CO 2 Activation and Hydrogenation by PtH n − Cluster Anions

Giant NLO response and deep ultraviolet transparency of dual (alkali/alkaline earth) metals doped C6O6Li6 electrides

The designing of new materials having outstanding nonlinear optical (NLO) response is much needed for use in latest optics. Herein, the geometric, electronic and NLO properties of alkali and alkaline earth metals doped C6O6Li6 (alk-C6O6Li6-alkearth, alkearth = Ca, Mg, Be and alk = K, Na, Li) electrides is studied via quantum chemical approach. The interaction energies (Eint) are examined to illustrate their thermodynamic stability. The strong interaction energy of -39.99 kcal mol-1 is observed for Ca-C6O6Li6-Li electride in comparison to others. Frontier molecular orbitals (FMOs) energy gap of considered complexes is changed due to the electronic density shifting between metals and C6O6Li6 surface, which notifies the semi conducting properties of these electrides. The FMOs isodensities and natural bond orbital (NBO) charge analysis are performed to justify charge transfer between dopants and complexant. UV-Visible study also confirmed the application of these electrides as deep ultra-violet laser devices. NLO response is studied through calculation of first hyperpolarizability (βo). The highest βo value of 1.68 × 105 au is calculated for Mg-C6O6Li6-K electride. NLO response is further rationalized by three- and two-level models approach.

Catalytic Co-Conversion of CH4 and CO2 Mediated by Rhodium-Titanium Oxide Anions RhTiO2. Angew Chem Int Ed Engl 2021;60:13788-13792. [PMID: 33890352 PMCID: PMC8251526 DOI: 10.1002/anie.202103808]

Catalytic co‐conversion of methane with carbon dioxide to produce syngas (2 H₂+2 CO) involves complicated elementary steps and almost all the elementary reactions are performed at the same high temperature conditions in practical thermocatalysis. Here, we demonstrate by mass spectrometric experiments that RhTiO₂⁻ promotes the co‐conversion of CH₄ and CO₂ to free 2 H₂+CO and an adsorbed CO (CO_ads) at room temperature; the only elementary step that requires the input of external energy is desorption of CO_ads from the RhTiO₂CO⁻ to reform RhTiO₂⁻. This study not only identifies a promising active species for dry (CO₂) reforming of methane to syngas, but also emphasizes the importance of temperature control over elementary steps in practical catalysis, which may significantly alleviate the carbon deposition originating from the pyrolysis of methane.

Simultaneous Functionalization of Methane and Carbon Dioxide Mediated by Single Platinum Atomic Anions

Mass spectrometric analysis of the anionic products of interaction among Pt^-, methane, and carbon dioxide shows that the methane activation complex, H₃C-Pt-H^-, reacts with CO₂ to form [H₃C-Pt-H(CO₂)]^-. Two hydrogenation and one C-C bond coupling products are identified as isomers of [H₃C-Pt-H(CO₂)]^- by a synergy between anion photoelectron spectroscopy and quantum chemical calculations. Mechanistic study reveals that both CH₄ and CO₂ are activated by the anionic Pt atom and that the successive depletion of the negative charge on Pt drives the CO₂ insertion into the Pt-H and Pt-C bonds of H₃C-Pt-H^-. This study represents the first example of the simultaneous functionalization of CH₄ and CO₂ mediated by single atomic anions.

Magic Clusters PtMg2,3 H5 - Facilitated by Local σ-Aromaticity

The concept of local aromaticity has been successfully utilized in understanding the stability of certain atomic clusters. However, all the skeleton atoms in these clusters are covered by at least one local aromatic feature, collectively making the multiple local aromaticities coexist globally. Herein we show the robustness of local aromaticity as a tool for the discovery of novel magic clusters: not all of the skeleton atoms need to be covered by an aromatic feature to make the cluster magic. In this study, the PtMg_2,3 H₅ ^- cluster anions are generated by a unique high-current pulsed discharge ion source and found to be magic numbers using mass spectrometry. Photoelectron spectroscopy and calculations confirm that only the PtH₄ ^2- kernels in these clusters are locally aromatic. Based on these results, we propose that local aromaticity can be gainfully utilized as a new potential magic rule in the search for magic numbers.

