Discovery of a novel flavonol O-methyltransferase possessing sequential 4'- and 7-O-methyltransferase activity from Camptotheca acuminata Decne

The biosynthetic route for flavonol in Camptotheca acuminata has been recently elucidated from a chemical point of view. However, the genes involved in flavonol methylation remain unclear. It is a critical step for fully uncovering the flavonol metabolism in this ancient plant. In this study, the multi-omics resource of this plant was utilized to perform flavonol O-methyltransferase-oriented mining and screening. Two genes, CaFOMT1 and CaFOMT2 are identified, and their recombinant CaFOMT proteins are purified to homogeneity. CaFOMT1 exhibits strict substrate and catalytic position specificity for quercetin, and selectively methylates only the 4'-OH group. CaFOMT2 possesses sequential O-methyltransferase activity for the 4'-OH and 7-OH of quercetin. These CaFOMT genes are enriched in the leaf and root tissues. The catalytic dyad and critical substrate-binding sites of the CaFOMTs are determined by molecular docking and further verified through site-mutation experiments. PHE181 and MET185 are designated as the critical sites for flavonol substrate selectivity. Genomic environment analysis indicates that CaFOMTs evolved independently and that their ancestral genes are different from that of the known Ca10OMT. This study provides molecular insights into the substrate-binding pockets of two new CaFOMTs responsible for flavonol metabolism in C. acuminata.

Ball-milled zero-valent iron with formic acid for effectively removing Cu(II)-EDTA accomplished by EDTA ligands oxidative degradation and Cu(II) removal

Heavy metal complexes in industrial wastewater are challenging to be removed by conventional methods arising from their stable chelating structure. In this study, zero-valent iron (ZVI) was ball-milled with tiny formic acid (FA), and the as-prepared sample (FA-ZVIbm) was attempted to eliminate a model heavy metal complex of Cu(II)-ethylenediaminetetraacetic acid (Cu(II)-EDTA). The addition of FA to ball-milling could dramatically enhance the performance of ball-milled ZVI (ZVIbm) towards Cu(II)-EDTA removal and increase the removal rate constant by 80 times. This conspicuous improvement of Cu(II)-EDTA elimination was attributed to the ferrous formate (Fe(HCOO)2) shell formed on the surface of FA-ZVIbm. Results revealed that the Fe(HCOO)2 shell facilitated the activation of O2 to reactive oxygen species (ROS) and the leaching of Fe3+. Cu(II)-EDTA was decomplexed through both oxidative destruction and Fe3+ replacement, and the released Cu2+ was reduced by FA-ZVIbm and immobilized synchronously. Meanwhile, the ligands underwent oxidative degradation by ROS, thus avoiding the re-chelation ecological risk. Impressively, FA-ZVIbm could achieve cyclic treatment of actual copper complex wastewater and possessed promising advantage in treatment cost. This study would offer a promising approach for eliminating Cu(II)-EDTA through EDTA ligands degradation and synchronous Cu(II) removal, moreover to shed light on the decomplexation mechanism.

Triangle Cl-Ag1 -Cl Sites for Superior Photocatalytic Molecular Oxygen Activation and NO Oxidation of BiOCl

BiOCl photocatalysis shows great promise for molecular oxygen activation and NO oxidation, but its selective transformation of NO to immobilized nitrate without toxic NO2 emission is still a great challenge, because of uncontrollable reaction intermediates and pathways. In this study, we demonstrate that the introduction of triangle Cl-Ag1 -Cl sites on a Cl-terminated, (001) facet-exposed BiOCl can selectively promote one-electron activation of reactant molecular oxygen to intermediate superoxide radicals (⋅O2 - ), and also shift the adsorption configuration of product NO3 - from the weak monodentate binding mode to a strong bidentate mode to avoid unfavorable photolysis. By simultaneously tuning intermediates and products, the Cl-Ag1 -Cl-landen BiOCl achieved >90 % NO conversion to favorable NO3 - of high selectivity (>97 %) in 10 min under visible light, with the undesired NO2 concentration below 20 ppb. Both the activity and the selectivity of Cl-Ag1 -Cl sites surpass those of BiOCl surface sites (38 % NO conversion, 67 % NO3 - selectivity) or control O-Ag1 -O sites on a benchmark photocatalyst P25 (67 % NO conversion and 87 % NO3 - selectivity). This study develops new single-atom sites for the performance enhancement of semiconductor photocatalysts, and also provides a facile pathway to manipulate the reactive oxygen species production for efficient pollutant removal.

Surface oxygen vacancy-dependent molecular oxygen activation for propane combustion over α-MnO2

Oxygen vacancies (OV), as the sites of molecular oxygen adsorption and activation, play an important role in the catalytic combustion process of volatile organic compounds (VOCs). Revealing the relationship between OV concentration and molecular oxygen activation behavior is of significance to construct the efficient catalysts. Herein, α-MnO2 with different OV concentrations was prepared to investigate the molecular oxygen activation for C3H8 combustion. It is disclosed that the enhanced OV concentration in α-MnO2 induced the reconfiguration of surface metal atoms, resulting in the transformation of oxygen activation configuration from end-on mode to side-on mode. Oxygen molecules in side-on mode possessed more localized electron density and weaker coordination bond strength with surrounding Mn atoms, which were more favorable to adsorb C3H8 molecules and activate C-H bond for the improved combustion performance. This work provides a new understanding to reveal that the increased OV concentration contributes to more efficient VOCs combustion.

Highly selective synthesis of surface FeIV=O with nanoscale zero-valent iron and chlorite for efficient oxygen transfer reactions

High-valent iron-oxo species (FeIV=O) has been a long-sought-after oxygen transfer reagent in biological and catalytic chemistry but suffers from a giant challenge in its gentle and selective synthesis. Herein, we propose a new strategy to synthesize surface FeIV=O (≡FeIV=O) on nanoscale zero-valent iron (nZVI) using chlorite (ClO2-) as the oxidant, which possesses an impressive ≡FeIV=O selectivity of 99%. ≡FeIV=O can be energetically formed from the ferrous (FeII) sites on nZVI through heterolytic Cl-O bond dissociation of ClO2- via a synergistic effect between electron-donating surface ≡FeII and proximal electron-withdrawing H2O, where H2O serves as a hydrogen-bond donor to the terminal O atom of the adsorbed ClO2- thereby prompting the polarization and cleavage of Cl-O bond for the oxidation of ≡FeII toward the final formation of ≡FeIV=O. With methyl phenyl sulfoxide (PMS16O) as the probe molecule, the isotopic labeling experiment manifests an exclusive 18O transfer from Cl18O2- to PMS16O18O mediated by ≡FeIV=18O. We then showcase the versatility of ≡FeIV=O as the oxygen transfer reagent in activating the C-H bond of methane for methanol production and facilitating selective triphenylphosphine oxide synthesis with triphenylphosphine. We believe that this new ≡FeIV=O synthesis strategy possesses great potential to drive oxygen transfer for efficient high-value-added chemical synthesis.

