover, the material exhibited a high compressive strength and tensile strength of 100.8 MPa and 18.1 MPa, respectively. Therefore, this work provided a reference for the preparation of high-efficiency EMI shielding materials.

Multifunctional MoCx Hybrid Polyimide Aerogel with Modified Porous Defect Engineering for Highly Efficient Electromagnetic Wave Absorption

Traditional electromagnetic absorbing materials (EWAMs) are usually single functions and can easily affect their performance in diverse application scenarios. Effective integration of EWAMs into multiple function components is a valuable strategy to achieve maximum absorption and multifunction performance while maintaining their indispensable physical and chemical properties. In this work, the polyoxometalates (POMs) serving as "guests" are embedded within the Co-MOFs to construct 3d/4d-bimetallic based crystalline precursors of dielectric/magnetic synergistic system. The proper pyrolysis temperature induced the homogeneously distributed metallic Co and MoCx hetero-units into carbon matrix with modified porous defect engineering to enhance electromagnetic wave (EW). Owing to the brilliant synergistic effect of polarization, magnetic loss, and impedance matching, the superior RLmin of -47.72 dB at 11.76 GHz at the thickness of 2.0 mm and a wide adequate absorption bandwidth (EAB) of 4.58 GHz (7.44-12.02 GHz) covered the whole X-band at the thickness of 2.5 mm for η-MoC/Co@NC-800 are observed. More importantly, the resulting MoCx hybrid polyimide (MCP) aerogel exhibits desirable properties such as structural robustness, nonflammability, excellent thermal insulation, and self-cleaning capabilities that are comparable to those of commercially available products. This work offers inspiration and strategy for creating multipurpose microwave absorbers with intricate structural designs.

Lightweight Dual-Functional Segregated Nanocomposite Foams for Integrated Infrared Stealth and Absorption-Dominant Electromagnetic Interference Shielding

Lightweight infrared stealth and absorption-dominant electromagnetic interference (EMI) shielding materials are highly desirable in areas of aerospace, weapons, military and wearable electronics. Herein, lightweight and high-efficiency dual-functional segregated nanocomposite foams with microcellular structures are developed for integrated infrared stealth and absorption-dominant EMI shielding via the efficient and scalable supercritical CO2 (SC-CO2) foaming combined with hydrogen bonding assembly and compression molding strategy. The obtained lightweight segregated nanocomposite foams exhibit superior infrared stealth performances benefitting from the synergistic effect of highly effective thermal insulation and low infrared emissivity, and outstanding absorption-dominant EMI shielding performances attributed to the synchronous construction of microcellular structures and segregated structures. Particularly, the segregated nanocomposite foams present a large radiation temperature reduction of 70.2 °C at the object temperature of 100 °C, and a significantly improved EM wave absorptivity/reflectivity (A/R) ratio of 2.15 at an ultralow Ti3C2Tx content of 1.7 vol%. Moreover, the segregated nanocomposite foams exhibit outstanding working reliability and stability upon dynamic compression cycles. The results demonstrate that the lightweight and high-efficiency dual-functional segregated nanocomposite foams have excellent potentials for infrared stealth and absorption-dominant EMI shielding applications in aerospace, weapons, military and wearable electronics.

Ultrawide Spectra Camouflage Coatings from Metallic Flake Powder

Ultrawide-spectra-compatible camouflage materials are imperative for military science and national security due to the continuous advancement of various sophisticated multispectral detectors. However, ultrawide spectra camouflage still has challenges, as the spectral requirements for different bands are disparate and even conflicting. This work demonstrates an ultrawide spectra camouflage material compatible with visible (VIS, 400-800 nm), infrared (IR, 3-5 and 8-14 μm), and microwave (S-Ku bands, 2-12 GHz). The carbon nanotubes adsorbed on porous anodic alumina/aluminum flake powder (CNTs@PAA/AFP) material for ultrawide spectra camouflage is composed of bioinspired porous alumina surface layers for low visible reflection and aluminum flake powder substrate for low infrared emissivity, while the surface of the porous alumina layers is loaded with carbon nanotubes for microwave absorption. Compared with previous low-emissivity materials, CNTs@PAA/AFP has omnidirectional low reflectance (Ravg = 0.29) and high gray scale (72%) in the visible band. Further, it exhibits low emissivity (ε3-5μm = 0.15 and ε8-14μm = 0.18) in the dual infrared atmospheric window, which reduces the infrared lock-on range by 59.6%/49.8% in the mid/far-infrared band at high temperatures (573 K). The infrared camouflage performance calculated from the radiation temperature of CNTs@PAA/AFP coatings is enhanced to over 65%, which is at least 4 times greater than that of its substrate. In addition, the CNTs@PAA/AFP coating achieves high microwave absorption (RLmin = -42.46 dB) and an effective absorption bandwidth (EAB = 7.43 GHz) in the microwave band (S-Ku bands) due to the enhancement of interfacial polarization and conductive losses. This study may introduce new insight and feasible methods for multispectral manipulation, electromagnetic signal processing, and thermal management via bioinspired structural design and fabrication.

Embedding Multiple Magnetic Components in Carbon Nanostructures via Metal-Oxo Cluster Precursor for High-Efficiency Low-/Middle-Frequency Electromagnetic Wave Absorption

With the advent of wireless technology, magnetic-carbon composites with strong electromagnetic wave (EMW) absorption capability in low-/middle-frequency range are highly desirable. However, it remains challenging for rational construction of such absorbers bearing multiple magnetic components that show uniform distribution and favorable magnetic loss. Herein, a facile metal-oxo cluster (MOC) precursor strategy is presented to produce high-efficiency magnetic carbon composites. Nanosized MOC Fe15 shelled with organic ligands is employed as a novel magnetic precursor, thus allowing in situ formation and uniform deposition of multicomponent magnetic Fe/Fe3O4@Fe3C and Fe/Fe3O4 nanoparticles on graphene oxides (GOs) and carbon nanotubes (CNTs), respectively. Owing to the good dispersity and efficient magnetic-dielectric synergy, quaternary Fe/Fe3O4@Fe3C-GO exhibits strong low-frequency absorption with RLmin of -53.5 dB at C-band and absorption bandwidth covering 3.44 GHz, while ultrahigh RLmin of -73.2 dB is achieved at X-band for ternary Fe/Fe3O4-CNT. The high performance for quaternary and ternary composites is further supported by the optimal specific EMW absorption performance (-15.7 dB mm-1 and -31.8 dB mm-1) and radar cross-section reduction (21.72 dB m2 and 34.37 dB m2). This work provides a new avenue for developing lightweight low-/middle-frequency EMW absorbers, and will inspire the investigation of more advanced EMW absorbers with multiple magnetic components and regulated microstructures.

