Atomar dispergierte Metallzentren in Metall-organischen Gerüststrukturen für die elektrokatalytische und photokatalytische Energieumwandlung

Effective construction of a CuCo MOF@graphene functional electrocatalyst for hydrogen evolution reaction

Electrochemical water splitting is considered a green and sustainable method of producing hydrogen energy. Herein, to pursue a highly efficient hydrogen evolution reaction, we fabricated high-performance electrocatalysts, by utilizing a bimetallic (Cu and Co) metal-organic framework to modify rGO through a one-step in situ approach. The synthesized CuCoOC@rGO presents a highly ordered structure with a defect-rich porous surface for the hydrogen evolution reaction (HER). Specifically, the appropriate adjustment of metal (Cu and Co), 1,3,5-benzenetricarboxylic acid (H3BTC), and rGO ratios leads to a well-defined morphology, which creates a defect-rich porous surface. Characterized by XRD, SEM, EDS, FT-IR spectroscopy, Raman spectroscopy, XPS, and BET, the morphology exposes more active sites, strong evidence for the promotion of electrocatalytic efficiency. Upon the analysis of the experimental data, the obtained CuCoOC@rGO catalyst exhibits excellent activity in alkaline media with a low overpotential of 120 mV at a current density of 10 mA cm-2, and a Tafel slope of 124 mV dec-1 for the hydrogen evolution reaction (HER). Guided by the structure-activity relationship, the superior HER activity of CuCoOC@rGO in alkaline electrolyte could originate from many sources, including: (1) as a self-supported substrate, CuCoOC@rGO not only leads to profitable electrical contact and mechanical stability but also firmly roots into the rGO without extra binders. (2) The highly ordered structure provides smooth ion and electron transport channels, which are conducive to electrolyte infiltration and gas release. (3) The abundance of defective pores on the surface of the nanoarrays, which offers more active sites for the catalytic process. This study provides new prospects for the rational design and fabrication of advanced hierarchical functional electrocatalysts for application in electrochemical energy devices.

Oxidation of N-Alkyl(iso)quinolinium Salts Over TEMPO@Metal-Organic Framework Heterogeneous Photocatalyst†

Quinolones and isoquinolones are of particular importance to pharmaceutical industry due to their diverse biological activities. However, their synthetic protocols were limited by high toxicity, high energy consumption, poor functional group tolerance and noble metal catalyst. This study concerns the development of a series of TEMPO@PCN-222 (TEMPO: 2,2,6,6-tetramethylpiperidinyl-1-oxy; PCN: porous coordination network) composite photocatalysts by coordinating different amount of 4-carboxy-TEMPO with the secondary building units of PCN-222. Upon visible-light irradiation, photogenerated holes in the highest occupied molecular orbital of PCN-222 can smoothly transfer to TEMPO, which can significantly boost the photosynthesis of bioactive (iso)quinolones from readily available N-alkyl(iso)quinolinium salts. TEMPO@PCN-222 exhibits an outstanding catalytic stability and substrate tolerance with a 1-methyl-2-quinolinone yield of 86.7 %, over four times that with PCN-222 (21.4 %). This work provides a new route to construct composite photocatalysts from abundant starting materials for efficient photosynthesis of high value-added chemicals.

Synergistic Porosity and Charge Effects in a Supramolecular Porphyrin Cage Promote Efficient Photocatalytic CO2 Reduction

We present a supramolecular approach to catalyzing photochemical CO2 reduction through second-sphere porosity and charge effects. An iron porphyrin box (PB) bearing 24 cationic groups, FePB-2(P), was made via post-synthetic modification of an alkyne-functionalized supramolecular synthon. FePB-2(P) promotes the photochemical CO2 reduction reaction (CO2 RR) with 97 % selectivity for CO product, achieving turnover numbers (TON) exceeding 7000 and initial turnover frequencies (TOFmax ) reaching 1400 min-1 . The cooperativity between porosity and charge results in a 41-fold increase in activity relative to the parent Fe tetraphenylporphyrin (FeTPP) catalyst, which is far greater than analogs that augment catalysis through porosity (FePB-3(N), 4-fold increase) or charge (Fe p-tetramethylanilinium porphyrin (Fe-p-TMA), 6-fold increase) alone. This work establishes that synergistic pendants in the secondary coordination sphere can be leveraged as a design element to augment catalysis at primary active sites within confined spaces.

