Chiral Cpx Rhodium(III)-Catalyzed Enantioselective Aziridination of Unactivated Terminal Alkenes

Chiral cyclopentadienyl-rhodium(III) Cpx Rh(III) catalysis has been demonstrated to be competent for catalyzing highly enantioselective aziridination of challenging unactivated terminal alkenes and nitrene sources. The chiral Cpx Rh(III) catalysis system exhibited outstanding catalytic performance and wide functional group tolerance, yielding synthetically important and highly valuable chiral aziridines with good to excellent yields and enantioselectivities (up to 99 % yield, 93 % ee). This protocol presents a novel and effective strategy for synthesizing enantioenriched aziridines from simple alkenes. Various transformations were performed on the aziridine products, illustrating the versatility and synthetic potential of this protocol for constructing highly functionalized compounds.

Enantio- and Regioselective Electrooxidative Cobalt-Catalyzed C-H/N-H Annulation with Alkenes

In recent years, the merging of electrosynthesis with 3d metal catalyzed C-H activation has emerged as a sustainable and powerful technique in organic synthesis. Despite the impressive advantages, the development of an enantioselective version remains elusive and poses a daunting challenge. Herein, we report the first electrooxidative cobalt-catalyzed enantio- and regioselective C-H/N-H annulation with olefins using an undivided cell at room temperature (up to 99 % ee). ^t Bu-Salox, a rationally designed Salox ligand bearing a bulky tert-butyl group at the ortho-position of phenol, was found to be crucial for this asymmetric annulation reaction. A strong cooperative effect between ^t Bu-Salox and 3,4,5-trichloropyridine enabled the highly enantio- and regioselective C-H annulation with the more challenging α-olefins without secondary bond interactions (up to 96 % ee and 97 : 3 rr). Cyclovoltametric studies, and the preparation, characterization, and transformation of cobaltacycle intermediates shed light on the mechanism of this reaction.

Enantioselective C-H Bond Functionalization Involving Arene Ruthenium(II) Catalysis

The p-Cymene ruthenium(II) complex is one of the most widely used catalysts in C-H activation. However, enantioselective C-H activation promoted by arene ruthenium(II) complexes has not been realized until recently. The revealed strategies include intramolecular nitrene C-H insertion, the use of chiral transient directing groups, chiral carboxylic acid, relay catalysis, and chiral arene ligands. In this minireview, these advances are summarized and discussed in the hope of spurring further developments.

C-H Activation of Inert Arenes using a Photochemically Activated Guanidinato-Magnesium(I) Compound

UV irradiation of solutions of a guanidinate coordinated dimagnesium(I) compound, [{(Priso)Mg}2 ] 3 (Priso=[(DipN)2 CNPri 2 ]- , Dip=2,6-diisopropylphenyl), in either benzene, toluene, the three isomers of xylene, or mesitylene, leads to facile activation of an aromatic C-H bond of the solvent in all cases, and formation of aryl/hydride bridged magnesium(II) products, [{(Priso)Mg}2 (μ-H)(μ-Ar)] 4-9. In contrast to similar reactions reported for β-diketiminate coordinated counterparts of 3, these C-H activations proceed with little regioselectivity, though they are considerably faster. Reaction of 3 with an excess of the pyridine, p-NC5 H4 But (pyBut ), gave [(Priso)Mg(pyBut H)(pyBut )2 ] 10, presumably via reduction of the pyridine to yield a radical intermediate, [(Priso)Mg(pyBut ⋅)(pyBut )2 ] 11, which then abstracts a proton from the reaction solvent or a reactant. DFT calculations suggest two possible pathways to the observed arene C-H activations. One of these involves photochemical cleavage of the Mg-Mg bond of 3, generating magnesium(I) doublet radicals, (Priso)Mg⋅. These then doubly reduce the arene substrate to give "Birch-like" products, which subsequently rearrange via C-H activation of the arene. Circumstantial evidence for the photochemical generation of transient magnesium radical species includes the fact that irradiation of a cyclohexane solution of 3 leads to an intramolecular aliphatic C-H activation process and formation of an alkyl-bridged magnesium(II) species, [{Mg(μ-Priso-H )}2 ] 12. Furthermore, irradiation of a 1 : 1 mixture of 3 and the β-diketiminato dimagnesium(I) compound, [{(Dip Nacnac)Mg}2 ] (Dip Nacnac=[HC(MeCNDip)2 ]- ), effects a "scrambling" reaction, and the near quantitative formation of an unsymmetrical dimagnesium(I) compound, [(Priso)Mg-Mg(Dip Nacnac)] 13. Finally, the EPR spectrum (77 K) of a glassed solution of UV irradiated 3 is dominated by a broad featureless signal, indicating the presence of a doublet radical species.