Constructing gradient reflection and scattering porous framework in composite aerogels for enhanced microwave absorption

Developing high-performance microwave absorption (MA) materials becomes an urgent concern in the field of electromagnetic protection. Constructing porous framework is an efficient approach to MA owing to the abilities of adjusting impedance matching and providing more reflection and scattering paths for electromagnetic waves. Herein, a cellulose nanofibril (CNF)/honeycomb-like carbon-shell encapsulated FeCoNi@C/carbon nanotube (CNT) composite aerogel was fabricated via a facile freeze-drying method. The super-lightweight composites showed a distinctive gradient structure for reflection and scattering inside aerogel pores, micrometer small pores, and nano-fillers on the pore walls. The composite aerogel showed an ideal minimum reflection loss (RLmin) of -43.6 dB and remarkable adjustable effective absorption bandwidth (EAB) of 12.18 GHz due to good impedance matching, unique gradient porous structure, and synergies of multiple loss mechanisms. Therefore, this work will provide a viable strategy to improve the MA capability of absorbers by taking full advantage of constructing gradient reflection and scattering porous structure.

UV-modification of Ag nanoparticles on α-MoCx for interface polarization engineering in electromagnetic wave absorption

The design of electromagnetic wave absorbing materials (EWAMs) has aroused great attention with the express development of electromagnetic devices, which pose a severe EM pollution risk to human health. Herein, an Ag-doped MoCx composite was designed and constructed through a UV-light-induced self-reduction process. The UV-reduction time was controlled on the α-MoC polymer for 0.5-2 hours for modifying different amounts of Ag. As a result, α-MoC@Ag-1.5 exhibited the strongest RLmin of -56.51 dB at 8.8 GHz under a thickness of 3.0 mm and the widest EAB of 4.96 GHz (12.16-17.12 GHz) covering a substantial portion of the Ku-band at a thickness of 2.0 mm due to the synergy of the conductivity loss and abundant interfacial polarization sites. Additionally, a new strategy for computer simulation technology was proposed to simulate substantial radar cross-sectional reduction values with real far-field conditions, whereby absorbing coatings with α-MoC@Ag-1.5 were proved to contribute to a remarkable radar cross-sectional reduction of 37.4 dB m2.

Joule-Heating-Driven Synthesis of a Honeycomb-Like Porous Carbon Nanofiber/High Entropy Alloy Composite as an Ultralightweight Electromagnetic Wave Absorber

High entropy alloys (HEA) have garnered significant attention in electromagnetic wave (EMW) absorption due to their efficient synergism among multiple components and tunable electronic structures. However, their high density and limited chemical stability hinder their progress as lightweight absorbers. Incorporating HEA with carbon offers a promising solution, but synthesizing stable HEA/carbon composite faces challenges due to the propensity for phase separation during conventional heat treatments. Moreover, EMW absorption mechanisms in HEAs may be different from established empirical models due to their high-entropy effect. This underscores the urgent need to synthesize stable and lightweight HEA/carbon absorbers and uncover their intrinsic absorption mechanisms. Herein, we successfully integrated a quinary FeCoNiCuMn HEA into a honeycomb-like porous carbon nanofiber (HCNF) using electrostatic spinning and the Joule-heating method. Leveraging the inherent lattice distortion effects and honeycomb structure, the HCNF/HEA composite demonstrates outstanding EMW absorption properties at an ultralow filler loading of 2 wt %. It achieves a minimum reflection loss of -65.8 dB and boasts a maximum absorption bandwidth of up to 7.68 GHz. This study not only showcases the effectiveness of combining HCNF with HEA, but also underscores the potential of Joule-heating synthesis for developing lightweight HEA-based absorbers.

Sn Whiskers from Ti2 SnC Max Phase: Bridging Dual-Functionality in Electromagnetic Attenuation

In the ever-evolving landscape of complex electromagnetic (EM) environments, the demand for EM-attenuating materials with multiple functionalities has grown. 1D metals, known for their high conductivity and ability to form networks that facilitate electron migration, stand out as promising candidates for EM attenuation. Presently, they find primary use in electromagnetic interference (EMI) shielding, but achieving a dual-purpose application for EMI shielding and microwave absorption (MA) remains a challenge. In this context, Sn whiskers derived from the Ti2 SnC MAX phase exhibit exceptional EMI shielding and MA properties. A minimum reflection loss of -44.82 dB is achievable at lower loading ratios, while higher loading ratios yield efficient EMI shielding effectiveness of 42.78 dB. These qualities result from a delicate balance between impedance matching and EM energy attenuation via adjustable conductive networks; and the enhanced interfacial polarization effect at the cylindrical heterogeneous interface between Sn and SnO2 , visually characterized through off-axis electron holography, also contributes to the impressive performance. Considering the compositional diversity of MAX phases and the scalable fabrication approach with environmental friendliness, this study provides a valuable pathway to multifunctional EM attenuating materials based on 1D metals.

