Atomic-Level Interface Engineering for Boosting Oxygen Electrocatalysis Performance of Single-Atom Catalysts: From Metal Active Center to the First Coordination Sphere

Hetero-Diatomic CoN4-NiN4 Site Pairs with Long-Range Coupling as Efficient Bifunctional Catalyst for Rechargeable Zn-Air Batteries

In this study, Co/Ni-NC catalyst with hetero-diatomic Co/Ni active sites dispersed on nitrogen-doped carbon matrix is synthesized via the controlled pyrolysis of ZIF-8 containing Co2+ and Ni2+ compounds. Experimental characterizations and theoretical calculations reveal that Co and Ni are atomically and uniformly dispersed in pairs of CoN4-NiN4 with an intersite distance ≈0.41 nm, and there is long-range d-d coupling between Co and Ni with more electron delocalization for higher bifunctional activity. Besides, the in situ grown carbon nanotubes at the edges of the catalyst particles allow high electronic conductivity for electrocatalysis process. Electrochemical evaluations demonstrate the superior ORR and OER bifunctionality of Co/Ni-NC catalyst with a narrow potential gap of only 0.691 V and long-term durability, significantly prevailing over the single-atom Co-NC and Ni-NC catalysts and the benchmark Pt/C and RuO2 catalysts. Co/Ni-NC catalyzed Zn-air batteries achieve a high specific capacity of 771 mAh g-1 and a long continuous operation period up to 340 h with a small voltage gap of ≈0.65 V, also much superior to Pt/C-RuO2.

Single-Atom Co─O4 Sites Embedded in a Defective-Rich Porous Carbon Layer for Efficient H2O2 Electrosynthesis

The production of hydrogen peroxide (H2O2) via the two-electron electrochemical oxygen reduction reaction (2e- ORR) is an essential alteration in the current anthraquinone-based method. Herein, a single-atom Co─O4 electrocatalyst is embedded in a defective and porous graphene-like carbon layer (Co─O4@PC). The Co─O4@PC electrocatalyst shows promising potential in H2O2 electrosynthesis via 2e- ORR, providing a high H2O2 selectivity of 98.8% at 0.6 V and a low onset potential of 0.73 V for generating H2O2. In situ surface-sensitive attenuated total reflection Fourier transform infrared spectra and density functional theory calculations reveal that the electronic and geometric modification of Co─O4 induced by defective carbon sites result in decreased d-band center of Co atoms, providing the optimum adsorption energies of OOH* intermediate. The H-cell and flow cell assembled using Co─O4@PC as the cathode present long-term stability and high efficiency for H2O2 production. Particularly, a high H2O2 production rate of 0.25 mol g-1 cat h-1 at 0.6 V can be obtained by the flow cell. The in situ-generated H2O2 can promote the degradation of rhodamine B and sterilize Staphylococcus aureus via the Fenton process. This work can pave the way for the efficient production of H2O2 by using Co─O4 single atom electrocatalyst and unveil the electrocatalytic mechanism.

Atomic Molybdenum Nanomaterials for Electrocatalysis

As a sustainable energy technology, electrocatalytic energy conversion requires electrocatalysts, which greatly motivates the exploitation of high-performance electrocatalysts based on nonprecious metals. Molybdenum-based nanomaterials have demonstrated promise as electrocatalysts because of their unique physiochemical and electronic properties. Among them, atomic Mo catalysts, also called Mo-based single-atom catalysts (Mo-SACs), have the most accessible active sites and tunable microenvironments and are thrivingly explored in various electrochemical conversion reactions. A timely review of such rapidly developing topics is necessary to provide guidance for further exploration of optimized Mo-SACs toward electrochemical energy technologies. In this review, recent advances in the synthetic strategies for Mo-SACs are highlighted, focusing on the microenvironment engineering of Mo atoms. Then, the representative achievements of their applications in various electrocatalytic reactions involving the N2, H2O, and CO2 cycles are summarized by combining experimental and computational results. Finally, prospects for the future development of Mo-SACs in electrocatalysis are provided and the key challenges that require further investigation and optimization are highlighted.