Switching Excited State Distribution of Metal-Organic Framework for Dramatically Boosting Photocatalysis

Photosensitization associated with electron/energy transfer represents the central science of natural photosynthesis. Herein, we proposed a protocol to dramatically improve the sensitizing ability of metal-organic frameworks (MOFs) by switching their excited state distribution from ³ MLCT (metal-to-ligand charge transfer) to ³ IL (intraligand). The hierarchical organization of ³ IL MOFs and Co/Cu catalysts facilitates electron transfer for efficient photocatalytic H₂ evolution with a yield of 26 844.6 μmol g^-1 and CO₂ photoreduction with a record HCOOH yield of 4807.6 μmol g^-1 among all the MOF photocatalysts. Systematic investigations demonstrate that strong visible-light-absorption, long-lived excited state and ingenious multi-component synergy in the ³ IL MOFs can facilitate both interface and intra-framework electron transfer to boost photocatalysis. This work opens up an avenue to boost solar-energy conversion by engineering sensitizing centers at a molecular level.

Metal-Thiolate Framework for Electrochemical and Photoelectrochemical Hydrogen Generation

Hydrogen has evolved as the cleanest and most sustainable fuel, produced directly from naturally abundant water resources. Generation of hydrogen by electrochemical or photoelectrochemical splitting of water has been conceived as the most effective method for hydrogen production. Herein, a robust solid metal-thiolate framework (MTF-1) was obtained by hydrothermal crystallization of the reaction mixture consisting of 1,3,5-triazine-2,4,6-trithioltrisodium salt and Cu^II under mild synthesis conditions. The material was thoroughly characterized and explored as efficient catalyst for electrochemical and photoelectrochemical hydrogen evolution reaction (HER) via water splitting reactions. MTF-1 showed onset potential 0.045 V_RHE and overpotential η(@10 mA cm^-2 ) at 0.096 V_RHE . The electrochemical surface area of MTF-1 was found to be 509 m²  g^-1 . The photo current density at pH 5.0 was found to be 0.487 mA cm^-2 at 0.6 V_RHE . The feasibility of the reaction pathway was correlated from the density function theory study, which suggested the complete downhill energetics indicating spontaneous electrochemical hydrogen generation in the acidic medium.

Metal-Organic Frameworks Derived Electrocatalysts for Oxygen and Carbon Dioxide Reduction Reaction

The increasing demands of energy and environmental concerns have motivated researchers to cultivate renewable energy resources for replacing conventional fossil fuels. The modern energy conversion and storage devices required high efficient and stable electrocatalysts to fulfil the market demands. In previous years, we are witness for considerable developments of scientific attention in Metal-organic Frameworks (MOFs) and their derived nanomaterials in electrocatalysis. In current review article, we have discussed the progress of optimistic strategies and approaches for the manufacturing of MOF-derived functional materials and their presentation as electrocatalysts for significant energy related reactions. MOFs functioning as a self-sacrificing template bid different benefits for the preparation of metal nanostructures, metal oxides and carbon-abundant materials promoting through the porous structure, organic functionalities, abundance of metal sites and large surface area. Thorough study for the recent advancement in the MOF-derived materials, metal-coordinated N-doped carbons with single-atom active sites are emerging candidates for future commercial applications. However, there are some tasks that should be addressed, to attain improved, appreciative and controlled structural parameters for catalytic and chemical behavior.

[Ru(NꓥNꓥN)2-Ce]-based Framework for Photocatalytic Sulfide Oxidation and Hydrogen Production

Using photosensitized Ru(NꓥNꓥN)2-metalloligand, a series of Ce-frameworks were synthesized. The incorporation of visible-light-responsive Ru(NꓥNꓥN)2-unit endows the Ce-frameworks with photocatalytic activities in both sulfide oxidation and hydrogen production. The doping of...

