Stress-Induced Inversion of Linear Dichroism by 4,4'-Bipyridine Rotation in a Superelastic Organic Single Crystal

The molecular crystals that manifest unusual mechanical properties have attracted growing attention. Herein, we prepared an organic single crystal that shows bidirectional superelastic transformation in response to shear stress. Single-crystal X-ray diffractions revealed this crystal-twinning related shape change is owed to a stress-controlled 90° rotation of 4,4'-bipyridine around the hydrogen bonds of a chiral organic trimer. As a consequence of the 90° shift in the aromatic plane, an interconversion of crystallographic a-, b-axes (a→b' and b→a') was detected. The molecular rotations changed the anisotropic absorption of linearly polarized light. Therefore, a stress-induced inversion of linear dichroism spectra was demonstrated for the first time. This study reveals the superior mechanical flexibilities of single crystals can be realized by harnessing the molecular rotations and this superelastic crystal may find applications in optical switching and communications.

Global Analysis of the Mechanical Properties of Organic Crystals

Organic crystals, although widely studied, have not been considered nascent candidate materials in the engineering design. Here we summarize the reported mechanical properties of organic crystals reported over the past three decades, and we establish a global mechanical property profile that can be used to predict and identify mechanically robust organic crystals. Being composed of light elements, organic crystals populate a narrow region in the mechanical property-density space between soft, disordered organic materials and stiff, ordered materials. Two subsets of extraordinarily stiff and hard organic crystalline materials were identified and rationalized by the normalized number density, strength and directionality of their intermolecular interactions. We conclude that the future light-weight, soft, all-organic components in devices should capitalize on the combination of long-range structural order and softness as the greatest asset of organic single crystals.

Thermo-Induced Single-Crystal-to-Single-Crystal Transformations and Photo-Induced [2+2] Cycloaddition Reactions in Polymorphs of Chalcone-Based Molecular Crystals: Multi-Stimuli Responsive Actuators

The polymorphs of 2ClChMe-4 in Form I (ribbon-like crystal) and Form II (block-like crystal) were prepared, and they exhibited curling/flipping and expansion upon heating on account of single-crystal-to-single-crystal transformations. The irreversible phase transformations occurred separately at 53.2 °C and 57.8 °C for the crystals in Form I and Form II, during which the molecular conformation of 2ClChMe-4 changed and the molecules slipped along the (100) plane. Movement at the molecular level resulted in changes of cell parameters, which in turn led to macroscopic motions of the crystals upon heating. Additionally, the ribbon-like crystals of 2ClChMe-4 showed photo-induced bending driven by [2+2] cycloaddition. Accordingly, an actuator showing reversible bending behavior was fabricated triggered by light and heat successively. Like biomimetic self-actuators, such multi-stimuli mechanical responsive molecular crystals might have potential applications in soft robots, artificial muscles and microfluidic systems.

Mechanical Motion in Crystals Triggered by Solid State Photochemical [2+2] Cycloaddition Reaction

Some special crystals respond to light by jumping, scattering or bursting just like popping of popcorn kernels on a hot surface. This rare phenomenon is called the photosalient (PS) effect. Molecular level control over the arrangement of light-responsive molecules in microscopic crystals for macroscale deformation or mechanical motion offers the possibility of using light to control smart material structures across the length scales. Photochemical [2+2] cycloaddition has recently emerged as a promising route to obtain photoswitchable structures and a wide variety of frameworks, but such reaction in crystals leading to macroscopic mechanical motion is relatively less explored. Study of chemistry of such novel soft crystals for the generation of smart materials is an imperative task. This minireview highlights recent advances in solid-state [2+2] cycloaddition in crystals to induce macroscale mechanical motion and thereby transduction of light into kinetic energy.

Bending for Better: Flexible Organic Single Crystals with Controllable Curvature and Curvature-Related Conductivity for Customized Electronic Devices

Electronic microdevices of self-bending coronene crystals are developed to reveal an unexplored link between mechanical deformation and crystal function. First, a facile approach towards length/width/curvature-controllable micro-crystals through bottom-up solution crystallization was proposed for high processability and stability. The bending crystal devices show a significant increase beyond seven orders of magnitude in conductivity than the straight ones, providing the first example of deformation-induced function enhancement in crystal materials. Besides, double effects caused by bending, including the change of π electron level as well as the enhancement of carrier mobility, were determined, respectively by the X-ray photoelectric spectroscopy and X-ray crystallography to coexist, contributing to the conductivity improvement. Our findings will promote future creation of flexible organic crystal systems with deformation-enhanced functional features towards customized smart devices.

