Mehrphotonen-Mikrofabrikation

Reversible Three-Color Fluorescence Switching of an Organic Molecule in the Solid State via "Pump-Trigger" Optical Manipulation

In photoswitches that undergo fluorescence switching upon ultraviolet irradiation, photoluminescence and photoisomerization often occur simultaneously, leading to unstable fluorescence properties. Here, we successfully demonstrated reversible solid-state triple fluorescence switching through "Pump-Trigger" multiphoton manipulation. A novel fluorescence photoswitch, BOSA-SP, achieved green, yellow, and red fluorescence under excitation by pump light and isomerization induced by trigger light. The energy ranges of photoexcitation and photoisomerization did not overlap, enabling appropriate selection of the multiphoton light for "pump" and "trigger" photoswitching, respectively. Additionally, the large free volume of the spiropyran (SP) moiety in the solid state promoted reversible photoisomerization. Switching between "pump" and "trigger" light is useful for three-color tunable switching cell imaging, which can be exploited in programmable fluorescence switching. Furthermore, we exploited reversible dual-fluorescence switching in a single molecular system to successfully achieve two-color super-resolution imaging.

Frequency-Upconverted Stimulated Emission by Up to Six-Photon Excitation from Highly Extended Spiro-Fused Ladder-Type Oligo(p-phenylene)s

Frequency-upconverted fluorescence and stimulated emission induced by multiphoton absorption (MPA) have attracted much interest. As compared with low-order MPA processes, the construction of high-order MPA processes is highly desirable and rather attractive, yet remains a formidable challenge due to its inherent low transition probability. We report the observation of the first experimental frequency-upconverted fluorescence and stimulated emission by simultaneous six-photon excitation in an organic molecular system. The well-designed organic conjugated system based on cross-shaped spiro-fused ladder-type oligo(p-phenylene)s (SpL-z, z=1-3) manifests reasonably high MPA cross-sections and brilliant luminescence emission simultaneously. The six-photon absorption cross-section of SpL-3 with an extended π-conjugation was evaluated as 8.67×10^-169  cm¹²  s⁵  photon^-5 . Exceptionally efficient 2- to 6-photon excited stimulated emission was achieved under near-infrared laser excitation.

Anion-Responsive Molecules That Exhibit Switching of Two-Photon Optical Properties

Two-photon-excited fluorescent probes are important for two-photon microscopy for biomedical studies. In contrast to the many examples of probes for cationic species, such as metal ions, there have been fewer reports on the control of two-photon optical properties by anions because in such systems it is difficult to control the associated π-electronic states. This Minireview summarizes anion-responsive molecules that exhibit changes in two-photon optical properties and describes their molecular design and anion-response mechanisms, which are driven by changes in covalent bonds and noncovalent interactions. Results from a recent study of two-photon systems, where geometries and optical properties are modulated by anion binding, are also discussed.

Switching of Two-Photon Optical Properties by Anion Binding of Pyrrole-Based Boron Diketonates through Conformation Change

Two-photon absorption (TPA) dyes with intense fluorescence can be used to detect small chemical species and as sensors and bioimaging probes for specific analytes. Various TPA dyes responding to a number of external stimuli have been reported. Among them, biologically important anionic species have not been used as agents to control TPA properties because their direct electronic influences on the transition dipole moments of dyes are typically small. In this study, dipyrrolyldiketone BF₂ complexes substituted with π-extended units exhibited efficient TPA properties that could be regulated by conformation changes induced by anion binding. The TPA intensity decreased to 1/5 of the original intensity upon anion binding, which was much larger than that observed for one-photon absorption. Anion detection was achieved by a change in the emission intensity of spatially resolved spots of two-photon-excited fluorescence (TPEF) in the sample. Experimental and theoretical studies were performed to understand the mechanism of the TPA property control and showed that the drastic changes in the transition dipole moments upon conformation changes between the straight and bending forms of the π-electronic systems caused the TPA and TPEF intensities drop.

Single, Double Electronic Excitations and Exciton Effective Conjugation Lengths in π-Conjugated Systems

The 21Ag and 11Bu excited states of two prototypical π-conjugated compounds, polyacetylene and polydiacetylene, are investigated with the recently developed particle-particle random phase approximation (pp-RPA) method combined with the B3LYP functional. The polymer-limit transition energies are estimated as 1.38 and 1.72 eV for the 21Ag and 11Bu states, respectively, from an extrapolation of the computed excitation energies of model oligomers. These values increase to 1.95 and 2.24 eV for the same transitions when ground-state structures with ∼33% larger bond length alternation are adopted. Applying the pp-RPA to the vertical excitation energies in oligodiacetylene, the polymer-limit transition energies of the 21Ag and 11Bu states are computed to be 2.06 and 2.28 eV, respectively. These results are in good agreement with experimental values or theoretical best estimates, indicating that the pp-RPA method shows great promise for understanding many photophysical phenomena involving both single and double excitations.