Strategies Toward High Selectivity, Activity, and Stability of Single-Atom Catalysts

Single-atom catalysts (SACs) hold immense promise in facilitating the rational use of metal resources and achieving atomic economy due to their exceptional atom-utilization efficiency and distinct characteristics. Despite the growing interest in SACs, only limited reviews have holistically summarized their advancements centering on performance metrics. In this review, first, a thorough overview on the research progress in SACs is presented from a performance perspective and the strategies, advancements, and intriguing approaches employed to enhance the critical attributes in SACs are discussed. Subsequently, a comprehensive summary and critical analysis of the electrochemical applications of SACs are provided, with a particular focus on their efficacy in the oxygen reduction reaction , oxygen evolution reaction, hydrogen evolution reaction , CO2 reduction reaction, and N2 reduction reaction . Finally, the outline future research directions on SACs by concentrating on performance-driven investigation, where potential areas for improvement are identified and promising avenues for further study are highlighted, addressing challenges to unlock the full potential of SACs as high-performance catalysts.

Coordination polymer derived Fe-N-C electrocatalysts with high performance for the oxygen reduction reaction in Zn-air batteries

Developing high performance noble-metal-free electrocatalysts as an alternative to Pt-based catalysts for the oxygen reduction reaction (ORR) in energy conversion devices is highly desirable. We report herein the preparation of a coordination-polymer (CP)-derived Fe/CP/C composite as an electrocatalyst for the ORR with excellent activity and stability both in solution and in Zn-air batteries. The Fe/CP/C catalyst was obtained from the pyrolysis of an iron porphyrin Fe(TPP)Cl (5,10,15,20-tetraphenyl-21H,23H-porphyrin iron(III) chloride) grafted Zn-coordination polymer with dangling functional groups 4,4'-oxybisbenzoic acid and 4,4'-bipyridine ligands. The Fe/CP/C catalyst showed much higher ORR activity with a half-wave potential (E1/2) of 0.90 V (vs. RHE) than the Fe/C catalyst (E1/2 = 0.85 V) derived from the carbon-black-supported Fe porphyrins in 0.1 M KOH solution. When Fe/CP/C was used as the cathode electrocatalyst in Zn-air batteries (ZABs), the ZABs achieved a significantly higher open circuit voltage (OCV = 1.43 V) and maximum power density (Pmax = 142.8 mW cm-2) compared with Fe/C (OCV = 1.38 V, Pmax = 104.5 mW cm-2) and commercial 20 wt% Pt/C (OCV = 1.41 V, Pmax = 117.6 mW cm-2). Using dangling functional groups in CP to increase the loading efficiency of iron porphyrins offered a facile method to prepare high-performance noble-metal-free electrocatalysts for the ORR, which may provide promising applications to energy conversion devices.

Graphene-based iron single-atom catalysts for electrocatalytic nitric oxide reduction: a first-principles study

The electrocatalytic NO reduction reaction (NORR) emerges as an intriguing strategy to convert harmful NO into valuable NH3. Due to their unique intrinsic properties, graphene-based Fe single-atom catalysts (SACs) have gained considerable attention in electrocatalysis, while their potential for NORR and the underlying mechanism remain to be explored. Herein, using constant-potential density functional theory calculations, we systematically investigated the electrocatalytic NORR on the graphene-based Fe SACs. By changing the local coordination environment of Fe single atoms, 26 systems were constructed. Theoretical results show that, among these systems, the Fe SAC coordinated with four pyrrole N atoms and that co-coordinated with three pyridine N atoms and one O atom exhibit excellent NORR activity with low limiting potentials of -0.26 and -0.33 V, respectively, as well as have high selectivity toward NH3 by inhibiting the formation of byproducts, especially under applied potential. Furthermore, electronic structure analyses indicate that NO molecules can be effectively adsorbed and activated via the electron "donation-backdonation" mechanism. In particular, the d-band center of the Fe SACs was identified as an efficient catalytic activity descriptor for NORR. Our work could stimulate and guide the experimental exploration of graphene-based Fe SACs for efficient NORR toward NH3 under ambient conditions.

