Highly Selective Detection of Nitro Explosives by a Luminescent Metal-Organic Framework

Using eugenol scaffold to explore the explosive sensing properties of Cd(II)-based coordination polymers: experimental studies and real sample analysis

Eugenol, the major constituent of clove oil, has been explored as an essential natural ingredient for ages owing to its versatile pharmacological properties. However, to date, the coordination chemistry of eugenol derivatives has not been much explored. In the present work, an eugenol-based Schiff base ligand (HL) was synthesized and structurally confirmed through ESI-MS, NMR, and FT-IR spectroscopy studies. Consequently, the N,O-donor chelating ligand HL was coordinated with Cd2+, in the presence of bridging pseudohalides (thiocyanate, SCN-, and dicyanamide, N(CN)2-) to synthesize two luminescent coordination polymers (CPs 1 and 2): [Cd2(L)2(X)2]n (where HL = 4-allyl-2-(((2-(benzylamino)ethyl) imino)methyl)-6-methoxyphenol and Xs are bridging pseudohalides, i.e., SCN- and N(CN)2-) on a Cd-eugenol scaffold. The CPs depicted structural diversity, bulk-phase purity, thermal stability, and the presence of interlayer supramolecular C-H⋯π interactions together with C-H⋯S (for CP 1) and C-H⋯N (for CP 2) interactions. The CPs further exemplified themselves as selective and sensitive 'turn-off' probes towards trinitrophenol (TNP) (quenching efficiency: 82.02% and 83.86% for 1 and 2) among a pool of hazardous nitroaromatic compounds (NACs). Accordingly, 1 and 2 exhibited an ultralow limit of detection (LOD) of 0.29 and 0.15 μM, with high quenching constants (KSV) of 5.91 × 104 and 17.60 × 104 M-1, respectively. In addition, TNP sensing events were evidenced to be recyclable and exhibited fast response (∼31 s, 1, and ∼40 s, 2), which increased its real-world viability. Vapor phase TNP sensing was also accomplished upon drop-casted CP films. Experimental investigations and theoretical DFT study confirmed the cooperative occurrence of RET-IFE-PET-collisional quenching and non-covalent π⋯π stacking as key factors involved in the TNP sensing performance. The competency of 1 and 2 in the detection of TNP from several complex environmental matrices (CEMs), viz. matchstick powder, river and sewage water, and soil specimens, was also established with good recovery (∼66-86% and ∼68-93% for 1 and 2, respectively) and high KSV values (3.90-11.39 × 104 and 6.17-18.79 × 104 M-1 for 1 and 2, respectively).

Multiple-Emitting Luminescent Metal-Organic Framework as an Array-on-a-MOF for Rapid Screening and Discrimination of Nitroaromatics

Fluorescence array technologies have attracted great interest in the sensing field because of their high sensitivity, low cost, and capability of multitarget detection. However, traditional array sensing relies on multiple independent sensors and thus often requires time-consuming and laborious measurement processes. Herein, we introduce a novel fluorescence array strategy of the array-on-a-metal-organic framework (MOF), which integrates multiple array elements into a single MOF matrix to achieve facile sensing and discrimination of multiple target analytes. As a proof-of-concept system, we constructed a luminescent MOF containing three different emitting channels, including a lanthanide ion (europium/Eu3+, red emission), a fluorescent dye (7-hydroxycoumarin-4-acetic acid/HCAA, blue emission), and the MOF itself (UiO-66-type MOF, blue-violet emission). Five structurally similar nitroaromatic compounds (NACs) were chosen as the targets. All three channels of the array-on-a-MOF displayed rapid and stable fluorescence quenching responses to NACs (response equilibrium achieved within 30 s). Different responses were generated for each channel against each NAC due to the various quenching mechanisms, including photoinduced electron transfer, energy competition, and the inner filter effect. Using linear discriminant analysis, the array-on-a-MOF successfully distinguished the five NACs and their mixtures at varying concentrations and demonstrated good sensitivity to quantify individual NACs (detect limit below the advisory concentration in drinking water). Moreover, the array also showed feasibility in the sensing and discrimination of multiple NACs in real water samples. The proposed "array-on-a-MOF" strategy simplifies multitarget discrimination procedures and holds great promise for various sensing applications.

