Synthesis and Characterization of Monodisperse Hollow Fe3O4 Nanoparticles

Reductive Oligomerization of Nitroaniline Catalyzed by Fe3O4 Spheres Decorated with Group 11 Metal Nanoparticles

The present work demonstrates a simple and sustainable method for forming azo oligomers from low-value compounds such as nitroaniline. The reductive oligomerization of 4-nitroaniline was achieved via azo bonding using nanometric Fe₃O₄ spheres doped with metallic nanoparticles (Cu NPs, Ag NPs, and Au NPs), which were characterized by different analytical methods. The magnetic saturation (M _s) of the samples showed that they are magnetically recoverable from aqueous environments. The effective reduction of nitroaniline followed pseudo-first-order kinetics, reaching a maximum conversion of about 97%. Fe₃O₄-Au is the best catalyst, its a reaction rate (k _Fe3O4-Au = 0.416 mM L^-1 min^-1) is about 20 times higher than that of bare Fe₃O₄ (k _Fe3O4 = 0.018 mM L^-1 min^-1). The formation of the two main products was determined by high-performance liquid chromatography-mass spectrometry (HPLC-MS), evidencing the effective oligomerization of NA through N = N azo linkage. It is consistent with the total carbon balance and the structural analysis by density functional theory (DFT)-based total energy. The first product, a six-unit azo oligomer, was formed at the beginning of the reaction through a shorter, two-unit molecule. The nitroaniline reduction is controllable and thermodynamically viable, as shown in the computational studies.

Crystal Plane Impact of ZnFe2O4-Ag Nanoparticles Influencing Photocatalytical and Antibacterial Properties: Experimental and Theoretical Studies

This paper describes the crystal interphase impact of ZnFe₂O₄-Ag in the photodegradation of Rhodamine B. Prepared ZnFe₂O₄ nanoparticles (NPs) were deposited with Ag NPs to offer ZnFe₂O₄-Ag (0-2.5%). An X-ray diffraction peak corresponding to the Ag NPs was detected if the particle content reached about 2.0%, observing multiple crystalline interphases in HR-TEM. Magnetic saturation (Ms) was increased ∼160% times for ZnFe₂O₄-Ag (7.25 to 18.71 emu/g) and ZnFe₂O₄ (9.62 to 25.09 emu/g) if the temperature is lowered from 298 to 5.0 K; while for Fe₃O₄ (91.09 to 96.19 emu/g), the Ms increment was just about 5.6%. After analyzing the DFT-Density of State, a decrease of bandgap energy for ZnFe₂O₄-Ag₆ from the influence of the size of Ag cluster was seen. Quantum yield (Φ) was 0.60 for ZnFe₂O₄, 0.25 for ZnFe₂O₄-Ag (1.0%), 0.70 for ZnFe₂O₄-Ag (1.5%), 0.66 for ZnFe₂O₄-Ag (2.0%), and 0.66 for ZnFe₂O₄-Ag (2.5%), showing that the disposition of Ag NPs (1.5-2.5%) increases the Φ to >0.60. The samples were used to photo-oxidize RhB under visible light assisted by photopowered Langmuir adsorption. The degradation follows first-order kinetics (k = 5.5 × 10^-3 min^-1), resulting in a greater k = 2.0 × 10^-3 min^-1 for ZnFe₂O₄-Ag than for ZnFe₂O₄ (or Fe₃O₄, k = 1.1 × 10^-3 min^-1). DFT-total energy was used to analyze the intermediates formed from the RhB oxidation. Finally, the ZnFe₂O₄-Ag exhibits good antibacterial behavior because of the presence of Zn and the Ag components.