Cleaving Direct-Laser-Written Microstructures on Demand

Using an advanced functional photoresist we introduce direct-laser-written (DLW) 3D microstructures capable of complete degradation on demand. The networks consist exclusively of reversible bonds, formed by irradiation of a phenacyl sulfide linker, giving disulfide bonds in a radical-free step-growth polymerization via a reactive thioaldehyde. The bond formation was verified in solution by ESI-MS. To induce cleavage, dithiothreitol causes a thiol-disulfide exchange, erasing the written structure. The mild cleavage of the disulfide network is highly orthogonal to other, for example, acrylate-based DLW structures. To emphasize this aspect, DLW structures were prepared incorporating reversible structural elements into a non-reversible acrylate-based standard scaffold, confirming subsequent selective cleavage. The high lateral resolution achievable was verified by the preparation of well-defined line gratings with line separations of down to 300 nm.

Lighting the Way to See Inside Two-Photon Absorption Materials: Structure-Property Relationship and Biological Imaging

The application of two-photon absorption (2PA) materials is a classical research field and has recently attracted increasing interest. It has generated a demand for new dyes with high 2PA cross-sections. In this short review, we briefly cover the structure-2PA property relationships of organic fluorophores, organic-inorganic nanohybrids and metal complexes explored by our group. (1) The two-photon absorption cross-section (δ) of organic fluorophores increases with the extent of charge transfer, which is important to optimize the core, donor-acceptor pair, and conjugation-bridge to obtain a large δ value. Among the various cores, triphenylamine appears to be an efficient core. Lengthening of the conjugation with styryl groups in the D-π-D quadrupoles and D-π-A dipoles increased δ over a long wavelength range than when vinylene groups were used. Large values of δ were observed for extended conjugation length and moderate donor-acceptors in the near-IR wavelengths. The δ value of the three-arm octupole is larger than that of the individual arm, if the core has electron accepting groups that allow significant electronic coupling between the arms; (2) Optical functional organic/inorganic hybrid materials usually show high thermal stability and excellent optical activity; therefore the design of functional organic molecules to build functional organic-inorganic hybrids and optimize the 2PA properties are significant. Advances have been made in the design of organic-inorganic nanohybrid materials of different sizes and shapes for 2PA property, which provide useful examples to illustrate the new features of the 2PA response in comparison to the more thoroughly investigated donor-acceptor based organic compounds and inorganic components; (3) Metal complexes are of particular interest for the design of new materials with large 2PA ability. They offer a wide range of metals with different ligands, which can give rise to tunable electronic and 2PA properties. The metal ions, including transition metals and lanthanides, can serve as an important part of the structure to control the intramolecular charge-transfer process that drives the 2PA process. As templates, transition metal ions can assemble simple to more sophisticated ligands in a variety of multipolar arrangements resulting in interesting and tailorable electronic and optical properties, depending on the nature of the metal center and the energetics of the metal-ligand interactions, such as intraligand charge-transfer (ILCT) and metal-ligand charge-transfer (MLCT) processes. Lanthanide complexes are attractive for a number of reasons: (i) their visible emissions are quite long-lived; (ii) their absorption and emission can be tuned with the aid of appropriate photoactive ligands; (iii) the accessible energy-transfer path between the photo-active ligands and the lanthanide ion can facilitate efficient lanthanide-based 2PA properties. Thus, the above materials with excellent 2PA properties should be applied in two-photon applications, especially two-photon fluorescence microscopy (TPFM) and related emission-based applications. Furthermore, the progress of research into the use of those new 2PA materials with moderate 2PA cross section in the near-infrared region, good Materials 2017, 10, 223 2 of 37 biocompatibility, and enhanced two-photon excited fluorescence for two-photon bio-imaging is summarized. In addition, several possible future directions in this field are also discussed (146 references).

Luminescence emission-modulated based on specific two-photon compound of triazole-conjugated pyrene derivative

A two-photon absorption compound based on triazole-conjugated pyrene derivative was synthesized, and its tunable emission was investigated.

Simultaneous Dual Encoding of Three-Dimensional Structures by Light-Induced Modular Ligation

A highly efficient strategy for the simultaneous dual surface encoding of 2D and 3D microscaffolds is reported. The combination of an oligo(ethylene glycol)-based network with two novel and readily synthesized monomers with photoreactive side chains yields two new photoresists, which can be used for the fabrication of microstructures (by two-photon polymerization) that exhibit a dual-photoreactive surface. By combining both functional photoresists into one scaffold, a dual functionalization pattern can be obtained by a single irradiation step in the presence of adequate reaction partners based on a self-sorting mechanism. The versatility of the approach is shown by the dual patterning of halogenated and fluorescent markers as well as proteins. Furthermore, we introduce a new ToF-SIMS mode ("delayed extraction") for the characterization of the obtained microstructures that combines high mass resolution with improved lateral resolution.

