Defektmanipulierte Metall-organische Gerüste

Recent Advances in the Catalytic Conversion of Methane to Methanol: From the Challenges of Traditional Catalysts to the Use of Nanomaterials and Metal-Organic Frameworks

Methane and carbon dioxide are the main contributors to global warming, with the methane effect being 25 times more powerful than carbon dioxide. Although the sources of methane are diverse, it is a very volatile and explosive gas. One way to store the energy content of methane is through its conversion to methanol. Methanol is a liquid under ambient conditions, easy to transport, and, apart from its use as an energy source, it is a chemical platform that can serve as a starting material for the production of various higher-value products. Accordingly, the transformation of methane to methanol has been extensively studied in the literature, using traditional catalysts as different types of zeolites. However, in the last few years, a new generation of catalysts has emerged to carry out this transformation with higher conversion and selectivity, and more importantly, under mild temperature and pressure conditions. These new catalysts typically involve the use of a highly porous supporting material such as zeolite, or more recently, metal-organic frameworks (MOFs) and graphene, and metallic nanoparticles or a combination of different types of nanoparticles that are the core of the catalytic process. In this review, recent advances in the porous supports for nanoparticles used for methane oxidation to methanol under mild conditions are discussed.

Ionothermal Synthesis of Metal-Organic Frameworks Using Low-Melting Metal Salt Precursors

Metal-organic frameworks (MOFs) are porous, crystalline materials constructed from organic linkers and inorganic nodes with myriad potential applications in chemical separations, catalysis, and drug delivery. A major barrier to the application of MOFs is their poor scalability, as most frameworks are prepared under highly dilute solvothermal conditions using toxic organic solvents. Herein, we demonstrate that combining a range of linkers with low-melting metal halide (hydrate) salts leads directly to high-quality MOFs without added solvent. Frameworks prepared under these ionothermal conditions possess porosities comparable to those prepared under traditional solvothermal conditions. In addition, we report the ionothermal syntheses of two frameworks that cannot be prepared directly under solvothermal conditions. Overall, the user-friendly method reported herein should be broadly applicable to the discovery and synthesis of stable metal-organic materials.

Low Loading and High Activity of Platinum Oxide Nanoclusters Formed by Defect Engineering of a Metal-Organic Framework for Formaldehyde Degradation

A distinct platinum oxide nanocluster (PtO_x ) was developed, consisting of only Pt-O bond by a defect-engineered Al metal-organic framework (MOF) (BIT-72) with superior formaldehyde (HCHO) degradation activity and stability. With only 0.015 wt % Pt loading, PtO_x @BIT-72-DE could degrade HCHO with 100 % conversion continuously for at least 200 h under HCHO concentration of 25 ppm and gas hourly space velocity of 60000 mL g^-1  h^-1 at room temperature. Furthermore, its specific rate (446 mmol_HCHO  g_Pt ^-1  h^-1 ) was higher than for traditional Pt-based catalysts and single-atom Pt catalysts. Moreover, the cost of PtO_x @BIT-72-DE was lowered to 0.0769 $ g^-1 , which could significantly facilitate its commercial application. This study demonstrates the promising potential of MOFs in the design of HCHO degradation catalysts.

Highly Active La(III)-Based Metal-Organic Framework as a Heterogeneous Lewis Acid Catalyst for Friedel-Crafts Alkylation

In this study, a novel La(III)-based two-dimensional (2D) metal-organic framework, [La_2/3 (qptca)_1/2 ] (referred to as SLX-2), from LaCl₃ and 1,1' : 4',1'' : 4'',1''' : 4''',1''''-quinquephenyl]-2,2'',2'''',5''-tetracarboxylic acid (H₄ qptca) was synthesized by conventional solvothermal method and thoroughly characterized by using X-ray single-crystal diffraction, powder X-ray diffraction, and thermogravimetric analyses. The 2D SLX-2 features a unique lanthanum center exposed to the skeleton and was used as an efficient Lewis acid catalyst for the Friedel-Crafts alkylation of indole and pyrrole with β-nitrostyrene along with a wide substrate scope, giving the desired products in good-to-high yields under the optimal reaction conditions. Furthermore, the catalyst was used for twenty cycles, with nearly no effect on its activity, and the reaction was heterogeneous in nature. Moreover, compared to the previous hydrogen-bond-donating MOF catalysts for such alkylation reactions, SLX-2 showed an excellent stability toward harsh acidic and basic environment, and gave comparable catalytic activities.