Ruthenium(II)/Imidazolidine Carboxylic Acid-Catalyzed C-H Alkylation for Central and Axial Double Enantio-Induction

Enantioselective C-H activation has surfaced as a transformative toolbox for the efficient assembly of chiral molecules. However, despite of major advances in rhodium and palladium catalysis, ruthenium(II)-catalyzed enantioselective C-H activation has thus far largely proven elusive. In contrast, we herein report on a ruthenium(II)-catalyzed highly regio-, diastereo- and enantioselective C-H alkylation. The key to success was represented by the identification of novel C2-symmetric chiral imidazolidine carboxylic acids (CICAs), which are easily accessible in a one-pot fashion, as highly effective chiral ligands. This ruthenium/CICA system enabled the efficient installation of central and axial chirality, and featured excellent branched to linear ratios with generally >20 : 1 dr and up to 98 : 2 er. Mechanistic studies by experiment and computation were carried out to understand the catalyst mode of action.

Recent Advances in Transition-Metal-Catalyzed C-H Functionalization of Ferrocene Amides

During the past decades, in synthetic organic chemistry, directing-group-assisted C-H functionalization is found to be a key tool for the expedient and site-selective construction of C-C and hybrid bonds. Among C-H functionalization of ferrocene derivatives, the directed group strategy is undoubtedly the most commonly used method. Compared to the other directing groups, ferrocene amides can be synthesized easily and are now recognized as one of the most efficient devices for the selective functionalization of certain positions because its metal centre permits fine, tuneable and reversible coordination. The family of amide directing groups mainly comprises monodentate and bidentate directing groups, which are categorized on the basis of coordination sites. In this review, various C-H bond functionalization reactions of ferrocene using amide directing groups are broadly discussed.

Cobalt(III)/Chiral Carboxylic Acid-Catalyzed Enantioselective Synthesis of Benzothiadiazine-1-oxides via C-H Activation

Among sulfoximine derivatives containing a chiral sulfur center, benzothiadiazine-1-oxides are important for applications in medicinal chemistry. Here, we report that the combination of an achiral cobalt(III) catalyst and a pseudo-C₂ -symmetric H₈ -binaphthyl chiral carboxylic acid enables the asymmetric synthesis of benzothiadiazine-1-oxides from sulfoximines and dioxazolones via enantioselective C-H bond cleavage. With the optimized protocol, benzothiadiazine-1-oxides with several functional groups can be accessed with high enantioselectivity.

Cobalt/Salox-Catalyzed Enantioselective C-H Functionalization of Arylphosphinamides

Previous methods on Co^III -catalyzed asymmetric C-H activation rely on the use of tailor-made cyclopentadienyl-ligated Co^III complexes, which require lengthy steps for the preparation. Herein, we report an unprecedented enantioselective C-H functionalization enabled by a simple cobalt/salicyloxazoline (Salox) catalysis. The chiral Salox ligands can be easily prepared in one step from salicylonitrile and chiral amino alcohols. A broad range of P-stereogenic compounds were synthesized in high yields with excellent enantioselectivities (45 examples, up to 99 % yield and >99 % ee). The isolation and characterization of several intermediates provided insights into the generation of active catalytic cobalt species, the action of Salox, and the mode of stereocontrol.

A Class of Readily Tunable Planar-Chiral Cyclopentadienyl Rhodium(III) Catalysts for Asymmetric C-H Activation

Chiral half-sandwich cyclopentadienyl rhodium(III) (CpRh^III ) complexes are powerful catalysts for promoting asymmetric C-H activation reactions. Their preparation normally involved linking or embedding the Cp motif to or into a certain chiral backbone to forge the so-called chiral Cp ligand. However, preparation of a planar-chiral CpRh^III catalyst bearing a non-chiral Cp ligand remains a formidable challenge and is rarely reported. We describe herein an unusual class of planar-chiral rhodium catalysts bearing non-chiral Cp ligands. Different from existing ones, this catalyst is readily tunable. Ten planar-chiral only CpRh^III catalysts were prepared with ease, and successfully used in two enantioselective C-H activation reactions. Given its convenient synthesis and high structural tunability, these catalysts are expected to find more utilities in asymmetric C-H activation.

