Photocorrosion of Cuprous Oxide in Hydrogen Production: Rationalising Self-Oxidation or Self-Reduction

Construction synergetic adsorption and activation surface via confined Cu/Cu2O and Ag nanoparticles on TiO2 for effective conversion of CO2 to CH4

High-performance photocatalysts for catalytic reduction of CO2 are largely impeded by inefficient charge separation and surface activity. Reasonable design and efficient collaboration of multiple active sites are important for attaining high reactivity and product selectivity. Herein, Cu-Cu2O and Ag nanoparticles are confined as dual sites for assisting CO2 photoreduction to CH4 on TiO2. The introduction of Cu-Cu2O leads to an all-solid-state Z-scheme heterostructure on the TiO2 surface, which achieves efficient electron transfer to Cu2O and adsorption and activation of CO2. The confined nanometallic Ag further enhances the carrier's separation efficiency, promoting the conversion of activated CO2 molecules to •COOH and further conversion to CH4. Particularly, this strategy is highlighted on the TiO2 system for a photocatalytic reduction reaction of CO2 and H2O with a CH4 generation rate of 62.5 μmol∙g-1∙h-1 and an impressive selectivity of 97.49 %. This work provides new insights into developing robust catalysts through the artful design of synergistic catalytic sites for efficient photocatalytic CO2 conversion.

The prospect of CuxO-based catalysts in photocatalysis: From pollutant degradation, CO2 reduction, and H2 production to N2 fixation

The topic of photocatalysis and CuxO-based materials has been intertwined for quite a long time. Its relatively high abundance in the earth's crust makes it an important target for researchers around the globe. One of the properties exploited by researchers is its ability to exist in different oxidation states (Cu0, Cu+, Cu2+, and Cu3+) and its implications on photocatalytic efficiency improvement. Recently, they have been extensively used as photocatalytic materials for dye and pollutant degradation. However, it has almost reached saturation levels, therefore, currently, they are being mostly utilized for CO2 reduction and H2 evolution. Hence, this review will discuss the evolution (in application) of CuxO-based photocatalysts, relating to their past, present, and future. Moreover, photocatalytic efficiency improvement strategies such as doping, heterojunction formation, and carbonaceous construction with other materials will also be touched upon. Finally, the prospect of Cu2O-based photocatalysts will be discussed in the field of photocatalytic N2 fixation to ammonia. The significance of N2 chemisorption on photocatalysts to maximize ammonia production will also be given importance.

Stability of Photocathodes: A Review on Principles, Design, and Strategies

Photoelectrochemical devices based on semiconductor photoelectrode can directly convert and store solar energy into chemical fuels. Although the efficient photoelectrodes with commercially valuable solar-to-fuel energy conversion efficiency have been reported over past decades, one of the most enormous challenges is the stability of the photoelectrode due to corrosion during operation. Thus, it is of paramount importance for developing a stable photoelectrode to deploy solar-fuel production. This Review commences with a fundamental understanding of thermodynamics for photoelectrochemical reactions and the fundamentals of photocathodes. Then, the commercial application of photoelectrochemical technology is prospected. We specifically focus on recent strategies for designing photocathodes with long-term stability, including energy band alignment, hole transport/storage/blocking layer, spatial decoupling, grafting molecular catalysts, protective/passivation layer, surface element reconstruction, and solvent effects. Based on the insights gained from these effective strategies, we propose an outlook of key aspects that address the challenges for development of stable photoelectrodes in future work.

Fabrication of direct Z-scheme Cu2O@V-CN (octa) heterojunction with exposed (111) lattice planes and nitrogen-rich vacancies for rapid sterilization

The Z-scheme heterojunction has demonstrated significant potential for promoting photogenerated carrier separation. However, the rational design of all-solid Z-scheme heterojunctions catalysts and the controversies about carrier transfer path of direct Z-scheme heterojunctions catalysts face various challenges. Herein, a novel heterojunction, Cu₂O@V-CN (octa), was fabricated using V-CN (carbon nitride with nitrogen-rich vacancies) in-situ electrostatic self-wrapping Cu₂O octahedra. Density functional theory (DFT) calculations revealed that the separation of carriers across the Cu₂O@V-CN (octa) heterointerface was directly mapped to the Z-scheme mechanism compared to Cu₂O/V-CN (sphere). This is because the Cu₂O octahedra expose more highly active (111) lattice planes with more terminal Cu atoms and V-CN with abundant nitrogen vacancies to form delocalized electronic structures like electronic reservoirs. This facilitates the wrapping of Cu₂O octahedra by V-CN and protects their stability via tighter interfacial contact, thus enhancing the tunneling of carriers for rapid photocatalytic sterilization. These findings provide novel approaches for designing high-efficiency Cu₂O-based photocatalytic antifoulants for practical applications.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Effect of morphology on the photoelectrochemical performance of nanostructured Cu2O photocathodes

