Lanthanide Metal-Organic Framework Microrods: Colored Optical Waveguides and Chiral Polarized Emission

A Multifunctional Tb(III)-Based Metal-Organic Framework for Chemical Conversion of CO2, Fluorescence Sensing of Trace Water and Metamitron

The utilization of metal-organic frameworks (MOFs) as fluorescent sensors for the detection of environmental and chemical reagent pollutants as well as heterogeneous catalysis for CO2 conversion represents a crucial avenue of research with significant implications for the protection of human health. In this work, a Tb(III)-based three-dimensional metal-organic framework, [Tb(L)·4DMF]n (Tb-MOF) (H3L = 5'-(4-carboxy-3-hydroxyphenyl)-3,3″-dihydroxy-[1,1':3',1″-terphenyl]-4,4″-dicarboxylic acid), has been structurally conformed by single-crystal X-ray crystallography. It possesses a 1D rhombus channel along the [010] direction, featuring a pore size of 6.02 × 9.13 Å. Tb-MOF was proved to be a multifunctional material for a fluorescent sensor and CO2 cycloaddition heterogeneous catalyst material. Fluorescence sensing studies revealed that Tb-MOF demonstrates high sensitivity, selectivity, and favorable regeneration properties, making it an effective chemosensor for detecting the metamitron (MMT) pesticide and trace water in organic solvents. The mechanism of fluorescence quenching by MMT and water was elucidated by a combination of XRD, UV-vis absorption spectra, IR spectra, theoretical calculations, and fluorescence lifetimes. The material was also utilized for the sensing of MMT and water in paper strips. Additionally, the open Tb3+ site as Lewis acidic centers makes Tb-MOF achieve efficiently catalytic conversion for CO2 and epoxides to cyclic carbonates. Moreover, a possible catalytic mechanism for the conversion of carbon dioxide to cyclic carbonates was proposed by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments. It also exhibited recyclability for up to five cycles without noticing an appreciable loss in sensing or catalytic efficiency.

High-Entropy Lanthanide-Organic Framework as an Efficient Heterogeneous Catalyst for Cycloaddition of CO2 with Epoxides and Knoevenagel Condensation

Multimetallic synergistic effects have the potential to improve CO2 cycloesterification and Knoevenagel reaction processes, outperforming monometallic MOFs. The results demonstrate superior performance in these processes. To investigate this, we created and characterized a selection of single-component Ln(III)-MOFs (Ln=Eu, Tb, Gd, Dy, Ho) and high-entropy lanthanide-organic framework (HE-LnMOF) using solvent-thermal conditions. The experiments revealed that HE-LnMOF exhibited heightened catalytic efficiency in CO2 cycloesterification and Knoevenagel reactions compared to single-component Ln(III) MOFs. Moreover, the HE-LnMOF displayed significant stability, maintaining their structural integrity after five cycles while sustaining elevated conversion and selectivity rates. The feasible mechanisms of catalytic reactions were also discussed. HE-LnMOF possess multiple unsaturated metal centers, acting as Lewis acid sites, with oxygen atoms connecting the metal, and hydroxyl groups on the ligand serving as base sites. This study introduces a novel method for synthesizing HE-LnMOF and presents a fresh application of HE-LnMOF for converting CO2.

Dual Stimulus Responsive GO-Modified Tb-MOF toward a Smart Coating for Corrosion Detection

Smart-sensing coatings that exhibit multistimulus response, rapid indication, and reusability are in urgent need to effectively enhance the practicability of coatings while accurately detecting metal corrosion. In this work, a reusable corrosion self-reporting coating with multiple pH and Fe3+ stimulus responses was first constructed by the integration of a composite fluorescent probe into the resin matrix. This composite sensor was constructed by combining a lanthanide metal-organic framework (Ln-MOF) based on terbium and trimeric acid (H3BTC) with graphene oxide (GO) nanosheets (GO@Tb-BTC). The incorporation of GO formed a sea-urchin-like structure, thereby increasing the specific surface area and active sites of the probe. The coatings were characterized by using electrochemical impedance spectroscopy (EIS), visual observation, and fluorescence spectrophotometry. The surface morphology, wettability, and adhesion of the coating samples were analyzed using SEM, XPS, hydrostatic contact angle test, and an adhesion test. EIS measurements in 3.5 wt % NaCl solution for 72 h demonstrated the superior corrosion protection performance of the 0.3 wt %/GO@Tb-BTC/WEP coating compared to blank coating, with the charge-transfer resistance reaching 4.33 × 107 Ω·cm2, which was 9.5 times higher than that of the pure coating. The bright green fluorescence of GO@Tb-BTC/WEP coating exhibited a turn-off response when there was an excess of OH-/H+, but it demonstrated a reversible turn-on fluorescence when the ambient pH returned to neutral. Furthermore, such Fe3+-triggered fluorescence quenching responded to concentrations as low as 1 × 10-6 M. The fluorescence quenching rate of both intact and damaged coatings surpassed that of visual and EIS detection methods. Significantly, the fluorescence in scratches was effectively quenched within 25 min using 0.3 wt %/GO@Tb-BTC/WPU coating for visual observation. GO@Tb-BTC demonstrated exceptional corrosion self-reporting capabilities in both epoxy and polyurethane systems, making it a versatile option beyond single-coating applications.