Oxalate-Promoted SO2 Uptake and Oxidation on Iron Minerals: Implications for Secondary Sulfate Aerosol Formation

Mineral dust serves as a significant source of sulfate aerosols by mediating heterogeneous sulfur dioxide (SO2) oxidation in the atmosphere. Given that a considerable proportion of small organic acids are deposited onto mineral dust via long-range transportation, understanding their impact on atmospheric SO2 transformation and sulfate formation is of great importance. This study investigates the effect of oxalate on heterogeneous SO2 uptake and oxidation phenomenon by in situ FTIR, theoretical calculation, and continuous stream experiments, exploiting hematite (Fe2O3) as an environmental indicator. The results highlight the critical role of naturally deposited oxalate in mononuclear monodentate coordinating surface Fe atoms of Fe2O3 that enhances the activation of O2 for oxidizing SO2 into sulfate. Meanwhile, oxalate increases the hygroscopicity of Fe2O3, facilitating H2O dissociation into reactive hydroxyl groups and further augmenting the SO2 uptake capacity of Fe2O3. More importantly, other conventional iron minerals, such as goethite and magnetite, as well as authentic iron-containing mineral dust, exhibit similar oxalate-promoted sulfate accumulation behaviors. Our findings suggest that oxalate-assisted SO2 oxidation on iron minerals is one of the important contributors to secondary sulfate aerosols, especially during the nighttime with high relative humidity.

Discovery of unique CYP716C oxidase involved in pentacyclic triterpene biosynthesis from Camptotheca acuminata

Dozens of triterpenes have been isolated from Camptotheca acuminata, however, triterpene metabolism in this plant remains poorly understood. The common C28 carboxy located in the oleanane-type and ursane-type triterpenes indicates the existence of a functionally active triterpene, C28 oxidase, in this plant. Thorough mining and screening of the CYP716 genes were initiated using the multi-omics database for C. acuminata. Two CYP716A (CYP716A394 and CYP716A395) and three CYP716C (CYP716C80-CYP716C82) were identified based on conserved domain analyses and hierarchical cluster analyses. CYP716 microsomal proteins were prepared and their enzymatic activities were evaluated in vitro. The CYP716 classified into the CYP716C subfamily displays β-amyrin oxidation activity, and CYP716A displays α-amyrin and lupeol oxidation activity, based on gas chromatography-mass spectrometry analyses. The oxidation products were determined based on their mass and nuclear magnetic resonance spectrums. The optimum reaction conditions and kinetic parameters for CYP716C were determined, and functions were verified in Nicotiana benthaminana. Relative quantitative analyses revealed that these CYP716C genes were enriched in the leaves of C. acuminata plantlets after 60 d. These results indicate that CYP716C plays a dominant role in oleanane-type triterpene metabolism in the leaves of C. acuminata via a substrate-specific manner, and CYP716A is responsible for ursane- and lupane-type triterpene metabolism in fruit. This study provides valuable insights into the unique CYP716C-mediated oxidation step of pentacyclic triterpene biosynthesis in C. acuminata.

Oxalated zero valent iron enables highly efficient heterogeneous Fenton reaction by self-adapting pH and accelerating proton cycle

Heterogeneous Fenton reactions of zero-valent iron (ZVI) requires the sufficient release of Fe(II) to catalyze the H₂O₂ decomposition. However, the rate-limiting step of proton transfer through the passivation layer of ZVI restricted the Fe(II) release via Fe⁰ core corrosion. Herein we modified the shell of ZVI with highly proton-conductive FeC₂O₄·2H₂O by ball-milling (OA-ZVI^bm), and demonstrated its high heterogeneous Fenton performance of thiamphenicol (TAP) removal, with 500 times enhancement of the rate constant. More importantly, the OA-ZVI^bm/H₂O₂ showed little attenuation of the Fenton activity during 13 successive cycles, and was applicable across a wide pH range of 3.5-9.5. Interestingly, the OA-ZVI^bm/H₂O₂ reaction showed pH self-adapting ability, which initially reduced and then sustained the solution pH in the range of 3.5-5.2. The abundant intrinsic surface Fe(II) of OA-ZVI^bm (45.54% vs. 27.52% in ZVI^bm, according to Fe 2p XPS profiles) was oxidized by H₂O₂ and hydrolyzed to generate protons, and the FeC₂O₄·2H₂O shell favored the fast transfer of protons to inner Fe⁰, therefore, the consumption-regeneration cycle of protons were accelerated to drove the production of Fe(II) for Fenton reactions, demonstrated by the more prominent H₂ evolution and nearly 100% H₂O₂ decomposition by OA-ZVI^bm. Furthermore, the FeC₂O₄·2H₂O shell was stable and slightly decreased from 1.9% to 1.7% after the Fenton reaction. This study clarified the significance of proton transfer on the reactivity of ZVI, and provided an efficient strategy to achieve the highly efficient and robust heterogeneous Fenton reaction of ZVI for pollution control.

Electrochemical removal of gaseous benzene using a flow-through reactor with efficient and ultra-stable titanium suboxide/titanium-foam anode at ambient temperature

Catalytic oxidation technology is currently considered as a feasible approach to degrade and mineralize volatile organic compounds (VOCs). However, it is still challenging to realize efficient removal of VOCs through catalytic oxidation at room temperature. In our study, a novel flow-through electrocatalytic reactor was designed, composed of porous solid-electrolyte, gas-permeable titanium sub-oxides/titanium-foam (TiSO/Ti-foam) as anode and platinum coated titanium foam (Pt/Ti-foam) as cathode. This device could oxidize nearly 100% of benzene (10 ppm) to carbon dioxide at a current density of 1.2 mA/cm² under room temperature. More importantly, the device maintained excellent stability over 1000 h. Mechanism of benzene mineralization was discussed. Hydroxyl radicals generated on the TiSO/Ti-foam anode played a crucial role in the oxidation of benzene. This study provides a promising prototype of the electrochemical air purifier, and may find its application in domestic and industrial air pollution control.

