Metall-Ligand-Kooperation

An NNN Pd(II) pincer complex with 1,1-diaminoazine: a versatile catalyst for acceptorless dehydrogenative coupling reactions

An azine-based, non-palindromic, neutral NNN-pincer ligand was synthesised in a single step with an yield of 85%. The palladation of the ligand, using Pd(OAc)2, was performed in acetonitrile at room temperature to obtain the pincer complex in 88% yield through a simple, cost-effective, and straightforward synthetic procedure. The structure of the complex was confirmed by 1H NMR, 13C NMR, FT-IR, and mass spectrometry. The variable temperature NMR spectra revealed the stability of the complex even at higher temperatures, a characteristic feature of pincer complexes. The generated complex proved to be a versatile catalyst for Acceptorless Dehydrogenative Coupling (ADC) to synthesize N-heterocycles: (i) 1,2-disubstituted benzimidazoles, (ii) 2-phenylquinolines, (iii) 2-phenylquinoxalines and (iv) 2-phenylquinazolinones. Since the side products of the reactions are H2O and H2 gas, the catalysis can be considered as a green catalytic process. Quantum chemical calculations indicated the participation of a possible nitrene-imide conversion process during the Metal-Ligand Cooperation (MLC) in ADC reactions.

Molecular Dihydrogen Activation by (C5Me5)M/N (M=Rh, Ir) Transition Metal Frustrated Lewis Pairs: Reversible Proton Migration to, and Proton Abstraction from, the C5Me5 Ligand

The masked transition-metal frustrated Lewis pairs [Cp*M(κ3N,N',N''-L)][SbF6] (Cp*=η5-C5Me5; M=Ir, 1, Rh, 2; HL=pyridinyl-amidine ligand) reversibly activate H2 under mild conditions rendering the hydrido derivatives [Cp*MH(κ2N,N'-HL)][SbF6] observed as a mixture of the E and Z isomers at the amidine C=N bond (M=Ir, 3Z, 3E; M=Rh, 4Z, 4E). DFT calculations indicate that the formation of the E isomers follows a Grotthuss type mechanism in the presence of water. A mixture of Rh(I) isomers of formula [(Cp*H)Rh(κ2N,N'-HL)][SbF6] (5 a-d) is obtained by reductive elimination of Cp*H from 4. The formation of 5 a-d was elucidated by means of DFT calculations. Finally, when 2 reacts with D2, the Cp* and Cp*H ligands of the resulting rhodium complexes 4 and 5, respectively, are deuterated as a result of a reversible hydrogen abstraction from the Cp* ligand and D2 activation at rhodium.

Cooperative Nitrile Coordination Using Nickel and a Boron-Containing Secondary Coordination Sphere

Metal-ligand cooperation has emerged as a versatile tool for substrate activation in chemical reactivity. Herein, we provide the synthesis and characterization of a monoboranyl-containing analogue of the ubiquitous bulky diphosphine ligand, 1,2-bis(di-tert-butylphosphino)ethane, whose reactivity has been examined using nickel. Together, the pairing of nickel and boron provides a platform that allows for the cooperative coordination of organonitriles, giving unusual examples of intermolecularly bound dinickelacycles.

Diverse Cooperative Reactivity at a Square Planar Aluminium Complex and Catalytic Reduction of CO2

The use of a sterically demanding pincer ligand to prepare an unusual square planar aluminium complex is reported. Due to the constrained geometry imposed by the ligand scaffold, this four-coordinate aluminium centre remains Lewis acidic and reacts via differing metal-ligand cooperative pathways for activating ketones and CO₂ . It is also a rare example of a single-component aluminium system for the catalytic reduction of CO₂ to a methanol equivalent at room temperature.