Luminescent lanthanide-containing gelatin/polydextran/laponite nanocomposite double-network hydrogels for processing and sensing applications

Lanthanide-containing nanomaterials have gained significant popularity for their utilization in polymeric networks, enabling the creation of luminescent nanocomposites for advanced applications. In this study, we developed a new type of lanthanide-containing nanocomposite hydrogels by incorporating terbium-containing laponite (Tb3+@Lap) into the networks of polyethyleneimine-modified gelatin/polydextran aldehyde (PG/PDA) through dynamic bonds. The structures and properties of the Tb3+@Lap-containing nanocomposite double-network (ncDN) hydrogels were comprehensively investigated in comparison with the DN hydrogels with a pure polymeric network and the Lap-containing ncDN hydrogels. The PG/PDA/Tb3+@Lap ncDN hydrogels with multiple dynamic bonds (i.e., imine bonds, coordination bonds, hydrogen bonds, and electrostatic interactions) exhibited remarkable characteristics of shear-thinning and self-healing, making them suitable for the construction of hydrogel scaffolds on a macroscale using fabrication techniques such as electrospinning and 3D printing. Moreover, the PG/PDA/Tb3+@Lap ncDN hydrogels have been demonstrated to act as sensitive and selective luminescent sensors for detecting copper ions. Taken together, a versatile lanthanide-containing ncDN hydrogel platform capable of dynamic features is developed for processing and sensing applications.

Green Ultrasound-Assisted Synthesis of Rare-Earth-Based MOFs

Rare-earth (RE)-based metal organic frameworks (MOFs) are quickly gaining popularity as flexible functional materials in a variety of technological fields. These MOFs are useful for more than just conventional uses like gas sensors and catalyst materials; in fact, they also show significant promise in emerging technologies including photovoltaics, optical, and biomedical applications. Using yttrium and europium as ionic host centres and dopants, respectively, and 1,3,5-benzenetricarboxylic acid (H3-BTC) as an organic linker, we describe a simple and green approach for the fabrication of RE-MOFs. Specifically, Y-BTCs and Eu-doped Y-BTCs MOFs have been synthesised in a single step using an eco-friendly method that makes use of ultrasound technology. To establish a correlation between the morphological and structural properties and reaction conditions, a range of distinct reaction periods has been employed for the synthetic processes. Detailed analyses of the synthesised samples through powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FE-SEM), and Fourier-transform infrared spectroscopy (FT-IR) have confirmed the phase formation. Furthermore, thermal analyses such as thermogravimetric analysis (TGA) have been employed to evaluate the thermal stability and structural modifications of the Y-BTC and Eu-doped Y-BTC samples. Finally, the luminescent properties of the synthesised samples doped with Eu3+ have been assessed, providing an evaluation of their characteristics. As a proof of concept, an Eu-doped Y-BTC sample has been applied for the sensing of nitrobenzene as a molecule test of nitro derivatives.

Upconversion Luminescence through Cooperative and Energy-Transfer Mechanisms in Yb3+ -Metal-Organic Frameworks

Lanthanide-doped metal-organic frameworks (Ln-MOFs) have versatile luminescence properties, however it is challenging to achieve lanthanide-based upconversion luminescence in these materials. Here, 1,3,5-benzenetricarboxylic acid (BTC) and trivalent Yb³⁺ ions were used to generate crystalline Yb-BTC MOF 1D-microrods with upconversion luminescence under near infrared excitation via cooperative luminescence. Subsequently, the Yb-BTC MOFs were doped with a variety of different lanthanides to evaluate the potential for Yb³⁺ -based upconversion and energy transfer. Yb-BTC MOFs doped with Er³⁺ , Ho³⁺ , Tb³⁺ , and Eu³⁺ ions exhibit both the cooperative luminescence from Yb³⁺ and the characteristic emission bands of these ions under 980 nm irradiation. In contrast, only the 497 nm upconversion emission band from Yb³⁺ is observed in the MOFs doped with Tm³⁺ , Pr³⁺ , Sm³⁺ , and Dy³⁺ . The effects of different dopants on the efficiency of cooperative luminescence were established and will provide guidance for the exploitation of Ln-MOFs exhibiting upconversion.