Synthesis of Highly Monodisperse Nickel and Nickel Phosphide Nanoparticles

Nickel and nickel phosphide nanoparticles are highly useful in various fields, owing to their catalytic and magnetic properties. Although several synthetic protocols to produce nickel and nickel phosphide nanoparticles have been previously proposed, controllable synthesis of nanoparticles using these methods is challenging. Herein, we synthesized highly monodisperse nickel and nickel phosphide nanoparticles via thermal decomposition of nickel-oleylamine-phosphine complexes in organic solvents. The size and composition of the nickel and nickel phosphide nanoparticles were easily controlled by changing the aging temperature, precursor concentration, and phosphine surfactant type. Large-sized monodisperse nickel nanoparticles obtained using our method were successfully applied for the purification of histidine-tagged proteins.

Magnetic Nanoparticles: Synthesis, Anisotropy, and Applications

Anisotropy is an important and widely present characteristic of materials that provides desired direction-dependent properties. In particular, the introduction of anisotropy into magnetic nanoparticles (MNPs) has become an effective method to obtain new characteristics and functions that are critical for many applications. In this review, we first discuss anisotropy-dependent ferromagnetic properties, ranging from intrinsic magnetocrystalline anisotropy to extrinsic shape and surface anisotropy, and their effects on the magnetic properties. We further summarize the syntheses of monodisperse MNPs with the desired control over the NP dimensions, shapes, compositions, and structures. These controlled syntheses of MNPs allow their magnetism to be finely tuned for many applications. We discuss the potential applications of these MNPs in biomedicine, magnetic recording, magnetotransport, permanent magnets, and catalysis.

Kirkendall Effect Boosts Phosphorylated nZVI for Efficient Heavy Metal Wastewater Treatment

Removal of non-biodegradable heavy metals has been the top priority in wastewater treatment and the development of green technologies remains a significant challenge. We demonstrate that phosphorylated nanoscale zero-valent iron (nZVI) is promising for removal of heavy metals (Ni^II , Cu^II , Cr^VI , Hg^II ) via a boosted Kirkendall effect. Phosphorylation confines tensile hoop stress on the nZVI particles and "breaks" the structurally dense spherical nZVI to produce numerous radial nanocracks. Exemplified by Ni^II removal, the radial nanocracks favor the facile inward diffusion of Ni^II and the rapid outward transport of electrons and ferrous ions through the oxide shell for surface (Ni^II /electron) and boundary (Ni^II /Fe⁰ ) galvanic exchange. Accompanied by a pronounced hollowing phenomenon, phosphorylated nZVI can instantly reduce and immobilize Ni^II throughout the oxide shell with a high capacity (258 mg Ni g^-1  Fe). For real electroplating factory wastewater treatment, this novel nZVI performs simultaneous Ni^II and Cu^II removal, producing effluent of stable quality that meets local discharge regulations.

Hybrid Nanostructured Magnetite Nanoparticles: From Bio-Detection and Theragnostics to Regenerative Medicine

Nanotechnology offers the possibility of operating on the same scale length at which biological processes occur, allowing to interfere, manipulate or study cellular events in disease or healthy conditions. The development of hybrid nanostructured materials with a high degree of chemical control and complex engineered surface including biological targeting moieties, allows to specifically bind to a single type of molecule for specific detection, signaling or inactivation processes. Magnetite nanostructures with designed composition and properties are the ones that gather most of the designs as theragnostic agents for their versatility, biocompatibility, facile production and good magnetic performance for remote in vitro and in vivo for biomedical applications. Their superparamagnetic behavior below a critical size of 30 nm has allowed the development of magnetic resonance imaging contrast agents or magnetic hyperthermia nanoprobes approved for clinical uses, establishing an inflection point in the field of magnetite based theragnostic agents.