Photoassisted Selective Steam and Dry Reforming of Methane to Syngas Catalyzed by Rhodium-Vanadium Bimetallic Oxide Cluster Anions at Room Temperature

Photoassisted steam reforming and dry (CO₂ ) reforming of methane (SRM and DRM) at room temperature with high syngas selectivity have been achieved in the gas-phase catalysis for the first time. The catalysts used are bimetallic rhodium-vanadium oxide cluster anions of Rh₂ VO_1-3 ^- . Both the oxidation of methane and reduction of H₂ O/CO₂ can take place efficiently in the dark while the pivotal step to govern syngas selectivity is photo-excitation of the reaction intermediates Rh₂ VO_2,3 CH₂ ^- to specific electronically excited states that can selectively produce CO and H₂ . Electronic excitation over Rh₂ VO_2,3 CH₂ ^- to control the syngas selectivity is further confirmed from the comparison with the thermal excitation of Rh₂ VO_2,3 CH₂ ^- , which leads to diversity of products. The atomic-level mechanism obtained from the well-controlled cluster reactions provides insight into the process of selective syngas production from the photocatalytic SRM and DRM reactions over supported metal oxide catalysts.

A highly active copper catalyst for the hydrogenation of carbon dioxide to formate under ambient conditions

Carbon dioxide (CO2) is an important reactant and can be used for the syntheses of various types of industrially important chemicals. Hence, investigation concerning the conversion of CO2 into valuable energy-rich chemicals is an important and current topic in molecular catalysis. Recent research on molecular catalysts has led to improved rates for conversion of CO2 to energy-rich products such as formate, but the catalysts based on first-row transition metals are underdeveloped. Copper(i) complexes containing the 1,1'-bis(di-tert-butylphosphino) ferrocene ligand were found to promote the catalytic hydrogenation of CO2 to formate in the presence of DBU as the base, where the catalytic conversion of CO2via hydrogenation is achieved using in situ gaseous H2 (granulated tin metal and concentrated HCl) to produce valuable energy-rich chemicals, and therefore it is a promising, safe and simple strategy to conduct reactions under ambient pressure at room temperature. Towards this goal, we report an efficient copper(i) complex based catalyst [CuI(dtbpf)] to achieve ambient-pressure CO2 hydrogenation catalysis for generating the formate salt (HCO2-) with turnover number (TON) values of 326 to 1.065 × 105 in 12 to 48 h of reaction at 25 °C to 80 °C. The outstanding catalytic performance of [CuI(dtbpf)] makes it a potential candidate for realizing the large-scale production of formate by CO2 hydrogenation.

Direct Conversion of Methane with Carbon Dioxide Mediated by RhVO3 - Cluster Anions

Direct conversion of methane with carbon dioxide to value-added chemicals is attractive but extremely challenging because of the thermodynamic stability and kinetic inertness of both molecules. Herein, the first dinuclear cluster species, RhVO₃ ^- , has been designed to mediate the co-conversion of CH₄ and CO₂ to oxygenated products, CH₃ OH and CH₂ O, in the temperature range of 393-600 K. The resulting cluster ions RhVO₃ CO^- after CH₃ OH formation can further desorb the [CO] unit to regenerate the RhVO₃ ^- cluster, leading to the successful establishment of a catalytic cycle for methanol production from CH₄ and CO₂ (CH₄ +CO₂ →CH₃ OH+CO). The exceptional activity of Rh-V dinuclear oxide cluster (RhVO₃ ^- ) identified herein provides a new mechanism for co-conversion of two very stable molecules CH₄ and CO₂ .

