Understanding of Strain Effects in the Electrochemical Reduction of CO 2 : Using Pd Nanostructures as an Ideal Platform

Strain-Controlled Galvanic Synthesis of Platinum Icosahedral Nanoframes and Their Enhanced Catalytic Activity toward Oxygen Reduction

The unique strain distribution on the surface of a Pd icosahedral nanocrystal is leveraged to control the sites for oxidation and reduction involved in the galvanic replacement reaction. Specifically, Pd is oxidized and dissolved from the center of each {111} facet due to its tensile strain, while the Pt(II) precursor adsorbs onto the vertices and edges featuring a compressive strain, followed by surface reduction and conformal deposition of the Pt atoms. Once the galvanic reaction is initiated, the {111} facets become more vulnerable to oxidation and dissolution, as the vertices and edges are protected by the deposited Pt atoms. The site-selected galvanic reaction naturally results in the formation of Pt icosahedral nanoframes covered by compressively strained {111} facets, which show enhanced catalytic activity and durability toward oxygen reduction relative to commercial Pt/C.

High performance electrochemical CO2 reduction over Pd decorated cobalt containing nitrogen doped carbon

Efficient electrocatalytic CO2 reduction reaction (eCO2RR) to various products, such as carbon monoxide (CO), is crucial for mitigating greenhouse gas emissions and enabling renewable energy storage. In this article, we introduce Pd nanoparticles which are deposited over in-house synthesized nitrogen doped tubular carbon (NC) whose ends are blocked with cobalt oxide (CoOx). This composite material is denoted as Pd@CoOx/NC. Among the series of synthesized electrocatalysts, the optimum ratio (Pd@CoOx/NC1) within this category exhibits exceptional performance, manifesting an 81% faradaic efficiency (FE) for CO generation which was quantitatively measured using a gas chromatograph. This remarkable efficiency can be attributed to several scientific factors. Firstly, the presence of Pd nanoparticles provides active sites for CO2 reduction. Secondly, the NC offer enhanced electrical conductivity and facilitate charge transfer during the reaction. Thirdly, the CoOx capping at the ends of the NC serves to stabilize the catalyst, favoring the formation of CO. The remarkable selectivity of the catalyst is further confirmed by the qualitative CO detection method using PdCl2 strips. Pd@CoOx/NC1 exhibits a high current density of 55 mA cm-2 and a low overpotential of 251 mV, outperforming Pd decorated multiwalled carbon nanotubes (Pd@MWCNTs) which shows a higher overpotential of 481 mV. Pd@CoOx/NC1 shows long-term stability at different potentials and rapid reaction kinetics. These findings highlight Pd@CoOx/NC1 as promising CO2 reduction catalysts, with implications for sustainable energy conversion techniques.

Structure-driven tuning of catalytic properties of core-shell nanostructures

The annual increase in demand for renewable energy is driving the development of catalysis-based technologies that generate, store and convert clean energy by splitting and forming chemical bonds. Thanks to efforts over the last two decades, great progress has been made in the use of core-shell nanostructures to improve the performance of metallic catalysts. The successful preparation and application of a large number of bimetallic core-shell nanocrystals demonstrates the wide range of possibilities they offer and suggests further advances in this field. Here, we have reviewed recent advances in the synthesis and study of core-shell nanostructures that are promising for catalysis. Particular attention has been paid to the structural tuning of the catalytic properties of core-shell nanostructures and to theoretical methods capable of describing their catalytic properties in order to efficiently search for new catalysts with desired properties. We have also identified the most promising areas of research in this field, in terms of experimental and theoretical studies, and in terms of promising materials to be studied.

Subsurface Hydride Formation Leads to Slow Surface Adsorption Processes on a Pd(111) Single-Crystal Electrode in Acidic Electrolytes