A New Microporous Lanthanide Metal-Organic Framework with a Wide Range of pH Linear Response

Lanthanide metal-organic frameworks (Ln-MOFs) have attracted extensive attention because of their structural adjustability and wide optical function applications. However, MOFs with a wide linear pH response and stable framework structures in acidic or alkaline solutions are rare to date. Here, we used 4,4',4″-s-triazine-2,4,6-triyltribenzoate (H₃TATB) as an organic ligand, coordinated with lanthanide ions (Eu³⁺/Tb³⁺), and synthesized a new metal-organic framework material. The material has a porous three-dimensional square framework structure and emits bright red or green fluorescence under 365 nm UV light. The carboxyl group of the ligand is prone to protonation in an acidic environment, and negatively charged OH^- and ligand (TATB^3-) have a competitive effect in an alkaline environment, which could affect the coordination ability of ligand. The luminescence degree of the framework decreases with the increase in the degree of acid and base. In particular, such fluorescence changes have a wide linear response (pH = 0-14), which can be used as a potential fluorescence sensing material for pH detection.

The special case of the spectral emission of a Tb3+ mono metal complex

The fine structure in the spectral lines of the visible fluorescence of Tb 3+  complexes are replaced by a single peak in the case of a singular molecular complex Tb(H 3 PTC) 3  , where H 4 PTC represents perylene-3,4,9,10-tetracarboxylic acid, and its emission wavelength depends on the film thickness. This single peak challenges the old creed that the f-orbital electrons of Tb 3+  are always protected from the influence of the surrounding atoms. We perform density functional theory calculations to show that the wavefunction of the ground state is localized and in addition, spin-polarized, and this facilitates fluorescent transitions under UV to the first excited state instead of the fundamental state. We discuss the possibility of making a spintronic device with the molecule, Tb(H 3 PTC) 3  .

Laterally Engineering Lanthanide-MOFs Epitaxial Heterostructures for Spatially Resolved Planar 2D Photonic Barcoding

Metal-organic frameworks (MOFs) heterostructures with domain-controlled emissive colors have shown great potential for achieving high-throughput sensing, anti-counterfeit and information security. Here, a strategy based on steric-hindrance effect is proposed to construct lateral lanthanide-MOFs (Ln-MOFs) epitaxial heterostructures, where the channel-directed guest molecules are introduced to rebalance in-plane and out-of-plane growth rates of the Ln-MOFs microrods and eventually generate lateral MOF epitaxial heterostructures with controllable aspect ratios. A library of lateral Ln-MOFs heterostructures are acquired through a stepwise epitaxial growth procedure, from which rational modulation of each domain with specific lanthanide doping species allows for definition of photonic barcodes in a two-dimensional (2D) domain with remarkably enlarged encoding capacity. The results provide molecular-level insight into the use of modulators in governing crystallite morphology for spatially assembling multifunctional heterostructures.

Dynamic Manipulating Space-Resolved Persistent Luminescence in Core-Shell MOFs Heterostructures via Reversible Photochromism

Photo-controllable persistent luminescence at the single crystal level can be achieved by the integration of long-lived room temperature phosphorescence (RTP) and photochromism within metal-organic frameworks (MOFs) for the first time. Moreover, the multiblock core-shell heterojunctions have been prepared utilizing the isostructural MOFs through an epitaxial growth process, in which the shell exhibits bright yellow afterglow emission that gradually disappears upon further irradiation, but the core does not show such property. Benefitting from combined persistent luminescence and photochromic behavior, a multiple encryption demo can be facilely designed based on the dynamic manipulating RTP via reversible photochromism. This work not only develops new types of dynamically photo-controllable afterglow switch, but also provides a method to obtain MOFs-based optical heterojunctions towards potential space/time-resolved information encryption and anti-counterfeiting applications.

Activating Room-Temperature Phosphorescence of Organic Luminophores via External Heavy-Atom Effect and Rigidity of Ionic Polymer Matrix*

Pure organic room-temperature phosphorescence (RTP) materials have attracted wide attention for their easy preparation, low toxicity, and applications in various fields like bioimaging and anti-counterfeiting. Developing phosphorescent systems with more universality and less difficulty in synthesis has long been the pursuit of materials scientists. By employing a polymeric quaternary ammonium salt with an ionic bonding matrix and heavy atoms, commercial fluorescent dyes are directly endowed with phosphorescence emission. In a single amorphous polymer, the external heavy-atom effect generates excited triplet states and the rigid polymer matrix stabilizes them. This study put forward a new general strategy to design and develop pure organic RTP materials starting from existing library of organic dyes without complicated chemical synthesis.