Fluorescence turn-on mode of Eu3+ complex nanocomposite to detect histamine for seafood freshness

Biogenic amines (BAs), which naturally occur as chemicals in seafood, are indicators of food freshness and quality. High concentrations of BAs can cause an undesirable inflammatory response. However, traditional detection methods cannot meet the needs of rapid analysis nowadays. It is essential to explore a simple and valid method to monitor the food quality. Herein, we design and prepare a nanoclay-based turn on fluorescent material with BAs response, which could be used for the real-time and visual detection of raw fish freshness. As the concentration of BAs increase, the sensor of the fluorescence signal is significantly enhanced. The sensor demonstrated wonderful response and sensitivity which showed a detection limit of 0.935 mg/L for typical BAs histamine within a linear range of 2-14 mg/L in an aqueous solution. More importantly, we developed a responsive BAs device by doping the sensor into polyvinyl alcohol (PVA), which is well applied as a rapid-responsive fluorescent marker for visual monitoring the freshness of raw fish.

An optical sensing platform for the detection of anti-cancer drugs and their cytotoxicity screening using a highly selective phosphorene-based composite

Monitoring therapeutic drugs and their elimination is crucial because they may cause severe side effects on the human body. Methotrexate (MTX) is a widely used anti-cancer drug, which is highly expensive, and the detection of unwanted overdoses of MTX using traditional procedures is time-consuming and involves complex instrumentation. In this work, we have developed a nanocomposite material using phosphorene, cystine, and gold (Ph-Cys-Au) that shows excellent optical properties. This nanocomposite can be used as an optical sensing platform for the detection of MTX in the range 0-260 μM. The synthesized sensing platform is very sensitive, selective, and cost-effective for the detection of MTX. Ph-Cys-Au can effectively detect MTX in aqueous media with a limit of detection (LOD) of about 0.0266 nM (for a linear range of 0-140 μM) and 0.0077 nM (for a linear range of 160-260 μM). The nanocomposite is equally selective for real samples, such as human blood serum (HBS) and artificial urine (AU) with a LOD of 0.0914 nM and 0.0734 nM, respectively. We have also determined the limit of quantification (LOQ); the LOQ values for the aqueous media were 0.0807 nM (for a linear range of 0-140 μM) and 0.0234 nM (for a linear range of 160-260 μM), whereas, the values for HBS and AU were around 0.2771 nM and 0.2226 nM, respectively. Moreover, the nanocomposite also provides a feasible platform for cytotoxicity screening in cancerous cells (Caco-2 cell lines) and non-cancerous cells (L-929 cell lines).

Selective Supramolecular Recognition of Nitroaromatics by a Fluorescent Metal-Organic Cage Based on a Pyridine-Decorated Dibenzodiaza-Crown Macrocyclic Co(II) Complex

Two isomorphous fluorescent (FL) lantern-shaped metal-organic cages 1 and 2 were prepared by coordination-directed self-assembly of Co(II) centers with a new aza-crown macrocyclic ligand bearing pyridine pendant arms (L_py). The cage structures were determined using single-crystal X-ray diffraction analysis, thermogravimetric, elemental microanalysis, FT-IR spectroscopy, and powder X-ray diffraction. The crystal structures of 1 and 2 show that anions (Cl^- in 1 and Br^- in 2) are encapsulated within the cage cavity. 1 and 2 bear two coordinated water molecules that are directed inside the cages, surrounded by the eight pyridine rings at the "bottom" and the "roof" of the cage. These hydrogen bond donors, π systems, and the cationic nature of the cages enable 1 and 2 to encapsulate the anions. FL experiments revealed that 1 could detect nitroaromatic compounds by exhibiting selective and sensitive fluorescence quenching toward p-nitroaniline (PNA), recommending a limit of detection of 4.24 ppm. Moreover, the addition of 50 μL of PNA and o-nitrophenol to the ethanolic suspension of 1 led to a significant large FL red shift, namely, 87 and 24 nm, respectively, which were significantly higher than the corresponding values observed in the presence of other nitroaromatic compounds. The titration of the ethanolic suspension of 1, with various concentrations of PNA (>12 μM) demonstrated a concentration-dependent emission red shift. Hence, the efficient FL quenching of 1 was capable of distinguishing the dinitrobenzene isomers. Meanwhile, the observed red shift (10 nm) and quenching of this emission band under the influence of a trace amount of o- and p-nitrophenol isomers also showed that 1 could discriminate between o- and p-nitrophenol. Replacement of the chlorido with a bromido ligand in 1 generated cage 2 which was a more electron-donating cage than 1. The FL experiments showed that 2 was partially more sensitive and less selective toward NACs than 1.