Transformation of 2D Flakes to 3D Hollow Bowls: Matthew Effect Enables Defects to Prevail in Electromagnetic Wave Absorption of Hollow rGO Bowls

High-efficiency electromagnetic (EM) wave (EMW)-absorbing materials have attracted extensive scientific and technical interest. Although identifying the dominant EM loss mechanism in dielectric-loss materials is indispensable, it is challenging due to a complex synergism between dipole/interfacial polarization and conduction loss. Modulation of defects and microstructures can be a possible approach to determine the dominant EM loss mechanism and realize high-efficiency absorption. Herein, 2D reduced graphene oxide (rGO) flakes are integrated into a 3D hollow bowl-like structure, which increases defect sites (i.e., oxygen vacancy and lattice defect) and reduces the stacked thickness of rGO. Despite their lower stacked thicknesses, the hollow rGO bowls with more defects exhibit lower conductivities but higher permittivities. Accompanied by the transformation from 2D flakes to 3D hollow bowls, the dominant EM loss mechanism of rGO transforms from conduction loss to defect-induced polarization. Furthermore, the defect engineering and structural design endow rGO with well-matched impedance and strong EMW-absorbing capacity. A minimum reflection loss of -41.6 dB (1.3 mm) and an effective absorption bandwidth of 4.8 GHz (1.5 mm) is achieved at a filler loading of 5 wt%. This study will provide meaningful insights into the development of materials with superior EMW-absorbing performances via defect engineering and structural design.

MOF-derived Co-C composites with 3D star structure for enhanced microwave absorption

The demand of microwave absorption materials (MAMs) with unique morphologies and electromagnetic (EM) balance has become necessary in recent years. Due to the ease of synthesis and tunable structure, metal-organic frameworks (MOFs) are widely used for this special MAMs. In this study, a new three-dimensional hybrid MOF is proposed that is co-doped with six equally branched star morphologies. The Co-C composite has the same six-branched morphology as that of the precursor. When the EM wave is incident, this special structure makes it easier for the EM wave to enter the material vertically due to the expansion of the incident surface, which is effective in adjusting the transmission path of the electron and the reflection and distribution of the EM wave. Because of the special morphology and magneto-dielectric synergy, the Co-C composite shows a minimum reflection loss (RLmin) of -48.5 dB at 11.0 GHz at an absorption thickness of 3.0 mm, with a microwave absorption bandwidth (EAB) of 6.1 GHz. This research provides a practical guidance for preparing the MAMs of special star structure.

Efficient Electromagnetic Wave Absorption and Thermal Infrared Stealth in PVTMS@MWCNT Nano-Aerogel via Abundant Nano-Sized Cavities and Attenuation Interfaces

Pre-polymerized vinyl trimethoxy silane (PVTMS)@MWCNT nano-aerogel system was constructed via radical polymerization, sol-gel transition and supercritical CO2 drying. The fabricated organic-inorganic hybrid PVTMS@MWCNT aerogel structure shows nano-pore size (30-40 nm), high specific surface area (559 m2 g-1), high void fraction (91.7%) and enhanced mechanical property: (1) the nano-pore size is beneficial for efficiently blocking thermal conduction and thermal convection via Knudsen effect (beneficial for infrared (IR) stealth); (2) the heterogeneous interface was beneficial for IR reflection (beneficial for IR stealth) and MWCNT polarization loss (beneficial for electromagnetic wave (EMW) attenuation); (3) the high void fraction was beneficial for enhancing thermal insulation (beneficial for IR stealth) and EMW impedance match (beneficial for EMW attenuation). Guided by the above theoretical design strategy, PVTMS@MWCNT nano-aerogel shows superior EMW absorption property (cover all Ku-band) and thermal IR stealth property (ΔT reached 60.7 °C). Followed by a facial combination of the above nano-aerogel with graphene film of high electrical conductivity, an extremely high electromagnetic interference shielding material (66.5 dB, 2.06 mm thickness) with superior absorption performance of an average absorption-to-reflection (A/R) coefficient ratio of 25.4 and a low reflection bandwidth of 4.1 GHz (A/R ratio more than 10) was experimentally obtained in this work.

Nitrogen-Doped Magnetic-Dielectric-Carbon Aerogel for High-Efficiency Electromagnetic Wave Absorption

Carbon-based aerogels derived from biomass chitosan are encountering a flourishing moment in electromagnetic protection on account of lightweight, controllable fabrication and versatility. Nevertheless, developing a facile construction method of component design with carbon-based aerogels for high-efficiency electromagnetic wave absorption (EWA) materials with a broad effective absorption bandwidth (EAB) and strong absorption yet hits some snags. Herein, the nitrogen-doped magnetic-dielectric-carbon aerogel was obtained via ice template method followed by carbonization treatment, homogeneous and abundant nickel (Ni) and manganese oxide (MnO) particles in situ grew on the carbon aerogels. Thanks to the optimization of impedance matching of dielectric/magnetic components to carbon aerogels, the nitrogen-doped magnetic-dielectric-carbon aerogel (Ni/MnO-CA) suggests a praiseworthy EWA performance, with an ultra-wide EAB of 7.36 GHz and a minimum reflection loss (RLmin) of - 64.09 dB, while achieving a specific reflection loss of - 253.32 dB mm-1. Furthermore, the aerogel reveals excellent radar stealth, infrared stealth, and thermal management capabilities. Hence, the high-performance, easy fabricated and multifunctional nickel/manganese oxide/carbon aerogels have broad application aspects for electromagnetic protection, electronic devices and aerospace.

High-performance composite elastomers with abundant heterostructures for enhanced electromagnetic wave absorption with ultrabroad bandwidth

Two-dimensional (2D) MXene has attracted vast attention in electromagnetic wave absorption (EWA), but there remains a contradiction between maintaining impedance matching and enhancing dielectric loss. Herein, the multi-scale architectures of ecoflex/2D MXene (Ti3C2Tx)@zero-dimensional CoNi sphere@one-dimensional carbon nanotube composite elastomers were successfully constructed by simple liquid-phase reduction and thermo-curing method. The binding between the hybrids as fillers and ecoflex as a matrix greatly enhanced the EWA capability of the obtained composite elastomer and improved its mechanical properties. Owing to its good impedance matching, abundant heterostructures, and synergistic electrical and magnetic losses, this elastomer exhibited an excellent minimum reflection loss of -67 dB at 9.46 GHz under a thickness of 2.98 mm. In addition, its ultrabroad effective absorption bandwidth reached 6.07 GHz. This achievement will pave the way for the exploitation of multi-dimensional heterostructures as high-performance electromagnetic absorbers with superior EWA ability.