Palladium is one of the most important catalysts due to its widespread use in heterogeneous catalysis and electrochemistry. However, an understanding of the electrochemical processes and interfacial phenomena at Pd single-crystal electrodes/electrolytes is still scarce. In this work, the electrochemical behavior of the Pd(111) electrode was studied by the combination of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in different acidic electrolytes, namely, sulfuric acid, perchlorate acid, methane sulfonic acid, and hydrofluoric acid. An analysis of CV profiles shows the strong adsorption of all anions at low electrode potential, partially overlapping with underpotential deposited hydrogen (UPD-H), leading to the appearance of a pair of sharp peaks in what would be considered the "hydrogen region". All anions studied (HSO4-, ClO4-, CH3SO3-, and F-) adsorb specifically and interact with (or effectively block) the surface-adsorbed hydroxyl phase formed on the Pd(111) terrace at higher potentials. Strikingly, the scan rate-dependent results show that the process of anion adsorption and desorption is a kinetically rather slow step. EIS measurements show that the exact mechanism of this slow anion ad/desorption process actually stems from (sub)surface phenomena: the direct hydrogen insertion into Pd lattice (hydrogen subsurface absorption) commences from ca. 0.40 V and leads to the formation of (subsurface) Pd hydrides (PdHx). We argue that the subsurface hydrogen phase significantly alters the work function and thereby the kinetics of the anion adsorption and desorption processes, leading to irreversible peaks in the voltammetry. This precise understanding is important in guiding further fundamental work on Pd single crystals and will be crucial to advancing the eventual design of optimized Pd electrocatalysts.

Turing structuring with multiple nanotwins to engineer efficient and stable catalysts for hydrogen evolution reaction

Low-dimensional nanocrystals with controllable defects or strain modifications are newly emerging active electrocatalysts for hydrogen-energy conversion and utilization; however, a crucial challenge remains in insufficient stability due to spontaneous structural degradation and strain relaxation. Here we report a Turing structuring strategy to activate and stabilize superthin metal nanosheets by incorporating high-density nanotwins. Turing configuration, realized by constrained orientation attachment of nanograins, yields intrinsically stable nanotwin network and straining effects, which synergistically reduce the energy barrier of water dissociation and optimize the hydrogen adsorption free energy for hydrogen evolution reaction. Turing PtNiNb nanocatalyst achieves 23.5 and 3.1 times increase in mass activity and stability index, respectively, compared against commercial 20% Pt/C. The Turing PtNiNb-based anion-exchange-membrane water electrolyser with a low Pt mass loading of 0.05 mg cm-2 demonstrates at least 500 h stability at 1000 mA cm-2, disclosing the stable catalysis. Besides, this new paradigm can be extended to Ir/Pd/Ag-based nanocatalysts, illustrating the universality of Turing-type catalysts.

Coupling Ni-Cu atomic pair to promote CO2 electroreduction with near-unity CO selectivity

The electrocatalytic reduction of CO₂ towards CO is one of the most desirable routines to reduce atmospheric CO₂ concentration and maintain a global carbon balance. In this work, a novel porous NiCu-embedded ZIF-derived N-doped carbon nanoparticle (NiCu@NCNPs) catalyst has been identified as an active, highly selective, stable, and cost-effective catalyst in CO₂ reduction. A CO selectivity as high as 100% has been achieved on NiCu@NCNPs which is the highest reported to date. The particle current density of CO on NiCu@NCNPs is around 15 mA cm^-2 under the optimized potential at -0.9 V vs. RHE. The NiCu@NCNPs electrode also exhibits excellent stability during the five sequential CO₂ electroreduction experiments. The superior catalytic performance of NiCu@NCNPs in CO₂RR can be related to its microstructure with high electrochemical surface area and low electron transfer resistance. Furthermore, a kinetic analysis has shown the formation of intermediate *COOH is the rate-determining step in CO₂RR towards CO. According to the results of density functional theory (DFT) calculations, a low Gibbs-free energy change (∆G) for the rate-determining step leads to the enhanced catalytic performance of CO₂RR on NiCu@NCNPs.

Locking Effect in Metal@MOF with Superior Stability for Highly Chemoselective Catalysis