Pyrolysis temperature-switchable Fe-N sites in pharmaceutical sludge biochar toward peroxymonosulfate activation for efficient pollutants degradation

Pyrolysis of pharmaceutical sludge (PS) is a promising way of safe disposal and to recover energy and resources from waste. The resulting PS biochar (PSBC) is often used as adsorbent, but has seldom been explored as catalyst. Herein we demonstrate that PSBC (0.4 g/L) could efficiently activate peroxymonosulfate (PMS) to 100% degrade 4-chlorophenol (4-CP) with rate constants of 0.42-1.70 min^-1, outperforming other reported catalysts. Interestingly, the PMS activation pathway highly depended on PSBC pyrolysis temperature, which produced dominantly high-valent iron species (e.g., Fe^IVO²⁺) at low temperature but more sulfate radical (SO₄^·-) and hydroxyl radical (·OH) at higher temperature, e.g., 0.17, 0.23, 0.12 mmol/L of Fe^IVO²⁺ and 0.009, 0.038, 0.102 mmol/L of SO₄^·-/·OH were produced within 10 min by PSBC-600/PMS, PSBC-800/PMS, and PSBC-1000/PMS, respectively. Characterization, density functional theory (DFT) simulation and Pearson correlation analysis revealed that along with the increase of pyrolysis temperatures, the active sites of PSBC gradually shifted from atomically dispersed N-coordinated Fe moieties (FeN_x) to iron nitrides (Fe_xN), which activated PMS to produce Fe^IVO²⁺ and SO₄^·-/·OH, respectively. This study clarifies the structure-activity relationships of PSBC for PMS activation, and opens a new avenue for the treatment and utilization of PS as high value-added resources.

Nitrate promoted defluorination of perfluorooctanoic acid in UV/sulfite system: Coupling hydrated electron/reactive nitrogen species-mediated reduction and oxidation

A significantly accelerated defluorination of recalcitrant perfluorooctanoic acid (PFOA) was explored with the co-present nitrate (20 mg L^-1) by UV/sulfite treatment (UV/sulfite-nitrate). The deep defluorination of PFOA and complete denitrification of nitrate were simultaneously achieved in UV/sulfite-nitrate system. At the initial 30 min, PFOA defluorination exhibited an induction period, exactly corresponding to the removal of the co-existed nitrate. Upon the induction period passed, an accelerated removal of PFOA (5 mg L^-1) occurred, nearly 100% defluorination ratio reached within 2 h. Compared with those in UV/sulfite, the kinetics of PFOA decay, defluorination, and transformation product formations were greatly enhanced in UV/sulfite-nitrate system. Reactive nitrogen species (RNS) generated from e_aq^--induced reduction of nitrate were found to play significant roles on the promoted defluorination apart from e_aq^--mediated reductive defluorination. The investigations on solution pH (7.0-11.0) confirmed that the reductive defluorination of PFOA was more efficient under alkaline conditions, however, the presence of nitrate can promote the defluorination even under neutral pH. Theoretical calculations of Fukui function demonstrated that RNS could easily launch electrophilic attack toward H-rich moieties of fluorotelomer carboxylates (FTCAs, C_nF_2n+1-(CH₂)_m-COO^-), more persistent intermediates (formed via H/F exchange), and convert FTCAs into shorter-chain perfluorinated carboxylic acids, thus facilitating the deep defluorination. Along with the analysis on the denitrification products, the liberation of fluoride ions and generated intermediates, possible decomposition pathways were proposed. This work highlights the indispensable synergy from e_aq^-/RNS with integrated reduction and oxidation on PFOA defluorination and will advance remediation technologies of perfluorinated compound contaminated water.

Surface Boronizing Can Weaken the Excitonic Effects of BiOBr Nanosheets for Efficient O2 Activation and Selective NO Oxidation under Visible Light Irradiation

The photocatalytic O₂ activation for pollutant removal highly depends on the controlled generation of desired reactive oxygen species (ROS). Herein, we demonstrate that the robust excitonic effect of BiOBr nanosheets, which is prototypical for singlet oxygen (¹O₂) production to partially oxidize NO into a more toxic intermediate NO₂, can be weakened by surface boronizing via inducing a staggered band alignment from the surface to the bulk and simultaneously generating more surface oxygen vacancy (V_O). The staggered band alignment destabilizes excitons and facilitates their dissociation into charge carriers, while surface V_O traps electrons and efficiently activates O₂ into a superoxide radical (^•O₂^-) via a one-electron-transfer pathway. Different from ¹O₂, ^•O₂^- enables the complete oxidation of NO into nitrate with high selectivity that is more desirable for safe indoor NO remediation under visible light irradiation. This study provides a facile excitonic effect manipulating method for layered two-dimensional photocatalysts and sheds light on the importance of managing ROS production for efficient pollutant removal.

Reducing temperature sensitivity of gas measurement using chirped-modulated photoacoustic spectroscopy

Resonance frequency drift caused by a change in temperature greatly limits the application of high-Q resonators with high temperature sensitivity in photoacoustic (PA) gas detection systems. In this work, a chirp-wavelength combined modulation method was designed by incorporating a real-time frequency scanning in wavelength-modulated PA spectroscopy to reduce the influence of temperature changes on measurement. Theoretical analysis shows that the chirp rate depends on the precision requirements and the cutoff frequency of the cascaded low-pass filter. Trace acetylene measurement experiment at varying temperature verified that the proposed method can significantly reduce the temperature sensitivity within a preset temperature range. Thus, this method can effectively reduce the temperature sensitivity of a high-Q resonator for improving the measurement accuracy and detection limit in trace gas detection.

An Electrochemical Strategy for Simultaneous Heavy Metal Complexes Wastewater Treatment and Resource Recovery

Heavy metals chelated with coexisting organic ligands in wastewater impose severe risks to public health and the ambient ecosystem but are also valuable metal resources. For sustainable development goals, the treatment of heavy metal complexes wastewater requires simultaneous metal-organic bond destruction and metal resource recovery. In this study, we demonstrated that a neutral pH electro-Fenton (EF) system, which was composed of an iron anode, carbon cloth cathode, and sodium tetrapolyphosphate electrolyte (Na₆TPP), could induce a successive single-electron activation pathway of molecular oxygen due to the formation of Fe(II)-TPP complexes. The boosted •OH generation in the Na₆TPP-EF process could decomplex 99.9% of copper ethylene diamine tetraacetate within 8 h; meanwhile, the released Cu ions were in situ deposited on the carbon cloth cathode in the form of Cu nanoparticles with a high energy efficiency of 2.45 g kWh^-1. Impressively, the recovered Cu nanoparticles were of purity over 95.0%. More importantly, this neutral EF strategy could realize the simultaneous removal of Cu, Ni, and Cr complexes from real electroplating effluents. This study provides a promising neutral EF system for simultaneous heavy metal complexes wastewater treatment and resource recovery and sheds light on the importance of molecular oxygen activation in the field of pollutant control.