Trace Explosive Detection Based on Photonic Crystal Amplified Fluorescence

With increasing demand for public security and environmental protection, it is highly desirable to develop strategies to identify trace explosives (e. g., 2,4,6-trinitrotoluene (TNT)). Herein, we report novel photonic crystal (PC)-based sensor chips for trace TNT detection by using amplification effect of PCs on fluorescence (FL) signals. The sensor chips are constructed by integrating silica nanoparticles (NPs) modified with (3-aminopropyl)triethoxysilane (APTES) and fluorescein isothiocyanate isomer (FITC) and PC substrates. The amino groups on FITC-APTES-silica NPs can specifically bind with TNT molecules to form Meisenheimer complexes and strongly quench the FL signal of neighboring fluorophores FITC through Förster resonance energy transfer. PCs with matched PBG can amplify the FL signal of FITC-APTES-silica NPs about 24.4-fold and significantly improve sensitivity and resolution of trace TNT detection with the limit of detection of 0.23 nM. The PC-based sensor chips are stable, sensitive, and reliable TNT sensing platforms, showing great potential in homeland safety and environmental protection.

A Ni-MOF as Fluorescent/Electrochemical Dual Probe for Ultrasensitive Detection of Picric Acid from Aqueous Media

A water-stable, microporous, luminescent Ni(II)-based metal-organic framework (MOF) (Ni-OBA-Bpy-18) with a 4-c uninodal sql topology was solvothermally synthesized using mixed N-, O-donor-directed π-conjugated co-ligands. The extraordinary performance of this MOF toward rapid monitoring of mutagenic explosive trinitrophenol (TNP) in aqueous and vapor phases by the fluorescence "Turn-off" technique with an ultralow detection limit of 66.43 ppb (K_sv: 3.45 × 10⁵ M^-1) was governed by a synchronous occurrence of photoinduced electron transfer-resonance energy transfer-intermolecular charge transfer (PET-RET-ICT) and non-covalent π···π weak interactions, as revealed from density functional theory studies. The recyclable nature of the MOF, detection from complex environmental matrices, and fabrication of a handy MOF@cotton-swab detection kit certainly escalated the on-field viability of the probe. Interestingly, the presence of electron-withdrawing TNP decisively facilitated the redox events of the reversible Ni^III/II and Ni^IV/III couples under an applied voltage based on which electrochemical recognition of TNP was realized by the Ni-OBA-Bpy-18 MOF/glassy carbon electrode, with an excellent detection limit of ∼0.6 ppm. Such detection of a specific analyte by MOF-based probe via two divergent yet coherent techniques is unprecedented and yet to be explored in relevant literature.

A Luminescent Cu(II)-MOF with Lewis Basic Schiff Base Sites for the Highly Selective and Sensitive Detection of Fe3+ Ions and Nitrobenzene

A Schiff base functionalized Cu(II)-based metal-organic framework (MOF) denoted as Cu-L, was developed via a solvothermal method using low-cost starting material, i.e., Schiff base linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid (L). Good crystallinity and thermal stability of synthesized Cu-L was confirmed by the crystallographic and thermogravimetric studies. An excellent photoluminescent properties of Cu-L ensure their suitability for the ultrafast detection of Fe³⁺ ions and nitrobenzene via a turn-off quenching response. The remarkable sensitivity of Cu-L towards Fe³⁺ ions and nitrobenzene was certified by the low limit of detection (LOD) of 47 ppb and 0.004 ppm, respectively. With incorporated free azine groups, this MOF could selectively capture Fe³⁺ ions and nitrobenzene in aqueous solution. The plausible mechanistic pathway for the quenching in the fluorescence intensity of the Cu-L in the presence of Fe³⁺ ions and nitrobenzene have been explained in detail through the density functional theory calculations, photo-induced electron transfer (PET), fluorescence resonance energy transfer (FRET), and competitive energy adsorption. This present study open a new avenue to synthesize novel crystalline MOF-based sensing materials from cheap Schiff base linkers for fast sensing of toxic pollutants.

Dual-Color 2D Lead-Organic Framework with Two-Fold Interlocking Structures for the Detection of Nitrofuran Antibiotics and 2,6-Dichloro-4-nitroaniline

The misuse of organic pollutants such as nitrofuran antibiotics (NFAs) and 2,6-dichloro-4-nitroaniline (DCN) has become a hot topic of global concern, and developing rapid, efficient, and accurate techniques for detecting NFAs and pesticides in water is a major challenge. Here, we designed a novel lead-based anion 2D metal-organic framework (MOF){[(CH₃)₂NH₂]₂[Pb(TCBPE)(H₂O)₂]}_n (F3) with interlocking structures, in which TCBPE stands for 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene. Powder X-ray diffraction and thermogravimetric analysis revealed that F3 has excellent chemical and solvent stability. It is worth noting that F3 has a grinding discoloration effect. The solvent-protected grinding approach achieved F3B with a high quantum yield (QY = 73.77%) and blue fluorescence, while the direct grinding method produced F3Y with a high quantum yield (QY = 37.27%) and yellow-green fluorescence. Importantly, F3B can detect NFAs in water rapidly and sensitively while remaining unaffected by other antibiotics. F3Y can identify DCN in water quickly and selectively while remaining unchanged by other pesticides. F3B demonstrated high selectivity and rapid response to NFAs at a limit of detection (LOD) as low as 0.26 μM, while F3Y indicated high selectivity and responded quickly to DCN in water at an LOD as low as 0.14 μM. The method was successfully applied to detect NFAs in actual water samples of the fish tanks and ponds as well as the pesticide DCN in soil samples. The recovery rates were 97.0-105.15% and 102.2-106.48%, and the relative standard deviations were 0.63-1.45% and 0.29-1.69%, respectively. In addition, F3B and F3Y can be made into fluorescent test papers for the visual detection of NFAs and DCN, respectively. Combined with experiments and density functional theory calculations, the mechanism of fluorescence quenching of MOFs by target analytes was also revealed.