Structure-Relaxivity Relationships of Magnetic Nanoparticles for Magnetic Resonance Imaging

Magnetic nanoparticles (MNPs) have been extensively explored as magnetic resonance imaging (MRI) contrast agents. With the increasing complexity in the structure of modern MNPs, the classical Solomon-Bloembergen-Morgan and the outer-sphere quantum mechanical theories established on simplistic models have encountered limitations for defining the emergent phenomena of relaxation enhancement in MRI. Recent progress in probing MRI relaxivity of MNPs based on structural features at the molecular and atomic scales is reviewed, namely, the structure-relaxivity relationships, including size, shape, crystal structure, surface modification, and assembled structure. A special emphasis is placed on bridging the gaps between classical simplistic models and modern MNPs with elegant structural complexity. In the pursuit of novel MRI contrast agents, it is hoped that this review will spur the critical thinking for design and engineering of novel MNPs for MRI applications across a broad spectrum of research fields.

Rational design of yolk–shell nanostructures for photocatalysis

Yolk–shell structures provide an ideal platform for the rational regulation and effective utilization of charge carriers because of their void space and large surface areas. Furthermore, the efficiency of charge behavior in every step can be further improved by many strategies. This review describes the synthesis of yolk–shell structures and their effect for the enhancement of heterogeneous photocatalysis.

Crystal phase induced band gap energy enhancing the photo-catalytic properties of Zn–Fe2O4/Au NPs: experimental and theoretical studies

Au NPs on ZnFe₂O₄ enhances visible absorption, employed for paracetamol oxidation, where peaks were resolved by 2D HPLC.

Synthesis and Biomedical Applications of Multifunctional Nanoparticles

The accumulated knowledge of nanoparticle (NP) synthesis for the last 30 years has enabled the development of functional NPs for biomedical applications. Especially, NPs with multifunctional capabilities are gaining popularity as the demand for versatile and efficient NP agents increases. Various combinations of functional materials are integrated to form multicomponent NPs with designed size, structure, and multifunctionality. Their use as diagnostic and/or therapeutic tools is demonstrated, suggesting their application potentials in healthcare and medical practice. Here, the recent achievements in the synthesis and biomedical applications of multifunctional NPs are summarized. Starting with a brief overview regarding the advances in NP synthesis and accompanying progress in nanobiotechnology, various components to construct the multifunctional NP agents, which include polymers and mesoporous, magnetic, catalytic, and semiconducting NPs, are discussed together with their overall integration forms, such as NP assembly, hollow/porous structures, or hybrid/doped systems. Following the explanation of the features that multifunctional NP agents can offer, an outlook and a brief comment regarding the future research directions are provided.

Galvanic Displacement Synthesis of Monodisperse Janus- and Satellite-Like Plasmonic-Magnetic Ag-Fe@Fe3O4 Heterostructures with Reduced Cytotoxicity

The unique physicochemical properties of silver nanoparticles offer a large potential for biomedical application, however, the serious biotoxicity restricts their usage. Herein, nanogalvanic couple Ag-Fe@Fe3O4 heterostructures (AFHs) are designed to prevent Ag+ release from the cathodic Ag by sacrificial anodic Fe, which can reduce the cytotoxicity of Ag. AFHs are synthesized with modified galvanic displacement strategy in nonaqueous solution. To eliminate the restriction of lattice mismatch between Fe and Ag, amorphous Fe@Fe3O4 nanoparticles (NPs) are selected as seeds, meanwhile, reductive Fe can reduce Ag precursor directly even at as low as 20 °C without additional reductant. The thickness of the Fe3O4 shell can influence the amorphous properties of AFHs, and a series of Janus- and satellite-like AFHs are synthesized. A "cut-off thickness" effect is proposed based on the abnormal phenomenon that with the increase of reaction temperature, the diameter of Ag in AFHs decreases. Because of the interphase interaction and the coupling effect of Ag and Fe@Fe3O4, the AFHs exhibit unique optical and magnetic properties. This strategy for synthesis of monodisperse heterostructures can be extended for other metals, such as Au and Cu.