Carbon-Based Radar Absorbing Materials toward Stealth Technologies

Stealth technology is used to enhance the survival of military equipment in the field of military surveillance, as it utilizes a combination of techniques to render itself undetectable by enemy radar systems. Radar absorbing materials (RAMs) are specialized materials used to reduce the reflection (or absorption) of radar signals to provide stealth capability, which is a core component of passive countermeasures in military applications. The properties of RAMs can be optimized by adjusting their composition, microstructure, and surface geometry. Carbon-based materials present a promising approach for the fabrication of ultrathin, versatile, and high-performance RAMs due to their large specific surface area, lightweight, excellent dielectric properties, high electrical conductivity, and stability under harsh conditions. This review begins with a brief history of stealth technology and an introduction to electromagnetic waves, radar systems, and radar absorbing materials. This is followed by a discussion of recent research progress in carbon-based RAMs, including carbon blacks, carbon fibers, carbon nanotubes, graphite, graphene, and MXene, along with an in-depth examination of the principles and strategies on electromagnetic attenuation characteristics. Hope this review will offer fresh perspectives on the design and fabrication of carbon-based RAMs, thereby fostering a deeper fundamental understanding and promoting practical applications.

Scalable Production of Catecholamine-Densified MXene Coatings for Electromagnetic Shielding and Infrared Stealth

Processing transition metal carbides/nitrides (MXenes) inks into large-area functional coatings expects promising potential for electromagnetic interference (EMI) shielding and infrared stealth. However, the coating performances, especially for scalable fabrication techniques, are greatly constrained by the flake size and stacking manner of MXene. Herein, the large-area production of highly densified and oriented MXene coatings is demonstrated by engineering interfacial interactions of small MXene flakes with catecholamine molecules. The catecholamine molecules can micro-crosslink MXene nanosheets, significantly improving the ink's rheological properties. It favors the shear-induced sheet arrangement and inhibition of structural defects in the blade coating process, making it possible to achieve high orientation and densification of MXene assembly by either large-area coating or patterned printing. Interestingly, the MXene/catecholamine coating exhibits high conductivity of up to 12 247 S cm-1 and ultrahigh specific EMI shielding effectiveness of 2.0 ×10 5  dB cm2 g-1 , obviously superior to most of the reported MXene materials. Furthermore, the regularly assembled structure also endows the MXene coatings with low infrared emissivities for infrared stealth applications. Therefore, MXene/catecholamine coatings with ultraefficient EMI shielding and low infrared emissivity prove the feasibility of applications in aerospace, military, and wearable devices.

Multi-interfacial engineering in the hierarchical self-assembled micro-nano dielectric aerogel for wide-band absorption and low infrared emissivity

Radar-infrared (IR) compatible stealth can satisfy the characteristics of excellent electromagnetic wave attenuation property and low infrared emissivity. However, concurrently satisfying these demands is still a great challenge at present. Herein, multi-interfacial engineering strategy was proposed for the preparation of radar-IR compatible stealth materials. ZnO has a high electron binding energy and a large band gap at room temperature, and doping with sulphide can increase the concentration of unconstrained carriers. Therefore, bimetallic sulphide aerogels loaded with ZnO were prepared by means of carbonization and vulcanization, combined with freeze-drying method. When the filling ratio is 20 %, an absorption bandwidth (fe) of 6.62 GHz at a matching thickness of 2.0 mm and a reduction in IR emissivity from 0.920 to 0.539 in the 8-14 μm band are achieved. This work provides a guidance to design and synthesize high-performance absorbers by multi-interfacial engineering for IR-radar compatible stealth application.

Electronic Modulation Strategy for Mass-Producible Ultrastrong Multifunctional Biomass-Based Fiber Aerogel Devices: Interfacial Bridging

The emergence of green flexible aerogel electronics based on natural materials is expected to solve part of the global environmental and energy crisis. However, it is still challenging to achieve large-scale production and multifunctional stable applications of natural biomass fiber aerogel (BFA) materials. Herein, we exploit the interfacial bridging between the flower-type titanium dioxide nanoarray (FTNA) and natural fiber substrates to modulate the electronic structure and loss mechanism to achieve multifunctional properties. Specifically, the fibrous substrate with wrinkled features induces lattice strain in titania through precise interfacial bridging, effectively improving the intrinsic properties of the BFA materials. This interfacial bridging regulation strategy is also confirmed by X-ray absorption fine structure spectroscopy (XAS). More importantly, the construction of BFA products for different macroscopic and multifunctional applications through simple processing methods will facilitate the transition from natural materials to multifunctional flexible electronics. Therefore, the as-prepared blanket-type BFA (TCBFA) has good mechanical properties, electromagnetic protection properties, thermal stealth properties, high-temperature flame retardancy, and UV resistance. Meanwhile, the membrane-type (TCBFAM) multifunctional wearable fiber aerogel device exhibits superior flexibility, efficient Joule heating performance, and a smart response. This regulation strategy provides another concept for the design and innovation of green multifunctional fiber-integrated aerogels.

Nanolayered Ceramic-Confined Graphene Aerogel with Conformal Heterointerfaces for Low-Frequency Microwave Absorption

Graphene-based aerogels have garnered considerable attention for their lightweight and efficient microwave absorption (MA) properties; however, optimizing the relationship between impedance matching and attenuation capability at low frequencies remains a challenge. In this study, a three-dimensional (3D) silicon carbonitride (SiCN) nanoceramic-coated graphene aerogel with conformal heterogeneous interfaces is constructed by precursor infiltration and pyrolysis to optimize MA performance at low frequencies. Thanks to the enhanced impedance matching and significant interfacial polarization of the two-dimensional sandwiched SiCN/graphene/SiCN cell walls and multiple scattering occurring within the 3D porous skeleton, the aerogel achieves a minimum reflection loss of -57.9 dB at an ultralow frequency of 4.92 GHz (C-band) and a broad bandwidth of 5.0 GHz at an ultralow thickness of 1.7 mm. The strategy developed here provides a method for enhancing dielectric polarization loss in graphene aerogels by the joint optimization of interfacial polarization and impedance matching, inspiring the design of high-performance graphene-based materials for low-frequency MA.

