Supported Ce/Zr pyrochlore monolayers as a route to single cerium atom catalysts with low temperature reducibility

The combination of structural characterization at atomic resolution, chemical data, and theoretical insights has revealed the unique nanostructures which develop in ceria supported on yttria-stabilized zirconia (YSZ) after being submitted to high-temperature reducing treatments. The results show that just a small ceria loading is needed for creating a supported Zr-rich pyrochlore (111) nanostructure, resembling the structure of single cerium atom catalysts. The specific atomic arrangement of this nanostructure allows to explain the improvement of the reducibility at low temperature. The reduction mechanism can be extrapolated to ceria-zirconia mixed oxides with pyrochlore-like cationic ordering, exposing Zr-rich (111) surfaces. The results gathered here provide key information to understand the redox behavior of these types of systems, which may contribute to improving the design of new ceria-zirconia based materials, with lower content of the lanthanide element, nearly 100% cerium atom utilization, and applications in environmental catalysis.

Hydride Generation on the Cu-Doped CeO2(111) Surface and Its Role in CO2 Hydrogenation Reactions

Ceria-based catalysts exhibit great activity in catalyzing selective hydrogenation of CO2 to methanol. However, the underlying mechanism of this reaction, especially the generation of active H species, remains unclear. In this work, we performed extensive density functional theory calculations corrected by on-site Coulomb interaction (DFT + U) to investigate the H2 dissociation and the reaction between the active H species and CO2 on the pristine and Cu-doped CeO2(111) (denoted as Cu/CeO2(111)) surfaces. Our calculations evidenced that the heterolytic H2 dissociation for hydride generation can more readily occur on the Cu/CeO2(111) surface than on the pristine CeO2(111) surface. We also found that the Cu dopant can facilitate the formation of surface oxygen vacancies, further promoting the generation of hydride species. Moreover, the adsorption of CO2 and the hydrogenation of CO2 to HCOO* can be greatly promoted on the Cu/CeO2(111) surface with hydride species, which can lead to the high activity and selectivity toward CO2 hydrogenation to methanol.

Interaction of Hydrogen with Ceria: Hydroxylation, Reduction, and Hydride Formation on the Surface and in the Bulk

The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO2 ) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO2 (111) thin films and CeO2 powders, and theoretical calculations of CeO2 (111) surfaces with oxygen vacancies (Ov ) at the surface and in the bulk. We show that, on a stoichiometric CeO2 (111) surface, H2 dissociates and forms surface hydroxyls (OH). On the pre-reduced CeO2-x samples, both films and powders, hydroxyls and hydrides (Ce-H) are formed on the surface as well as in the bulk, accompanied by the Ce3+ ↔ Ce4+ redox reaction. As the Ov concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At higher temperatures, surface hydroxyls can react to produce water and create additional oxygen vacancies, increasing its concentration, which controls the H2 /CeO2 interaction. The results demonstrate a large diversity of reaction pathways, which have to be taken into account for better understanding of reactivity of ceria-based catalysts in a hydrogen-rich atmosphere.

Ultra-Fine CeO2 Particles Triggered Strong Interaction with LaFeO3 Framework for Total and Preferential CO Oxidation

Interactions between the active components with the support are one of the fundamentally factors in determining the catalytic performance of a catalyst. In contrast to the comprehensive understanding on the strong metal-support interactions (SMSI) in metal-based catalysts, it remains unclear for the interactions among different oxides in mixed oxide catalysts due to its complexity. In this study, we investigated the interaction between CeO₂ and LaFeO₃, the two important oxygen storage materials in catalysis area, by tuning the sizes of CeO₂ particles and highlight a two-fold effect of the strong oxide-oxide interaction in determining the catalytic activity and selectivity for preferential CO oxidation in hydrogen feeds. It is found that the anchoring of ultra-fine CeO₂ particles (<2 nm) at the framework of three-dimensional-ordered macroporous LaFeO₃ surface results in a strong interaction between the two oxides that induces the formation of abundant uncoordinated cations and oxygen vacancy at the interface, contributing to the improved oxygen mobility and catalytic activity for CO oxidation. Hydrogen spillover, which is an important evidence of the strong metal-support interactions in precious metal catalysts supported by reducible oxides, is also observed in the H₂ reduction process of CeO₂/LaFeO₃ catalyst due to the presence of ultra-fine CeO₂ particles (<2 nm). However, the strong interaction also results in the formation of surface hydroxyl groups, which when combined with the hydrogen spillover reduces the selectivity for preferential CO oxidation. This discovery demonstrates that in hybrid oxide-based catalysts, tuning the interaction among different components is essential for balancing the catalytic activity and selectivity.

Controlling the Oxidation State of Pt Single Atoms for Maximizing Catalytic Activity

Single-atom catalysts (SACs) have emerged as promising materials in heterogeneous catalysis. Previous studies reported controversial results about the relative level in activity for SACs and nanoparticles (NPs). These works have focused on the effect of metal atom arrangement, without considering the oxidation state of the SACs. Here, we immobilized Pt single atoms on defective ceria and controlled the oxidation state of Pt SACs, from highly oxidized (Pt⁰ : 16.6 at %) to highly metallic states (Pt⁰ : 83.8 at %). The Pt SACs with controlled oxidation states were then employed for oxidation of CO, CH₄ , or NO, and their activities compared with those of Pt NPs. The highly oxidized Pt SACs presented poorer activities than Pt NPs, whereas metallic Pt SACs showed higher activities. The Pt SAC reduced at 300 °C showed the highest activity for all the oxidations. The Pt SACs with controlled oxidation states revealed a crucial missing link between activity and SACs.

Water-Assisted Homolytic Dissociation of Propyne on a Reduced Ceria Surface

The emergence of ceria (CeO₂) as an efficient catalyst for the selective hydrogenation of alkynes has attracted great attention. Intensive research effort has been devoted to understanding the underlying catalytic mechanism, in particular the H₂–CeO₂ interaction. Herein, we show that the adsorption of propyne (C₃H₄) on ceria, another key aspect in the hydrogenation of propyne to propene, strongly depends on the degree of reduction of the ceria surface and hydroxylation of the surface, as well as the presence of water. The dissociation of propyne and the formation of methylacetylide (CH₃CC‐) have been identified through the combination of infrared reflection absorption spectroscopy (IRAS) and DFT calculations. We demonstrate that propyne undergoes heterolytic dissociation on the reduced ceria surface by forming a methylacetylide ion on the oxygen vacancy site and transferring a proton to the nearby oxygen site (OH group), while a water molecule that competes with the chemisorbed methylacetylide at the vacancy site assists the homolytic dissociation pathway by rebounding the methylacetylide to the nearby oxygen site.