A Multi-Ion Strategy towards Rechargeable Sodium-Ion Full Batteries with High Working Voltage and Rate Capability

Off-Stoichiometry of Sodium Iron Pyrophosphate as Cathode Materials for Sodium-Ion Batteries with Superior Cycling Stability

As one of the important devices for large-scale electrochemical energy storage, sodium-ion batteries have received much attention due to the abundant resources of raw materials. However, whether it is a base station power source, an energy storage power station, or a start-stop power supply, long energy cycle life (more than 5000 cycles), high stability, and safety performance are application prerequisites. Regrettably, currently, few sodium-ion batteries can meet this requirement, mainly due to shortcomings in positive electrode performance. We report a sufficiently stable sodium-ion battery cathode material, Na2Fe0.95P2O7, that retains 97.5% capacity after 5000 charge/discharge cycles. The use of nonstoichiometry in the lattice enables simultaneous modification of the crystal and electronic structure, promoting Na2Fe0.95P2O7 to be extremely stable while still being able to achieve a capacity of 92 mAh g-1 and stable cycling at high temperatures up to 60 °C. Our results confirm the positive effect of nonstoichiometric ratios on the performance of Na2Fe0.95P2O7 and provide a reliable idea to promote the practical application of sodium-ion batteries.

Biomass-Derived Hard Carbon for Sodium-Ion Batteries: Basic Research and Industrial Application

Sodium-ion batteries (SIBs) have significant potential for applications in portable electric vehicles and intermittent renewable energy storage due to their relatively low cost. Currently, hard carbon (HC) materials are considered commercially viable anode materials for SIBs due to their advantages, including larger capacity, low cost, low operating voltage, and inimitable microstructure. Among these materials, renewable biomass-derived hard carbon anodes are commonly used in SIBs. However, the reports about biomass hard carbon from basic research to industrial applications are very rare. In this paper, we focus on the research progress of biomass-derived hard carbon materials from the following perspectives: (1) sodium storage mechanisms in hard carbon; (2) optimization strategies for hard carbon materials encompassing design, synthesis, heteroatom doping, material compounding, electrolyte modulation, and presodiation; (3) classification of different biomass-derived hard carbon materials based on precursor source, a comparison of their properties, and a discussion on the effects of different biomass sources on hard carbon material properties; (4) challenges and strategies for practical of biomass-derived hard carbon anode in SIBs; and (5) an overview of the current industrialization of biomass-derived hard carbon anodes. Finally, we present the challenges, strategies, and prospects for the future development of biomass-derived hard carbon materials.

Confined WS2 Nanosheets Tubular Nanohybrid as High-Kinetic and Durable Anode for Sodium-Based Dual Ion Batteries

Sodium based dual-ion battery (SDIB) has been regarded as one of the promising batteries technologies thanks to its high working voltage and natural abundance of sodium source, its practical application yet faces critical issues of low capacity and sluggish kinetics of intercalation-type graphite anode. Here, a tubular nanohybrid composed of building blocks of carbon-film wrapped WS₂ nanosheets on carbon nanotube (WS₂ /C@CNTs) was reported. The expanded (002) interlayer and dual-carbon confined structure endowed WS₂ nanosheets with fast charge transportation and excellent structural stability, and thus WS₂ /C@CNTs showed highly attractive electrochemical properties for Na⁺ storage with high reversible capacity, fast kinetic, and robust durability. The full sodium-based dual ion batteries by coupling WS₂ /C@CNTs anode with graphite cathode full cell presented a high reversible capacity (210 mAh g^-1 at 0.1 A g^-1 ), and excellent rate performance with a high capacity of 137 mAh g^-1 at 5.0 A g^-1 .

Novel Lamellar Tetrapotassium Pyromellitic Organic for Robust High-Capacity Potassium Storage

Redox-active organics are investigation hotspots for metal ion storage due to their structural diversity and redox reversibility. However, they are plagued by limited storage capacity, sluggish ion diffusion kinetics, and weak structural stability, especially for K⁺ ion storage. Herein, we firstly reported the lamellar tetrapotassium pyromellitic (K₄ PM) with four active sites and large interlayer distance for K⁺ ion storage based on a design strategy, where organics are constructed with the small molecular mass, multiple active sites, fast ion diffusion channels, and rigid conjugated π bonds. The K₄ PM electrode delivers a high capacity up to 292 mAh g^-1 at 50 mA g^-1 , among the best reported organics for K⁺ ion storage. Especially, it achieves an excellent rate capacity and long-term cycling stability with a capacity retention of ≈83 % after 1000 cycles. Incorporating in situ and ex-situ techniques, the K⁺ ion storage mechanism is revealed, where conjugated carboxyls are reversibly rearranged into enolates to stably store K⁺ ions. This work sheds light on the rational design and optimization of organic electrodes for efficient metal ion storage.