Customizable Resilient Multifunctional Graphene Aerogels via Blend-spinning assisted Freeze Casting

Graphene aerogels have gained considerable attention due to their unique physical properties, but their poor mechanical properties and lack of functionality have hindered their advanced applications. In this study, we propose a blend-spinning-assisted freeze-casting (BSFC) strategy to incorporate particle-modified carbon fibers into graphene aerogels for mechanical strengthening and functional enhancement. This method offers a great deal of freedom in the creation of customizable multimaterial, multiscale structural graphene aerogels. For example, we fabricated silicon carbide particle modified carbon fiber reinforced graphene (SiC/CF-GA) aerogels. The resulting aerogels display excellent properties such as being ultralightweight and highly resilient and having fatigue compression resistance (1000 cycles at 50% strain). Meanwhile, enhanced resilience inspired the effective strain-sensing capabilities of SiC/CF-GA aerogels with a sensitivity of 13.8 kPa-1. The adjustable dielectric properties due to SiC particle incorporation endow the SiC/CF-GA aerogel with a broad-band (8.0 GHz) effective electromagnetic wave attenuation performance. Besides, different particles could be incorporated into graphene aerogels via the BSFC strategy, allowing for customizable designs. Moreover, multifunctionalities were demonstrated by the modified aerogels, including noise absorption, thermal insulation, fire resistance, and waterproofing, further diversifying their practicality. Hence, the BSFC strategy provides a customized solution for fabricating modified graphene aerogels for advanced functional applications.

Multifunctional MXene/C Aerogels for Enhanced Microwave Absorption and Thermal Insulation

Two-dimensional transition metal carbides and nitrides (MXene) have emerged as promising candidates for microwave absorption (MA) materials. However, they also have some drawbacks, such as poor impedance matching, high self-stacking tendency, and high density. To tackle these challenges, MXene nanosheets were incorporated into polyacrylonitrile (PAN) nanofibers and subsequently assembled into a three-dimensional (3D) network structure through PAN carbonization, yielding MXene/C aerogels. The 3D network effectively extends the path of microcurrent transmission, leading to enhanced conductive loss of electromagnetic (EM) waves. Moreover, the aerogel's rich pore structure significantly improves the impedance matching while effectively reducing the density of the MXene-based absorbers. EM parameter analysis shows that the MXene/C aerogels exhibit a minimum reflection loss (RLmin) value of - 53.02 dB (f = 4.44 GHz, t = 3.8 mm), and an effective absorption bandwidth (EAB) of 5.3 GHz (t = 2.4 mm, 7.44-12.72 GHz). Radar cross-sectional (RCS) simulations were employed to assess the radar stealth effect of the aerogels, revealing that the maximum RCS reduction value of the perfect electric conductor covered by the MXene/C aerogel reaches 12.02 dB m2. In addition to the MA performance, the MXene/C aerogel also demonstrates good thermal insulation performance, and a 5-mm-thick aerogel can generate a temperature gradient of over 30 °C at 82 °C. This study provides a feasible design approach for creating lightweight, efficient, and multifunctional MXene-based MA materials.

Review of Polymer-Based Composites for Electromagnetic Shielding Application

The rapid advancement of electronic communication technology has greatly aided human productivity and quality of life, but it has also resulted in significant electromagnetic pollution issues. Traditional metals and alloys are often used for electromagnetic interference (EMI) shielding due to their excellent electrical conductivity. However, they have drawbacks such as being heavy, expensive, and having low corrosion resistance, which limits their application in electromagnetic shielding. Therefore, it is crucial to develop novel EMI shielding materials. Polymers, being highly flexible, corrosion-resistant, and possessing high specific strength, are frequently employed in electromagnetic shielding materials. In this review, we firstly introduce the basic theory of electromagnetic shielding. Then, we outline the processing methods and recent developments of polymer-based electromagnetic shielding composites, including uniform-, foam-, layered-, and segregated structures. Lastly, we present the challenges and prospects for the field, aiming to provide direction and inspiration for the study of polymer-based electromagnetic shielding composite materials.

Microwave absorbing characteristics of porphyrin derivates: a loop of conjugated structure

Microwave absorbing architectures have gained a great deal of attention due to their widespread application in diverse fields, especially in refining electromagnetic pollution. The aim of this study is to investigate the metamaterial characteristics of porphyrin derivatives as conjugated rings in the microwave region and evaluate the influence of electron-withdrawing and donating groups on microwave attenuating performance. Initially, an innovative microwave curing procedure was applied to synthesize the derivates; following that, the phenyl, aniline, and nitrophenyl-coupled structures were identified by XRD, FTIR, FESEM, and DRS analyses. The optical features illustrated that the characteristic band gap of the conjugated loops is obtained and that the optical performance can be manipulated by coupling the functional groups. Eventually, the achieved results demonstrated that the best microwave absorbing performance is related to aniline-coupled porphyrin with a maximum reflection loss (RL) value of -104.93 dB at 10.09 GHz with 2.80 mm in thickness attaining an efficient bandwidth (EB) (RL ≤ 10 dB) higher than the X-band. Noticeably, polyethylene (PE) was applied as an absorbing matrix presenting a meaningful idea for the development of practical microwave absorbers as a new generation of electromagnetic refining and stealth materials. The presented research provides precious inspiration to tailor novel microwave absorbing materials with metamaterial capability to promote their microwave absorbing performance.