A controllable reduction-oxidation coupling process for chloronitrobenzenes remediation: From lab to field trial

Chloronitrobenzenes (CNBs) are typical refractory aromatic pollutants. The reduction products of CNBs often possess higher toxicity, and the electron-withdrawing substituent groups are detrimental to the ring-opening during the oxidation treatment, leading to ineffective removal of CNBs by either reduction or oxidation technology. Herein we demonstrate a controllable reduction-oxidation coupling (ROC) process composed of zero-valent iron (ZVI) and H₂O₂ for the effective removal of CNBs from both water and soil. In water, ZVI first reduced p-CNB into 4-chloronitrosobenzene and 4-chloroaniline intermediates, which were then suffered from the subsequent oxidative ring-opening by ·OH generated from the reaction between Fe(II) and H₂O₂. By controlling the addition time of H₂O₂, the final mineralization rate of p-CNB reached 6.6 × 10^-1 h^-1, about 74 times that of oxidation alone (9.0 × 10^-3 h^-1). More importantly, this controllable ROC process was also applicable for the site remediation of CNBs contaminated soil by either ex-situ treatment or in-situ injection, and, respectively decreased the concentrations of p-CNB, m-CNB, and o-CNB from 1105, 980, and 94 mg/kg to 3, 1, and < 1mg/kg, meeting the remediation goals (p-CNB: < 32.35 mg/kg, o-CNB and m-CNB: < 1.98 mg/kg). These laboratory and field trial results reveal that this controllable ROC strategy is very promising for the treatment of electron-withdrawing groups substituted aromatic contaminates.

Efficient removal of PFOA with an In2O3/persulfate system under solar light via the combined process of surface radicals and photogenerated holes

The environmental persistence, high toxicity and wide spread presence of perfluorooctanoic acid (PFOA) in aquatic environment urgently necessitate the development of advanced technologies to eliminate PFOA. Here, the simultaneous application of a heterogeneous In₂O₃ photocatalyst and homogeneous persulfate oxidation (In₂O₃/PS) was demonstrated for PFOA degradation under solar light irradiation. The synergistic effect of direct hole oxidation and in-situ generated radicals, especially surface radicals, was found to contribute significantly to PFOA defluorination. Fourier infrared transform (FTIR) spectroscopy, Raman, electrochemical scanning microscope (SECM) tests and density functional theory (DFT) calculation showed that the pre-adsorption of PFOA and PS onto In₂O₃ surface were dramatically critical steps, which could efficiently facilitate the direct hole oxidation of PFOA, and boost PS activation to yield high surface-confined radicals, thus prompting PFOA degradation. Response surface methodology (RSM) was applied to regulate the operation parameters for PFOA defluorination. Outstanding PFOA decomposition (98.6%) and near-stoichiometric equivalents of fluorides release were achieved within illumination 10 h. An underlying mechanism for PFOA destruction was proposed via a stepwise losing CF₂ unit. The In₂O₃/PS remediation system under solar light provides an economical, sustainable and environmentally friendly approach for complete mineralization of PFOA, displaying a promising potential for treatment of PFOA-containing water.

Removal of antibiotic thiamphenicol by bacterium Aeromonas hydrophila HS01

Thiamphenicol (TAP) is an amphenicol antibiotic, which has a broad-spectrum inhibitory effect on both gram-positive and gram-negative bacteria. Since it is widely used in animals and aquaculture, its residues in environment may bring potential risk for human health and ecosystems. While TAP can be removed through conventional physical or chemical methods, its bioremediation using microorganisms is less studied. Here, we report the removal of TAP by a bacterial strain, Aeromonas hydrophila HS01, which can remove more than 90.0% of TAP in a living cell-dependent manner. Our results indicated that its removal efficiency can be greatly affected by the growth condition. Proteomics studies revealed a number of differentially expressed proteins of HS01 in the presence of TAP, which may play critical roles in the transportation and degradation of TAP. All these results indicate bacterial strain A. hydrophila HS01 is a new microbial resource for efficiently removing TAP, and may shed new insights in developing bioremediation approaches for TAP pollution.

[Current status of hyperkalemia in dialysis patients in China]

Objective: To investigate the prevalence and associated factors of hyperkalemia in dialysis patients. Methods: Patients underwent hemodialysis (HD) and peritoneal dialysis (PD) from multi-center databases were recruited from January 2017 to December 2019, and those aged ≥18 years and with dialysis duration ≥3 months were included to analyze the prevalence and related factors of hyperkalemia. Results: A total of 12 364 patients were enrolled in the study, and 6 836 cases were men. The average age of the patients was (51±15) years. Among these patients, 4 230 cases underwent HD while 8 134 received PD. Hyperkalemia was detected in 20.7% (2 554/12 364) of the patients while hypokalemia was found in 17.0%(2 102/12 364) of the patients. Multivariate logistic regression showed that HD (OR=2.25, 95%CI: 1.54-3.30), diabetes mellitus (DM) (OR=1.65, 95%CI: 1.17-2.32), high body mass index (BMI) (OR=1.06, 95%CI: 1.03-1.09), high levels of serum albumin (OR=1.04, 95%CI: 1.01-1.07) and phosphorus (OR=3.12, 95%CI: 2.44-4.00), low levels of serum bicarbonate (OR=0.89, 95%CI: 0.87-0.92), triglycerides (OR=0.76, 95%CI: 0.68-0.85) and creatinine (OR=0.95, 95%CI: 0.90-0.99), usage of angiotensin converting enzyme inhibitor/Angiotensin Ⅱ receptor antagonist (ACEI/ARB, OR=1.38, 95%CI: 1.11-1.72) and beta-blocker (OR=1.32, 95%CI: 1.07-1.64) were associated with hyperkalemia. Conclusions: Hyperkalemia occurred in 20.7% of the dialysis patients. HD, DM, high BMI, high levels of serum albumin and phosphorus, low levels of serum bicarbonate, triglycerides and creatinine, use of ACEI/ARB were associated with hyperkalemia.