Flexibility Control of Two-Dimensional Coordination Polymers by Crystal Morphology: Water Adsorption and Thermal Expansion

Layer flexibility in two-dimensional coordination polymers (2D-CPs) contributes to several functional materials as it results in anisotropic structural response to external stimuli. Chemical modification is a common technique for modifying layer structures. This study demonstrates that crystal morphology of a cyanide-bridged 2D-CP of type [Mn(salen)]₂ [ReN(CN)₄ ] (1) consisting of flexible undulating layers significantly impacts the layer configuration and assembly. Nanoplates of 1 showed an in-plane contraction of layers with a longer interlayer distance compared to the micrometer-sized rod-type particles. These effects by crystal morphology on the structure of the 2D-CP impacted the structural flexibility, resulting in dual-functional changes: the enhancement of the sensitivity of structural transformation to water adsorption and modification of anisotropic thermal expansion of 1. Moreover, the nanoplates incorporated new adsorption sites within the layers, resulting in the uptake of an additional water molecule compared to the micrometer-sized rods.

Enhancing the Catalytic Activity of MOF-808 Towards Peptide Bond Hydrolysis through Synthetic Modulations

The performance of MOFs in catalysis is largely derived from structural features, and much work has focused on introducing structural changes such as defects or ligand functionalisation to boost the reactivity of the MOF. However, the effects of different parameters chosen for the synthesis on the catalytic reactivity of the resulting MOF remains poorly understood. Here, we evaluate the role of metal precursor on the reactivity of Zr-based MOF-808 towards hydrolysis of the peptide bond in the glycylglycine model substrate. In addition, the effect of synthesis temperature and duration has been investigated. Surprisingly, the metal precursor was found to have a large influence on the reactivity of the MOF, surpassing the effect of particle size or number of defects. Additionally, we show that by careful selection of the Zr-salt precursor and temperature used in MOF syntheses, equally active MOF catalysts could be obtained after a 20 minute synthesis compared to 24 h synthesis.

Experimental and Theoretical Study on the Interchange between Zr and Ti within the MIL-125-NH2 Metal Cluster

This study aims to investigate the effect of replacing Ti with Zr in the SBU of MIL-125-NH₂ . We were able to replace Ti with Zr in the mixed metal synthesis of MIL-125-NH₂ , for the first time. After experimentally confirming the consistency in their framework structure and comparing their morphology, we related the femtosecond light dynamics with photocatalytic CO₂ visible light conversion yield of the different variants in order to establish the composition-function relation in MIL-125 vis a vis CO₂ reduction. Introducing Zr to the system was found to cause structure defects due to missing linkers. The lifetime of the charge carriers for the mixed metal samples were shorter than that of the MIL-125-NH₂ . The study of CO₂ photocatalytic reduction under visible light indicated that the NH₂ group enhances the photocatalytic activity while the Zr incorporation inside the MIL framework introduces no significant improvements. In addition, the material systems were modelled and simulated through DFT calculations which concluded that the decrease of the photocatalytic activity is not related to the system electronic structure, insinuating that defects are the culprit.

Electron Beam Irradiation-Induced Formation of Defect-Rich Zeolites under Ambient Condition within Minutes

Zeolites are a well-known family of microporous aluminosilicate crystals with a wide range of applications. Their industrial synthetic method under hydrothermal condition requires elevated temperature and long crystallization time and is therefore quite energy-consuming. Herein, we utilize high-energy electron beam irradiation generated by an industrial accelerator as a distinct type of energy source to activate the formation reaction of Na-A zeolite. The initial efforts afford an attractive reaction process that can be achieved under ambient conditions and completed within minutes with almost quantitative yield, leading to notable energy saving of one order of magnitude compared to the hydrothermal reaction. More importantly, electron beam irradiation simultaneously exhibits an etching effect during the formation of zeolite generating a series of crystal defects and additional pore windows that can be controlled by irradiation dose. These observations give rise to significantly enhanced surface area and heavy metal removal capabilities in comparison with Na-A zeolite synthesized hydrothermally. Finally, we show that this method can be applied to many other types of zeolites.