Experimental and Computational Studies on the Directing Ability of Chalcogenoethers in Palladium-Catalyzed Atroposelective C-H Olefination and Allylation

We present herein our experimental and DFT computational studies on the directing ability of chalcogenoether motifs in Pd-catalyzed atroposelective C-H functionalization. The thioether motif was found to be a superior directing group compared to the corresponding ether and selenoether in terms of reactivity and enantiocontrol. Remarkably, DFT calculation provided a predictive model for the optimization of reaction conditions and the interpretation of the origin of enantioselectivity. Both Pd-catalyzed enantioselective C-H olefination and allylation reactions were successfully developed using chiral phosphoric acids as efficient ligands, providing a broad range of axially chiral biaryls in good yields with excellent enantioselectivities. The highly enantio- and diastereoselective construction of polyaryls bearing multiple stereogenic axes, gram-scale reaction and various chemical transformations make this protocol more attractive and significant.

Rhodium-Catalyzed Atroposelective Access to Axially Chiral Olefins via C-H Bond Activation and Directing Group Migration

Axially chiral open-chain olefins represent an underexplored class of chiral platform. In this report, two classes of tetrasubstituted axially chiral acyclic olefins have been accessed in excellent enantioselectivity and regioselectivity via C-H activation of (hetero)arenes assisted by a migratable directing group en route to coupling with sterically hindered alkynes. The coupling of indoles bearing an N-aminocarbonyl directing group afforded C-N axially chiral acrylamides with the assistance of a racemic zinc carboxylate additive. DFT studies suggest a β-nitrogen elimination-reinsertion pathway for the directing group migration. Meanwhile, the employment of N-phenoxycarboxamide delivered C-C axially chiral enamides via migration of the oxidizing directing group. Experiments suggest that in both cases the (hetero)arene substrate adopts a well-defined orientation during the C-H activation, which in turn determines the disposition of the alkyne in migratory insertion. Synthetic applications of representative chiral olefins are demonstrated.

Synthesis of Chiral Spirolactams via Sequential C-H Olefination/Asymmetric [4+1] Spirocyclization under a Simple CoII /Chiral Spiro Phosphoric Acid Binary System

An unprecedented enantioselective synthesis of spiro-γ-lactams via a sequential C-H olefination/asymmetric [4+1] spirocyclization under a simple Co^II /chiral spiro phosphoric acid (SPA) binary system is reported. A range of biologically important spiro-γ-lactams are obtained with high levels of enantioselectivity (up to 98 % ee). The concise, asymmetric synthesis of an aldose reductase inhibitor was successfully achieved. Notably, contrast to previous reports that relied on the use of cyclopentadienyl or its derivatives (achiral Cp*, Cp^tBu , or chiral Cp^x ) ligated Co^III complexes requiring tedious steps to prepare, cheap and commercially available cobalt(II) acetate tetrahydrate was used as an efficient precatalyst.

Twofold C-H Activation-Based Enantio- and Diastereoselective C-H Arylation Using Diarylacetylenes as Rare Arylating Reagents

C-H bond activation has been established as an attractive strategy to access axially chiral biaryls, and the most straightforward method is direct C-H arylation of arenes. However, the arylating source has been limited to several classes of reactive and bulky reagents. Reported herein is rhodium-catalyzed 1:2 coupling of diarylphosphinic amides and diarylacetylenes for enantio- and diastereoselective construction of biaryls with both central and axial chirality. This twofold C-H activation reaction stays contrast to the previously explored Miura-Satoh type 1:2 coupling of arenes and alkynes in terms of chemoselectivity and proceeded under mild conditions with the alkyne acting as a rare arylating reagent. Both C-H activation events are stereo-determining and are under catalyst control, with the 2^nd C-H activation being diastereo-determining in a remote fashion. Analysis of the stereochemistry of the major and side products suggests moderate enantioselectivity of the initial C-H activation-desymmetrization process. However, the minor (R) rhodium vinyl intermediate is consumed more readily in undesired protonolysis, eventually resulting in high enantio- and diastereoselectivity of the major product.

Highly Enantioselective Iridium(I)-Catalyzed Hydrocarbonation of Alkenes: A Versatile Approach to Heterocyclic Systems Bearing Quaternary Stereocenters

We report a versatile, highly enantioselective intramolecular hydrocarbonation reaction that provides a direct access to heteropolycyclic systems bearing chiral quaternary carbon stereocenters. The method, which relies on an iridium(I)/bisphosphine chiral catalyst, is particularly efficient for the synthesis of five-, six- and seven-membered fused indole and pyrrole products, bearing one and two stereocenters, with enantiomeric excesses of up to >99 %. DFT computational studies allowed to obtain a detailed mechanistic profile and identify a cluster of weak non-covalent interactions as key factors to control the enantioselectivity.