Selective Activation of the C-H Bond in Methane by Single Platinum Atomic Anions

Mass spectrometric analysis of the anionic products of interaction between platinum atomic anions, Pt^- , and methane, CH₄ and CD₄ , in a collision cell shows the preferred generation of [PtCH₄ ]^- and [PtCD₄ ]^- complexes and a low tendency toward dehydrogenation. [PtCH₄ ]^- is shown to be H-Pt-CH₃ ^- by a synergy between anion photoelectron spectroscopy and quantum chemical calculations, implying the rupture of a single C-H bond. The calculated reaction pathway accounts for the observed selective activation of methane by Pt^- . This study presents the first example of methane activation by a single atomic anion.

Unambiguous hydrogenation of CO2 by coinage-metal hydride anions: an intuitive idea based on in silico experiments

Coinage metal hydride anions, especially AgH⁻, can effectively and deterministically hydrogenate CO₂ to HCO₂⁻.

IR Signature of Size-Selective CO2 Activation on Small Platinum Cluster Anions, Ptn - (n=4-7)

Infrared multiple photon dissociation spectroscopy (IR-MPD) has been employed to determine the nature of CO₂ binding to size-selected platinum cluster anions, Pt_n ^- (n=4-7). Interpreted in conjunction with density functional theory simulations, the results illustrate that the degree of CO₂ activation can be controlled by the size of the metal cluster, with dissociative activation observed on all clusters n≥5. Of potential practical significance, in terms of the use of CO₂ as a useful C1 feedstock, CO₂ is observed molecularly-bound, but highly activated, on the Pt₄ ^- cluster. It is trapped behind a barrier on the reactive potential energy surface which prevents dissociation.

Coupling of Methane and Carbon Dioxide Mediated by Diatomic Copper Boride Cations

The use of CH₄ and CO₂ to produce value-added chemicals via direct C-C coupling is a challenging chemistry problem because of the inertness of these two molecules. Herein, mass spectrometric experiments and high-level quantum-chemical calculations have identified the first diatomic species (CuB⁺ ) that can couple CH₄ with CO₂ under thermal collision conditions to produce ketene (H₂ C=C=O), an important intermediate in synthetic chemistry. The order to feed the reactants (CH₄ and CO₂ ) is important and CH₄ should be firstly fed to produce the C₂ product. Molecular-level mechanisms including control of product selectivity have been revealed for coupling of CH₄ with CO₂ under mild conditions.

Designer Metallic Acceptor-Containing Halogen Bonds: General Strategies

Being electrostatic interactions in nature, hydrogen bonding (HB) and halogen bonding (XB) are considered to be two parallel worlds. In principle, all the applications that HB have could also be applied to XB. However, there has been no report on an anionic, metallic XB acceptor, but metal anions have been observed to be good HB acceptors. This missing mosaic piece of XB theory is because common metal anions are reactive for XB donors. In view of this, two strategies are proposed for designing metallic acceptor-containing XB using ab initio calculations. The first one is to utilize a metal cluster anion with a high electron detachment energy, such as the superatom, Al₁₃^- as the XB acceptor. The second strategy is to design a ligand-passivated/protected metal core that can maintain the negative charge; several exotic clusters, such as PtH₅^- , PtZnH₅^- , and PtMgH₅^- , are used as examples. Based on these two strategies, it is anticipated that more metallic acceptor-containing XBs will be discovered.

Formation of Gas-Phase Formate in Thermal Reactions of Carbon Dioxide with Diatomic Iron Hydride Anions

The hydrogenation of carbon dioxide involves the activation of the thermodynamically very stable molecule CO₂ and formation of a C-H bond. Herein, we report that HCO₂^- and CO can be formed in the thermal reaction of CO₂ with a diatomic metal hydride species, FeH^- . The FeH^- anions were produced by laser ablation, and the reaction with CO₂ was analyzed by mass spectrometry and quantum-chemical calculations. Gas-phase HCO₂^- was observed directly as a product, and its formation was predicted to proceed by facile hydride transfer. The mechanism of CO₂ hydrogenation in this gas-phase study parallels similar behavior of a condensed-phase iron catalyst.