Structural dependent Cr(VI) adsorption and reduction of biochar: hydrochar versus pyrochar

Hydrochar and pyrochar are two typical biochars, and possess different intrinsic structures and chemical properties as well as pollutant removal abilities. However, their structural dependent pollutant removal performances and the related mechanisms are far less studied. In this study, we systematically compared the Cr(VI) removal processes of hydrochar and pyrochar in dark and under simulated sunlight at pH 5.7 ± 0.1, aiming to clarify the structural dependent Cr(VI) removal of biochar. In dark, hydrochar could remove 19.0% of Cr(VI) only via adsorption within 8 h, less than that (23.5%) of pyrochar via both adsorption and indirect solution •O₂^- reduction pathway. Although simulated sunlight irradiation could significantly promote the Cr(VI) reduction performances of both hydrochar and pyrochar, the Cr(VI) reduction percentage (88.1%) of hydrochar via both direct surface electron reduction and indirect solution •O₂^- reduction pathways, was much higher than that (30.2%) of pyrochar only via indirect solution •O₂^- reduction pathway. This different Cr(VI) reduction pathway of hydrochar and pyrochar was arisen from their structural dependent Cr(VI) adsorption models, as revealed by ATR-FTIR characterization and DFT calculation. More phenolic -OH group on hydrochar surface provided abundant sites for Cr(VI) chemical adsorption to form a strong inner-sphere complex, favoring the interfacial electron transfer for the direct surface Cr(VI) reduction. In contrast, more micropores in pyrochar were responsible for the Cr(VI) physical adsorption via intra-particle and boundary layer diffusion, which hampered the surface Cr(VI) direct reduction because of the weak interfacial interaction between Cr(VI) and pyrochar. This study clarifies the influence of surface structure on the Cr(VI) adsorption and reduction pathways of biochar, and also provides an efficient Cr(VI) removal strategy with sunlight and hydrochar.

Kirkendall Effect Boosts Phosphorylated nZVI for Efficient Heavy Metal Wastewater Treatment

Removal of non-biodegradable heavy metals has been the top priority in wastewater treatment and the development of green technologies remains a significant challenge. We demonstrate that phosphorylated nanoscale zero-valent iron (nZVI) is promising for removal of heavy metals (Ni^II , Cu^II , Cr^VI , Hg^II ) via a boosted Kirkendall effect. Phosphorylation confines tensile hoop stress on the nZVI particles and "breaks" the structurally dense spherical nZVI to produce numerous radial nanocracks. Exemplified by Ni^II removal, the radial nanocracks favor the facile inward diffusion of Ni^II and the rapid outward transport of electrons and ferrous ions through the oxide shell for surface (Ni^II /electron) and boundary (Ni^II /Fe⁰ ) galvanic exchange. Accompanied by a pronounced hollowing phenomenon, phosphorylated nZVI can instantly reduce and immobilize Ni^II throughout the oxide shell with a high capacity (258 mg Ni g^-1  Fe). For real electroplating factory wastewater treatment, this novel nZVI performs simultaneous Ni^II and Cu^II removal, producing effluent of stable quality that meets local discharge regulations.

Surface structure-dependent photocatalytic O2 activation for pollutant removal with bismuth oxyhalides

The purification of water and air by semiconductor photocatalysis is a rapidly growing area for academic research and industrial innovation, featured with ambient removal of organic or inorganic pollutants by using solar light as the energy source and atmospheric O₂ as the green oxidant. Both charge transfer and energy transfer from excited photocatalysts can overcome the spin-forbidden nature of O₂. Layered bismuth oxyhalides are a new group of two-dimensional photocatalysts with an appealing geometric and surface structure that allows the dynamic and selective tuning of O₂ activation at the surface molecular level. In this Feature Article, we specifically summarize our recent progress in selective O₂ activation by engineering surface structures of bismuth oxyhalides. Then, we demonstrate selective photocatalytic O₂ activation of bismuth oxyhalides for environmental control, including water decontamination, volatile organic compound oxidation and nitrogen oxide removal, as well as selective catalytic oxidations. Challenges and opportunities regarding the design of photocatalysts with satisfactory performance for potential environmental control applications are also presented.

Surface hydrogen bond network spatially confined BiOCl oxygen vacancy for photocatalysis

Rational engineering of oxygen vacancy (V_O) at atomic precision is the key to comprehensively understanding the oxygen chemistry of oxide materials for catalytic oxidations. Here, we demonstrate that V_O can be spatially confined on the surface through a sophisticated surface hydrogen bond (HB) network. The HB network is constructed between a hydroxyl-rich BiOCl surface and polyprotic phosphoric acid, which remarkably decreases the formation energy of surface V_O by selectively weakening the metal-oxygen bonds in a short range. Thus, surface-confined V_O enables us to unambiguously distinguish the intrafacial and suprafacial oxygen species associated with NO oxidation in two classical catalytic systems. Unlike randomly distributed bulk V_O that benefits the thermocatalytic NO oxidation and lattice O diffusion by the dominant intrafacial mechanism, surface V_O is demonstrated to favor the photocatalytic NO oxidation through a suprafacial scheme by energetically activating surface O₂, which should be attributed to the spatial confinement nature of surface V_O.

The association between vitamin D receptor FokI gene polymorphism and osteoporosis in postmenopausal women: a meta-analysis

OBJECTIVE

This study aimed to quantitatively summarize the evidence for vitamin D receptor (VDR) FokI gene polymorphism and osteoporosis risk in Caucasian and Asian postmenopausal women.

MATERIALS AND METHODS

The PubMed, EMBASE, Weipu, CNKI, and Wanfang databases were searched for eligible studies. Case-control studies containing available genotype frequencies for F/f were chosen, and the odds ratio (OR) with 95% confidence interval (CI) was used to assess the strength of this association.

RESULTS

In total, 3349 osteoporosis cases and 3202 controls were identified in our meta-analysis. In the stratified analysis, a significant association was observed between VDR FokI gene polymorphism and postmenopausal osteoporosis susceptibility in Asian subjects (additive model: OR = 1.529, 95% CI 1.053-2.219, p = 0.026; dominant model: OR 2.711, 95% CI 1.693-4.342 p < 0.001; co-dominant model: ff vs. FF, OR 2.796, 95% CI 1.439-5.433 p = 0.002), and we failed to find any significant relationship in Caucasian populations.

CONCLUSION

The present meta-analysis suggests that the VDR FokI genotype is associated with increased risk of osteoporosis in Asian women but not in Caucasian women. To draw comprehensive and true conclusions, further prospective studies with larger numbers of participants worldwide are needed to examine associations between VDR FokI polymorphism and osteoporosis.