Controlled Shape Evolution of Pure-MOF 1D Microcrystals towards Efficient Waveguide and Laser Applications

MOF-based one-dimensional materials have received increasing attention in the nanophotonics field, but it is still difficult in the flexible shape evolution of MOF micro/nanocrystals for desired optical functionalities due to the susceptible solvothermal growth process. Herein, we report on the well-controlled shape evolution of pure-MOF microcrystals with optical waveguide and lasing performances based on a bottom-up and top-down synergistic method. The MOF microcrystals from solvothermal synthesis (bottom-up) enable the evolution from microrods via microtubes to nanowires through a chelating agent-assisted etching process (top-down). The three types of MOF 1D-microstructures with high crystallinity and smooth surfaces all exhibit efficient optical waveguide performance. Furthermore, MOF nanowire with lowest propagation loss served as low-threshold pure-MOF nanolasers with Fabry-Pérot resonance. These results advance the fundamental understanding on the controlled MOF evolution mechanism, and offer a valuable route for the development of pure-MOF-based photonic components with desired functionalities.

Modulating Magnetic and Photoluminescence Properties in 2-Aminonicotinate-Based Bifunctional Coordination Polymers by Merging 3d Metal Ions

Herein, the synthesis and study of bifunctional coordination polymers (CPs) with both magnetic and photoluminescence properties, derived from a heterometallic environment, are reported. As a starting point, three isostructural monometallic CPs with the formula [M(μ-2ani)₂ ]_n (M^II =Mn (1_Mn ), Co (3_Co ) and Ni (4_Ni ); 2ani=2-aminonicotinate), crystallise as chiral 2D-layered structures stacked by means of supramolecular interactions. These compounds show high thermal stability in the solid state (above 350 °C), despite which, in aqueous solution, compound 1_Mn is shown to partially transform into a novel 1D chain CP with the formula [Mn(2ani)₂ (μ-H₂ O)₂ ]_n (2_Mn ). A study of the direct current (dc) magnetic properties of 1_Mn , 3_Co and 4_Ni reveals a spin-canted structure derived from antisymmetric antiferromagnetic weak exchanges along the chiral network (as confirmed by DFT calculations) and magnetic anisotropy of the ions, in such a way that long-range ordering is observed with variable magnitude for the spin carriers. Moreover, compounds 3_Co and 4_Ni show no frequency-dependent alternating current (ac) susceptibility curves under zero dc field; this is characteristic behaviour of a glassy state that may be partially supressed for 3_Co by applying an external dc field. To overcome long-range magnetic ordering, Co^II ions are diluted in a diamagnetic Zn^II -based matrix, which enables single-molecule magnet behaviour. Interestingly, this strategy allows a bifunctional Co_x Zn_1-x 2ani material, which is imbued with a strong photoluminescent emitting capacity, as characterised by an intense blue light followed by a green afterglow, to be obtained.

Helical Nanostructures with Circularly Polarized Luminescence from the Multicomponent Assembly of π-Conjugated N-terminal Amino Acids

Self-assembled structures with circularly polarized luminescence (CPL) have attracted great attention in recent years. π-conjugated N-terminal amino acids with chiral amino acid residues and luminophores are capable of forming self-assembled structures at hierarchical levels, whereby chirality can be transferred to the macroscopic scale with easily modulated CPL properties. Due to the presence of multiple noncovalent binding sites, including hydrogen bonding and aromatic interactions, π-conjugated N-terminal amino acids are emerging core candidates for incorporation into multicomponent self-assembled architectures, accomplishing rational control over supramolecular chirality as well as showing rich chiroptical properties. In this Minireview, we provide a brief summary of multiple-component coassembled systems comprising π-conjugated N-terminal amino acids, small organic species and metal ions. The synthesis of helical structures and manipulation of supramolecular chirality by controlling the self-assembled species is introduced, and the CPL properties of multiple-component π-conjugated N-terminal amino acids are also briefly summarized.