Oxidations of N-coordinated Arsinidene and Stibinidene by Substituted Quinones: A Remarkable Follow-Up Reactivity

The reactivity of pnictinidenes [2-(DippN=CH)-6-(DippNHCH₂ )C₆ H₃ ]E (where E=As (1) or Sb (2)) toward substituted ortho- and para-quinones is reported. The central pnictogen atom is easily oxidized by ortho-quinones closing five-membered EO₂ C₂ ring. The oxidized antimony derivatives are stable species, while in the case of arsenic compounds the hydrogen of the pendant amino NHCH₂ group cleaves one newly formed As-O bonds leading to the closure of a new azaarsole ring. Furthermore, a heating of these arsenic heterocycles resulted in a C-H bond activation at the NCH₂ group involved in this heterocycle followed by a reductive elimination of corresponding catechols and arsinidene [2,6-(DippN=CH)C₆ H₃ ]As. Using of para-quinones, resulted in the oxidation of the central atom with a concomitant hydrogen migration from NHCH₂ group even in the case of the antimony derivatives. The reductive elimination of hydroquinones is in this case feasible for all compounds. Studied compounds were characterized by multi-nuclear NMR, IR and Raman spectroscopy and single-crystal X-ray diffraction analysis. The theoretical study focusing the key compounds and reactions is also included.

Efficient Hydrogenation of N-Heterocycles Catalyzed by NNP-Manganese(I) Pincer Complexes at Ambient Temperature

Manganese-catalyzed hydrogenation reactions have aroused widespread interest in recent years. Among the catalytic systems described, especially PNP- and NNP-Mn pincer catalysts have been reported for the hydrogenation of aldehydes, ketones, nitriles, aldimines and esters. Furthermore, NNP-Mn pincer compounds are efficient catalysts for the hydrogenolysis of less reactive amides, ureas, carbonates, and carbamates. Herein, the synthesis and application of specific imidazolylaminophosphine ligands and the corresponding Mn pincer complexes are described. These new catalysts have been characterized and studied by a combination of experimental and theoretical investigations, and their catalytic activities have been tested in several hydrogenation reactions with good to excellent performance. Especially, the reduction of N-heterocycles can be performed under very mild conditions.

Catalytic Mechanisms of Transfer Hydrogenation of Azobenzene with Ammonia Borane by Pincer Bismuth Complex: Crucial Role of C=N Functional Group on the Pincer Ligand

Transfer hydrogenation of azobenzene with ammonia borane mediated by pincer bismuth complex 1 was systematically investigated through density functional theory calculations. An unusual metal-ligand cooperation mechanism was disclosed, in which the saturation/regeneration of the C=N functional group on the pincer ligand plays an essential role. The reaction is initiated by the hydrogenation of the C=N bond (saturation) with ammonia borane to afford 3^CN , which is the rate-determining step with Gibbs energy barrier (ΔG^≠ ) and Gibbs reaction energy (ΔG) of 25.6 and -7.3 kcal/mol, respectively. 3^CN is then converted to a Bi-H intermediate through a water-bridged pathway, which is followed up with the transfer hydrogenation of azobenzene to produce the final product N,N'-diphenylhydrazine and regenerate the catalyst. Finally, the catalyst could be improved by substituting the phenyl group for the tert-butyl group on the pincer ligand, where the ΔG^≠ value (rate-determining step) decreases to 24.0 kcal/mol.

Ligand-Promoted [Pd]-Catalyzed α-Alkylation of Ketones through a Borrowing-Hydrogen Approach

A new class of palladium complexes bearing bidentate 2-hydroxypyridine based ligands have been prepared and fully characterized. The applications of these new complexes towards ketone alkylation reactions with alcohols through a metal-ligand cooperative borrowing-hydrogen (BH) process were demonstrated.