Non–contact real–time detection of trace nitro-explosives by MOF composites visible–light chemiresistor

To create an artificial structure to remarkably surpass the sensitivity, selectivity and speed of the olfaction system of animals is still a daunting challenge. Herein, we propose a core-sheath pillar (CSP) architecture with a perfect synergistic interface that effectively integrates the advantages of metal–organic frameworks and metal oxides to tackle the above-mentioned challenge. The sheath material, NH₂-MIL-125, can concentrate target analyte, nitro-explosives, by 10¹² times from its vapour. The perfect band-matched synergistic interface enables the TiO₂ core to effectively harvest and utilize visible light. At room temperature and under visible light, CSP (TiO₂, NH₂-MIL-125) shows an unexpected self-promoting analyte-sensing behaviour. Its experimentally reached limit of detection (∼0.8 ppq, hexogeon) is 10³ times lower than the lowest one achieved by a sniffer dog or all sensing techniques without analyte pre-concentration. Moreover, the sensor exhibits excellent selectivity against commonly existing interferences, with a short response time of 0.14 min.

Electrocatalysis of 2,6-Dinitrophenol Based on Wet-Chemically Synthesized PbO-ZnO Microstructures

In this approach, a reliable 2,6-dinitrophenol (2,6-DNP) sensor probe was developed by applying differential pulse voltammetry (DPV) using a glassy carbon electrode (GCE) decorated with a wet-chemically prepared PbO-doped ZnO microstructures’ (MSs) electro-catalyst. The nanomaterial characterizing tools such as FESEM, XPS, XRD, UV-vis., and FTIR were used for the synthesized PbO-doped ZnO MSs to evaluate in detail of their optical, structural, morphological, functional, and elemental properties. The peak currents obtained in DPV analysis of 2,6-DNP using PbO-doped ZnO MSs/GCE were plotted against the applied potential to result the calibration of 2,6-DNP sensor expressed by ip(µA) = 1.0171C(µM) + 22.312 (R2 = 0.9951; regression co-efficient). The sensitivity of the proposed 2,6-DNP sensor probe obtained from the slope of the calibration curve as well as dynamic range for 2,6-DNP detection were found as 32.1867 µAµM−1cm−2 and 3.23~16.67 µM, respectively. Besides this, the lower limit of 2,6-DNP detection was calculated by using signal/noise (S/N = 3) ratio and found as good lowest limit (2.95 ± 0.15 µM). As known from the perspective of environment and healthcare sectors, the existence of phenol and their derivatives are significantly carcinogenic and harmful which released from various industrial sources. Therefore, it is urgently required to detect by electrochemical method with doped nanostructure materials. The reproducibility as well as stability of the working electrode duration, response-time, and the analysis of real environmental-samples by applying the recovery method were measured, and found outstanding results in this investigation. A new electrochemical research approach is familiarized to the development of chemical sensor probe by using nanostructured materials as an electron sensing substrate for the environmental safety (ecological system).

Stable Metal-Organic Frameworks for Fluorescent Detection of Tetracycline Antibiotics

The rapid detection of antibiotics in agricultural products is of great significance. In this work, two stable fluorescent metal-organic frameworks (MOFs), BUT-178 and BUT-179, are synthesized and used to detect tetracycline antibiotics. Among them, BUT-179 exhibits better performance in the detection of different tetracycline antibiotics in water and eggs. The limits of detection of BUT-179 toward tetracycline, aureomycin, oxytetracycline, and doxycycline all reach the nanomolar level. Furthermore, the cycling tests confirm that BUT-179 can be easily recovered and repeatedly used without an obvious performance loss. This work demonstrates the excellent application potential of MOFs for food safety, especially the fluorescence detection of antibiotics in foods.