Polyoxometalate-Based Metal-Organic Framework as Molecular Sieve for Highly Selective Semi-Hydrogenation of Acetylene on Isolated Single Pd Atom Sites

Achieving highly selective acetylene semi-hydrogenation in an ethylene-rich gas stream is of great industrial importance. Herein, we construct isolated single Pd atom in a polyoxometalate-based metal-organic framework (POMOF). The unique internal environment allows this POMOF to separate acetylene from acetylene/ethylene gas mixtures and confine it close to the single Pd atom. After semi-hydrogenation, the resulting ethylene is preferentially discharged from the pores, achieving a selectivity of 92.6 %. First-principles simulations reveal that the adsorbed acetylene/ethylene molecules form hydrogen bond networks with oxygen atoms of SiW₁₂ O₄₀ ^4- and create dynamic confinement regions, which preferentially release the produced ethylene. Besides, at the Pd site, the over-hydrogenation of ethylene exhibits a higher reaction energy barrier than the semi-hydrogenation of acetylene. The combined advantages of POMOF and single Pd atom provides an effective approach for the regulation of semi-hydrogenation selectivity.

Mechanistic Studies on Photoinduced Catalytic Olefin Migration Reactions at the Pd(II) Centers of a Porous Crystal, Metal-Macrocycle Framework

Porous crystals with well-defined active metal centers on the pore surface have high potential as heterogeneous metal catalysts. We have recently demonstrated that a porous molecular crystal, metal-macrocycle framework (MMF), catalyzes olefin migration reactions by photoactivation of its Pd^II Cl₂ moieties exposed on the crystalline channel surface. Herein we report a mechanistic study of the photoinduced olefin migration reactions at the Pd^II active centers of MMF. Several experiments, including a deuterium scrambling study, revealed that olefin migration is catalyzed via an alkyl mechanism by in situ generated Pd-H species on the channel surface during photoirradiation. This proposed mechanism was further supported by DFT and ONIOM calculations.

Single-Atom and Dual-Atom Electrocatalysts Derived from Metal Organic Frameworks: Current Progress and Perspectives

Single-atom catalysts (SACs) have attracted increasing research interests owing to their unique electronic structures, quantum size effects and maximum utilization rate of atoms. Metal organic frameworks (MOFs) are good candidates to prepare SACs owing to the atomically dispersed metal nodes in MOFs and abundant N and C species to stabilize the single atoms. In addition, the distance of adjacent metal atoms can be turned by adjusting the size of ligands and adding volatile metal centers to promote the formation of isolated metal atoms. Moreover, the diverse metal centers in MOFs can promote the preparation of dual-atom catalysts (DACs) to improve the metal loading and optimize the electronic structures of the catalysts. The applications of MOFs derived SACs and DACs for electrocatalysis, including oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, carbon dioxide reduction reaction and nitrogen reduction reaction are systematically summarized in this Review. The corresponding synthesis strategies, atomic structures and electrocatalytic performances of the catalysts are discussed to provide a deep understanding of MOFs-based atomic electrocatalysts. The catalytic mechanisms of the catalysts are presented, and the crucial challenges and perspectives are proposed to promote further design and applications of atomic electrocatalysts.

Trimetallic MOF-74 Films Grown on Ni Foam as Bifunctional Electrocatalysts for Overall Water Splitting

Developing earth-abundant and high-performance electrocatalysts for water splitting has long been a vital research in energy conversion field. Herein, we report the preparation of a series of trimetallic uniform Mn_x Fe_y Ni-MOF-74 films in-situ grown on nickel foam, which can be utilized as bifunctional electrocatalysts towards overall water splitting in alkaline media. The introduction of Mn can simultaneously regulate the morphology of MOF-74 to form uniform film and modulate electronic structure of Fe to form more Fe(II)-O-Fe(III) motifs, which is conducive to the exposure of active sites and stabilizing high-valent metal sites. The optimized Mn_0.52 Fe_0.71 Ni-MOF-74 film electrode showed excellent electrocatalytic performance, affording a current density of 10 mA ⋅ cm^-2 at an overpotential of 99 mV for HER and 100 mA ⋅ cm^-2 at an overpotential of 267 mV for OER, respectively. Assembled as an electrolyser, Mn_0.52 Fe_0.71 Ni-MOF-74 film electrode exhibited excellent performance towards overall water splitting, with ultralow overpotential of 245 and 462 mV to achieve current density of 10 and 100 mA ⋅ cm^-2 , respectively. This work provides a new view to develop multi-metal MOF-based electrocatalysts.