"Three-in-One" Multi-Scale Structural Design of Carbon Fiber-Based Composites for Personal Electromagnetic Protection and Thermal Management

Wearable devices with efficient thermal management and electromagnetic interference (EMI) shielding are highly desirable for improving human comfort and safety. Herein, a multifunctional wearable carbon fibers (CF) @ polyaniline (PANI) / silver nanowires (Ag NWs) composites with a "branch-trunk" interlocked micro/nanostructure were achieved through "three-in-one" multi-scale design. The reasonable assembly of the three kinds of one-dimensional (1D) materials can fully exert their excellent properties i.e., the superior flexibility of CF, the robustness of PANI, and the splendid conductivity of AgNWs. Consequently, the constructed flexible composite demonstrates enhanced mechanical properties with a tensile stress of 1.2 MPa, which was almost 6 times that of the original material. This is mainly attributed to the fact that the PNAI (branch) was firmly attached to the CF (trunk) through polydopamine (PDA), forming a robust interlocked structure. Meanwhile, the composite possesses excellent thermal insulation and heat preservation capacity owing to the synergistically low thermal conductivity and emissivity. More importantly, the conductive path of the composite established by the three 1D materials greatly improved its EMI shielding property and Joule heating performance at low applied voltage. This work paves the way for rational utilization of the intrinsic properties of 1D materials, as well as provides a promising strategy for designing wearable electromagnetic protection and thermal energy management devices.

An Adaptive Multispectral Mechano-Optical System for Multipurpose Applications

Mechano-optical systems with on-demand adaptability and a broad spectrum from the visible to microwave are critical for complex multiband electromagnetic (EM) applications. Most existing material systems merely have dynamic optical or microwave tunability because their EM wave response is strongly wavelength-dependent. Inspired by cephalopod skin, we develop an adaptive multispectral mechano-optical system based on bilayer acrylic dielectric elastomer (ADE)/silver nanowire (AgNW) films, which reconfigures the surface morphology between wrinkles and cracks via mechanical contraction and stretching. Such morphological evolution regulates the direct transmission/reflection and scattering behavior of visible-infrared light and simultaneously alters the conductive network in a AgNW film to influence its microwave characteristics. The designed system features switching between visible-infrared-microwave transparency and opacity, continuous regulation, wide spectral window (0.38-15.5 μm and 24,200-36,600 μm), excellent recyclability (500 times), and rapid response time (<1 s). These grant the system great potential as platforms for various promising applications such as smart windows, switchable EM devices, dynamic thermal management, adaptive visual stealth, and human motion detection.

Construction of Hollow Carbon Nanofibers with Graphene Nanorods as Nano-Antennas for Lower-Frequency Microwave Absorption

Electromagnetic (EM) wave absorbers at a lower-frequency region (2-8 GHz) require higher attenuation ability to achieve efficient absorption. However, the impedance match condition and attenuation ability are usually inversely related. Herein, one-dimensional hollow carbon nanofibers with graphene nanorods are prepared based on coaxial electrospinning technology. The morphology of graphene nanorods can be controlled by the annealing process. As the annealing time increased from 2 to 8 h, graphene nanospheres grew into graphene nanorods, which were catalyzed by Co catalysts derived from ZIF-67 nanoparticles. These nanorods can play the role of nano-antennas, which can guide EM waves into materials to enhance impedance match conditions. As a result, the carbon nanofibers with graphene nanorods possess a larger impedance match area with higher attenuation ability. The minimum reflection loss reaches -57.1 dB at a thickness of 4.6 mm, and the effective absorption bandwidth can cover almost both the S and C bands (2.4-8 GHz). This work contributes a meaningful perspective into the modulation of microwave absorption performance in the lower-frequency range.

Synthesis of hollow CuFe2O4 microspheres decorated nitrogen-doped graphene hybrid composites for broadband and efficient electromagnetic absorption

The development of graphene-based electromagnetic wave (EMW) absorbers with broad bandwidth, strong absorption and low filling ratio remains a big challenge. In this work, hollow copper ferrite microspheres decorated nitrogen-doped reduced graphene oxide (NRGO/hollow CuFe₂O₄) hybrid composites were prepared by a two-step route of solvothermal reaction and hydrothermal synthesis. Results of microscopic morphology analysis showed that the NRGO/hollow CuFe₂O₄ hybrid composites had a special entanglement structure between hollow CuFe₂O₄ microspheres and wrinkled NRGO. Moreover, the EMW absorption properties of as-prepared hybrid composites could be regulated by changing the additive amounts of hollow CuFe₂O₄. It was worth noting that when the additive amount of hollow CuFe₂O₄ was 15.0 mg, the attained hybrid composites showed the optimal EMW absorption performance. The minimum reflection loss reached up to -34.18 dB at a thin matching thickness of 1.98 mm and a low filling ratio of 20.0 wt%, and the corresponding effective absorption bandwidth was as large as 5.92 GHz, covering almost the whole Ku band. Furthermore, when the matching thickness was increased to 3.02 mm, the EMW absorption capacity was significantly enhanced, and the optimal reflection loss value of -58.45 dB was achieved. In addition, the possible EMW absorption mechanisms were proposed. Therefore, the structural design and composition regulation strategy presented in this work would provide a great reference value for the preparation of broadband and efficient graphene-based EMW absorbing materials.

Ordered Heterostructured Aerogel with Broadband Electromagnetic Wave Absorption Based on Mesoscopic Magnetic Superposition Enhancement

Demand for lightweight and efficient electromagnetic wave (EW) absorbers continues to increase with technological advances in highly integrated electronics and military applications. Although MXene-based EW absorbers have been extensively developed, more efficient electromagnetic coupling and thinner thickness are still essential. Recently, ordered heterogeneous materials have emerged as a novel design concept to address the bottleneck faced by current material development. Herein, an ordered heterostructured engineering to assemble Ti₃ CNT_x MXenes/Aramid nanofibers/FeCo@SiO₂ nanobundles (FS) aerogel (AMFS-O) is proposed, where the commonly disordered magnetic composition is transformed to ordered FS arrays that provide more powerful magnetic loss capacity. Experiments and simulations reveal that the anisotropy magnetic networks enhance the response to the magnetic field vector of EW, which effectively improves the impedance matching and makes the reflection loss (RL) peaks shift to lower frequencies, leading to the thinner matching thickness. Furthermore, the temperature stability and excellent compressibility of AMFS-O expand functionalized applications. The synthesized AMFS-O achieves full-wave absorption in X and Ku-band (8.2-18.0 GHz) at 3.0 mm with a RL_min of -41 dB and a low density of 0.008 g cm^-3 . These results suggest that ordered heterostructured engineering is an effective strategy for designing high-performance multifunctional EW absorbers.