Ultrasmall metal nanoparticles (NPs) show high catalytic activity in heterogeneous catalysis but are prone to reunion and loss during the catalytic process, resulting in low chemoselectivity and poor efficiency. Herein, a locking effect strategy is proposed to synthesize high-loading and ultrafine metal NPs in metal-organic frameworks (MOFs) for efficient chemoselective catalysis with high stability. Briefly, the MOF ZIF-90 with aldehyde groups cooperating with diamine chains via aldimine condensation was interlocked, which was employed to confine in situ formation of Au NPs, denoted as Au@L-ZIF-90. The optimized Au@L_a-ZIF-90 has highly dispersed Au NPs (2.60 ± 0.81 nm) with a loading amount around 22 wt % and shows a great performance toward 3-aminophenylacetylene (3-APA) from the selective hydrogenation of 3-nitrophenylacetylene (3-NPA) with a high yield (99%) and excellent durability (over 20 cycles), far superior to contrast catalysts without chains locking and other reported catalysts. In addition, experimental characterization and systematic density functional theory calculations further demonstrate that the locked MOF modulates the charge of Au nanoparticles, making them highly specific for nitro group hydrogenation to obtain 3-APA with high selectivity (99%). Furthermore, this locking effect strategy is also applicable to other metal nanoparticles confined in a variety of MOFs, and all of these catalysts locked with chains show great selectivity (≥90%) of 3-APA. The proposed strategy in this work provides a novel and universal method for precise control of the inherent activity of accessible metal nanoparticles with a programmable MOF microenvironment toward highly specific catalysis.

Atomically Dispersed Cu Catalysts on Sulfide-Derived Defective Ag Nanowires for Electrochemical CO2 Reduction

Single-atom catalysts (SACs) have shown potential for achieving an efficient electrochemical CO₂ reduction reaction (CO2RR) despite challenges in their synthesis. Here, Ag₂S/Ag nanowires provide initial anchoring sites for Cu SACs (Cu/Ag₂S/Ag), then Cu/Ag(S) was synthesized by an electrochemical treatment resulting in complete sulfur removal, i.e., Cu SACs on a defective Ag surface. The CO2RR Faradaic efficiency (FE_CO2RR) of Cu/Ag(S) reaches 93.0% at a CO2RR partial current density (j_CO2RR) of 2.9 mA/cm² under -1.0 V vs RHE, which outperforms sulfur-removed Ag₂S/Ag without Cu SACs (Ag(S), 78.5% FE_CO2RR with 1.8 mA/cm²j_CO2RR). At -1.4 V vs RHE, both FE_CO2RR and j_CO2RR over Cu/Ag(S) reached 78.6% and 6.1 mA/cm², which tripled those over Ag(S), respectively. As revealed by in situ and ex situ characterizations together with theoretical calculations, the interacted Cu SACs and their neighboring defective Ag surface increase microstrain and downshift the d-band center of Cu/Ag(S), thus lowering the energy barrier by ∼0.5 eV for *CO formation, which accounts for the improved CO2RR activity and selectivity toward related products such as CO and C₂₊ products.

DFT-based Machine Learning for Ensemble Effect of Pd@Au Electrocatalysts on CO2 Reduction Reaction

The ensemble effect due to variation of Pd content in Pd-Au alloys have been widely investigated for several important reactions, including CO₂ reduction reaction (CO₂ RR), however, identifying the stable Pd arrangements on the alloyed surface and picking out the active sites are still challenging. Here we use a density functional theory (DFT) based machine-learning (ML) approach to efficiently find the low-energy configurations of Pd-Au(111) surface alloys and the potentially active sites for CO₂ RR, fully covering the Pd content from 0 to 100 %. The ML model is actively learning process to improve the predicting accuracy for the configuration formation energy and to find the stable Pd-Au(111) alloyed surfaces, respectively. The local surface properties of adsorption sites are classified into two classes by the K-means clustering approach, which are closely related to the Pd content on Au surface. The classification is reflected in the variation of adsorption energy of CO and H: In the low Pd content range (0-60 %) the adsorption energies over the surface alloys can be tuned significantly, and in the medium Pd content (37-68 %), the catalytic activity of surface alloys for CO₂ RR can be increased by increase the Pd content and attributed to the meta-stable active site over the surface. Thus, the active site-dependent reaction mechanism is elucidated based on the ensemble effect, which provides new physical insights to understand the surface-related properties of catalysts.

Intermetallic Nanocrystals: Seed-Mediated Synthesis and Applications in Electrocatalytic Reduction Reactions

In recent years, intermetallic nanocrystals (IMNCs) have attracted extensive attention in the field of electrocatalysis. However, precise control over the size, shape, composition, structure, and exposed crystal facet of IMNCs seems to be a challenge to the traditional method of high-temperature annealing although these parameters have a significant effect on the electrocatalytic performance. Controllable synthesis of IMNCs by the wet chemistry method in the liquid phase shows great potential compared with the traditional high-temperature annealing method. In this Review, we attempt to summarize the preparation of IMNCs by the seed-mediated synthesis in the liquid phase, as well as their applications in electrocatalytic reduction reactions. Several representative examples are purposely selected for highlighting the huge potential of the seed-mediated synthesis approach in chemical synthesis. Specifically, we personally perceive the seed-mediated synthesis approach as a promising tool in the future for precise control over the size, shape, composition, structure, and exposed crystal facet of IMNCs.