A Woven Supramolecular Metal-Organic Framework Comprising a Ruthenium Bis(terpyridine) Complex and Cucurbit[8]uril: Enhanced Catalytic Activity toward Alcohol Oxidation

The self-assembly of a diamondoid woven supramolecular metal-organic framework wSMOF-1 has been achieved from intertwined [Ru(tpy)₂ ]²⁺ (tpy=2,2',6',2''-terpyridine) complex M1 and cucurbit[8]uril (CB[8]) in water, where the intermolecular dimers formed by the appended aromatic arms of M1 are encapsulated in CB[8]. wSMOF-1 exhibits ordered pore periodicity in both water and the solid state, as confirmed by a combination of ¹ H NMR spectroscopy, UV-vis absorption, isothermal titration calorimetry, dynamic light scattering, small angle X-ray scattering and selected area electron diffraction experiments. The woven framework has a pore aperture of 2.1 nm, which allows for the free access of both secondary and primary alcohols and tert-butyl hydroperoxide (TBHP). Compared with the control molecule [Ru(tpy)₂ ]Cl₂ , the [Ru(tpy)₂ ]²⁺ unit of wSMOF-1 exhibits a remarkably higher heterogeneous catalysis activity for the oxidation of alcohols by TBHP in n-hexane. For the oxidation of 1-phenylethan-1-ol, the yield of acetophenone was increased from 10 % to 95 %.

Rational Design of a N,S Co-Doped Supermicroporous CoFe-Organic Framework Platform for Water Oxidation

It remains a challenge to rational design of a new metal-organic framework (MOF) as highly efficient direct electrocatalysts for the oxygen evolution reaction (OER). Herein, we developed a simple and effective method to explore a new pillared-layered MOF with syringic acid as a promising OER electrocatalyst. The isostructural mono-, heterobimetallic MOF and N,S co-doped MOF by mixing thiourea were quickly synthesized in a high yield under solvothermal condition. Moreover, the optimized N,S co-doped MOF exhibits the lowest overpotential of 254 mV at 10 mA cm^-2 on a glass carbon electrode and a small Tafel slope of 50 mV dec^-1 , especially, this catalyst also possesses long-term electrochemical durability for at least 16 h. According to the characterization, the incorporation of N and S atoms into this heterobimetallic CoFe-based MOF could modify its pore structure, tune the electronic structure, accordingly, improve the mass and electron transportation, and facilitate the formation of active species, as a consequence, the improved activity of this new N,S co-doped MOF for OER should be mainly be ascribed to higher electrochemical activation toward the active species via in situ surface modification during the OER process.

Hydrophobic MOFs@Metal Nanoparticles@COFs for Interfacially Confined Photocatalysis with High Efficiency

Converting solar energy to chemical energy via photocatalysis has attracted increasing interest. Simultaneously realizing efficient charge separation and fast reactant/product diffusion/transport is highly significant for improving the photocatalytic activity, which however is difficult. Herein, we reported an interfacially confined strategy by constructing interfacial pores as nanoreactors between metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) with controlled surface wettability for efficient photocatalysis. In the sandwich Ti-MOFs@Pt@DM-LZU1, interfacial pores formed between Ti-MOF@Pt and DM-LZU1, in which Pt nanoparticles (NPs) were encapsulated. The presence of Pt facilitates the charge separation on the photoactive Ti-MOF, while the hydrophobic porous DM-LZU1 shell promotes reactant enrichment. Interfacial pores acting as nanoreactors ensure fast electron and mass transport between the active Pt NPs and the concentrated reactants, leading to high photocatalytic activity. This work presents a new concept for the design of various photocatalysts with considerable activity.