Enabling Control over Mechanical Conformity and Luminescence in Molecular Crystals: Interaction Engineering in Action

Molecular crystals of π-conjugated molecules are of great interest as the highly ordered dense packing offers superior charge and exciton transport compared with its amorphous counterparts. However, integration into optoelectronic devices remains a major challenge owing to its inherently brittle nature. Herein, control over the mechanical conformity in single crystals of pyridine-appended thiazolothiazole derivatives is reported by modulating the molecular packing through interaction engineering. Two polymorphs were prepared by achieving control over the thermodynamic/kinetic factors of crystallization; one of the polymorphs exhibits elastic bending whereas the other is brittle. The control over the bending ability was achieved by forming co-crystals with hydrogen/halogen bond donors. A seamless extended crisscross pattern with respect to the bend plane through a ditopic hydrogen-bonding motif showed the highest compliance towards mechanical bending, whereas the co-crystals with a layered crisscross arrangement with segregated layers of co-formers exhibit slightly lower bending conformity. These results update the rationale behind the plastic/elastic bending in molecular crystals. The co-crystals of ditopic halogen bond co-assemblies are particularly appealing for waveguiding applications as the co-crystals blend high mechanical flexibility and luminescence properties. The hydrogen bonded co-crystals are non-emissive in nature owing to excited state proton transfer dynamics. The rationale behind the fluorescence properties of these materials was also established from DFT calculations in a quantum mechanics/molecular mechanics (QM/MM) framework.

Self-Waveguide Single-Benzene Organic Crystal with Ultralow-Temperature Elasticity as a Potential Flexible Material

With the increasing popularity and burgeoning progress of space technology, the development of ultralow-temperature flexible functional materials is a great challenge. Herein, we report a highly emissive organic crystal combining ultralow-temperature elasticity and self-waveguide properties (when a crystal is excited, it emits light from itself, which travels through the crystal to the other end) based on a simple single-benzene emitter. This crystal displayed excellent elastic bending ability in liquid nitrogen (LN). Preliminary experiments on optical waveguiding in the bent crystal demonstrated that the light generated by the crystal itself could be confined and propagated within the crystal body between 170 and -196 °C. These results not only suggest a guideline for designing functional organic crystals with ultralow-temperature elasticity but also expand the application region of flexible materials to extreme environments, such as space technology.

Crystals of Benzamide, the First Polymorphous Molecular Compound, Are Helicoidal

The growth of spontaneously twisted crystals is a common but poorly understood phenomenon. An analysis of the formation of twisted crystals of a metastable benzamide polymorph (form II) crystallizing from highly supersaturated aqueous and ethanol solutions is given here. Benzamide, the first polymorphic molecular crystal reported (1832), would have been the first helicoidal crystal observed had the original authors undertaken an analysis by light microscopy. Polymorphism and twisting frequently concur as they are both associated with high thermodynamic driving forces for crystallization. Optical and electron microscopies as well as electron and powder X-ray diffraction reveal a complex lamellar structure of benzamide form II needle-like crystals. The internal stress produced by the overgrowth of lamellae is shown to be able to create a twist moment that is responsible for the observed non-classical morphologies.

Mechanophotonics: Flexible Single-Crystal Organic Waveguides and Circuits

We present the one-dimensional optical-waveguiding crystal dithieno[3,2-a:2',3'-c]phenazine with a high aspect ratio, high mechanical flexibility, and selective self-absorbance of the blue part of its fluorescence (FL). While macrocrystals exhibit elasticity, microcrystals deposited at a glass surface behave more like plastic crystals due to significant surface adherence, making them suitable for constructing photonic circuits via micromechanical operation with an atomic-force-microscopy cantilever tip. The flexible crystalline waveguides display optical-path-dependent FL signals at the output termini in both straight and bent configurations, making them appropriate for wavelength-division multiplexing technologies. A reconfigurable 2×2-directional coupler fabricated via micromanipulation by combining two arc-shaped crystals splits the optical signal via evanescent coupling and delivers the signals at two output terminals with different splitting ratios. The presented mechanical micromanipulation technique could also be effectively extended to other flexible crystals.

A Mechanistic Perspective on Plastically Flexible Coordination Polymers

Mechanical flexibility in single crystals of covalently bound materials is a fascinating and poorly understood phenomenon. We present here the first example of a plastically flexible one-dimensional (1D) coordination polymer. The compound [Zn(μ-Cl)2 (3,5-dichloropyridine)2 ]n is flexible over two crystallographic faces. Remarkably, the single crystal remains intact when bent to 180°. A combination of microscopy, diffraction, and spectroscopic studies have been used to probe the structural response of the crystal lattice to mechanical bending. Deformation of the covalent polymer chains does not appear to be responsible for the observed macroscopic bending. Instead, our results suggest that mechanical bending occurs by displacement of the coordination polymer chains. Based on experimental and theoretical evidence, we propose a new model for mechanical flexibility in 1D coordination polymers. Moreover, our calculations propose a cause of the different mechanical properties of this compound and a structurally similar elastic material.

An Organic Crystal with High Elasticity at an Ultra-Low Temperature (77 K) and Shapeability at High Temperatures

Organic single crystals with elastic bending capability and potential applications in flexible devices and sensors have been elucidated. Exploring the temperature compatibility of elasticity is essential for defining application boundaries of elastic materials. However, related studies have rarely been reported for elastic organic crystals. Now, an organic crystal displays elasticity even in liquid nitrogen (77 K). The elasticity can be maintained below ca. 150 °C. At higher temperatures, the heat setting property enables us to make various shapes of crystalline fibers based on this single kind of crystal. Through detailed crystallographic analyses and contrast experiments, the mechanisms behind the unusual low-temperature elasticity and high-temperature heat setting are disclosed.