Halbleiterphotokatalyse - mechanistische und präparative Aspekte

Heterogeneous Photocatalytic Strategies for C(sp3 )-H Activation

Activation of ubiquitous C(sp3 )-H bonds is extremely attractive but remains a great challenge. Heterogeneous photocatalysis offers a promising and sustainable approach for C(sp3 )-H activation and has been fast developing in the past decade. This Minireview focuses on mechanism and strategies for heterogeneous photocatalytic C(sp3 )-H activation. After introducing mechanistic insights, heterogeneous photocatalytic strategies for C(sp3 )-H activation including precise design of active sites, regulation of reactive radical species, improving charge separation and reactor innovations are discussed. In addition, recent advances in C(sp3 )-H activation of hydrocarbons, alcohols, ethers, amines and amides by heterogeneous photocatalysis are summarized. Lastly, challenges and opportunities are outlined to encourage more efforts for the development of this exciting and promising field.

Direct, Site-Selective and Redox-Neutral α-C-H Bond Functionalization of Tetrahydrofurans via Quantum Dots Photocatalysis

As one of the most ubiquitous bulk reagents available, the intrinsic chemical inertness of tetrahydrofuran (THF) makes direct and site-selective C(sp³ )-H bond activation difficult, especially under redox neutral condition. Here, we demonstrate that semiconductor quantum dots (QDs) can activate α-C-H bond of THF via forming QDs/THF conjugates. Under visible light irradiation, the resultant alkoxyalkyl radical directly engages in radical cross-coupling with α-amino radical from amino C-H bonds or radical addition with alkene or phenylacetylene, respectively. In contrast to stoichiometric oxidant or hydrogen atom transfer reagents required in previous studies, the scalable benchtop approach can execute α-C-H bond activation of THF only by a QD photocatalyst under redox-neutral condition, thus providing a broad of value added chemicals starting from bulk THFs reagent.

Photoredox-Catalyzed Simultaneous Olefin Hydrogenation and Alcohol Oxidation over Crystalline Porous Polymeric Carbon Nitride

Booming of photocatalytic water splitting technology (PWST) opens a new avenue for the sustainable synthesis of high-value-added hydrogenated and oxidized fine chemicals, in which the design of efficient semiconductors for the in-situ and synergistic utilization of photogenerated redox centers are key roles. Herein, a porous polymeric carbon nitride (PPCN) with a crystalline backbone was constructed for visible light-induced photocatalytic hydrogen generation by photoexcited electrons, followed by in-situ utilization for olefin hydrogenation. Simultaneously, various alcohols were selectively transformed to valuable aldehydes or ketones by photoexcited holes. The porosity of PPCN provided it with a large surface area and a short transfer path for photogenerated carriers from the bulk to the surface, and the crystalline structure facilitated photogenerated charge transfer and separation, thus enhancing the overall photocatalytic performance. High reactivity and selectivity, good functionality tolerance, and broad reaction scope were achieved by this concerted photocatalysis system. The results contribute to the development of highly efficient semiconductor photocatalysts and synergistic redox reaction systems based on PWST for high-value-added fine chemical production.

Synthetic Semiconductor Photoelectrochemistry

In the field of synthetic organic chemistry, photochemical and electrochemical approaches are often considered to be competing technologies that induce single electron transfer (SET). Recently, their fusion, i. e., the "photoelectrochemical" approach, has become the focus of attention. In this approach, both solar and electrical energy are used in creative combinations. Historically, the term "photoelectrochemistry" has been used in more inorganic fields, where a photovoltaic effect exhibited by semiconducting materials is employed. Semiconductors have also been studied intensively as photocatalysts; however, they recently have taken a back seat to molecular photocatalysts. In this account, we would like to revisit semiconductor photocatalysts in the field of synthetic organic chemistry to demonstrate that semiconductor "photoelectrochemical" approaches are more than mere alternatives to molecular photochemical and/or electrochemical approaches.