Atropo-Enantioselective Oxidation-Enabled Iridium(III)-Catalyzed C-H Arylations with Aryl Boronic Esters

Atropo-enantioselective biaryl coupling through C-H bond functionalization is an emerging technology allowing direct construction of axially chiral molecules. This approach is largely limited to electrophilic coupling partners. We report a highly atropo-enantioselective C-H arylation of tetralone derivatives paired with aryl boronic esters as nucleophilic components. The transformation is catalyzed by chiral cyclopentadienyl (Cpx ) iridium(III) complexes and enabled by oxidatively enhanced reductive elimination from high-valent cyclometalated Ir-species.

Reusable Manganese Catalyst for Site-Selective Pyridine C-H Arylations and Alkylations

Herein, we disclose a recyclable, hybrid manganese catalyst for site‐selective azine C−H activation by weak amide assistance. The novel, reusable catalyst enabled C3–H arylation and C3–H alkylation with ample scope, and was characterized by detailed transmission electron microscopy analysis.

Earth-abundant Metal-catalyzed Reductive Amination: Recent Advances and Prospect for Future Catalysis

Nitrogen-containing compounds, as an important class of chemicals, have been used widely in pharmaceuticals, materials synthesis. Transition metal-catalyzed reductive amination of an aldehyde or a ketone with ammonia or an amine has been proved to be an efficient and practical method for the preparation of nitrogen-containing compounds in academia and industry for a century. Given the above, several effective methods using transition metals have been developed in recent years. Noble transition metals like Pd, Pt, and Au-based catalysts have been predominately used in reductive amination. Because of their high prices, strict official regulations of residues in pharmaceuticals, and deleterious effects on the biological system, their industrial applications are severely hampered. With the increasing sustainable and environmental problems, the Earth-abundant transition metals including Ti, Fe, Co, Ni, and Zr have also been investigated for the reductive amination reaction and showed great potential to the advancement of sustainable and cost-effective reductive amination processes. This critical review will mainly summarize the work using Earth-abundant metals. The effects of different transition metals used in catalytic reduction amination were discussed and compared, and some suggestions were given. The last section highlights the catalytic activities of bi- and tri-metallic catalysts. Indeed, this latter family is very promising and simultaneously benefits from increased stability, and selectivity, compared to monometallic NPs, due to synergistic substrate activation. Few comprehensive reviews focusing on Earth-abundant transition metals catalyst has been published since 1948, although several authors reported some summaries dealing with one or the other part of this aspect. It is hoped that this critical review will inspire researchers to develop new efficient and selective earth-abundant metal catalysts for highly, environmentally sustainable reductive amination methods, as well as improve the pharmaceutical industry and related chemical synthesis company traditional method with the utilization of the green method widely.

Rhodium-Catalyzed C-H Activation-Based Construction of Axially and Centrally Chiral Indenes through Two Discrete Insertions

Reported herein is asymmetric [3+2] annulation of arylnitrones with different classes of alkynes catalyzed by chiral rhodium(III) complexes, with the nitrone acting as an electrophilic directing group. Three classes of chiral indenes/indenones have been effectively constructed, depending on the nature of the substrates. The coupling system features mild reaction conditions, excellent enantioselectivity, and high atom-economy. In particular, the coupling of N-benzylnitrones and different classes of sterically hindered alkynes afforded C-C or C-N atropochiral pentatomic biaryls with a C-centered point-chirality in excellent enantio- and diastereoselectivity (45 examples, average 95.6 % ee). These chiral center and axis are disposed in a distal fashion and they are constructed via two distinct migratory insertions that are stereo-determining and are under catalyst control.

Evolution of Earth-Abundant 3 d-Metallaelectro-Catalyzed C-H Activation: From Chelation-Assistance to C-H Functionalization without Directing Groups

Catalyzed C-H functionalizations have emerged as a transformative platform for molecular syntheses. Despite of indisputable advances, oxidative C-H activations have been largely restricted to precious transition metals and stoichiometric amounts of chemical oxidants. In contrast, we herein discuss the potential of earth-abundant, environmentally-benign 3d transition metals for C-H activation, which has recently gained major momentum. Thus, a strategy for full resource economy has been established in our group, with green electricity as a renewable redox agent, giving valuable hydrogen as the sole byproduct under redox mediator-free conditions. In this account, we detail our accomplishments in 3d metallaelectrocatalysis towards green syntheses until March 2021.