Oxygen reduction reaction (ORR) in alkaline solution catalysed by an atomically precise catalyst based on a Pd(II) complex supported on multi-walled carbon nanotubes (MWCNTs). Electrochemical and structural considerations

A new atomically precise, single-ion catalyst (MWCNT-LPd) for ORR (oxygen reduction reaction), consisting of a Pd(II) complex of a tetraazacycloalkane anchored on multiwalled carbon nanotubes, has been prepared through a supramolecular approach ensuring a uniform distribution of catalytic centres on the support surface. A tetraazacycloalkane was chosen to saturate the four coordination sites of the typical square planar coordination geometry of Pd(II) with the aim of ascertaining whether the metal ion must have free coordination sites to function effectively in the ORR or whether, as predicted by quantum mechanical calculations, the catalytic effect can be originated from an interaction of O2 in the fifth coordinative position. The results clearly demonstrated that tetracoordination of Pd(II) does not influence its catalytic capacity in the ORR. Electrodes based on this catalyst show ORR performance very close to that of commercial Pt electrodes, despite the low Pd(II) content (1.72% by weight) in the catalyst. The onset potential (Eon) value and the half-wave potential (E1/2) of the catalyst are, respectively, only 53 mV and 24 mV less positive than those observed for the Pt electrode and direct conversion of O2 to H2O reaches 85.0%, compared to 89% of the Pt electrode. Furthermore, a preliminary galvanostatic test (simulating a working fuel cell at a fixed potential) showed that the catalyst maintains its efficiency continuing to produce water throughout the process (the average number of electrons exchanged over time per O2 molecule remains close to 4).

The Promising Seesaw Relationship Between Activity and Stability of Ru-Based Electrocatalysts for Acid Oxygen Evolution and Proton Exchange Membrane Water Electrolysis

The development of electrocatalysts that are not reliant on iridium for efficient acid-oxygen evolution is a critical step towards the proton exchange membrane water electrolysis (PEMWE) and green hydrogen industry. Ruthenium-based electrocatalysts have garnered widespread attention due to their remarkable catalytic activity and lower commercial price. However, the challenge lies in balancing the seesaw relationship between activity and stability of these electrocatalysts during the acid-oxygen evolution reaction (OER). This review delves into the progress made in Ru-based electrocatalysts with regards to acid OER and PEMWE applications. It highlights the significance of customizing the acidic OER mechanism of Ru-based electrocatalysts through the coordination of adsorption evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM) to attain the ideal activity and stability relationship. The promising tradeoffs between the activity and stability of different Ru-based electrocatalysts, including Ru metals and alloys, Ru single-atomic materials, Ru oxides, and derived complexes, and Ru-based heterojunctions, as well as their applicability to PEMWE systems, are discussed in detail. Furthermore, this paper offers insights on in situ control of Ru active sites, dynamic catalytic mechanism, and commercial application of PEMWE. Based on three-way relationship between cost, activity, and stability, the perspectives and development are provided.

Precise Design and Modification Engineering of Single-Atom Catalytic Materials for Oxygen Reduction

Due to their unique electronic and structural properties, single-atom catalytic materials (SACMs) hold great promise for the oxygen reduction reaction (ORR). Coordinating environmental and engineering strategies is the key to improving the ORR performance of SACMs. This review summarizes the latest research progress and breakthroughs of SACMs in the field of ORR catalysis. First, the research progress on the catalytic mechanism of SACMs acting on ORR is reviewed, including the latest research results on the origin of SACMs activity and the analysis of pre-adsorption mechanism. The study of the pre-adsorption mechanism is an important breakthrough direction to explore the origin of the high activity of SACMs and the practical and theoretical understanding of the catalytic process. Precise coordination environment modification, including in-plane, axial, and adjacent site modifications, can enhance the intrinsic catalytic activity of SACMs and promote the ORR process. Additionally, several engineering strategies are discussed, including multiple SACMs, high loading, and atomic site confinement. Multiple SACMs synergistically enhance catalytic activity and selectivity, while high loading can provide more active sites for catalytic reactions. Overall, this review provides important insights into the design of advanced catalysts for ORR.