Unconventional Photocatalysis in Conductive Polymers: Reversible Modulation of PEDOT:PSS Conductivity by Long-Lived Poly(Heptazine Imide) Radicals

In photocatalysis, small organic molecules are converted into desired products using light responsive materials, electromagnetic radiation, and electron mediators. Substitution of low molecular weight reagents with redox active functional materials may increase the utility of photocatalysis beyond organic synthesis and environmental applications. Guided by the general principles of photocatalysis, we design hybrid nanocomposites composed of n-type semiconducting potassium poly(heptazine imide) (K-PHI), and p-type conducting poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the redox active substrate. Electrical conductivity of the hybrid nanocomposite, possessing optimal K-PHI content, is reversibly modulated combining a series of external stimuli ranging from visible light under inert conditions and to dark conditions under an O2 atmosphere. Using a conductive polymer as the redox active substrate allows study of the photocatalytic processes mediated by semiconducting photocatalysts through electrical conductivity measurements.

Light-Driven Alcohol Splitting by Heterogeneous Photocatalysis: Recent Advances, Mechanism and Prospects

Splitting of alcohols into hydrogen and corresponding carbonyl compounds, also called acceptorless alcohol dehydrogenation, is of great significance for both synthetic chemistry and hydrogen production. Light-Driven Alcohol Splitting (LDAS) by heterogeneous photocatalysis is a promising route to achieve such transformations, and it possesses advantages including high selectivity of the carbonyl compounds, extremely mild reaction conditions (room temperature and irradiation of visible light) and easy separation of the photocatalysts from the reaction mixtures. Because a variety of alcohols can be derived from biomass, LDAS can also be regarded as one of the most sustainable approaches for hydrogen production. In this Review, recent advances in the LDAS catalyzed by the heterogeneous photocatalysts are summarized, focusing on the mechanistic insights for the LDAS and aspects that influence the performance of the photocatalysts from viewpoints of metallic co-catalysts, semiconductors, and metal/semiconductor interfaces. In addition, challenges and prospects have been discussed in order to present a complete picture of this field.

Emerging Concepts in Carbon Nitride Organic Photocatalysis

Carbon nitrides encompass a class of transition-metal-free materials possessing numerous advantages such as low cost (few Euros per gram), high chemical stability, broad tunability of redox potentials and optical bandgap, recyclability, and a high absorption coefficient (>10⁵  cm^-1 ), which make them highly attractive for application in photoredox catalysis. In this Review, we classify carbon nitrides based on their unique properties, structure, and redox potentials. We summarize recently emerging concepts in heterogeneous carbon nitride photocatalysis, with an emphasis on the synthesis of organic compounds: 1) Illumination-Driven Electron Accumulation in Semiconductors and Exploitation (IDEASE); 2) singlet-triplet intersystem crossing in carbon nitride excited states and related energy transfer; 3) architectures of flow photoreactors; and 4) dual metal/carbon nitride photocatalysis. The objective of this Review is to provide a detailed overview regarding innovative research in carbon nitride photocatalysis focusing on these topics.

Visible-Light-Activated C-C Bond Cleavage and Aerobic Oxidation of Benzyl Alcohols Employing BiMXO5 (M=Mg, Cd, Ni, Co, Pb, Ca and X=V, P)

The synthesis, structure, optical and photocatalytic studies of a family of compounds with the general formula, BiMXO₅ ; M=Mg, Cd, Ni, Co, Pb, Ca and X=V, P is presented. The compounds were prepared by regular solid-state reaction of constituents in the temperature range of 720-810 °C for 24 h. The compounds were characterized by powder X-ray diffraction (PXRD) methods. The Rietveld refinement of the PXRD patterns have been carried out to establish the structure. The optical absorption spectra along with the colors in daylight have been explained employing the allowed d-d transition. In addition, the observed colors of some of the V⁵⁺ containing compounds were explained using metal-to-metal charge transfer (MMCT) from the partially filled transition-metal 3d orbitals to the empty 3d orbitals of V⁵⁺ ions. The near IR (NIR) reflectivity studies indicate that many compounds exhibit good NIR reflectivity, suggesting that these compounds can be employed as 'cool pigments'. The experimentally determined band gaps of the prepared compounds were found to be suitable to exploit them for visible light activated photocatalysis. Photocatalytic C-C bond cleavage of alkenes and aerobic oxidation of alcohols were investigated employing visible light, which gave good yields and selectivity. The present study clearly demonstrated the versatility of the Paganoite family of compounds (BiMXO₅ ) towards new colored inorganic materials, visible-light photocatalysts and 'cool pigments'.