Unfolding the Role of Building Units of MOFs with Mechanistic Insight Towards Selective Metal Ions Detection in Water

The potential emergence of fluorescence-based techniques has propelled research towards developing probes that can sense trace metal ions specifically. Although luminescent metal-organic frameworks (MOFs) are well suited for this application, the role of building blocks towards detection is not fully understood. In this work, a systematic screening by varying number of Lewis basic (pyridyl-N atoms) sites is carried out in a series of isostructural, robust UiO-67 MOFs, and targeting a model metal ion-Fe³⁺ . All the three fluorescent MOFs are seen to present quenching response towards Fe³⁺ ions in water. However, UiO-67@N exhibits highly selective and sensitive response, whereas emission of both UiO-67 and UiO-67@NN is quenched by several metal ions. Detailed experimental and theoretical mechanistic investigation is carried out in addition to demonstration of UiO-67@N being able to sense trace amount of Fe³⁺ ions in synthetic biological water sample. Further, UiO-67@N based mixed-matrix membrane (MMM) has been prepared and employed to mimic the real time Fe³⁺ ions detection in water.

Ultrasound Irradiation Assisted Synthesis of Luminescent Nano Amide-Functionalized Metal-Organic Frameworks; Application Toward Phenol Derivatives Sensing

Two nano amide-functionalized metal-organic frameworks (MOFs) with molecular formula [Co(oba) (bpta)]·(DMF)₂ TMU-50 and [Co₂(oba)₂ (bpfn)]·(DMF)_2.5 TMU-51 obtained under ultrasonic method without any surfactants. The only difference between the two selected amide functionalized pillar ligands, N,N′-bis(4-pyridinyl)-terephthalamide (bpta), and N,N′-bis-(4-pyridylformamide)-1,5-naphthalenediamine (bpfn), is related to the naphthyl group, which led to the different luminescence properties of the nano frameworks. In this study, the special ability of the luminescent nano MOFs were investigated to sensitize nitroaromatic compounds. Due to its unique and porous framework, Nano TMU-50 shows a good sensitivity towards nitro phenol by strong fluorescence emission with a detection limit of 2 × 10^–3 mM⁻¹. Both nano MOF structures were characterized via many analyses such as powder X-ray diffraction, Field Emission Scanning Electron Microscopy (FE-SEM), elemental analysis, and FTIR spectroscopy. Moreover, the effect of a number of important parameters including initial reagent concentrations, power of ultrasound, time on morphology, and size of nano structures were examined. According to the fluorescence titration results, the activated nano-TMU-50 detected NP selectively with a quick response.

Thermoinduced structural-transformation and luminescent conversion in hybrid manganese halides

We report here the synthesis of hybrid manganese halide crystals, (C₄H₇N₂)MnCl₃· H₂O and (C₄H₇N₂)₂MnCl₄, by using the same organic ligand 2-methylimidazole. Upon heating treatment, the red-emissive (C₄H₇N₂)MnCl₃· H₂O crystal is structurally transformed into green-emissive (C₄H₇N₂)₂MnCl₄crystalin situ. The crystal structural analysis reveals that the [MnCl₅· H₂O]^3-octahedra chains decompose into mono [MnCl₄]^2-tetrahedra, accompanied by the departure of H₂O molecules. Upon cooling in air or water vapor, the crystal structure and luminescence of (C₄H₇N₂)₂MnCl₄are transformed to those of (C₄H₇N₂)MnCl₃· H₂O. Thein situconversion of luminescence between (C₄H₇N₂)MnCl₃· H₂O and (C₄H₇N₂)₂MnCl₄provides new insight into the potential application of hybrid manganese halides.

A MOF chemosensor for highly sensitive and ultrafast detection of folic acid in biofriendly medium, paper strips and real samples

A new dansyl functionalized Zr(iv) MOF was used for ultra-fast (<5 s), highly sensitive (detection limit: 1.3 nM) and selective fluorescence sensing of folic acid in bio-fluids, real samples and paper strips.

A low-dimensional N-rich coordination polymer as an effective fluorescence sensor for 2,4,6-trinitrophenol detection in an aqueous medium

Stable one-dimensional coordination polymer is used as a highly selective sensor for the detection of TNP.

Hydrazone connected stable luminescent covalent-organic polymer for ultrafast detection of nitro-explosives

Developing promising luminescent probes for the selective sensing of nitro-explosives remains a challenging issue. Porous luminescent covalent–organic polymers are one of the excellent sensing probes for trace hazardous materials. Herein, fluorescent monomers 1,1,2,2-tetrakis(4-formyl-(1,1′-biphenyl))ethane (TFBE) and 1,3,5-benzenetricarboxylic acid trihydrazide (BTCH) were selected to build a novel hydrazone connected stable luminescent covalent–organic polymer (H-COP) of high stability by typical Schiff-base reaction. The N₂ sorption study, BET surface area analysis, and TGA profile indicate the porosity and stability of this H-COP material. Such properties of the H-COP material enable a unique sensing platform for nitro-explosives with great sensitivity (Ksv ∼ 10⁶ M) and selectivity up to μM. This polymer material shows attractive selectivity and sensitivity towards phenolic nitro-explosives and other common explosives among earlier reported COP-based sensors.

