Mechanism of the Phospha‐Wittig–Horner Reaction

A novel access to phosphanylidene-phosphorane complexes via P-donor substitution and a detailed bonding analysis

Phospha-Wittig reagents such as phosphanylidene-phosphoranes and their transition metal complexes are of great interest as sources of P1 building blocks but the access is still limited. Herein, we describe a new access to phosphanylidene-phosphorane complexes starting from the N-methylimidazole-to-phosphinidene complex adduct. The complexes were studied electrochemically and theoretically, also with respect to their 31P NMR data, and the P-P bonds were evaluated by various DFT-derived descriptors.

Cationic Phosphinidene as a Versatile P1 Building Block: [LC-P]+ Transfer from Phosphonio-Phosphanides [LC-P-PR3]+ and Subsequent LC Replacement Reactions (LC = N-Heterocyclic Carbene)

Cationic imidazoliumyl(phosphonio)-phosphanides [LC-P-PR3]+ (1a-e+, LC = 4,5-dimethyl-1,3-diisopropylimidazolium-2-yl; R = alkyl, aryl) are obtained via the nucleophilic fragmentation of tetracationic tetraphosphetane [(LC-P)4][OTf]4 (2[OTf]4) with tertiary phosphanes. They act as [LC-P]+ transfer reagents in phospha-Wittig-type reactions, when converted with various thiocarbonyls, giving unprecedented cationic phosphaalkenes [LC-P═CR2]+ (5a-f[OTf]) or phosphanides [LC-P-CR(NR2')]+ (6a-d[OTf]). Theoretical calculations suggest that three-membered cyclic thiophosphiranes are crucial intermediates of this reaction. To test this hypothesis, treatment of [LC-P-PPh3]+ with phosphaalkenes, that are isolobal to thioketones, permits the isolation of diphosphirane salts 11a,b[OTf]. Furthermore, preliminary studies suggest that the cationic phosphaalkene [LC-P═CPh2]+ may be employed to access rare examples of η2-P═C π-complexes with Pd0 and Pt0 when treated with [Pd(PPh3)4] and [Pt(PPh3)3] for which analogous complexes of neutral phosphaalkenes are scarce. The versatility of [LC-P]+ as a valuable P1 building block was showcased in substitution reactions of the transferred LC-substituent using nucleophiles. This is demonstrated through the reactions of 5a[OTf] and 6c[OTf] with Grignard reagents and KNPh2, providing a convenient, high-yielding access to MesP═CPh2 (16) and otherwise difficult-to-synthesize 1,3-diphosphetane 17 and P-aminophosphaalkenes.

Real scenario of metal ion sensor: is conjugated polymer helpful to detect hazardous metal ion

Metal ions from natural and anthropogenic sources cause pollution to society and the environment is major concern in the present scenario. The deposition and contamination of metal ions in soil and water affect the biogeochemical cycles. Thus, it threatens the everyday life of living and non-living organisms. Reviews on the detection of metal ions through several techniques (Analytical methods, electrochemical techniques, and sensors) and materials (Nanoparticles, carbon dots (quantum dots), polymers, chiral molecules, metal-organic framework, carbon nanotubes, etc.) are addressed separately in the present literature. This review reveals the advantages and disadvantages of the techniques and materials for metal ion sensing with crucial factors. Furthermore, it focus on the capability of conjugated polymers (CPs) as metal ion sensors able to detect/sense hazardous metal ions from environmental samples. Six different routes can synthesize this type of CPs to get specific properties and better metal ion detecting capability in vast research areas. The metal ion detection by CP is time-independent, simple, and low cost compared to other materials/techniques. This review outlines recent literature on the conjugated polymer for cation, anion, and dual ion sensors. Over the last half decades published articles on the conjugated polymer are discussed and compared.