Synthesis of a one-dimensional carbon nanotube-decorated three-dimensional crucifix carbon architecture embedded with Co7Fe3/Co5.47N nanoparticles for high-performance microwave absorption

Low-dimensional cell-decorated three-dimensional (3D) hierarchical structures are considered excellent candidates for achieving remarkable microwave absorption. In the present work, a one-dimensional (1D) carbon nanotube (CNT)-decorated 3D crucifix carbon framework embedded with Co₇Fe₃/Co_5.47N nanoparticles (NPs) was fabricated by the in-situ pyrolysis of a trimetallic metal-organic framework (MOF) precursor (ZIF-ZnFeCo). Co₇Fe₃/Co_5.47N NPs were uniformly dispersed on the carbon matrix. The 1D CNT nanostructure was well regulated on the 3D crucifix surface by changing the pyrolysis temperature. The synergistic effect of 1D CNT and the 3D crucifix carbon framework increased the conductive loss, and Co₇Fe₃/Co_5.47N NPs induced interfacial polarization and magnetic loss; thus, the composite manifested superior microwave absorption performance. The optimum absorption intensity was -54.0 dB, and the effective absorption frequency bandwidth reached 5.4 GHz at a thickness of 1.65 mm. The findings of this work could provide significant guidance for the fabrication of MOF-derived hybrids for high-performance microwave absorption applications.

Rational design of heterointerface between MoO2 and N-doped carbon with tunable electromagnetic interference shielding capacity

Exploring highly efficient electromagnetic interference (EMI) shielding filler is urgently desired for next-generation wireless communication and integrated electronics. In this regard, a series of heterogeneous MoO₂/N-doped carbon (MoO₂/NC) nanorods with tunable conductivity have been successfully synthesized by regulating the pyrolysis temperature within 600, 700 and 800 °C. Profiting from the rational design of heterointerface and low-dimensional structure, the MoO₂/NC powder achieves stronger EMI shielding capacity with the incremental temperature. It is found that the MoO₂/NC-800 nanorods exhibit the optimal average EMI shielding effectiveness (SE) of 57.2 dB at a thickness of ∼0.3 mm in the X band. Meanwhile, the corresponding shielding mechanisms of MoO₂/NC nanorods are also elaborately explained. More interestingly, the increase of sintering temperature makes an obvious effect on absorption loss but has little influence on reflection loss, demonstrating that adjusting the pyrolysis temperature is an effective strategy to strengthen the electromagnetic energy dissipation.

Construction and application of carbon aerogels in microwave absorption

Electromagnetic pollution that threatens human health, the ecological environment and electronic equipment has been recognized as a serious environmental issue. In view of this, microwave absorbing materials (MAMs) are urgently required in modern society. Compared with traditional MAMs, carbon aerogels have inherent advantages in microwave absorption because of their high porosity and controllable conductive networks. Moreover, they are self-supporting 3D architectures with tailorable shapes, which satisfy most application scenarios. Therefore, carbon aerogels have aroused great interest in recent years and are being developed as promising absorption materials. In this review, we emphasize recent developments in carbon-aerogel-based MAMs constructed with some typical carbon nanomaterials, including graphene, carbon nanotubes and pyrolytic carbon. Their preparation methods, especially some newly developed strategies, are introduced as well as their influence on the structures and properties of aerogels. With a brief analysis of classic microwave absorption processes, we propose the requirements and strategies for modifying carbon aerogels to achieve ideal microwave absorption performance. Finally, we provide comprehensive comparisons of the MA performances of various carbon aerogels that show application potential and set forth the challenges and prospects of this kind of MAM.

A Novel Ultra-Wideband Electromagnetic-Wave-Absorbing Metastructure Inspired by Bionic Gyroid Structures

Traditional honeycomb-like structural electromagnetic (EM)-wave-absorbing materials have been widely used in various equipment as multifunctional materials. However, current EM-wave-absorbing materials are limited by narrow absorption bandwidths and incidence angles because of their anisotropic structural morphology. The work presented here proposes a novel EM-wave-absorbing metastructure with an isotropic morphology inspired by the gyroid microstructures seen in Parides sesostris butterfly wings. A matching redesign methodology between the material and subwavelength scale properties of the gyroid microstructure is proposed, inspired by the interaction mechanism between the microstructure and the material properties on the EM-wave-absorption performance of the prepared metastructure. The bioinspired metastructure is fabricated by additive manufacturing (AM) and subsequent coating through dipping processes, filled with dielectric lossy materials. Based on simulations and experiments, the metastructure designed in this work exhibits an ultrawide absorption bandwidth covering the frequency range of 2-40 GHz with a fractional bandwidth of 180% at normal incidence. Moreover, the metastructure has a stable frequency response when the incident angle is 60° under transverse electric (TE) and transverse magnetic (TM) polarization. Finally, the synergistic mechanism between the microstructure and the material is elucidated, which provides a new paradigm for the design of novel ultra-broadband EM-absorbing materials.