A novel H-COP was synthesized through Schiff-base condensation reaction, which shows high sensitivity (K_sv ∼ 10⁶ M⁻¹) and selectivity (μM level) towards nitro-explosives.

Coordination Polymers as a Functional Material for the Selective Molecular Recognition of Nitroaromatics and ipso-Hydroxylation of Arylboronic Acids

We report the synthesis and structural characterization of two coordination polymers (CPs), namely; [{Zn(L)(DMF)₄ } ⋅ 2BF₄ ]_α (1) and [{Cd(L)₂ (Cl)₂ } ⋅ 2H₂ O]_α (2) (where L=N² ,N⁶ -di(pyridin-4-yl)naphthalene-2,6-dicarboxamide). Crystal packing of 1 reveals the existence of channels running along the b- and c-axis filled by the ligated DMF and lattice anions, respectively. Whereas, crystal packing of 2 reveals that the metallacycles of each 1D chain are intercalating into the groove of adjacent metallacycles resulting in the stacking of 1D loop-chains to form a sheet-like architecture. In addition, both 1 and 2 were exploited as multifunctional materials for the detection of nitroaromatic compounds (NACs) as well as a catalyst in the ipso-hydroxylation of aryl/heteroarylboronic acids. Remarkably, 1 and 2 showed high fluorescence stability in an aqueous medium and displayed a maximum 88% and 97% quenching efficiency for 4-NPH, respectively among all the investigated NACs. The mechanistic investigation of NACs recognition suggested that the fluorescence quenching occurred via electron as well as energy transfer process. Furthermore, the ipso-hydroxylation of aryl/heteroarylboronic acids in presence of 1 and 2 gave up to 99% desired product yield within 15 min in our established protocol. In both cases, 1 and 2 are recyclable upto five cycles without any significant loss in their efficiency.

Recyclable Supramolecular Assembly-Induced Emission System for Selective Detection and Efficient Removal of Mercury(II)

An efficient strategy for simultaneously detecting and removing Hg²⁺ from water is vital to address mercury pollution. Herein a supramolecular assembly G⊂H with photoluminescent properties is facilely constructed through the self-assembly of a functional pillar[5]arene bearing two N,N-dimethyldithiocarbamoyl binding sites (H) and an AIE-active tetraphenylethene derivative (G). Remarkably, the fluorescence of G⊂H can be exclusively quenched by Hg²⁺ among the 30 cations due to the formation of non-luminous ground state complex and only L-cysteine can restore fluorescence in the common 20 amino acids. Meanwhile, the probe G⊂H has a considerable thermal and pH stability, a good anti-interference property from various cations, and a satisfactory sensitivity. More importantly, G⊂H exhibits a prominent capability of Hg²⁺ removal with rapid capture rate (within 1 h) and excellent adsorption efficiency (98 %), as well as a highly efficient recyclability without losing any adsorption activity.

Lanthanide Metal-Organic Framework-Based Fluorescent Sensor Arrays to Discriminate and Quantify Ingredients of Natural Medicine

The discrimination and quantification of the ingredients from natural medicines are a challenging issue due to their complicated and various structures. Metal-organic frameworks (MOFs) have shown great promise in sensing applications. Here, we report a fluorescent sensor array for rapid identification of some natural compounds using a sensor array composed of four kinds of lanthanide (Eu³⁺ and Tb³⁺) fluorescent MOFs (Ln-MOFs), which have diversified fluorescent responses to 26 active/toxic compounds including 12 saponins, 7 flavonoids, 3 stilbenes, and 4 anthraquinones. The fluorescence of the Ln-MOFs after reaction with the compounds was summarized as datasets and processed by principle component analysis (PCA) and hierarchical cluster analysis (HCA) methods. The corresponding responses of the 4 types of compounds are well separated on 2D/3D PCA score plots and HCA dendrograms. We have also tested typical blind samples by concentration-dependent PCA, and an accuracy of 100% was obtained. In addition, the response mechanisms of the Ln-MOFs to the compounds were also studied. Compared with traditional methods using liquid chromatography-mass spectrometry, the developed fluorescent sensor array provides a more efficient and economic strategy to discriminate various active/toxic ingredients in natural medicine.