Temperature-Dependent Electrochemical Properties and Electrode Kinetics of Na3 V2 (PO4 )2 O2 F Cathode for Sodium-Ion Batteries with High Energy Density

Phosphate cathode materials are practical for use in sodium-ion batteries (SIBs) owing to their high stability and long-term cycle life. In this work, the temperature-dependent properties of the phosphate cathode Na₃ V₂ (PO₄ )₂ O₂ F (NVPOF) are studied in a wide temperature range from -25 to 55 °C. Upon cycling at general temperature (above 0 °C), the NVPOF cathode retains an excellent charge/discharge performance, and the rate capability is noteworthy, indicating that NVPOF is a competitive candidate as a temperature-adaptive cathode for SIBs. Upon decreasing the temperature below 0 °C, the cell performance deteriorates, which may be caused by the electrolyte and Na electrode, based on the study of ionic conductivity and electrode kinetics. This work proposes a new breakthrough point for the development of SIBs with high performance over a wide temperature range for advanced power systems.

Thermodynamic analysis and kinetic optimization of high-energy batteries based on multi-electron reactions

Multi-electron reaction can be regarded as an effective way of building high-energy systems (>500 W h kg⁻¹). However, some confusions hinder the development of multi-electron mechanisms, such as clear concept, complex reaction, material design and electrolyte optimization and full-cell fabrication. Therefore, this review discusses the basic theories and application bottlenecks of multi-electron mechanisms from the view of thermodynamic and dynamic principles. In future, high-energy batteries, metal anodes and multi-electron cathodes are promising electrode materials with high theoretical capacity and high output voltage. While the primary issue for the multi-electron transfer process is sluggish kinetics, which may be caused by multiple ionic migration, large ionic radius, high reaction energy barrier, low electron conductivity, poor structural stability, etc., it is urgent that feasible and versatile modification methods are summarized and new inspiration proposed in order to break through kinetic constraints. Finally, the remaining challenges and future research directions are revealed in detail, involving the search for high-energy systems, compatibility of full cells, cost control, etc.

Exploiting Mechanistic Solvation Kinetics for Dual-Graphite Batteries with High Power Output at Extremely Low Temperature

Improving the extremely low temperature operation of rechargeable batteries is vital to the operation of electronics in extreme environments, where systems capable of high-rate discharge are in short supply. Herein, we demonstrate the holistic design of dual-graphite batteries, which circumvent the sluggish ion-desolvation process found in typical lithium-ion batteries during discharge. These batteries were enabled by a novel electrolyte, which simultaneously provides high electrochemical stability and ionic conductivity at low temperature. The dual-graphite cells, when compared to industry-type graphite ∥ LiCoO₂ full-cells demonstrated an 11 times increased capacity retention at -60 °C for a 10 C discharge rate, indicative of the superior kinetics of the "dual-ion" storage mechanism. These trends are further supported by galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS) measurements at reduced temperature. This work provides a new design strategy for extreme low-temperature batteries.

Self-Supporting, Flexible, Additive-Free, and Scalable Hard Carbon Paper Self-Interwoven by 1D Microbelts: Superb Room/Low-Temperature Sodium Storage and Working Mechanism

Hard carbon is regarded as a promising anode material for sodium-ion batteries (SIBs). However, it usually suffers from the issues of low initial Coulombic efficiency (ICE) and poor rate performance, severely hindering its practical application. Herein, a flexible, self-supporting, and scalable hard carbon paper (HCP) derived from scalable and renewable tissue is rationally designed and prepared as practical additive-free anode for room/low-temperature SIBs with high ICE. In ether electrolyte, such HCP achieves an ICE of up to 91.2% with superior high-rate capability, ultralong cycle life (e.g., 93% capacity retention over 1000 cycles at 200 mA g^-1 ) and outstanding low-temperature performance. Working mechanism analyses reveal that the plateau region is the rate-determining step for HCP with a lower electrochemical reaction kinetics, which can be significantly improved in ether electrolyte.