Porous Covalent Organic Polymers for Efficient Fluorocarbon-Based Adsorption Cooling

Adsorption-based cooling is an energy-efficient renewable-energy technology that can be driven using low-grade industrial waste heat and/or solar heat. Here, we report the first exploration of fluorocarbon adsorption using porous covalent organic polymers (COPs) for this cooling application. High fluorocarbon R134a equilibrium capacities and unique overall linear-shaped isotherms are revealed for the materials, namely COP-2 and COP-3. The key role of mesoporous defects on this unusual adsorption behavior was demonstrated by molecular simulations based on atomistic defect-containing models built for both porous COPs. Analysis of simulated R134a adsorption isotherms for various defect-containing atomistic models of the COPs shows a direct correlation between higher fluorocarbon adsorption capacities and increasing pore volumes induced by defects. Combined with their high porosities, excellent reversibility, fast kinetics, and large operating window, these defect-containing porous COPs are promising for adsorption-based cooling applications.

Tuning the Properties of MOF-808 via Defect Engineering and Metal Nanoparticle Encapsulation

Defect engineering and metal encapsulation are considered as valuable approaches to fine-tune the reactivity of metal-organic frameworks. In this work, various MOF-808 (Zr) samples are synthesized and characterized with the final aim to understand how defects and/or platinum nanoparticle encapsulation act on the intrinsic and reactive properties of these MOFs. The reactivity of the pristine, defective and Pt encapsulated MOF-808 is quantified with water adsorption and CO2 adsorption calorimetry. The results reveal strong competitive effects between crystal morphology and missing linker defects which in turn affect the crystal morphology, porosity, stability, and reactivity. In spite of leading to a loss in porosity, the introduction of defects (missing linkers or Pt nanoparticles) is beneficial to the stability of the MOF-808 towards water and could also be advantageously used to tune adsorption properties of this MOF family.

An Efficient Interfacial Synthesis of Two-Dimensional Metal-Organic Framework Nanosheets for Electrochemical Hydrogen Peroxide Production

Two-dimensional (2D) metal-organic framework nanosheets (MOF NSs) play a vital role in catalysis, but the most preparation is ultrasonication or solvothermal. Herein, a liquid-liquid interfacial synthesis method has been developed for the efficient fabrication of a series of 2D Ni MOF NSs. The active sites could be modulated by readily tuning the ratios of metal precursors and organic linkers (R_M/L ). The Ni MOF NSs display highly R_M/L dependent activities towards 2e oxygen reduction reaction (ORR) to hydrogen peroxide (H₂ O₂ ), where the Ni MOF NSs with the R_M/L of 6 exhibit the optimal near-zero overpotential, ca. 98 % H₂ O₂ selectivity and production rate of ca. 80 mmol g_cat ^-1  h^-1 in 0.1 M KOH. As evidenced by X-ray absorption fine structure spectroscopy, the coordination environment of active sites changed from saturation to unsaturation, and the partially unsaturated metal atoms are crucial to create optimal sites for enhancing the electrocatalysis.

Spatio-Chemical Heterogeneity of Defect-Engineered Metal-Organic Framework Crystals Revealed by Full-Field Tomographic X-ray Absorption Spectroscopy

The introduction of structural defects in metal-organic frameworks (MOFs), often achieved through the fractional use of defective linkers, is emerging as a means to refine the properties of existing MOFs. These linkers, missing coordination fragments, create unsaturated framework nodes that may alter the properties of the MOF. A property-targeted utilization of this approach demands an understanding of the structure of the defect-engineered MOF. We demonstrate that full-field X-ray absorption near-edge structure computed tomography can help to improve our understanding. This was demonstrated by visualizing the chemical heterogeneity found in defect-engineered HKUST-1 MOF crystals. A non-uniform incorporation and zonation of the defective linker was discovered, leading to the presence of clusters of a second coordination polymer within HKUST-1. The former is suggested to be responsible, in part, for altered MOF properties; thereby, advocating for a spatio-chemically resolved characterization of MOFs.