Metal-Coordinated Phthalocyanines as Platform Molecules for Understanding Isolated Metal Sites in the Electrochemical Reduction of CO2

Single-atom catalysts (SACs) of non-precious transition metals (TMs) often show unique electrochemical performance, including the electrochemical carbon dioxide reduction reaction (CO₂RR). However, the inhomogeneity in their structures makes it difficult to directly compare SACs of different TM for their CO₂RR activity, selectivity, and reaction mechanisms. In this study, the comparison of isolated TMs (Fe, Co, Ni, Cu, and Zn) is systematically investigated using a series of crystalline molecular catalysts, namely TM-coordinated phthalocyanines (TM-Pcs), to directly compare the intrinsic role of the TMs with identical local coordination environments on the CO₂RR performance. The combined experimental measurements, in situ characterization, and density functional theory calculations of TM-Pc catalysts reveal a TM-dependent CO₂RR activity and selectivity, with the free energy difference of ΔG(*HOCO) - ΔG(*CO) being identified as a descriptor for predicting the CO₂RR performance.

Controlled Synthesis of Intermetallic Au2 Bi Nanocrystals and Au2 Bi/Bi Hetero-Nanocrystals with Promoted Electrocatalytic CO2 Reduction Properties

The electrocatalytic properties of metal nanoparticles (NPs) strongly depend on their compositions and structures. Rational design of alloys and/or heterostructures provides additional approaches to modifying their surface geometric and electronic structures for optimized electrocatalytic performance. Here, a solution synthesis of freestanding intermetallic Au₂ Bi NPs, the heterostructures of Au₂ Bi/Bi hetero-NPs, and their promoted electrocatalytic CO₂ reduction reaction (CO₂ RR) performances were reported. It was revealed that the formation and in-situ conversion of heterogeneous seeds (e. g., Au) were of vital importance for the formation of intermetallic Au₂ Bi and Au₂ Bi/Bi hetero-NPs. It was also found that the Au components would act as the structure promoter moderating the binding strength for key intermediates on Bi surfaces. The alloying of Bi with Au and the formation of heterogeneous Au₂ Bi/Bi interfaces would create more surface active sites with modulated electronic structures and stronger adsorption strengths for key intermediates, promoting the CO₂ -to-HCOOH conversion with high activity and selectivity. This work presents a novel route for preparing intermetallic nanomaterials with modulated surface geometric/electric structures and promoting their electrocatalytic activities with alloying effects and interfacial effects. Such strategy may find wide application in catalyst design and synthesis for more electrocatalytic reactions.

Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction

Strain engineering in bimetallic alloy structures is of great interest in electrochemical CO₂ reduction reactions (CO₂RR), in which it simultaneously improves electrocatalytic activity and product selectivity by optimizing the binding properties of intermediates. However, a reliable synthetic strategy and systematic understanding of the strain effects in the CO₂RR are still lacking. Herein, we report a strain relaxation strategy used to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realize an outstanding CO₂-to-CO Faradaic efficiency of 96.6% and show the outstanding activity and durability toward a Zn-CO₂ battery. Molecular dynamics (MD) simulations predict that the relaxation of strained PdNi alloys (s-PdNi) is correlated with increases in synthesis temperature, and the high temperature activation energy drives complete atomic mixing of multiple metal atoms to allow for regulation of lattice strains. Density functional theory (DFT) calculations reveal that strain relaxation effectively improves CO₂RR activity and selectivity by optimizing the formation energies of *COOH and *CO intermediates on s-PdNi alloy surfaces, as also verified by in situ spectroscopic investigations. This approach provides a promising approach for catalyst design, enabling independent optimization of formation energies of reaction intermediates to improve catalytic activity and selectivity simultaneously.