Cu₂O is a promising earth-abundant semiconductor photocathode for sunlight-driven water splitting. Characterization results are presented to show how the photocurrent density (J_ph), onset potential (E_onset), band edges, carrier density (N_A), and interfacial charge transfer resistance (R_ct) are affected by the morphology and method used to deposit Cu₂O on a copper foil. Mesoscopic and planar morphologies exhibit large differences in the values ofN_AandR_ct. However, these differences are not observed to translate to other photocatalytic properties of Cu₂O. Mesoscopic and planar morphologies exhibit similar bandgap (e.g.) and flat band potential (E_fb) values of 1.93 ± 0.04 eV and 0.48 ± 0.06 eV respectively.E_onsetof 0.48 ± 0.04 eV obtained for these systems is close to theE_fbindicating negligible water reduction overpotential. Electrochemically deposited planar Cu₂O provides the highest photocurrent density of 5.0 mA cm^-2at 0 V vs reversible hydrogen electrode (RHE) of all the morphologies studied. The photocurrent densities observed in this study are among the highest reported values for bare Cu₂O photocathodes.

Metal-Organic Framework Decorated Cuprous Oxide Nanowires for Long-lived Charges Applied in Selective Photocatalytic CO2 Reduction to CH4

Improving the stability of cuprous oxide (Cu₂ O) is imperative to its practical applications in artificial photosynthesis. In this work, Cu₂ O nanowires are encapsulated by metal-organic frameworks (MOFs) of Cu₃ (BTC)₂ (BTC=1,3,5-benzene tricarboxylate) using a surfactant-free method. Such MOFs not only suppress the water vapor-induced corrosion of Cu₂ O but also facilitate charge separation and CO₂ uptake, thus resulting in a nanocomposite representing 1.9 times improved activity and stability for selective photocatalytic CO₂ reduction into CH₄ under mild reaction conditions. Furthermore, direct transfer of photogenerated electrons from the conduction band of Cu₂ O to the LUMO level of non-excited Cu₃ (BTC)₂ has been evidenced by time-resolved photoluminescence. This work proposes an effective strategy for CO₂ conversion by a synergy of charge separation and CO₂ adsorption, leading to the enhanced photocatalytic reaction when MOFs are integrated with metal oxide photocatalyst.

Efficient sequential harvesting of solar light by heterogeneous hollow shells with hierarchical pores

In nature, sequential harvesting of light widely exists in the old life entity, i.e. cyanobacteria, to maximize the light absorption and enhance the photosynthesis efficiency. Inspired by nature, we propose a brand new concept of temporally-spatially sequential harvesting of light in one single particle, which has purpose-designed heterogeneous hollow multi-shelled structures (HoMSs) with porous shells composed of nanoparticle subunits. Structurally, HoMSs consist of different band-gap materials outside-in, thus realizing the efficient harvesting of light with different wavelengths. Moreover, introducing oxygen vacancies into each nanoparticle subunit can also enhance the light absorption. With the benefit of sequential harvesting of light in HoMSs, the quantum efficiency at wavelength of 400 nm is enhanced by six times compared with the corresponding nanoparticles. Impressively, using these aforementioned materials as photocatalysts, highly efficient photocatalytic water splitting is realized, which cannot be achieved by using the nanoparticle counterparts. This new concept of temporally-spatially sequential harvesting of solar light paves the way for solving the ever-growing energy demand.

Smart Porous Core-Shell Cuprous Oxide Nanocatalyst with High Biocompatibility for Acid-Triggered Chemo/Chemodynamic Synergistic Therapy