Liquid Nitrogen Activation of Zero-Valent Iron and Its Enhanced Cr(VI) Removal Performance

In this study, we report that liquid nitrogen treatment is a promising zero-valent iron activation method that does not remove the iron oxide shell; this can improve the apparent Cr(VI) removal rate constant of zero-valent iron by about 4-120 times, depending on the particle sizes and the suppliers of zero-valent iron. It was found that liquid nitrogen, with its low temperature of 77 K, could crack the iron oxide shell of zero-valent iron to produce abundant fractures because of the different thermal expansion coefficients of iron oxide and iron. These fractures provided suitable mass transfer channels for the inward transfer of water/oxygen molecules to the iron core and the subsequent in situ generation of Fe(II) for the reduction of Cr(VI) to Cr(III). More importantly, systematic characterizations confirmed the generation of an Fe(III)/Cr(III)/Cr(VI) composite on the surface of zero-valent iron during the removal, suggesting its environmental benignancy. This study provides a novel physical zero-valent iron activation method, sheds light on the importance of the iron oxide shell of zero-valent iron on Cr(VI) removal, and clarifies the intrinsic Cr(VI) removal mechanism of zero-valent iron.

Interfacial Charging-Decharging Strategy for Efficient and Selective Aerobic NO Oxidation on Oxygen Vacancy

Intelligent defect engineering to harness surface molecular processes is at the core of selective oxidation catalysis. Here, we demonstrate that the two-electron-trapped oxygen vacancy (V_O) of BiOCl, a prototypical F center (V_Ő''), is a superb site to confine O₂ toward efficient and selective NO oxidation to nitrate. Stimulated by solar light, V_Ő'' accomplishes NO oxidation through a two-electron charging (V_Ő'' + O₂ → V_Ő''-O₂^2-) and subsequent one-electron decharging process (V_Ő''-O₂^2- + NO → V_O-NO₃^- + e^-). The back-donated electron is retrapped by V_O to produce a new single-electron-trapped V_O (V_O'), simultaneously triggering a second round of NO oxidation (V_O'-O₂ + NO → V_O-NO₃^-). This unprecedented interfacial charging-decharging scheme alters the peroxide-associated NO oxidation selectivity from NO₂ to NO₃^- with a high efficiency and thus hold great promise for the treatment of risky NO _x species in indoor air.

Oxygen Vacancies Promoted the Selective Photocatalytic Removal of NO with Blue TiO2 via Simultaneous Molecular Oxygen Activation and Photogenerated Hole Annihilation

Semiconductor photocatalytic technology has great potential for the removal of dilute gaseous NO in indoor and outdoor atmospheres but suffers from unsatisfactory NO-removal selectivity due to undesirable NO₂ byproduct generation. In this study, we demonstrate that the 99% selectivity of photocatalytic NO oxidation toward nitrate can be achieved over blue TiO₂ bearing oxygen vacancies (OVs) under visible-light irradiation. First-principles density functional theory calculation and experimental results suggested that the OVs of blue TiO₂ with localized electrons could facilitate the molecular oxygen activation through single-electron pathways to generate ·O₂^- and simultaneously promote the photogenerated hole annihilation. The generated ·O₂^- directly converted NO to nitrate, while the hole annihilation inhibited the side-reaction between holes and NO to avoid toxic NO₂ byproduct formation, resulting in the highly selective removal of NO. This study reveals the dual functions of OVs in defective photocatalysts and also provides fundamental guidance for the selective purification of NO with photocatalytic technology.

MicroRNA-16 Regulates Myeloblastosis Oncogene Expression to Affect Differentiation of Acute Leukemia Cells

BACKGROUND

This study was designed to evaluate the effects of micro-RNA-16 (miR-16)-regulated expression of myeloblastosis oncogene (MYB) on the differentiation of acute leukemia cells, the expressions of miR-16 and MYB mRNA, and protein in differently differentiated leukemia cells were detected by real-time PCR and western blot.

METHODS

1,25-Dihydroxyvitamin D3 (1,25 D3) induced monocytic differentiation of HL60 cells, and the resulting changes in miR-16 and MYB expressions were detected. Morphology of the cells induced by 1,25 D3, after being transfection with miR-16 mimics, was observed by Wright-Giemsa staining. The expression of mononuclear cell surface marker CD14 was detected by flow cytometry.

RESULTS

Minimum miR-16 was expressed in early-differentiation KG-1a cells, while late-differentiation U937 and THP-1 cells had higher expressions (p < 0.01). The expressions of MYB changed oppositely. During the monocytic differentiation of HL60 cells, miR-16 expression showed a time-dependent increase, but MYB expression gradually decreased. Overexpression of miR-16 in HL60 cells promoted 1,25 D3-induced morphological changes and CD14 expression (p < 0.05).

CONCLUSIONS

MR-16 facilitated the monocytic differentiation of leukemia HL60 cells by negatively regulating MYB expression.

Dechlorination-Hydroxylation of Atrazine to Hydroxyatrazine with Thiosulfate: A Detoxification Strategy in Seconds

Hydroxylation of atrazine to nontoxic hydroxyatrazine is generally considered an efficient detoxification method to remediate atrazine-contaminated soil and water. However, previous studies suggested that hydroxylation was not the dominant pathway for atrazine degradation in the hydroxyl radical-generating systems such as Fenton reaction, ozonation and UV/H₂O₂. Herein we report that the addition of sodium thiosulfate can realize rapid hydroxylation of atrazine to hydroxyatrazine at pH ≤ 4 under room temperature. High resolution mass spectra and isotope experiments results revealed that the hydroxylation of atrazine was involved with nucleophilic substitution and subsequent hydrolysis reaction as follows. HS₂O₃^-, as a species of thiosulfate only at pH ≤ 4, first attacked C atom connecting to chlorine of atrazine to dechlorinate atrazine and produce C₈H₁₄N₅S₂O₃^-. Subsequently, the S-S bond of C₈H₁₄N₅S₂O₃^- was cleaved easily to form SO₃ and C₈H₁₄N₅S^-. Next, C₈H₁₄N₅S^- was hydrolyzed to generate hydroxyatrazine and H₂S. Finally, the comproportionation of SO₃ and H₂S in situ produced S⁰ during hydroxylation of atrazine with thiosulfate. This study clarifies the importance of degradation pathway on the removal of pollutants, and also provides a nonoxidative strategy for atrazine detoxification in seconds.

Visible Light Driven Organic Pollutants Degradation with Hydrothermally Carbonized Sewage Sludge and Oxalate Via Molecular Oxygen Activation

Converting sewage sludge into functional environmental materials has become an attractive sewage sludge disposal route. In this study, we synthesize a sewage sludge-based material via a facile one-pot hydrothermal carbonization method and construct a visible light molecular oxygen activation system with hydrothermally carbonized sewage sludge (HTC-S) and oxalate to degrade various organic pollutants. It was found that iron species of HTC-S could chelate with oxalate to generate H₂O₂ via molecular oxygen activation under visible light, and also promote the H₂O₂ decomposition to produce ^•OH for the fast organic pollutants degradation. Taking sulfadimidine as the example, the apparent degradation rate of HTC-S/oxalate system was almost 5-20 times that of iron oxides/oxalate system. This outstanding degradation performance was attributed to the presence of iron-containing clay minerals in HTC-S, as confirmed by X-ray diffraction measurements and Mössbauer spectrometry. In the oxalate solution, these iron-containing clay minerals could be excited more easily than common iron oxides under visible light, because the silicon species strongly interacted with iron species in HTC-S to form Fe-O-Si bond, which lowered the excitation energy of Fe-oxalate complex. This work provides an alternative sewage sludge conversion pathway and also sheds light on the environmental remediation applications of sewage sludge-based materials.