Monodisperse amino-modified nanosized zero-valent iron for selective and recyclable removal of TNT: Synthesis, characterization, and removal mechanism

Nitroaromatic explosives are major pollutants produced during wars that cause serious environmental and health problems. The removal of a typical nitroaromatic explosive, 2,4,6-trinitrotoluene (TNT), from aqueous solution, was conducted using a new recyclable magnetic nano-adsorbent (Fe@SiO₂NH₂). This adsorbent was prepared by grafting amino groups onto Fe@SiO₂ particles with a well-defined core-shell structure and demonstrated monodispersity in solution. The removal performance of the nano-adsorbent towards TNT was found to be 2.57 and 4.92 times higher than that towards two analogous explosives, 2,4-dinitrotoluene (2,4-DNT) and 2-nitrotoluene (2-NT), respectively, under neutral conditions. The difference in the removal performance among the three compounds was further compared in terms of the effects of different conditions (pH value, ionic strength, humic acid concentration, adsorbent modification degree and dosage, etc.) and the electrostatic potential distributions of the three compounds. The most significant elevation is owing to modification of amino on Fe@SiO₂ which made a 20.7% increase in adsorption efficiency of TNT. The experimental data were well fit by the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model, indicating multilayer adsorption on a heterogeneous surface. The experimental results and theoretical considerations show that the interactions between Fe@SiO₂NH₂ NPs and TNT correspond to dipole-dipole and hydrophobic interactions. These interactions should be considered in the design of an adsorbent. Furthermore, the adaptability to aqueous environment and excellent regeneration capacity of Fe@SiO₂NH₂ NPs makes these remediation materials promising for applications.

Three Silver(I) Coordination Polymers Based on Pyridyl Ligands and Auxiliary Carboxylic Ligands: Luminescence and Efficient Sensing Properties

Easily producible sensors for harmful industrial waste compounds are of significant interest for both human health and the environment. Three novel coordination polymers, [Ag(μ-aca)(μ₄-bztpy)_1/2] (1), [Ag(μ-bza)(μ-bpa)] (2), and [Ag₂(μ-aca)₂(μ-bpa)₂]·EtOH·2H₂O (3), were assembled in this study by reactions using Ag⁺ as a node with the pyridyl ligand 1,2,4,5-tetrakis(4-pyridyl)benzene (bztpy) or 9,10-bis(4-pyridyl)anthracene (bpa) and an auxiliary chelating carboxylic ligand. Single-crystal X-ray structural analyses revealed that compound 1 has a 3D framework consisting of 1D [Ag(aca)]_∞ chains and bztpy linkers, while 2 and 3 have 2D layered structures consisting of binuclear Ag-carboxylate units and bpa linkers, respectively. Topological studies revealed that 1 has a bbf topology, while 2 and 3 are 2D [4,4] rhombic grids. The compounds were further characterized by powder X-ray diffraction, IR, elemental analysis, thermogravimetric analysis, and a luminescence study. The solids of 1-3 exhibited intense photoluminescent emission with λ_em^max at ca. 493, 472, and 500 nm, respectively. Remarkably, due to their excellent framework stability, 1 and 2 can act as multiresponsive luminescent sensors for nitrobenzene, Fe³⁺, and Cr₂O₇^2- with a high selectivity and sensitivity ascribed to their quenching effect.

The Effect of Auxiliary Nitrogenated Linkers on the Design of New Cadmium-Based Coordination Polymers as Sensors for the Detection of Explosive Materials

Three new cadmium-based coordination polymers, denoted [Cd(hfipbb)(4,4'-bipy)] (CdPF-1), [Cd(hfipbb)(2,2'-bipy)] (CdPF-2), and [Cd(hfipbb)(1,10-phen)] (CdPF-3), have been hydrothermally synthesized by using the well-known V-shaped organic linker 4,4'-(hexafluoroisopropylidene)bis(benzoic acid) (H₂ hfipbb), together with different nitrogenated auxiliary linkers. Considering the d¹⁰ configuration of the transition metal selected, the luminescent properties for these CdPF-n materials were explored, finding that materials CdPF-2 and CdPF-3 act as excellent sensors in the detection of explosive nitro aromatic compounds. The photoluminescence properties of CdPF-2 and CdPF-3 revealed that significant and sensitive fluorescence quenching was observed toward NP (nitrophenol) for CdPF-2 and PA (picric acid) for CdPF-3 in MeOH suspensions.