Revisiting the Limiting Factors for Overall Water-Splitting on Organic Photocatalysts

In pursuit of inexpensive and earth abundant photocatalysts for solar hydrogen production from water, conjugated polymers have shown potential to be a viable alternative to widely used inorganic counterparts. The photocatalytic performance of polymeric photocatalysts, however, is very poor in comparison to that of inorganic photocatalysts. Most of the organic photocatalysts are active in hydrogen production only when a sacrificial electron donor (SED) is added into the solution, and their high performances often rely on presence of noble metal co-catalyst (e.g. Pt). For pursuing a carbon neutral and cost-effective green hydrogen production, unassisted hydrogen production solely from water is one of the critical requirements to translate a mere bench-top research interest into the real world applications. Although this is a generic problem for both inorganic and organic types of photocatalysts, organic photocatalysts are mostly investigated in the half-reaction, and have so far shown limited success in hydrogen production from overall water-splitting. To make progress, this article exclusively discusses critical factors that are limiting the overall water-splitting in organic photocatalysts. Additionally, we also have extended the discussion to issues related to stability, accurate reporting of the hydrogen production as well as challenges to be resolved to reach 10 % STH (solar-to-hydrogen) conversion efficiency.

Incorporating p-Phenylene as an Electron-Donating Group into Graphitic Carbon Nitride for Efficient Charge Separation

Low charge-separation transport efficiency resulting from structural defects largely limits photocatalytic hydrogen production over polymeric graphitic carbon nitride (PCN) photocatalyst. Herein, an electron-donating group, namely p-phenylene, is incorporated into PCN by a polycondensation reaction between carbon nitride and p-phenylenediamine (or p-benzoquinone) to repair the structural defects. The p-phenylene-modified PCN exhibits an almost fivefold increase in H₂ evolution, a threefold increase in photocurrent density, and higher nonradiative rate (0.285 ns^-1 ). Spectroscopic studies confirm that p-phenylene tends to bridge the heptazine-based oligomers through a polycondensation reaction. Theoretical calculations reveal that anchoring of the heptazine units by p-phenylene induces localization of h⁺ and e^- on the phenylene and melem moieties, respectively, which effectively separates the charge carriers. This strategy provides an opportunity to overcome structural defects in carbon nitride for efficient photocatalytic solar energy conversion.

Internal Polarization Modulation in Bi2 MoO6 for Photocatalytic Performance Enhancement under Visible-Light Illumination

A built-in electric field from polarization inside polar photocatalysts could provide the driving force for photogenerated electrons and holes to move in opposite directions for better separation to improve their photocatalytic performance. The photocatalytic performance of a polar photocatalyst of Bi₂ MoO₆ has been enhanced through the precise control of its structure to increase internal polarization. DFT calculations predicted that a shortened crystal lattice parameter b in Bi₂ MoO₆ could induce larger internal polarization, which was achieved by the modulation of the pH of the reaction solution during a solvothermal synthetic process. A series of Bi₂ MoO₆ samples were created with reaction solutions of pH≈1, 4, and 8; the crystal lattice parameter b was found to decrease gradually with increasing solution pH. Accordingly, these Bi₂ MoO₆ samples demonstrated a gradually enhanced photocatalytic performance with decreasing crystal lattice parameter b, as demonstrated by the photocatalytic degradation of sulfamethoxazole/phenol and disinfection of Staphylococcus aureus bacteria under visible-light illumination due to improved photogenerated charge-carrier separation. This study demonstrates an innovative design strategy for materials to further enhance the photocatalytic performance of polar photocatalysts for a broad range of technical applications.