Enhanced CO2 Electrochemical Reduction Performance over Cu@AuCu Catalysts at High Noble Metal Utilization Efficiency

The electrochemical CO₂ reduction reaction (CO₂RR) represents a viable alternative to help close the anthropogenic carbon cycle and convert intermittent electricity from renewable energy sources to chemical energy in the form of value-added chemicals. The development of economic catalysts possessing high faradaic efficiency (FE) and mass activity (MA) toward CO₂RR is critical in accelerating CO₂ utilization technology. Herein, an elaborate Au-Cu catalyst where an alloyed AuCu shell caps on a Cu core (Cu@AuCu) is developed and evaluated for CO₂-to-CO electrochemical conversion. Specific roles of Cu and Au for CO₂RR are revealed in the alloyed core-shell structure, respectively, and a compositional-dependent volcano-plot is disclosed for the Cu@AuCu catalysts toward selective CO production. As a result, the Au₂-Cu₈ alloyed core-shell catalyst (only 17% Au content) achieves an FE_CO value as high as 94% and an MA_CO of 439 mA/mg_Au at -0.8 V (vs RHE), superior to the values for pure Au, reflecting its high noble metal utilization efficiency.

Atomic-Strain Mapping of High-Index Facets in Late-Transition-Metal Nanoparticles for Electrocatalysis

Although high-index facets (HIF) endows excellent catalytic activity through undercoordinated sites with strain effect, current characterizations techniques still cannot unravel the detailed strain distributions to understand the origins of electroactivity. Nevertheless, theoretical principles to quantify the structural features and their effects on catalytic activity improvements on HIFs are still lacking, which renders the experimental efforts laborious. In this work, we explore the quantification of surface structural features and establish a database of atomic strain distributions for the late-transition metal HIF nanoparticle models. The surface reactivities of the nanoparticles have been examined by adsorption energy calculations and their correlations with structural features are observed. Our proposed theoretical principles on surface characterizations of high-index facets nanomaterials will promote the design and synthesis of efficient transition metal based electrocatalysts.

Intermetallic Compounds: Liquid-Phase Synthesis and Electrocatalytic Applications

Characterized by long-range atomic ordering, well-defined stoichiometry, and controlled crystal structure, intermetallics have attracted increasing attention in the area of chemical synthesis and catalytic applications. Liquid-phase synthesis of intermetallics has arisen as the promising methodology due to its precise control over size, shape, and resistance toward sintering compared with the traditional metallurgy. This short review tends to provide perspectives on the liquid-phase synthesis of intermetallics in terms of both thermodynamics and methodology, as well as its applications in various catalytic reactions. Specifically, basic thermodynamics and kinetics in the synthesis of intermetallics will be first discussed, followed by discussing the main factors that will affect the formation of intermetallics during synthesis. The application of intermetallics in electrocatalysis will be demonstrated case by case at last. We conclude the review with perspectives on the future developments with respect to both synthesis and catalytic applications.

Enhanced Electrochemical Reduction of CO2 to CO on Ag/SnO2 by a Synergistic Effect of Morphology and Structural Defects

Silver (Ag)-based materials are considered to be promising materials for electrochemical reduction of CO₂ to produce CO, but the selectivity and efficiency of traditional polycrystalline Ag materials are insufficient; there still exists a great challenge to explore novel modified Ag based materials. Herein, a nanocomposite of Ag and SnO₂ (Ag/SnO₂ ) for efficient reduction of CO₂ to CO is reported. HRTEM and XRD patterns clearly demonstrated the lattice destruction of Ag and the amorphous SnO₂ in the Ag/SnO₂ nanocomposite. Electrochemical tests indicated the nanocomposite containing 15% SnO₂ possesses highest catalytic selectivity featured by a CO faradaic efficiency (FE) of 99.2% at -0.9 V versus reversible hydrogen electrode (vs RHE) and FE>90% for the CO product at a wide potential range from -0.8 V to -1.4 V vs RHE. Experimental characterization and analysis showed that the high catalytic performance is attributed to not only the branched morphology of Ag/SnO₂ nanocomposites (NCs), which endows the maximum exposure of active sites, but also the special adsorption capacity of abundant defect sites in the crystal for *COOH (the key intermediate of CO formation), which improves the intrinsic activity of the catalyst. But equally important, the existed SnO₂ also plays an important role in inhibiting hydrogen evolution reaction (HER) and anchoring defect sites. This work demonstrates the use of crystal defect engineering and synergy in composite to improve the efficiency of electrocatalytic CO₂ reduction reaction (CO₂ RR).