E-selective Semi-hydrogenation of Alkynes under Mild Conditions by a Diruthenium Hydride Complex

The synthesis, characterization and catalytic activity of a new class of diruthenium hydrido carbonyl complexes bound to the tBu PNNP expanded pincer ligand is described. Reacting tBu PNNP with two equiv of RuHCl(PPh3 )3 (CO) at 140 °C produces an insoluble air-stable complex, which was structurally characterized as [Ru2 (tBu PNNP)H(μ-H)Cl(μ-Cl)(CO)2 ] (1) using solid-state NMR, IR and X-ray absorption spectroscopies and follow-up reactivity. A reaction with KOtBu results in deprotonation of a methylene linker to produce [Ru2 (tBu PNNP* )H(μ-H)(μ-OtBu)(CO)2 ] (3) featuring a partially dearomatized naphthyridine core. This enables metal-ligand cooperative activation of H2 analogous to the mononuclear analogue, [Ru(tBu PNP*)H(CO)]. In contrast to the mononuclear system, the bimetallic analogue 3 catalyzes the E-selective semi-hydrogenation of alkynes at ambient temperature and atmospheric H2 pressure with good functional group tolerance. Monitoring the semi-hydrogenation of diphenylacetylene by 1 H NMR spectroscopy shows the intermediacy of Z-stilbene, which is subsequently isomerized to the E-isomer. Initial findings into the mode of action of this system are provided, including the spectroscopic characterization of a polyhydride intermediate and the isolation of a deactivated species with a partially hydrogenated naphthyridine backbone.

Redox Biocatalysis: Quantitative Comparisons of Nicotinamide Cofactor Regeneration Methods

Enzymatic processes, particularly those capable of performing redox reactions, have recently been of growing research interest. Substrate specificity, optimal activity at mild temperatures, high selectivity, and yield are among the desirable characteristics of these oxidoreductase catalyzed reactions. Nicotinamide adenine dinucleotide (phosphate) or NAD(P)H-dependent oxidoreductases have been extensively studied for their potential applications like biosynthesis of chiral organic compounds, construction of biosensors, and pollutant degradation. One of the main challenges associated with making these processes commercially viable is the regeneration of the expensive cofactors required by the enzymes. Numerous efforts have pursued enzymatic regeneration of NAD(P)H by coupling a substrate reduction with a complementary enzyme catalyzed oxidation of a co-substrate. While offering excellent selectivity and high total turnover numbers, such processes involve complicated downstream product separation of a primary product from the coproducts and impurities. Alternative methods comprising chemical, electrochemical, and photochemical regeneration have been developed with the goal of enhanced efficiency and operational simplicity compared to enzymatic regeneration. Despite the goal, however, the literature rarely offers a meaningful comparison of the total turnover numbers for various regeneration methodologies. This comprehensive Review systematically discusses various methods of NAD(P)H cofactor regeneration and quantitatively compares performance across the numerous methods. Further, fundamental barriers to enhanced cofactor regeneration in the various methods are identified, and future opportunities are highlighted for improving the efficiency and sustainability of commercially viable oxidoreductase processes for practical implementation.

Ligand-Enabled Disproportionation of 1,2-Diphenylhydrazine at a PV -Center

We present herein the synthesis of a nearly square-pyramidal chlorophosphorane supported by the tetradentate bis(amidophenolate) ligand, N,N'-bis(3,5-di-tert-butyl-2-phenoxy)-1,2-phenylenediamide. After chloride abstraction the resulting phosphonium cation efficiently promotes the disproportionation of 1,2-diphenylhydrazine to aniline and azobenzene. Mechanistic studies, spectroscopic analyses and theoretical calculations suggest that this unprecedented reactivity mode for PV -centres is induced by the high electrophilicity at the cationic PV -center, which originates from the geometry constraints imposed by the rigid pincer ligand, combined with the ability of the o-amidophenolate moieties to act as electron reservoir. This study illustrates the promising role of cooperativity between redox-active ligands and phosphorus for the design of organocatalysts able to promote redox processes.