Structures and Structural Evolution of Sublayer Surfaces of Metal-Organic Frameworks

The structural characterization of sublayer surfaces of MIL-101 is reported by low-dose spherical aberration-corrected high-resolution transmission electron microscopy (HRTEM). The state-of-the-art microscopy directly images atomic/molecular configurations in thin crystals from charge density projections, and uncovers the structures of sublayer surfaces and their evolution to stable surfaces regulated by inorganic Cr₃ (μ₃ -O) trimers. This study provides compelling evidence of metal-organic frameworks (MOFs) crystal growth via the assembly of sublayer surfaces and has important implications in understanding the crystal growth and surface-related properties of MOFs.

Function and Application of Defect Chemistry in High-Capacity Electrode Materials for Li-Based Batteries

Current commercial Li-based batteries are approaching their energy density limitation, yet still cannot satisfy the energy density demand of the high-end devices. Hence, it is critical to developing advanced electrode materials with high specific capacity. However, these electrode materials are facing challenges of severe structural degradation and fast capacity fading. Among various strategies, constructing defects in electrode materials holds great promise in addressing these issues. Herein, we summarize a series of significant defect engineering in the high-capacity electrode materials for Li-based batteries. The detailed retrospective on defects specification, function mechanism, and corresponding application achievements on these electrodes are discussed from the view of point, line, planar, volume defects. Defect engineering can not only stabilize the structure and enhance electric/ionic conductivity, but also act as active sites to improve the ionic storage and bonding ability of electrode materials to Li metal. We hope this review can spark more perspectives on evaluating high-energy-density Li-based batteries.

Water Oxidation at Neutral pH using a Highly Active Copper-Based Electrocatalyst

The sluggish kinetics of the oxygen evolution reaction (OER) at the anode severely limit hydrogen production at the cathode in water splitting systems. Although electrocatalytic systems based on cheap and earth-abundant copper catalysts have shown promise for water oxidation under basic conditions, only very few examples with high overpotential can be operated under acidic or neutral conditions, even though hydrogen evolution in the latter case is much easier. This work presents an efficient and robust Cu-based molecular catalyst, which self-assembles as a periodic film from its precursors under aqueous conditions on the surface of a glassy carbon electrode. This film catalyzes the OER under neutral conditions with impressively low overpotential. In controlled potential electrolysis, a stable catalytic current of 1.0 mA cm^-2 can be achieved at only 2.0 V (vs. RHE) and no significant decrease in the catalytic current is observed even after prolonged bulk electrolysis. The catalyst displays first-order kinetics and a single site mechanism for water oxidation with a TOF (k_cat ) of 0.6 s^-1 . DFT calculations on of the periodic Cu(TCA)₂ (HTCA=1-mesityl-1H-1,2,3-triazole-4-carboxylic acid) film reveal that TCA defects within the film create Cu^I active sites that provide a low overpotential route for OER, which involves Cu^I , Cu^II -OH, Cu^III =O and Cu^II -OOH intermediates and is enabled at a potential of 1.54 V (vs. RHE), requiring an overpotential of 0.31 V. This corresponds well with an overpotential of approximately 0.29 V obtained experimentally for the grown catalytic film after 100 CV cycles at pH 6. However, to reach a higher current density of 1 mA cm^-2 , an overpotential of 0.72 V is required.

Interplay of Electronic and Steric Effects to Yield Low-Temperature CO Oxidation at Metal Single Sites in Defect-Engineered HKUST-1

In contrast to catalytically active metal single atoms deposited on oxide nanoparticles, the crystalline nature of metal-organic frameworks (MOFs) allows for a thorough characterization of reaction mechanisms. Using defect-free HKUST-1 MOF thin films, we demonstrate that Cu+ /Cu2+ dimer defects, created in a controlled fashion by reducing the pristine Cu2+ /Cu2+ pairs of the intact framework, account for the high catalytic activity in low-temperature CO oxidation. Combining advanced IR spectroscopy and density functional theory we propose a new reaction mechanism where the key intermediate is an uncharged O2 species, weakly bound to Cu+ /Cu2+ . Our results reveal a complex interplay between electronic and steric effects at defect sites in MOFs and provide important guidelines for tailoring and exploiting the catalytic activity of single metal atom sites.