A high throughput optical method for studying compositional effects in electrocatalysts for CO2 reduction

In the problem of electrochemical CO₂ reduction, the discovery of earth-abundant, efficient, and selective catalysts is essential to enabling technology that can contribute to a carbon-neutral energy cycle. In this study, we adapt an optical high throughput screening method to study multi-metallic catalysts for CO₂ electroreduction. We demonstrate the utility of the method by constructing catalytic activity maps of different alloyed elements and use X-ray scattering analysis by the atomic pair distribution function (PDF) method to gain insight into the structures of the most active compositions. Among combinations of four elements (Au, Ag, Cu, Zn), Au₆Ag₂Cu₂ and Au₄Zn₃Cu₃ were identified as the most active compositions in their respective ternaries. These ternary electrocatalysts were more active than any binary combination, and a ca. 5-fold increase in current density at potentials of −0.4 to −0.8 V vs. RHE was obtained for the best ternary catalysts relative to Au prepared by the same method. Tafel plots of electrochemical data for CO₂ reduction and hydrogen evolution indicate that the ternary catalysts, despite their higher surface area, are poorer catalysts for the hydrogen evolution reaction than pure Au. This results in high Faradaic efficiency for CO₂ reduction to CO.

A high-throughput method is presented for the synthesis and testing of alloy electrocatalysts for gas phase CO₂ electrolysis. Active ternary alloy catalysts were discovered and their structures characterized by X-ray pair distribution functional analysis.

Strain-Stabilized Metastable Face-Centered Tetragonal Gold Overlayer for Efficient CO2 Electroreduction

Synthesis of the unconventional phase of noble metal nanocrystals may create new opportunities in exploring intriguing physicochemical properties but remains challenging. In the research field of thin film growth, the interface strain offers a general driving force to stabilize the metastable phase of epitaxial film. Herein we extend this concept to the field of noble metal nanocrystals and report the solution synthesis of metastable face-centered tetragonal Au that has not been discovered before. The successful synthesis relies on the formation of intermetallic AuCu₃@Au core-shell structure, where the interface strain stabilizes the metastable fct Au overlayer. Compared with the face-centered cubic Au counterpart, the metastable fct Au shows greatly improved catalytic activity toward CO₂ reduction to CO. The density functional theory calculations and spectroscopic studies reveal that the metastable fct Au upshifts the d-band center, which lowers the energy barrier of key intermediate COOH* formation and thus facilitates the reaction kinetics.

Exposed facet-controlled N2 electroreduction on distinct Pt3Fe nanostructures of nanocubes, nanorods and nanowires

Understanding the correlation between exposed surfaces and performances of controlled nanocatalysts can aid effective strategies to enhance electrocatalysis, but this is as yet unexplored for the nitrogen reduction reaction (NRR). Here, we first report controlled synthesis of well-defined Pt3Fe nanocrystals with tunable morphologies (nanocube, nanorod and nanowire) as ideal model electrocatalysts for investigating the NRR on different exposed facets. The detailed electrocatalytic studies reveal that the Pt3Fe nanocrystals exhibit shape-dependent NRR electrocatalysis. The optimized Pt3Fe nanowires bounded with high-index facets exhibit excellent selectivity (no N2H4 is detected), high activity with NH3 yield of 18.3 μg h-1 mg-1 cat (0.52 μg h-1 cm-2 ECSA; ECSA: electrochemical active surface area) and Faraday efficiency of 7.3% at -0.05 V versus reversible hydrogen electrode, outperforming the {200} facet-enclosed Pt3Fe nanocubes and {111} facet-enclosed Pt3Fe nanorods. They also show good stability with negligible activity change after five cycles. Density functional theory calculations reveal that, with high-indexed facet engineering, the Fe-3d band is an efficient d-d coupling correlation center for boosting the Pt 5d-electronic exchange and transfer activities towards the NRR.