Calix[4]pyrrolato Aluminate Catalyzes the Dehydrocoupling of Phenylphosphine Borane to High Molar Weight Polymers

High molar weight polyphosphinoboranes represent materials with auspicious properties, but their preparation requires transition metal-based catalysts. Here, calix[4]pyrrolato aluminate is shown to induce the dehydropolymerization of phosphine boranes to high molar mass polyphosphinoboranes (up to Mn =43 000 Da). Combined GPC and 31 P DOSY NMR spectroscopic analyses, quantum chemical computations, and stoichiometric reactions disclose a P-H bond activation by the cooperative action of the square-planar aluminate and the electron-rich ligand framework. This first transition metal-free catalyst for P-B dehydrocoupling overcomes the problem of residual d-block metal impurities in the resulting polymers that might interfere with the reproducibility of the properties for this emerging class of inorganic materials.

Catalytic Hydrogenation of Epoxides to Alcohols

Atom-economical catalytic reactions are a highly enticing strategy because all atoms of the starting materials are incorporated into the products. Catalytic hydrogenation of epoxides to alcohols is an attractive and alternative protocol to other synthetic methodologies for the synthesis of alcohols from alkenes. In the last two decades, catalytic hydrogenation of epoxides to alcohols has made remarkable progress in chemical synthesis. In this review, an overview of the catalytic hydrogenation of both terminal and internal epoxides to the corresponding alcohols is presented. An outline of both homogeneous and heterogeneous hydrogenation of epoxides to the corresponding alcohols is provided. Moreover, the selectivity, efficiency, and the reaction mechanisms of these epoxide hydrogenation reactions are highlighted.

Acceptorless Dehydrogenation of Methanol to Carbon Monoxide and Hydrogen using Molecular Catalysts

The acceptorless dehydrogenation of methanol to carbon monoxide and hydrogen was investigated using homogeneous molecular complexes. Complexes of ruthenium and manganese comprising the MACHO ligand framework showed promising activities for this reaction. The molecular ruthenium complex [RuH(CO)(BH4 )(HN(C2 H4 PPh2 )2 )] (Ru-MACHO-BH) achieved up to 3150 turnovers for carbon monoxide and 9230 turnovers for hydrogen formation at 150 °C reaching pressures up to 12 bar when the decomposition was carried out in a closed vessel. Control experiments affirmed that the metal complex mediates the initial fast dehydrogenation of methanol to formaldehyde and methyl formate followed by subsequent slow decarbonylation. Depending on the catalyst and reaction conditions, the CO/H2 ratio in the gas mixture thus varies over a broad range from almost pure hydrogen to the stoichiometric limit of 1:2.

Tuning Ruthenium Carbene Complexes for Selective P-H Activation through Metal-Ligand Cooperation

The use of iminophosphoryl-tethered ruthenium carbene complexes to activate secondary phosphine P-H bonds is reported. Complexes of type [(p-cymene)-RuC(SO2 Ph)(PPh2 NR)] (with R = SiMe3 or 4-C6 H4 -NO2 ) were found to exhibit different reactivities depending on the electronics of the applied phosphine and the substituent at the iminophosphoryl moiety. Hence, the electron-rich silyl-substituted complex undergoes cyclometallation or shift of the imine moiety after cooperative activation of the P-H bond across the M=C linkage, depending on the electronics of the applied phosphine. Deuteration experiments and computational studies proved that cyclometallation is initiated by the activation process at the M=C bond and triggered by the high electron density at the metal in the phosphido intermediates. Consistently, replacement of the trimethylsilyl (TMS) group by the electron-withdrawing 4-nitrophenyl substituent allowed the selective cooperative P-H activation to form stable activation products.