Enhancing Photocatalysis: Understanding the Mechanistic Diversity in Photocatalysts Modified with Single-Atom Catalytic Sites

Surface modification of heterogeneous photocatalysts with single-atom catalysts (SACs) is an attractive approach for achieving enhanced photocatalytic performance. However, there is limited knowledge of the mechanism of photocatalytic enhancement in SAC-modified photocatalysts, which makes the rational design of high-performance SAC-based photocatalysts challenging. Herein, a series of photocatalysts for the aerobic degradation of pollutants based on anatase TiO2 modified with various low-cost, non-noble SACs (vanadate, Cu, and Fe ions) is reported. The most active SAC-modified photocatalysts outperform TiO2 modified with the corresponding metal oxide nanoparticles and state-of-the-art benchmark photocatalysts such as platinized TiO2 and commercial P25 powders. A combination of in situ electron paramagnetic resonance spectroscopy and theoretical calculations reveal that the best-performing photocatalysts modified with Cu(II) and vanadate SACs exhibit significant differences in the mechanism of activity enhancement, particularly with respect to the rate of oxygen reduction. The superior performance of vanadate SAC-modified TiO2 is found to be related to the shallow character of the SAC-induced intragap states, which allows for both the effective extraction of photogenerated electrons and fast catalytic turnover in the reduction of dioxygen, which translates directly into diminished recombination. These results provide essential guidelines for developing efficient SAC-based photocatalysts.

Mobile energy storage technologies for boosting carbon neutrality

Carbon neutrality calls for renewable energies, and the efficient use of renewable energies requires energy storage mediums that enable the storage of excess energy and reuse after spatiotemporal reallocation. Compared with traditional energy storage technologies, mobile energy storage technologies have the merits of low cost and high energy conversion efficiency, can be flexibly located, and cover a large range from miniature to large systems and from high energy density to high power density, although most of them still face challenges or technical bottlenecks. In this review, we provide an overview of the opportunities and challenges of these emerging energy storage technologies (including rechargeable batteries, fuel cells, and electrochemical and dielectric capacitors). Innovative materials, strategies, and technologies are highlighted. Finally, the future directions are envisioned. We hope this review will advance the development of mobile energy storage technologies and boost carbon neutrality.

Tailoring the coordination environment of double-atom catalysts to boost electrocatalytic nitrogen reduction: a first-principles study

Tailoring the coordination environment is an effective strategy to modulate the electronic structure and catalytic activity of atomically dispersed transition-metal (TM) catalysts, which has been widely investigated for single-atom catalysts but received less attention for emerging double-atom catalysts (DACs). Herein, based on first-principles calculations, taking the commonly studied N-coordinated graphene-based DACs as references, we explored the effect of coordination engineering on the catalytic behaviors of DACs towards the electrocatalytic nitrogen reduction reaction (NRR), which is realized through replacing one N atom by the B or O atom to form B, N or O, N co-coordinated DACs. We found that B, N or O, N co-coordination could significantly strengthen N2 adsorption and alter the N2 adsorption pattern of the TM dimer active center, which greatly facilitates N2 activation. Moreover, on the studied DACs, the linear scaling relationship between the binding strengths of key intermediates can be attenuated. Consequently, the O, N co-coordinated Mn2 DACs, exhibiting an ultralow limiting potential of -0.27 V, climb to the peak of the activity volcano. In addition, the experimental feasibility of this DAC system was also identified. Overall, benefiting from the coordination engineering effect, the chemical activity and catalytic performance of the DACs for NRR can be significantly boosted. This phenomena can be understood from the adjusted electronic structure of the TM dimer active center due to the changes of its coordination microenvironment, which significantly affects the binding strength (pattern) of key intermediates and changes the reaction pathways, leading to enhanced NRR activity and selectivity. This work highlights the importance of coordination engineering in developing DACs for the electrocatalytic NRR and other important reactions.