Comparison of aerobic atrazine degradation with zero valent aluminum and zero valent iron

This study systematically compared the degradation of atrazine (ATR) with aerobic zero-valent aluminum (ZVAl/Air) and zero-valent iron (ZVI/Air) systems. By comparing the ATR degradation curves and rate in the ZVAl/Air and the ZVI/Air systems, a significant induction period was observed in the ZVAl/Air system, and the pseudo-first-order rate constant of ATR degradation in the second stage by ZVAl was 6.4 times faster than that by ZVI. The differences in ATR degradation patterns of the two systems stemmed from the different redox nature and electrical conductivity of aluminum (oxide) and iron (oxide). Reactive oxygen species measurement and electron spin spectra analysis indicated that more hydroxyl radical was generated through molecular oxygen activation in the ZVAl/Air system, leading to enhanced ATR degradation in the ZVAl/Air process. By analyzing the intermediates of atrazine degradation, we found that ATR underwent an oxidative dealkylation and hydroxyl-dechlorination degradation pathway, and the low toxicity cyanuric acid was the final product in both systems. However, aluminum ions released in the ZVAl/Air system exceeded the regulated standard value, which might cause environmental pollution. Finally, the pros and cons of potential environmental remediation of the ZVAl/Air and ZVI/Air processes were evaluated.

New opportunities for efficient N2 fixation by nanosheet photocatalysts

Catalytic ammonia synthesis from dinitrogen (N2) under mild conditions has been considered to be the "holy grail" of N2 fixation, which is one of the most important chemical processes in the agriculture, biological and industrial fields. Given that current artificial N2 fixation is still dominated by the energy-intensive Haber-Bosch process, solar N2 fixation represents an encouraging and fascinating route for carbon-free and energy-saving N2 fixation. However, its practical application is seriously hampered by surface sluggish reaction kinetics. In this minireview, we share our perspectives on the use of two-dimensional (2D) nanosheets for the manipulation of photocatalytic N2 fixation. Nanosheet photocatalysts serve as the perfect platform for the engineering of surface active sites, including defects and iron, all of which can not only bolster photon-exciton interaction toward robust charge carriers generation upon light absorption, but also mimic the function schemes of MoFe-cofactor in nitrogenase toward sufficient N2 binding and activation. These merits endowed by nanosheets photocatalysts provide instructive information on exploring the rich nitrogen photochemistry on solid surfaces and offer new opportunities for the design of novel photocatalysts towards efficient N2 fixation.

Oxygen Vacancies Mediated Complete Visible Light NO Oxidation via Side-On Bridging Superoxide Radicals

It is of a great challenge to seek for semiconductor photocatalysts with prominent reactivity to remove kinetically inert dilute NO without NO₂ emission. In this study, complete visible light NO oxidation mediated by O₂ is achieved over a defect-engineered BiOCl with selectivity exceeding 99%. Well-designed oxygen vacancies on the prototypical (001) surface of BiOCl favored the possible formation of geometric-favorable superoxide radicals (•O₂^-) in a side-on bridging mode under ambient condition, which thermodynamically suppressed the terminal end-on •O₂^- associated NO₂ emission in case of higher temperatures, and thus selectively oxidized NO to nitrate. These findings can help us to understand the intriguing surface chemistry of photocatalytic NO oxidation and design highly efficient NO _x removal systems.

Mn2+ promoted Cr(VI) reduction with oxalic acid: The indispensable role of In-situ generated Mn3

In this study, we demonstrate that Mn²⁺ can greatly promote the Cr(VI) reduction by oxalic acid at pH<5 via an induction period and a subsequent auto-acceleration process. The Cr(VI) reduction rate constant during the late auto-acceleration process was about 10 times that of the initial induction period. Characterization results revealed that this interesting two-step Cr(VI) reduction phenomenon was attributed to the in-situ generated Mn³⁺ by the oxidation of Mn²⁺ with Cr(VI) in the presence of oxalic acid during the induction period. The in-situ generated Mn³⁺ might complex with oxalate and Cr(VI) to produce a ternary complex, thus facilitating the electron transfer from oxalate to Cr(VI) to automatically accelerate the Cr(VI) reduction process. These findings shed insight into the possible roles of widely existed Mn ions (Mn²⁺ and Mn³⁺) and oxalic acid in the transformation of Cr(VI) in natural aquatic environment, and also provided an efficient way to remediate Cr(VI)-containing acid wastewater.

Efficient light-driven CO2 hydrogenation on Ru/CeO2 catalysts

An efficient catalysis system for light-driven CO₂ hydrogenation was designed and the function mechanism of light was investigated.

Photochemistry of Hydrochar: Reactive Oxygen Species Generation and Sulfadimidine Degradation

Biochar, mainly including pyrochar produced via pyrolysis of biomass at moderate temperatures of 350-700 °C and hydrochar formed by hydrothermal carbonization in a range of 150-350 °C, has received increasing attention because of its significant environmental impacts. It is known that pyrochar can generate reactive oxygen species even in the dark owing to the presence of persistent free radicals, but hydrochar is far less studied. In this study, we systematically investigate the photochemistry of hydrochar and check its effects on the sulfadimidine degradation. Different from pyrochar derived from the same biomass, hydrochar could generate much more H₂O₂ and •OH under daylight irradiation, which could enhance the sulfadimidine degradation rate six times more than that found in the dark. Raman spectroscopy, Fourier transform infrared spectroscopy, electron paramagnetic resonance, and X-ray photoelectron spectroscopy were employed to elucidate this interesting phenomenon. Characterization results revealed that the higher reactive oxygen species generation ability of hydrochar under solar light irradiation was attributed to its abundant photoactive surface oxygenated functional groups. This study clarifies the differences of pyrochar and hydrochar on organic pollutant degradation, and also sheds light on environmental effects of hydrochar.