An ultra-small NiFe2O4 hollow particle/graphene hybrid: fabrication and electromagnetic wave absorption property

Herein, ultra-small NiFe₂O₄ hollow particles, with the diameter and wall thickness of only 6 and 1.8 nm, respectively, were anchored on a graphene surface based on the nanoscale Kirkendall effect. The hybrid exhibits an excellent electromagnetic wave absorption property, comparable or superior to that of most reported absorbers. Our strategy may open a way to grow ultra-small hollow particles on graphene for applications in many fields such as eletromagnetic wave absorption and energy storage and conversion.

Liquid-Phase Transmission Electron Microscopy for Studying Colloidal Inorganic Nanoparticles

For the past few decades, nanoparticles of various sizes, shapes, and compositions have been synthesized and utilized in many different applications. However, due to a lack of analytical tools that can characterize structural changes at the nanoscale level, many of their growth and transformation processes are not yet well understood. The recently developed technique of liquid-phase transmission electron microscopy (TEM) has gained much attention as a new tool to directly observe chemical reactions that occur in solution. Due to its high spatial and temporal resolution, this technique is widely employed to reveal fundamental mechanisms of nanoparticle growth and transformation. Here, the technical developments for liquid-phase TEM together with their application to the study of solution-phase nanoparticle chemistry are summarized. Two types of liquid cells that can be used in the high-vacuum conditions required by TEM are discussed, followed by recent in situ TEM studies of chemical reactions of colloidal nanoparticles. New findings on the growth mechanism, transformation, and motion of nanoparticles are subsequently discussed in detail.

Amorphous Fe2O3/Graphene Composite Nanosheets with Enhanced Electrochemical Performance for Sodium-Ion Battery

With the increasing use of sodium-ion batteries (SIBs), developing cost-effective anode materials, such as metal oxide, for Na-ion storage is one of the most attractive topics. Due to the obviously larger ion radius of Na than that of Li, most metal oxide electrode materials fail to exhibit the same high performance for SIBs like that of Li-ion batteries. Herein, iron oxide was employed to demonstrate a concept that rationally designing an amorphous structure should be useful to enhance Na-ion storage performance of a metal oxide. Amorphous Fe₂O₃/graphene composite nanosheets (Fe₂O₃@GNS) were successfully synthesized by a facile approach as anodes for SIBs. It reveals that amorphous Fe₂O₃ nanoparticles with an average diameter of 5 nm were uniformly anchored on the surface of graphene nanosheets by the strong C-O-Fe oxygen-bridge bond. Compared to well-crystalline Fe₂O₃, amorphous Fe₂O₃@GNS exhibited superior sodium storage properties such as high electrochemical activity, high initial Coulombic efficiency of 81.2%, and good rate performance. At a current density of 100 mA/g, amorphous Fe₂O₃@GNS composites show a specific capacity of 440 mAh/g, which is obviously higher than the specific capacity of 284 mAh/g of crystalline Fe₂O₃. Even at a high current density of 2 A/g, amorphous Fe₂O₃@GNS composites still exhibit a specific capacity as high as 219 mAh/g. The excellent electrochemical performance should be attributed to the amorphous structures of Fe₂O₃ as well as strongly interfacial interaction between Fe₂O₃ and GNS, which not only accommodate more electrochemical active sites and provide the more transmission channels for sodium ions but also benefit electron transfer as well as effectively buffer the volume change of host materials during sodiation and desodiation. This concept for designing amorphous iron oxide anodes for SIBs is also expected to facilitate preparation of various amorphous nanostructure of other metal oxides and improve their Na-ion storage performance.

Synthesis, characterization and magnetic properties of hollow Co2FeAl nanoparticles: the effects of heating rate

Magnetic properties of hollow Co₂FeAl nanoparticles, synthesized in the presence of polyethylene glycol, were characterized by the first-order reversal curve (FORC) analysis.

Core/shell iron/iron oxide nanoparticles: are they promising for magnetic hyperthermia?

Core/shell iron/iron oxide nanoparticles are promising for magnetic hyperthermia provided their size is big enough (>14 nm) in order to minimize surface disorder and hollowing effects that seriously deteriorate their heating efficiency.