Rational Modulation of Single Atom Coordination Microenvironments in a BCN Monolayer for Multifunctional Electrocatalysis

Single-atom (SA) catalysts (SACs) have demonstrated outstanding catalytic performances toward plenty of relevant electrochemical reactions. Nevertheless, controlling the coordination microenvironment of catalytically active SAs to further enhance their catalytic oerformences has remained elusive up to now. Herein, a systematic investigation of 20 transition metal atoms that are coordinated with 20 different microenvironments in a boroncarbon-nitride monolayer (BCN) is conducted using high-throughput density functional theory calculations. The experimentally synthesized ternary BCN monolayer contains carbon, nitrogen, and boron atoms in its 2D network, thus providing a lot of new coordination environments than those of the current Cx Ny nanoplatforms. By exploring the structural/electrochemical stability, catalytic activity, selectivity, and electronic properties of 400 (20 × 20) TM-BCN moieties, it is discovered that specific SA coordination environments can achieve superior stability and selectivity for different electrocatalytic reactions. Moreover, a universal descriptor to accelerate the experimental process toward the synthesis of BCN-SACs is reported. These findings not only provide useful guidance for the synthesis of efficient multifunctional BCN-SACs but also will immediately benefit researchers by levering up their understanding of the mechanistic effects of SA coordination microenvironments on electrocatalytic reactions.

Experimentally revealed and theoretically certified synergistic electronic interaction of V-doped CoS for facilitating the oxygen evolution reaction

Since electrocatalytic oxygen evolution (OER) is a four-electron transfer reaction with very slow kinetics, there is great competition to develop cheap, durable and efficient catalysts for oxygen evolution. A molecular model is designed for density functional theory (DFT) simulation calculations to guide the experiment, and this hypothesis is fully supported by the experimental data. Herein, regulating the composition and morphology of the bimetallic VCo and MoCo sulfide and monometallic sulfide nanoparticles (NPs) at the oil-water interface was achieved via a one-step hydrothermal method for efficient and durable OER electrocatalysts. Compared to CoS and MoCoS, the VCoS NPs show superior OER performance. By adjusting the atomic composition ratio of the VCoS nanoparticles, the VCoS NPs (1 : 2 : 1.5 mole ratio) showed a significant OER overpotential η = 255 mV (10 mA cm-2), and their outstanding stability was demonstrated after 48 h of continuous testing. The CoS and MoCoS NPs were also tested for comparison. Density functional theory (DFT) calculations showed that appropriate V doping (VCoS) can heighten the density of states (DOS) of the Fermi level, which generates more charge density and reduces the intermediate adsorption energy. This study not only provides efficient and powerful integrated catalysts, but also details a DFT calculation model guided by experiments to regulate the oxygen insertion technology, thus leading to the design of ideal materials and enabling more far-reaching applications in electrocatalysis.

Engineering Unsymmetrically Coordinated Fe Sites via Heteroatom Pairs Synergetic Contribution for Efficient Oxygen Reduction