Rational Design of a N,S Co-Doped Supermicroporous CoFe-Organic Framework Platform for Water Oxidation

It remains a challenge to rational design of a new metal-organic framework (MOF) as highly efficient direct electrocatalysts for the oxygen evolution reaction (OER). Herein, we developed a simple and effective method to explore a new pillared-layered MOF with syringic acid as a promising OER electrocatalyst. The isostructural mono-, heterobimetallic MOF and N,S co-doped MOF by mixing thiourea were quickly synthesized in a high yield under solvothermal condition. Moreover, the optimized N,S co-doped MOF exhibits the lowest overpotential of 254 mV at 10 mA cm^-2 on a glass carbon electrode and a small Tafel slope of 50 mV dec^-1 , especially, this catalyst also possesses long-term electrochemical durability for at least 16 h. According to the characterization, the incorporation of N and S atoms into this heterobimetallic CoFe-based MOF could modify its pore structure, tune the electronic structure, accordingly, improve the mass and electron transportation, and facilitate the formation of active species, as a consequence, the improved activity of this new N,S co-doped MOF for OER should be mainly be ascribed to higher electrochemical activation toward the active species via in situ surface modification during the OER process.

Multivariate Modulation of the Zr MOF UiO-66 for Defect-Controlled Combination Anticancer Drug Delivery

Metal-organic frameworks (MOFs) are emerging as leading candidates for nanoscale drug delivery, as a consequence of their high drug capacities, ease of functionality, and the ability to carefully engineer key physical properties. Despite many anticancer treatment regimens consisting of a cocktail of different drugs, examples of delivery of multiple drugs from one MOF are rare, potentially hampered by difficulties in postsynthetic loading of more than one cargo molecule. Herein, we report a new strategy, multivariate modulation, which allows incorporation of up to three drugs in the Zr MOF UiO-66 by defect-loading. The drugs are added to one-pot solvothermal synthesis and are distributed throughout the MOF at defect sites by coordination to the metal clusters. This tight binding comes with retention of crystallinity and porosity, allowing a fourth drug to be postsynthetically loaded into the MOFs to yield nanoparticles loaded with cocktails of drugs that show enhancements in selective anticancer cytotoxicity against MCF-7 breast cancer cells in vitro. We believe that multivariate modulation is a significant advance in the application of MOFs in biomedicine, and anticipate the protocol will also be adopted in other areas of MOF chemistry, to easily produce defective MOFs with arrays of highly functionalised pores for potential application in gas separations and catalysis.

Multi-Spectroscopic Interrogation of the Spatial Linker Distribution in Defect-Engineered Metal-Organic Framework Crystals: The [Cu3 (btc)2-x (cydc)x ] Showcase

In the past few years, defect-engineered metal-organic frameworks (DEMOFs) have been studied due to the plethora of textural, catalytic, or magnetic properties that can be enhanced by carefully introducing defect sites into the crystal lattices of MOFs. In this work, the spatial distribution of two different non-defective and defective linkers, namely 1,3,5-benzenetricarboxylate (BTC) and 5-cyano-1,3-benzenedicarboxylate (CYDC), respectively, has been studied in different DEMOF crystals of the HKUST-1 topology. Raman micro-spectroscopy revealed a nonhomogeneous distribution of defect sites within the [Cu3 (btc)2-x (cydc)x ] crystals, with the CYDC linker incorporated into defect-rich or defect-free areas of selected crystals. Additionally, advanced bulk techniques have shed light on the nature of the copper species, which is highly dynamic and directly affects the reactivity of the copper sites, as shown by probe molecule FTIR spectroscopy. Furthermore, electron microscopy revealed the effect of co-crystallizing CYDC and BTC on the crystal size and the formation of mesopores, further corroborated by X-ray scattering analysis. In this way we have demonstrated the necessity of utilizing micro-spectroscopy along with a whole array of bulk spectroscopic techniques to fully describe multicomponent metal-organic frameworks.