Enantioselective Three-Component Coupling of Heteroarenes, Cycloalkenes and Propargylic Acetates

Asymmetric coupling proceeds efficiently between propargylic acetates, cycloalkenes and electron-rich heteroarenes including indoles, pyrroles, activated furans and thiophenes. 2,3-Disubstituted tetrahydrofurans and pyrrolidines are produced in trans configuration and excellent enantiomeric ratios. The reaction proceeds via Wacker-type attack of nucleophilic heteroarenes on alkenes activated by allenyl Pd^II species.

Tris(pentafluoroethyl)difluorophosphorane: A Versatile Fluoride Acceptor for Transition Metal Chemistry

Fluoride abstraction from different types of transition metal fluoride complexes [Ln MF] (M=Ti, Ni, Cu) by the Lewis acid tris(pentafluoroethyl)difluorophosphorane (C2 F5 )3 PF2 to yield cationic transition metal complexes with the tris(pentafluoroethyl)trifluorophosphate counterion (FAP anion, [(C2 F5 )3 PF3 ]- ) is reported. (C2 F5 )3 PF2 reacted with trans-[Ni(iPr2 Im)2 (ArF )F] (iPr2 Im=1,3-diisopropylimidazolin-2-ylidene; ArF =C6 F5 , 1 a; 4-CF3 -C6 F4 , 1 b; 4-C6 F5 -C6 F4 , 1 c) through fluoride transfer to form the complex salts trans-[Ni(iPr2 Im)2 (solv)(ArF )]FAP (2 a-c[solv]; solv=Et2 O, CH2 Cl2 , THF) depending on the reaction medium. In the presence of stronger Lewis bases such as carbenes or PPh3 , solvent coordination was suppressed and the complexes trans-[Ni(iPr2 Im)2 (PPh3 )(C6 F5 )]FAP (trans-2 a[PPh3 ]) and cis-[Ni(iPr2 Im)2 (Dipp2 Im)(C6 F5 )]FAP (cis-2 a[Dipp2 Im]) (Dipp2 Im=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) were isolated. Fluoride abstraction from [(Dipp2 Im)CuF] (3) in CH2 Cl2 or 1,2-difluorobenzene led to the isolation of [{(Dipp2 Im)Cu}2 ]2+ 2 FAP- (4). Subsequent reaction of 4 with PPh3 and different carbenes resulted in the complexes [(Dipp2 Im)Cu(LB)]FAP (5 a-e, LB=Lewis base). In the presence of C6 Me6 , fluoride transfer afforded [(Dipp2 Im)Cu(C6 Me6 )]FAP (5 f), which serves as a source of [(Dipp2 Im)Cu)]+ . Fluoride abstraction of [Cp2 TiF2 ] (7) resulted in the formation of dinuclear [FCp2 Ti(μ-F)TiCp2 F]FAP (8) (Cp=η5 -C5 H5 ) with one terminal fluoride ligand at each titanium atom and an additional bridging fluoride ligand.

Innovative Synthetic Procedures for Luminogens Showing Aggregation-Induced Emission

As a consequence of their intrinsic advantageous properties, luminogens that show aggregation-induced emission (AIEgens) have received increasing global interest for a wide range of applications. Whereas general synthetic methods towards AIEgens largely rely on tedious procedures and limited reaction types, various innovative synthetic methods have now emerged as complementary, and even alternative, strategies. In this Review, we systematically highlight advancements made in metal-catalyzed functionalization and metal-free-promoted pathways for the construction of AIEgens over the past five years, and briefly illustrate new perspectives in this area. The development of innovative synthetic procedures will enable the facile synthesis of AIEgens with great structural diversity for multifunctional applications.

Recyclable Ruthenium Catalyst for Distal meta-C-H Activation

We disclose the unprecedented hybrid-ruthenium catalysis for distal meta-C-H activation. The hybrid-ruthenium catalyst was recyclable, as was proven by various heterogeneity tests, and fully characterized with various microscopic and spectroscopic techniques, highlighting the physical and chemical stability. Thereby, the hybrid-ruthenium catalysis proved broadly applicable for meta-C-H alkylations of among others purine-based nucleosides and natural product conjugates. Additionally, its versatility was further reflected by meta-C-H activations through visible-light irradiation, as well as para-selective C-H activations.