Diphosphino-Functionalized 1,8-Naphthyridines: a Multifaceted Ligand Platform for Boranes and Diboranes

A 1,8-naphthyridine diphosphine (NDP) reacts with boron-containing Lewis acids to generate complexes featuring a number of different naphthyridine bonding modes. When exposed to diborane B2 Br4 , NDP underwent self-deprotonation to afford [NDP-B2 Br3 ]Br, an unsymmetrical diborane comprised of four fused rings. The reaction of two equivalents of monoborane BBr3 and NDP in a non-polar solvent provided the simple phosphine-borane adduct [NDP(BBr3 )2 ], which then underwent intramolecular halide abstraction to furnish the salt [NDP-BBr2 ][BBr4 ], featuring a different coordination mode from that of [NDP-B2 Br3 ]Br. Direct deprotonation of NDP by KHMDS or PhCH2 K generates mono- and dipotassium reagents, respectively. The monopotassium reagent reacts with one or half an equivalent of B2 (NMe2 )2 Cl2 to afford NDP-based diboranes with three or four amino substituents.

Bulky PNP ligands blocking metal-ligand cooperation allow for isolation of Ru(0), and lead to catalytically active Ru complexes in acceptorless alcohol dehydrogenation

We synthesized two 4Me-PNP ligands which block metal-ligand cooperation (MLC) with the Ru center and compared their Ru complex chemistry to their two traditional analogues used in acceptorless alcohol dehydrogenation catalysis. The corresponding 4Me-PNP complexes, which do not undergo dearomatization upon addition of base, allowed us to obtain rare, albeit unstable, 16 electron mono CO Ru(0) complexes. Reactivity with CO and H 2 allows for stabilization and extensive characterization of bis CO Ru(0) 18 electron and Ru(II) cis and trans dihydride species that were also shown to be capable of C(sp2)-H activation. Reactivity and catalysis are contrasted to non-methylated Ru(II) species, showing that an MLC pathway is not necessary, with dramatic differences in outcomes during catalysis between i Pr and t Bu PNP complexes within each of the 4Me and non-methylated backbone PNP series being observed. Unusual intermediates are characterized in one of the new and one of the traditional complexes, and a common catalysis deactivation pathway was identified.

Metal Effect Meets Volcano Plots: A DFT Study on Tris(phosphino)borane-Transition Metal Complexes Catalyzed H2 Activation

Bifunctional transition metal complexes are of particular interest in metal-ligand cooperative activation of small molecules. As a novel type of bifunctional catalyst, Lewis acid transition metal (LA-TM) complexes have attracted increasing interest in hydrogen activation and storage. To advance the catalyst design, herein the metal effect of LA-TM complexes on the hydrogen activation has been systematically studied with a series of tris(phosphino)borane (TPB) complexes with V, Cr, Mn, Fe, Co, and Ni as metal centers. The metal effect not only influences the mechanism of hydrogen activation, but also notably casts a volcano plot for the activity. TPB complexes of V, Cr, Mn, Fe, and Co tend to activate H₂ through a stepwise mechanism, while TPB-Ni prefers a synergetic mechanism for H₂ activation. More importantly, the metal effect significantly influences the activity of H₂ activation and the formation of the LA-H-TM bridging hydride. The trend of changes in the LA-H-TM structures, the second-order perturbation stabilization energies, and the Laplacian bond orders, along with different metals (from V to Ni), are all interestingly constitute volcano plots for the performance of TPB-TM complexes catalyzed H₂ activation. TPB-Mn and TPB-Fe are found to be the optimal catalysts among the discussed TPB-TM complexes. The volcano plots disclosed for the metal effects should be informative and instructive for homogeneous and heterogeneous LA-TM catalysts development.