Combinatorial Structural Engineering of Multichannel Hierarchical Hollow Microspheres Assembled from Centripetal Fe/C Nanosheets to Achieve Effective Integration of Sound Absorption and Microwave Absorption

Electromagnetic radiation and noise pollution are two of the four major environmental pollution sources. Although various materials with excellent microwave absorption performances or sound absorption properties have been manufactured, it is still a great challenge to design materials with both microwave absorption and sound absorption abilities due to different energy consumption mechanisms. Herein, a combination strategy based on structural engineering was proposed to develop bi-functional hierarchical Fe/C hollow microspheres composed of centripetal Fe/C nanosheets. Both of the interconnected channels created by multiple gaps among the adjacent Fe/C nanosheets and the hollow structure have positive effects on the absorbing performances by promoting the penetration of microwaves and acoustic waves and prolonging action time between microwave energy and acoustic energy with materials. In addition, a polymer-protection strategy and a high-temperature reduction process were applied to keep this unique morphology and further improve the performances of the composite. As a result, the optimized hierarchical Fe/C-500 hollow composite exhibits a wide effective absorption bandwidth of 7.52 GHz (10.48-18.00 GHz) at only 1.75 mm. Furthermore, the Fe/C-500 composite can effectively absorb sound wave in the frequency of 1209-3307 Hz, basically including part of the low frequency range (<2000 Hz) and most of the medium frequency range (2000-3500 Hz), and has 90% absorption of sound at 1721-1962 Hz. This work puts new insight into the engineering and development of microwave absorption-sound absorption-integrated functional materials with promising applications.

High-Entropy Enhanced Microwave Attenuation in Titanate Perovskites

High-entropy oxides (HEOs), which incorporate multiple-principal cations into single-phase crystals and interact with diverse metal ions, extend the border for available compositions and unprecedented properties. Herein, a high-entropy-stabilized (Ca_0.2 Sr_0.2 Ba_0.2 La_0.2 Pb_0.2 )TiO₃  perovskite is reported, and the effective absorption bandwidth (90% absorption) improves almost two times than that of BaTiO₃ . The results demonstrate that the regulation of entropy configuration can yield significant grain boundaries, oxygen defects, and an ultradense distorted lattice. These characteristics give rise to strong interfacial and defect-induced polarizations, thus synergistically contributing to the dielectric attenuation performance. Moreover, the large strains derived from the strong lattice distortions in the high-entropy perovskite offer varied transport for electron carriers. The high-entropy-enhanced positive/negative charges accumulation around grain boundaries and strain-concentrated location, quantitatively validated by electron holography, results in unusual dielectric polarization loss. This study opens up an effective avenue for designing strong microwave absorption materials to satisfy the increasingly demanding requirements of advanced and integrated electronics. This work also offers a paradigm for improving other interesting properties for HEOs through entropy engineering.

Bioinspired Carbon Superstructures for Efficient Electromagnetic Shielding

Biologically inspired superstructural materials exhibit wide application prospects in many fields, in terms of mitigating increasingly serious electromagnetic (EM) pollution in the civil field. Here, we successfully obtain bamboo slices with uniform pore size distribution through the advanced bamboo transverse splitting technology developed by our group previously and prepare large-scale honeycomb-like carbon-based tubular array (CTA) structures with a controllable pore size, graphitization degree, and selectable conductivity property. Based on the simulation and experimental results, the EM shielding performance of CTAs is proven to be sensitive to the microchannel aperture size and the EM energy incident angle, which is attributed to the difference in the propagation rate of induced electrons in different directions. Among the candidates, CTA-middle-1500 exhibits the best shielding performance against incident EM energy with average SE/ρ values of 123.7 and 144.5 dB cm³ g^-1 for perpendicular and parallel directions, respectively, showing its application potential as a lightweight and efficient EM shielding material. The predicted optimal incident angle for CTA-middle-1500 against EM energy radiation is 15°, with the largest RCS reduction value of 26.1 dB m². The excellent EM shielding performance is attributed to the good reflection capacity involved with the high conductivities of the CTAs.

Green, Sustainable Architectural Bamboo with High Light Transmission and Excellent Electromagnetic Shielding as a Candidate for Energy-Saving Buildings

Currently, light-transmitting, energy-saving, and electromagnetic shielding materials are essential for reducing indoor energy consumption and improving the electromagnetic environment. Here, we developed a cellulose composite with excellent optical transmittance that retained the natural shape and fiber structure of bamboo. The modified whole bamboo possessed an impressive optical transmittance of approximately 60% at 6.23 mm, illuminance of 1000 luminance (lux), water absorption stability (mass change rate less than 4%), longitudinal tensile strength (46.40 MPa), and surface properties (80.2 HD). These were attributed to not only the retention of the natural circular hollow structure of the bamboo rod on the macro, but also the complete bamboo fiber skeleton template impregnated with UV resin on the micro. Moreover, a multilayered device consisting of translucent whole bamboo, transparent bamboo sheets, and electromagnetic shielding film exhibited remarkable heat insulation and heat preservation performance as well as an electromagnetic shielding performance of 46.3 dB. The impressive optical transmittance, mechanical properties, thermal performance, and electromagnetic shielding abilities combined with the renewable and sustainable nature, as well as the fast and efficient manufacturing process, make this bamboo composite material suitable for effective application in transparent, energy-saving, and electromagnetic shielding buildings.

Broadband and High-Efficiency Microwave Absorbers Based on Pyramid Structure

Microwave-absorbing materials with wide bandwidth and high absorptivity are increasingly playing an important role in over-the-air (OTA) testing. In this work, a kind of pyramid absorbing material was prepared using flame-retardant absorbers as the filler. In addition, a coating was used to further improve the flame-retardant properties of the microwave-absorbing material. To obtain excellent microwave absorption performance (MWAP), a high-frequency structure simulator (HFSS) was adopted to design structural materials. Here, the total height, the base height, the decapitation height of the pyramid tip, the distance between the pyramids, and other parameters were analyzed; then, the actual processing and molding were realized. The MWAP of -30 dB was achieved at 2.7-18 GHz, and the MWAP of -10 dB was also met at 2-18 GHz. In particular, the study also investigated the MWAP of large angle, which can meet the MWAP of -10 dB at 2-18 GHz and MWAP of -30 dB at 4-18 GHz. Most importantly, the absorption mechanism of the pyramid structure was explored. The influence of the tip was proved by the distribution of the electromagnetic field in the pyramid. It can be regarded as a multilayer microwave-absorbing material due to the impedance gradient of the pyramid, which can provide an effective research idea and method for future engineering applications.