Carbon dioxide reduction to multicarbon hydrocarbons and oxygenates on plant moss-derived, metal-free, in situ nitrogen-doped biochar

Electrochemical reduction of carbon dioxide (CO₂) is considered a promising renewable energy conversion technology, but it remains challenging to find active, stable, low-cost, and highly efficient electrocatalysts for the CO₂ conversion. Here, we develop an in situ nitrogen-doped, metal-free, porous biochar from plant moss to catalyze the electrochemical reduction of CO₂ into methane (CH₄), methanol (CH₃OH) and ethanol (C₂H₅OH) at high current densities and low overpotentials. Using this metal-free biochar electrocatalyst, production rates of approximately 36.1, 32.1, and 18.1 μg h^-1 cm^-2 towards CH₄, C₂H₅OH, and CH₃OH are obtained with Faradaic efficiencies of 56.0%, 26.0% and 10.5%, respectively. In addition, the total faradaic efficiency reaches 92.6% at -1.2 V (vs. Ag/AgCl) with good stability. A favorable pathway for the electrochemical reduction of CO₂ over the metal-free biochar is also provided. This study presents a new approach to produce cost-effective, in situ nitrogen-doped porous biochars with excellent efficiency and durability for the electrochemical reduction of CO₂.

Strain Influences the Hydrogen Evolution Activity and Absorption Capacity of Palladium

Strain engineering can increase the activity and selectivity of an electrocatalyst. Tensile strain is known to improve the electrocatalytic activity of palladium electrodes for reduction of carbon dioxide or dioxygen, but determining how strain affects the hydrogen evolution reaction (HER) is complicated by the fact that palladium absorbs hydrogen concurrently with HER. We report here a custom electrochemical cell, which applies tensile strain to a flexible working electrode, that enabled us to resolve how tensile strain affects hydrogen absorption and HER activity for a thin film palladium electrocatalyst. When the electrodes were subjected to mechanically-applied tensile strain, the amount of hydrogen that absorbed into the palladium decreased, and HER electrocatalytic activity increased. This study showcases how strain can be used to modulate the hydrogen absorption capacity and HER activity of palladium.

A Generalized Surface Chalcogenation Strategy for Boosting the Electrochemical N2 Fixation of Metal Nanocrystals

Electrocatalytic nitrogen reduction reaction (NRR) is a promising process relative to energy-intensive Haber-Bosch process. While conventional electrocatalysts underperform with sluggish paths, achieving dissociation of N₂ brings the key challenge for enhancing NRR. This study proposes an effective surface chalcogenation strategy to improve the NRR performance of pristine metal nanocrystals (NCs). Surprisingly, the NH₃ yield and Faraday efficiency (FE) (175.6 ± 23.6 mg h^-1 g^-1 _Rh and 13.3 ± 0.4%) of Rh-Se NCs is significantly enhanced by 16 and 15 times, respectively. Detailed investigations show that the superior activity and high FE are attributed to the effect of surface chalcogenation, which not only can decrease the apparent activation energy, but also inhibit the occurrence of the hydrogen evolution reaction (HER) process. Theoretical calculations reveal that the strong interface strain effect within core@shell system induces a critical redox inversion, resulting in a rather low valence state of Rh and Se surface sites. Such strong correlation indicates an efficient electron-transfer minimizing NRR barrier. Significantly, the surface chalcogenation strategy is general, which can extend to create other NRR metal electrocatalysts with enhanced performance. This strategy open a new avenue for future NH₃ production for breakthrough in the bottleneck of NRR.

Investigation of Structural Evolution of SnO2 Nanosheets towards Electrocatalytic CO2 Reduction

In-depth understanding of the catalytic active sites is of paramount importance for the design of efficient electrocatalysts for CO₂ conversion. Here we highlight the structural evolution of SnO₂ nanosheets for electrocatalytic CO₂ reduction. The transformation of SnO₂ into metallic Sn would occur on the surface of catalyst during the catalytic process, followed by enhanced selectivity and activity for the conversion of CO₂ to HCOOH. Electrocatalytic characterization and structural analysis demonstrate that the metallic Sn derived from structural evolution plays a dominant role in the CO₂ reduction to HCOOH. This work deepens the understanding of the catalytic mechanism and provides a new pathway for the rational design of advanced electrocatalysts for CO₂ reduction.

Electronic engineering of CoSe/FeSe2 hollow nanospheres for efficient water oxidation

First-row non-precious metal-based catalysts are widely studied and recognized as potential substitutes for precious metal-based catalysts in the oxygen evolution reaction (OER) for hydrogen generation but their application remains challenging. In this study, a unique class of Co-Fe selenide hollow nanospheres (CoSe@FeSe2) is well-designed through a facile hydrothermal method. The in situ formed hybrid composites possess numerous interfaces allowing partial electron transfer via O2- bridges to optimize the adsorption feature of the reaction intermediates, *OH, *O, and *OOH, on the catalysts. The collected surface valence band spectra evidence the optimization of the intermediate adsorption and active sites. The as-synthesized CoSe@FeSe2 exhibits excellent OER activity with a low overpotential of 281 mV to drive a current density of 10 mA cm-2 and a low Tafel slope of 34.3 mV dec-1 in an alkaline electrolyte. Additionally, the advanced catalyst also shows super stability with negligible current density decay after 12 h. This work presents a prototype for the fabrication of highly efficient electrocatalysts using an electronic engineering strategy.