Atypical and Asymmetric 1,3-P,N Ligands: Synthesis, Coordination and Catalytic Performance of Cycloiminophosphanes

Novel seven-membered cyclic imine-based 1,3-P,N ligands were obtained by capturing a Beckmann nitrilium ion intermediate generated in situ from cyclohexanone with benzotriazole, and then displacing it by a secondary phosphane under triflic acid promotion. These "cycloiminophosphanes" possess flexible non-isomerizable tetrahydroazepine rings with a high basicity; this sets them apart from previously reported iminophophanes. The donor strength of the ligands was investigated by using their P-κ1 - and P,N-κ2 -tungsten(0) carbonyl complexes, by determining the IR frequency of the trans-CO ligands. Complexes with [RhCp*Cl2 ]2 demonstrated the hemilability of the ligands, giving a dynamic equilibrium of κ1 and κ2 species; treatment with AgOTf gives full conversion to the κ2 complex. The potential for catalysis was shown in the RuII -catalyzed, solvent-free hydration of benzonitrile and the RuII - and IrI -catalyzed transfer hydrogenation of cyclohexanone in isopropanol. Finally, to enable access to asymmetric catalysts, chiral cycloiminophosphanes were prepared from l-menthone, as well as their P,N-κ2 -RhIII and a P-κ1 -RuII complexes.

Cooperativity in Transition Metal Tetrylene Complexes

Cooperative reactivity between transition metals and ligands, or between two metals, has created significant opportunities for the development of new transformations that would be difficult to carry out with a single metal. Here we explore cooperativity between transition metals and divalent heavier group 14 elements (tetrylenes), a less-explored facet of the field of cooperativity. Tetrylenes combine their strong σ-donor properties with an empty p-orbital that can accept electron density. This ambiphilicity has allowed them to form metal tetrylene and metallotetrylene complexes that place a reactive site adjacent to the metal. We have selected examples to demonstrate what has been achieved so far regarding cooperative reactivity, as this already spans metal-, tetrylene- or multi-site-centred bond cleavage, cycloaddition, migration, metathesis, and insertion. We also highlight some challenges that need to be overcome for this cooperativity to make it to catalysis.

A Proton-Responsive Pyridyl(benzamide)-Functionalized NHC Ligand on Ir Complex for Alkylation of Ketones and Secondary Alcohols

A Cp*Ir(III) complex (1) of a newly designed ligand L¹ featuring a proton-responsive pyridyl(benzamide) appended on N-heterocyclic carbene (NHC) has been synthesized. The molecular structure of 1 reveals a dearomatized form of the ligand. The protonation of 1 with HBF₄ in tetrahydrofuran gives the corresponding aromatized complex [Cp*Ir(L¹ H)Cl]BF₄ (2). Both compounds are characterized spectroscopically and by X-ray crystallography. The protonation of 1 with acid is examined by ¹ H NMR and UV-vis spectra. The proton-responsive character of 1 is exploited for catalyzing α-alkylation of ketones and β-alkylation of secondary alcohols using primary alcohols as alkylating agents through hydrogen-borrowing methodology. Compound 1 is an effective catalyst for these reactions and exhibits a superior activity in comparison to a structurally similar iridium complex [Cp*Ir(L² )Cl]PF₆ (3) lacking a proton-responsive pendant amide moiety. The catalytic alkylation is characterized by a wide substrate scope, low catalyst and base loadings, and a short reaction time. The catalytic efficacy of 1 is also demonstrated for the syntheses of quinoline and lactone derivatives via acceptorless dehydrogenation, and selective alkylation of two steroids, pregnenolone and testosterone. Detailed mechanistic investigations and DFT calculations substantiate the role of the proton-responsive ligand in the hydrogen-borrowing process.

Access to and Reactivity of Fe0 , Fe-I , FeI , and FeII PCcarbene P Pincer Complexes