The rational integration of chemotherapy and hydroxyl radical (·OH)-mediated chemodynamic therapy (CDT) holds great potential for cancer treatment. Herein, a smart biocompatible nanocatalyst based on porous core-shell cuprous oxide nanocrystals (Cu₂ O-PEG (polyethylene glycol) NCs) is reported for acid-triggered chemo/chemodynamic synergistic therapy. The in situ formed high density of hydrophilic PEG outside greatly improves the stability and compatibility of NCs. The porosity of Cu₂ O-PEG NCs shows the admirable capacity of doxorubicin (DOX) loading (DOX@Cu₂ O-PEG NCs) and delivery. Excitingly, Cu (Cu^+/2+ ) and DOX can be controllably released from DOX@Cu₂ O-PEG NCs in a pH-responsive approach. The released Cu⁺ exerts Fenton-like catalytic activity to generate toxic ·OH from intracellular overexpressed hydrogen peroxide (H₂ O₂ ) for CDT via reactive oxygen species (ROS)-involved oxidative damage. Exactly, DOX can not only induce cell death for chemotherapy but also enhance CDT by self-supplying endogenous H₂ O₂ . After the intravenous injection, Cu₂ O-PEG NCs can effectively accumulate in tumor region via passive targeting improved by external high-density PEG shell. Additionally, the effect of boosted CDT combined with chemotherapy presents excellent in vivo antitumor ability without causing distinct systemic toxicity. It is believed that this smart nanocatalyst responding to the acidity provides a novel paradigm for site-specific cancer synergetic therapy.

Photocatalytic and Photoelectrochemical Systems: Similarities and Differences

Photocatalytic and photoelectrochemical processes are two key systems in harvesting sunlight for energy and environmental applications. As both systems are employing photoactive semiconductors as the major active component, strategies have been formulated to improve the properties of the semiconductors for better performances. However, requirements to yield excellent performances are different in these two distinctive systems. Although there are universal strategies applicable to improve the performance of photoactive semiconductors, similarities and differences exist when the semiconductors are to be used differently. Here, considerations on selected typical factors governing the performances in photocatalytic and photoelectrochemical systems, even though the same type of semiconductor is used, are provided. Understanding of the underlying mechanisms in relation to their photoactivities is of fundamental importance for rational design of high-performing photoactive materials, which may serve as a general guideline for the fabrication of good photocatalysts or photoelectrodes toward sustainable solar fuel generation.

Industrial carbon dioxide capture and utilization: state of the art and future challenges

This review covers the sustainable development of advanced improvements in CO₂ capture and utilization.

g-C3N4 foam/Cu2O QDs with excellent CO2 adsorption and synergistic catalytic effect for photocatalytic CO2 reduction

A unique heterostructure is developed based on a 3D photoactive semiconductor and a 0D Cu₂O QDs for superb photocatalytic reduction CO₂ into CO. It reported a novel and simple method to prepare a 3D g-C₃N₄ foam with micron-sized porous structures using ultrastable foam as a soft template for the first time. Moreover, Cu₂O QDs are loaded onto 3D g-C₃N₄ foam through a simple photodeposition strategy. Systematically characterization demonstrated that g-C₃N₄ foam not only act as an excellent carrier for Cu₂O QDs, but also greatly improve the photocatalytic performance by enhancing CO₂ adsorption and gas transfer. Simultaneously, the rationally designed g-C₃N₄ foam/Cu₂O QDs exhibited notablely enhancement in photocatalytic performance with 3.9 times and 11 times higher than that of g-C₃N₄ foam and bulk g-C₃N₄ powder. The excellent photocatalytic activity can be attributed to the unique porous structure and the synergistic effect between g-C₃N₄ foam and Cu₂O QDs, which can speed up the transfer of charge carriers and urged the cumulation of photo-generated electrons on the Cu₂O QDs. Our work provides new ideas for constructing 0D/3D hierarchical photocatalytic systems, which may provide guidance on designing efficient photocatalysts to maximize photocatalyst kinetics.

Solar-Driven Water-Gas Shift Reaction over CuOx /Al2 O3 with 1.1 % of Light-to-Energy Storage

Hydrogen production from coal gasification provides a cleaning approach to convert coal resource into chemical energy, but the key procedures of coal gasification and thermal catalytic water-gas shift (WGS) reaction in this energy technology still suffer from high energy cost. We herein propose adopting a solar-driven WGS process instead of traditional thermal catalysis, with the aim of greatly decreasing the energy consumption. Under light irradiation, the CuO_x /Al₂ O₃ delivers excellent catalytic activity (122 μmol g_cat ^-1  s^-1 of H₂ evolution and >95 % of CO conversion) which is even more efficient than noble-metal-based catalysts (Au/Al₂ O₃ and Pt/Al₂ O₃ ). Importantly, this solar-driven WGS process costs no electric/thermal power but attains 1.1 % of light-to-energy storage. The attractive performance of the solar-driven WGS reaction over CuO_x /Al₂ O₃ can be attributed to the combined photothermocatalysis and photocatalysis.