Recent Advances in Metal-Organic Frameworks for Photo-/Electrocatalytic CO2 Reduction

Considerable attention has been paid to the utilization of CO₂ , an abundant carbon source in nature. In this regard, porous catalysts have been eagerly explored with excellent performance for photo-/electrocatalytic reduction of CO₂ to high valued products. Metal-organic frameworks (MOFs), featuring large surface area, high porosity, tunable composition and unique structural characteristics, have been widely exploited in catalytic CO₂ reduction. This Minireview first reports the current progress of MOFs in CO₂ reduction. Then, a specific interest is focused on MOFs in photo-/electrocatalytic reduction of CO₂ by modifying their metal centers, organic linkers, and pores. Finally, the future directions of study are also highlighted to satisfy the requirement of practical applications.

Isolated Square-Planar Copper Center in Boron Imidazolate Nanocages for Photocatalytic Reduction of CO2 to CO

Photocatalytic reduction of CO₂ to value-added fuel has been considered to be a promising strategy to reduce global warming and shortage of energy. Rational design and synthesis of catalysts to maximumly expose the active sites is the key to activate CO₂ molecules and determine the reaction selectivity. Herein, we synthesize a well-defined copper-based boron imidazolate cage (BIF-29) with six exposed mononuclear copper centers for the photocatalytic reduction of CO₂ . Theoretical calculations show a single Cu site including weak coordinated water delivers a new state in the conduction band near the Fermi level and stabilizes the *COOH intermediate. Steady-state and time-resolved fluorescence spectra show these Cu sites promote the separation of electron-hole pairs and electron transfer. As a result, the cage achieves solar-driven reduction of CO₂ to CO with an evolution rate of 3334 μmol g^-1  h^-1 and a high selectivity of 82.6 %.

Atomically Dispersed Single Co Sites in Zeolitic Imidazole Frameworks Promoting High-Efficiency Visible-Light-Driven Hydrogen Production

As photocatalysis technology could transform renewable and clean solar energy into green hydrogen (H₂ ) energy through solar water splitting, it is regarded as the "Holy Grail" in chemistry field in the 21st century. Unfortunately, the bottleneck of this technique still lies in the exploration of highly active, cost-effective, and robust photocatalysts. This work reports the design and synthesis of a novel zeolitic imidazole framework (ZIF) coupled Zn_0.8 Cd_0.2 S hetero-structured photocatalyst for high-performance visible-light-induced H₂ production. State-of-the-art characterizations and theoretical computations disclose that the interfacial electronic interaction between ZIF and Zn_0.8 Cd_0.2 S, the high distribution of Zn_0.8 Cd_0.2 S on ZIF, and the atomically dispersed coordinately unsaturated Co sites in ZIF synergistically arouse the significantly improved visible-light photocatalytic H₂ production performance.

Ultrathin Metal-Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible-Light-Driven Photocatalytic H2 Evolution

A surfactant-stabilized coordination strategy is used to make two-dimensional (2D) single-atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre-formed single Pt atom coordinated porphyrin precursors into free-standing metal-organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF-based SACs. Remarkably, the 2D SACs exhibit a record-high photocatalytic H₂ evolution rate of 11 320 μmol g^-1  h^-1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF-based photocatalysts. Moreover, the MOF nanosheets can be readily drop-casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.

Pore-Surface Engineering by Decorating Metal-Oxo Nodes with Phenylsilane to Give Versatile Super-Hydrophobic Metal-Organic Frameworks (MOFs)

Hydrophobization of metal-organic frameworks (MOFs) is important to push forward their practical use and thus has attracted increasing interest. In contrast to the previous reports, which mainly focused on the modification of organic ligands in MOFs, herein, we reported a novel strategy to decorate the metal-oxo nodes of MOFs with phenylsilane to afford super-hydrophobic NH₂ -UiO-66(Zr), which shows highly improved base resistance and holds great promise in versatile applications, such as organic/water separation, self-cleaning, and liquid-marble fabrication. This work demonstrates the first attempt at metal-oxo node modification for super-hydrophobic MOFs, advancing a new concept in the design of MOFs with controlled wettability for practical applications.