Despite their promising metal-ligand cooperative reactivity, PC_carbene P pincer ligands are rarely reported for first-row transition-metal centres. Using a dehydration methodology, we report access to an Fe⁰ PC_carbene P pincer complex (1) that proceeds via an isolated α-hydroxylalkyl hydrido complex (3). Reversible carbonyl migration to the carbene position in 1 is found to allow coordination chemistry and E-H bond addition (E=H, B, Cl) across the iron-carbene linkage, representing a unique mechanism for metal-ligand cooperativity. The PC_carbene P pincer ligand is also found to stabilize formal Fe^II , Fe^I , and Fe^-I oxidation states, as demonstrated with synthesis and characterization of the complexes [11-X][BAr^F ₂₀ ] (X=Br, I), 12, and K[13]. Compound K[13] is found to be highly reactive, and abstracts hydrogen from a range of aliphatic C-H sources. Computational analysis by DFT suggests that the formal Fe^I and Fe^-I complexes contain significant carbene radical character. The ability of the PC_carbene P ligand scaffold to partake in metal-ligand cooperativity and to support a range of iron oxidation states renders it as potentially useful in many catalytic applications.

Dioxygen Activation and Pyrrole α-Cleavage with Calix[4]pyrrolato Aluminates: Enzyme Model by Structural Constraint

The present work describes the reaction of triplet dioxygen with the porphyrinogenic calix[4]pyrrolato aluminates to alkylperoxido aluminates in high selectivity. Multiconfigurational quantum chemical computations disclose the mechanism for this spin‐forbidden process. Despite a negligible spin–orbit coupling constant, the intersystem crossing (ISC) is facilitated by singlet and triplet state degeneracy and spin–vibronic coupling. The formed peroxides are stable toward external substrates but undergo an unprecedented oxidative pyrrole α‐cleavage by ligand aromatization/dearomatization‐initiated O−O σ‐bond scission. A detailed comparison of the calix[4]pyrrolato aluminates with dioxygen‐related enzymology provides insights into the ISC of metal‐ or cofactor‐free enzymes. It substantiates the importance of structural constraint and element–ligand cooperativity for the functions of aerobic life.

Iron(II)-Catalyzed Aerobic Biomimetic Oxidation of Amines using a Hybrid Hydroquinone/Cobalt Catalyst as Electron Transfer Mediator

Herein we report the first FeII -catalyzed aerobic biomimetic oxidation of amines. This oxidation reaction involves several electron transfer steps and is inspired by biological oxidation in the respiratory chain. The electron transfer from the amine to molecular oxygen is aided by two coupled catalytic redox systems, which lower the energy barrier and improve the selectivity of the oxidation reaction. An iron hydrogen transfer complex was utilized as the substrate-selective dehydrogenation catalyst along with a bifunctional hydroquinone/cobalt Schiff base complex as a hybrid electron transfer mediator. Various primary and secondary amines were oxidized in air to their corresponding aldimines or ketimines in good to excellent yield.

Boron-Ligand Cooperation: The Concept and Applications

The term boron-ligand cooperation was introduced to describe a specific mode of action by which certain metal-free systems activate chemical bonds. The main characteristic of this mode of action is that one covalently bound substituent at the boron is actively involved in the bond activation process and changes to a datively bound ligand in the course of the bond activation. Within this review, how the term boron-ligand cooperation evolved is reflected on and examples of bond activation by boron-ligand cooperation are discussed. It is furthermore shown that systems that operate via boron-ligand cooperation can complement the reactivity of classic intramolecular frustrated Lewis pairs and applications of this new concept for metal-free catalysis are summarized.

Homogeneous Reforming of Aqueous Ethylene Glycol to Glycolic Acid and Pure Hydrogen Catalyzed by Pincer-Ruthenium Complexes Capable of Metal-Ligand Cooperation

Glycolic acid is a useful and important α-hydroxy acid that has broad applications. Herein, the homogeneous ruthenium catalyzed reforming of aqueous ethylene glycol to generate glycolic acid as well as pure hydrogen gas, without concomitant CO₂ emission, is reported. This approach provides a clean and sustainable direction to glycolic acid and hydrogen, based on inexpensive, readily available, and renewable ethylene glycol using 0.5 mol % of catalyst. In-depth mechanistic experimental and computational studies highlight key aspects of the PNNH-ligand framework involved in this transformation.