Vertical Flow Lithography for Fabrication of 3D Anisotropic Particles

A microfluidics-based method for the 3D fabrication of anisotropic particles is reported. The method uses a vertical microchannel where tunable light patterns solidify photocurable resins for stacking multiple layers of the resins, thus enabling an application of stereolithography concepts to conventional flow lithography. Multilayered, tapered, and angular compartmental microparticles are demonstrated.

Difluorenyl carbo-Benzenes: Synthesis, Electronic Structure, and Two-Photon Absorption Properties of Hydrocarbon Quadrupolar Chromophores

The synthesis, crystal and electronic structures, and one- and two-photon absorption properties of two quadrupolar fluorenyl-substituted tetraphenyl carbo-benzenes are described. These all-hydrocarbon chromophores, differing in the nature of the linkers between the fluorenyl substituents and the carbo-benzene core (C-C bonds for 3 a, C-C=C-C expanders for 3 b), exhibit quasi-superimposable one-photon absorption (1PA) spectra but different two-photon absorption (2PA) cross-sections σ2PA. Z-scan measurements (under NIR femtosecond excitation) indeed showed that the C≡C expansion results in an approximately twofold increase in the σ2PA value, from 336 to 656 GM (1 GM = 10(-50) cm(4) s molecule(-1) photon(-1)) at λ = 800 nm. The first excited states of Au and Ag symmetry accounting for 1PA and 2PA, respectively, were calculated at the TDDFT level of theory and used for sum-over-state estimations of σ2PA(λi), in which λi = 2 hc/Ei, h is Planck's constant, c is the speed of light, and Ei is the energy of the 2PA-allowed transition. The calculated σ2PA values of 227 GM at 687 nm for 3 a and 349 GM at 708 nm for 3 b are in agreement with the Z-scan results.

Synthesis, growth, crystalline perfection of 4-bromo-4'dimethylamino benzylideneaniline (BDMABA) and photons absorption of BDMABA crystal

One of the Schiff base 4-bromo-4'dimethylamino benzylideneaniline (BDMABA) compounds was synthesized and single crystal of the material was grown by solvent evaporation method at room temperature. Molecular structure of BDMABA was confirmed by (1)H nuclear magnetic resonance and the presence of functional groups was confirmed by Fourier Transform Infrared and Fourier Transform Raman spectral analyses. Cell parameters were determined using single crystal X-ray diffraction analysis and crystalline perfection of the grown BDMABA crystal was evaluated using high-resolution X-ray diffraction analysis. Thermal analyses indicated that the material is thermally stable up to 215 °C and its melting point is 161.5 °C. Vickers microhardness study was carried out to estimate the mechanical hardness of BDMABA crystal which shows that the crystal belongs to the class of soft materials. Linear and nonlinear optical studies were carried out using UV-vis-NIR spectrum and open aperture Z-scan technique respectively.

Light-controlled tools

Spatial and temporal control over chemical and biological processes plays a key role in life, where the whole is often much more than the sum of its parts. Quite trivially, the molecules of a cell do not form a living system if they are only arranged in a random fashion. If we want to understand these relationships and especially the problems arising from malfunction, tools are necessary that allow us to design sophisticated experiments that address these questions. Highly valuable in this respect are external triggers that enable us to precisely determine where, when, and to what extent a process is started or stopped. Light is an ideal external trigger: It is highly selective and if applied correctly also harmless. It can be generated and manipulated with well-established techniques, and many ways exist to apply light to living systems--from cells to higher organisms. This Review will focus on developments over the last six years and includes discussions on the underlying technologies as well as their applications.

Integrated three-dimensional filter separates nanoscale from microscale elements in a microfluidic chip

We report on the integration of a size-based three-dimensional filter, with micrometre-sized pores, in a commercial microfluidic chip. The filter is fabricated inside an already sealed microfluidic channel using the unique capabilities of two-photon polymerization. This direct-write technique enables integration of the filter by post-processing in a chip that has been fabricated by standard technologies. The filter is located at the intersection of two channels in order to control the amount of flow passing through the filter. Tests with a suspension of 3 μm polystyrene spheres in a Rhodamine 6G solution show that 100% of the spheres are stopped, while the fluorescent molecules are transmitted through the filter. We demonstrate operation up to a period of 25 minutes without any evidence of clogging. Preliminary validation of the device for plasma separation from whole blood is shown. Moreover, the filter can be cleaned and reused by reversing the flow.

Three-dimensional fabrication at small size scales

Despite the fact that we live in a 3D world and macroscale engineering is 3D, conventional submillimeter-scale engineering is inherently 2D. New fabrication and patterning strategies are needed to enable truly 3D-engineered structures at small size scales. Here, strategies that have been developed over the past two decades that seek to enable such millimeter to nanoscale 3D fabrication and patterning are reviewed. A focus is the strategy of self-assembly, specifically in a biologically inspired, more deterministic form, known as self-folding. Self-folding methods can leverage the strengths of lithography to enable the construction of precisely patterned 3D structures and "smart" components. This self-assembly approach is compared with other 3D fabrication paradigms, and its advantages and disadvantages are discussed.