Oxygen Vacancy Associated Surface Fenton Chemistry: Surface Structure Dependent Hydroxyl Radicals Generation and Substrate Dependent Reactivity

Understanding the chemistry of hydrogen peroxide (H₂O₂) decomposition and hydroxyl radical (•OH) transformation on the surface molecular level is a great challenge for the application of heterogeneous Fenton system in the fields of chemistry, environmental, and life science. We report in this study a conceptual oxygen vacancy associated surface Fenton system without any metal ions leaching, exhibiting unprecedented surface chemistry based on the oxygen vacancy of electron-donor nature for heterolytic H₂O₂ dissociation. By controlling the delicate surface structure of catalyst, this novel Fenton system allows the facile tuning of •OH existing form for targeted catalytic reactions with controlled reactivity and selectivity. On the model catalyst of BiOCl, the generated •OH tend to diffuse away from the (001) surface for the selective oxidation of dissolved pollutants in solution, but prefer to stay on the (010) surface, reacting with strongly adsorbed pollutants with high priority. These findings will extend the scope of Fenton catalysts via surface engineering and consolidate the fundamental theories of Fenton reactions for wide environmental applications.

Hydroxylamine Promoted Goethite Surface Fenton Degradation of Organic Pollutants

In this study, we construct a surface Fenton system with hydroxylamine (NH₂OH), goethite (α-FeOOH), and H₂O₂ (α-FeOOH-HA/H₂O₂) to degrade various organic pollutants including dyes (methyl orange, methylene blue, and rhodamine B), pesticides (pentachlorophenol, alachlor, and atrazine), and antibiotics (tetracycline, chloramphenicol, and lincomycin) at pH 5.0. In this surface Fenton system, the presence of NH₂OH could greatly promote the H₂O₂ decomposition on the α-FeOOH surface to produce ·OH without releasing any detectable iron ions during the alachlor degradation, which was different from some previously reported heterogeneous Fenton counterparts. Moreover, the ·OH generation rate constant of this surface Fenton system was 10²-10⁴ times those of previous heterogeneous Fenton processes. The interaction between α-FeOOH and NH₂OH was investigated with using attenuated total reflectance Fourier transform infrared spectroscopy and density functional theory calculations. The effective degradation of organic pollutants in this surface Fenton system was ascribed to the efficient Fe(III)/Fe(II) cycle on the α-FeOOH surface promoted by NH₂OH, which was confirmed by X-ray photoelectron spectroscopy analysis. The degradation intermediates and mineralization of alachlor in this surface Fenton system were then systematically investigated using total organic carbon and ion chromatography, liquid chromatography-mass spectrometry, and gas chromatography-mass spectrometry. This study offers a new strategy to degrade organic pollutants and also sheds light on the environmental effects of goethite.

Ascorbic acid induced atrazine degradation

In this study, we systematically investigated the degradation efficiency and the degradation mechanism of atrazine in the presence of ascorbic acid at different pH values. Although atrazine could be degraded by ascorbic acid in a wide pH range from 4 to 12, its degradation under either acidic (pH≤4) or alkaline (pH≥12) condition was more efficient than under neutral condition (pH=7). This pH dependent atrazine degradation was related to the reactive characteristic of atrazine and the reductive activity of ascorbic acid. The ascorbic acid induced atrazine degradation pathways at different pH were investigated by comparing the atrazine degradation intermediates with liquid chromatography-mass spectrometry, high performance liquid chromatography and ion chromatography. It was found that more products were detected in presence of ascorbic acid at alkaline condition. The appearance of chloride ions confirmed the dechlorination of atrazine by ascorbic acid in the absence of molecular oxygen, while its dechlorination efficiency reached highest at pH 12. These results can shed light on the application of AA for the organic pollutant remediation.

Ascorbic acid/Fe@Fe2O3: A highly efficient combined Fenton reagent to remove organic contaminants

In this study, we demonstrate that the combination of ascorbic acid and Fe@Fe2O3 core-shell nanowires (AA/Fe@Fe2O3) offers a highly efficient Fenton reagent. This combined Fenton reagent exhibited extremely high activity on the decomposition of H2O2 to produce OH for the degradation of various organic contaminants, including rhodamine B, methylene blue, alachlor, atrazine, siduron, lincomycin, and chloroamphenicol. The contaminant degradation constants in the AA/Fe@Fe2O3/H2O2 Fenton systems were 38-53 times higher than those in the conventional homogeneous Fenton system (Fe(II)/H2O2) at pH 3.8. Moreover, the OH generation rate constant in the AA/Fe@Fe2O3/H2O2 Fenton system was 1-3 orders of magnitudes greater than those of heterogeneous Fenton systems developed with other iron-containing materials (α-FeOOH, α-Fe2O3, FeOCl, and so on). The high activity of AA/Fe@Fe2O3 was attributed to the effective Fe(III)/Fe(II) cycle and the iron-ascorbate complex formation to stabilize ferrous ions with desirable and steady concentrations. During the AA/Fe@Fe2O3/H2O2 Fenton process, ascorbic acid served as a reducing and complexing reagent, enabling the reuse of Fe@Fe2O3 nanowires. We systematically investigated the alachlor and ascorbic acid degradation and found that they could be effectively degraded in the AA/Fe@Fe2O3/H2O2 system, accompanying with 100% of dechlorination and 92% of denitrification. This study sheds light on the importance of Fe(III)/Fe(II) cycle for the design of high efficient Fenton system and provides an alternative pathway for the organic contaminants removal.

Ascorbic acid enhanced activation of oxygen by ferrous iron: A case of aerobic degradation of rhodamine B

Molecular oxygen activation by ferrous ions (Fe(II)) in aqueous solution could generate reactive oxygen species (ROS) with high oxidation potential via reaction between Fe(II) and oxygen molecules (Fe(II)/air), however, ROS yielded in the Fe(II)/air process is insufficient for removal of organic pollutants due to the irreversible ferric ions (Fe(III)) accumulation. In this study, we demonstrate that ascorbic acid (AA) could enhance ROS generation via oxygen activation by ferrous irons (AA/Fe(II)/air) and thus improve the degradation of rhodamine (RhB) significantly. It was found that the first-order aerobic degradation rate of RhB in the AA/Fe(II)/air process in the presence of ascorbic acid is more than 4 times that of the Fe(II)/Air system without adding ascorbic acid. The presence of ascorbic acid could relieve the accumulation of Fe(III) by reductive accelerating the Fe(III)/Fe(II) cycles, as well as lower the redox potential of Fe(III)/Fe(II) through chelating effect, leading to enhanced ROS generation for promoting RhB degradation. This study not only sheds light on the effect of ascorbic acid on aerobic Fe(II) oxidation, but also provides a green method for effective remediation of organic pollutants.