Lanthanide-Based Luminescent Materials for Waveguide and Lasing

Microlasers and waveguides have wide applications in the fields of photonics and optoelectronics. Lanthanide-doped luminescent materials featuring large Stokes/anti-Stokes shift, long excited-state lifetime as well as sharp emission bandwidth are excellent optical components for photonic applications. In the past few years, great progress has been made in the design and fabrication of lanthanide-based waveguides and lasers at the micrometer length scale. Waveguide structures and microcavities can be fabricated from lanthanide-doped amorphous materials through top-down process. Alternatively, lanthanide-doped organic compounds featuring large absorption cross-section can self-assemble into low-dimensional structures of well-defined size and morphology. In recent years, lanthanide-doped crystalline structures displaying highly tunable excitation and emission properties have emerged as promising waveguide and lasing materials, which substantially extends the range of lasing wavelength. In this minireview, we discuss recent advances in lanthanide-based luminescent materials that are designed for waveguide and lasing applications. We also attempt to highlight challenging problems of these materials that obstacle further development of this field.

Aqueous Phase Sensing of Fe3+ and Ascorbic Acid by a Metal-Organic Framework and Its Implication in the Construction of Multiple Logic Gates

A new Hf^IV -based metal-organic framework with UiO-66 topology was synthesized via a one-step solvothermal method by using 3-methyl-4-phenylthieno[2,3-b]thiophene-2,5-dicarboxylic acid (H₂ MPTDC) as a ligand. The MOF material showed a high stability in a broad pH range (from pH 2 to pH 12) in an aqueous medium. The presence of hydrophobic methyl and phenyl substituents in the carboxylic acid ligand and strong Hf-O bond play crucial roles in its stability. The new MOF material was systematically characterized by various techniques such as XRPD, N₂ sorption, thermogravimetric analyses and FT-IR spectroscopy. The photophysical properties of the MOF material were also examined by steady-state and time-resolved fluorescence studies. It was observed that the blue fluorescence of the MOF material was selectively quenched in the presence of Fe³⁺ ion in pure aqueous medium. A mechanistic study disclosed that quenching occurs via a strong inner filter effect (IFE) arising from Fe³⁺ ion in aqueous medium. Interestingly, the fluorescence of the MOF material can be recovered by elimination of the IFE of Fe³⁺ ion via reduction of Fe³⁺ ion by ascorbic acid (AA). Based on the fluorescence recovery by AA, a MOF based on-off-on probe was developed for the sensing of Fe³⁺ ion and AA in aqueous medium. Inspired by this reversible sensing event, we demonstrate basic (NOT, OR, YES, INHIBIT and IMP) and higher integrated logic operations utilizing this fluorescent MOF. This MOF-based logic systems could be potentially used for next-generation logic-gate based analytical applications as well as for the detection and discrimination of targeted molecules in various complex domains.

Probing Optical Anisotropy and Polymorph-Dependent Photoluminescence in [Ln2 ] Complexes by Hyperspectral Imaging on Single Crystals

Two homodinuclear and one heterodinuclear lanthanide (Ln)-based complexes of the general formula [Ln₂ (bpm)(tfaa)₆ ] (Ln=Eu (1), Tb (2), Eu-Tb (3), bpm=2,2'-bipyrimidine, tfaa^- =1,1,1-trifluoroacetylacetonate) were synthesized and characterized by single-crystal photoluminescence spectroscopy and hyperspectral imaging. Complexes 1 and 2 crystallize in two polymorphic structures, while three polymorphs were isolated for 3, namely having needle-, plate-, and block-like morphologies. Single-crystal photoluminescence spectroscopy and imaging on Eu³⁺ -containing 1 and 3 revealed polymorph-dependent J-splitting of the hypersensitive ⁵ D₀ →⁷ F₂ Eu³⁺ transition as well as electric-to-magnetic dipole emission intensity ratios. According to these observations, the lowest symmetry chemical environment was attributed to the Eu³⁺ ions present in the needle-like polymorph, also in agreement with single-crystal X-ray diffraction analysis. More importantly, hyperspectral imaging on all three single-crystal polymorphs of 3 exhibits optical anisotropy with photoluminescence enhancement at specific crystallographic faces. This behavior was ascribed to the distinct molecular packing of the Ln-Ln dimers in each polymorphic crystal as well as to face-specific local symmetry of the Eu³⁺ centers. Overall, opto-structural relationships of three Ln-Ln dimers and their single-crystal polymorphs were established as a particularly promising avenue for control of photoluminescence by chemical crystal engineering.

A helical chain-like organic–inorganic hybrid arsenotungstate with color-tunable photoluminescence

A 1-D helical chain-like organic–inorganic hybrid arsenotungstate Na₄H₈[{Pr(H₂O)₂}₂{As₂W₁₉O₆₈}{WO₂(mal)}₂]·24H₂O (1) exhibits excitation-wavelength-dependent emission behaviors with a reversible green–orange-yellow luminescence.