A Eu(III)-based Metal Organic Framework: Selective Sensing of Picric Acid and Nursing Application Values On the Cerebral Edema Induced by Cerebral Hemorrhage Via Reducing the Coagulation Factor II Activity

A new three-dimensional lanthanide metal-organic framework (Ln-MOF), [Eu₄(L)₄(H₂O)₈]·10H₂O (1, H₃L = biphenyl-3'-nitro-3,4',5-tricarboxylic acid), has been constructed via solvothermal technology and its framework has been detected by the single-crystal X-ray diffraction and elemental analyses. Complex 1 with typical emission of Eu³⁺ ion represents dramatic luminescence quenching affect for picric acid (PA) and the linear Stern-Volmer plot was surveyed in the consistence, ranging from 0.05 to 0.15 mM (K_sv = 98,074 M^- 1). Its therapeutic effect of the compound on the cerebral edema caused by cerebral hemorrhage was estimated and the mechanism was explored. Possible binding interactions have been investigated by molecular docking simulations, from which the binding interactions are identified and the carboxyl oxygens are responsible for those identified interactions.

Function-Topology Relationship in the Catalytic Hydrolysis of a Chemical Warfare Simulant in Two Zr-MOFs

Owing to their high surface area, high concentration of active metal sites, and water stability, zirconium(VI)-based metal-organic frameworks (Zr-MOFs) have shown excellent activity in the hydrolysis of organophosphorus nerve agents (OPNs). In this regard, for the first time, two topologically different Zr-MOFs (Zr-fcu-tmuc and Zr-bcu-tmuc, constructed from the same organic and inorganic building blocks; fcu=face-centered cubic, bcu=body-centered cubic) have been rationally chosen to investigate the effect of network topology on the catalytic hydrolysis of the nerve agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP). A remarkable enhancement in the hydrolysis rate of DMNP was observed with Zr-bcu-tmuc, reducing the half-life more than three-fold compared with Zr-fcu-tmuc. Greater accessibility of the active Zr^VI sites in the 8-connected bcu net compared with the 12-connected fcu leads to a faster hydrolysis of DMNP on Zr-bcu-tmuc. Interestingly, the higher activity of Zr-bcu-tmuc was also confirmed by its higher fluorescence sensitivity towards DMNP (limit of detection (LOD)=0.557 μm) compared with Zr-fcu-tmuc (LOD=1.09 μm). The results show that controlling the desired topology of Zr-MOFs is a useful strategy for improving their performance in the detection and catalytic detoxification of OPNs.

Aggregation-directed High Fidelity Sensing of Picric Acid by a Perylenediimide-based Luminogen

Widespread use of picric acid (PA) in chemical industries and deadly explosives poses dreadful impact on all living creatures as well as the natural environment and has raised global concerns that necessitate the development of fast and efficient sensing platforms. To address this issue, herein, we report a perylenediimide-peptide conjugate, PDI-1, for detection of PA in methanol. The probe displays typical aggregation caused quenching (ACQ) behaviour and exhibits a fluorescence "turn-off" sensory response towards PA which is unaffected by the presence of other interfering nitroaromatic compounds. The sensing mechanism involves PA induced aggregation of the probe into higher order tape like structures which leads to quenching of emission. The probe possesses a low detection limit of 5.6 nM or 1.28 ppb and a significantly high Stern-Volmer constant of 6.87×10⁴  M^-1 . It also exhibits conducting properties in the presence of PA vapours and thus represents a prospective candidate for vapour phase detection of PA. This is, to the best of our knowledge, the first example of a perylenediimide based probe that demonstrates extremely specific, selective and sensitive detection of PA and thus grasps the potential for application in practical scenarios.

Preparation of sulfur-doped carbon quantum dots from lignin as a sensor to detect Sudan I in an acidic environment

To achieve a rapid and facile quantitative evaluation of Sudan I illegally added in ketchup, fluorescent carbon quantum dots with excellent stability in acidic environments are required as the actual pH value of ketchup is close to 4.0. In this paper, we developed a green approach to prepare sulfur-doped carbon quantum dots (SCQDs) via hydrothermal treatment of lignin, isolated from pre-hydrolysis liquor, in sulfuric acid solution. The resultant SCQDs from lignin possessed sulfur-containing groups, which exhibited excellent fluorescence with a quantum yield up to 13.5% and good stability in acidic environments with a wide pH range of 0-5.0. Therefore, the SCQDs were successfully employed as a sensor to detect Sudan I in acidic solutions with excellent selectivity and sensitivity. The linear range for Sudan I was 0-40 μM, while the limit of detection was 0.12 μM. In addition, the fluorescent indicator paper functionalized with SCQDs also showed outstanding selectivity to Sudan I. The proposed SCQD sensing system not only displayed application potential for quantitative evaluation of Sudan I dye in practical samples, but also provided a way to convert lignin-based waste into highly valued nanoscale materials.