Durable Cathodes and Electrolyzers for the Efficient Aqueous Electrochemical Reduction of CO2

The world emits over 14 gigatons of CO₂ in excess of what can be remediated by natural processes annually, contributing to rising atmospheric CO₂ levels and increasing global temperatures. The electrochemical reduction of CO₂ (CO₂ RR) to value-added chemicals and fuels has been proposed as a method for reusing these excess anthropogenic emissions. While state-of-the-art CO₂ RR systems exhibit high current densities and faradaic efficiencies, research on long-term electrode durability, necessary for this technology to be implemented commercially, is lacking. Previous reviews have focused mainly on the CO₂ electrolyzer performance without considering durability. In this Review, the need for research into high-performing and durable CO₂ RR systems is stressed by summarizing the state-of-the-art with respect to durability. Various failure modes observed are also reported and a protocol for standard durability testing of CO₂ RR systems is proposed.

Atomic-Level Construction of Tensile-Strained PdFe Alloy Surface toward Highly Efficient Oxygen Reduction Electrocatalysis

Exploring the high-performance non-Pt electrocatalysts for oxygen reduction reaction (ORR), the bottleneck process in fuel cells, is desirable but challenging. Here, we report the Pd@PdFe core-shell icosahedra as an active and durable electrocatalyst toward ORR in alkaline conditions, which feature a three-atomic-layer tensile-strained PdFe overlayer on Pd icosahedra. Our optimized catalyst shows 2.8-fold enhancement in mass activity and 6.9-fold enhancement in specific activity than commercial Pt/C catalyst toward ORR, representing one of the best non-Pt electrocatalysts. Moreover, the boosted ORR catalysis is strongly supported by the assembled fuel cell performance using Pd@PdFe core-shell icosahedra as the cathode electrocatalyst. The density functional theory calculations reveal that the synergistic coupling of tensile strain and alloy effects enables the optimum binding strength for intermediates, thus causing the maximum activity. The present work suggests the coupling between multiple surface modulations endows larger room for the rational design of remarkable catalysts.

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂ RR) to yield synthesis gas (syngas, CO and H₂ ) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂ RR activity and the CO/H₂ ratio. To address this issue, nitrogen-doped carbon supported single-atom catalysts are designed as electrocatalysts to produce syngas from CO₂ RR. While Co and Ni single-atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^-2 ) with CO/H₂ ratios (0.23-2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single-atom configurations for the H₂ and CO evolution. The results present a useful case on how non-precious transition metal species can maintain high CO₂ RR activity with tunable CO/H₂ ratios.

Computational insights into the strain effect on the electrocatalytic reduction of CO2 to CO on Pd surfaces

Electrochemical CO2 reduction reaction (CO2RR) provides a promising scenario to achieve carbon renewable energy storage and alleviate energy depletion. It was found experimentally in the literature that strain over Pd surfaces can adjust the activity and selectivity of electrocatalytic CO2RR. Here, using density functional theory (DFT) calculations and the Sabatier analysis method, we investigated the electrochemical reduction of CO2 to CO at different electric potentials over Pd surfaces with lattice strains of -2%, -1%, 1% and 2%. Four types of Pd surfaces with different structures and co-ordination numbers were considered, namely Pd(111), (100), (110) and (211). We obtained the differential adsorption energy of key intermediates in CO2RR, i.e. COOH and CO, with DFT as a function of CO coverage on these Pd surfaces. Further analysis showed that the adsorption energy at high coverage might be correlated with the Coulomb interaction energy between surface species. With the adsorbate-adsorbate interactions included in the analyses, we found that the strained Pd(111) surface shows the highest CO2RR activity among the four surfaces considered, which is consistent with previous experimental observations. These results highlight the significance of surface strain effects on the reactivity of CO2RR and provide guidance for practical catalyst development.