Metathesis of P=C Bonds Catalyzed by N-Heterocyclic Carbenes

The catalytic metathesis of C=C bonds is a textbook reaction that has no parallel in the widely studied area of multiple bonds involving heavier p-block elements. A high-yielding P=C bond metathesis of phosphaalkenes (ArP=CPh₂ , Ar=Mes, o-Tol, Ph) has been discovered that is catalyzed by N-heterocyclic carbenes (NHC=Me₂ IMe, Me₂ Iⁱ Pr). The products are cyclic oligomers formally derived from ArP=PAr [i. e. cyclo-(ArP)_n ; n=3, 4, 5, 6] and Ph₂ C=CPh₂ . Preliminary mechanistic studies of this remarkable transformation have established NHC=PAr (Ar=Mes, o-Tol, Ph) as key phosphinidene transfer agents. In addition, novel cyclic intermediates, such as, cyclo-(ArP)₂ CPh₂ and cyclo-(ArP)₄ CPh₂ have also been observed. This work represents a rare application of non-metal-based catalysts for transformations involving main-group elements.

Design, synthesis, biological evaluation, and molecular docking of new benzofuran and indole derivatives as tubulin polymerization inhibitors

Microtubules and the mitotic spindle have become an important target for cancer treatment due to their critical role in cell division. In this work, a novel series of benzofuran and indole derivatives were designed and synthesized, to be evaluated as tubulin polymerization inhibitors. 2-Acetylbenzofuran derivatives 1a,b and 3-acetylindole 1c were condensed with Wittig reagents 2a-d and Wittig-Horner reagents 3a-e to afford the respective 2-ethylidene derivatives 5a-j and 7a-e. Also, iminomethylene triphenylphosphine (2e) reacted with 1a,b to afford benzofuran-2-ylethylidene aniline derivatives 6a,b. In addition, compounds 1a,b reacted with trialkylphosphites 4a-c to give 1:1 adduct for which the Oxaphospholo[4,3-b]benzofuran-7-yl)diazene derivatives 8a-f, were assigned. The possible reactions mechanisms were discussed and structural reasoning for the new compounds were based upon spectroscopic data. Their antiproliferative activities against two cell lines namely, HepG2 and MCF7 cells were then evaluated. It was found that the benzofuran compounds 5b, 6a, and 8c exhibited the strongest antiproliferative activities against both cell lines compared to doxorubicin. By studying the mechanism of action, compound 6a showed good inhibition of tubulin polymerization which leads to mitotic spindle formation disruption, cell cycle arrest in the G2/M phase, and apoptosis of HepG2 cells. A conducted docking study confirmed the in vitro results indicating that compound 6a fitted properly at the colchicine binding site of tubulin. Based on these findings, compound 6a can be considered as a promising anticancer candidate that can be subjected for further development as a tubulin polymerization inhibitor for treating liver and breast cell carcinoma.

New Reactivity Patterns in 3H‐Phosphaallene Chemistry [Aryl‐P=C=C(H)‐ t Bu]: Hydroboration of the C=C Bond, Deprotonation and Trimerisation

3H‐Phosphaallenes, R−P=C=C(H)C−R’ (3), are accessible in a multigram scale on a new and facile route and show a fascinating chemical reactivity. BH₃(SMe₂) and 3 a (R=Mes*, R’=tBu) afforded by hydroboration of the C=C bonds of two phosphaallene molecules an unprecedented borane (7) with the B atom bound to two P=C double bonds. This compound represents a new FLP based on a B and two P atoms. The increased Lewis acidity of the B atom led to a different reaction course upon treatment of 3 a with H₂B‐C₆F₅(SMe₂). Hydroboration of a C=C bond of a first phosphaallene is followed in a typical FLP reaction by the coordination of a second phosphaallene molecule via B−C and P−B bond formation to yield a BP₂C₂ heterocycle (8). Its B−P bond is short and the B‐bound P atom has a planar surrounding. Treatment of 3 a with tBuLi resulted in deprotonation of the β‐C atom of the phosphaallene (9). The Li atom is bound to the P atom as demonstrated by crystal structure determination, quantum chemical calculations and reactions with HCl, Cl‐SiMe₃ or Cl‐PtBu₂. The thermally unstable phosphaallene Ph−P=C=C(H)‐tBu gave a unique trimeric secondary product by P−P, P−C and C−C bond formation. It contains a P₂C₄ heterocycle and was isolated as a W(CO)₄ complex with two P atoms coordinated to W (15).