Metal-Organic Frameworks for the Exploitation of Distance between Active Sites in Efficient Photocatalysis

Discoveries of the accurate spatial arrangement of active sites in biological systems and cooperation between them for high catalytic efficiency are two major events in biology. However, precise tuning of these aspects is largely missing in the design of artificial catalysts. Here, a series of metal-organic frameworks (MOFs) were used, not only to overcome the limit of distance between active sites in bio-systems, but also to unveil the critical role of this distance for efficient catalysis. A linear correlation was established between photocatalytic activity and the reciprocal of inter active-site distance; a smaller distance led to higher activity. Vacancies created at selected crystallographic positions of MOFs promoted their photocatalytic efficiency. MOF-525-J33 with 15.6 Å inter active-site distance and 33 % vacancies exhibited unprecedented high turnover frequency of 29.5 h^-1 in visible-light-driven acceptorless dehydrogenation of tetrahydroquinoline at room temperature.

Construction of Hierarchical Metal-Organic Frameworks by Competitive Coordination Strategy for Highly Efficient CO2 Conversion

Hierarchical porosity and functionalization help to fully make use of metal-organic frameworks (MOFs) for their diverse applications. Herein, a simple strategy is reported to construct hierarchically porous MOFs through a competitive coordination method using tetrafluoroborate (M(BF₄ )_x , where M is metal site) as both functional sites and etching agents. The resulting MOFs have in situ formed defect-mesopores and functional sites without sacrificing their structure stability. The formation mechanism of the defect-mesopores is elucidated by a combination of experimental and first-principles calculation method, indicating the general feasibility of this new approach. Compared with the original microporous counterparts, the new hierarchical MOFs exhibit superior adsorption for the bulky dye molecules and catalytic performance for the CO₂ conversion attributed to their specific hierarchical pore structures.

MOF Decomposition and Introduction of Repairable Defects Using a Photodegradable Strut

Photoswitchable components can modulate the properties of metal organic frameworks (MOFs); however, photolabile building blocks remain underexplored. A new strut NPDAC (2-nitro-1,4-phenylenediacetic acid) that undergoes photodecarboxylation has been prepared and incorporated into a MOF, using post-synthetic linker exchange (PSLE) from the structural analogue containing PDAC (p-phenylenediacetic acid). Irradiation of NPDAC-MOF leads to MOF decomposition and concomitant formation of amorphous material. In addition to complete linker exchange, MOFs containing a mixture of PDAC and NPDAC can be obtained through partial linker exchange. In NPDAC30-MOF, which contains approximately 30 % NPDAC, the MOF retains crystallinity after irradiation, but the MOF contains defect sites consistent with loss of decarboxylated NPDAC linkers. The defect sites can be repaired by exposure to additional PDAC or NPDAC linkers at a much faster rate than the initial exchange process. The photoremoval and replacement process may lead to a more general approach to customizable MOF structures.

Water-Induced Breaking of the Coulombic Ordering in a Room-Temperature Ionic Liquid Metal Complex

Control of ion arrangements in ionic liquids represents a major challenge owing to the presence of the predominant coulombic interactions between cationic and anionic ion species that forms the coulombic ordering. Here, water-induced ion rearrangement in a room-temperature ionic liquid (RT-IL) metal complex, (1-ethyl-3-methylimidazolium)₂ [MnN(CN)₄ ], is demonstrated through coordinative interactions between anions. Solidification occurred, which was associated with the formation of a "separated" structure consisting of cation columns and anionic cyanide-bridged one-dimensional coordination polymers. The energy diagram is in accord with the resultant RT-IL incorporating mononuclear [MnN(CN)₄ ]^2- molecules being a kinetic phase stabilized by inter-ion repulsions of the anionic divalent metal complex moieties. Water acts to decrease the coulombic interactions, including repulsion, giving rise to breaking of the coulombic ordering arising from coordination bond formation in the IL phase.