Single-atom Fe catalysts are considered as the promising catalysts for oxygen reduction reaction (ORR). However, the high electronegativity of the symmetrical coordination N atoms around Fe site generally results in too strong adsorption of *OOH intermediates on the active site, severely limiting the catalytic performance. Herein, a "heteroatom pair synergetic modulation" strategy is proposed to tailor the coordination environment and spin state of Fe sites, enabling breaking the shackles of unsuitable adsorption of intermediate products on the active centers toward a more efficient ORR pathway. The unsymmetrically Co and B heteroatomic coordinated Fe single sites supported on an N-doped carbon (Fe─B─Co/NC) catalyst perform excellent ORR activity with high half-wave potential (E1/2 ) of 0.891 V and a large kinetic current density (Jk ) of 60.6 mA cm-2 , which is several times better than those of commercial Pt/C catalysts. By virtue of in situ electrochemical impedance and synchrotron infrared spectroscopy, it is observed that the optimized Fe sites can effectively accelerate the evolution of O2 into the *O intermediate, overcoming the sluggish O─O bond cleavage of the *OOH intermediate, which is responsible for fast four-electron reaction kinetics.

Bimetallic Zn/Co telluride spinel with enhanced metal-tellurium covalency for efficient water oxidation

A telluride-spinel ZnCo₂Te₄/NF catalyst delivered an overpotential (η) of only 370 mV to achieve a current density of 100 mA cm^-2 and displayed no significant degradation of performance during 50 h of operation. By virtue of in situ synchrotron infrared spectroscopic detection, an accumulation of key OOH* intermediates over the active site was observed, suggesting that the reaction followed the efficient adsorbate evolution mechanism (AEM) for water oxidation.

The rational design of high-performance graphene-based single-atom electrocatalysts for the ORR using machine learning

In this work, high-performance two-dimensional (2D) graphene-based single-atom electrocatalysts (ZZ/ZA-MN_xC_y) for the oxygen reduction reaction (ORR) were screened out using machine learning (ML). A model was built for the fast prediction of electrocatalysts and two descriptors valence electron correction (VEc) and degree of construction differences (DC) were proposed to improve the accuracy of the model prediction. Two evaluation criteria, high-performance catalyst retention rate r_R and high-performance catalyst occupancy rate r_O, were proposed to evaluate the accuracy of ML models in high-performance catalyst screening. The addition of VEc and DC in the model could change the mean absolute error (MAE_test) of the test set, the coefficient of determination (R²_test) of the test set, r_O, and r_R from 0.334 V, 0.683, 0.222, and 0.360 to 0.271 V, 0.774, 0.421, and 0.671, respectively. The partially screened potential high-performance ORR electrocatalysts such as ZZ-CoN₄ and ZZ-CoN₃C₁ were also further investigated using a Density Functional Theory (DFT) method, which confirmed the accuracy of the ML model (MAE = 0.157 V, R² = 0.821).

Geometric and Electronic Engineering of Atomically Dispersed Copper-Cobalt Diatomic Sites for Synergistic Promotion of Bifunctional Oxygen Electrocatalysis in Zinc-Air Batteries

The development of rechargeable zinc-air batteries is heavily dependent on bifunctional oxygen electrocatalysts to offer exceptional oxygen reduction/evolution reaction (ORR/OER) activities. However, the design of such electrocatalysts with high activity and durability is challenging. Herein, a strategy is proposed to create an electrocatalyst comprised of copper-cobalt diatomic sites on a highly porous nitrogen-doped carbon matrix (Cu-Co/NC) with abundantly accessible metal sites and optimal geometric and electronic structures. Experimental findings and theoretical calculations demonstrate that the synergistic effect of Cu-Co dual-metal sites with metal-N₄ coordination induce asymmetric charge distributions with moderate adsorption/desorption behavior with oxygen intermediates. This electrocatalyst exhibits extraordinary bifunctional oxygen electrocatalytic activities in alkaline media, with a half-wave potential of 0.92 V for ORR and a low overpotential of 335 mV at 10 mA cm^-2 for OER. In addition, it demonstrates exceptional ORR activity in acidic (0.85 V) and neutral (0.74 V) media. When applied to a zinc-air battery, it achieves extraordinary operational performance and outstanding durability (510 h), ranking it as one of the most efficient bifunctional electrocatalysts reported to date. This work demonstrates the importance of geometric and electronic engineering of isolated dual-metal sites for boosting bifunctional electrocatalytic activity in electrochemical energy devices.