3H-Phosphaallenes Revisited: Facile Synthesis by Hydroalumination of Alkynylphosphines and β-Elimination, Stability and Trapping of Transient Species by Coordination to Transition Metal Atoms

A facile method for the efficient synthesis of 3H-phosphaallenes, R-P=C=C(H)-R', is presented, which comprises treatment of dialkynylphosphines with dialkylaluminium hydrides (hydroalumination) and elimination of aluminium alkynides from intermediate alkenyl-alkynylphosphines. The stability of the phosphaallenes depends on steric shielding by the substituents at phosphorus (aryl or CH(SiMe₃ )₂ groups). Only supermesityl compounds are persistent at room temperature in solution. This simple method starting with easily accessible dialkynylphosphines and commercially available aluminium hydrides (HAlEt₂ , HAliBu₂ ) allows the generation of transient species, which were trapped by coordination to transition metals. The η¹ -coordination via a P-W bond was observed for tungsten, while the side-on coordination via the P=C bond resulted with platinum. Decomposition of the mesityl derivative yielded an unprecedented product, which may be formed by 1,3-H shift to the P atom, hydrophosphination of the P=C bond of a second phosphaallene and formation of a P-P bond.

Oxaphospholes and bisphospholes from phosphinophosphonates and α,β-unsaturated ketones

The reaction of a {W(CO)5 }-stabilized phosphinophosphonate 1, (CO)5 WPH(Ph)P(O)(OEt)2 , with ethynyl- (2 a-f) and diethynylketones (7-11, 18, and 19) in the presence of lithium diisopropylamide (LDA) is examined. Lithiated 1 undergoes nucleophilic attack in the Michael position of the acetylenic ketones, as long as this position is not sterically encumbered by bulky (iPr)3 Si substituents. Reaction of all other monoacetylenic ketones with lithiated 1 results in the formation of 2,5-dihydro-1,2-oxaphospholes 3 and 4. When diacetylenic ketones are employed in the reaction, two very different product types can be isolated. If at least one (Me)3 Si or (Et)3 Si acetylene terminus is present, as in 7, 8, and 19, an anionic oxaphosphole intermediate can react further with a second equivalent of ketone to give cumulene-decorated oxaphospholes 14, 15, 24, and 25. Diacetylenic ketones 10 and 11, with two aromatic acetylene substituents, react with lithitated 1 to form exclusively ethenyl-bridged bisphospholes 16 and 17. Mechanisms that rationalize the formation of all heterocycles are presented and are supported by DFT calculations. Computational studies suggest that thermodynamic, as well as kinetic, considerations dictate the observed reactivity. The calculated reaction pathways reveal a number of almost isoenergetic intermediates that follow after ring opening of the initially formed oxadiphosphetane. Bisphosphole formation through a carbene intermediate G is greatly favored in the presence of phenyl substituents, whereas the formation of cumulene-decorated oxaphospholes is more exothermic for the trimethylsilyl-containing substrates. The pathway to the latter compounds contains a 1,3-shift of the group that stems from the acetylene terminus of the ketone substrates. For silyl substituents, the 1,3-shift proceeds along a smooth potential energy surface through a transition state that is characterized by a pentacoordinated silicon center. In contrast, a high-lying transition state TS(E'-F')R=Ph of 37 kcal mol(-1) is found when the substituent is a phenyl group, thus explaining the experimental observation that aryl-terminated diethynylketones 10 and 11 exclusively form bisphospholes 16 and 17.