Atom-Transfer Radical Addition to Unactivated Alkenes by using Heterogeneous Visible-Light Photocatalysis

Heterogeneous visible-light photocatalysis represents an important route toward the development of sustainable organic synthesis. In this study visible light-induced, heavy metal-free atom-transfer radical addition to unactivated terminal olefins is carried out by using the combination of heterogeneous titanium dioxide as photocatalyst and a hypervalent iodine(III) reagent as co-initiator. The reaction can be applied to a range of substrates with good functional-group tolerance under very mild conditions. In addition to a number of commonly used atom-transfer reagents, the relatively challenging chloroform is also suitable.

Metal Phosphides as Co-Catalysts for Photocatalytic and Photoelectrocatalytic Water Splitting

Solar-to-hydrogen conversion based on photocatalytic and photoelectrocatalytic water splitting is considered as a promising technology for sustainable hydrogen production. Developing earth-abundant H₂ -production materials with robust activity and stability has become the mainstream in this field. Due to the unique properties and characteristics, transition metal phosphides (TMPs) have been proven to be high performance co-catalysts to replace some of the classic precious metal materials in photocatalytic water splitting. In this Minireview, we summarize the recent significant progress of TMPs as cocatalysts for water splitting reaction with high activity and stability. Firstly, the characteristic of TMPs is briefly introduced. Then, we mainly discuss the recent research efforts toward their application as photocatalytic co-catalysts in photocatalytic H₂ -production, O₂ -evolution and photoelectrochemical water splitting. Finally, the catalytic mechanism, current existing challenges and future working directions for improving the performance of TMPs are proposed.

Visible-Light-Mediated [4+2] Annulation of N-Cyclobutylanilines with Alkynes Catalyzed by Self-Doped Ti3+ @TiO2

We herein report a visible-light-mediated heterogeneous [4+2] annulation of N-cyclobutylanilines with alkynes catalyzed by self-doped Ti3+ @TiO2 . The self-doped Ti3+ @TiO2 is stable under photooxidation conditions, easy to recycle, and can be used multiple times without appreciable loss of activity. Extensive mechanistic studies suggest that the annulation reaction is mediated by singlet oxygen, which is generated through the photosensitization of oxygen in the air by the self-doped Ti3+ @TiO2 . In contrast, the homogeneous variant catalyzed by a far more expensive iridium complex proceeds under an inert atmosphere, which indicates a different mechanism. The substrate scopes of the two processes are comparable.

Solar Electricity and Solar Fuels: Status and Perspectives in the Context of the Energy Transition

The energy transition from fossil fuels to renewables is already ongoing, but it will be a long and difficult process because the energy system is a gigantic and complex machine. Key renewable energy production data show the remarkable growth of solar electricity technologies and indicate that crystalline silicon photovoltaics (PV) and wind turbines are the workhorses of the first wave of renewable energy deployment on the TW scale around the globe. The other PV alternatives (e.g., copper/indium/gallium/selenide (CIGS) or CdTe), along with other less mature options, are critically analyzed. As far as fuels are concerned, the situation is significantly more complex because making chemicals with sunshine is far more complicated than generating electric current. The prime solar artificial fuel is molecular hydrogen, which is characterized by an excellent combination of chemical and physical properties. The routes to make it from solar energy (photoelectrochemical cells (PEC), dye-sensitized photoelectrochemical cells (DSPEC), PV electrolyzers) and then synthetic liquid fuels are presented, with discussion on economic aspects. The interconversion between electricity and hydrogen, two energy carriers directly produced by sunlight, will be a key tool to distribute renewable energies with the highest flexibility. The discussion takes into account two concepts that are often overlooked: the energy return on investment (EROI) and the limited availability of natural resources-particularly minerals-which are needed to manufacture energy converters and storage devices on a multi-TW scale.