Controllable synthesis of coralloid Fe3O4 nanoclusters in an ionic liquid for catalytic applications

Coralloid Fe₃O₄ nanoclusters stacked by nanosheets, which expose specific planes, have been successfully synthesized with an ionic liquid-assisted solvothermal method.

Y₂O₃:Yb³⁺/Er³⁺ Hollow Spheres with Controlled Inner Structures and Enhanced Upconverted Photoluminescence

Multishell Y2 O3 :Yb(3+) /Er(3+) hollow spheres with uniform morphologies and controllable inner structures are prepared successfully by using a glucose-template hydrothermal process followed by temperature-programmed calcination. Much enhanced upconverted photoluminescence of these Y2 O3 :Yb(3+) /Er(3+) are observed, which are due to the multiple reflections and the enhanced light-harvesting efficiency of the NIR light resulting from the special features of the multishell structures.

High yield fabrication of hollow vesica-like silicon based on the Kirkendall effect and its application to energy storage

Recently, a unique process based on the Kirkendall effect was employed to generate hollow nanostructures with a wide variety of materials. However, a similar hollow structure of silicon based on the fabrication mechanism of the Kirkendall effect is still not proposed. Here, we provide an extensible synthesis method for the high yield fabrication of a uniform vesica-like hollow Si material from SiO2 based on the Kirkendall effect in a molten salt reduction process. Significantly, without further modification, the as-prepared hollow vesica-like Si exhibits a high electrochemical storage capacity and long cycling properties (∼712 mA h g(-1) at 0.36 A g(-1) over 200 cycles).

Controllable synthesis of hierarchical porous Fe3O4 particles mediated by poly(diallyldimethylammonium chloride) and their application in arsenic removal

Hierarchical porous Fe3O4 particles with tunable grain size were synthesized based on a facile poly (diallyldimethylammonium chloride) (PDDA)-modulated solvothermal method. The products were characterized with scanning electron microscopy (SEM) and transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), N2 adsorption-desorption technique, vibrating sample magnetometer (VSM), and dynamic light scattering (DLS). The results show that increasing the PDDA dosage decrease the grain size and particle size, which increased the particle porosity and enhanced the surface area from 7.05 to 32.75 m(2) g(-1). Possible mechanism can be ascribed to the PDDA function on capping the crystal surface and promoting the viscosity of reaction medium to mediate the growth and assembly of grain. Furthermore, the arsenic adsorption application of the as-obtained Fe3O4 samples was investigated and the adsorption mechanism was proposed. High magnetic Fe3O4 particles with increased surface area display improved arsenic adsorption performance, superior efficiency in low-level arsenic removal, high desorption efficiency, and satisfactory magnetic recyclability, which are very promising compared with commercial Fe3O4 particles.

Revealing bismuth oxide hollow nanoparticle formation by the Kirkendall effect

We study the formation of bismuth oxide hollow nanoparticles by the Kirkendall effect using liquid cell transmission electron microscopy (TEM). Rich dynamics of bismuth diffusion through the bismuth oxide shell have been captured in situ. The diffusion coefficient of bismuth through bismuth oxide shell is 3-4 orders of magnitude higher than that of bulk. Observation reveals that defects, temperature, sizes of the particles, and so forth can affect the diffusion of reactive species and modify the kinetics of the hollowing process.

Cobalt-substituted magnetite nanoparticles and their assembly into ferrimagnetic nanoparticle arrays

A simple process to prepare monodisperse ferrimagnetic cobalt-substituted magnetite Co(x)Fe(3-x)O4 nanoparticles is reported. These ferrimagnetic nanoparticles are readily dispersed in hexane, forming a stable ferrimagnetic nanoparticle dispersion, and allowing easy nanoparticle self-assembly. When assembled under an external magnetic field (5.5 kOe), these nanoparticles show preferred magnetic alignment with their H(c) reaching 2.49 kOe.